[coreboot-gerrit] New patch to review for coreboot: [WIP] console/Kconfig: Calculate COM port base addresses only on x86
Jonathan Neuschäfer (j.neuschaefer@gmx.net)
gerrit at coreboot.org
Tue Oct 11 18:45:19 CEST 2016
Jonathan Neuschäfer (j.neuschaefer at gmx.net) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/16982
-gerrit
commit b2aadaeba9c8e65e5cd8da240a4b02cc44cfa1e1
Author: Jonathan Neuschäfer <j.neuschaefer at gmx.net>
Date: Tue Oct 11 18:28:26 2016 +0200
[WIP] console/Kconfig: Calculate COM port base addresses only on x86
On other architectures, the serial ports aren't mapped at 0x3f8.
WIP: I'm not sure how exactly the dependency should be encoded in
Kconfig.
Change-Id: Ia1de545325a53607f62d08e76b2f61b25edbe6ef
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer at gmx.net>
---
src/console/Kconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/src/console/Kconfig b/src/console/Kconfig
index 8f74613..278d193 100644
--- a/src/console/Kconfig
+++ b/src/console/Kconfig
@@ -57,6 +57,7 @@ config UART_FOR_CONSOLE
# FIXME: Early programming in romstage is incorrect as we should
# program different LDN to actually change the physical port.
+if ARCH_X86
config TTYS0_BASE
hex
depends on DRIVERS_UART
@@ -75,6 +76,7 @@ comment "Serial port base address = 0x3e8"
depends on UART_FOR_CONSOLE = 2
comment "Serial port base address = 0x2e8"
depends on UART_FOR_CONSOLE = 3
+endif # ARCH_X86
choice
prompt "Baud rate"
More information about the coreboot-gerrit
mailing list