Debugging the linuxBIOS code

[siva]

Hi,

You should get LinuxBIOS banner message even if your northbridge
initialization is not correct.
I think there is some problem in your serial port setting. Check it out.

-Siva

----- Original Message -----
From: <dkotian3 at vsnl.net>
To: <linuxbios at clustermatic.org>
Sent: Wednesday, April 23, 2003 9:44 AM
Subject: Debugging the linuxBIOS code


> Hi,
>
>     Is there a recommended way of debugging LinuxBIOS code.
>
>     I burnt my FLASHROM with LinuxBIOS, nothing came
>     up at all. Not a single message came at the serial Output.
>     I knew that my North bridge code has issues, but still
>     something should have come. I guess..
>
>     I had connected the serial out of my PC to another PC
>     and I am using an Windows HyperTerminal to view
>     the messages.
>     Should it not show something at all even if north bridge code
>     is broken.
>
>     Could anyone give their views on this one..
>
> Regards
> Deepak
>
> _______________________________________________
> Linuxbios mailing list
> Linuxbios at clustermatic.org
> http://www.clustermatic.org/mailman/listinfo/linuxbios


**************************Disclaimer************************************

Information contained in this E-MAIL being proprietary to Wipro Limited is 
'privileged' and 'confidential' and intended for use only by the individual
 or entity to which it is addressed. You are notified that any use, copying 
or dissemination of the information contained in the E-MAIL in any manner 
whatsoever is strictly prohibited.

***************************************************************************