SiS630 flash_rom & various flash parts

[Alexander Amelkin]

Hello ollie!

  As far as I understand, it's you, Ollie, who wrote that flash_rom
  program? My SiS630e board (pcchips m787cl+) has an EON EN29F002NT
  flash part on it and I also have a spare old 1Mbit SST29EE010 part.
  I saw the program supports SST29EE020... I thought (just an
  assumption) that SST29EE010 may be similar to SST29EE020 in all but
  the size, so I patched your program a little (added a record to the
  flashchips array and also added some #define's to flash.h) so it
  agreed to flash my spare chip. Unfortunately it didn't work. The
  flash_rom pretends to work, but quits after "Verifying 0x00000001".
  The board doesn't boot and when I place the EON part back in place,
  the board's CMOS turns out to be ruined.

  Can you imlement a correct support for SST29EE010 please? It has a
  sufficient size to put a linuxbios in there, so I'd like to use that
  part if possible. I hope it is electrically compatible with the
  SST29EE020 and EON EN29F002NT?

  I tried to find any of the parts you supports in local stores, but
  didn't find anything from that list that would suit my motherboard
  (I need a DIP32 chip). :(

With best regards,
Alexander  mailto:spirit at reactor.ru