[coreboot-gerrit] Change in coreboot[master]: mainboard: use SeaBIOS config only when it's the payload of choice

[Lubomir Rintel (Code Review)]

Lubomir Rintel has uploaded this change for review. ( https://review.coreboot.org/21611


Change subject: mainboard: use SeaBIOS config only when it's the payload of choice
......................................................................

mainboard: use SeaBIOS config only when it's the payload of choice

It makes no sense for Das U-Boot which uses the same setting.

Change-Id: I1629aecf33cb62bb1e6856ef5627748a7dc74d8a
Signed-off-by: Lubomir Rintel <lkundrak at v3.sk>
---
M src/mainboard/adi/rcc-dff/Kconfig
M src/mainboard/intel/littleplains/Kconfig
M src/mainboard/intel/mohonpeak/Kconfig
3 files changed, 12 insertions(+), 0 deletions(-)



  git pull ssh://review.coreboot.org:29418/coreboot refs/changes/11/21611/1

diff --git a/src/mainboard/adi/rcc-dff/Kconfig b/src/mainboard/adi/rcc-dff/Kconfig
index 3c22a74..ab0e113 100644
--- a/src/mainboard/adi/rcc-dff/Kconfig
+++ b/src/mainboard/adi/rcc-dff/Kconfig
@@ -69,6 +69,8 @@
 	help
 	  The Mohon Peak board uses COM2 (2f8) for the serial console.
 
+if PAYLOAD_SEABIOS
+
 config PAYLOAD_CONFIGFILE
 	string
 	default "$(top)/src/mainboard/$(MAINBOARDDIR)/config_seabios"
@@ -77,4 +79,6 @@
 	  segment.  This means that USB/SATA devices will not work in SeaBIOS unless
 	  we put the SeaBIOS buffer area down in the 0x9000 segment.
 
+endif # PAYLOAD_SEABIOS
+
 endif # BOARD_ADI_RCC_DFF
diff --git a/src/mainboard/intel/littleplains/Kconfig b/src/mainboard/intel/littleplains/Kconfig
index 10cde71..8c4050e 100644
--- a/src/mainboard/intel/littleplains/Kconfig
+++ b/src/mainboard/intel/littleplains/Kconfig
@@ -56,6 +56,8 @@
 	help
 	  The Little Plains board uses COM2 (2f8) for the serial console.
 
+if PAYLOAD_SEABIOS
+
 config PAYLOAD_CONFIGFILE
 	string
 	default "$(top)/src/mainboard/$(MAINBOARDDIR)/config_seabios"
@@ -64,4 +66,6 @@
 	  segment.  This means that USB/SATA devices will not work in SeaBIOS unless
 	  we put the SeaBIOS buffer area down in the 0x9000 segment.
 
+endif # PAYLOAD_SEABIOS
+
 endif # BOARD_INTEL_LITTLEPLAINS
diff --git a/src/mainboard/intel/mohonpeak/Kconfig b/src/mainboard/intel/mohonpeak/Kconfig
index c354d1b..37a9878 100644
--- a/src/mainboard/intel/mohonpeak/Kconfig
+++ b/src/mainboard/intel/mohonpeak/Kconfig
@@ -69,6 +69,8 @@
 	help
 	  The Mohon Peak board uses COM2 (2f8) for the serial console.
 
+if PAYLOAD_SEABIOS
+
 config PAYLOAD_CONFIGFILE
 	string
 	default "$(top)/src/mainboard/$(MAINBOARDDIR)/config_seabios"
@@ -77,4 +79,6 @@
 	  segment.  This means that USB/SATA devices will not work in SeaBIOS unless
 	  we put the SeaBIOS buffer area down in the 0x9000 segment.
 
+endif # PAYLOAD_SEABIOS
+
 endif # BOARD_INTEL_MOHONPEAK

-- 
To view, visit https://review.coreboot.org/21611
To unsubscribe, visit https://review.coreboot.org/settings

Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I1629aecf33cb62bb1e6856ef5627748a7dc74d8a
Gerrit-Change-Number: 21611
Gerrit-PatchSet: 1
Gerrit-Owner: Lubomir Rintel <lkundrak at v3.sk>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot-gerrit/attachments/20170920/cb5b689b/attachment-0001.html>