irq_routing_table can't be copied to 0xf0000

[zhu shi song]

evoc mainboard specififaction: 
on-board NS GX1 233Mhz(fanless) 
NS CS5530A 
winbond83977f 
realtek rtl8139C 
 
attached file is linux kern boot mesgs. 
 "Ronald G. Minnich" <rminnich at lanl.gov> wrote: On Wed, 26 Feb 2003, zhu shi song wrote:

> 
> usb's irq is still incorrect. under normal linux, usb's irq is 15, but
> under linuxbios the irq is 10. so usb can't work correctly. what's the
> correct step to run getpir? what's the rule for linux kernel to assign
> pci irq according to irq routing table? thanks

There is a chance that the PIR on the standard BIOS is wrong!

This happens. We've seen cases where the BIOS settings do not agree with 
the PIR settings, and the BIOS is just setting in the correct interrupt. 

What board is this again (Sorry I forgot)

ron

_______________________________________________
Linuxbios mailing list
Linuxbios at clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios


---------------------------------
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, and more
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20030227/25011d2e/attachment.html>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: 123.txt
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20030227/25011d2e/attachment.txt>