About 82810e north bridge
Deepak Kotian
dkotian3 at vsnl.net
Mon Apr 21 23:48:13 CEST 2003
OK,
One more question, would the messages come up on the console if I
do not the initialize Graphical Controller HUB.
There is an option in the LinuxBIOS for VGA_CONSOLE or SERIAL_CONSOLE
to display messages on the screen.
Would VGA_CONSOLE be OK without the above initialization.
Could one please elaborate on this.
Regards
Deepak
----- Original Message -----
From: "ron minnich" <rminnich at lanl.gov>
To: "Deepak Kotian" <dkotian3 at vsnl.net>
Cc: <linuxbios at clustermatic.org>
Sent: Tuesday, April 22, 2003 2:58 AM
Subject: Re: About 82810e north bridge
> On Tue, 22 Apr 2003, Deepak Kotian wrote:
>
> > There seems to be two devices in Intel 82810e north bridge, one is
> > Memory controller
> > Hub and other is Graphical controller HUB.
> > Is it OK to just do the initialization for Memory controller HUB
> > and forget about Graphical controller HUB.
>
> I think so.
>
> >
> > Also, I saw 82815ep on linuxbios tree, which has support for
> > MCH only and no AGP. This is very much similar to 82810e with
> > some address changed.
>
> I don't think this hardware is at all well tested, so if you can fix it,
> we would be grateful.
>
> ron
>
> _______________________________________________
> Linuxbios mailing list
> Linuxbios at clustermatic.org
> http://www.clustermatic.org/mailman/listinfo/linuxbios
>
More information about the coreboot
mailing list