PCChips M758LMR+ works for me but...
Todd E. Johnson
tejohnson at yahoo.com
Thu Oct 3 19:59:00 CEST 2002
Hi again all,
I am able to boot and get X up. It takes about 45 seconds, which is not
bad, but it is a bit more than I was expecting. sshd takes up a bit of
this time though. I have most everything else disabled.
One of the largest problems is that none of the onboard USB ports work.
Also, none of the PCI cards I am using appears to work as well (Which
all of the devices work fine with the factory bios). Finally, I
unfortunately rely heavily on ACPI to startup and shutdown the system.
I have included a bit of output with this message, such as my config
file, output from `lspci -vvv`, and the output from `dmesg`. Perhaps I
did something wrong, or I'm setting my expectations a bit too high. I
appreciate anyone's time and effort that the may put into this, and I
thinking this pretty much rocks! (This would explain why I bought
another motherboard and a few extra DOCs...)
Any and all ideas are appreciated!
Regards,
Todd E. Johnson
tejohnson at yahoo.com
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: dmesg.txt
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20021003/7cac79fe/attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: lspci_vvv.txt
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20021003/7cac79fe/attachment-0001.txt>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: m758lmr+.config
Type: application/octet-stream
Size: 1484 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20021003/7cac79fe/attachment.obj>
More information about the coreboot
mailing list