Using ADLO with Linuxbios
dkotian3 at vsnl.net
Mon Apr 28 13:58:01 CEST 2003
Can someone please stick out the config file content over here for the
1. When LinuxBIOS in flash ROM and image is on compact flash without hdc1.
2. Any sample config file which uses ADLO payload with LinuxBIOS on
----- Original Message -----
From: "Steve Gehlbach" <steve at nexpath.com>
To: "Shubhangi Jadhav" <shubhangi.jadhav at patni.com>
Cc: "ron minnich" <rminnich at lanl.gov>; "Eric W. Biederman"
<ebiederman at lnxi.com>; "Deepak Kotian" <dkotian3 at vsnl.net>; "Adam Agnew"
<agnew at cs.umd.edu>; "bendany" <bendany at mistdl.com>;
<Linuxbios at clustermatic.org>
Sent: Monday, April 28, 2003 9:12 PM
Subject: Re: Using ADLO with Linuxbios
> Shubhangi Jadhav wrote:
> > I give the following options in my config file
> > option BOOT_IDE=1
> > option IDE_BOOT_DRIVE=2
> > option ONE_TRACK=32
> > commandline root=/dev/hda2 console=ttyS0,115200 console=tty0
> > option USE_ELF_BOOT=1
> > Is this correct if I want Linuxbios to directly boot the elfimage?
> > However when I try to build linuxbios using these options I get an
> > file linux.bin not found. Now why does it look for this file.
> > Do I need to specify some payload in the config file. what payload is
> I believe you will see this error if you do not set "linux
> /usr/src/linux" or where ever your linux kernel source tree is. Put
> this in, and I think this error will go away.
> But I should mention that I have never gotten this to boot with
> USE_ELF_BOOT=1, though I am told it should. It has only worked for me
> using vmlinux.gin.gz, ie, direct loading a non-elf image.
> Linuxbios mailing list
> Linuxbios at clustermatic.org
More information about the coreboot