440bx build failure

[Richard A. Smith]

On Sat, 25 Jan 2003 23:55:56 -0700 (MST), Ronald G. Minnich wrote:

> richard, here is a known-good config file for the digital logic 

Man there is some serious lag from when I send a post and when it
finally hits the list.  I sent a response over an hour ago and its
still not there.

Well anyway.  I got the smartcore-p3 config to do something. 
Actually it worked the first time I just didn't have my serial cable
plugged back in.  Duh!.

The bad news is it dosen't do anything different than my config file.
 When it jumps to Linuxbios in ram it crashes.  

Which is really not suprising since my config file and the smarcore
are pretty much identical.  I didn't have the L440BX option set but
grepping the tree dosen't show that option as doing anything.  The
only place it shows up is in a compiler flag setting in the intel
mainboard dir which isn't called.

I think I'm going to try and hardcode some conservative memory
settings and see if I can get something going,


--
Richard A. Smith                         Bitworks, Inc.               
rsmith at bitworks.com               479.846.5777 x104                        
Sr. Design Engineer        http://www.bitworks.com