Using ADLO with Linuxbios
Shubhangi Jadhav
shubhangi.jadhav at patni.com
Mon Apr 28 00:35:01 CEST 2003
I give the following options in my config file
option BOOT_IDE=1
option IDE_BOOT_DRIVE=2
option ONE_TRACK=32
commandline root=/dev/hda2 console=ttyS0,115200 console=tty0
option USE_ELF_BOOT=1
Is this correct if I want Linuxbios to directly boot the elfimage?
However when I try to build linuxbios using these options I get an error-
file linux.bin not found. Now why does it look for this file.
Do I need to specify some payload in the config file. what payload is it?
Regards,
Shubhangi
-----Original Message-----
From: linuxbios-admin at clustermatic.org
[mailto:linuxbios-admin at clustermatic.org]On Behalf Of ron minnich
Sent: Sunday, April 27, 2003 8:26 AM
To: Shubhangi Jadhav
Cc: Eric W. Biederman; Steve Gehlbach; Deepak Kotian; Adam Agnew;
bendany; Linuxbios at clustermatic.org
Subject: RE: Using ADLO with Linuxbios
On Sat, 26 Apr 2003, Shubhangi Jadhav wrote:
> cat elfimage > /dev/hda1
I made a mistake. Sorry. This is what I had to do.
dd if=elfImage of=/dev/hda bs=4096 seek=1
This leaves partition tables, mbr, etc. intact.
ron
_______________________________________________
Linuxbios mailing list
Linuxbios at clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios
More information about the coreboot
mailing list