[coreboot-gerrit] Change in coreboot[master]: siemens/mc_apl1: Use Siemens NC FPGA driver

[Mario Scheithauer (Code Review)]

Mario Scheithauer has uploaded this change for review. ( https://review.coreboot.org/20161


Change subject: siemens/mc_apl1: Use Siemens NC FPGA driver
......................................................................

siemens/mc_apl1: Use Siemens NC FPGA driver

- use Siemens NC FPGA driver for backlight brightness and PWM control
- set Dsave time for board reset after falling edge of signal xdsave

Change-Id: I5077d4af162e54a3993e5e0d784a8356f51bd0c9
Signed-off-by: Mario Scheithauer <mario.scheithauer at siemens.com>
---
M src/mainboard/siemens/mc_apl1/Kconfig
1 file changed, 1 insertion(+), 0 deletions(-)



  git pull ssh://review.coreboot.org:29418/coreboot refs/changes/61/20161/1

diff --git a/src/mainboard/siemens/mc_apl1/Kconfig b/src/mainboard/siemens/mc_apl1/Kconfig
index cafdd4c..4996883 100644
--- a/src/mainboard/siemens/mc_apl1/Kconfig
+++ b/src/mainboard/siemens/mc_apl1/Kconfig
@@ -7,6 +7,7 @@
 	select HAVE_ACPI_TABLES
 	select DRIVER_INTEL_I210
 	select USE_SIEMENS_HWILIB
+	select DRIVER_SIEMENS_NC_FPGA
 	select DRIVERS_I2C_RX6110SA
 	select DRIVERS_UART_8250IO
 

-- 
To view, visit https://review.coreboot.org/20161
To unsubscribe, visit https://review.coreboot.org/settings

Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I5077d4af162e54a3993e5e0d784a8356f51bd0c9
Gerrit-Change-Number: 20161
Gerrit-PatchSet: 1
Gerrit-Owner: Mario Scheithauer <mario.scheithauer at siemens.com>