[coreboot-gerrit] Change in coreboot[master]: sb/intel/i82801lx: Route all PIRQ to INT11

[Arthur Heymans (Code Review)]

Arthur Heymans has uploaded a new patch set (#2). ( https://review.coreboot.org/19254 )

Change subject: sb/intel/i82801lx: Route all PIRQ to INT11
......................................................................

sb/intel/i82801lx: Route all PIRQ to INT11

Interrupt 11 is not used by legacy devices and so can always be used
for PCI interrupts. Full legacy IRQ routing is complicated and hard to
get right.

Change-Id: I6c718f4b9fb91ffcc4a136120581a4fcd7ec7231
Signed-off-by: Arthur Heymans <arthur at aheymans.xyz>
---
M src/southbridge/intel/i82801lx/chip.h
M src/southbridge/intel/i82801lx/lpc.c
2 files changed, 21 insertions(+), 33 deletions(-)


  git pull ssh://review.coreboot.org:29418/coreboot refs/changes/54/19254/2
-- 
To view, visit https://review.coreboot.org/19254
To unsubscribe, visit https://review.coreboot.org/settings

Gerrit-MessageType: newpatchset
Gerrit-Change-Id: I6c718f4b9fb91ffcc4a136120581a4fcd7ec7231
Gerrit-PatchSet: 2
Gerrit-Project: coreboot
Gerrit-Branch: master
Gerrit-Owner: Arthur Heymans <arthur at aheymans.xyz>