problems with pchips 810lmr

Paulo Richards p.richards at overclockers.cl
Mon Jan 27 19:34:01 CET 2003


Hi, i need help about linux bios
I have a 810lmr with an athlon xp 1500+ cpu, and 160MB of ram.
Also i get a DoC to put linux bios on it, i follow the sis630 guide from
the linuxbios website and the Antony Stone's personal experience guide,
i follow every single step, and it's seems to be ok, but when i reboot
the mainboard there's no output on the monitor (don't even a blink), the
keyboard leds (caps lock and scroll lock) start to blink and the hard
drive seems to work (it make noise).
So, i hook up a serial cable for listening the serial port and this is
what i get (attached file).

It's seems to be fine for me, but i don't really know what exactly
means...

There's anyone could help me?
What i did wrong?

Thanks

Paulo Richards 

-------------- next part --------------
LinuxBIOS-1.0.0 Mon Jan 27 19:49:10 CLST 2003 starting...
Copying LinuxBIOS to ram.
Jumping to LinuxBIOS.
LinuxBIOS-1.0.0 Mon Jan 27 19:49:10 CLST 2003 booting...
Finding PCI configuration type.
PCI: Using configuration type 1
handle_superio start, nsuperio 1
handle_superio Pass 0, check #0, s 0000ba00 s->super 0000bcb8
handle_superio: Pass 0, Superio SiS 950
handle_superio  port 0x0, defaultport 0x2e
handle_superio  Using port 0x2e
handle_superio Pass 0, done #0
handle_superio done
Scanning PCI bus...PCI: pci_scan_bus for bus 0
PCI: 00:00.0 [1039/0730]
PCI: 00:00.1 [1039/5513]
PCI: 00:01.0 [1039/0008]
PCI: 00:01.1 [1039/0900]
PCI: 00:01.2 [1039/7001]
PCI: 00:01.3 [1039/7001]
PCI: 00:01.4 [1039/7018]
PCI: 00:01.6 [1039/7013]
PCI: 00:02.0 [1039/0001]
PCI: 00:0b.0 [1105/8300]
PCI: pci_scan_bus for bus 1
PCI: 01:00.0 [1039/6300]
PCI: pci_scan_bus returning with max=01
PCI: pci_scan_bus returning with max=01
done
Allocating PCI resources...
ASSIGN RESOURCES, bus 0
PCI: 00:00.0 10 <- [0xf8000000 - 0xfbffffff] mem
PCI: 00:00.1 10 <- [0x00002c90 - 0x00002c93] io
PCI: 00:00.1 14 <- [0x00002ca0 - 0x00002ca3] io
PCI: 00:00.1 18 <- [0x00002cb0 - 0x00002cb3] io
PCI: 00:00.1 1c <- [0x00002cc0 - 0x00002cc3] io
PCI: 00:00.1 20 <- [0x00002c80 - 0x00002c8f] io
PCI: 00:01.1 10 <- [0x00002000 - 0x000020ff] io
PCI: 00:01.1 14 <- [0xfc200000 - 0xfc200fff] mem
PCI: 00:01.2 10 <- [0xfc201000 - 0xfc201fff] mem
PCI: 00:01.3 10 <- [0xfc202000 - 0xfc202fff] mem
PCI: 00:01.4 10 <- [0x00002400 - 0x000024ff] io
PCI: 00:01.4 14 <- [0xfc203000 - 0xfc203fff] mem
PCI: 00:01.6 10 <- [0x00002800 - 0x000028ff] io
PCI: 00:01.6 14 <- [0x00002c00 - 0x00002c7f] io
PCI: 00:02.0 1c <- [0x00001000 - 0x00001fff] bus 1 io
PCI: 00:02.0 24 <- [0xf0000000 - 0xf7ffffff] bus 1 prefmem
PCI: 00:02.0 20 <- [0xfc000000 - 0xfc0fffff] bus 1 mem
ASSIGN RESOURCES, bus 1
PCI: 01:00.0 10 <- [0xf0000000 - 0xf7ffffff] prefmem
PCI: 01:00.0 14 <- [0xfc000000 - 0xfc01ffff] mem
PCI: 01:00.0 18 <- [0x00001000 - 0x0000107f] io
ASSIGNED RESOURCES, bus 1
PCI: 00:0b.0 10 <- [0xfc100000 - 0xfc1fffff] mem
ASSIGNED RESOURCES, bus 0
Allocating VGA resource
done.
Enabling PCI resourcess...PCI: 00:00.0 cmd <- 07
PCI: 00:00.1 cmd <- 01
PCI: 00:01.0 cmd <- 0c
PCI: 00:01.1 cmd <- 03
PCI: 00:01.2 cmd <- 02
PCI: 00:01.3 cmd <- 02
PCI: 00:01.4 cmd <- 03
PCI: 00:01.6 cmd <- 01
PCI: 00:02.0 cmd <- 27
PCI: 00:0b.0 cmd <- 02
PCI: 01:00.0 cmd <- 03
done.
Initializing PCI devices...
PCI devices initialized
totalram: 152M
Initializing CPU #0
Enabling cache...
Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) type: WB
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range:  128MB, type WB
Setting variable MTRR 1, base:  128MB, range:   16MB, type WB
Setting variable MTRR 2, base:  144MB, range:    8MB, type WB
DONE variable MTRRs
Clear out the extra MTRR's
call intel_enable_fixed_mtrr()
call intel_enable_var_mtrr()
Leave setup_mtrrs
done.

Max cpuid index    : 1
Vendor ID          : AuthenticAMD
Processor Type     : 0x00
Processor Family   : 0x06
Processor Model    : 0x03
Processor Mask     : 0x00
Processor Stepping : 0x01
Feature flags      : 0x0183f9ff


MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

Disabling local apic...done.
CPU #0 Initialized
Enabled in SIS 503 regs 0x40 and 0x45
Shadow memory disabled in SiS 730
handle_superio start, nsuperio 1
handle_superio Pass 1, check #0, s 0000ba00 s->super 0000bcb8
handle_superio: Pass 1, Superio SiS 950
handle_superio  port 0x2e, defaultport 0x2e
handle_superio  Using port 0x2e
handle_superio Pass 1, done #0
handle_superio done
PCCHIPS M810LMR (and similar)...Entering the initregs process
Southbridge fixup done for SIS 503
handle_superio start, nsuperio 1
handle_superio Pass 2, check #0, s 0000ba00 s->super 0000bcb8
handle_superio: Pass 2, Superio SiS 950
handle_superio  port 0x2e, defaultport 0x2e
handle_superio  Using port 0x2e
  Call finishup
handle_superio Pass 2, done #0
handle_superio done
Copying IRQ routing tables to 0xf0000...done.
Verifing priq routing tables copy at 0xf0000...succeed
Wrote linuxbios table at: 00000500 - 00000664  checksum cba
Jumping to linuxbiosmain()...

Welcome to start32, the open sourced starter.
This space will eventually hold more diagnostic information.

January 2000, James Hendricks, Dale Webster, and Ron Minnich.
Version 0.1

init_bytes
Gunzip setup
gunzip_setup
output data is 0x00100000
Gunzipping boot code
    43:fill_inbuf() - ram buffer:0x00018b70
done memcpy_from_doc_mil
    53:fill_inbuf() - nvram:0x00010000  block_count:0
inbuf[0] is 0x1f
flush 0x00100000 count 0x00008000
flush 0x00108000 count 0x00008000
flush 0x00110000 count 0x00008000
flush 0x00118000 count 0x00008000
done memcpy_from_doc_mil
    53:fill_inbuf() - nvram:0x00020000  block_count:1
inbuf[0] is 0x3c
flush 0x00120000 count 0x00008000
flush 0x00128000 count 0x00008000
flush 0x00130000 count 0x00008000
flush 0x00138000 count 0x00008000
done memcpy_from_doc_mil
    53:fill_inbuf() - nvram:0x00030000  block_count:2
inbuf[0] is 0x4d
flush 0x00140000 count 0x00008000
flush 0x00148000 count 0x00008000
flush 0x00150000 count 0x00008000
done memcpy_from_doc_mil
    53:fill_inbuf() - nvram:0x00040000  block_count:3
inbuf[0] is 0x94
flush 0x00158000 count 0x00008000
flush 0x00160000 count 0x00008000
flush 0x00168000 count 0x00008000
flush 0x00170000 count 0x00008000
done memcpy_from_doc_mil
    53:fill_inbuf() - nvram:0x00050000  block_count:4
inbuf[0] is 0xd7
flush 0x00178000 count 0x00008000
flush 0x00180000 count 0x00008000
flush 0x00188000 count 0x00008000
flush 0x00190000 count 0x00008000
done memcpy_from_doc_mil
    53:fill_inbuf() - nvram:0x00060000  block_count:5
inbuf[0] is 0xc5
flush 0x00198000 count 0x00008000
flush 0x001a0000 count 0x00008000
flush 0x001a8000 count 0x00008000
flush 0x001b0000 count 0x00008000
flush 0x001b8000 count 0x00008000
done memcpy_from_doc_mil
    53:fill_inbuf() - nvram:0x00070000  block_count:6
inbuf[0] is 0x74
flush 0x001c0000 count 0x00008000
flush 0x001c8000 count 0x00008000
flush 0x001d0000 count 0x00008000
flush 0x001d8000 count 0x00008000
done memcpy_from_doc_mil
    53:fill_inbuf() - nvram:0x00080000  block_count:7
inbuf[0] is 0xc2
flush 0x001e0000 count 0x00008000
flush 0x001e8000 count 0x00008000
flush 0x001f0000 count 0x00008000
flush 0x001f8000 count 0x00008000
flush 0x00200000 count 0x00008000
flush 0x00208000 count 0x00005f00
<983> fini_bytes

command line - [root=/dev/hda1 console=ttyS0,115200 console=tty0 single]
Jumping to boot code


More information about the coreboot mailing list