files to be placed in target?
Kyuwan Jung
Qwani at hanafos.com
Thu Jul 17 22:31:01 CEST 2003
Sorry for omitting answer for your question.
how stupid was I~
You should write 'linuxbios.rom' to your flash rom.
Check first ROM_IMAGE_SIZE and ROM_SIZE in your nano.config
fit to your flash rom.
----- Original Message -----
From: "Devi Priya" <ijpriya at hotmail.com>
To: <linuxbios at clustermatic.org>
Sent: Thursday, July 17, 2003 12:52 PM
Subject: files to be placed in target?
> Hello,
>
>
> I compiled the linuxbios for mainboard nano (sc1200). I want my
> bios program in my Flash ROM (4MB). My kernel image will be in hard disk.
>
> These are my generated files.
>
> linuxbios_payload.nrv2b
> nrv2b
> linuxbios.rom
> linuxbios.strip
> payload.block
> linux.bin.gz
> linuxbios
> linuxbios.a
> romimage
> linuxbios_c
> linuxbios_payload
> linuxbios_payload.bin
>
> Out of these files which files are to be placed in my Flash ROM
> and hard disk in my target? I assume linuxbios.rom is placed in Flash Rom,
> linux.bin.gz placed in hard disk. Is it correct? But I have no clear cut
> idea with what other files satnds for? Plzz even if I question looks too
> preliminary help me.
>
> _________________________________________________________________
> Are you Unmarried? http://www.bharatmatrimony.com/cgi-bin/bmclicks1.cgi?4d
> Register in India's No 1 Matrimony
>
> _______________________________________________
> Linuxbios mailing list
> Linuxbios at clustermatic.org
> http://www.clustermatic.org/mailman/listinfo/linuxbios
>
More information about the coreboot
mailing list