help
xu xuning
xuning1979 at hotmail.com
Fri Feb 21 03:37:01 CET 2003
Hello everyone:
I have used Kernel-2.4.19_CWLINUX_4 from
http://www.cwlinux.com/downloads/linuxbios-sdk/kernel/2.4.19/ but failed!
my machine is winfast6300 MA Pro (doc md2800-d08 on i686), and through
the console ( i use hypertrm.exe from windows on another machine),the
information is following:
######################################################
LinuxBIOS-1.0.0 Mon Jan 20 15:34:48 EST 2003 starting...
Copying LinuxBIOS to ram.
LinuxBIOS-1.0.0 Mon Jan 20 15:34:48 EST 2003 booting...
Finding PCI configuration type.
PCI: Using configuration type 1
handle_superio start, s 0000ce80 nsuperio 1 s->super 0000e1f8
handle_superio Pass 0, check #0, s 0000ce80 s->super 0000e1f8
handle_superio: Pass 0, Superio SiS 950
handle_superio port 0x0, defaultport 0x2e
handle_superio Using port 0x2e
handle_superio Pass 0, done #0
handle_superio done
Scanning PCI bus...PCI:
PCI: 00:00.0 [1039/0630]
PCI: 00:00.1 [1039/5513]
PCI: 00:01.0 [1039/0008]
PCI: 00:01.1 [1039/0900]
PCI: 00:01.2 [1039/7001]
PCI: 00:01.3 [1039/7001]
PCI: 00:01.4 [1039/7018]
PCI: 00:01.6 [1039/7013]
PCI: 00:02.0 [1039/0001]
PCI: pci_scan_bus for bus 1
PCI: 01:00.0 [1039/6300]
PCI: pci_scan_bus returning with max=01
PCI: pci_scan_bus returning with max=01
done
totalram:56M
Initializing CPU #0
Updating microcode
microcode_info: sig = 0x00000683 pf=0x00000010 rev = 0x00000000
Enabling cache...
Setting fixed MTRRs(0-88
Setting fixed MTRRs(0-16) type:HB
DONE fixed MTRRs
Setting variable MTRR 0 , base: 0MB,range: 32MB,type HB
Setting variable MTRR 1 , base: 32MB,range: 16MB, type HB
Setting variable MTRR 2, base: 48MB, range: 8MB, type HB
DONE variable MTRRs
Clear out the extra MTRR's
call intel_enable_fixed_mtrr()
call intel_enable_var_mtrr()
Leave setup_mtrrs
done.
Max cpuid index :2
Vendor ID :GenuineIntel
Processor Type :0x00
Processor Family :0x06
Processor Model :0x08
Processor Mask
Processor Stepping:0x03
Feature flags :0x0383fbff
Cache/TLB descriptor values: 1 reads required
Desc 0x01 : Instr TLB:4KB pages, 4-way set assoc,32 entries
Desc 0x02 : Instr TLB:4MB pages,fully assoc,2 entries
Desc 0x03 : Data TLB: 4KB pages,4-way set assoc, 64 entries
Desc 0x00 : null
Desc 0x00 : null
Desc 0x00 : null
Desc 0x00 : null
Desc 0x00 : null
Desc 0x00 : null
Desc 0x00 : null
Desc 0x00 : null
Desc 0x41 : L2 Unified cache: 128K bytes, 4-way set assoc, 32 byte line
size
Desc 0x08 : Inst cache: 16K bytes,4-way set assoc,32 byte line size
Desc 0x04 : Data TLB:4MB pages,4-way set assoc,8 entries
Desc 0x0c : Data cache:16K bytes,2-way or 4-way or 4-way set assoc,32 byte
line size
MTRR check
Fixed MTRRs: Enabled
Variable MTRRs: Enabled
Configuring L2 cache...CPU signature of 680 so no L2 cache configuration
Enable Cache
done.
Disabling local apic...done
CPU #0 Initialized
Allocating PCI resources...
ASSIGN RESOURCES, bus 0
PCI: 00:00.0 10 <- [0x8000000 - 0xfbffffff] mem
PCI: 00:00.1 10 <- [0x00002c90 - 0x00002c93] io
PCI: 00:00.1 14 <- [0x00002ca0 - 0x00002ca3] io
PCI: 00:00.1 18 <- [0x00002cb0 - 0x00002cb3] io
PCI: 00:00.1 1c <- [0x00002cc0 - 0x00002cc3] io
PCI: 00:00.1 20 <- [0x00002c80 - 0x00002c83] io
PCI: 00:00.1 10 <- [0x00002000 - 0x000020ff] io
PCI: 00:01.1 14 <- [0xfc100000 - 0xfc100fff] mem
PCI: 00:01.2 10 <- [0xfc101000 - 0xfc101fff] mem
PCI: 00:01.3 10 <- [0xfc102000 - 0xfc102fff] mem
PCI: 00:01.4 10 <- [0x00002400 - 0x000024ff] io
PCI: 00:01.4 14 <- [0xfc103000 - 0
PCI: 00:01.6 10 <- [0x00002800 - 0x000028ff] io
PCI: 00:01.6 14 <- [0x00002c00 - 0x00002c7f] io
PCI: 00:02.0 1c <- [0x00001000 - 0x00001fff] bus 1 io
PCI: 00:02.0 24 <- [0xf0000000 - 0xf7ffffff] bus 1 prefmem
PCI: 00:02.0 20 <- [0xfc000000 - 0xfc0fffff] bus 1 mem
ASSIGN RESOURCES, bus 1
PCI: 01:00.0 10 <- [0xf0000000 - 0xf7ffffff] prefmem
PCI: 01:00.0 14 <- [0xfc000000 - 0xfc01ffff] mem
PCI: 01:00.0 18 <- [0x00001000 - 0x0000107f] io
Allocating VGA resource
done.
Enabling PCI resourcess...PCI: 00:00.0 cmd <- 0
PCI: 00:00.1 cmd <- 01
PCI: 00:01.0 cmd <- 0c
PCI: 00:01.1 cmd <- 03
PCI: 00:01.2 cmd <- 02
PCI: 00:01.3 cmd <- 02
PCI: 00:01.4 cmd <- 03
PCI: 00:01.6 cmd <- 01
PCI: 00:02.0 cmd <- 27
PCI: 01:00.0 cmd <- 03
done.
Initializing PCI devices...
PCI devices initialized
Enabled in SIS 503 regs 0x40 and 0x45
Now try to turn off shadow
device for SiS 630 is 0x127ec
Shadow memory disabled in SiS 630
handle_superio start, s 0000ce80 nsuperio 1 s->super 0000e1f8
handle_superio Pass 1, check #0, s 0000ce80 s->super 0000e1f8
handle_superio: Pass 1, Superio SiS 950
handle_superio port 0x2e, defaultport 0x2e
handle_superio Using port 0x2e
handle_superio Pass 1, done #0
handle_superio done
Winfast 6300 (and similar)...Entering the initregs process
Southbridge fixup done for SIS 503
handle_superio start, s 0000ce80 nsuperio 1 s->super 0000e1f8
handle_superio Pass 2, check #0, s 0000ce80 s->super 0000e1f8
handle_superio: Pass 2, Superio SiS 950
handle_superio port 0x2e, defaultport 0x2e
handle_superio Using port 0x2e
Call finishup
handle_superio Pass 2, done #0
handle_superio done
Checking IRQ routing
tables.../opt/cwlinux/freebios/src/arch/i386/lib/pirq_routing.c:
23: check_pirq_routiing_table() - irq_routing_table located at : 0x0000a94
done.
Copying IRQ routing tables to 0xf0000...done.
Wrote linuxbios table at : 00000500 - 0000067c checksum 7c69
Jumping to linuxbiosmain()...
Welcome to start32, the open sourced starter.
This space will eventually hold more diagnostic information.
Jamuary 2000 , James Hendricks, Dale Webster,and Ron
Version 0.1
init_bytes
Gunzip setup
gunzip_setup
output data is 0x00100000
Gunzipping boot code
42:fill_inbuf() - ram buffer:-0x0001afe4
done memcpy_from_doc_mil
52:fill_inbuf() - nvram:0x00010000 block_count:0
inbuf[0] is 0x1f
flush 0x00100000 count 0x00008000
flush 0x00108000 count 0x00008000
flush 0x00110000 count 0x00008000
flush 0x00118000 count 0x00008000
done memcpy_from_doc_mil
52:fill_inbuf() - nvram:0x00020000 block_count:1
inbuf[0] is 0x3b
flush 0x00120000 count 0x00008000
flush 0x00128000 co
flush 0x00130000 count 0x00008000
done memcpy_from_doc_mil
52:fill_inbuf() - nvram:0x00030000 block_count:2
inbuf[0] is 0xf1
flush 0x00138000 count 0x00008000
flush 0x00140000 count 0x00008000
flush 0x00148000 count 0x00008000
flush 0x00150000 count 0x00008000
done memcpy_from_doc_mil
52:fill_inbuf() - nvram:0x00040000 block_count:3
inbuf[0] is 0xe2
flush 0x00158000 count 0x00008000
flush 0x00160000 count 0x00008000
flush 0x00168000 count 0x00008000
done memcpy_from_doc_mil
52:fill_inbuf() - nvram:0x0
inbuf[0] is 0x4d
flush 0x00170000 count 0x00008000
flush 0x00178000 count 0x00008000
flush 0x00180000 count 0x00008000
flush 0x00188000 count 0x00008000
done memcpy_from_doc_mil
52:fill_inbuf() - nvram:0x00060000 block_count:5
inbuf[0] is 0x7e
flush 0x00190000 count 0x00008000
flush 0x00198000 count 0x00008000
flush 0x001a0000 count 0x00008000
done memcpy_from_doc_mil
52:fill_inbuf() - nvram:0x00070000 block_count:6
inbuf[0] is 0x5d
flush 0x001a8000 count 0x00008000
flush 0x001b0000 count 0x00008000
flush 0x001b8000 count 0x00008000
flush 0x001c0000 count 0x00008000
done memcpy_from_doc_mil
52:fill_inbuf() - nvram:0x00080000 block_count:7
inbuf[0] is 0x2d
flush 0x001c8000 count 0x00008000
flush 0x001d0000 count 0x00008000
flush 0x001d8000 count 0x00008000
flush 0x001e0000 count 0x00008000
done memcpy_from_doc_mil
52:fill_inbuf() - nvram:0x00090000 block_count:8
inbuf[0] is 0x6b
flush 0x001e8000 count 0x00008000
flush 0x001f0000 count 0x00008000
flush 0x001f8000 count 0x00008000
flush 0x00200000 count 0x00008000
flush 0x00208000 count 0x00008000
flush 0x00210000 count 0x00008000
done memcpy_from_doc_mil
52:fill_inbuf() - nvram:0x000a0000 block_count:9
inbuf[0] is 0x6e
flush 0x00218000 count 0x00008000
flush 0x00220000 count 0x00008000
flush 0x00228000 count 0x00008000
flush 0x00230000 count 0x00008000
done memcpy_from_doc_mil
52:fill_inbuf() - nvram:0x000b0000 block_count:10
inbuf[0] is 0x32
flush 0x00238000 count 0x00008000
flush 0x00240000 count 0x00008000
flush 0x00248000 count 0x00008000
flush 0x00250000 count 0x00003de0
<1001> fini_bytes
command line - [root=/dev/nftla console=ttyS0,115200 console=/dev/tty5
CONSOLE=/
dev/tty5 video=sisfb:640x480-8 at 60,font:VGA8x16]
Jumping to boot code
##################################################################
On my LinuxBIOS machine ,cann't get into the system and only a picture !
So can you tell me what's wrong with me and how to do next?
thanks a lot!
_________________________________________________________________
免费下载 MSN Explorer: http://explorer.msn.com/lccn/
More information about the coreboot
mailing list