[coreboot-gerrit] Change in coreboot[master]: AGESA mainboards: Clean up IS_ENABLED fan control
Marshall Dawson (Code Review)
gerrit at coreboot.org
Thu Aug 17 02:09:57 CEST 2017
Marshall Dawson has uploaded this change for review. ( https://review.coreboot.org/21059
Change subject: AGESA mainboards: Clean up IS_ENABLED fan control
......................................................................
AGESA mainboards: Clean up IS_ENABLED fan control
Remove all checks for #if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) around
the imc.h includes. Convert all #if to if() for fan control setup.
Change-Id: I04a9fbbf6f64f45e1a0b544267bfe840ce7fa1d9
Signed-off-by: Marshall Dawson <marshalldawson3rd at gmail.com>
---
M src/mainboard/amd/olivehill/BiosCallOuts.c
M src/mainboard/amd/parmer/BiosCallOuts.c
M src/mainboard/amd/thatcher/BiosCallOuts.c
M src/mainboard/asrock/imb-a180/BiosCallOuts.c
M src/mainboard/bap/ode_e20XX/BiosCallOuts.c
M src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c
M src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.c
M src/mainboard/lenovo/g505s/BiosCallOuts.c
8 files changed, 500 insertions(+), 525 deletions(-)
git pull ssh://review.coreboot.org:29418/coreboot refs/changes/59/21059/1
diff --git a/src/mainboard/amd/olivehill/BiosCallOuts.c b/src/mainboard/amd/olivehill/BiosCallOuts.c
index 2361c03..d5901ca 100644
--- a/src/mainboard/amd/olivehill/BiosCallOuts.c
+++ b/src/mainboard/amd/olivehill/BiosCallOuts.c
@@ -20,9 +20,7 @@
#include "heapManager.h"
#include "FchPlatform.h"
#include "cbfs.h"
-#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
#include "imc.h"
-#endif
#include <stdlib.h>
static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr);
@@ -109,72 +107,70 @@
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
/* Enable IMC fan control. the recommand way */
-#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+ if(IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) {
+ imc_reg_init();
- imc_reg_init();
+ /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
- /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
- FchParams->Hwm.HwMonitorEnable = TRUE;
- FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
+ FchParams->Imc.ImcEnable = TRUE;
+ FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
+ FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
- FchParams->Imc.ImcEnable = TRUE;
- FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
- FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
+ LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
- LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+ /* Thermal Zone Parameter */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e;//6 | BIT3;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
- /* Thermal Zone Parameter */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e;//6 | BIT3;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
+ /* IMC Fan Policy temperature thresholds */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
- /* IMC Fan Policy temperature thresholds */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80; /*AC0 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
+ /* IMC Fan Policy PWM Settings */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
- /* IMC Fan Policy PWM Settings */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
+ FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
- FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
-
- /* NOTE:
- * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
- * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
- * so we remove it from AGESA code. Please Seee FchInitLateHwm.
- */
-
-#else /* HWM fan control, the way not recommand */
- FchParams->Imc.ImcEnable = FALSE;
- FchParams->Hwm.HwMonitorEnable = TRUE;
- FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
-
-#endif /* CONFIG_HUDSON_IMC_FWM */
+ /* NOTE:
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
+ * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
+ * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ */
+ } else {
+ /* HWM fan control, the way not recommand */
+ FchParams->Imc.ImcEnable = FALSE;
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
+ }
}
/**
diff --git a/src/mainboard/amd/parmer/BiosCallOuts.c b/src/mainboard/amd/parmer/BiosCallOuts.c
index c83e318..88a4657 100644
--- a/src/mainboard/amd/parmer/BiosCallOuts.c
+++ b/src/mainboard/amd/parmer/BiosCallOuts.c
@@ -20,9 +20,7 @@
#include "heapManager.h"
#include "FchPlatform.h"
#include "cbfs.h"
-#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
#include "imc.h"
-#endif
#include <stdlib.h>
static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr);
@@ -109,72 +107,70 @@
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
/* Enable IMC fan control. the recommand way */
-#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+ if(IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) {
+ imc_reg_init();
- imc_reg_init();
+ /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
- /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
- FchParams->Hwm.HwMonitorEnable = TRUE;
- FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
+ FchParams->Imc.ImcEnable = TRUE;
+ FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
+ FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
- FchParams->Imc.ImcEnable = TRUE;
- FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
- FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
+ LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
- LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+ /* Thermal Zone Parameter */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e;//6 | BIT3;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
- /* Thermal Zone Parameter */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e;//6 | BIT3;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
+ /* IMC Fan Policy temperature thresholds */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
- /* IMC Fan Policy temperature thresholds */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80; /*AC0 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
+ /* IMC Fan Policy PWM Settings */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
- /* IMC Fan Policy PWM Settings */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
+ FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
- FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
-
- /* NOTE:
- * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
- * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
- * so we remove it from AGESA code. Please Seee FchInitLateHwm.
- */
-
-#else /* HWM fan control, the way not recommand */
- FchParams->Imc.ImcEnable = FALSE;
- FchParams->Hwm.HwMonitorEnable = TRUE;
- FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
-
-#endif /* CONFIG_HUDSON_IMC_FWM */
+ /* NOTE:
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
+ * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
+ * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ */
+ } else {
+ /* HWM fan control, the way not recommand */
+ FchParams->Imc.ImcEnable = FALSE;
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
+ }
}
/**
diff --git a/src/mainboard/amd/thatcher/BiosCallOuts.c b/src/mainboard/amd/thatcher/BiosCallOuts.c
index a6a6279..1cb19bd 100644
--- a/src/mainboard/amd/thatcher/BiosCallOuts.c
+++ b/src/mainboard/amd/thatcher/BiosCallOuts.c
@@ -20,9 +20,7 @@
#include "heapManager.h"
#include "FchPlatform.h"
#include "cbfs.h"
-#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
#include "imc.h"
-#endif
#include <stdlib.h>
static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr);
@@ -109,72 +107,70 @@
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
/* Enable IMC fan control. the recommand way */
-#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+ if(IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) {
+ imc_reg_init();
- imc_reg_init();
+ /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
- /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
- FchParams->Hwm.HwMonitorEnable = TRUE;
- FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
+ FchParams->Imc.ImcEnable = TRUE;
+ FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
+ FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
- FchParams->Imc.ImcEnable = TRUE;
- FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
- FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
+ LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
- LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+ /* Thermal Zone Parameter */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e;//6 | BIT3;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
- /* Thermal Zone Parameter */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e;//6 | BIT3;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
+ /* IMC Fan Policy temperature thresholds */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
- /* IMC Fan Policy temperature thresholds */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80; /*AC0 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
+ /* IMC Fan Policy PWM Settings */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
- /* IMC Fan Policy PWM Settings */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
+ FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
- FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
-
- /* NOTE:
- * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
- * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
- * so we remove it from AGESA code. Please Seee FchInitLateHwm.
- */
-
-#else /* HWM fan control, the way not recommand */
- FchParams->Imc.ImcEnable = FALSE;
- FchParams->Hwm.HwMonitorEnable = TRUE;
- FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
-
-#endif /* CONFIG_HUDSON_IMC_FWM */
+ /* NOTE:
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
+ * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
+ * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ */
+ } else {
+ /* HWM fan control, the way not recommand */
+ FchParams->Imc.ImcEnable = FALSE;
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
+ }
}
/**
diff --git a/src/mainboard/asrock/imb-a180/BiosCallOuts.c b/src/mainboard/asrock/imb-a180/BiosCallOuts.c
index 163ae62..44e74fe 100644
--- a/src/mainboard/asrock/imb-a180/BiosCallOuts.c
+++ b/src/mainboard/asrock/imb-a180/BiosCallOuts.c
@@ -166,127 +166,126 @@
LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof(FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
/* Enable IMC fan control. the recommand way */
-#if defined CONFIG_HUDSON_IMC_FWM && (CONFIG_HUDSON_IMC_FWM == 1)
- /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
- FchParams->Hwm.HwMonitorEnable = TRUE;
- FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
+ if(IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) {
+ /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
- FchParams->Imc.ImcEnable = TRUE;
- FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
- FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
+ FchParams->Imc.ImcEnable = TRUE;
+ FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
+ FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
- LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+ LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
- /* Thermal Zone Parameter */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; //BIT0 | BIT2 | BIT5;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00;//6 | BIT3;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0;
+ /* Thermal Zone Parameter */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00;//6 | BIT3;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0;
- /* IMC Fan Policy temperature thresholds */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0;///80; /*AC0 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0; /*AC1 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0; /*AC2 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
+ /* IMC Fan Policy temperature thresholds */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0;///80; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
- /* IMC Fan Policy PWM Settings */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0; /* AL0 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0; /* AL1 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0; /* AL2 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00; /* AL3 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00; /* AL4 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00; /* AL5 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00; /* AL6 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00; /* AL7 percentage */
+ /* IMC Fan Policy PWM Settings */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00; /* AL7 percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;//BIT0 | BIT2 | BIT5;
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;//BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
- /* IMC Function */
- FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;//BIT0 | BIT4 |BIT8;
+ /* IMC Function */
+ FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;//BIT0 | BIT4 |BIT8;
- /* NOTE:
- * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
- * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
- * so we remove it from AGESA code. Please Seee FchInitLateHwm.
- */
-
-#else /* HWM fan control, the way not recommand */
- FchParams->Imc.ImcEnable = FALSE;
- FchParams->Hwm.HwMonitorEnable = TRUE;
- FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
-
-#endif /* CONFIG_HUDSON_IMC_FWM */
+ /* NOTE:
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
+ * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
+ * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ */
+ } else {
+ /* HWM fan control, the way not recommand */
+ FchParams->Imc.ImcEnable = FALSE;
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
+ }
}
#endif
diff --git a/src/mainboard/bap/ode_e20XX/BiosCallOuts.c b/src/mainboard/bap/ode_e20XX/BiosCallOuts.c
index e6773b8..2e069f2 100644
--- a/src/mainboard/bap/ode_e20XX/BiosCallOuts.c
+++ b/src/mainboard/bap/ode_e20XX/BiosCallOuts.c
@@ -20,9 +20,7 @@
#include "heapManager.h"
#include "FchPlatform.h"
#include "cbfs.h"
-#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
#include "imc.h"
-#endif
#include <stdlib.h>
#include <spd_bin.h>
@@ -111,72 +109,70 @@
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
/* Enable IMC fan control. the recommand way */
-#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+ if(IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) {
+ imc_reg_init();
- imc_reg_init();
+ /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
- /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
- FchParams->Hwm.HwMonitorEnable = TRUE;
- FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
+ FchParams->Imc.ImcEnable = TRUE;
+ FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
+ FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
- FchParams->Imc.ImcEnable = TRUE;
- FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
- FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
+ LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
- LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+ /* Thermal Zone Parameter */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e;//6 | BIT3;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
- /* Thermal Zone Parameter */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e;//6 | BIT3;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
+ /* IMC Fan Policy temperature thresholds */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 50; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 45; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 40; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
- /* IMC Fan Policy temperature thresholds */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 50; /*AC0 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 45; /*AC1 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 40; /*AC2 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
+ /* IMC Fan Policy PWM Settings */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 100; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 99; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 98; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
- /* IMC Fan Policy PWM Settings */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 100; /* AL0 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 99; /* AL1 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 98; /* AL2 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
+ FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
- FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
-
- /* NOTE:
- * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
- * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
- * so we remove it from AGESA code. Please Seee FchInitLateHwm.
- */
-
-#else /* HWM fan control, the way not recommand */
- FchParams->Imc.ImcEnable = FALSE;
- FchParams->Hwm.HwMonitorEnable = TRUE;
- FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
-
-#endif /* CONFIG_HUDSON_IMC_FWM */
+ /* NOTE:
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
+ * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
+ * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ */
+ } else {
+ /* HWM fan control, the way not recommand */
+ FchParams->Imc.ImcEnable = FALSE;
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
+ }
}
/**
diff --git a/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c b/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c
index b639e96..5efae30 100644
--- a/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c
+++ b/src/mainboard/gizmosphere/gizmo2/BiosCallOuts.c
@@ -20,9 +20,7 @@
#include "heapManager.h"
#include "FchPlatform.h"
#include "cbfs.h"
-#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
#include "imc.h"
-#endif
#include <stdlib.h>
static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr);
@@ -109,72 +107,70 @@
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
/* Enable IMC fan control. the recommand way */
-#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+ if(IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) {
+ imc_reg_init();
- imc_reg_init();
+ /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
- /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
- FchParams->Hwm.HwMonitorEnable = TRUE;
- FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
+ FchParams->Imc.ImcEnable = TRUE;
+ FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
+ FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
- FchParams->Imc.ImcEnable = TRUE;
- FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
- FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
+ LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
- LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+ /* Thermal Zone Parameter */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e;//6 | BIT3;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
- /* Thermal Zone Parameter */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e;//6 | BIT3;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
+ /* IMC Fan Policy temperature thresholds */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 50; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 45; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 40; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
- /* IMC Fan Policy temperature thresholds */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 50; /*AC0 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 45; /*AC1 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 40; /*AC2 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
+ /* IMC Fan Policy PWM Settings */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 100; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 99; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 98; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
- /* IMC Fan Policy PWM Settings */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 100; /* AL0 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 99; /* AL1 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 98; /* AL2 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
+ FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
- FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
-
- /* NOTE:
- * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
- * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
- * so we remove it from AGESA code. Please Seee FchInitLateHwm.
- */
-
-#else /* HWM fan control, the way not recommand */
- FchParams->Imc.ImcEnable = FALSE;
- FchParams->Hwm.HwMonitorEnable = TRUE;
- FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
-
-#endif /* CONFIG_HUDSON_IMC_FWM */
+ /* NOTE:
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
+ * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
+ * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ */
+ } else {
+ /* HWM fan control, the way not recommand */
+ FchParams->Imc.ImcEnable = FALSE;
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
+ }
}
/**
diff --git a/src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.c b/src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.c
index 87d6eae..2e26b3d 100644
--- a/src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.c
+++ b/src/mainboard/hp/pavilion_m6_1035dx/BiosCallOuts.c
@@ -105,72 +105,70 @@
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
/* Enable IMC fan control. the recommand way */
-#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+ if(IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) {
+ imc_reg_init();
- imc_reg_init();
+ /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
- /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
- FchParams->Hwm.HwMonitorEnable = TRUE;
- FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
+ FchParams->Imc.ImcEnable = TRUE;
+ FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
+ FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
- FchParams->Imc.ImcEnable = TRUE;
- FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
- FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
+ LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
- LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+ /* Thermal Zone Parameter */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e;//6 | BIT3;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
- /* Thermal Zone Parameter */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e;//6 | BIT3;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
+ /* IMC Fan Policy temperature thresholds */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
- /* IMC Fan Policy temperature thresholds */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80; /*AC0 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
+ /* IMC Fan Policy PWM Settings */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
- /* IMC Fan Policy PWM Settings */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
+ FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
- FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
-
- /* NOTE:
- * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
- * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
- * so we remove it from AGESA code. Please Seee FchInitLateHwm.
- */
-
-#else /* HWM fan control, the way not recommand */
- FchParams->Imc.ImcEnable = FALSE;
- FchParams->Hwm.HwMonitorEnable = TRUE;
- FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
-
-#endif /* CONFIG_HUDSON_IMC_FWM */
+ /* NOTE:
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
+ * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
+ * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ */
+ } else {
+ /* HWM fan control, the way not recommand */
+ FchParams->Imc.ImcEnable = FALSE;
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
+ }
}
/**
diff --git a/src/mainboard/lenovo/g505s/BiosCallOuts.c b/src/mainboard/lenovo/g505s/BiosCallOuts.c
index 87d6eae..2e26b3d 100644
--- a/src/mainboard/lenovo/g505s/BiosCallOuts.c
+++ b/src/mainboard/lenovo/g505s/BiosCallOuts.c
@@ -105,72 +105,70 @@
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
/* Enable IMC fan control. the recommand way */
-#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+ if(IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) {
+ imc_reg_init();
- imc_reg_init();
+ /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
- /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
- FchParams->Hwm.HwMonitorEnable = TRUE;
- FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
+ FchParams->Imc.ImcEnable = TRUE;
+ FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
+ FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
- FchParams->Imc.ImcEnable = TRUE;
- FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
- FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
+ LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
- LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+ /* Thermal Zone Parameter */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e;//6 | BIT3;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
- /* Thermal Zone Parameter */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e;//6 | BIT3;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
- FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
+ /* IMC Fan Policy temperature thresholds */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
- /* IMC Fan Policy temperature thresholds */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46;///80; /*AC0 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
- FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
+ /* IMC Fan Policy PWM Settings */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
- /* IMC Fan Policy PWM Settings */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
- FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
+ FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
- FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
-
- /* NOTE:
- * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
- * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
- * so we remove it from AGESA code. Please Seee FchInitLateHwm.
- */
-
-#else /* HWM fan control, the way not recommand */
- FchParams->Imc.ImcEnable = FALSE;
- FchParams->Hwm.HwMonitorEnable = TRUE;
- FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
-
-#endif /* CONFIG_HUDSON_IMC_FWM */
+ /* NOTE:
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
+ * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
+ * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ */
+ } else {
+ /* HWM fan control, the way not recommand */
+ FchParams->Imc.ImcEnable = FALSE;
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
+ }
}
/**
--
To view, visit https://review.coreboot.org/21059
To unsubscribe, visit https://review.coreboot.org/settings
Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-MessageType: newchange
Gerrit-Change-Id: I04a9fbbf6f64f45e1a0b544267bfe840ce7fa1d9
Gerrit-Change-Number: 21059
Gerrit-PatchSet: 1
Gerrit-Owner: Marshall Dawson <marshalldawson3rd at gmail.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.coreboot.org/pipermail/coreboot-gerrit/attachments/20170817/b75c4424/attachment-0001.html>
More information about the coreboot-gerrit
mailing list