Fixes for Tyan s2880

[YhLu]

Eric,

It works on 12G too.

Setting variable MTRR 0, base:    0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range:  512MB, type WB
Setting variable MTRR 3, base: 3584MB, range:  256MB, type WB
Setting variable MTRR 4, base: 4096MB, range: 4096MB, type WB
Setting variable MTRR 5, base: 8192MB, range: 4096MB, type WB

But I think you need to optimize mtrr.c now, otherwise it may not work with
arima Hadama. 8*2=16G, will use out MTRR.

It may be
Setting variable MTRR 0, base: 3840MB, range:  256MB, type WC
Setting variable MTRR 1, base: 4096MB, range: 4096MB, type WB
Setting variable MTRR 2, base: 8192MB, range: 4096MB, type WB
Setting variable MTRR 3, base: 4096MB, range: 4096MB, type WB

Regards

Yinghai Lu

-----邮件原件-----
发件人: YhLu 
发送时间: 2003年7月31日 21:08
收件人: ebiederman at lnxi.com
抄送: ron minnich; Stefan Reinauer; linuxbios at clustermatic.org
主题: re: Fixes for Tyan s2880

Eric,

It works. For 6G.  Tommorrow I will try 12G.

Thanks.

Yinghai Lu