S2880

YhLu YhLu at tyan.com
Wed Aug 6 18:07:00 CEST 2003


Ron,

It seems I can not enable XIP_ROM_SIZE and XIP_ROM_BASE. Even I have set
them in Options.lb

Regards

Yinghai Lu

-----邮件原件-----
发件人: YhLu 
发送时间: 2003年8月6日 15:17
收件人: YhLu; ebiederman at lnxi.com; ron minnich
抄送: Stefan Reinauer; linuxbios at clustermatic.org
主题: Re: S2880

Ron,

After swap _ROMBASE etc to after ROM_SECTION_SIZE and ROM_SECTION_OFFSET.  I
can switch to the normal mode.

But in fallback mode and normal mode ( after reboot) still got problem.

~ # cmos_util -d
# The CMOS Definition table was not found in ram
# CMOS definition table was not found in RAM memory
# Looking for definitions in cmos.layout file
Can not open config file cmos.layout


Regards

Yinghai Lu

-----邮件原件-----
发件人: YhLu 
发送时间: 2003年8月6日 11:18
收件人: 'ebiederman at lnxi.com'; ron minnich
抄送: Stefan Reinauer; linuxbios at clustermatic.org
主题: S2880


Eric,

It seems the image that built with can not switch to Normal booting.

1. In Fallback mode, after power on I can use cmos_util.
2. after rebooting it is still in Fallback mode,and can not cmos_util, it
said can not find option table in the ram. And can not access cmos.layout.

When I using old tool, I can switch to normal mode, but need to change
boot_option and last_boot from fallback to normal.

regards

Yinghai Lu




More information about the coreboot mailing list