[coreboot-gerrit] Change in coreboot[master]: mainboard/hp: Add Eliteboot Revolve 810 G1

Bill XIE (Code Review) gerrit at coreboot.org
Fri Dec 22 06:38:55 CET 2017


Bill XIE has uploaded this change for review. ( https://review.coreboot.org/22972


Change subject: mainboard/hp: Add Eliteboot Revolve 810 G1
......................................................................

mainboard/hp: Add Eliteboot Revolve 810 G1

The code is based on autoport and that for 8470p.

Tested:
- CPU i5-3437U
- Slotted DIMM 8GiB
- Soldered RAM 4GiB from Hynix (There may be more models here)
- Onboard USB2 interfaces (digitizer, wlan slot, wwan slot, camera)
- Mini pci-e on wlan slot
- USB3 ports
- S3

Change-Id: Iba9c361591697e6a2b3b7b485f7f1649c2a83524
Signed-off-by: Bill XIE <persmule at gmail.com>
---
A src/mainboard/hp/revolve_810_g1/Kconfig
A src/mainboard/hp/revolve_810_g1/Kconfig.name
A src/mainboard/hp/revolve_810_g1/Makefile.inc
A src/mainboard/hp/revolve_810_g1/acpi/ec.asl
A src/mainboard/hp/revolve_810_g1/acpi/platform.asl
A src/mainboard/hp/revolve_810_g1/acpi/superio.asl
A src/mainboard/hp/revolve_810_g1/acpi_tables.c
A src/mainboard/hp/revolve_810_g1/board_info.txt
A src/mainboard/hp/revolve_810_g1/cmos.default
A src/mainboard/hp/revolve_810_g1/cmos.layout
A src/mainboard/hp/revolve_810_g1/devicetree.cb
A src/mainboard/hp/revolve_810_g1/dsdt.asl
A src/mainboard/hp/revolve_810_g1/gpio.c
A src/mainboard/hp/revolve_810_g1/hda_verb.c
A src/mainboard/hp/revolve_810_g1/mainboard.c
A src/mainboard/hp/revolve_810_g1/romstage.c
A src/mainboard/hp/revolve_810_g1/spd/hynix_4g.spd.hex
17 files changed, 970 insertions(+), 0 deletions(-)



  git pull ssh://review.coreboot.org:29418/coreboot refs/changes/72/22972/1

diff --git a/src/mainboard/hp/revolve_810_g1/Kconfig b/src/mainboard/hp/revolve_810_g1/Kconfig
new file mode 100644
index 0000000..1d79ce4
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/Kconfig
@@ -0,0 +1,68 @@
+if BOARD_HP_REVOLVE_810_G1
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select BOARD_ROMSIZE_KB_16384
+	select CPU_INTEL_SOCKET_RPGA989
+	select EC_HP_KBC1126
+	select HAVE_ACPI_RESUME
+	select HAVE_ACPI_TABLES
+	select INTEL_INT15
+	select NORTHBRIDGE_INTEL_IVYBRIDGE
+	select SANDYBRIDGE_IVYBRIDGE_LVDS
+	select SERIRQ_CONTINUOUS_MODE
+	select SOUTHBRIDGE_INTEL_C216
+	select SYSTEM_TYPE_LAPTOP
+	select USE_NATIVE_RAMINIT
+	select MAINBOARD_HAS_LPC_TPM
+	select GENERIC_SPD_BIN
+	select HAVE_OPTION_TABLE
+	select HAVE_CMOS_DEFAULT
+	select ENABLE_VMX
+	select MAINBOARD_HAS_LIBGFXINIT
+	select GFX_GMA_INTERNAL_IS_LVDS
+
+config HAVE_IFD_BIN
+	bool
+	default n
+
+config HAVE_ME_BIN
+	bool
+	default n
+
+config MAINBOARD_DIR
+	string
+	default hp/revolve_810_g1
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "EliteBook Revolve 810 G1"
+
+config VGA_BIOS_FILE
+	string
+	default "pci8086,0166.rom"
+
+config VGA_BIOS_ID
+	string
+	default "8086,0166"
+
+config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+	hex
+	default 0x18f8
+
+config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+	hex
+	default 0x103c
+
+config DRAM_RESET_GATE_GPIO # FIXME: check this
+	int
+	default 60
+
+config MAX_CPUS
+	int
+	default 8
+
+config USBDEBUG_HCD_INDEX # FIXME: check this
+	int
+	default 2
+endif
diff --git a/src/mainboard/hp/revolve_810_g1/Kconfig.name b/src/mainboard/hp/revolve_810_g1/Kconfig.name
new file mode 100644
index 0000000..9a0c1ff
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/Kconfig.name
@@ -0,0 +1,2 @@
+config BOARD_HP_REVOLVE_810_G1
+	bool "EliteBook Revolve 810 G1"
diff --git a/src/mainboard/hp/revolve_810_g1/Makefile.inc b/src/mainboard/hp/revolve_810_g1/Makefile.inc
new file mode 100644
index 0000000..7a211f4
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/Makefile.inc
@@ -0,0 +1,21 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2011 The ChromiumOS Authors.  All rights reserved.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+
+romstage-y += gpio.c
+
+ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
+
+# FIXME: Other varients with same size onboard ram may exist.
+SPD_SOURCES = hynix_4g
diff --git a/src/mainboard/hp/revolve_810_g1/acpi/ec.asl b/src/mainboard/hp/revolve_810_g1/acpi/ec.asl
new file mode 100644
index 0000000..ac65fb3
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/acpi/ec.asl
@@ -0,0 +1,16 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Iru Cai <mytbk920423 at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <ec/hp/kbc1126/acpi/ec.asl>
diff --git a/src/mainboard/hp/revolve_810_g1/acpi/platform.asl b/src/mainboard/hp/revolve_810_g1/acpi/platform.asl
new file mode 100644
index 0000000..fe0f936
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/acpi/platform.asl
@@ -0,0 +1,27 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+Method(_WAK,1)
+{
+	\_SB.PCI0.LPCB.EC0.ACPI = 1
+	\_SB.PCI0.LPCB.EC0.SLPT = 0
+
+	Return(Package(){0,0})
+}
+
+Method(_PTS,1)
+{
+	\_SB.PCI0.LPCB.EC0.SLPT = Arg0
+}
diff --git a/src/mainboard/hp/revolve_810_g1/acpi/superio.asl b/src/mainboard/hp/revolve_810_g1/acpi/superio.asl
new file mode 100644
index 0000000..f2b35ba
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/acpi/superio.asl
@@ -0,0 +1 @@
+#include <drivers/pc80/pc/ps2_controller.asl>
diff --git a/src/mainboard/hp/revolve_810_g1/acpi_tables.c b/src/mainboard/hp/revolve_810_g1/acpi_tables.c
new file mode 100644
index 0000000..6b731cc
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/acpi_tables.c
@@ -0,0 +1,36 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2014 Vladimir Serbinenko
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <southbridge/intel/bd82x6x/nvs.h>
+
+/* FIXME: check this function.  */
+void acpi_create_gnvs(global_nvs_t *gnvs)
+{
+	/* Disable USB ports in S3 by default */
+	gnvs->s3u0 = 0;
+	gnvs->s3u1 = 0;
+
+	/* Disable USB ports in S5 by default */
+	gnvs->s5u0 = 0;
+	gnvs->s5u1 = 0;
+
+	// the lid is open by default.
+	gnvs->lids = 1;
+
+	gnvs->tcrt = 100;
+	gnvs->tpsv = 90;
+}
diff --git a/src/mainboard/hp/revolve_810_g1/board_info.txt b/src/mainboard/hp/revolve_810_g1/board_info.txt
new file mode 100644
index 0000000..5f22183
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/board_info.txt
@@ -0,0 +1,7 @@
+Category: laptop
+Board URL: https://support.hp.com/us-en/product/hp-elitebook-revolve-810-g1-tablet/5298038/product-info
+ROM package: SOIC-8
+ROM protocol: SPI
+ROM socketed: n
+Flashrom support: n
+Release year: 2013
diff --git a/src/mainboard/hp/revolve_810_g1/cmos.default b/src/mainboard/hp/revolve_810_g1/cmos.default
new file mode 100644
index 0000000..7d4bb7b
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/cmos.default
@@ -0,0 +1,6 @@
+boot_option=Fallback
+debug_level=Spew
+power_on_after_fail=Disable
+nmi=Enable
+volume=0x3
+gfx_uma_size=32M
diff --git a/src/mainboard/hp/revolve_810_g1/cmos.layout b/src/mainboard/hp/revolve_810_g1/cmos.layout
new file mode 100644
index 0000000..cc1fc55
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/cmos.layout
@@ -0,0 +1,135 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007-2008 coresystems GmbH
+## Copyright (C) 2014 Vladimir Serbinenko
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+
+# -----------------------------------------------------------------
+entries
+
+# -----------------------------------------------------------------
+# Status Register A
+# -----------------------------------------------------------------
+# Status Register B
+# -----------------------------------------------------------------
+# Status Register C
+#96           4       r       0        status_c_rsvd
+#100          1       r       0        uf_flag
+#101          1       r       0        af_flag
+#102          1       r       0        pf_flag
+#103          1       r       0        irqf_flag
+# -----------------------------------------------------------------
+# Status Register D
+#104          7       r       0        status_d_rsvd
+#111          1       r       0        valid_cmos_ram
+# -----------------------------------------------------------------
+# Diagnostic Status Register
+#112          8       r       0        diag_rsvd1
+
+# -----------------------------------------------------------------
+0            120     r       0        reserved_memory
+#120          264     r       0        unused
+
+# -----------------------------------------------------------------
+# RTC_BOOT_BYTE (coreboot hardcoded)
+384          1       e       4        boot_option
+388          4       h       0        reboot_counter
+#390          2       r       0        unused?
+
+# -----------------------------------------------------------------
+# coreboot config options: console
+#392          3       r       0        unused
+395          4       e       6        debug_level
+#399          1       r       0        unused
+
+#400         8       r       0        reserved for century byte
+
+# coreboot config options: southbridge
+408          1       e       1        nmi
+409          2       e       7        power_on_after_fail
+
+# coreboot config options: EC
+#411          1       e       8        first_battery
+#412          1       e       1        bluetooth
+#413          1       e       1        wwan
+#414          1       e       1        touchpad
+#415          1       e       1        wlan
+#416          1       e       1        trackpoint
+#417          1       e       1        fn_ctrl_swap
+#418          1       e       1        sticky_fn
+#419          2       e       12       usb_always_on
+#421          1       e       9        sata_mode
+#422          2       e       10       backlight
+
+# coreboot config options: cpu
+#424          8       r       0        unused
+
+# coreboot config options: northbridge
+432          3       e       11       gfx_uma_size
+#435         5       r       0        unused
+440          8       h       0        volume
+
+# SandyBridge MRC Scrambler Seed values
+896          32      r       0        mrc_scrambler_seed
+928          32      r       0        mrc_scrambler_seed_s3
+960          16      r       0        mrc_scrambler_seed_chk
+
+# coreboot config options: check sums
+984          16      h       0        check_sum
+
+# -----------------------------------------------------------------
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+6     1     Emergency
+6     2     Alert
+6     3     Critical
+6     4     Error
+6     5     Warning
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+7     0     Disable
+7     1     Enable
+7     2     Keep
+8     0     Secondary
+8     1     Primary
+9     0     AHCI
+9     1     Compatible
+10    0     Both
+10    1     Keyboard only
+10    2     Thinklight only
+10    3     None
+11    0     32M
+11    1     64M
+11    2     96M
+11    3     128M
+11    4     160M
+11    5     192M
+11    6     224M
+12    0     Disable
+12    1     AC and battery
+12    2     AC only
+
+# -----------------------------------------------------------------
+checksums
+
+checksum 392 447 984
diff --git a/src/mainboard/hp/revolve_810_g1/devicetree.cb b/src/mainboard/hp/revolve_810_g1/devicetree.cb
new file mode 100644
index 0000000..eee0eaf
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/devicetree.cb
@@ -0,0 +1,143 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2017 Bill Xie <persmule at gmail.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+
+chip northbridge/intel/sandybridge # FIXME: check gfx.ndid and gfx.did
+	register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
+	register "gfx.link_frequency_270_mhz" = "1"
+	register "gfx.ndid" = "3"
+	register "gfx.use_spread_spectrum_clock" = "1"
+	register "gpu_cpu_backlight" = "0x00000263"
+	register "gpu_dp_b_hotplug" = "4"
+	register "gpu_dp_c_hotplug" = "4"
+	register "gpu_dp_d_hotplug" = "4"
+	register "gpu_panel_port_select" = "0"
+	register "gpu_panel_power_backlight_off_delay" = "2000"
+	register "gpu_panel_power_backlight_on_delay" = "2000"
+	register "gpu_panel_power_cycle_delay" = "5"
+	register "gpu_panel_power_down_delay" = "230"
+	register "gpu_panel_power_up_delay" = "300"
+	register "gpu_pch_backlight" = "0x02880288"
+	device cpu_cluster 0x0 on
+		chip cpu/intel/socket_rPGA989
+			device lapic 0x0 on
+			end
+		end
+		chip cpu/intel/model_206ax # FIXME: check all registers
+			register "c1_acpower" = "1"
+			register "c1_battery" = "1"
+			register "c2_acpower" = "3"
+			register "c2_battery" = "3"
+			register "c3_acpower" = "5"
+			register "c3_battery" = "5"
+			device lapic 0xacac off
+			end
+		end
+	end
+	device domain 0x0 on
+		chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
+			register "c2_latency" = "0x0065"
+			register "docking_supported" = "0"
+			register "gen1_dec" = "0x007c0201"
+			register "gen2_dec" = "0x000c0101"
+			register "gen3_dec" = "0x00fcfe01"
+			register "gen4_dec" = "0x000402e9"
+			register "gpi6_routing" = "2"
+			register "p_cnt_throttling_supported" = "1"
+			register "pcie_hotplug_map" = "{ 0, 0, 1, 0, 0, 0, 0, 0 }"
+			register "pcie_port_coalesce" = "1"
+			register "sata_interface_speed_support" = "0x3"
+			register "sata_port_map" = "0x1"
+			register "spi_lvscc" = "0x0"
+			register "spi_uvscc" = "0x2005"
+			register "superspeed_capable_ports" = "0x0000000f"
+			register "xhci_overcurrent_mapping" = "0x00000c03"
+			register "xhci_switchable_ports" = "0x0000000f"
+			device pci 14.0 on # USB 3.0 Controller
+				subsystemid 0x103c 0x18f8
+			end
+			device pci 16.0 off # Management Engine Interface 1
+				subsystemid 0x103c 0x18f8
+			end
+			device pci 16.1 off # Management Engine Interface 2
+			end
+			device pci 16.2 off # Management Engine IDE-R
+			end
+			device pci 16.3 off # Management Engine KT
+				subsystemid 0x103c 0x18f8
+			end
+			device pci 19.0 on # Intel Gigabit Ethernet
+				subsystemid 0x8086 0x18f8
+			end
+			device pci 1a.0 on # USB2 EHCI #2
+				subsystemid 0x103c 0x18f8
+			end
+			device pci 1b.0 on # High Definition Audio Audio controller
+				subsystemid 0x103c 0x18f8
+			end
+			device pci 1c.0 on # PCIe Port #1
+				subsystemid 0x103c 0x18f8
+			end
+			device pci 1c.1 off # PCIe Port #2
+			end
+			device pci 1c.2 on # PCIe Port #3
+				subsystemid 0x103c 0x18f8
+			end
+			device pci 1c.3 on # PCIe Port #4
+				subsystemid 0x103c 0x18f8
+			end
+			device pci 1c.4 off # PCIe Port #5
+			end
+			device pci 1c.5 off # PCIe Port #6
+			end
+			device pci 1c.6 off # PCIe Port #7
+			end
+			device pci 1c.7 off # PCIe Port #8
+			end
+			device pci 1d.0 on # USB2 EHCI #1
+				subsystemid 0x103c 0x18f8
+			end
+			device pci 1e.0 off # PCI bridge
+			end
+			device pci 1f.0 on # LPC bridge PCI-LPC bridge
+				subsystemid 0x103c 0x18f8
+				chip ec/hp/kbc1126
+					register "ec_data_port" = "0x62"
+					register "ec_cmd_port" = "0x66"
+					register "ec_ctrl_reg" = "0x81"
+					register "ec_fan_ctrl_value" = "0x70"
+					device pnp ff.1 off end
+				end # kbc1126
+			end
+			device pci 1f.2 on # SATA Controller 1
+				subsystemid 0x103c 0x18f8
+			end
+			device pci 1f.3 off # SMBus
+			end
+			device pci 1f.5 off # SATA Controller 2
+			end
+			device pci 1f.6 off # Thermal
+			end
+		end
+		device pci 00.0 on # Host bridge Host bridge
+			subsystemid 0x103c 0x18f8
+		end
+		device pci 01.0 off # PCIe Bridge for discrete graphics
+		end
+		device pci 02.0 on # Internal graphics VGA controller
+			subsystemid 0x103c 0x18f8
+		end
+	end
+end
diff --git a/src/mainboard/hp/revolve_810_g1/dsdt.asl b/src/mainboard/hp/revolve_810_g1/dsdt.asl
new file mode 100644
index 0000000..51934c7
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/dsdt.asl
@@ -0,0 +1,44 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define BRIGHTNESS_UP \_SB.PCI0.GFX0.INCB
+#define BRIGHTNESS_DOWN \_SB.PCI0.GFX0.DECB
+#define ACPI_VIDEO_DEVICE \_SB.PCI0.GFX0
+DefinitionBlock(
+	"dsdt.aml",
+	"DSDT",
+	0x03,		// DSDT revision: ACPI v3.0
+	"COREv4",	// OEM id
+	"COREBOOT",	// OEM table id
+	0x20141018	// OEM revision
+)
+{
+	// Some generic macros
+	#include "acpi/platform.asl"
+	#include <cpu/intel/model_206ax/acpi/cpu.asl>
+	#include <southbridge/intel/bd82x6x/acpi/platform.asl>
+	/* global NVS and variables.  */
+	#include <southbridge/intel/bd82x6x/acpi/globalnvs.asl>
+	#include <southbridge/intel/bd82x6x/acpi/sleepstates.asl>
+
+	Scope (\_SB) {
+		Device (PCI0)
+		{
+		#include <northbridge/intel/sandybridge/acpi/sandybridge.asl>
+		#include <drivers/intel/gma/acpi/default_brightness_levels.asl>
+		#include <southbridge/intel/bd82x6x/acpi/pch.asl>
+		}
+	}
+}
diff --git a/src/mainboard/hp/revolve_810_g1/gpio.c b/src/mainboard/hp/revolve_810_g1/gpio.c
new file mode 100644
index 0000000..5a9d875
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/gpio.c
@@ -0,0 +1,239 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2014 Vladimir Serbinenko
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <southbridge/intel/common/gpio.h>
+
+static const struct pch_gpio_set1 pch_gpio_set1_mode = {
+	.gpio0 = GPIO_MODE_GPIO,
+	.gpio1 = GPIO_MODE_GPIO,
+	.gpio2 = GPIO_MODE_GPIO,
+	.gpio3 = GPIO_MODE_GPIO,
+	.gpio4 = GPIO_MODE_GPIO,
+	.gpio5 = GPIO_MODE_GPIO,
+	.gpio6 = GPIO_MODE_GPIO,
+	.gpio7 = GPIO_MODE_GPIO,
+	.gpio8 = GPIO_MODE_GPIO,
+	.gpio9 = GPIO_MODE_NATIVE,
+	.gpio10 = GPIO_MODE_GPIO,
+	.gpio11 = GPIO_MODE_GPIO,
+	.gpio12 = GPIO_MODE_NATIVE,
+	.gpio13 = GPIO_MODE_GPIO,
+	.gpio14 = GPIO_MODE_GPIO,
+	.gpio15 = GPIO_MODE_GPIO,
+	.gpio16 = GPIO_MODE_GPIO,
+	.gpio17 = GPIO_MODE_GPIO,
+	.gpio18 = GPIO_MODE_GPIO,
+	.gpio19 = GPIO_MODE_NATIVE,
+	.gpio20 = GPIO_MODE_NATIVE,
+	.gpio21 = GPIO_MODE_GPIO,
+	.gpio22 = GPIO_MODE_GPIO,
+	.gpio23 = GPIO_MODE_GPIO,
+	.gpio24 = GPIO_MODE_GPIO,
+	.gpio25 = GPIO_MODE_NATIVE,
+	.gpio26 = GPIO_MODE_NATIVE,
+	.gpio27 = GPIO_MODE_GPIO,
+	.gpio28 = GPIO_MODE_GPIO,
+	.gpio29 = GPIO_MODE_GPIO,
+	.gpio30 = GPIO_MODE_NATIVE,
+	.gpio31 = GPIO_MODE_NATIVE,
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_direction = {
+	.gpio0 = GPIO_DIR_OUTPUT,
+	.gpio1 = GPIO_DIR_INPUT,
+	.gpio2 = GPIO_DIR_OUTPUT,
+	.gpio3 = GPIO_DIR_INPUT,
+	.gpio4 = GPIO_DIR_INPUT,
+	.gpio5 = GPIO_DIR_INPUT,
+	.gpio6 = GPIO_DIR_INPUT,
+	.gpio7 = GPIO_DIR_INPUT,
+	.gpio8 = GPIO_DIR_INPUT,
+	.gpio10 = GPIO_DIR_INPUT,
+	.gpio11 = GPIO_DIR_INPUT,
+	.gpio13 = GPIO_DIR_INPUT,
+	.gpio14 = GPIO_DIR_INPUT,
+	.gpio15 = GPIO_DIR_INPUT,
+	.gpio16 = GPIO_DIR_INPUT,
+	.gpio17 = GPIO_DIR_INPUT,
+	.gpio18 = GPIO_DIR_INPUT,
+	.gpio21 = GPIO_DIR_INPUT,
+	.gpio22 = GPIO_DIR_OUTPUT,
+	.gpio23 = GPIO_DIR_INPUT,
+	.gpio24 = GPIO_DIR_OUTPUT,
+	.gpio27 = GPIO_DIR_INPUT,
+	.gpio28 = GPIO_DIR_OUTPUT,
+	.gpio29 = GPIO_DIR_OUTPUT,
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_level = {
+	.gpio0 = GPIO_LEVEL_LOW,
+	.gpio2 = GPIO_LEVEL_HIGH,
+	.gpio22 = GPIO_LEVEL_HIGH,
+	.gpio24 = GPIO_LEVEL_LOW,
+	.gpio28 = GPIO_LEVEL_LOW,
+	.gpio29 = GPIO_LEVEL_HIGH,
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_reset = {
+	.gpio24 = GPIO_RESET_RSMRST,
+	.gpio30 = GPIO_RESET_RSMRST,
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_invert = {
+	.gpio1 = GPIO_INVERT,
+	.gpio3 = GPIO_INVERT,
+	.gpio5 = GPIO_INVERT,
+	.gpio6 = GPIO_INVERT,
+	.gpio7 = GPIO_INVERT,
+	.gpio10 = GPIO_INVERT,
+	.gpio11 = GPIO_INVERT,
+	.gpio13 = GPIO_INVERT,
+	.gpio14 = GPIO_INVERT,
+};
+
+static const struct pch_gpio_set1 pch_gpio_set1_blink = {
+};
+
+static const struct pch_gpio_set2 pch_gpio_set2_mode = {
+	.gpio32 = GPIO_MODE_NATIVE,
+	.gpio33 = GPIO_MODE_GPIO,
+	.gpio34 = GPIO_MODE_GPIO,
+	.gpio35 = GPIO_MODE_GPIO,
+	.gpio36 = GPIO_MODE_GPIO,
+	.gpio37 = GPIO_MODE_GPIO,
+	.gpio38 = GPIO_MODE_GPIO,
+	.gpio39 = GPIO_MODE_GPIO,
+	.gpio40 = GPIO_MODE_NATIVE,
+	.gpio41 = GPIO_MODE_NATIVE,
+	.gpio42 = GPIO_MODE_NATIVE,
+	.gpio43 = GPIO_MODE_NATIVE,
+	.gpio44 = GPIO_MODE_GPIO,
+	.gpio45 = GPIO_MODE_NATIVE,
+	.gpio46 = GPIO_MODE_GPIO,
+	.gpio47 = GPIO_MODE_NATIVE,
+	.gpio48 = GPIO_MODE_GPIO,
+	.gpio49 = GPIO_MODE_GPIO,
+	.gpio50 = GPIO_MODE_GPIO,
+	.gpio51 = GPIO_MODE_GPIO,
+	.gpio52 = GPIO_MODE_GPIO,
+	.gpio53 = GPIO_MODE_GPIO,
+	.gpio54 = GPIO_MODE_GPIO,
+	.gpio55 = GPIO_MODE_GPIO,
+	.gpio56 = GPIO_MODE_NATIVE,
+	.gpio57 = GPIO_MODE_GPIO,
+	.gpio58 = GPIO_MODE_NATIVE,
+	.gpio59 = GPIO_MODE_NATIVE,
+	.gpio60 = GPIO_MODE_GPIO,
+	.gpio61 = GPIO_MODE_GPIO,
+	.gpio62 = GPIO_MODE_NATIVE,
+	.gpio63 = GPIO_MODE_NATIVE,
+};
+
+static const struct pch_gpio_set2 pch_gpio_set2_direction = {
+	.gpio33 = GPIO_DIR_OUTPUT,
+	.gpio34 = GPIO_DIR_INPUT,
+	.gpio35 = GPIO_DIR_INPUT,
+	.gpio36 = GPIO_DIR_OUTPUT,
+	.gpio37 = GPIO_DIR_OUTPUT,
+	.gpio38 = GPIO_DIR_INPUT,
+	.gpio39 = GPIO_DIR_INPUT,
+	.gpio44 = GPIO_DIR_INPUT,
+	.gpio46 = GPIO_DIR_INPUT,
+	.gpio48 = GPIO_DIR_INPUT,
+	.gpio49 = GPIO_DIR_INPUT,
+	.gpio50 = GPIO_DIR_INPUT,
+	.gpio51 = GPIO_DIR_INPUT,
+	.gpio52 = GPIO_DIR_INPUT,
+	.gpio53 = GPIO_DIR_OUTPUT,
+	.gpio54 = GPIO_DIR_INPUT,
+	.gpio55 = GPIO_DIR_INPUT,
+	.gpio57 = GPIO_DIR_OUTPUT,
+	.gpio60 = GPIO_DIR_OUTPUT,
+	.gpio61 = GPIO_DIR_OUTPUT,
+};
+
+static const struct pch_gpio_set2 pch_gpio_set2_level = {
+	.gpio33 = GPIO_LEVEL_LOW,
+	.gpio36 = GPIO_LEVEL_LOW,
+	.gpio37 = GPIO_LEVEL_LOW,
+	.gpio53 = GPIO_LEVEL_HIGH,
+	.gpio57 = GPIO_LEVEL_HIGH,
+	.gpio60 = GPIO_LEVEL_HIGH,
+	.gpio61 = GPIO_LEVEL_LOW,
+};
+
+static const struct pch_gpio_set2 pch_gpio_set2_reset = {
+};
+
+static const struct pch_gpio_set3 pch_gpio_set3_mode = {
+	.gpio64 = GPIO_MODE_NATIVE,
+	.gpio65 = GPIO_MODE_GPIO,
+	.gpio66 = GPIO_MODE_NATIVE,
+	.gpio67 = GPIO_MODE_NATIVE,
+	.gpio68 = GPIO_MODE_GPIO,
+	.gpio69 = GPIO_MODE_GPIO,
+	.gpio70 = GPIO_MODE_GPIO,
+	.gpio71 = GPIO_MODE_GPIO,
+	.gpio72 = GPIO_MODE_GPIO,
+	.gpio73 = GPIO_MODE_GPIO,
+	.gpio74 = GPIO_MODE_NATIVE,
+	.gpio75 = GPIO_MODE_NATIVE,
+};
+
+static const struct pch_gpio_set3 pch_gpio_set3_direction = {
+	.gpio65 = GPIO_DIR_INPUT,
+	.gpio68 = GPIO_DIR_OUTPUT,
+	.gpio69 = GPIO_DIR_INPUT,
+	.gpio70 = GPIO_DIR_OUTPUT,
+	.gpio71 = GPIO_DIR_OUTPUT,
+	.gpio72 = GPIO_DIR_OUTPUT,
+	.gpio73 = GPIO_DIR_OUTPUT,
+};
+
+static const struct pch_gpio_set3 pch_gpio_set3_level = {
+	.gpio68 = GPIO_LEVEL_HIGH,
+	.gpio70 = GPIO_LEVEL_HIGH,
+	.gpio71 = GPIO_LEVEL_HIGH,
+	.gpio72 = GPIO_LEVEL_LOW,
+	.gpio73 = GPIO_LEVEL_HIGH,
+};
+
+static const struct pch_gpio_set3 pch_gpio_set3_reset = {
+};
+
+const struct pch_gpio_map mainboard_gpio_map = {
+	.set1 = {
+		.mode		= &pch_gpio_set1_mode,
+		.direction	= &pch_gpio_set1_direction,
+		.level		= &pch_gpio_set1_level,
+		.blink		= &pch_gpio_set1_blink,
+		.invert		= &pch_gpio_set1_invert,
+		.reset		= &pch_gpio_set1_reset,
+	},
+	.set2 = {
+		.mode		= &pch_gpio_set2_mode,
+		.direction	= &pch_gpio_set2_direction,
+		.level		= &pch_gpio_set2_level,
+		.reset		= &pch_gpio_set2_reset,
+	},
+	.set3 = {
+		.mode		= &pch_gpio_set3_mode,
+		.direction	= &pch_gpio_set3_direction,
+		.level		= &pch_gpio_set3_level,
+		.reset		= &pch_gpio_set3_reset,
+	},
+};
diff --git a/src/mainboard/hp/revolve_810_g1/hda_verb.c b/src/mainboard/hp/revolve_810_g1/hda_verb.c
new file mode 100644
index 0000000..c7d5662
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/hda_verb.c
@@ -0,0 +1,82 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2014 Vladimir Serbinenko
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <device/azalia_device.h>
+
+const u32 cim_verb_data[] = {
+	0x111d76e0, /* Codec Vendor / Device ID: IDT */
+	0x103c18f8, /* Subsystem ID */
+
+	0x0000000b, /* Number of 4 dword sets */
+	/* NID 0x01: Subsystem ID.  */
+	AZALIA_SUBVENDOR(0x0, 0x103c18f8),
+
+	/* NID 0x0a.  */
+	AZALIA_PIN_CFG(0x0, 0x0a, 0x21011030),
+
+	/* NID 0x0b.  */
+	AZALIA_PIN_CFG(0x0, 0x0b, 0x0421101f),
+
+	/* NID 0x0c.  */
+	AZALIA_PIN_CFG(0x0, 0x0c, 0x04a11020),
+
+	/* NID 0x0d.  */
+	AZALIA_PIN_CFG(0x0, 0x0d, 0x90170110),
+
+	/* NID 0x0e.  */
+	AZALIA_PIN_CFG(0x0, 0x0e, 0x40f000f0),
+
+	/* NID 0x0f.  */
+	AZALIA_PIN_CFG(0x0, 0x0f, 0x2181102e),
+
+	/* NID 0x10.  */
+	AZALIA_PIN_CFG(0x0, 0x10, 0x40f000f0),
+
+	/* NID 0x11.  */
+	AZALIA_PIN_CFG(0x0, 0x11, 0xd5a30140),
+
+	/* NID 0x1f.  */
+	AZALIA_PIN_CFG(0x0, 0x1f, 0x40f000f0),
+
+	/* NID 0x20.  */
+	AZALIA_PIN_CFG(0x0, 0x20, 0x40f000f0),
+	0x11c11040, /* Codec Vendor / Device ID: LSI */
+	0x103c3066, /* Subsystem ID */
+
+	0x00000001, /* Number of 4 dword sets */
+	/* NID 0x01: Subsystem ID.  */
+	AZALIA_SUBVENDOR(0x1, 0x103c3066),
+	0x80862806, /* Codec Vendor / Device ID: Intel */
+	0x80860101, /* Subsystem ID */
+
+	0x00000004, /* Number of 4 dword sets */
+	/* NID 0x01: Subsystem ID.  */
+	AZALIA_SUBVENDOR(0x3, 0x80860101),
+
+	/* NID 0x05.  */
+	AZALIA_PIN_CFG(0x3, 0x05, 0x18560010),
+
+	/* NID 0x06.  */
+	AZALIA_PIN_CFG(0x3, 0x06, 0x58560020),
+
+	/* NID 0x07.  */
+	AZALIA_PIN_CFG(0x3, 0x07, 0x18560030),
+};
+
+const u32 pc_beep_verbs[0] = {};
+
+AZALIA_ARRAY_SIZES;
diff --git a/src/mainboard/hp/revolve_810_g1/mainboard.c b/src/mainboard/hp/revolve_810_g1/mainboard.c
new file mode 100644
index 0000000..e9228c1
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/mainboard.c
@@ -0,0 +1,28 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Bill Xie <persmule at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <device/device.h>
+#include <drivers/intel/gma/int15.h>
+
+static void mainboard_enable(device_t dev)
+{
+	install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS,
+			GMA_INT15_PANEL_FIT_DEFAULT,
+		        GMA_INT15_BOOT_DISPLAY_DEFAULT, 0);
+}
+
+struct chip_operations mainboard_ops = {
+	.enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/hp/revolve_810_g1/romstage.c b/src/mainboard/hp/revolve_810_g1/romstage.c
new file mode 100644
index 0000000..cf19789
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/romstage.c
@@ -0,0 +1,99 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright (C) 2014 Vladimir Serbinenko
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <lib.h>
+#include <cbfs.h>
+#include <timestamp.h>
+#include <arch/byteorder.h>
+#include <arch/io.h>
+#include <device/pci_def.h>
+#include <device/pnp_def.h>
+#include <cpu/x86/lapic.h>
+#include <arch/acpi.h>
+#include <console/console.h>
+#include "northbridge/intel/sandybridge/sandybridge.h"
+#include "northbridge/intel/sandybridge/raminit_native.h"
+#include "southbridge/intel/bd82x6x/pch.h"
+#include <southbridge/intel/common/gpio.h>
+#include <arch/cpu.h>
+#include <cpu/x86/msr.h>
+#include <ec/hp/kbc1126/ec.h>
+
+void pch_enable_lpc(void)
+{
+	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x3f0f);
+	pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x007c0201);
+	pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x000c0101);
+	pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x8c, 0x00fcfe01);
+	pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x90, 0x000402e9);
+	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010);
+}
+
+void rcba_config(void)
+{
+	/* Disable devices.  */
+	RCBA32(0x3414) = 0x00000000;
+	RCBA32(0x3418) = 0x17f21feb;
+
+}
+const struct southbridge_usb_port mainboard_usb_ports[] = {
+	{ 1, 1, 0 },
+	{ 1, 0, 0 },
+	{ 1, 1, 1 },
+	{ 1, 1, 1 },
+	{ 1, 0, 2 },
+	{ 1, 0, 2 },
+	{ 1, 0, 3 },
+	{ 1, 0, 3 },
+	{ 1, 0, 4 },
+	{ 1, 0, 4 },
+	{ 1, 1, 5 },
+	{ 1, 0, 5 },
+	{ 1, 0, 6 },
+	{ 1, 0, 6 },
+};
+
+void mainboard_early_init(int s3resume)
+{
+}
+
+void mainboard_config_superio(void)
+{
+	kbc1126_enter_conf();
+	kbc1126_mailbox_init();
+	kbc1126_kbc_init();
+	kbc1126_ec_init();
+	kbc1126_pm1_init();
+	kbc1126_exit_conf();
+}
+
+/* FIXME: Put proper SPD map here. */
+void mainboard_get_spd(spd_raw_data *spd, bool id_only)
+{
+	/* C1S0 is a soldered RAM with no real SPD. Use stored SPD.  */
+	size_t spd_file_len = 0;
+	void *spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD,
+		&spd_file_len);
+
+	if (!spd_file || spd_file_len < sizeof(spd_raw_data))
+		die("SPD data for C1S0 not found.");
+
+	read_spd(&spd[0], 0x50, id_only);
+	memcpy(&spd[2], spd_file, spd_file_len);
+}
diff --git a/src/mainboard/hp/revolve_810_g1/spd/hynix_4g.spd.hex b/src/mainboard/hp/revolve_810_g1/spd/hynix_4g.spd.hex
new file mode 100644
index 0000000..544d576
--- /dev/null
+++ b/src/mainboard/hp/revolve_810_g1/spd/hynix_4g.spd.hex
@@ -0,0 +1,16 @@
+92 11 0b 03 04 00 00 01 03 52 01 08 0a 00 80 00
+6e 78 6e 32 6e 11 18 81 20 08 3c 3c 00 f0 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 65 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 b6 3b
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

-- 
To view, visit https://review.coreboot.org/22972
To unsubscribe, or for help writing mail filters, visit https://review.coreboot.org/settings

Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: Iba9c361591697e6a2b3b7b485f7f1649c2a83524
Gerrit-Change-Number: 22972
Gerrit-PatchSet: 1
Gerrit-Owner: Bill XIE <persmule at gmail.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot-gerrit/attachments/20171222/dc1a5e18/attachment-0001.html>


More information about the coreboot-gerrit mailing list