e7500 flash

[Andrew Ip]

James,

> Which board are you using? The setpci enebles writes in the chipset, but
> the 82801ca has erase/write protect pins as well that are usually wired to
> a GPIO line from the superio or to a jumper.
I think it is a oem board, so I don't know where it is from.  I did make sure 
the bios write jump is set, and setpci -d 8086:2480 4e.b=1.  BTW, this board is
using SST 49LF004 as bios flash.  If I can backup the original bios, I can also
try the 49LF004.

-Andrew

-- 
Andrew Ip
Email:  aip at cwlinux.com
Tel:    (852) 2542 2046
Fax:    (852) 2542 2036
Mobile: (852) 9201 9866

Cwlinux Limited
Unit 202B 2/F Lai Cheong Factory Building,
479-479A Castle Peak Road,
Lai Chi Kok, Kowloon,
Hong Kong.

Tel: (852)2542 2046
Fax: (852)2542 2036

For public pgp key, please obtain it from http://www.keyserver.net/en.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 232 bytes
Desc: not available
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20021102/2d7dfb8b/attachment.sig>