ADLO no go

[Adam Sulmicki]

what motherboard?
what chipset?
did you set registers that control shadow ram right? (at loader.s)


On Wed, 30 Apr 2003, Richard Smith wrote:

> I'm trying to get ADLO up but once it jumps to adlo nothing happens.
>
> I've applied the serial-debug patch to ADLO but still no results.
>
> Are there any specific memory region options that I need to have enabled
> /disabled?
>
> Heres the snipit from my serial output.
>
> Welcome to elfboot, the open sourced starter.
> January 2002, Eric Biederman.
> Version 1.2
>
> Using stream address 0x9c00
>      37:init_bytes() - zkernel_start:0xfff00000  zkernel_mask:0x0000ffff
> Found ELF candiate at offset 0
> New segment addr 0x7c00 size 0x20400 offset 0x100 filesize 0x20400
> (cleaned up) New segment addr 0x7c00 size 0x20400 offset 0x100 filesize
> 0x20400
> Loading Segment: addr: 0x0000000007f67368 memsz: 0x0000000000020400
> filesz: 0x0000000000020400
> Jumping to boot code at 0x7c00
>
>
> <machine is toast at this point>
>
>


-- 
Adam Sulmicki
http://www.eax.com 	The Supreme Headquarters of the 32 bit registers