tusl2-c with kernel

Yap Ee Huey yapeehuey at hotmail.com
Fri Jun 6 03:24:01 CEST 2003

Hi all,

After failing to load with both Etherboot and ADLO, I tried to reduce the 
size of
kernel to 192k bytes ( which can only boot and execute simple command )  to
fit into my 256k rom. But after "Jumping to boot code", it reboots. Does 
that mean
my ram initialization is buggy ? Thanks. Below is my log :


Wrote linuxbios table at: 00000500 - 0000065c  checksum 2d0c
Jumping to linuxbiosmain()...

Welcome to start32, the open sourced starter.
This space will eventually hold more diagnostic information.
January 2000, James Hendricks, Dale Webster, and Ron Minnich.
Version 0.1

    37:init_bytes() - zkernel_start:0xfffc0000  zkernel_mask:0x0000ffff

Gunzip setup
output data is 0x00100000
Gunzipping boot code
flush 0x00100000 count 0x00008000
flush 0x00108000 count 0x00008000
flush 0x00110000 count 0x00008000
flush 0x00118000 count 0x00008000
flush 0x00120000 count 0x00008000
flush 0x00128000 count 0x00008000
flush 0x00130000 count 0x00008000
flush 0x00138000 count 0x00008000
flush 0x00140000 count 0x00008000
flush 0x00148000 count 0x00008000
flush 0x00150000 count 0x00008000
flush 0x00158000 count 0x00008000
flush 0x00160000 count 0x00000b30
command line - [root=/dev/hda5]
Jumping to boot code

LinuxBIOS-1.0.0 Fri Jun 6 20:09:28 EDT 2003 starting...
Ram Enable 1
Ram Enable 2
Ram Enable 3
Ram Enable 4
Ram Enable 5

Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.

Download the latest MSN Messenger http://messenger.msn.com.my

More information about the coreboot mailing list