EPIA PCI slot

[Brian G. Rhodes]

The reason I was not getting interrupts on devices in the pci slot on the
EPIA is because they were not set to be bus masters, so they would never
generate interrupts.  A quick write to the command register fixed the
problem.  Command register is being set to 0x02.  It should be set to
0x06.  a 6 to 4.

I haven't looked to see if this is pervasive throughout linuxbios, or if
for other boards this is handled specifically, but it is a bug.

Brian G Rhodes
bgr at linespeed.net
brhodes at visualcircuits.com
+1 612-741-1191