more on the 82802 & e7500 chipset

[steven james]

Greetings,

A good workaround for the setpci bug is to use -d to select by device ID 
I believe the device is 8086:2480

G'day,
sjames



On Thu, 5 Sep 2002, Ronald G Minnich wrote:

> 
> OK, if I do the equivalent of:
> setpci -s 0:1f.0 4e.b=1
> 
> Then writes are enabled. Note you can't really do this due to a bug in the
> pcitools == have to do it by program.
> 
> Then, if I run flash_rom, jedec_probe will get an ID of the 82802AB of
> 
> vendor 89, device code AD (4 mbit part)
> 
> So flash_rom I think might be able to flash this part!
> 
> I have added an entry into flash_rom and will test this tomorrow.
> 
> ron
> 
> 
> 
> _______________________________________________
> Linuxbios mailing list
> Linuxbios at clustermatic.org
> http://www.clustermatic.org/mailman/listinfo/linuxbios
> 

-- 
-------------------------steven james, director of research, linux labs
... ........ ..... ....                     230 peachtree st nw ste 701
the original linux labs                             atlanta.ga.us 30303
      -since 1995                              http://www.linuxlabs.com
                                   office 404.577.7747 fax 404.577.7743
-----------------------------------------------------------------------