[coreboot-gerrit] Change in coreboot[master]: siemens/mc_apl1: Select external 8250 UART

[Mario Scheithauer (Code Review)]

Mario Scheithauer has posted comments on this change. ( https://review.coreboot.org/19694 )

Change subject: siemens/mc_apl1: Select external 8250 UART
......................................................................


Patch Set 1:

(1 comment)

https://review.coreboot.org/#/c/19694/1//COMMIT_MSG
Commit Message:

Line 10: output. For this reason we need to activate the 8250 LPC UART.
> So until now, there no console logs could be read, right?
No, for our first mainboards we have both options for console logs. Initialy, we used the MMIO UART, just as on the APL CRBs. But finally our mainboard should use the console output over LPC.


-- 
To view, visit https://review.coreboot.org/19694
To unsubscribe, visit https://review.coreboot.org/settings

Gerrit-MessageType: comment
Gerrit-Change-Id: Ib5616a116aec6135191bdce95f9f9566ce13d6f1
Gerrit-PatchSet: 1
Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-Owner: Mario Scheithauer <mario.scheithauer at siemens.com>
Gerrit-Reviewer: Aaron Durbin <adurbin at chromium.org>
Gerrit-Reviewer: Mario Scheithauer <mario.scheithauer at siemens.com>
Gerrit-Reviewer: Paul Menzel <paulepanter at users.sourceforge.net>
Gerrit-Reviewer: Werner Zeh <werner.zeh at siemens.com>
Gerrit-Reviewer: build bot (Jenkins) <no-reply at coreboot.org>
Gerrit-HasComments: Yes