[coreboot-gerrit] Change in coreboot[master]: rx6110sa: Add possibility to use both I2C and SMBus for the RTC

[Werner Zeh (Code Review)]

Hello build bot (Jenkins),

I'd like you to reexamine a change.  Please visit

    https://review.coreboot.org/19978

to look at the new patch set (#3).

Change subject: rx6110sa: Add possibility to use both I2C and SMBus for the RTC
......................................................................

rx6110sa: Add possibility to use both I2C and SMBus for the RTC

The driver for the RTC RX6110SA is designed to be used with I2C bus.
This patch adds the possibility to use SMBus operations to access the
RTC. For this purpose the Kconfig switch RX6110SA_USE_SMBUS is added. It
is not enabled per default so that I2C will be used. One can set this
switch on board level to use SMBus instead.

Change-Id: I4827ae2c544e8002399d94a1159acacd8176c5e9
Signed-off-by: Werner Zeh <werner.zeh at siemens.com>
---
M src/drivers/i2c/rx6110sa/Kconfig
M src/drivers/i2c/rx6110sa/rx6110sa.c
2 files changed, 60 insertions(+), 37 deletions(-)


  git pull ssh://review.coreboot.org:29418/coreboot refs/changes/78/19978/3
-- 
To view, visit https://review.coreboot.org/19978
To unsubscribe, visit https://review.coreboot.org/settings

Gerrit-MessageType: newpatchset
Gerrit-Change-Id: I4827ae2c544e8002399d94a1159acacd8176c5e9
Gerrit-PatchSet: 3
Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-Owner: Werner Zeh <werner.zeh at siemens.com>
Gerrit-Reviewer: Aaron Durbin <adurbin at gmail.com>
Gerrit-Reviewer: Mario Scheithauer <mario.scheithauer at siemens.com>
Gerrit-Reviewer: Werner Zeh <werner.zeh at siemens.com>
Gerrit-Reviewer: build bot (Jenkins) <no-reply at coreboot.org>