[coreboot-gerrit] Patch merged into coreboot/master: Add Baytrail ChromeOS devices using variant scheme

gerrit at coreboot.org gerrit at coreboot.org
Wed Feb 1 21:14:15 CET 2017


the following patch was just integrated into master:
commit 9be3f5dab46dd6997dc98203022b60241cf3d1c8
Author: Matt DeVillier <matt.devillier at gmail.com>
Date:   Mon Jan 16 17:32:38 2017 -0600

    Add Baytrail ChromeOS devices using variant scheme
    
    Add new ChromeOS devices banjo, candy, clapper, glimmer, gnawty,
    heli, kip, orco, quawks, squawks, sumo, swanky, and winky using
    their common reference board (rambi) as a base.
    
    Chromium sources used:
    firmware-banjo-5216.334.B 32ec493 [chromeos: vboot_loader: Set...]
    firmware-candy-5216.310.B 519ff11 [baytrail: Preserve VbNv around...]
    firmware-clapper-5216.199.B 80d55e3 [baytrail: add code for...]
    firmware-glimmer-5216.198.B fae0770 [baytrail: add code for...]
    firmware-gnawty-5216.239.B 952adb7 [Gnawty/Olay: Add 2nd source...]
    firmware-heli-5216.392.B f1f3604 [helis: Lock ME / TXE section...]
    firmware-kip-5216.227.B db3c5d9 [kip: update spd for for MT41K256M16*]
    firmware-orco-5216.362.B 76f1651 [Orco: Adjust rx delay for norm.]
    firmware-quawks-5216.204.B edb60c9 [Quawks: Update SPD data]
    firmware-squawks-5216.152.B c6573dc [Squawks: Update SPD data]
    firmware-sumo-5216.382.B c62b6f23 [Ninja, Sumo: Add SPD source...]
    firmware-swanky-5216.238.B 233b2a7 [Swanky: update SPD table]
    firmware-winky-5216.265.B ce91ffc [Add to support HT Micron...]
    
    The same basic cleanup/changes are made here as with the initial BYT
    variant commit:
     - remove unused ACPI trackpad/touchscreen devices
     - correct I2C addresses in SMBIOS entries
     - clean up comment formatting
     - remove ACPI device for unused light sensor
     - switch I2C ACPI devices from edge to level triggered interrupts,
       for better compatibility/functionality (and to be consistent
       with other recently-upstreamed ChromeOS devices)
     - Micron 2GB SPD file for kip with updated values renamed to distinguish
       from same file used by other boards
    
    Change-Id: Ic66f9b539afb5aff32c4c1a8563f6612f5a2927c
    Signed-off-by: Matt DeVillier <matt.devillier at gmail.com>
    Reviewed-on: https://review.coreboot.org/18164
    Tested-by: build bot (Jenkins)
    Reviewed-by: Martin Roth <martinroth at google.com>


See https://review.coreboot.org/18164 for details.

-gerrit



More information about the coreboot-gerrit mailing list