ide problem with pcm-5823
Andrew Ip
aip at cwlinux.com
Mon Nov 11 10:53:00 CET 2002
Does any see the following errors? hdc is unusable.
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CS5530: IDE controller on PCI bus 00 dev 92
CS5530: chipset revision 0
CS5530: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:pio, hdd:pio
hda: C/H/S=0/0/0 from BIOS ignored hda: LEAD DATA, ATA DISK drive hda: cs5530_set_xfer_mode(PIO 1) hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hda: set_drive_speed_status: error=0x04 { DriveStatusError } hdc: SanDisk SDCFB-16, ATA DISK drive hdc: IRQ probe failed (0xfef8) hdc: cs5530_set_xfer_mode(PIO 0) hdc: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hdc: set_drive_speed_status: error=0x04 { DriveStatusError } ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 (serialized with ide0) hda: 64000 sectors (33 MB) w/0KiB Cache, CHS=1000/16/4 hdc: 31360 sectors (16 MB) w/1KiB Cache, CHS=490/2/32
Partition check:
hda: hda1
hdc:hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
[PTBL] [15/32/63] hdc1
-Andrew
--
Andrew Ip
Email: aip at cwlinux.com
Tel: (852) 2542 2046
Fax: (852) 2542 2036
Mobile: (852) 9201 9866
Cwlinux Limited
Unit 202B 2/F Lai Cheong Factory Building,
479-479A Castle Peak Road,
Lai Chi Kok, Kowloon,
Hong Kong.
Tel: (852)2542 2046
Fax: (852)2542 2036
For public pgp key, please obtain it from http://www.keyserver.net/en.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 232 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20021111/452be92c/attachment.sig>
More information about the coreboot
mailing list