[coreboot-gerrit] New patch to review for coreboot: Add/Combine Haswell Chromebooks using variant board scheme
Matt DeVillier (matt.devillier@gmail.com)
gerrit at coreboot.org
Sun Nov 27 21:46:19 CET 2016
Matt DeVillier (matt.devillier at gmail.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/17621
-gerrit
commit 8427eb6e9c8fd1d89f7212ca32da7506a89cf1e6
Author: Matt DeVillier <matt.devillier at gmail.com>
Date: Sun Nov 27 02:19:02 2016 -0600
Add/Combine Haswell Chromebooks using variant board scheme
Combine existing boards google/falco and google/peppy with new
ChromeOS devices leon and wolf, using their common reference board
(slippy) as a base.
Chromium sources used:
firmware-falco_peppy-4389.81.B d7703cac [falco: Add support for Samsung...]
firmware-leon-4389.61.B ea1bf55 [haswell: Enable 2x Refresh Mode]
firmware-wolf-4389.24.B 7c5a9c2 [Wolf: haswell: Add small delay before...]
Additionally, some minor cleanup/changes were made:
- I2C devices set to use ACPI (vs PCI) mode
- I2C device ACPI entries adjusted as per above
- I2C devices set to use level (vs edge) interrupt triggering
- XHCI finalization enabled in devicetree
- HDA verb entries use simplified macro entry format
Existing google/falco and google/peppy boards will be removed in a
subsequent commit.
Variant setup modeled after google/beltino
Change-Id: I087df5f98c1bb4ddd0ab24ee9ff786a9d38d87be
Signed-off-by: Matt DeVillier <matt.devillier at gmail.com>
---
src/mainboard/google/slippy/Kconfig | 88 +++++++
src/mainboard/google/slippy/Kconfig.name | 15 ++
src/mainboard/google/slippy/Makefile.inc | 26 ++
src/mainboard/google/slippy/acpi/ec.asl | 20 ++
.../google/slippy/acpi/haswell_pci_irqs.asl | 82 +++++++
src/mainboard/google/slippy/acpi/platform.asl | 82 +++++++
src/mainboard/google/slippy/acpi/superio.asl | 25 ++
src/mainboard/google/slippy/acpi/thermal.asl | 132 ++++++++++
src/mainboard/google/slippy/acpi_tables.c | 84 +++++++
src/mainboard/google/slippy/board_info.txt | 7 +
src/mainboard/google/slippy/chromeos.c | 52 ++++
src/mainboard/google/slippy/chromeos.fmd | 38 +++
src/mainboard/google/slippy/cmos.layout | 110 +++++++++
src/mainboard/google/slippy/dsdt.asl | 67 +++++
src/mainboard/google/slippy/ec.c | 47 ++++
src/mainboard/google/slippy/ec.h | 55 +++++
src/mainboard/google/slippy/fadt.c | 152 ++++++++++++
src/mainboard/google/slippy/mainboard.c | 97 ++++++++
src/mainboard/google/slippy/onboard.h | 39 +++
src/mainboard/google/slippy/romstage.c | 24 ++
src/mainboard/google/slippy/smihandler.c | 154 ++++++++++++
src/mainboard/google/slippy/thermal.h | 33 +++
src/mainboard/google/slippy/variant.h | 21 ++
.../google/slippy/variants/falco/Makefile.inc | 43 ++++
.../google/slippy/variants/falco/devicetree.cb | 125 ++++++++++
src/mainboard/google/slippy/variants/falco/gma.c | 246 +++++++++++++++++++
.../google/slippy/variants/falco/hda_verb.c | 103 ++++++++
.../google/slippy/variants/falco/i915io.c | 125 ++++++++++
.../falco/include/variant/acpi/mainboard.asl | 84 +++++++
.../slippy/variants/falco/include/variant/gpio.h | 120 +++++++++
.../variants/falco/include/variant/mainboard.h | 21 ++
.../google/slippy/variants/falco/romstage.c | 175 +++++++++++++
.../variants/falco/spd/Elpida_EDJ4216EFBG.spd.hex | 17 ++
.../variants/falco/spd/Hynix_HMT425S6AFR6A.spd.hex | 17 ++
.../variants/falco/spd/Micron_4KTF25664HZ.spd.hex | 17 ++
.../falco/spd/Samsung_M471B5674QH0.spd.hex | 17 ++
.../google/slippy/variants/leon/Makefile.inc | 40 +++
.../google/slippy/variants/leon/devicetree.cb | 157 ++++++++++++
.../google/slippy/variants/leon/hda_verb.c | 103 ++++++++
.../leon/include/variant/acpi/mainboard.asl | 88 +++++++
.../slippy/variants/leon/include/variant/gpio.h | 120 +++++++++
.../google/slippy/variants/leon/romstage.c | 171 +++++++++++++
.../variants/leon/spd/Hynix_HMT425S6AFR6A.spd.hex | 17 ++
.../variants/leon/spd/Micron_4KTF25664HZ.spd.hex | 17 ++
.../variants/leon/spd/Samsung_K4B4G1646Q.spd.hex | 17 ++
.../google/slippy/variants/peppy/Makefile.inc | 42 ++++
.../google/slippy/variants/peppy/devicetree.cb | 129 ++++++++++
src/mainboard/google/slippy/variants/peppy/gma.c | 272 +++++++++++++++++++++
.../google/slippy/variants/peppy/hda_verb.c | 107 ++++++++
.../google/slippy/variants/peppy/i915io.c | 139 +++++++++++
.../peppy/include/variant/acpi/mainboard.asl | 172 +++++++++++++
.../slippy/variants/peppy/include/variant/gpio.h | 120 +++++++++
.../variants/peppy/include/variant/mainboard.h | 21 ++
.../google/slippy/variants/peppy/romstage.c | 184 ++++++++++++++
.../variants/peppy/spd/Elpida_EDJ4216EFBG.spd.hex | 17 ++
.../variants/peppy/spd/Hynix_HMT425S6AFR6A.spd.hex | 17 ++
.../variants/peppy/spd/Micron_4KTF25664HZ.spd.hex | 17 ++
.../google/slippy/variants/wolf/Makefile.inc | 39 +++
.../google/slippy/variants/wolf/devicetree.cb | 130 ++++++++++
.../google/slippy/variants/wolf/hda_verb.c | 112 +++++++++
.../wolf/include/variant/acpi/mainboard.asl | 88 +++++++
.../slippy/variants/wolf/include/variant/gpio.h | 120 +++++++++
.../google/slippy/variants/wolf/romstage.c | 175 +++++++++++++
.../variants/wolf/spd/Hynix_HMT425S6AFR6A.spd.hex | 17 ++
.../variants/wolf/spd/Micron_4KTF25664HZ.spd.hex | 17 ++
.../variants/wolf/spd/Samsung_K4B4G1646B.spd.hex | 17 ++
66 files changed, 5242 insertions(+)
diff --git a/src/mainboard/google/slippy/Kconfig b/src/mainboard/google/slippy/Kconfig
new file mode 100644
index 0000000..045d6a8
--- /dev/null
+++ b/src/mainboard/google/slippy/Kconfig
@@ -0,0 +1,88 @@
+config BOARD_GOOGLE_BASEBOARD_SLIPPY
+ def_bool n
+ select SYSTEM_TYPE_LAPTOP
+ select CPU_INTEL_HASWELL
+ select NORTHBRIDGE_INTEL_HASWELL
+ select SOUTHBRIDGE_INTEL_LYNXPOINT
+ select INTEL_LYNXPOINT_LP
+ select BOARD_ROMSIZE_KB_8192
+ select EC_GOOGLE_CHROMEEC
+ select HAVE_ACPI_TABLES
+ select HAVE_OPTION_TABLE
+ select HAVE_ACPI_RESUME
+ select HAVE_SMI_HANDLER
+ select MAINBOARD_HAS_CHROMEOS
+ select MAINBOARD_HAS_LPC_TPM
+ select MAINBOARD_HAS_NATIVE_VGA_INIT if (BOARD_GOOGLE_FALCO || BOARD_GOOGLE_PEPPY)
+ select INTEL_DP if (BOARD_GOOGLE_FALCO || BOARD_GOOGLE_PEPPY)
+ select INTEL_DDI if (BOARD_GOOGLE_FALCO || BOARD_GOOGLE_PEPPY)
+ select INTEL_INT15
+
+if BOARD_GOOGLE_BASEBOARD_SLIPPY
+
+config CHROMEOS
+ select EC_GOOGLE_CHROMEEC_SWITCHES
+ select EC_SOFTWARE_SYNC
+ select LID_SWITCH
+ select MAINBOARD_DO_NATIVE_VGA_INIT if (BOARD_GOOGLE_FALCO || BOARD_GOOGLE_PEPPY)
+ select VBOOT_VBNV_CMOS
+ select VIRTUAL_DEV_SWITCH
+
+config MAINBOARD_DIR
+ string
+ default google/slippy
+
+config VARIANT_DIR
+ string
+ default "falco" if BOARD_GOOGLE_FALCO
+ default "leon" if BOARD_GOOGLE_LEON
+ default "peppy" if BOARD_GOOGLE_PEPPY
+ default "wolf" if BOARD_GOOGLE_WOLF
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "Falco" if BOARD_GOOGLE_FALCO
+ default "Leon" if BOARD_GOOGLE_LEON
+ default "Peppy" if BOARD_GOOGLE_PEPPY
+ default "Wolf" if BOARD_GOOGLE_WOLF
+
+config MAINBOARD_FAMILY
+ string
+ default "Google_Slippy"
+
+config GBB_HWID
+ string
+ depends on CHROMEOS
+ default "X86 FALCO TEST 0289" if BOARD_GOOGLE_FALCO
+ default "X86 LEON TEST 5181" if BOARD_GOOGLE_LEON
+ default "X86 PEPPY TEST 4211" if BOARD_GOOGLE_PEPPY
+ default "X86 WOLF TEST 6457" if BOARD_GOOGLE_WOLF
+
+config DEVICETREE
+ string
+ default "variants/falco/devicetree.cb" if BOARD_GOOGLE_FALCO
+ default "variants/leon/devicetree.cb" if BOARD_GOOGLE_LEON
+ default "variants/peppy/devicetree.cb" if BOARD_GOOGLE_PEPPY
+ default "variants/wolf/devicetree.cb" if BOARD_GOOGLE_WOLF
+
+config MMCONF_BASE_ADDRESS
+ hex
+ default 0xf0000000
+
+config MAX_CPUS
+ int
+ default 8
+
+config VGA_BIOS_FILE
+ string
+ default "pci8086,0406.rom"
+
+config HAVE_IFD_BIN
+ bool
+ default n
+
+config HAVE_ME_BIN
+ bool
+ default n
+
+endif # BOARD_GOOGLE_BASEBOARD_SLIPPY
diff --git a/src/mainboard/google/slippy/Kconfig.name b/src/mainboard/google/slippy/Kconfig.name
new file mode 100644
index 0000000..4aebcff
--- /dev/null
+++ b/src/mainboard/google/slippy/Kconfig.name
@@ -0,0 +1,15 @@
+config BOARD_GOOGLE_FALCO
+ bool "Falco"
+ select BOARD_GOOGLE_BASEBOARD_SLIPPY
+
+config BOARD_GOOGLE_LEON
+ bool "Leon"
+ select BOARD_GOOGLE_BASEBOARD_SLIPPY
+
+config BOARD_GOOGLE_PEPPY
+ bool "Peppy"
+ select BOARD_GOOGLE_BASEBOARD_SLIPPY
+
+config BOARD_GOOGLE_WOLF
+ bool "Wolf"
+ select BOARD_GOOGLE_BASEBOARD_SLIPPY
diff --git a/src/mainboard/google/slippy/Makefile.inc b/src/mainboard/google/slippy/Makefile.inc
new file mode 100644
index 0000000..8c95ba1
--- /dev/null
+++ b/src/mainboard/google/slippy/Makefile.inc
@@ -0,0 +1,26 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2012 Google Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+ramstage-$(CONFIG_EC_GOOGLE_CHROMEEC) += ec.c
+
+romstage-$(CONFIG_CHROMEOS) += chromeos.c
+ramstage-$(CONFIG_CHROMEOS) += chromeos.c
+
+smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c
+
+romstage-y += variants/$(VARIANT_DIR)/romstage.c
+
+subdirs-y += variants/$(VARIANT_DIR)
+CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/include
diff --git a/src/mainboard/google/slippy/acpi/ec.asl b/src/mainboard/google/slippy/acpi/ec.asl
new file mode 100644
index 0000000..58b9a55
--- /dev/null
+++ b/src/mainboard/google/slippy/acpi/ec.asl
@@ -0,0 +1,20 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* mainboard configuration */
+#include "../ec.h"
+
+/* ACPI code for EC functions */
+#include <ec/google/chromeec/acpi/ec.asl>
diff --git a/src/mainboard/google/slippy/acpi/haswell_pci_irqs.asl b/src/mainboard/google/slippy/acpi/haswell_pci_irqs.asl
new file mode 100644
index 0000000..68ea474
--- /dev/null
+++ b/src/mainboard/google/slippy/acpi/haswell_pci_irqs.asl
@@ -0,0 +1,82 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* This is board specific information: IRQ routing for Haswell */
+
+// PCI Interrupt Routing
+Method(_PRT)
+{
+ If (PICM) {
+ Return (Package() {
+ // Onboard graphics (IGD) 0:2.0
+ Package() { 0x0002ffff, 0, 0, 16 },
+ // Mini-HD Audio 0:3.0
+ Package() { 0x0003ffff, 0, 0, 16 },
+ // High Definition Audio 0:1b.0
+ Package() { 0x001bffff, 0, 0, 22 },
+ // PCIe Root Ports 0:1c.x
+ Package() { 0x001cffff, 0, 0, 16 },
+ Package() { 0x001cffff, 1, 0, 17 },
+ Package() { 0x001cffff, 2, 0, 18 },
+ Package() { 0x001cffff, 3, 0, 19 },
+ // EHCI 0:1d.0
+ Package() { 0x001dffff, 0, 0, 19 },
+ // XHCI 0:14.0
+ Package() { 0x0014ffff, 0, 0, 18 },
+ // LPC devices 0:1f.0
+ Package() { 0x001fffff, 0, 0, 22 },
+ Package() { 0x001fffff, 1, 0, 18 },
+ Package() { 0x001fffff, 2, 0, 17 },
+ Package() { 0x001fffff, 3, 0, 16 },
+ // Serial IO 0:15.0
+ Package() { 0x0015ffff, 0, 0, 20 },
+ Package() { 0x0015ffff, 1, 0, 21 },
+ Package() { 0x0015ffff, 2, 0, 21 },
+ Package() { 0x0015ffff, 3, 0, 21 },
+ // SDIO 0:17.0
+ Package() { 0x0017ffff, 0, 0, 23 },
+ })
+ } Else {
+ Return (Package() {
+ // Onboard graphics (IGD) 0:2.0
+ Package() { 0x0002ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
+ // Mini-HD Audio 0:3.0
+ Package() { 0x0003ffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
+ // High Definition Audio 0:1b.0
+ Package() { 0x001bffff, 0, \_SB.PCI0.LPCB.LNKG, 0 },
+ // PCIe Root Ports 0:1c.x
+ Package() { 0x001cffff, 0, \_SB.PCI0.LPCB.LNKA, 0 },
+ Package() { 0x001cffff, 1, \_SB.PCI0.LPCB.LNKB, 0 },
+ Package() { 0x001cffff, 2, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x001cffff, 3, \_SB.PCI0.LPCB.LNKD, 0 },
+ // EHCI 0:1d.0
+ Package() { 0x001dffff, 0, \_SB.PCI0.LPCB.LNKD, 0 },
+ // XHCI 0:14.0
+ Package() { 0x0014ffff, 0, \_SB.PCI0.LPCB.LNKC, 0 },
+ // LPC device 0:1f.0
+ Package() { 0x001fffff, 0, \_SB.PCI0.LPCB.LNKG, 0 },
+ Package() { 0x001fffff, 1, \_SB.PCI0.LPCB.LNKC, 0 },
+ Package() { 0x001fffff, 2, \_SB.PCI0.LPCB.LNKB, 0 },
+ Package() { 0x001fffff, 3, \_SB.PCI0.LPCB.LNKA, 0 },
+ // Serial IO 0:15.0
+ Package() { 0x0015ffff, 0, \_SB.PCI0.LPCB.LNKE, 0 },
+ Package() { 0x0015ffff, 1, \_SB.PCI0.LPCB.LNKF, 0 },
+ Package() { 0x0015ffff, 2, \_SB.PCI0.LPCB.LNKF, 0 },
+ Package() { 0x0015ffff, 3, \_SB.PCI0.LPCB.LNKF, 0 },
+ // SDIO 0:17.0
+ Package() { 0x0017ffff, 0, \_SB.PCI0.LPCB.LNKH, 0 },
+ })
+ }
+}
diff --git a/src/mainboard/google/slippy/acpi/platform.asl b/src/mainboard/google/slippy/acpi/platform.asl
new file mode 100644
index 0000000..1bd054d
--- /dev/null
+++ b/src/mainboard/google/slippy/acpi/platform.asl
@@ -0,0 +1,82 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* The APM port can be used for generating software SMIs */
+
+OperationRegion (APMP, SystemIO, 0xb2, 2)
+Field (APMP, ByteAcc, NoLock, Preserve)
+{
+ APMC, 8, // APM command
+ APMS, 8 // APM status
+}
+
+/* Port 80 POST */
+
+OperationRegion (POST, SystemIO, 0x80, 1)
+Field (POST, ByteAcc, Lock, Preserve)
+{
+ DBG0, 8
+}
+
+/* SMI I/O Trap */
+Method(TRAP, 1, Serialized)
+{
+ Store (Arg0, SMIF) // SMI Function
+ Store (0, TRP0) // Generate trap
+ Return (SMIF) // Return value of SMI handler
+}
+
+/* The _PIC method is called by the OS to choose between interrupt
+ * routing via the i8259 interrupt controller or the APIC.
+ *
+ * _PIC is called with a parameter of 0 for i8259 configuration and
+ * with a parameter of 1 for Local Apic/IOAPIC configuration.
+ */
+
+Method(_PIC, 1)
+{
+ // Remember the OS' IRQ routing choice.
+ Store(Arg0, PICM)
+}
+
+/* The _PTS method (Prepare To Sleep) is called before the OS is
+ * entering a sleep state. The sleep state number is passed in Arg0
+ */
+
+Method(_PTS,1)
+{
+}
+
+/* The _WAK method is called on system wakeup */
+
+Method(_WAK,1)
+{
+ /* Update AC status */
+ Store (\_SB.PCI0.LPCB.EC0.ACEX, Local0)
+ if (LNotEqual (Local0, \PWRS)) {
+ Store (Local0, \PWRS)
+ Notify (\_SB.PCI0.LPCB.EC0.AC, 0x80)
+ }
+
+ /* Update LID status */
+ Store (\_SB.PCI0.LPCB.EC0.LIDS, Local0)
+ if (LNotEqual (Local0, \LIDS)) {
+ Store (Local0, \LIDS)
+ Notify (\_SB.LID0, 0x80)
+ }
+
+ Return(Package(){0,0})
+}
diff --git a/src/mainboard/google/slippy/acpi/superio.asl b/src/mainboard/google/slippy/acpi/superio.asl
new file mode 100644
index 0000000..0460b2b
--- /dev/null
+++ b/src/mainboard/google/slippy/acpi/superio.asl
@@ -0,0 +1,25 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* mainboard configuration */
+#include "../ec.h"
+
+#define SIO_EC_MEMMAP_ENABLE // EC Memory Map Resources
+#define SIO_EC_HOST_ENABLE // EC Host Interface Resources
+#define SIO_EC_ENABLE_PS2K // Enable PS/2 Keyboard
+#define SIO_EC_ENABLE_COM1 // Enable Serial Port 1
+
+/* ACPI code for EC SuperIO functions */
+#include <ec/google/chromeec/acpi/superio.asl>
diff --git a/src/mainboard/google/slippy/acpi/thermal.asl b/src/mainboard/google/slippy/acpi/thermal.asl
new file mode 100644
index 0000000..36b0e21
--- /dev/null
+++ b/src/mainboard/google/slippy/acpi/thermal.asl
@@ -0,0 +1,132 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+// Thermal Zone
+
+Scope (\_TZ)
+{
+ // Handler for throttle requests on this platform
+ // 0 = Stop throttling
+ // 1 = Start throttling
+ Method (THRT, 1, Serialized)
+ {
+ If (LEqual (Arg0, 0)) {
+ /* Disable Power Limit */
+ \_SB.PCI0.MCHC.CTLD ()
+ } Else {
+ /* Enable Power Limit */
+ \_SB.PCI0.MCHC.CTLE (\F0PW)
+ }
+ }
+
+ ThermalZone (THRM)
+ {
+ Name (_TC1, 0x02)
+ Name (_TC2, 0x05)
+
+ // Thermal zone polling frequency: 10 seconds
+ Name (_TZP, 100)
+
+ // Thermal sampling period for passive cooling: 2 seconds
+ Name (_TSP, 20)
+
+ // Convert from Degrees C to 1/10 Kelvin for ACPI
+ Method (CTOK, 1) {
+ // 10th of Degrees C
+ Multiply (Arg0, 10, Local0)
+
+ // Convert to Kelvin
+ Add (Local0, 2732, Local0)
+
+ Return (Local0)
+ }
+
+ // Threshold for OS to shutdown
+ Method (_CRT, 0, Serialized)
+ {
+ Return (CTOK (\TCRT))
+ }
+
+ // Threshold for passive cooling
+ Method (_PSV, 0, Serialized)
+ {
+ Return (CTOK (\TPSV))
+ }
+
+ // Processors used for passive cooling
+ Method (_PSL, 0, Serialized)
+ {
+ Return (\PPKG ())
+ }
+
+ Method (TCHK, 0, Serialized)
+ {
+ // Get Temperature from TIN# set in NVS
+ Store (\_SB.PCI0.LPCB.EC0.TINS (TMPS), Local0)
+
+ // Check for sensor not calibrated
+ If (LEqual (Local0, \_SB.PCI0.LPCB.EC0.TNCA)) {
+ Return (CTOK(0))
+ }
+
+ // Check for sensor not present
+ If (LEqual (Local0, \_SB.PCI0.LPCB.EC0.TNPR)) {
+ Return (CTOK(0))
+ }
+
+ // Check for sensor not powered
+ If (LEqual (Local0, \_SB.PCI0.LPCB.EC0.TNOP)) {
+ Return (CTOK(0))
+ }
+
+ // Check for sensor bad reading
+ If (LEqual (Local0, \_SB.PCI0.LPCB.EC0.TBAD)) {
+ Return (CTOK(0))
+ }
+
+ // Adjust by offset to get Kelvin
+ Add (\_SB.PCI0.LPCB.EC0.TOFS, Local0, Local0)
+
+ // Convert to 1/10 Kelvin
+ Multiply (Local0, 10, Local0)
+ Return (Local0)
+ }
+
+ Method (_TMP, 0, Serialized)
+ {
+ // Get temperature from EC in deci-kelvin
+ Store (TCHK (), Local0)
+
+ // Critical temperature in deci-kelvin
+ Store (CTOK (\TCRT), Local1)
+
+ If (LGreaterEqual (Local0, Local1)) {
+ Store ("CRITICAL TEMPERATURE", Debug)
+ Store (Local0, Debug)
+
+ // Wait 1 second for EC to re-poll
+ Sleep (1000)
+
+ // Re-read temperature from EC
+ Store (TCHK (), Local0)
+
+ Store ("RE-READ TEMPERATURE", Debug)
+ Store (Local0, Debug)
+ }
+
+ Return (Local0)
+ }
+ }
+}
diff --git a/src/mainboard/google/slippy/acpi_tables.c b/src/mainboard/google/slippy/acpi_tables.c
new file mode 100644
index 0000000..97b246f
--- /dev/null
+++ b/src/mainboard/google/slippy/acpi_tables.c
@@ -0,0 +1,84 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <types.h>
+#include <string.h>
+#include <cbmem.h>
+#include <console/console.h>
+#include <arch/acpi.h>
+#include <arch/ioapic.h>
+#include <arch/acpigen.h>
+#include <arch/smp/mpspec.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/cpu.h>
+#include <cpu/x86/msr.h>
+#include <vendorcode/google/chromeos/gnvs.h>
+#include <ec/google/chromeec/ec.h>
+
+#include <southbridge/intel/lynxpoint/pch.h>
+#include <southbridge/intel/lynxpoint/nvs.h>
+#include "thermal.h"
+
+static void acpi_update_thermal_table(global_nvs_t *gnvs)
+{
+ gnvs->tmps = TEMPERATURE_SENSOR_ID;
+ gnvs->tcrt = CRITICAL_TEMPERATURE;
+ gnvs->tpsv = PASSIVE_TEMPERATURE;
+ gnvs->tmax = MAX_TEMPERATURE;
+ gnvs->f0pw = EC_THROTTLE_POWER_LIMIT;
+ gnvs->flvl = 1;
+}
+
+void acpi_create_gnvs(global_nvs_t *gnvs)
+{
+ /* Enable USB ports in S3 */
+ gnvs->s3u0 = 1;
+ gnvs->s3u1 = 1;
+
+ /* Disable USB ports in S5 */
+ gnvs->s5u0 = 0;
+ gnvs->s5u1 = 0;
+
+ /* TPM Present */
+ gnvs->tpmp = 1;
+
+
+#if CONFIG_CHROMEOS
+ gnvs->chromeos.vbt2 = google_ec_running_ro() ?
+ ACTIVE_ECFW_RO : ACTIVE_ECFW_RW;
+#endif
+
+ acpi_update_thermal_table(gnvs);
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ /* Local APICs */
+ current = acpi_create_madt_lapics(current);
+
+ /* IOAPIC */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+ 2, IO_APIC_ADDR, 0);
+
+ /* INT_SRC_OVR */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0);
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_HIGH);
+
+ return current;
+}
diff --git a/src/mainboard/google/slippy/board_info.txt b/src/mainboard/google/slippy/board_info.txt
new file mode 100644
index 0000000..4e2fd7d
--- /dev/null
+++ b/src/mainboard/google/slippy/board_info.txt
@@ -0,0 +1,7 @@
+Vendor name: Google
+Board name: Slippy Haswell Chromebook Reference device
+Category: laptop
+ROM package: SOIC-8
+ROM protocol: SPI
+ROM socketed: n
+Flashrom support: y
diff --git a/src/mainboard/google/slippy/chromeos.c b/src/mainboard/google/slippy/chromeos.c
new file mode 100644
index 0000000..22ec074
--- /dev/null
+++ b/src/mainboard/google/slippy/chromeos.c
@@ -0,0 +1,52 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <string.h>
+#include <bootmode.h>
+#include <southbridge/intel/lynxpoint/pch.h>
+#include <southbridge/intel/common/gpio.h>
+#include <vendorcode/google/chromeos/chromeos.h>
+
+#ifndef __PRE_RAM__
+#include <boot/coreboot_tables.h>
+
+void fill_lb_gpios(struct lb_gpios *gpios)
+{
+ struct lb_gpio chromeos_gpios[] = {
+ {58, ACTIVE_HIGH, 0, "write protect"},
+ {-1, ACTIVE_HIGH, get_recovery_mode_switch(), "recovery"},
+ {-1, ACTIVE_HIGH, get_developer_mode_switch(), "developer"},
+ {-1, ACTIVE_HIGH, get_lid_switch(), "lid"},
+ {-1, ACTIVE_HIGH, 0, "power"},
+ {-1, ACTIVE_HIGH, gfx_get_init_done(), "oprom"},
+ };
+ lb_add_gpios(gpios, chromeos_gpios, ARRAY_SIZE(chromeos_gpios));
+}
+#endif
+
+int get_write_protect_state(void)
+{
+ return get_gpio(58);
+}
+
+static const struct cros_gpio cros_gpios[] = {
+ CROS_GPIO_REC_AL(CROS_GPIO_VIRTUAL, CROS_GPIO_DEVICE_NAME),
+ CROS_GPIO_WP_AH(58, CROS_GPIO_DEVICE_NAME),
+};
+
+void mainboard_chromeos_acpi_generate(void)
+{
+ chromeos_acpi_gpio_generate(cros_gpios, ARRAY_SIZE(cros_gpios));
+}
diff --git a/src/mainboard/google/slippy/chromeos.fmd b/src/mainboard/google/slippy/chromeos.fmd
new file mode 100644
index 0000000..0c05ce9
--- /dev/null
+++ b/src/mainboard/google/slippy/chromeos.fmd
@@ -0,0 +1,38 @@
+FLASH at 0xff800000 0x800000 {
+ SI_ALL at 0x0 0x200000 {
+ SI_DESC at 0x0 0x1000
+ SI_ME at 0x1000 0x1ff000
+ }
+ SI_BIOS at 0x200000 0x600000 {
+ RW_SECTION_A at 0x0 0xf0000 {
+ VBLOCK_A at 0x0 0x10000
+ FW_MAIN_A(CBFS)@0x10000 0xdffc0
+ RW_FWID_A at 0xeffc0 0x40
+ }
+ RW_SECTION_B at 0xf0000 0xf0000 {
+ VBLOCK_B at 0x0 0x10000
+ FW_MAIN_B(CBFS)@0x10000 0xdffc0
+ RW_FWID_B at 0xeffc0 0x40
+ }
+ RW_MRC_CACHE at 0x1e0000 0x10000
+ RW_ELOG at 0x1f0000 0x4000
+ RW_SHARED at 0x1f4000 0x4000 {
+ SHARED_DATA at 0x0 0x2000
+ VBLOCK_DEV at 0x2000 0x2000
+ }
+ RW_VPD at 0x1f8000 0x2000
+ RW_UNUSED at 0x1fa000 0x6000
+ RW_LEGACY(CBFS)@0x200000 0x200000
+ WP_RO at 0x400000 0x200000 {
+ RO_VPD at 0x0 0x4000
+ RO_UNUSED at 0x4000 0xc000
+ RO_SECTION at 0x10000 0x1f0000 {
+ FMAP at 0x0 0x800
+ RO_FRID at 0x800 0x40
+ RO_FRID_PAD at 0x840 0x7c0
+ GBB at 0x1000 0x6f000
+ COREBOOT(CBFS)@0x70000 0x180000
+ }
+ }
+ }
+}
diff --git a/src/mainboard/google/slippy/cmos.layout b/src/mainboard/google/slippy/cmos.layout
new file mode 100644
index 0000000..b575e02
--- /dev/null
+++ b/src/mainboard/google/slippy/cmos.layout
@@ -0,0 +1,110 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007-2008 coresystems GmbH
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+# -----------------------------------------------------------------
+entries
+
+# -----------------------------------------------------------------
+# Status Register A
+# -----------------------------------------------------------------
+# Status Register B
+# -----------------------------------------------------------------
+# Status Register C
+#96 4 r 0 status_c_rsvd
+#100 1 r 0 uf_flag
+#101 1 r 0 af_flag
+#102 1 r 0 pf_flag
+#103 1 r 0 irqf_flag
+# -----------------------------------------------------------------
+# Status Register D
+#104 7 r 0 status_d_rsvd
+#111 1 r 0 valid_cmos_ram
+# -----------------------------------------------------------------
+# Diagnostic Status Register
+#112 8 r 0 diag_rsvd1
+
+# -----------------------------------------------------------------
+0 120 r 0 reserved_memory
+#120 264 r 0 unused
+
+# -----------------------------------------------------------------
+# RTC_BOOT_BYTE (coreboot hardcoded)
+384 1 e 4 boot_option
+388 4 h 0 reboot_counter
+#390 2 r 0 unused?
+
+# -----------------------------------------------------------------
+# coreboot config options: console
+392 3 e 5 baud_rate
+395 4 e 6 debug_level
+#399 1 r 0 unused
+
+# coreboot config options: cpu
+400 1 e 2 hyper_threading
+#401 7 r 0 unused
+
+# coreboot config options: southbridge
+408 1 e 1 nmi
+409 2 e 7 power_on_after_fail
+#411 5 r 0 unused
+
+# coreboot config options: bootloader
+#Used by ChromeOS:
+416 128 r 0 vbnv
+#544 440 r 0 unused
+
+# SandyBridge MRC Scrambler Seed values
+896 32 r 0 mrc_scrambler_seed
+928 32 r 0 mrc_scrambler_seed_s3
+
+# coreboot config options: check sums
+984 16 h 0 check_sum
+#1000 24 r 0 amd_reserved
+
+# -----------------------------------------------------------------
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 1 Emergency
+6 2 Alert
+6 3 Critical
+6 4 Error
+6 5 Warning
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Disable
+7 1 Enable
+7 2 Keep
+# -----------------------------------------------------------------
+checksums
+
+checksum 392 415 984
diff --git a/src/mainboard/google/slippy/dsdt.asl b/src/mainboard/google/slippy/dsdt.asl
new file mode 100644
index 0000000..56771c2
--- /dev/null
+++ b/src/mainboard/google/slippy/dsdt.asl
@@ -0,0 +1,67 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+DefinitionBlock(
+ "dsdt.aml",
+ "DSDT",
+ 0x02, // DSDT revision: ACPI v2.0
+ "COREv4", // OEM id
+ "COREBOOT", // OEM table id
+ 0x20110725 // OEM revision
+)
+{
+ // Some generic macros
+ #include "acpi/platform.asl"
+
+ // global NVS and variables
+ #include <southbridge/intel/lynxpoint/acpi/globalnvs.asl>
+
+ // General Purpose Events
+ //#include "acpi/gpe.asl"
+
+ // CPU
+ #include <cpu/intel/haswell/acpi/cpu.asl>
+
+ Scope (\_SB) {
+ Device (PCI0)
+ {
+ #include <northbridge/intel/haswell/acpi/haswell.asl>
+ #include <southbridge/intel/lynxpoint/acpi/pch.asl>
+
+ #include <drivers/intel/gma/acpi/default_brightness_levels.asl>
+ }
+ }
+
+ Scope (\_SB.PCI0.RP01)
+ {
+ Device (WLAN)
+ {
+ Name (_ADR, Zero)
+ }
+ }
+
+ // Mainboard specific
+ #include <variant/acpi/mainboard.asl>
+
+ // Thermal handler
+ #include "acpi/thermal.asl"
+
+ // Chrome OS specific
+ #include <vendorcode/google/chromeos/acpi/chromeos.asl>
+
+ // Chipset specific sleep states
+ #include <southbridge/intel/lynxpoint/acpi/sleepstates.asl>
+}
diff --git a/src/mainboard/google/slippy/ec.c b/src/mainboard/google/slippy/ec.c
new file mode 100644
index 0000000..c011f33
--- /dev/null
+++ b/src/mainboard/google/slippy/ec.c
@@ -0,0 +1,47 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/acpi.h>
+#include <types.h>
+#include <console/console.h>
+#include <ec/google/chromeec/ec.h>
+#include "ec.h"
+
+void mainboard_ec_init(void)
+{
+ printk(BIOS_DEBUG, "mainboard_ec_init\n");
+ post_code(0xf0);
+
+ /* Restore SCI event mask on resume. */
+ if (acpi_is_wakeup_s3()) {
+ google_chromeec_log_events(MAINBOARD_EC_LOG_EVENTS |
+ MAINBOARD_EC_S3_WAKE_EVENTS);
+
+ /* Disable SMI and wake events */
+ google_chromeec_set_smi_mask(0);
+
+ /* Clear pending events */
+ while (google_chromeec_get_event() != 0);
+ google_chromeec_set_sci_mask(MAINBOARD_EC_SCI_EVENTS);
+ } else {
+ google_chromeec_log_events(MAINBOARD_EC_LOG_EVENTS |
+ MAINBOARD_EC_S5_WAKE_EVENTS);
+ }
+
+ /* Clear wake events, these are enabled on entry to sleep */
+ google_chromeec_set_wake_mask(0);
+
+ post_code(0xf1);
+}
diff --git a/src/mainboard/google/slippy/ec.h b/src/mainboard/google/slippy/ec.h
new file mode 100644
index 0000000..22942ee
--- /dev/null
+++ b/src/mainboard/google/slippy/ec.h
@@ -0,0 +1,55 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef MAINBOARD_EC_H
+#define MAINBOARD_EC_H
+
+#include <ec/ec.h>
+#include <ec/google/chromeec/ec_commands.h>
+
+#define EC_SCI_GPI 36 /* GPIO36 is EC_SCI# */
+#define EC_SMI_GPI 34 /* GPIO34 is EC_SMI# */
+
+#define MAINBOARD_EC_SCI_EVENTS \
+ (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED) |\
+ EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\
+ EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_CONNECTED) |\
+ EC_HOST_EVENT_MASK(EC_HOST_EVENT_AC_DISCONNECTED) |\
+ EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_LOW) |\
+ EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_CRITICAL) |\
+ EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY) |\
+ EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_THRESHOLD) |\
+ EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_OVERLOAD) |\
+ EC_HOST_EVENT_MASK(EC_HOST_EVENT_USB_CHARGER))
+
+#define MAINBOARD_EC_SMI_EVENTS \
+ (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_CLOSED))
+
+/* EC can wake from S5 with lid or power button */
+#define MAINBOARD_EC_S5_WAKE_EVENTS \
+ (EC_HOST_EVENT_MASK(EC_HOST_EVENT_LID_OPEN) |\
+ EC_HOST_EVENT_MASK(EC_HOST_EVENT_POWER_BUTTON))
+
+/* EC can wake from S3 with lid or power button or key press */
+#define MAINBOARD_EC_S3_WAKE_EVENTS \
+ (MAINBOARD_EC_S5_WAKE_EVENTS |\
+ EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEY_PRESSED))
+
+/* Log EC wake events plus EC shutdown events */
+#define MAINBOARD_EC_LOG_EVENTS \
+ (EC_HOST_EVENT_MASK(EC_HOST_EVENT_THERMAL_SHUTDOWN) |\
+ EC_HOST_EVENT_MASK(EC_HOST_EVENT_BATTERY_SHUTDOWN))
+
+#endif
diff --git a/src/mainboard/google/slippy/fadt.c b/src/mainboard/google/slippy/fadt.c
new file mode 100644
index 0000000..2452ac2
--- /dev/null
+++ b/src/mainboard/google/slippy/fadt.c
@@ -0,0 +1,152 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <string.h>
+#include <device/pci.h>
+#include <arch/acpi.h>
+#include <cpu/x86/smm.h>
+#include <southbridge/intel/lynxpoint/pch.h>
+
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+ acpi_header_t *header = &(fadt->header);
+ u16 pmbase = get_pmbase();
+
+ memset((void *) fadt, 0, sizeof(acpi_fadt_t));
+ memcpy(header->signature, "FACP", 4);
+ header->length = sizeof(acpi_fadt_t);
+ header->revision = 3;
+ memcpy(header->oem_id, OEM_ID, 6);
+ memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8);
+ memcpy(header->asl_compiler_id, ASLC, 4);
+ header->asl_compiler_revision = 1;
+
+ fadt->firmware_ctrl = (unsigned long) facs;
+ fadt->dsdt = (unsigned long) dsdt;
+ fadt->model = 1;
+ fadt->preferred_pm_profile = PM_MOBILE;
+
+ fadt->sci_int = 0x9;
+ fadt->smi_cmd = APM_CNT;
+ fadt->acpi_enable = APM_CNT_ACPI_ENABLE;
+ fadt->acpi_disable = APM_CNT_ACPI_DISABLE;
+ fadt->s4bios_req = 0x0;
+ fadt->pstate_cnt = 0;
+
+ fadt->pm1a_evt_blk = pmbase;
+ fadt->pm1b_evt_blk = 0x0;
+ fadt->pm1a_cnt_blk = pmbase + 0x4;
+ fadt->pm1b_cnt_blk = 0x0;
+ fadt->pm2_cnt_blk = pmbase + 0x50;
+ fadt->pm_tmr_blk = pmbase + 0x8;
+ fadt->gpe0_blk = pmbase + 0x80;
+ fadt->gpe1_blk = 0;
+
+ fadt->pm1_evt_len = 4;
+ fadt->pm1_cnt_len = 2;
+ fadt->pm2_cnt_len = 1;
+ fadt->pm_tmr_len = 4;
+ fadt->gpe0_blk_len = 32;
+ fadt->gpe1_blk_len = 0;
+ fadt->gpe1_base = 0;
+ fadt->cst_cnt = 0;
+ fadt->p_lvl2_lat = 1;
+ fadt->p_lvl3_lat = 87;
+ fadt->flush_size = 1024;
+ fadt->flush_stride = 16;
+ fadt->duty_offset = 1;
+ fadt->duty_width = 0;
+ fadt->day_alrm = 0xd;
+ fadt->mon_alrm = 0x00;
+ fadt->century = 0x00;
+ fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042;
+
+ fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED |
+ ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON |
+ ACPI_FADT_RESET_REGISTER | ACPI_FADT_SEALED_CASE |
+ ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK;
+
+ fadt->reset_reg.space_id = 1;
+ fadt->reset_reg.bit_width = 8;
+ fadt->reset_reg.bit_offset = 0;
+ fadt->reset_reg.resv = 0;
+ fadt->reset_reg.addrl = 0xcf9;
+ fadt->reset_reg.addrh = 0;
+
+ fadt->reset_value = 6;
+ fadt->x_firmware_ctl_l = (unsigned long)facs;
+ fadt->x_firmware_ctl_h = 0;
+ fadt->x_dsdt_l = (unsigned long)dsdt;
+ fadt->x_dsdt_h = 0;
+
+ fadt->x_pm1a_evt_blk.space_id = 1;
+ fadt->x_pm1a_evt_blk.bit_width = 32;
+ fadt->x_pm1a_evt_blk.bit_offset = 0;
+ fadt->x_pm1a_evt_blk.resv = 0;
+ fadt->x_pm1a_evt_blk.addrl = pmbase;
+ fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_evt_blk.space_id = 1;
+ fadt->x_pm1b_evt_blk.bit_width = 0;
+ fadt->x_pm1b_evt_blk.bit_offset = 0;
+ fadt->x_pm1b_evt_blk.resv = 0;
+ fadt->x_pm1b_evt_blk.addrl = 0x0;
+ fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1a_cnt_blk.space_id = 1;
+ fadt->x_pm1a_cnt_blk.bit_width = 16;
+ fadt->x_pm1a_cnt_blk.bit_offset = 0;
+ fadt->x_pm1a_cnt_blk.resv = 0;
+ fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4;
+ fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_cnt_blk.space_id = 1;
+ fadt->x_pm1b_cnt_blk.bit_width = 0;
+ fadt->x_pm1b_cnt_blk.bit_offset = 0;
+ fadt->x_pm1b_cnt_blk.resv = 0;
+ fadt->x_pm1b_cnt_blk.addrl = 0x0;
+ fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm2_cnt_blk.space_id = 1;
+ fadt->x_pm2_cnt_blk.bit_width = 8;
+ fadt->x_pm2_cnt_blk.bit_offset = 0;
+ fadt->x_pm2_cnt_blk.resv = 0;
+ fadt->x_pm2_cnt_blk.addrl = pmbase + 0x50;
+ fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm_tmr_blk.space_id = 1;
+ fadt->x_pm_tmr_blk.bit_width = 32;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.resv = 0;
+ fadt->x_pm_tmr_blk.addrl = pmbase + 0x8;
+ fadt->x_pm_tmr_blk.addrh = 0x0;
+
+ fadt->x_gpe0_blk.space_id = 0;
+ fadt->x_gpe0_blk.bit_width = 0;
+ fadt->x_gpe0_blk.bit_offset = 0;
+ fadt->x_gpe0_blk.resv = 0;
+ fadt->x_gpe0_blk.addrl = 0;
+ fadt->x_gpe0_blk.addrh = 0x0;
+
+ fadt->x_gpe1_blk.space_id = 1;
+ fadt->x_gpe1_blk.bit_width = 0;
+ fadt->x_gpe1_blk.bit_offset = 0;
+ fadt->x_gpe1_blk.resv = 0;
+ fadt->x_gpe1_blk.addrl = 0x0;
+ fadt->x_gpe1_blk.addrh = 0x0;
+
+ header->checksum =
+ acpi_checksum((void *) fadt, header->length);
+}
diff --git a/src/mainboard/google/slippy/mainboard.c b/src/mainboard/google/slippy/mainboard.c
new file mode 100644
index 0000000..10252d8
--- /dev/null
+++ b/src/mainboard/google/slippy/mainboard.c
@@ -0,0 +1,97 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <types.h>
+#include <string.h>
+#include <smbios.h>
+#include <device/device.h>
+#include <device/device.h>
+#include <device/pci_def.h>
+#include <device/pci_ops.h>
+#include <console/console.h>
+#include <drivers/intel/gma/int15.h>
+#include <pc80/mc146818rtc.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <arch/interrupt.h>
+#include <boot/coreboot_tables.h>
+#include <southbridge/intel/lynxpoint/pch.h>
+#include <vendorcode/google/chromeos/chromeos.h>
+#include "ec.h"
+#include "onboard.h"
+
+void mainboard_suspend_resume(void)
+{
+ /* Call SMM finalize() handlers before resume */
+ outb(0xcb, 0xb2);
+}
+
+
+
+static void mainboard_init(device_t dev)
+{
+ mainboard_ec_init();
+}
+
+static int mainboard_smbios_data(device_t dev, int *handle,
+ unsigned long *current)
+{
+ int len = 0;
+
+ len += smbios_write_type41(
+ current, handle,
+ BOARD_LIGHTSENSOR_NAME, /* name */
+ BOARD_LIGHTSENSOR_IRQ, /* instance */
+ BOARD_LIGHTSENSOR_I2C_BUS, /* segment */
+ BOARD_LIGHTSENSOR_I2C_ADDR, /* bus */
+ 0, /* device */
+ 0); /* function */
+
+ len += smbios_write_type41(
+ current, handle,
+ BOARD_TRACKPAD_NAME, /* name */
+ BOARD_TRACKPAD_IRQ, /* instance */
+ BOARD_TRACKPAD_I2C_BUS, /* segment */
+ BOARD_TRACKPAD_I2C_ADDR, /* bus */
+ 0, /* device */
+ 0); /* function */
+
+ len += smbios_write_type41(
+ current, handle,
+ BOARD_TOUCHSCREEN_NAME, /* name */
+ BOARD_TOUCHSCREEN_IRQ, /* instance */
+ BOARD_TOUCHSCREEN_I2C_BUS, /* segment */
+ BOARD_TOUCHSCREEN_I2C_ADDR, /* bus */
+ 0, /* device */
+ 0); /* function */
+
+ return len;
+}
+
+// mainboard_enable is executed as first thing after
+// enumerate_buses().
+
+static void mainboard_enable(device_t dev)
+{
+ dev->ops->init = mainboard_init;
+ dev->ops->get_smbios_data = mainboard_smbios_data;
+ dev->ops->acpi_inject_dsdt_generator = chromeos_dsdt_generator;
+ install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_EDP, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, 0);
+}
+
+struct chip_operations mainboard_ops = {
+ .enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/google/slippy/onboard.h b/src/mainboard/google/slippy/onboard.h
new file mode 100644
index 0000000..9e1dc8b
--- /dev/null
+++ b/src/mainboard/google/slippy/onboard.h
@@ -0,0 +1,39 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef ONBOARD_H
+#define ONBOARD_H
+
+#define BOARD_LIGHTSENSOR_NAME "lightsensor"
+#define BOARD_LIGHTSENSOR_IRQ 51 /* PIRQT */
+#define BOARD_LIGHTSENSOR_I2C_BUS 2 /* I2C1 */
+#define BOARD_LIGHTSENSOR_I2C_ADDR 0x44
+
+#define BOARD_TRACKPAD_NAME "trackpad"
+#define BOARD_TRACKPAD_IRQ 37 /* PIRQV */
+#define BOARD_TRACKPAD_WAKE_GPIO 12 /* GPIO12 */
+#define BOARD_TRACKPAD_I2C_BUS 1 /* I2C0 */
+#define BOARD_TRACKPAD_I2C_ADDR 0x67
+
+#define BOARD_TOUCHSCREEN_NAME "touchscreen"
+#define BOARD_TOUCHSCREEN_IRQ 38 /* PIRQW */
+#define BOARD_TOUCHSCREEN_WAKE_GPIO 25 /* GPIO25 */
+#define BOARD_TOUCHSCREEN_I2C_BUS 2 /* I2C1 */
+#define BOARD_TOUCHSCREEN_I2C_ADDR 0x4a
+
+#define PEPPY_BOARD_VERSION_PROTO 0
+#define PEPPY_BOARD_VERSION_EVT 1
+
+#endif
diff --git a/src/mainboard/google/slippy/romstage.c b/src/mainboard/google/slippy/romstage.c
new file mode 100644
index 0000000..82931fc
--- /dev/null
+++ b/src/mainboard/google/slippy/romstage.c
@@ -0,0 +1,24 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <cpu/intel/haswell/haswell.h>
+#include "variant.h"
+
+
+void mainboard_romstage_entry(unsigned long bist)
+{
+ variant_romstage_entry(bist);
+}
diff --git a/src/mainboard/google/slippy/smihandler.c b/src/mainboard/google/slippy/smihandler.c
new file mode 100644
index 0000000..24f76f5
--- /dev/null
+++ b/src/mainboard/google/slippy/smihandler.c
@@ -0,0 +1,154 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <console/console.h>
+#include <cpu/x86/smm.h>
+#include <southbridge/intel/lynxpoint/nvs.h>
+#include <southbridge/intel/lynxpoint/pch.h>
+#include <southbridge/intel/common/gpio.h>
+#include <southbridge/intel/lynxpoint/me.h>
+#include <northbridge/intel/haswell/haswell.h>
+#include <cpu/intel/haswell/haswell.h>
+#include <elog.h>
+
+/* Include EC functions */
+#include <ec/google/chromeec/ec.h>
+#include "ec.h"
+
+/* Codec enable: GPIO45 */
+#define GPIO_PP3300_CODEC_EN 45
+/* GPIO46 controls the WLAN_DISABLE_L signal. */
+#define GPIO_WLAN_DISABLE_L 46
+#define GPIO_LTE_DISABLE_L 59
+
+static u8 mainboard_smi_ec(void)
+{
+ u8 cmd = google_chromeec_get_event();
+ u32 pm1_cnt;
+
+#if CONFIG_ELOG_GSMI
+ /* Log this event */
+ if (cmd)
+ elog_add_event_byte(ELOG_TYPE_EC_EVENT, cmd);
+#endif
+
+ switch (cmd) {
+ case EC_HOST_EVENT_LID_CLOSED:
+ printk(BIOS_DEBUG, "LID CLOSED, SHUTDOWN\n");
+
+ /* Go to S5 */
+ pm1_cnt = inl(get_pmbase() + PM1_CNT);
+ pm1_cnt |= (0xf << 10);
+ outl(pm1_cnt, get_pmbase() + PM1_CNT);
+ break;
+ }
+
+ return cmd;
+}
+
+/* gpi_sts is GPIO 47:32 */
+void mainboard_smi_gpi(u32 gpi_sts)
+{
+ if (gpi_sts & (1 << (EC_SMI_GPI - 32))) {
+ /* Process all pending events */
+ while (mainboard_smi_ec() != 0);
+ }
+}
+
+void mainboard_smi_sleep(u8 slp_typ)
+{
+ /* Disable USB charging if required */
+ switch (slp_typ) {
+ case ACPI_S3:
+ if (smm_get_gnvs()->s3u0 == 0)
+ google_chromeec_set_usb_charge_mode(
+ 0, USB_CHARGE_MODE_DISABLED);
+ if (smm_get_gnvs()->s3u1 == 0)
+ google_chromeec_set_usb_charge_mode(
+ 1, USB_CHARGE_MODE_DISABLED);
+
+ /* Prevent leak from standby rail to WLAN rail in S3. */
+ set_gpio(GPIO_WLAN_DISABLE_L, 0);
+ set_gpio(GPIO_PP3300_CODEC_EN, 0);
+ /* Disable LTE */
+ set_gpio(GPIO_LTE_DISABLE_L, 0);
+
+ /* Enable wake events */
+ google_chromeec_set_wake_mask(MAINBOARD_EC_S3_WAKE_EVENTS);
+ break;
+ case ACPI_S4:
+ case ACPI_S5:
+ if (smm_get_gnvs()->s5u0 == 0)
+ google_chromeec_set_usb_charge_mode(
+ 0, USB_CHARGE_MODE_DISABLED);
+ if (smm_get_gnvs()->s5u1 == 0)
+ google_chromeec_set_usb_charge_mode(
+ 1, USB_CHARGE_MODE_DISABLED);
+
+ /* Prevent leak from standby rail to WLAN rail in S5. */
+ set_gpio(GPIO_WLAN_DISABLE_L, 0);
+ set_gpio(GPIO_PP3300_CODEC_EN, 0);
+ /* Disable LTE */
+ set_gpio(GPIO_LTE_DISABLE_L, 0);
+
+ /* Enable wake events */
+ google_chromeec_set_wake_mask(MAINBOARD_EC_S5_WAKE_EVENTS);
+ break;
+ }
+
+ /* Disable SCI and SMI events */
+ google_chromeec_set_smi_mask(0);
+ google_chromeec_set_sci_mask(0);
+
+ /* Clear pending events that may trigger immediate wake */
+ while (google_chromeec_get_event() != 0);
+}
+
+
+static int mainboard_finalized = 0;
+
+int mainboard_smi_apmc(u8 apmc)
+{
+ switch (apmc) {
+ case APM_CNT_FINALIZE:
+ if (mainboard_finalized) {
+ printk(BIOS_DEBUG, "SMI#: Already finalized\n");
+ return 0;
+ }
+
+ intel_pch_finalize_smm();
+ intel_northbridge_haswell_finalize_smm();
+ intel_cpu_haswell_finalize_smm();
+
+ mainboard_finalized = 1;
+ break;
+ case APM_CNT_ACPI_ENABLE:
+ google_chromeec_set_smi_mask(0);
+ /* Clear all pending events */
+ while (google_chromeec_get_event() != 0);
+ google_chromeec_set_sci_mask(MAINBOARD_EC_SCI_EVENTS);
+ break;
+ case APM_CNT_ACPI_DISABLE:
+ google_chromeec_set_sci_mask(0);
+ /* Clear all pending events */
+ while (google_chromeec_get_event() != 0);
+ google_chromeec_set_smi_mask(MAINBOARD_EC_SMI_EVENTS);
+ break;
+ }
+ return 0;
+}
diff --git a/src/mainboard/google/slippy/thermal.h b/src/mainboard/google/slippy/thermal.h
new file mode 100644
index 0000000..a2f8e71
--- /dev/null
+++ b/src/mainboard/google/slippy/thermal.h
@@ -0,0 +1,33 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef THERMAL_H
+#define THERMAL_H
+
+#define TEMPERATURE_SENSOR_ID 0 /* PECI */
+
+/* Power level to set when EC requests throttle */
+#define EC_THROTTLE_POWER_LIMIT 12 /* 12W */
+
+/* Temperature which OS will shutdown at */
+#define CRITICAL_TEMPERATURE 99
+
+/* Temperature which OS will throttle CPU */
+#define PASSIVE_TEMPERATURE 95
+
+/* Tj_max value for calculating PECI CPU temperature */
+#define MAX_TEMPERATURE 100
+
+#endif
diff --git a/src/mainboard/google/slippy/variant.h b/src/mainboard/google/slippy/variant.h
new file mode 100644
index 0000000..fe8b5e1
--- /dev/null
+++ b/src/mainboard/google/slippy/variant.h
@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef VARIANT_H
+#define VARAINT_H
+
+void variant_romstage_entry(unsigned long bist);
+
+#endif
diff --git a/src/mainboard/google/slippy/variants/falco/Makefile.inc b/src/mainboard/google/slippy/variants/falco/Makefile.inc
new file mode 100644
index 0000000..aee33f9
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/falco/Makefile.inc
@@ -0,0 +1,43 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2012 Google Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += gma.c i915io.c
+
+## DIMM SPD for on-board memory
+SPD_BIN = $(obj)/spd.bin
+
+# Order of names in SPD_SOURCES is important!
+SPD_SOURCES = Micron_4KTF25664HZ # 4GB / CH0 + CH1 (RAM_ID=000)
+SPD_SOURCES += Hynix_HMT425S6AFR6A # 4GB / CH0 + CH1 (RAM_ID=001)
+SPD_SOURCES += Elpida_EDJ4216EFBG # 4GB / CH0 + CH1 (RAM_ID=010)
+SPD_SOURCES += Micron_4KTF25664HZ # 2GB / CH0 only (RAM_ID=011)
+SPD_SOURCES += Hynix_HMT425S6AFR6A # 2GB / CH0 only (RAM_ID=100)
+SPD_SOURCES += Elpida_EDJ4216EFBG # 2GB / CH0 only (RAM_ID=101)
+SPD_SOURCES += Samsung_M471B5674QH0 # 4GB / CH0 + CH1 (RAM_ID=110)
+SPD_SOURCES += Samsung_M471B5674QH0 # 2GB / CH0 only (RAM_ID=111)
+
+SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/spd/$(f).spd.hex)
+
+# Include spd ROM data
+$(SPD_BIN): $(SPD_DEPS)
+ for f in $+; \
+ do for c in $$(cat $$f | grep -v ^#); \
+ do printf $$(printf '\%o' 0x$$c); \
+ done; \
+ done > $@
+
+cbfs-files-y += spd.bin
+spd.bin-file := $(SPD_BIN)
+spd.bin-type := spd
diff --git a/src/mainboard/google/slippy/variants/falco/devicetree.cb b/src/mainboard/google/slippy/variants/falco/devicetree.cb
new file mode 100644
index 0000000..cdf47cf
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/falco/devicetree.cb
@@ -0,0 +1,125 @@
+chip northbridge/intel/haswell
+ # IGD Displays
+ register "gfx.ndid" = "3"
+ register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
+
+ # Enable eDP Hotplug with 6ms pulse
+ register "gpu_dp_d_hotplug" = "0x06"
+
+ # Disable DisplayPort C Hotplug
+ register "gpu_dp_c_hotplug" = "0x00"
+
+ # Enable HDMI Hotplug with 6ms pulse
+ register "gpu_dp_b_hotplug" = "0x06"
+
+ # Set backlight PWM values for eDP
+ register "gpu_cpu_backlight" = "0x00000200"
+ register "gpu_pch_backlight" = "0x04000000"
+
+ # Enable Panel and configure power delays
+ register "gpu_panel_port_select" = "1" # eDP
+ register "gpu_panel_power_cycle_delay" = "5" # 400ms (T4)
+ register "gpu_panel_power_up_delay" = "600" # 60ms (T1+T2)
+ register "gpu_panel_power_down_delay" = "600" # 60ms (T3+T7)
+ register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms (T5)
+ register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms (T6)
+
+ device cpu_cluster 0 on
+ chip cpu/intel/haswell
+ device lapic 0 on end
+ # Magic APIC ID to locate this chip
+ device lapic 0xACAC off end
+
+ register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E)
+ register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3)
+ register "c3_battery" = "9" # ACPI(C3) = MWAIT(C7S)
+
+ register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E)
+ register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3)
+ register "c3_acpower" = "9" # ACPI(C3) = MWAIT(C7S)
+ end
+ end
+
+ device domain 0 on
+ device pci 00.0 on end # host bridge
+ device pci 02.0 on end # vga controller
+ device pci 03.0 on end # mini-hd audio
+
+ chip southbridge/intel/lynxpoint
+ register "pirqa_routing" = "0x8b"
+ register "pirqb_routing" = "0x8a"
+ register "pirqc_routing" = "0x8b"
+ register "pirqd_routing" = "0x8b"
+ register "pirqe_routing" = "0x80"
+ register "pirqf_routing" = "0x80"
+ register "pirqg_routing" = "0x80"
+ register "pirqh_routing" = "0x80"
+
+ # EC range is 0x800-0x9ff
+ register "gen1_dec" = "0x00fc0801"
+ register "gen2_dec" = "0x00fc0901"
+
+ # EC_SMI is GPIO34
+ register "alt_gp_smi_en" = "0x0004"
+ register "gpe0_en_1" = "0x00000000"
+ # EC_SCI is GPIO36
+ register "gpe0_en_2" = "0x00000010"
+ register "gpe0_en_3" = "0x00000000"
+ register "gpe0_en_4" = "0x00000000"
+
+ register "ide_legacy_combined" = "0x0"
+ register "sata_ahci" = "0x1"
+ register "sata_port_map" = "0x1"
+
+ register "sio_acpi_mode" = "1"
+ register "sio_i2c0_voltage" = "0" # 3.3V
+ register "sio_i2c1_voltage" = "0" # 3.3V
+
+ # Force enable ASPM for PCIe Port 1
+ register "pcie_port_force_aspm" = "0x01"
+
+ # Route all USB ports to XHCI per default
+ register "xhci_default" = "1"
+
+ # Disable PCIe CLKOUT 1-5 and CLKOUT_XDP
+ register "icc_clock_disable" = "0x013e0000"
+
+ device pci 13.0 off end # Smart Sound Audio DSP
+ device pci 14.0 on end # USB3 XHCI
+ device pci 15.0 on end # Serial I/O DMA
+ device pci 15.1 on end # I2C0
+ device pci 15.2 on end # I2C1
+ device pci 15.3 off end # GSPI0
+ device pci 15.4 off end # GSPI1
+ device pci 15.5 off end # UART0
+ device pci 15.6 off end # UART1
+ device pci 16.0 on end # Management Engine Interface 1
+ device pci 16.1 off end # Management Engine Interface 2
+ device pci 16.2 off end # Management Engine IDE-R
+ device pci 16.3 off end # Management Engine KT
+ device pci 17.0 off end # SDIO
+ device pci 19.0 off end # GbE
+ device pci 1b.0 on end # High Definition Audio
+ device pci 1c.0 on end # PCIe Port #1
+ device pci 1c.1 off end # PCIe Port #2
+ device pci 1c.2 off end # PCIe Port #3
+ device pci 1c.3 off end # PCIe Port #4
+ device pci 1c.4 off end # PCIe Port #5
+ device pci 1c.5 off end # PCIe Port #6
+ device pci 1d.0 on end # USB2 EHCI
+ device pci 1e.0 off end # PCI bridge
+ device pci 1f.0 on
+ chip ec/google/chromeec
+ # We only have one init function that
+ # we need to call to initialize the
+ # keyboard part of the EC.
+ device pnp ff.1 on # dummy address
+ end
+ end
+ end # LPC bridge
+ device pci 1f.2 on end # SATA Controller
+ device pci 1f.3 on end # SMBus
+ device pci 1f.6 on end # Thermal
+ end
+ end
+end
diff --git a/src/mainboard/google/slippy/variants/falco/gma.c b/src/mainboard/google/slippy/variants/falco/gma.c
new file mode 100644
index 0000000..19f467c
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/falco/gma.c
@@ -0,0 +1,246 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <types.h>
+#include <string.h>
+#include <stdlib.h>
+#include <device/device.h>
+#include <device/device.h>
+#include <device/pci_def.h>
+#include <device/pci_ops.h>
+#include <console/console.h>
+#include <delay.h>
+#include <pc80/mc146818rtc.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <arch/interrupt.h>
+#include <boot/coreboot_tables.h>
+#include <smbios.h>
+#include <device/pci.h>
+#include <ec/google/chromeec/ec.h>
+
+#include <cpu/x86/tsc.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/mtrr.h>
+#include <cpu/x86/msr.h>
+#include <edid.h>
+#include <drivers/intel/gma/i915.h>
+#include <northbridge/intel/haswell/haswell.h>
+#include <variant/mainboard.h>
+
+/*
+ * Here is the rough outline of how we bring up the display:
+ * 1. Upon power-on Sink generates a hot plug detection pulse thru HPD
+ * 2. Source determines video mode by reading DPCD receiver capability field
+ * (DPCD 00000h to 0000Dh) including eDP CP capability register (DPCD
+ * 0000Dh).
+ * 3. Sink replies DPCD receiver capability field.
+ * 4. Source starts EDID read thru I2C-over-AUX.
+ * 5. Sink replies EDID thru I2C-over-AUX.
+ * 6. Source determines link configuration, such as MAX_LINK_RATE and
+ * MAX_LANE_COUNT. Source also determines which type of eDP Authentication
+ * method to use and writes DPCD link configuration field (DPCD 00100h to
+ * 0010Ah) including eDP configuration set (DPCD 0010Ah).
+ * 7. Source starts link training. Sink does clock recovery and equalization.
+ * 8. Source reads DPCD link status field (DPCD 00200h to 0020Bh).
+ * 9. Sink replies DPCD link status field. If main link is not stable, Source
+ * repeats Step 7.
+ * 10. Source sends MSA (Main Stream Attribute) data. Sink extracts video
+ * parameters and recovers stream clock.
+ * 11. Source sends video data.
+ */
+
+/* how many bytes do we need for the framebuffer?
+ * Well, this gets messy. To get an exact answer, we have
+ * to ask the panel, but we'd rather zero the memory
+ * and set up the gtt while the panel powers up. So,
+ * we take a reasonable guess, secure in the knowledge that the
+ * MRC has to overestimate the number of bytes used.
+ * 8 MiB is a very safe guess. There may be a better way later, but
+ * fact is, the initial framebuffer is only very temporary. And taking
+ * a little long is ok; this is done much faster than the AUX
+ * channel is ready for IO.
+ */
+#define FRAME_BUFFER_BYTES (8*MiB)
+/* how many 4096-byte pages do we need for the framebuffer?
+ * There are hard ways to get this, and easy ways:
+ * there are FRAME_BUFFER_BYTES/4096 pages, since pages are 4096
+ * on this chip (and in fact every Intel graphics chip we've seen).
+ */
+#define FRAME_BUFFER_PAGES (FRAME_BUFFER_BYTES/(4096))
+
+static int i915_init_done = 0;
+
+/* fill the palette. */
+static void palette(void)
+{
+ int i;
+ unsigned long color = 0;
+
+ for(i = 0; i < 256; i++, color += 0x010101){
+ gtt_write(_LGC_PALETTE_A + (i << 2),color);
+ }
+}
+
+void mainboard_train_link(struct intel_dp *intel_dp)
+{
+ u8 read_val;
+ u8 link_status[DP_LINK_STATUS_SIZE];
+
+ gtt_write(DP_TP_CTL(intel_dp->port),DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE);
+ gtt_write(DP_A, DP_PORT_EN | DP_LINK_TRAIN_PAT_1 | DP_LINK_TRAIN_PAT_1_CPT | DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0 | DP_PORT_WIDTH_1 | DP_PLL_FREQ_270MHZ | DP_SYNC_VS_HIGH |0x80000011);
+
+ intel_dp_get_training_pattern(intel_dp, &read_val);
+ intel_dp_set_training_pattern(intel_dp, DP_TRAINING_PATTERN_1 | DP_LINK_QUAL_PATTERN_DISABLE | DP_SYMBOL_ERROR_COUNT_BOTH);
+ intel_dp_get_lane_count(intel_dp, &read_val);
+ intel_dp_set_training_lane0(intel_dp, DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0);
+ intel_dp_get_link_status(intel_dp, link_status);
+
+ gtt_write(DP_TP_CTL(intel_dp->port),DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE | DP_TP_CTL_LINK_TRAIN_PAT2);
+
+ intel_dp_get_training_pattern(intel_dp, &read_val);
+ intel_dp_set_training_pattern(intel_dp, DP_TRAINING_PATTERN_2 | DP_LINK_QUAL_PATTERN_DISABLE | DP_SYMBOL_ERROR_COUNT_BOTH);
+ intel_dp_get_link_status(intel_dp, link_status);
+ intel_dp_get_lane_align_status(intel_dp, &read_val);
+ intel_dp_get_training_pattern(intel_dp, &read_val);
+ intel_dp_set_training_pattern(intel_dp, DP_TRAINING_PATTERN_DISABLE | DP_LINK_QUAL_PATTERN_DISABLE | DP_SYMBOL_ERROR_COUNT_BOTH);
+}
+
+#define TEST_GFX 0
+
+#if TEST_GFX
+static void test_gfx(struct intel_dp *dp)
+{
+ int i;
+
+ /* This is a sanity test code which fills the screen with two bands --
+ green and blue. It is very useful to ensure all the initializations
+ are made right. Thus, to be used only for testing, not otherwise
+ */
+ for (i = 0; i < (dp->edid.va - 4); i++) {
+ u32 *l;
+ int j;
+ u32 tcolor = 0x0ff;
+ for (j = 0; j < (dp->edid.ha-4); j++) {
+ if (j == (dp->edid.ha/2)) {
+ tcolor = 0xff00;
+ }
+ l = (u32*)(graphics + i * dp->stride + j * sizeof(tcolor));
+ memcpy(l,&tcolor,sizeof(tcolor));
+ }
+ }
+}
+#else
+static void test_gfx(struct intel_dp *dp) {}
+#endif
+
+
+void mainboard_set_port_clk_dp(struct intel_dp *intel_dp)
+{
+ u32 ddi_pll_sel = 0;
+
+ switch (intel_dp->link_bw) {
+ case DP_LINK_BW_1_62:
+ ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
+ break;
+ case DP_LINK_BW_2_7:
+ ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
+ break;
+ case DP_LINK_BW_5_4:
+ ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
+ break;
+ default:
+ printk(BIOS_ERR, "invalid link bw %d\n", intel_dp->link_bw);
+ return;
+ }
+
+ gtt_write(PORT_CLK_SEL(intel_dp->port), ddi_pll_sel);
+}
+
+int panel_lightup(struct intel_dp *dp, unsigned int init_fb)
+{
+ int i;
+ int edid_ok;
+ int pixels = FRAME_BUFFER_BYTES/64;
+
+ void runio(struct intel_dp *dp);
+
+ dp->gen = 8; // This is gen 8 which we believe is Haswell
+ dp->is_haswell = 1;
+ dp->DP = 0x2;
+ /* These values are used for training the link */
+ dp->lane_count = 2;
+ dp->link_bw = DP_LINK_BW_2_7;
+ dp->pipe = PIPE_A;
+ dp->port = PORT_A;
+ dp->plane = PLANE_A;
+ dp->clock = 160000;
+ dp->pipe_bits_per_pixel = 32;
+ dp->type = INTEL_OUTPUT_EDP;
+ dp->output_reg = DP_A;
+ /* observed from YABEL. */
+ dp->aux_clock_divider = 0xe1;
+ dp->precharge = 3;
+
+ /* 1. Normal mode: Set the first page to zero and make
+ all GTT entries point to the same page
+ 2. Developer/Recovery mode: We do not zero out all
+ the pages pointed to by GTT in order to avoid wasting time */
+ if (init_fb){
+ set_translation_table(0, FRAME_BUFFER_PAGES, dp->physbase, 4096);
+ memset((void *)dp->graphics, 0x55, FRAME_BUFFER_PAGES*4096);
+ } else {
+ set_translation_table(0, FRAME_BUFFER_PAGES, dp->physbase, 0);
+ memset((void*)dp->graphics, 0, 4096);
+ }
+
+ dp->address = 0x50;
+
+ if ( !intel_dp_get_dpcd(dp) )
+ goto fail;
+
+ intel_dp_i2c_aux_ch(dp, MODE_I2C_WRITE, 0, NULL);
+ for(dp->edidlen = i = 0; i < sizeof(dp->rawedid); i++){
+ if (intel_dp_i2c_aux_ch(dp, MODE_I2C_READ,
+ 0x50, &dp->rawedid[i]) < 0)
+ break;
+ dp->edidlen++;
+ }
+
+ edid_ok = decode_edid(dp->rawedid, dp->edidlen, &dp->edid);
+ printk(BIOS_SPEW, "decode edid returns %d\n", edid_ok);
+
+ compute_display_params(dp);
+
+ intel_ddi_set_pipe_settings(dp);
+
+ runio(dp);
+
+ palette();
+
+ pixels = dp->edid.mode.ha * (dp->edid.mode.va-4) * 4;
+ printk(BIOS_SPEW, "ha=%d, va=%d\n",dp->edid.mode.ha, dp->edid.mode.va);
+
+ test_gfx(dp);
+
+ set_vbe_mode_info_valid(&dp->edid, (uintptr_t)dp->graphics);
+ i915_init_done = 1;
+ return i915_init_done;
+
+fail:
+ printk(BIOS_SPEW, "Graphics could not be started;");
+ printk(BIOS_SPEW, "Returning.\n");
+ return 0;
+}
diff --git a/src/mainboard/google/slippy/variants/falco/hda_verb.c b/src/mainboard/google/slippy/variants/falco/hda_verb.c
new file mode 100644
index 0000000..790d501
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/falco/hda_verb.c
@@ -0,0 +1,103 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <device/azalia_device.h>
+
+const u32 cim_verb_data[] = {
+ /* coreboot specific header */
+ 0x10ec0283, // Codec Vendor / Device ID: Realtek ALC283
+ 0x10ec0283, // Subsystem ID
+ 0x0000000e, // Number of jacks (NID entries)
+
+ 0x0017ff00, // Function Reset
+ 0x0017ff00, // Double Function Reset
+ 0x000F0000, // Pad - get vendor id
+ 0x000F0002, // Pad - get revision id
+
+ /* NID 0x01, HDA Codec Subsystem ID Verb Table */
+ AZALIA_SUBVENDOR(0x0, 0x11790670),
+
+ /* Pin Widget Verb Table */
+
+ /* Pin Complex (NID 0x12) DMIC - interior mobile lid */
+ AZALIA_PIN_CFG(0x0, 0x12, 0xb7a61010),
+
+ /* Pin Complex (NID 0x14) SPKR-OUT PORTD */
+ // group 1, front left/right
+ // no connector, no jack detect
+ // speaker out, analog
+ // fixed function, internal
+ AZALIA_PIN_CFG(0x0, 0x14, 0x90170110),
+
+ /* Pin Complex (NID 0x17) MONO Out - Disabled */
+ AZALIA_PIN_CFG(0x0, 0x17, 0x411111f0),
+
+ /* Pin Complex (NID 0x18) MIC1 PORTB - Disabled */
+ AZALIA_PIN_CFG(0x0, 0x18, 0x411111f0),
+
+ /* Pin Complex (NID 0x19) MIC2 PORTF */
+ // group 1, cap 1
+ // black, jack detect
+ // mic in, analog
+ // connector, left panel
+ AZALIA_PIN_CFG(0x0, 0x19, 0x03a71011),
+
+ /* Pin Complex (NID 0x1A) LINE1 PORTC - Disabled */
+ AZALIA_PIN_CFG(0x0, 0x1a, 0x411111f0),
+
+ /* Pin Complex (NID 0x1B) LINE2 PORTE - Disabled */
+ AZALIA_PIN_CFG(0x0, 0x1a, 0x411111f0),
+
+ /* Pin Complex (NID 0x1d) PCBeep */
+ // eapd low on ex-amp, laptop, custom enable
+ // mute spkr on hpout
+ // pcbeep en able, checksum
+ // no physical, internal
+ AZALIA_PIN_CFG(0x0, 0x1d, 0x4015812d),
+
+ /* Pin Complex (NID 0x1E) SPDIF-OUT - Disabled */
+ AZALIA_PIN_CFG(0x0, 0x1e, 0x411111f0),
+
+ /* Pin Complex (NID 0x21) HPOUT PORT-I */
+ // group1,
+ // black, jack detect
+ // HPOut, 1/8 stereo
+ // connector, left panel
+ AZALIA_PIN_CFG(0x0, 0x21, 0x0321101f),
+
+ /* Undocumented settings from Realtek (needed for beep_gen) */
+ /* Widget node 0x20 */
+ 0x02050010,
+ 0x02040c20,
+ 0x0205001b,
+ 0x0204081b,
+
+ /* Tuned jack detection */
+ 0x02050043,
+ 0x0204A614,
+ 0x02050047,
+ 0x02049470,
+};
+
+const u32 pc_beep_verbs[] = {
+ 0x00170500, /* power up everything (codec, dac, adc, mixers) */
+ 0x01470740, /* enable speaker out */
+ 0x01470c02, /* set speaker EAPD pin */
+ 0x0143b01f, /* unmute speaker */
+ 0x00c37100, /* unmute mixer nid 0xc input 1 */
+ 0x00b37410, /* unmute mixer nid 0xb beep input and set volume */
+};
+
+AZALIA_ARRAY_SIZES;
diff --git a/src/mainboard/google/slippy/variants/falco/i915io.c b/src/mainboard/google/slippy/variants/falco/i915io.c
new file mode 100644
index 0000000..d51cb43
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/falco/i915io.c
@@ -0,0 +1,125 @@
+/*
+* This file is part of the coreboot project.
+*
+* Copyright 2013 Google Inc.
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; version 2 of the License.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+
+/* This code was originally generated using an i915tool program. It has been
+ * improved by hand.
+ */
+
+#include <stdint.h>
+#include <console/console.h>
+#include <delay.h>
+#include <drivers/intel/gma/i915.h>
+#include <arch/io.h>
+#include <variant/mainboard.h>
+
+/* this function will either be renamed or subsumed into ./gma.c:i915_lightup */
+void runio(struct intel_dp *dp);
+
+void runio(struct intel_dp *dp)
+{
+ u8 read_val;
+
+ intel_dp_wait_panel_power_control(0xabcd0008);
+
+ /* vbios spins at this point. Some haswell weirdness? */
+ intel_dp_wait_panel_power_control(0xabcd0008);
+
+ /* This should be a function like intel_panel_enable_backlight
+ However, we are not sure how the value 0x3a9 comes up.
+ It has to do something with PWM frequency */
+ gtt_write(BLC_PWM_CPU_CTL,0x03a903a9);
+ gtt_write(BLC_PWM_PCH_CTL2,0x03a903a9);
+ gtt_write(BLC_PWM_PCH_CTL1,BLM_PCH_PWM_ENABLE);
+
+ gtt_write(DEIIR,0x00008000);
+ intel_dp_wait_reg(DEIIR, 0x00000000);
+
+ gtt_write(DSPSTRIDE(dp->plane),dp->stride);
+
+ intel_dp_sink_dpms(dp, 0);
+
+ intel_dp_get_max_downspread(dp, &read_val);
+
+ intel_dp_set_m_n_regs(dp);
+
+ intel_dp_set_resolution(dp);
+
+ gtt_write(PIPESRC(dp->pipe),dp->pipesrc);
+ gtt_write(PIPECONF(dp->transcoder),0x00000000);
+ gtt_write(PCH_TRANSCONF(dp->pipe),0x00000000);
+
+ mainboard_set_port_clk_dp(dp);
+ gtt_write(DSPSTRIDE(dp->plane),dp->stride);
+ gtt_write(DSPCNTR(dp->plane),DISPLAY_PLANE_ENABLE|DISPPLANE_BGRX888);
+ gtt_write(DEIIR,0x00000080);
+
+ gtt_write(TRANS_DDI_FUNC_CTL_EDP,dp->flags);
+ gtt_write(PIPECONF(dp->transcoder),PIPECONF_ENABLE|PIPECONF_DITHER_EN);
+
+ intel_dp_wait_panel_power_control(0xabcd000a);
+
+ /* what is this doing? Not sure yet. */
+ intel_dp_i2c_write(dp, 0x0);
+ intel_dp_i2c_read(dp, &read_val);
+ intel_dp_i2c_write(dp, 0x04);
+ intel_dp_i2c_read(dp, &read_val);
+ intel_dp_i2c_write(dp, 0x7e);
+ intel_dp_i2c_read(dp, &read_val);
+
+ /* this needs to be a call to a function */
+ gtt_write(DP_A, DP_LINK_TRAIN_PAT_1 | DP_LINK_TRAIN_PAT_1_CPT | DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0 | DP_PORT_WIDTH_1 | DP_PLL_FREQ_270MHZ | DP_SCRAMBLING_DISABLE_IRONLAKE | DP_SYNC_VS_HIGH |0x00000091);
+ gtt_write(DP_TP_CTL(dp->port),DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE);
+ gtt_write(DP_A, DP_PORT_EN | DP_LINK_TRAIN_PAT_1 | DP_LINK_TRAIN_PAT_1_CPT | DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0 | DP_PORT_WIDTH_1 | DP_ENHANCED_FRAMING | DP_PLL_FREQ_270MHZ | DP_SCRAMBLING_DISABLE_IRONLAKE | DP_SYNC_VS_HIGH |0x80040091);
+
+ /* we may need to move these *after* power well power up and *before* PCH_PP_CONTROL in gma.c */
+ gtt_write(PCH_PP_ON_DELAYS, PANEL_PORT_SELECT_LVDS |(/* PANEL_POWER_UP_DELAY_MASK */0x1 << 16)|(/* PANEL_LIGHT_ON_DELAY_MASK */0xa << 0)|0x0001000a);
+ gtt_write(PCH_PP_ON_DELAYS, PANEL_PORT_SELECT_LVDS |(/* PANEL_POWER_UP_DELAY_MASK */0x7d0 << 16)|(/* PANEL_LIGHT_ON_DELAY_MASK */0xa << 0)|0x07d0000a);
+
+ intel_dp_set_bw(dp);
+ intel_dp_set_lane_count(dp);
+
+ mainboard_train_link(dp);
+
+ /* need a function: intel_ddi_set_tp or similar */
+ gtt_write(DP_TP_CTL(dp->port),DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE | DP_TP_CTL_LINK_TRAIN_IDLE);
+ gtt_write(DP_TP_CTL(dp->port),DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE | DP_TP_CTL_LINK_TRAIN_NORMAL);
+
+ gtt_write(BLC_PWM_CPU_CTL,0x03a903a9);
+ gtt_write(BLC_PWM_PCH_CTL2,0x03a903a9);
+ gtt_write(BLC_PWM_PCH_CTL1,0x80000000);
+
+ /* some of this is not needed. */
+ gtt_write(DIGITAL_PORT_HOTPLUG_CNTRL, DIGITAL_PORTA_HOTPLUG_ENABLE );
+
+ gtt_write(SDEIIR,0x00000000);
+ gtt_write(DEIIR,0x00000000);
+ gtt_write(DEIIR,0x00008000);
+ intel_dp_wait_reg(DEIIR, 0x00000000);
+
+ gtt_write(DSPSTRIDE(dp->plane),dp->stride);
+ gtt_write(PIPESRC(dp->pipe),dp->pipesrc);
+
+ gtt_write(DEIIR,0x00000080);
+ intel_dp_wait_reg(DEIIR, 0x00000000);
+
+ gtt_write(DSPSTRIDE(dp->plane),dp->stride);
+ gtt_write(DSPCNTR(dp->plane),DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888);
+
+ gtt_write(PCH_PP_CONTROL,EDP_BLC_ENABLE | PANEL_POWER_RESET | PANEL_POWER_ON);
+
+ gtt_write(SDEIIR,0x00000000);
+ gtt_write(SDEIIR,0x00000000);
+ gtt_write(DEIIR,0x00000000);
+}
diff --git a/src/mainboard/google/slippy/variants/falco/include/variant/acpi/mainboard.asl b/src/mainboard/google/slippy/variants/falco/include/variant/acpi/mainboard.asl
new file mode 100644
index 0000000..417dbfe
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/falco/include/variant/acpi/mainboard.asl
@@ -0,0 +1,84 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <onboard.h>
+
+Scope (\_SB)
+{
+ Device (LID0)
+ {
+ Name(_HID, EisaId("PNP0C0D"))
+ Method(_LID, 0)
+ {
+ Store (\_SB.PCI0.LPCB.EC0.LIDS, \LIDS)
+ Return (\LIDS)
+ }
+ }
+
+ Device (PWRB)
+ {
+ Name(_HID, EisaId("PNP0C0C"))
+ }
+}
+
+Scope (\_SB.PCI0.I2C0)
+{
+ Device (CTPA)
+ {
+ Name (_HID, "CYAP0000")
+ Name (_DDN, "Cypress Touchpad")
+ Name (_UID, 3)
+ Name (ISTP, 1) // Touchpad
+
+ Name (_CRS, ResourceTemplate()
+ {
+ I2cSerialBus (
+ 0x67, // SlaveAddress
+ ControllerInitiated, // SlaveMode
+ 400000, // ConnectionSpeed
+ AddressingMode7Bit, // AddressingMode
+ "\\_SB.PCI0.I2C0" // ResourceSource
+ )
+ Interrupt (ResourceConsumer, Edge, ActiveLow)
+ {
+ BOARD_TRACKPAD_IRQ
+ }
+ })
+
+ Method (_STA)
+ {
+ If (LEqual (\S1EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ Name (_PRW, Package() { BOARD_TRACKPAD_WAKE_GPIO, 0x3 })
+
+ Method (_DSW, 3, NotSerialized)
+ {
+ Store (BOARD_TRACKPAD_WAKE_GPIO, Local0)
+ If (LEqual (Arg0, 1)) {
+ // Enable GPIO as wake source
+ \_SB.PCI0.LPCB.GWAK (Local0)
+ }
+ }
+
+ // Allow device to power off in S0
+ Name (_S0W, 4)
+ }
+}
diff --git a/src/mainboard/google/slippy/variants/falco/include/variant/gpio.h b/src/mainboard/google/slippy/variants/falco/include/variant/gpio.h
new file mode 100644
index 0000000..c35b81e
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/falco/include/variant/gpio.h
@@ -0,0 +1,120 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef FALCO_GPIO_H
+#define FALCO_GPIO_H
+
+struct pch_lp_gpio_map;
+
+const struct pch_lp_gpio_map mainboard_gpio_map[] = {
+ LP_GPIO_UNUSED, /* 0: UNUSED */
+ LP_GPIO_UNUSED, /* 1: UNUSED */
+ LP_GPIO_UNUSED, /* 2: UNUSED */
+ LP_GPIO_UNUSED, /* 3: UNUSED */
+ LP_GPIO_NATIVE, /* 4: NATIVE: I2C0_SDA_GPIO4 */
+ LP_GPIO_NATIVE, /* 5: NATIVE: I2C0_SCL_GPIO5 */
+ LP_GPIO_NATIVE, /* 6: NATIVE: I2C1_SDA_GPIO6 */
+ LP_GPIO_NATIVE, /* 7: NATIVE: I2C1_SCL_GPIO7 */
+ LP_GPIO_ACPI_SCI, /* 8: LTE_WAKE_L_Q */
+ LP_GPIO_INPUT, /* 9: RAM_ID1 */
+ LP_GPIO_ACPI_SCI, /* 10: WLAN_WAKE_L_Q */
+ LP_GPIO_UNUSED, /* 11: UNUSED */
+ LP_GPIO_INPUT_INVERT, /* 12: TRACKPAD_INT_L (WAKE) */
+ LP_GPIO_INPUT, /* 13: RAM_ID0 */
+ LP_GPIO_INPUT, /* 14: EC_IN_RW */
+ LP_GPIO_UNUSED, /* 15: UNUSED (STRAP) */
+ LP_GPIO_UNUSED, /* 16: UNUSED */
+ LP_GPIO_UNUSED, /* 17: UNUSED */
+ LP_GPIO_NATIVE, /* 18: PCIE_CLKREQ_WLAN# */
+ LP_GPIO_UNUSED, /* 19: UNUSED */
+ LP_GPIO_UNUSED, /* 20: UNUSED */
+ LP_GPIO_UNUSED, /* 21: UNUSED */
+ LP_GPIO_UNUSED, /* 22: UNUSED */
+ LP_GPIO_UNUSED, /* 23: UNUSED */
+ LP_GPIO_UNUSED, /* 24: UNUSED */
+ LP_GPIO_INPUT_INVERT, /* 25: TOUCH_INT_L (WAKE) */
+ LP_GPIO_UNUSED, /* 26: UNUSED */
+ LP_GPIO_UNUSED, /* 27: UNUSED */
+ LP_GPIO_UNUSED, /* 28: UNUSED */
+ LP_GPIO_UNUSED, /* 29: UNUSED */
+ LP_GPIO_NATIVE, /* 30: NATIVE: PCH_SUSWARN_L */
+ LP_GPIO_NATIVE, /* 31: NATIVE: ACPRESENT */
+ LP_GPIO_NATIVE, /* 32: NATIVE: LPC_CLKRUN_L */
+ LP_GPIO_NATIVE, /* 33: NATIVE: DEVSLP0 */
+ LP_GPIO_ACPI_SMI, /* 34: EC_SMI_L */
+ LP_GPIO_ACPI_SMI, /* 35: PCH_NMI_DBG_L (route in NMI_EN) */
+ LP_GPIO_ACPI_SCI, /* 36: EC_SCI_L */
+ LP_GPIO_UNUSED, /* 37: UNUSED */
+ LP_GPIO_UNUSED, /* 38: UNUSED */
+ LP_GPIO_UNUSED, /* 39: UNUSED */
+ LP_GPIO_NATIVE, /* 40: NATIVE: USB_OC0# */
+ LP_GPIO_UNUSED, /* 41: UNUSED */
+ LP_GPIO_UNUSED, /* 42: UNUSED */
+ LP_GPIO_NATIVE, /* 43: NATIVE: USB_OC3# */
+ LP_GPIO_UNUSED, /* 44: UNUSED */
+ LP_GPIO_UNUSED, /* 45: UNUSED */
+ LP_GPIO_OUT_HIGH, /* 46: WLAN_DISABLE_L */
+ LP_GPIO_INPUT, /* 47: RAM_ID2 */
+ LP_GPIO_UNUSED, /* 48: UNUSED */
+ LP_GPIO_UNUSED, /* 49: UNUSED */
+ LP_GPIO_UNUSED, /* 50: UNUSED */
+ LP_GPIO_INPUT, /* 51: ALS_INT_L */
+ LP_GPIO_INPUT, /* 52: SIM_DET */
+ LP_GPIO_PIRQ, /* 53: TRACKPAD_INT_DX (PIRQV) */
+ LP_GPIO_PIRQ, /* 54: TOUCH_INT_L_DX (PIRQW) */
+ LP_GPIO_UNUSED, /* 55: UNUSED */
+ LP_GPIO_UNUSED, /* 56: UNUSED */
+ LP_GPIO_UNUSED, /* 57: UNUSED */
+ LP_GPIO_INPUT, /* 58: PCH_SPI_WP_D */
+ LP_GPIO_OUT_HIGH, /* 59: LTE_DISABLE_L */
+ LP_GPIO_NATIVE, /* 60: NATIVE: SML0ALERT */
+ LP_GPIO_UNUSED, /* 61: UNUSED */
+ LP_GPIO_UNUSED, /* 62: UNUSED */
+ LP_GPIO_NATIVE, /* 63: NATIVE: PCH_SLP_S5_L */
+ LP_GPIO_UNUSED, /* 64: UNUSED */
+ LP_GPIO_UNUSED, /* 65: UNUSED */
+ LP_GPIO_UNUSED, /* 66: UNUSED (STRAP) */
+ LP_GPIO_UNUSED, /* 67: UNUSED */
+ LP_GPIO_UNUSED, /* 68: UNUSED */
+ LP_GPIO_UNUSED, /* 69: UNUSED */
+ LP_GPIO_UNUSED, /* 70: UNUSED */
+ LP_GPIO_NATIVE, /* 71: NATIVE: MODPHY_EN */
+ LP_GPIO_UNUSED, /* 72: UNUSED */
+ LP_GPIO_UNUSED, /* 73: UNUSED */
+ LP_GPIO_NATIVE, /* 74: NATIVE: SMB_ME1_DAT */
+ LP_GPIO_NATIVE, /* 75: NATIVE: SMB_ME1_CLK */
+ LP_GPIO_UNUSED, /* 76: UNUSED */
+ LP_GPIO_UNUSED, /* 77: UNUSED */
+ LP_GPIO_UNUSED, /* 78: UNUSED */
+ LP_GPIO_UNUSED, /* 79: UNUSED */
+ LP_GPIO_UNUSED, /* 80: UNUSED */
+ LP_GPIO_NATIVE, /* 81: NATIVE: SPKR */
+ LP_GPIO_NATIVE, /* 82: NATIVE: EC_RCIN_L */
+ LP_GPIO_UNUSED, /* 83: UNUSED */
+ LP_GPIO_UNUSED, /* 84: UNUSED */
+ LP_GPIO_UNUSED, /* 85: UNUSED */
+ LP_GPIO_UNUSED, /* 86: UNUSED (STRAP) */
+ LP_GPIO_UNUSED, /* 87: UNUSED */
+ LP_GPIO_UNUSED, /* 88: UNUSED */
+ LP_GPIO_UNUSED, /* 89: UNUSED */
+ LP_GPIO_UNUSED, /* 90: UNUSED */
+ LP_GPIO_UNUSED, /* 91: UNUSED */
+ LP_GPIO_UNUSED, /* 92: UNUSED */
+ LP_GPIO_UNUSED, /* 93: UNUSED */
+ LP_GPIO_UNUSED, /* 94: UNUSED */
+ LP_GPIO_END
+};
+
+#endif
diff --git a/src/mainboard/google/slippy/variants/falco/include/variant/mainboard.h b/src/mainboard/google/slippy/variants/falco/include/variant/mainboard.h
new file mode 100644
index 0000000..6329a27
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/falco/include/variant/mainboard.h
@@ -0,0 +1,21 @@
+/*
+* This file is part of the coreboot project.
+*
+* Copyright 2013 Google Inc.
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; version 2 of the License.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+
+#ifndef __MAINBOARD_H_
+#define __MAINBOARD_H_
+void mainboard_train_link(struct intel_dp *intel_dp);
+void mainboard_set_port_clk_dp(struct intel_dp *intel_dp);
+
+#endif
diff --git a/src/mainboard/google/slippy/variants/falco/romstage.c b/src/mainboard/google/slippy/variants/falco/romstage.c
new file mode 100644
index 0000000..8254bc2
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/falco/romstage.c
@@ -0,0 +1,175 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <cbfs.h>
+#include <console/console.h>
+#include <cpu/intel/haswell/haswell.h>
+#include <northbridge/intel/haswell/haswell.h>
+#include <northbridge/intel/haswell/raminit.h>
+#include <southbridge/intel/lynxpoint/pch.h>
+#include <southbridge/intel/lynxpoint/lp_gpio.h>
+#include <variant/gpio.h>
+#include "../../variant.h"
+
+const struct rcba_config_instruction rcba_config[] = {
+
+ /*
+ * GFX INTA -> PIRQA (MSI)
+ * D28IP_P1IP PCIE INTA -> PIRQA
+ * D29IP_E1P EHCI INTA -> PIRQD
+ * D20IP_XHCI XHCI INTA -> PIRQC (MSI)
+ * D31IP_SIP SATA INTA -> PIRQF (MSI)
+ * D31IP_SMIP SMBUS INTB -> PIRQG
+ * D31IP_TTIP THRT INTC -> PIRQA
+ * D27IP_ZIP HDA INTA -> PIRQG (MSI)
+ */
+
+ /* Device interrupt pin register (board specific) */
+ RCBA_SET_REG_32(D31IP, (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
+ (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)),
+ RCBA_SET_REG_32(D29IP, (INTA << D29IP_E1P)),
+ RCBA_SET_REG_32(D28IP, (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) |
+ (INTB << D28IP_P4IP)),
+ RCBA_SET_REG_32(D27IP, (INTA << D27IP_ZIP)),
+ RCBA_SET_REG_32(D26IP, (INTA << D26IP_E2P)),
+ RCBA_SET_REG_32(D22IP, (NOINT << D22IP_MEI1IP)),
+ RCBA_SET_REG_32(D20IP, (INTA << D20IP_XHCI)),
+
+ /* Device interrupt route registers */
+ RCBA_SET_REG_32(D31IR, DIR_ROUTE(PIRQG, PIRQC, PIRQB, PIRQA)),/* LPC */
+ RCBA_SET_REG_32(D29IR, DIR_ROUTE(PIRQD, PIRQD, PIRQD, PIRQD)),/* EHCI */
+ RCBA_SET_REG_32(D28IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),/* PCIE */
+ RCBA_SET_REG_32(D27IR, DIR_ROUTE(PIRQG, PIRQG, PIRQG, PIRQG)),/* HDA */
+ RCBA_SET_REG_32(D22IR, DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA)),/* ME */
+ RCBA_SET_REG_32(D21IR, DIR_ROUTE(PIRQE, PIRQF, PIRQF, PIRQF)),/* SIO */
+ RCBA_SET_REG_32(D20IR, DIR_ROUTE(PIRQC, PIRQC, PIRQC, PIRQC)),/* XHCI */
+ RCBA_SET_REG_32(D23IR, DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH)),/* SDIO */
+
+ /* Disable unused devices (board specific) */
+ RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS),
+
+ RCBA_END_CONFIG,
+};
+
+/* Copy SPD data for on-board memory */
+static void copy_spd(struct pei_data *peid)
+{
+ const int gpio_vector[] = {13, 9, 47, -1};
+ int spd_index = get_gpios(gpio_vector);
+ char *spd_file;
+ size_t spd_file_len;
+
+ printk(BIOS_DEBUG, "SPD index %d\n", spd_index);
+ spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD,
+ &spd_file_len);
+ if (!spd_file)
+ die("SPD data not found.");
+
+ if (spd_file_len <
+ ((spd_index + 1) * sizeof(peid->spd_data[0]))) {
+ printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n");
+ spd_index = 0;
+ }
+
+ if (spd_file_len < sizeof(peid->spd_data[0]))
+ die("Missing SPD data.");
+
+ /* Index 0-2,6 are 4GB config with both CH0 and CH1
+ * Index 3-5,7 are 2GB config with CH0 only
+ */
+ switch (spd_index) {
+ case 3: case 4: case 5: case 7:
+ peid->dimm_channel1_disabled = 3;
+ }
+
+ memcpy(peid->spd_data[0],
+ spd_file +
+ spd_index * sizeof(peid->spd_data[0]),
+ sizeof(peid->spd_data[0]));
+}
+
+void variant_romstage_entry(unsigned long bist)
+{
+ struct pei_data pei_data = {
+ .pei_version = PEI_VERSION,
+ .mchbar = (uintptr_t)DEFAULT_MCHBAR,
+ .dmibar = (uintptr_t)DEFAULT_DMIBAR,
+ .epbar = DEFAULT_EPBAR,
+ .pciexbar = DEFAULT_PCIEXBAR,
+ .smbusbar = SMBUS_IO_BASE,
+ .wdbbar = 0x4000000,
+ .wdbsize = 0x1000,
+ .hpet_address = HPET_ADDR,
+ .rcba = (uintptr_t)DEFAULT_RCBA,
+ .pmbase = DEFAULT_PMBASE,
+ .gpiobase = DEFAULT_GPIOBASE,
+ .temp_mmio_base = 0xfed08000,
+ .system_type = 5, /* ULT */
+ .tseg_size = CONFIG_SMM_TSEG_SIZE,
+ .spd_addresses = { 0xff, 0x00, 0xff, 0x00 },
+ .ec_present = 1,
+ // 0 = leave channel enabled
+ // 1 = disable dimm 0 on channel
+ // 2 = disable dimm 1 on channel
+ // 3 = disable dimm 0+1 on channel
+ .dimm_channel0_disabled = 2,
+ .dimm_channel1_disabled = 2,
+ // Enable 2x refresh mode
+ .ddr_refresh_2x = 1,
+ .max_ddr3_freq = 1600,
+ .usb_xhci_on_resume = 1,
+ .usb2_ports = {
+ /* Length, Enable, OCn#, Location */
+ { 0x0064, 1, 0, /* P0: Port A, CN8 */
+ USB_PORT_BACK_PANEL },
+ { 0x0052, 1, 0, /* P1: Port B, CN9 */
+ USB_PORT_BACK_PANEL },
+ { 0x0040, 1, USB_OC_PIN_SKIP, /* P2: CCD */
+ USB_PORT_INTERNAL },
+ { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */
+ USB_PORT_INTERNAL },
+ { 0x0040, 1, USB_OC_PIN_SKIP, /* P4: LTE */
+ USB_PORT_INTERNAL },
+ { 0x0040, 1, USB_OC_PIN_SKIP, /* P5: TOUCH */
+ USB_PORT_INTERNAL },
+ { 0x0040, 1, USB_OC_PIN_SKIP, /* P6: SD Card */
+ USB_PORT_INTERNAL },
+ { 0x0123, 1, 3, /* P7: USB2 Port */
+ USB_PORT_INTERNAL },
+ },
+ .usb3_ports = {
+ /* Enable, OCn# */
+ { 1, 0 }, /* P1; Port A, CN8 */
+ { 1, 0 }, /* P2; Port B, CN9 */
+ { 0, USB_OC_PIN_SKIP }, /* P3; */
+ { 0, USB_OC_PIN_SKIP }, /* P4; */
+ },
+ };
+
+ struct romstage_params romstage_params = {
+ .pei_data = &pei_data,
+ .gpio_map = &mainboard_gpio_map,
+ .rcba_config = &rcba_config[0],
+ .bist = bist,
+ .copy_spd = copy_spd,
+ };
+
+ /* Call into the real romstage main with this board's attributes. */
+ romstage_common(&romstage_params);
+}
diff --git a/src/mainboard/google/slippy/variants/falco/spd/Elpida_EDJ4216EFBG.spd.hex b/src/mainboard/google/slippy/variants/falco/spd/Elpida_EDJ4216EFBG.spd.hex
new file mode 100644
index 0000000..eb41f0b
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/falco/spd/Elpida_EDJ4216EFBG.spd.hex
@@ -0,0 +1,17 @@
+# Elpida EDJ4216EFBG-GN-F
+92 12 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00
+69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 81
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 02 FE 00 00 00 00 00 00 00 A1 CE
+45 44 4A 34 32 31 36 45 46 42 47 2D 47 4E 2D 46
+00 00 00 00 02 FE 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
diff --git a/src/mainboard/google/slippy/variants/falco/spd/Hynix_HMT425S6AFR6A.spd.hex b/src/mainboard/google/slippy/variants/falco/spd/Hynix_HMT425S6AFR6A.spd.hex
new file mode 100644
index 0000000..7b09327
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/falco/spd/Hynix_HMT425S6AFR6A.spd.hex
@@ -0,0 +1,17 @@
+# Hynix HMT425S6AFR6A-PBA
+92 12 0B 03 04 19 02 02 03 52 01 08 0A 00 FE 00
+69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 01
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 0F 11 62 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 80 AD 01 00 00 00 00 00 00 FF AB
+48 4D 54 34 32 35 53 36 41 46 52 36 41 2D 50 42
+20 20 4E 30 80 AD 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
diff --git a/src/mainboard/google/slippy/variants/falco/spd/Micron_4KTF25664HZ.spd.hex b/src/mainboard/google/slippy/variants/falco/spd/Micron_4KTF25664HZ.spd.hex
new file mode 100644
index 0000000..cbe9e4f
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/falco/spd/Micron_4KTF25664HZ.spd.hex
@@ -0,0 +1,17 @@
+# Micron 4KTF25664HZ-1G6E1
+92 11 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00
+69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 05
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 0F 01 02 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 80 2C 00 00 00 00 00 00 00 AD 75
+34 4B 54 46 32 35 36 36 34 48 5A 2D 31 47 36 45
+31 20 45 31 80 2C 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
diff --git a/src/mainboard/google/slippy/variants/falco/spd/Samsung_M471B5674QH0.spd.hex b/src/mainboard/google/slippy/variants/falco/spd/Samsung_M471B5674QH0.spd.hex
new file mode 100644
index 0000000..c2a23cd
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/falco/spd/Samsung_M471B5674QH0.spd.hex
@@ -0,0 +1,17 @@
+# Samsung M471B5674QH0-YK0 (K4B4G1646Q)
+92 12 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00
+69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 01
+00 00 00 00 00 00 00 00 00 88 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 0F 01 11 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 80 CE 01 00 00 00 00 00 00 6C F9
+4D 34 37 31 42 35 36 37 34 51 48 30 2D 59 4B 30
+20 20 00 00 80 CE 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
diff --git a/src/mainboard/google/slippy/variants/leon/Makefile.inc b/src/mainboard/google/slippy/variants/leon/Makefile.inc
new file mode 100644
index 0000000..5d8d9d3
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/leon/Makefile.inc
@@ -0,0 +1,40 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2012 Google Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+## DIMM SPD for on-board memory
+SPD_BIN = $(obj)/spd.bin
+
+# Order of names in SPD_SOURCES is important!
+SPD_SOURCES = Micron_4KTF25664HZ # 0: 4GB / CH0 + CH1
+SPD_SOURCES += Hynix_HMT425S6AFR6A # 1: 4GB / CH0 + CH1
+SPD_SOURCES += Samsung_K4B4G1646Q # 2: 4GB / CH0 + Ch1
+SPD_SOURCES += Micron_4KTF25664HZ # 3: space holder
+SPD_SOURCES += Micron_4KTF25664HZ # 4: space holder
+SPD_SOURCES += Hynix_HMT425S6AFR6A # 5: 2GB / CH0
+SPD_SOURCES += Samsung_K4B4G1646Q # 6: 2GB / CH0
+
+SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/spd/$(f).spd.hex)
+
+# Include spd ROM data
+$(SPD_BIN): $(SPD_DEPS)
+ for f in $+; \
+ do for c in $$(cat $$f | grep -v ^#); \
+ do printf $$(printf '\%o' 0x$$c); \
+ done; \
+ done > $@
+
+cbfs-files-y += spd.bin
+spd.bin-file := $(SPD_BIN)
+spd.bin-type := spd
diff --git a/src/mainboard/google/slippy/variants/leon/devicetree.cb b/src/mainboard/google/slippy/variants/leon/devicetree.cb
new file mode 100644
index 0000000..b0edb7f
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/leon/devicetree.cb
@@ -0,0 +1,157 @@
+chip northbridge/intel/haswell
+ # IGD Displays
+ register "gfx.ndid" = "3"
+ register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
+
+ # Enable eDP Hotplug with 6ms pulse
+ register "gpu_dp_d_hotplug" = "0x06"
+
+ # Disable DisplayPort C Hotplug
+ register "gpu_dp_c_hotplug" = "0x00"
+
+ # Enable HDMI Hotplug with 6ms pulse
+ register "gpu_dp_b_hotplug" = "0x06"
+
+ # Set backlight PWM values for eDP
+ register "gpu_cpu_backlight" = "0x00000200"
+ register "gpu_pch_backlight" = "0x04000000"
+
+ # Enable Panel and configure power delays
+ register "gpu_panel_port_select" = "1" # eDP
+ register "gpu_panel_power_cycle_delay" = "5" # 400ms
+ register "gpu_panel_power_up_delay" = "400" # 40ms
+ register "gpu_panel_power_down_delay" = "150" # 15ms
+ register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms
+ register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms
+
+ device cpu_cluster 0 on
+ chip cpu/intel/haswell
+ device lapic 0 on end
+ # Magic APIC ID to locate this chip
+ device lapic 0xACAC off end
+
+ register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E)
+ register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3)
+ register "c3_battery" = "9" # ACPI(C3) = MWAIT(C7S)
+
+ register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E)
+ register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3)
+ register "c3_acpower" = "9" # ACPI(C3) = MWAIT(C7S)
+ end
+ end
+
+ device domain 0 on
+ device pci 00.0 on end # host bridge
+ device pci 02.0 on end # vga controller
+ device pci 03.0 on end # mini-hd audio
+
+ chip southbridge/intel/lynxpoint
+ register "pirqa_routing" = "0x8b"
+ register "pirqb_routing" = "0x8a"
+ register "pirqc_routing" = "0x8b"
+ register "pirqd_routing" = "0x8b"
+ register "pirqe_routing" = "0x80"
+ register "pirqf_routing" = "0x80"
+ register "pirqg_routing" = "0x80"
+ register "pirqh_routing" = "0x80"
+
+ # EC range is 0x800-0x9ff
+ register "gen1_dec" = "0x00fc0801"
+ register "gen2_dec" = "0x00fc0901"
+
+ # EC_SMI is GPIO34
+ register "alt_gp_smi_en" = "0x0004"
+ register "gpe0_en_1" = "0x00000000"
+ # EC_SCI is GPIO36
+ register "gpe0_en_2" = "0x00000010"
+ register "gpe0_en_3" = "0x00000000"
+ register "gpe0_en_4" = "0x00000000"
+
+ register "ide_legacy_combined" = "0x0"
+ register "sata_ahci" = "0x1"
+ register "sata_port_map" = "0x1"
+ register "sata_devslp_disable" = "0x1"
+
+ # DTLE DATA / EDGE values
+ register "sata_port0_gen3_dtle" = "0x5"
+ register "sata_port1_gen3_dtle" = "0x5"
+
+ register "sio_acpi_mode" = "1"
+ register "sio_i2c0_voltage" = "0" # 3.3V
+ register "sio_i2c1_voltage" = "0" # 3.3V
+
+ # Force enable ASPM for PCIe Port 1
+ register "pcie_port_force_aspm" = "0x01"
+
+ # Route all USB ports to XHCI per default
+ register "xhci_default" = "1"
+
+ # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP
+ register "icc_clock_disable" = "0x013c0000"
+
+ device pci 13.0 off end # Smart Sound Audio DSP
+ device pci 14.0 on end # USB3 XHCI
+ device pci 15.0 on end # Serial I/O DMA
+ device pci 15.1 on end # I2C0
+ device pci 15.2 on end # I2C1
+ device pci 15.3 off end # GSPI0
+ device pci 15.4 off end # GSPI1
+ device pci 15.5 off end # UART0
+ device pci 15.6 off end # UART1
+ device pci 16.0 on end # Management Engine Interface 1
+ device pci 16.1 off end # Management Engine Interface 2
+ device pci 16.2 off end # Management Engine IDE-R
+ device pci 16.3 off end # Management Engine KT
+ device pci 17.0 off end # SDIO
+ device pci 19.0 off end # GbE
+ device pci 1b.0 on end # High Definition Audio
+ device pci 1c.0 on end # PCIe Port #1
+ device pci 1c.1 off end # PCIe Port #2
+ device pci 1c.2 off end # PCIe Port #3
+ device pci 1c.3 off end # PCIe Port #4
+ device pci 1c.4 off end # PCIe Port #5
+ device pci 1c.5 off end # PCIe Port #6
+ device pci 1d.0 on end # USB2 EHCI
+ device pci 1e.0 off end # PCI bridge
+ device pci 1f.0 on
+ chip ec/google/chromeec
+ # We only have one init function that
+ # we need to call to initialize the
+ # keyboard part of the EC.
+ device pnp ff.1 on # dummy address
+ end
+ end
+ end # LPC bridge
+ device pci 1f.2 on end # SATA Controller
+ device pci 1f.3 on # SMBus
+ chip drivers/i2c/rtd2132
+ # Panel Power Timings (1 ms units)
+ # Note: the panel Tx timings are very
+ # different from the LVDS bridge
+ # Tx timing settings. Below is a mapping
+ # for RTD2132 -> Panel timings.
+ # T1 = T2
+ # T2 = T8 + T10 + T12
+ # T3 = T14
+ # T4 = T15
+ # T5 = T9 + T11 + T13
+ # T6 = T3
+ # T7 = T4
+ register "t1" = "0x14"
+ register "t2" = "0xdc"
+ register "t3" = "0x0e"
+ register "t4" = "0x02"
+ register "t5" = "0xdc"
+ register "t6" = "0x14"
+ register "t7" = "0x208"
+ # LVDS Swap settings are normal.
+ register "lvds_swap" = "0"
+ # Enable Spread Sprectrum at 0.5%
+ register "sscg_percent" = "0x05"
+ device i2c 35 on end # (8bit address: 0x6A)
+ end # rtd2132
+ end # SMBus
+ device pci 1f.6 on end # Thermal
+ end
+ end
+end
diff --git a/src/mainboard/google/slippy/variants/leon/hda_verb.c b/src/mainboard/google/slippy/variants/leon/hda_verb.c
new file mode 100644
index 0000000..39a5c78
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/leon/hda_verb.c
@@ -0,0 +1,103 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <device/azalia_device.h>
+
+const u32 cim_verb_data[] = {
+ /* coreboot specific header */
+ 0x10ec0283, // Codec Vendor / Device ID: Realtek ALC283
+ 0x10ec0283, // Subsystem ID
+ 0x0000000e, // Number of jacks (NID entries)
+
+ 0x0017ff00, // Function Reset
+ 0x0017ff00, // Double Function Reset
+ 0x000F0000, // Pad - get vendor id
+ 0x000F0002, // Pad - get revision id
+
+ /* NID 0x01, HDA Codec Subsystem ID Verb Table */
+ AZALIA_SUBVENDOR(0x0, 0x11790670),
+
+ /* Pin Widget Verb Table */
+
+ /* Pin Complex (NID 0x12) DMIC - Internal Mic */
+ AZALIA_PIN_CFG(0x0, 0x12, 0xb7a61010),
+
+ /* Pin Complex (NID 0x14) SPKR-OUT - Internal Speakers */
+ // group 1, cap 0
+ // no connector, no jack detect
+ // speaker out, analog
+ // fixed function, internal
+ AZALIA_PIN_CFG(0x0, 0x14, 0x90170110),
+
+ /* Pin Complex (NID 0x17) MONO Out - Disabled */
+ AZALIA_PIN_CFG(0x0, 0x17, 0x411111f0),
+
+ /* Pin Complex (NID 0x18) MIC1 PORTB - Disabled */
+ AZALIA_PIN_CFG(0x0, 0x18, 0x411111f0),
+
+ /* Pin Complex (NID 0x19) MIC2 - 3.5mm Jack */
+ // group2, cap 0
+ // black, jack detect
+ // Mic in, 3.5mm Jack
+ // connector, External left panel
+ AZALIA_PIN_CFG(0x0, 0x19, 0x03a11020),
+
+ /* Pin Complex (NID 0x1A) LINE1 - Disabled */
+ AZALIA_PIN_CFG(0x0, 0x1a, 0x411111f0),
+
+ /* Pin Complex (NID 0x1B) LINE2 - Disabled */
+ AZALIA_PIN_CFG(0x0, 0x1b, 0x411111f0),
+
+ /* Pin Complex (NID 0x1D) PCBeep */
+ // eapd low on ex-amp, laptop, custom enable
+ // mute spkr on hpout
+ // pcbeep en able, checksum
+ // no physical, Internal, Location N/A
+ AZALIA_PIN_CFG(0x0, 0x1d, 0x4015812d),
+
+ /* Pin Complex (NID 0x1E) SPDIF-OUT - Disabled*/
+ AZALIA_PIN_CFG(0x0, 0x1e, 0x411111f0),
+
+ /* Pin Complex (NID 0x21) HP-OUT - 3.5mm Jack*/
+ // group2, cap 1
+ // black, jack detect
+ // HPOut, 3.5mm Jack
+ // connector, left panel
+ AZALIA_PIN_CFG(0x0, 0x21, 0x03211021),
+
+ /* Undocumented settings from Realtek (needed for beep_gen) */
+ /* Widget node 0x20 */
+ 0x02050010,
+ 0x02040c20,
+ 0x0205001b,
+ 0x0204081b,
+
+ /* Tuned jack detection */
+ 0x02050043,
+ 0x0204A614,
+ 0x02050047,
+ 0x02049470,
+};
+
+const u32 pc_beep_verbs[] = {
+ 0x00170500, /* power up everything (codec, dac, adc, mixers) */
+ 0x01470740, /* enable speaker out */
+ 0x01470c02, /* set speaker EAPD pin */
+ 0x0143b01f, /* unmute speaker */
+ 0x00c37100, /* unmute mixer nid 0xc input 1 */
+ 0x00b37410, /* unmute mixer nid 0xb beep input and set volume */
+};
+
+AZALIA_ARRAY_SIZES;
diff --git a/src/mainboard/google/slippy/variants/leon/include/variant/acpi/mainboard.asl b/src/mainboard/google/slippy/variants/leon/include/variant/acpi/mainboard.asl
new file mode 100644
index 0000000..4afe310
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/leon/include/variant/acpi/mainboard.asl
@@ -0,0 +1,88 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <onboard.h>
+
+Scope (\_SB)
+{
+ Device (LID0)
+ {
+ Name(_HID, EisaId("PNP0C0D"))
+ Method(_LID, 0)
+ {
+ Store (\_SB.PCI0.LPCB.EC0.LIDS, \LIDS)
+ Return (\LIDS)
+ }
+
+ // There is no GPIO for LID, the EC pulses WAKE# pin instead.
+ // There is no GPE for WAKE#, so fake it with PCI_EXP_WAKE
+ Name (_PRW, Package(){ 0x69, 5 }) // PCI_EXP
+ }
+
+ Device (PWRB)
+ {
+ Name(_HID, EisaId("PNP0C0C"))
+ }
+}
+
+Scope (\_SB.PCI0.I2C0)
+{
+ Device (CTPA)
+ {
+ Name (_HID, "CYAP0000")
+ Name (_DDN, "Cypress Touchpad")
+ Name (_UID, 3)
+ Name (ISTP, 1) /* Touchpad */
+
+ Name (_CRS, ResourceTemplate()
+ {
+ I2cSerialBus (
+ 0x67, // SlaveAddress
+ ControllerInitiated, // SlaveMode
+ 400000, // ConnectionSpeed
+ AddressingMode7Bit, // AddressingMode
+ "\\_SB.PCI0.I2C0" // ResourceSource
+ )
+ Interrupt (ResourceConsumer, Edge, ActiveLow)
+ {
+ BOARD_TRACKPAD_IRQ
+ }
+ })
+
+ Method (_STA)
+ {
+ If (LEqual (\S1EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ Name (_PRW, Package() { BOARD_TRACKPAD_WAKE_GPIO, 0x3 })
+
+ Method (_DSW, 3, NotSerialized)
+ {
+ Store (BOARD_TRACKPAD_WAKE_GPIO, Local0)
+ If (LEqual (Arg0, 1)) {
+ // Enable GPIO as wake source
+ \_SB.PCI0.LPCB.GWAK (Local0)
+ }
+ }
+
+ /* Allow device to power off in S0 */
+ Name (_S0W, 4)
+ }
+}
diff --git a/src/mainboard/google/slippy/variants/leon/include/variant/gpio.h b/src/mainboard/google/slippy/variants/leon/include/variant/gpio.h
new file mode 100644
index 0000000..d808899
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/leon/include/variant/gpio.h
@@ -0,0 +1,120 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef LEON_GPIO_H
+#define LEON_GPIO_H
+
+struct pch_lp_gpio_map;
+
+const struct pch_lp_gpio_map mainboard_gpio_map[] = {
+ LP_GPIO_UNUSED, /* 0: UNUSED */
+ LP_GPIO_UNUSED, /* 1: UNUSED */
+ LP_GPIO_UNUSED, /* 2: UNUSED */
+ LP_GPIO_UNUSED, /* 3: UNUSED */
+ LP_GPIO_NATIVE, /* 4: NATIVE: I2C0_SDA_GPIO4 */
+ LP_GPIO_NATIVE, /* 5: NATIVE: I2C0_SCL_GPIO5 */
+ LP_GPIO_NATIVE, /* 6: NATIVE: I2C1_SDA_GPIO6 */
+ LP_GPIO_NATIVE, /* 7: NATIVE: I2C1_SCL_GPIO7 */
+ LP_GPIO_ACPI_SCI, /* 8: LTE_WAKE_L_Q */
+ LP_GPIO_INPUT, /* 9: RAM_ID1 */
+ LP_GPIO_ACPI_SCI, /* 10: WLAN_WAKE_L_Q */
+ LP_GPIO_UNUSED, /* 11: UNUSED */
+ LP_GPIO_INPUT_INVERT, /* 12: TRACKPAD_INT_L (WAKE) */
+ LP_GPIO_INPUT, /* 13: RAM_ID0 */
+ LP_GPIO_INPUT, /* 14: EC_IN_RW */
+ LP_GPIO_UNUSED, /* 15: UNUSED (STRAP) */
+ LP_GPIO_UNUSED, /* 16: UNUSED */
+ LP_GPIO_UNUSED, /* 17: UNUSED */
+ LP_GPIO_NATIVE, /* 18: PCIE_CLKREQ_WLAN# */
+ LP_GPIO_UNUSED, /* 19: UNUSED */
+ LP_GPIO_UNUSED, /* 20: UNUSED */
+ LP_GPIO_UNUSED, /* 21: UNUSED */
+ LP_GPIO_UNUSED, /* 22: UNUSED */
+ LP_GPIO_UNUSED, /* 23: UNUSED */
+ LP_GPIO_UNUSED, /* 24: UNUSED */
+ LP_GPIO_INPUT_INVERT, /* 25: TOUCH_INT_L (WAKE) */
+ LP_GPIO_UNUSED, /* 26: UNUSED */
+ LP_GPIO_UNUSED, /* 27: UNUSED */
+ LP_GPIO_UNUSED, /* 28: UNUSED */
+ LP_GPIO_UNUSED, /* 29: UNUSED */
+ LP_GPIO_NATIVE, /* 30: NATIVE: PCH_SUSWARN_L */
+ LP_GPIO_NATIVE, /* 31: NATIVE: ACPRESENT */
+ LP_GPIO_NATIVE, /* 32: NATIVE: LPC_CLKRUN_L */
+ LP_GPIO_NATIVE, /* 33: NATIVE: DEVSLP0 */
+ LP_GPIO_ACPI_SMI, /* 34: EC_SMI_L */
+ LP_GPIO_ACPI_SMI, /* 35: PCH_NMI_DBG_L (route in NMI_EN) */
+ LP_GPIO_ACPI_SCI, /* 36: EC_SCI_L */
+ LP_GPIO_UNUSED, /* 37: UNUSED */
+ LP_GPIO_UNUSED, /* 38: UNUSED */
+ LP_GPIO_UNUSED, /* 39: UNUSED */
+ LP_GPIO_NATIVE, /* 40: NATIVE: USB_OC0# */
+ LP_GPIO_UNUSED, /* 41: UNUSED */
+ LP_GPIO_NATIVE, /* 42: NATIVE: USB_OC2# */
+ LP_GPIO_UNUSED, /* 43: UNUSED */
+ LP_GPIO_OUT_HIGH, /* 44: PP3300_SSD_EN */
+ LP_GPIO_OUT_HIGH, /* 45: PP3300_CODEC_EN */
+ LP_GPIO_OUT_HIGH, /* 46: WLAN_DISABLE_L */
+ LP_GPIO_INPUT, /* 47: RAM_ID2 */
+ LP_GPIO_UNUSED, /* 48: UNUSED */
+ LP_GPIO_UNUSED, /* 49: UNUSED */
+ LP_GPIO_UNUSED, /* 50: UNUSED */
+ LP_GPIO_UNUSED, /* 51: ALS_INT_L */
+ LP_GPIO_INPUT, /* 52: SIM_DET */
+ LP_GPIO_PIRQ, /* 53: TRACKPAD_INT_DX */
+ LP_GPIO_PIRQ, /* 54: TOUCH_INT_L_DX */
+ LP_GPIO_UNUSED, /* 55: UNUSED */
+ LP_GPIO_UNUSED, /* 56: UNUSED */
+ LP_GPIO_OUT_HIGH, /* 57: PP3300_CCD_EN */
+ LP_GPIO_INPUT, /* 58: PCH_SPI_WP_D */
+ LP_GPIO_OUT_HIGH, /* 59: LTE_DISABLE_L */
+ LP_GPIO_NATIVE, /* 60: NATIVE: SML0ALERT */
+ LP_GPIO_UNUSED, /* 61: UNUSED */
+ LP_GPIO_UNUSED, /* 62: UNUSED */
+ LP_GPIO_NATIVE, /* 63: NATIVE: PCH_SLP_S5_L */
+ LP_GPIO_UNUSED, /* 64: UNUSED */
+ LP_GPIO_UNUSED, /* 65: UNUSED */
+ LP_GPIO_UNUSED, /* 66: UNUSED (STRAP) */
+ LP_GPIO_UNUSED, /* 67: UNUSED */
+ LP_GPIO_UNUSED, /* 68: UNUSED */
+ LP_GPIO_UNUSED, /* 69: UNUSED */
+ LP_GPIO_UNUSED, /* 70: UNUSED */
+ LP_GPIO_NATIVE, /* 71: NATIVE: MODPHY_EN */
+ LP_GPIO_NATIVE, /* 72: NATIVE: PCH_BATLOW# */
+ LP_GPIO_NATIVE, /* 73: NATIVE: SMB1ALERT# */
+ LP_GPIO_NATIVE, /* 74: NATIVE: SMB_ME1_DAT */
+ LP_GPIO_NATIVE, /* 75: NATIVE: SMB_ME1_CLK */
+ LP_GPIO_UNUSED, /* 76: UNUSED */
+ LP_GPIO_UNUSED, /* 77: UNUSED */
+ LP_GPIO_UNUSED, /* 78: UNUSED */
+ LP_GPIO_UNUSED, /* 79: UNUSED */
+ LP_GPIO_UNUSED, /* 80: UNUSED */
+ LP_GPIO_NATIVE, /* 81: NATIVE: SPKR */
+ LP_GPIO_NATIVE, /* 82: NATIVE: EC_RCIN_L */
+ LP_GPIO_UNUSED, /* 83: UNUSED */
+ LP_GPIO_UNUSED, /* 84: UNUSED */
+ LP_GPIO_UNUSED, /* 85: UNUSED */
+ LP_GPIO_UNUSED, /* 86: UNUSED (STRAP) */
+ LP_GPIO_UNUSED, /* 87: UNUSED */
+ LP_GPIO_UNUSED, /* 88: UNUSED */
+ LP_GPIO_UNUSED, /* 89: UNUSED */
+ LP_GPIO_UNUSED, /* 90: UNUSED */
+ LP_GPIO_UNUSED, /* 91: UNUSED */
+ LP_GPIO_UNUSED, /* 92: UNUSED */
+ LP_GPIO_UNUSED, /* 93: UNUSED */
+ LP_GPIO_UNUSED, /* 94: UNUSED */
+ LP_GPIO_END
+};
+
+#endif
\ No newline at end of file
diff --git a/src/mainboard/google/slippy/variants/leon/romstage.c b/src/mainboard/google/slippy/variants/leon/romstage.c
new file mode 100644
index 0000000..c9cf07b
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/leon/romstage.c
@@ -0,0 +1,171 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <cbfs.h>
+#include <console/console.h>
+#include <cpu/intel/haswell/haswell.h>
+#include <northbridge/intel/haswell/haswell.h>
+#include <northbridge/intel/haswell/raminit.h>
+#include <southbridge/intel/lynxpoint/pch.h>
+#include <southbridge/intel/lynxpoint/lp_gpio.h>
+#include <variant/gpio.h>
+#include "../../variant.h"
+
+const struct rcba_config_instruction rcba_config[] = {
+
+ /*
+ * GFX INTA -> PIRQA (MSI)
+ * D28IP_P1IP PCIE INTA -> PIRQA
+ * D29IP_E1P EHCI INTA -> PIRQD
+ * D20IP_XHCI XHCI INTA -> PIRQC (MSI)
+ * D31IP_SIP SATA INTA -> PIRQF (MSI)
+ * D31IP_SMIP SMBUS INTB -> PIRQG
+ * D31IP_TTIP THRT INTC -> PIRQA
+ * D27IP_ZIP HDA INTA -> PIRQG (MSI)
+ */
+
+ /* Device interrupt pin register (board specific) */
+ RCBA_SET_REG_32(D31IP, (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
+ (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)),
+ RCBA_SET_REG_32(D29IP, (INTA << D29IP_E1P)),
+ RCBA_SET_REG_32(D28IP, (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) |
+ (INTB << D28IP_P4IP)),
+ RCBA_SET_REG_32(D27IP, (INTA << D27IP_ZIP)),
+ RCBA_SET_REG_32(D26IP, (INTA << D26IP_E2P)),
+ RCBA_SET_REG_32(D22IP, (NOINT << D22IP_MEI1IP)),
+ RCBA_SET_REG_32(D20IP, (INTA << D20IP_XHCI)),
+
+ /* Device interrupt route registers */
+ RCBA_SET_REG_32(D31IR, DIR_ROUTE(PIRQG, PIRQC, PIRQB, PIRQA)),/* LPC */
+ RCBA_SET_REG_32(D29IR, DIR_ROUTE(PIRQD, PIRQD, PIRQD, PIRQD)),/* EHCI */
+ RCBA_SET_REG_32(D28IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),/* PCIE */
+ RCBA_SET_REG_32(D27IR, DIR_ROUTE(PIRQG, PIRQG, PIRQG, PIRQG)),/* HDA */
+ RCBA_SET_REG_32(D22IR, DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA)),/* ME */
+ RCBA_SET_REG_32(D21IR, DIR_ROUTE(PIRQE, PIRQF, PIRQF, PIRQF)),/* SIO */
+ RCBA_SET_REG_32(D20IR, DIR_ROUTE(PIRQC, PIRQC, PIRQC, PIRQC)),/* XHCI */
+ RCBA_SET_REG_32(D23IR, DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH)),/* SDIO */
+
+ /* Disable unused devices (board specific) */
+ RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS),
+
+ RCBA_END_CONFIG,
+};
+
+/* Copy SPD data for on-board memory */
+static void copy_spd(struct pei_data *peid)
+{
+ const int gpio_vector[] = {13, 9, 47, -1};
+ int spd_index = get_gpios(gpio_vector);
+ char *spd_file;
+ size_t spd_file_len;
+
+ printk(BIOS_DEBUG, "SPD index %d\n", spd_index);
+ spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD,
+ &spd_file_len);
+ if (!spd_file)
+ die("SPD data not found.");
+
+ /* Limiting to a single dimm for 2GB configuration
+ * Identified by bit 3
+ */
+ if (spd_index & 0x4)
+ peid->dimm_channel1_disabled = 3;
+
+ if (spd_file_len <
+ ((spd_index + 1) * sizeof(peid->spd_data[0]))) {
+ printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n");
+ spd_index = 0;
+ }
+
+ if (spd_file_len < sizeof(peid->spd_data[0]))
+ die("Missing SPD data.");
+
+ memcpy(peid->spd_data[0],
+ spd_file +
+ spd_index * sizeof(peid->spd_data[0]),
+ sizeof(peid->spd_data[0]));
+}
+
+void variant_romstage_entry(unsigned long bist)
+{
+ struct pei_data pei_data = {
+ .pei_version = PEI_VERSION,
+ .mchbar = (uintptr_t)DEFAULT_MCHBAR,
+ .dmibar = (uintptr_t)DEFAULT_DMIBAR,
+ .epbar = DEFAULT_EPBAR,
+ .pciexbar = DEFAULT_PCIEXBAR,
+ .smbusbar = SMBUS_IO_BASE,
+ .wdbbar = 0x4000000,
+ .wdbsize = 0x1000,
+ .hpet_address = HPET_ADDR,
+ .rcba = (uintptr_t)DEFAULT_RCBA,
+ .pmbase = DEFAULT_PMBASE,
+ .gpiobase = DEFAULT_GPIOBASE,
+ .temp_mmio_base = 0xfed08000,
+ .system_type = 5, /* ULT */
+ .tseg_size = CONFIG_SMM_TSEG_SIZE,
+ .spd_addresses = { 0xff, 0x00, 0xff, 0x00 },
+ .ec_present = 1,
+ // 0 = leave channel enabled
+ // 1 = disable dimm 0 on channel
+ // 2 = disable dimm 1 on channel
+ // 3 = disable dimm 0+1 on channel
+ .dimm_channel0_disabled = 2,
+ .dimm_channel1_disabled = 2,
+ .max_ddr3_freq = 1600,
+ .usb_xhci_on_resume = 1,
+ .usb2_ports = {
+ /* Length, Enable, OCn#, Location */
+ { 0x0040, 1, 0, /* P0: Port A, CN10 */
+ USB_PORT_BACK_PANEL },
+ { 0x0040, 1, 2, /* P1: Port B, CN11 */
+ USB_PORT_BACK_PANEL },
+ { 0x0080, 1, USB_OC_PIN_SKIP, /* P2: CCD */
+ USB_PORT_INTERNAL },
+ { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */
+ USB_PORT_MINI_PCIE },
+ { 0x0080, 1, USB_OC_PIN_SKIP, /* P4: SD Card */
+ USB_PORT_INTERNAL },
+ { 0x0040, 1, USB_OC_PIN_SKIP, /* P5: LTE */
+ USB_PORT_INTERNAL },
+ { 0x0040, 1, USB_OC_PIN_SKIP, /* P6: SIM CARD */
+ USB_PORT_FLEX },
+ { 0x0000, 0, USB_OC_PIN_SKIP, /* P7: EMPTY */
+ USB_PORT_SKIP },
+ },
+ .usb3_ports = {
+ /* Enable, OCn# */
+ { 1, 0 }, /* P1; Port A, CN10 */
+ { 1, 2 }, /* P2; Port B, CN11 */
+ { 0, USB_OC_PIN_SKIP }, /* P3; */
+ { 0, USB_OC_PIN_SKIP }, /* P4; */
+ },
+ };
+
+ struct romstage_params romstage_params = {
+ .pei_data = &pei_data,
+ .gpio_map = &mainboard_gpio_map,
+ .rcba_config = &rcba_config[0],
+ .bist = bist,
+ .copy_spd = copy_spd,
+ };
+
+ /* Call into the real romstage main with this board's attributes. */
+ romstage_common(&romstage_params);
+}
diff --git a/src/mainboard/google/slippy/variants/leon/spd/Hynix_HMT425S6AFR6A.spd.hex b/src/mainboard/google/slippy/variants/leon/spd/Hynix_HMT425S6AFR6A.spd.hex
new file mode 100644
index 0000000..7b09327
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/leon/spd/Hynix_HMT425S6AFR6A.spd.hex
@@ -0,0 +1,17 @@
+# Hynix HMT425S6AFR6A-PBA
+92 12 0B 03 04 19 02 02 03 52 01 08 0A 00 FE 00
+69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 01
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 0F 11 62 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 80 AD 01 00 00 00 00 00 00 FF AB
+48 4D 54 34 32 35 53 36 41 46 52 36 41 2D 50 42
+20 20 4E 30 80 AD 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
diff --git a/src/mainboard/google/slippy/variants/leon/spd/Micron_4KTF25664HZ.spd.hex b/src/mainboard/google/slippy/variants/leon/spd/Micron_4KTF25664HZ.spd.hex
new file mode 100644
index 0000000..cbe9e4f
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/leon/spd/Micron_4KTF25664HZ.spd.hex
@@ -0,0 +1,17 @@
+# Micron 4KTF25664HZ-1G6E1
+92 11 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00
+69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 05
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 0F 01 02 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 80 2C 00 00 00 00 00 00 00 AD 75
+34 4B 54 46 32 35 36 36 34 48 5A 2D 31 47 36 45
+31 20 45 31 80 2C 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
diff --git a/src/mainboard/google/slippy/variants/leon/spd/Samsung_K4B4G1646Q.spd.hex b/src/mainboard/google/slippy/variants/leon/spd/Samsung_K4B4G1646Q.spd.hex
new file mode 100644
index 0000000..d6b0770
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/leon/spd/Samsung_K4B4G1646Q.spd.hex
@@ -0,0 +1,17 @@
+# Samsung K4B4G1646Q-HYK0
+92 12 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00
+69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 05
+00 00 00 00 00 00 00 00 88 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 0F 01 02 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 80 CE 01 00 00 00 00 00 00 6C F9
+4D 34 37 31 42 35 36 37 34 51 48 30 2D 59 4B 30
+20 20 00 00 80 CE 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
\ No newline at end of file
diff --git a/src/mainboard/google/slippy/variants/peppy/Makefile.inc b/src/mainboard/google/slippy/variants/peppy/Makefile.inc
new file mode 100644
index 0000000..576af04
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/peppy/Makefile.inc
@@ -0,0 +1,42 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2012 Google Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+ramstage-$(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT) += gma.c i915io.c
+
+## DIMM SPD for on-board memory
+SPD_BIN = $(obj)/spd.bin
+
+# Order of names in SPD_SOURCES is important!
+SPD_SOURCES = Micron_4KTF25664HZ # 0: 4GB / CH0 + CH1
+SPD_SOURCES += Hynix_HMT425S6AFR6A # 1: 4GB / CH0 + CH1
+SPD_SOURCES += Elpida_EDJ4216EFBG # 2: 4GB / CH0 + CH1
+SPD_SOURCES += Micron_4KTF25664HZ # 3: Reserved / place holder
+SPD_SOURCES += Micron_4KTF25664HZ # 4: 2GB / CH0 + CH1
+SPD_SOURCES += Hynix_HMT425S6AFR6A # 5: 2GB / CH0 + CH1
+SPD_SOURCES += Elpida_EDJ4216EFBG # 6: 2GB / CH0 + CH1
+
+SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/spd/$(f).spd.hex)
+
+# Include spd ROM data
+$(SPD_BIN): $(SPD_DEPS)
+ for f in $+; \
+ do for c in $$(cat $$f | grep -v ^#); \
+ do printf $$(printf '\%o' 0x$$c); \
+ done; \
+ done > $@
+
+cbfs-files-y += spd.bin
+spd.bin-file := $(SPD_BIN)
+spd.bin-type := spd
diff --git a/src/mainboard/google/slippy/variants/peppy/devicetree.cb b/src/mainboard/google/slippy/variants/peppy/devicetree.cb
new file mode 100644
index 0000000..e9875a6
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/peppy/devicetree.cb
@@ -0,0 +1,129 @@
+chip northbridge/intel/haswell
+ # IGD Displays
+ register "gfx.ndid" = "3"
+ register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
+
+ # Enable eDP Hotplug with 6ms pulse
+ register "gpu_dp_d_hotplug" = "0x06"
+
+ # Disable DisplayPort C Hotplug
+ register "gpu_dp_c_hotplug" = "0x00"
+
+ # Enable HDMI Hotplug with 6ms pulse
+ register "gpu_dp_b_hotplug" = "0x06"
+
+ # Set backlight PWM values for eDP
+ register "gpu_cpu_backlight" = "0x00000200"
+ register "gpu_pch_backlight" = "0x04000000"
+
+ # Enable Panel and configure power delays
+ register "gpu_panel_port_select" = "1" # eDP
+ register "gpu_panel_power_cycle_delay" = "5" # 400ms
+ register "gpu_panel_power_up_delay" = "400" # 40ms
+ register "gpu_panel_power_down_delay" = "150" # 15ms
+ register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms
+ register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms
+
+ device cpu_cluster 0 on
+ chip cpu/intel/haswell
+ device lapic 0 on end
+ # Magic APIC ID to locate this chip
+ device lapic 0xACAC off end
+
+ register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E)
+ register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3)
+ register "c3_battery" = "9" # ACPI(C3) = MWAIT(C7S)
+
+ register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E)
+ register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3)
+ register "c3_acpower" = "9" # ACPI(C3) = MWAIT(C7S)
+ end
+ end
+
+ device domain 0 on
+ device pci 00.0 on end # host bridge
+ device pci 02.0 on end # vga controller
+ device pci 03.0 on end # mini-hd audio
+
+ chip southbridge/intel/lynxpoint
+ register "pirqa_routing" = "0x8b"
+ register "pirqb_routing" = "0x8a"
+ register "pirqc_routing" = "0x8b"
+ register "pirqd_routing" = "0x8b"
+ register "pirqe_routing" = "0x80"
+ register "pirqf_routing" = "0x80"
+ register "pirqg_routing" = "0x80"
+ register "pirqh_routing" = "0x80"
+
+ # EC range is 0x800-0x9ff
+ register "gen1_dec" = "0x00fc0801"
+ register "gen2_dec" = "0x00fc0901"
+
+ # EC_SMI is GPIO34
+ register "alt_gp_smi_en" = "0x0004"
+ register "gpe0_en_1" = "0x00000000"
+ # EC_SCI is GPIO36
+ register "gpe0_en_2" = "0x00000010"
+ register "gpe0_en_3" = "0x00000000"
+ register "gpe0_en_4" = "0x00000000"
+
+ register "ide_legacy_combined" = "0x0"
+ register "sata_ahci" = "0x1"
+ register "sata_port_map" = "0x1"
+
+ # DTLE DATA / EDGE values
+ register "sata_port0_gen3_dtle" = "0x5"
+ register "sata_port1_gen3_dtle" = "0x5"
+
+ register "sio_acpi_mode" = "1"
+ register "sio_i2c0_voltage" = "0" # 3.3V
+ register "sio_i2c1_voltage" = "0" # 3.3V
+
+ # Force enable ASPM for PCIe Port1
+ register "pcie_port_force_aspm" = "0x01"
+
+ # Route all USB ports to XHCI per default
+ register "xhci_default" = "1"
+
+ # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP
+ register "icc_clock_disable" = "0x013c0000"
+
+ device pci 13.0 off end # Smart Sound Audio DSP
+ device pci 14.0 on end # USB3 XHCI
+ device pci 15.0 on end # Serial I/O DMA
+ device pci 15.1 on end # I2C0
+ device pci 15.2 on end # I2C1
+ device pci 15.3 off end # GSPI0
+ device pci 15.4 off end # GSPI1
+ device pci 15.5 off end # UART0
+ device pci 15.6 off end # UART1
+ device pci 16.0 on end # Management Engine Interface 1
+ device pci 16.1 off end # Management Engine Interface 2
+ device pci 16.2 off end # Management Engine IDE-R
+ device pci 16.3 off end # Management Engine KT
+ device pci 17.0 off end # SDIO
+ device pci 19.0 off end # GbE
+ device pci 1b.0 on end # High Definition Audio
+ device pci 1c.0 on end # PCIe Port #1
+ device pci 1c.1 off end # PCIe Port #2
+ device pci 1c.2 off end # PCIe Port #3
+ device pci 1c.3 off end # PCIe Port #4
+ device pci 1c.4 off end # PCIe Port #5
+ device pci 1c.5 off end # PCIe Port #6
+ device pci 1d.0 on end # USB2 EHCI
+ device pci 1e.0 off end # PCI bridge
+ device pci 1f.0 on
+ chip ec/google/chromeec
+ # We only have one init function that
+ # we need to call to initialize the
+ # keyboard part of the EC.
+ device pnp ff.1 on # dummy address
+ end
+ end
+ end # LPC bridge
+ device pci 1f.2 on end # SATA Controller
+ device pci 1f.3 on end # SMBus
+ device pci 1f.6 on end # Thermal
+ end
+ end
+end
diff --git a/src/mainboard/google/slippy/variants/peppy/gma.c b/src/mainboard/google/slippy/variants/peppy/gma.c
new file mode 100644
index 0000000..afdb4d6
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/peppy/gma.c
@@ -0,0 +1,272 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <types.h>
+#include <string.h>
+#include <stdlib.h>
+#include <device/device.h>
+#include <device/device.h>
+#include <device/pci_def.h>
+#include <device/pci_ops.h>
+#include <console/console.h>
+#include <delay.h>
+#include <pc80/mc146818rtc.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <arch/interrupt.h>
+#include <boot/coreboot_tables.h>
+#include <smbios.h>
+#include <device/pci.h>
+#include <ec/google/chromeec/ec.h>
+
+#include <cpu/x86/tsc.h>
+#include <cpu/x86/cache.h>
+#include <cpu/x86/mtrr.h>
+#include <cpu/x86/msr.h>
+#include <edid.h>
+#include <drivers/intel/gma/i915.h>
+#include <northbridge/intel/haswell/haswell.h>
+#include <variant/mainboard.h>
+
+/*
+ * Here is the rough outline of how we bring up the display:
+ * 1. Upon power-on Sink generates a hot plug detection pulse thru HPD
+ * 2. Source determines video mode by reading DPCD receiver capability field
+ * (DPCD 00000h to 0000Dh) including eDP CP capability register (DPCD
+ * 0000Dh).
+ * 3. Sink replies DPCD receiver capability field.
+ * 4. Source starts EDID read thru I2C-over-AUX.
+ * 5. Sink replies EDID thru I2C-over-AUX.
+ * 6. Source determines link configuration, such as MAX_LINK_RATE and
+ * MAX_LANE_COUNT. Source also determines which type of eDP Authentication
+ * method to use and writes DPCD link configuration field (DPCD 00100h to
+ * 0010Ah) including eDP configuration set (DPCD 0010Ah).
+ * 7. Source starts link training. Sink does clock recovery and equalization.
+ * 8. Source reads DPCD link status field (DPCD 00200h to 0020Bh).
+ * 9. Sink replies DPCD link status field. If main link is not stable, Source
+ * repeats Step 7.
+ * 10. Source sends MSA (Main Stream Attribute) data. Sink extracts video
+ * parameters and recovers stream clock.
+ * 11. Source sends video data.
+ */
+
+/* how many bytes do we need for the framebuffer?
+ * Well, this gets messy. To get an exact answer, we have
+ * to ask the panel, but we'd rather zero the memory
+ * and set up the gtt while the panel powers up. So,
+ * we take a reasonable guess, secure in the knowledge that the
+ * MRC has to overestimate the number of bytes used.
+ * 8 MiB is a very safe guess. There may be a better way later, but
+ * fact is, the initial framebuffer is only very temporary. And taking
+ * a little long is ok; this is done much faster than the AUX
+ * channel is ready for IO.
+ */
+#define FRAME_BUFFER_BYTES (8*MiB)
+/* how many 4096-byte pages do we need for the framebuffer?
+ * There are hard ways to get this, and easy ways:
+ * there are FRAME_BUFFER_BYTES/4096 pages, since pages are 4096
+ * on this chip (and in fact every Intel graphics chip we've seen).
+ */
+#define FRAME_BUFFER_PAGES (FRAME_BUFFER_BYTES/(4096))
+
+
+static int i915_init_done = 0;
+
+/* fill the palette. */
+static void palette(void)
+{
+ int i;
+ unsigned long color = 0;
+
+ for(i = 0; i < 256; i++, color += 0x010101){
+ gtt_write(_LGC_PALETTE_A + (i << 2),color);
+ }
+}
+
+void mainboard_train_link(struct intel_dp *intel_dp)
+{
+ u8 read_val;
+ u8 link_status[DP_LINK_STATUS_SIZE];
+
+ gtt_write(DP_TP_CTL(intel_dp->port),
+ DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE);
+ gtt_write(DDI_BUF_CTL_A,
+ DDI_BUF_CTL_ENABLE|
+ DDI_A_4_LANES|DDI_PORT_WIDTH_X1|DDI_INIT_DISPLAY_DETECTED|0x80000011);
+
+ intel_dp_get_training_pattern(intel_dp, &read_val);
+ intel_dp_set_training_pattern(intel_dp,
+ DP_TRAINING_PATTERN_1 | DP_LINK_QUAL_PATTERN_DISABLE |
+ DP_SYMBOL_ERROR_COUNT_BOTH);
+
+ intel_dp_set_training_lane0(intel_dp,
+ DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0);
+ intel_dp_get_link_status(intel_dp, link_status);
+
+ gtt_write(DP_TP_CTL(intel_dp->port),
+ DP_TP_CTL_ENABLE |
+ DP_TP_CTL_ENHANCED_FRAME_ENABLE | DP_TP_CTL_LINK_TRAIN_PAT2);
+
+ intel_dp_get_training_pattern(intel_dp, &read_val);
+ intel_dp_set_training_pattern(intel_dp, DP_TRAINING_PATTERN_2 |
+ DP_LINK_QUAL_PATTERN_DISABLE | DP_SYMBOL_ERROR_COUNT_BOTH);
+ intel_dp_get_link_status(intel_dp, link_status);
+ intel_dp_get_lane_align_status(intel_dp, &read_val);
+ intel_dp_get_training_pattern(intel_dp, &read_val);
+ intel_dp_set_training_pattern(intel_dp, DP_TRAINING_PATTERN_DISABLE |
+ DP_LINK_QUAL_PATTERN_DISABLE | DP_SYMBOL_ERROR_COUNT_BOTH);
+}
+
+/* This variable controls whether the test_gfx function below puts up
+ * color bars or not. In previous revs we ifdef'd the test_gfx function out
+ * but it's handy, especially when using a JTAG debugger
+ * to be able to enable and disable a test graphics.
+ */
+int show_test = 0;
+
+static void test_gfx(struct intel_dp *dp)
+{
+ int i;
+
+ if (!show_test)
+ return;
+ /* This is a sanity test code which fills the screen with two bands --
+ green and blue. It is very useful to ensure all the initializations
+ are made right. Thus, to be used only for testing, not otherwise
+ */
+
+ for (i = 0; i < (dp->edid.mode.va - 4); i++) {
+ u32 *l;
+ int j;
+ u32 tcolor = 0x0ff;
+ for (j = 0; j < (dp->edid.mode.ha-4); j++) {
+ if (j == (dp->edid.mode.ha/2)) {
+ tcolor = 0xff00;
+ }
+ l = (u32*)(dp->graphics + i * dp->stride + j * sizeof(tcolor));
+ memcpy(l,&tcolor,sizeof(tcolor));
+ }
+ }
+ printk(BIOS_SPEW, "sleep 10\n");
+ delay(10);
+}
+
+void mainboard_set_port_clk_dp(struct intel_dp *intel_dp)
+{
+ u32 ddi_pll_sel = 0;
+
+ switch (intel_dp->link_bw) {
+ case DP_LINK_BW_1_62:
+ ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
+ break;
+ case DP_LINK_BW_2_7:
+ ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
+ break;
+ case DP_LINK_BW_5_4:
+ ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
+ break;
+ default:
+ printk(BIOS_ERR, "invalid link bw %d\n", intel_dp->link_bw);
+ return;
+ }
+
+ gtt_write(PORT_CLK_SEL(intel_dp->port), ddi_pll_sel);
+}
+
+int panel_lightup(struct intel_dp *dp, unsigned int init_fb)
+{
+ int i;
+ int edid_ok;
+ int pixels = FRAME_BUFFER_BYTES/64;
+
+ gtt_write(PCH_PP_CONTROL,0xabcd000f);
+ delay(1);
+
+ void runio(struct intel_dp *dp);
+ /* hard codes -- stuff you can only know from the mainboard */
+ dp->gen = 8; // This is gen 8 which we believe is Haswell
+ dp->is_haswell = 1;
+ dp->DP = 0x2;
+ dp->pipe = PIPE_A;
+ dp->port = PORT_A;
+ dp->plane = PLANE_A;
+ dp->pipe_bits_per_pixel = 24;
+ dp->type = INTEL_OUTPUT_EDP;
+ dp->output_reg = DP_A;
+ /* observed from YABEL. */
+ dp->aux_clock_divider = 0xe1;
+ dp->precharge = 3;
+
+ /* 1. Normal mode: Set the first page to zero and make
+ all GTT entries point to the same page
+ 2. Developer/Recovery mode: Set up a tasteful color
+ so people know we are alive. */
+ if (init_fb || show_test) {
+ set_translation_table(0, FRAME_BUFFER_PAGES, dp->physbase,
+ 4096);
+ memset((void *)dp->graphics, 0x55, FRAME_BUFFER_PAGES*4096);
+ } else {
+ set_translation_table(0, FRAME_BUFFER_PAGES, dp->physbase, 0);
+ memset((void*)dp->graphics, 0, 4096);
+ }
+
+ dp->address = 0x50;
+
+ if ( !intel_dp_get_dpcd(dp) )
+ goto fail;
+
+ intel_dp_i2c_aux_ch(dp, MODE_I2C_WRITE, 0, NULL);
+ for(dp->edidlen = i = 0; i < sizeof(dp->rawedid); i++){
+ if (intel_dp_i2c_aux_ch(dp, MODE_I2C_READ,
+ 0x50, &dp->rawedid[i]) < 0)
+ break;
+ dp->edidlen++;
+ }
+
+ edid_ok = decode_edid(dp->rawedid, dp->edidlen, &dp->edid);
+
+ printk(BIOS_SPEW, "decode edid returns %d\n", edid_ok);
+
+ compute_display_params(dp);
+
+ printk(BIOS_SPEW, "pixel_clock is %i, link_clock is %i\n",
+ dp->edid.mode.pixel_clock, dp->edid.link_clock);
+
+ intel_ddi_set_pipe_settings(dp);
+
+ runio(dp);
+
+ palette();
+
+ pixels = dp->edid.mode.ha * (dp->edid.mode.va-4) * 4;
+ printk(BIOS_SPEW, "ha=%d, va=%d\n",dp->edid.mode.ha, dp->edid.mode.va);
+ test_gfx(dp);
+
+ set_vbe_mode_info_valid(&dp->edid, (uintptr_t)dp->graphics);
+ i915_init_done = 1;
+ return 1;
+
+fail:
+ printk(BIOS_SPEW, "Graphics could not be started;");
+ /* unclear we will *ever* want to do this. */
+ if (0){
+ printk(BIOS_SPEW, "Turn off power and wait ...");
+ gtt_write(PCH_PP_CONTROL,0xabcd0000);
+ udelay(600000);
+ gtt_write(PCH_PP_CONTROL,0xabcd000f);
+ }
+ printk(BIOS_SPEW, "Returning.\n");
+ return 0;
+}
diff --git a/src/mainboard/google/slippy/variants/peppy/hda_verb.c b/src/mainboard/google/slippy/variants/peppy/hda_verb.c
new file mode 100644
index 0000000..a5ec9bb
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/peppy/hda_verb.c
@@ -0,0 +1,107 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <device/azalia_device.h>
+
+const u32 cim_verb_data[] = {
+ /* coreboot specific header */
+ 0x10ec0283, // Codec Vendor / Device ID: Realtek ALC283
+ 0x10ec0283, // Subsystem ID
+ 0x0000000e, // Number of jacks (NID entries)
+
+ 0x0017ff00, // Function Reset
+ 0x0017ff00, // Double Function Reset
+ 0x000F0000, // Pad - get vendor id
+ 0x000F0002, // Pad - get revision id
+
+ /* NID 0x01, HDA Codec Subsystem ID Verb Table */
+ AZALIA_SUBVENDOR(0x0, 0x11790670),
+
+ /* Pin Widget Verb Table */
+
+ /* Pin Complex (NID 0x12) DMIC - Disabled */
+ AZALIA_PIN_CFG(0x0, 0x12, 0x411111f0),
+
+ /* Pin Complex (NID 0x14) SPKR-OUT - Internal Speakers */
+ // group 1, cap 0
+ // no connector, no jack detect
+ // speaker out, analog
+ // fixed function, internal, Location N/A
+ AZALIA_PIN_CFG(0x0, 0x14, 0x90170110),
+
+ /* Pin Complex (NID 0x17) MONO Out - Disabled */
+ AZALIA_PIN_CFG(0x0, 0x17, 0x411111f0),
+
+ /* Pin Complex (NID 0x18) MIC1 PORTB - Disabled */
+ AZALIA_PIN_CFG(0x0, 0x18, 0x411111f0),
+
+ /* Pin Complex (NID 0x19) MIC2 - 3.5mm Jack */
+ // group2, cap 0
+ // black, jack detect
+ // Mic in, 3.5mm Jack
+ // connector, External left panel
+ AZALIA_PIN_CFG(0x0, 0x19, 0x03a11020),
+
+ /* Pin Complex (NID 0x1A) LINE1 - Internal Mic */
+ // group 1, cap 1
+ // no connector, no jack detect
+ // mic in, analog connection
+ // Fixed function, internal, Location N/A
+ AZALIA_PIN_CFG(0x0, 0x1a, 0x90a70111),
+
+ /* Pin Complex (NID 0x1B) LINE2 - Disabled */
+ AZALIA_PIN_CFG(0x0, 0x1b, 0x411111f0),
+
+ /* Pin Complex (NID 0x1D) PCBeep */
+ // eapd low on ex-amp, laptop, custom enable
+ // mute spkr on hpout
+ // pcbeep en able, checksum
+ // no physical, Internal, Location N/A
+ AZALIA_PIN_CFG(0x0, 0x1d, 0x4015812d),
+
+ /* Pin Complex (NID 0x1E) SPDIF-OUT - Disabled*/
+ AZALIA_PIN_CFG(0x0, 0x1e, 0x411111f0),
+
+ /* Pin Complex (NID 0x21) HP-OUT - 3.5mm Jack*/
+ // group2, cap 1
+ // black, jack detect
+ // HPOut, 3.5mm Jack
+ // connector, left panel
+ AZALIA_PIN_CFG(0x0, 0x21, 0x03211021),
+
+ /* Undocumented settings from Realtek (needed for beep_gen) */
+ /* Widget node 0x20 */
+ 0x02050010,
+ 0x02040c20,
+ 0x0205001b,
+ 0x0204081b,
+
+ /* Tuned jack detection */
+ 0x02050043,
+ 0x0204A614,
+ 0x02050047,
+ 0x02049470,
+};
+
+const u32 pc_beep_verbs[] = {
+ 0x00170500, /* power up everything (codec, dac, adc, mixers) */
+ 0x01470740, /* enable speaker out */
+ 0x01470c02, /* set speaker EAPD pin */
+ 0x0143b01f, /* unmute speaker */
+ 0x00c37100, /* unmute mixer nid 0xc input 1 */
+ 0x00b37410, /* unmute mixer nid 0xb beep input and set volume */
+};
+
+AZALIA_ARRAY_SIZES;
diff --git a/src/mainboard/google/slippy/variants/peppy/i915io.c b/src/mainboard/google/slippy/variants/peppy/i915io.c
new file mode 100644
index 0000000..6cf2d0e
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/peppy/i915io.c
@@ -0,0 +1,139 @@
+/*
+* This file is part of the coreboot project.
+*
+* Copyright 2013 Google Inc.
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; version 2 of the License.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+
+#include <stdint.h>
+#include <console/console.h>
+#include <delay.h>
+#include <drivers/intel/gma/i915.h>
+#include <arch/io.h>
+#include <variant/mainboard.h>
+
+void runio(struct intel_dp *dp, int verbose);
+void runio(struct intel_dp *dp, int verbose)
+{
+ u8 read_val;
+ gtt_write(DDI_BUF_CTL_A,
+ DDI_BUF_IS_IDLE|DDI_A_4_LANES|DDI_PORT_WIDTH_X1|DDI_INIT_DISPLAY_DETECTED
+ |0x00000091);
+
+ intel_prepare_ddi();
+
+ gtt_write(BLC_PWM_CPU_CTL,0x03a903a9);
+ gtt_write(BLC_PWM_PCH_CTL2,0x03a903a9);
+ gtt_write(BLC_PWM_PCH_CTL1,0x80000000);
+
+ gtt_write(DEIIR,0x00008000);
+ intel_dp_wait_reg(DEIIR, 0x00000000);
+ gtt_write(DSPSTRIDE(dp->plane), dp->stride);
+ gtt_write(DSPADDR(dp->plane), 0x00000000);
+
+ printk(BIOS_SPEW, "DP_SET_POWER");
+
+ intel_dp_sink_dpms(dp, 0);
+
+ intel_dp_set_m_n_regs(dp);
+
+ intel_dp_get_max_downspread(dp, &read_val);
+
+ intel_dp_set_resolution(dp);
+
+ gtt_write(PIPESRC(dp->pipe),dp->pipesrc);
+ gtt_write(PIPECONF(dp->transcoder),0x00000000);
+ gtt_write(PCH_TRANSCONF(dp->pipe),0x00000000);
+
+ mainboard_set_port_clk_dp(dp);
+
+ gtt_write(DSPSTRIDE(dp->plane),dp->stride);
+ gtt_write(DSPCNTR(dp->plane),DISPLAY_PLANE_ENABLE|DISPPLANE_BGRX888);
+
+ gtt_write(DEIIR,0x00000080);
+ intel_dp_wait_reg(DEIIR, 0x00000000);
+
+ /* There is some reason we removed these three calls from
+ * slippy/gma.c -- I dont remember why!! */
+ gtt_write(PF_WIN_POS(dp->pipe),dp->pfa_pos);
+ gtt_write(PF_CTL(dp->pipe),dp->pfa_ctl);
+ gtt_write(PF_WIN_SZ(dp->pipe),dp->pfa_sz);
+
+ gtt_write(TRANS_DDI_FUNC_CTL_EDP,dp->flags);
+ gtt_write(PIPECONF(dp->transcoder),PIPECONF_ENABLE|PIPECONF_DITHER_EN);
+
+ /* what is this doing? Not sure yet. But we don't seem to be
+ * able to live without it.*/
+ intel_dp_i2c_write(dp, 0x0);
+ intel_dp_i2c_read(dp, &read_val);
+ intel_dp_i2c_write(dp, 0x04);
+ intel_dp_i2c_read(dp, &read_val);
+ intel_dp_i2c_write(dp, 0x7e);
+ intel_dp_i2c_read(dp, &read_val);
+
+ gtt_write(DDI_BUF_CTL_A,
+ DDI_BUF_IS_IDLE|
+ DDI_A_4_LANES|DDI_PORT_WIDTH_X1|DDI_INIT_DISPLAY_DETECTED
+ |0x00000091);
+
+ gtt_write(TRANS_DDI_FUNC_CTL_EDP+0x10,0x00000001);
+ gtt_write(DP_TP_CTL(dp->port),DP_TP_CTL_ENABLE |
+ DP_TP_CTL_ENHANCED_FRAME_ENABLE);
+
+ gtt_write(DDI_BUF_CTL_A,
+ DDI_BUF_CTL_ENABLE|
+ /* another undocumented setting. Surprised? */ 0x40000 |
+ DDI_BUF_IS_IDLE|DDI_A_4_LANES|
+ DDI_PORT_WIDTH_X1|DDI_INIT_DISPLAY_DETECTED|
+ 0x80040091);
+
+ intel_dp_set_bw(dp);
+
+ intel_dp_set_lane_count(dp);
+
+ mainboard_train_link(dp);
+
+ gtt_write(DP_TP_CTL(dp->port),
+ DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE |
+ DP_TP_CTL_LINK_TRAIN_IDLE);
+
+ gtt_write(DP_TP_CTL(dp->port),
+ DP_TP_CTL_ENABLE | DP_TP_CTL_ENHANCED_FRAME_ENABLE |
+ DP_TP_CTL_LINK_TRAIN_NORMAL);
+
+ gtt_write(BLC_PWM_CPU_CTL,0x03a903a9);
+ gtt_write(BLC_PWM_PCH_CTL2,0x03a903a9);
+ gtt_write(BLC_PWM_PCH_CTL1,0x80000000);
+
+ /* some of this is not needed. But with a total lack of docs, well ...*/
+ gtt_write(DIGITAL_PORT_HOTPLUG_CNTRL, DIGITAL_PORTA_HOTPLUG_ENABLE );
+
+ gtt_write(SDEIIR,0x00000000);
+ gtt_write(DEIIR,0x00000000);
+ gtt_write(DEIIR,0x00008000);
+ intel_dp_wait_reg(DEIIR, 0x00000000);
+
+ gtt_write(DSPSTRIDE(dp->plane),dp->stride);
+ gtt_write(PIPESRC(dp->pipe),dp->pipesrc);
+
+ gtt_write(DEIIR,0x00000080);
+ intel_dp_wait_reg(DEIIR, 0x00000000);
+
+ gtt_write(DSPSTRIDE(dp->plane),dp->stride);
+ gtt_write(DSPCNTR(dp->plane),DISPLAY_PLANE_ENABLE | DISPPLANE_BGRX888);
+
+ gtt_write(PCH_PP_CONTROL,EDP_BLC_ENABLE | EDP_BLC_ENABLE | PANEL_POWER_ON);
+
+ gtt_write(SDEIIR,0x00000000);
+ gtt_write(SDEIIR,0x00000000);
+ gtt_write(DEIIR,0x00000000);
+
+}
diff --git a/src/mainboard/google/slippy/variants/peppy/include/variant/acpi/mainboard.asl b/src/mainboard/google/slippy/variants/peppy/include/variant/acpi/mainboard.asl
new file mode 100644
index 0000000..cc0c688
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/peppy/include/variant/acpi/mainboard.asl
@@ -0,0 +1,172 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <onboard.h>
+
+Scope (\_SB)
+{
+ Device (LID0)
+ {
+ Name(_HID, EisaId("PNP0C0D"))
+ Method(_LID, 0)
+ {
+ Store (\_SB.PCI0.LPCB.EC0.LIDS, \LIDS)
+ Return (\LIDS)
+ }
+ }
+
+ Device (PWRB)
+ {
+ Name(_HID, EisaId("PNP0C0C"))
+ }
+}
+
+Scope (\_SB.PCI0.I2C0)
+{
+ Device (ETPA)
+ {
+ Name (_HID, "ELAN0000")
+ Name (_DDN, "Elan Touchpad")
+ Name (_UID, 1)
+ Name (ISTP, 1) // Touchpad
+
+ Name (_CRS, ResourceTemplate()
+ {
+ I2cSerialBus (
+ 0x15, // SlaveAddress
+ ControllerInitiated, // SlaveMode
+ 400000, // ConnectionSpeed
+ AddressingMode7Bit, // AddressingMode
+ "\\_SB.PCI0.I2C0" // ResourceSource
+ )
+ Interrupt (ResourceConsumer, Level, ActiveLow)
+ {
+ BOARD_TRACKPAD_IRQ
+ }
+ })
+
+ Method (_STA)
+ {
+ If (LEqual (\S1EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ Name (_PRW, Package() { BOARD_TRACKPAD_WAKE_GPIO, 0x3 })
+
+ Method (_DSW, 3, NotSerialized)
+ {
+ Store (BOARD_TRACKPAD_WAKE_GPIO, Local0)
+ If (LEqual (Arg0, 1)) {
+ // Enable GPIO as wake source
+ \_SB.PCI0.LPCB.GWAK (Local0)
+ }
+ }
+ }
+ Device (CTPA)
+ {
+ Name (_HID, "CYAP0000")
+ Name (_DDN, "Cypress Touchpad")
+ Name (_UID, 3)
+ Name (ISTP, 1) // Touchpad
+
+ Name (_CRS, ResourceTemplate()
+ {
+ I2cSerialBus (
+ 0x67, // SlaveAddress
+ ControllerInitiated, // SlaveMode
+ 400000, // ConnectionSpeed
+ AddressingMode7Bit, // AddressingMode
+ "\\_SB.PCI0.I2C0" // ResourceSource
+ )
+ Interrupt (ResourceConsumer, Edge, ActiveLow)
+ {
+ BOARD_TRACKPAD_IRQ
+ }
+ })
+
+ Method (_STA)
+ {
+ If (LEqual (\S1EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ Name (_PRW, Package() { BOARD_TRACKPAD_WAKE_GPIO, 0x3 })
+
+ Method (_DSW, 3, NotSerialized)
+ {
+ Store (BOARD_TRACKPAD_WAKE_GPIO, Local0)
+ If (LEqual (Arg0, 1)) {
+ // Enable GPIO as wake source
+ \_SB.PCI0.LPCB.GWAK (Local0)
+ }
+ }
+
+ // Allow device to power off in S0
+ Name (_S0W, 4)
+ }
+}
+Scope (\_SB.PCI0.I2C1)
+{
+ Device (ATSA)
+ {
+ Name (_HID, "ATML0001")
+ Name (_DDN, "Atmel Touchscreen")
+ Name (_UID, 5)
+ Name (_S0W, 4)
+ Name (ISTP, 0) /* TouchScreen */
+ Name (GPIO, 25)
+ Name (_CRS, ResourceTemplate()
+ {
+ I2cSerialBus (
+ 0x4a, // SlaveAddress
+ ControllerInitiated, // SlaveMode
+ 400000, // ConnectionSpeed
+ AddressingMode7Bit, // AddressingMode
+ "\\_SB.PCI0.I2C1" // ResourceSource
+ )
+
+ // GPIO54 (ball L3) is PIRQW: PIRQL_GSI + PIRQL - PIRQW = PIRQW_GSI
+ // 27 + 3 - 14 = 38
+ Interrupt (ResourceConsumer, Edge, ActiveLow) { 38 }
+ })
+
+ Name (_PRW, Package() { BOARD_TOUCHSCREEN_WAKE_GPIO, 0x3 })
+
+ Method (_DSW, 3, NotSerialized)
+ {
+ Store (BOARD_TOUCHSCREEN_WAKE_GPIO, Local0)
+ If (LEqual (Arg0, 1)) {
+ // Enable GPIO as wake source
+ \_SB.PCI0.LPCB.GWAK (Local0)
+ }
+ }
+
+ Method (_STA)
+ {
+ If (LEqual (\S2EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+ }
+}
\ No newline at end of file
diff --git a/src/mainboard/google/slippy/variants/peppy/include/variant/gpio.h b/src/mainboard/google/slippy/variants/peppy/include/variant/gpio.h
new file mode 100644
index 0000000..8eb3da9
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/peppy/include/variant/gpio.h
@@ -0,0 +1,120 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef PEPPY_GPIO_H
+#define PEPPY_GPIO_H
+
+struct pch_lp_gpio_map;
+
+const struct pch_lp_gpio_map mainboard_gpio_map[] = {
+ LP_GPIO_UNUSED, /* 0: UNUSED */
+ LP_GPIO_UNUSED, /* 1: UNUSED */
+ LP_GPIO_UNUSED, /* 2: UNUSED */
+ LP_GPIO_UNUSED, /* 3: UNUSED */
+ LP_GPIO_NATIVE, /* 4: NATIVE: I2C0_SDA_GPIO4 */
+ LP_GPIO_NATIVE, /* 5: NATIVE: I2C0_SCL_GPIO5 */
+ LP_GPIO_NATIVE, /* 6: NATIVE: I2C1_SDA_GPIO6 */
+ LP_GPIO_NATIVE, /* 7: NATIVE: I2C1_SCL_GPIO7 */
+ LP_GPIO_ACPI_SCI, /* 8: LTE_WAKE_L_Q */
+ LP_GPIO_INPUT, /* 9: RAM_ID1 */
+ LP_GPIO_ACPI_SCI, /* 10: WLAN_WAKE_L_Q */
+ LP_GPIO_UNUSED, /* 11: UNUSED */
+ LP_GPIO_INPUT_INVERT, /* 12: TRACKPAD_INT_L (WAKE) */
+ LP_GPIO_INPUT, /* 13: RAM_ID0 */
+ LP_GPIO_INPUT, /* 14: EC_IN_RW */
+ LP_GPIO_UNUSED, /* 15: UNUSED (STRAP) */
+ LP_GPIO_UNUSED, /* 16: UNUSED */
+ LP_GPIO_UNUSED, /* 17: UNUSED */
+ LP_GPIO_NATIVE, /* 18: PCIE_CLKREQ_WLAN# */
+ LP_GPIO_UNUSED, /* 19: UNUSED */
+ LP_GPIO_UNUSED, /* 20: UNUSED */
+ LP_GPIO_UNUSED, /* 21: UNUSED */
+ LP_GPIO_UNUSED, /* 22: UNUSED */
+ LP_GPIO_UNUSED, /* 23: UNUSED */
+ LP_GPIO_UNUSED, /* 24: UNUSED */
+ LP_GPIO_INPUT_INVERT, /* 25: TOUCH_INT_L (WAKE) */
+ LP_GPIO_UNUSED, /* 26: UNUSED */
+ LP_GPIO_UNUSED, /* 27: UNUSED */
+ LP_GPIO_UNUSED, /* 28: UNUSED */
+ LP_GPIO_UNUSED, /* 29: UNUSED */
+ LP_GPIO_NATIVE, /* 30: NATIVE: PCH_SUSWARN_L */
+ LP_GPIO_NATIVE, /* 31: NATIVE: ACPRESENT */
+ LP_GPIO_NATIVE, /* 32: NATIVE: LPC_CLKRUN_L */
+ LP_GPIO_NATIVE, /* 33: NATIVE: DEVSLP0 */
+ LP_GPIO_ACPI_SMI, /* 34: EC_SMI_L */
+ LP_GPIO_ACPI_SMI, /* 35: PCH_NMI_DBG_L (route in NMI_EN) */
+ LP_GPIO_ACPI_SCI, /* 36: EC_SCI_L */
+ LP_GPIO_UNUSED, /* 37: UNUSED */
+ LP_GPIO_UNUSED, /* 38: UNUSED */
+ LP_GPIO_UNUSED, /* 39: UNUSED */
+ LP_GPIO_NATIVE, /* 40: NATIVE: USB_OC0# */
+ LP_GPIO_UNUSED, /* 41: UNUSED */
+ LP_GPIO_NATIVE, /* 42: NATIVE: USB_OC2# */
+ LP_GPIO_UNUSED, /* 43: UNUSED */
+ LP_GPIO_OUT_HIGH, /* 44: PP3300_SSD_EN */
+ LP_GPIO_OUT_HIGH, /* 45: PP3300_CODEC_EN */
+ LP_GPIO_OUT_HIGH, /* 46: WLAN_DISABLE_L */
+ LP_GPIO_INPUT, /* 47: RAM_ID2 */
+ LP_GPIO_UNUSED, /* 48: UNUSED */
+ LP_GPIO_UNUSED, /* 49: UNUSED */
+ LP_GPIO_UNUSED, /* 50: UNUSED */
+ LP_GPIO_INPUT, /* 51: ALS_INT_L */
+ LP_GPIO_INPUT, /* 52: SIM_DET */
+ LP_GPIO_PIRQ, /* 53: TRACKPAD_INT_DX */
+ LP_GPIO_PIRQ, /* 54: TOUCH_INT_L_DX */
+ LP_GPIO_UNUSED, /* 55: UNUSED */
+ LP_GPIO_UNUSED, /* 56: UNUSED */
+ LP_GPIO_OUT_HIGH, /* 57: PP3300_CCD_EN */
+ LP_GPIO_INPUT, /* 58: PCH_SPI_WP_D */
+ LP_GPIO_OUT_HIGH, /* 59: LTE_DISABLE_L */
+ LP_GPIO_NATIVE, /* 60: NATIVE: SML0ALERT */
+ LP_GPIO_UNUSED, /* 61: UNUSED */
+ LP_GPIO_UNUSED, /* 62: UNUSED */
+ LP_GPIO_NATIVE, /* 63: NATIVE: PCH_SLP_S5_L */
+ LP_GPIO_UNUSED, /* 64: UNUSED */
+ LP_GPIO_UNUSED, /* 65: UNUSED */
+ LP_GPIO_UNUSED, /* 66: UNUSED (STRAP) */
+ LP_GPIO_UNUSED, /* 67: UNUSED */
+ LP_GPIO_UNUSED, /* 68: UNUSED */
+ LP_GPIO_UNUSED, /* 69: UNUSED */
+ LP_GPIO_UNUSED, /* 70: UNUSED */
+ LP_GPIO_NATIVE, /* 71: NATIVE: MODPHY_EN */
+ LP_GPIO_NATIVE, /* 72: NATIVE: PCH_BATLOW# */
+ LP_GPIO_NATIVE, /* 73: NATIVE: SMB1ALERT# */
+ LP_GPIO_NATIVE, /* 74: NATIVE: SMB_ME1_DAT */
+ LP_GPIO_NATIVE, /* 75: NATIVE: SMB_ME1_CLK */
+ LP_GPIO_UNUSED, /* 76: UNUSED */
+ LP_GPIO_UNUSED, /* 77: UNUSED */
+ LP_GPIO_UNUSED, /* 78: UNUSED */
+ LP_GPIO_UNUSED, /* 79: UNUSED */
+ LP_GPIO_UNUSED, /* 80: UNUSED */
+ LP_GPIO_NATIVE, /* 81: NATIVE: SPKR */
+ LP_GPIO_NATIVE, /* 82: NATIVE: EC_RCIN_L */
+ LP_GPIO_UNUSED, /* 83: UNUSED */
+ LP_GPIO_UNUSED, /* 84: UNUSED */
+ LP_GPIO_UNUSED, /* 85: UNUSED */
+ LP_GPIO_UNUSED, /* 86: UNUSED (STRAP) */
+ LP_GPIO_UNUSED, /* 87: UNUSED */
+ LP_GPIO_UNUSED, /* 88: UNUSED */
+ LP_GPIO_UNUSED, /* 89: UNUSED */
+ LP_GPIO_UNUSED, /* 90: UNUSED */
+ LP_GPIO_UNUSED, /* 91: UNUSED */
+ LP_GPIO_UNUSED, /* 92: UNUSED */
+ LP_GPIO_UNUSED, /* 93: UNUSED */
+ LP_GPIO_UNUSED, /* 94: UNUSED */
+ LP_GPIO_END
+};
+
+#endif
diff --git a/src/mainboard/google/slippy/variants/peppy/include/variant/mainboard.h b/src/mainboard/google/slippy/variants/peppy/include/variant/mainboard.h
new file mode 100644
index 0000000..6329a27
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/peppy/include/variant/mainboard.h
@@ -0,0 +1,21 @@
+/*
+* This file is part of the coreboot project.
+*
+* Copyright 2013 Google Inc.
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; version 2 of the License.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+
+#ifndef __MAINBOARD_H_
+#define __MAINBOARD_H_
+void mainboard_train_link(struct intel_dp *intel_dp);
+void mainboard_set_port_clk_dp(struct intel_dp *intel_dp);
+
+#endif
diff --git a/src/mainboard/google/slippy/variants/peppy/romstage.c b/src/mainboard/google/slippy/variants/peppy/romstage.c
new file mode 100644
index 0000000..4a39101
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/peppy/romstage.c
@@ -0,0 +1,184 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <delay.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <cbfs.h>
+#include <console/console.h>
+#include <cpu/intel/haswell/haswell.h>
+#include "ec/google/chromeec/ec.h"
+#include <northbridge/intel/haswell/haswell.h>
+#include <northbridge/intel/haswell/raminit.h>
+#include <southbridge/intel/lynxpoint/pch.h>
+#include <southbridge/intel/lynxpoint/lp_gpio.h>
+#include <variant/gpio.h>
+#include "../../onboard.h"
+#include "../../variant.h"
+
+const struct rcba_config_instruction rcba_config[] = {
+
+ /*
+ * GFX INTA -> PIRQA (MSI)
+ * D28IP_P1IP PCIE INTA -> PIRQA
+ * D29IP_E1P EHCI INTA -> PIRQD
+ * D20IP_XHCI XHCI INTA -> PIRQC (MSI)
+ * D31IP_SIP SATA INTA -> PIRQF (MSI)
+ * D31IP_SMIP SMBUS INTB -> PIRQG
+ * D31IP_TTIP THRT INTC -> PIRQA
+ * D27IP_ZIP HDA INTA -> PIRQG (MSI)
+ */
+
+ /* Device interrupt pin register (board specific) */
+ RCBA_SET_REG_32(D31IP, (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
+ (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)),
+ RCBA_SET_REG_32(D29IP, (INTA << D29IP_E1P)),
+ RCBA_SET_REG_32(D28IP, (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) |
+ (INTB << D28IP_P4IP)),
+ RCBA_SET_REG_32(D27IP, (INTA << D27IP_ZIP)),
+ RCBA_SET_REG_32(D26IP, (INTA << D26IP_E2P)),
+ RCBA_SET_REG_32(D22IP, (NOINT << D22IP_MEI1IP)),
+ RCBA_SET_REG_32(D20IP, (INTA << D20IP_XHCI)),
+
+ /* Device interrupt route registers */
+ RCBA_SET_REG_32(D31IR, DIR_ROUTE(PIRQG, PIRQC, PIRQB, PIRQA)),/* LPC */
+ RCBA_SET_REG_32(D29IR, DIR_ROUTE(PIRQD, PIRQD, PIRQD, PIRQD)),/* EHCI */
+ RCBA_SET_REG_32(D28IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),/* PCIE */
+ RCBA_SET_REG_32(D27IR, DIR_ROUTE(PIRQG, PIRQG, PIRQG, PIRQG)),/* HDA */
+ RCBA_SET_REG_32(D22IR, DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA)),/* ME */
+ RCBA_SET_REG_32(D21IR, DIR_ROUTE(PIRQE, PIRQF, PIRQF, PIRQF)),/* SIO */
+ RCBA_SET_REG_32(D20IR, DIR_ROUTE(PIRQC, PIRQC, PIRQC, PIRQC)),/* XHCI */
+ RCBA_SET_REG_32(D23IR, DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH)),/* SDIO */
+
+ /* Disable unused devices (board specific) */
+ RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS),
+
+ RCBA_END_CONFIG,
+};
+
+/* Copy SPD data for on-board memory */
+static void copy_spd(struct pei_data *peid)
+{
+ const int gpio_vector[] = {13, 9, 47, -1};
+ int spd_index = get_gpios(gpio_vector);
+ char *spd_file;
+ size_t spd_file_len;
+
+ printk(BIOS_DEBUG, "SPD index %d\n", spd_index);
+ spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD,
+ &spd_file_len);
+ if (!spd_file)
+ die("SPD data not found.");
+
+ switch (google_chromeec_get_board_version()) {
+ case PEPPY_BOARD_VERSION_PROTO:
+ /* Index 0 is 2GB config with CH0 only. */
+ if (spd_index == 0)
+ peid->dimm_channel1_disabled = 3;
+ break;
+
+ case PEPPY_BOARD_VERSION_EVT:
+ default:
+ /* Index 0-2 are 4GB config with both CH0 and CH1.
+ * Index 4-6 are 2GB config with CH0 only. */
+ if (spd_index > 3)
+ peid->dimm_channel1_disabled = 3;
+ break;
+ }
+
+ if (spd_file_len <
+ ((spd_index + 1) * sizeof(peid->spd_data[0]))) {
+ printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n");
+ spd_index = 0;
+ }
+
+ if (spd_file_len < sizeof(peid->spd_data[0]))
+ die("Missing SPD data.");
+
+ memcpy(peid->spd_data[0],
+ spd_file +
+ spd_index * sizeof(peid->spd_data[0]),
+ sizeof(peid->spd_data[0]));
+}
+
+void variant_romstage_entry(unsigned long bist)
+{
+ struct pei_data pei_data = {
+ .pei_version = PEI_VERSION,
+ .mchbar = (uintptr_t)DEFAULT_MCHBAR,
+ .dmibar = (uintptr_t)DEFAULT_DMIBAR,
+ .epbar = DEFAULT_EPBAR,
+ .pciexbar = DEFAULT_PCIEXBAR,
+ .smbusbar = SMBUS_IO_BASE,
+ .wdbbar = 0x4000000,
+ .wdbsize = 0x1000,
+ .hpet_address = HPET_ADDR,
+ .rcba = (uintptr_t)DEFAULT_RCBA,
+ .pmbase = DEFAULT_PMBASE,
+ .gpiobase = DEFAULT_GPIOBASE,
+ .temp_mmio_base = 0xfed08000,
+ .system_type = 5, /* ULT */
+ .tseg_size = CONFIG_SMM_TSEG_SIZE,
+ .spd_addresses = { 0xff, 0x00, 0xff, 0x00 },
+ .ec_present = 1,
+ // 0 = leave channel enabled
+ // 1 = disable dimm 0 on channel
+ // 2 = disable dimm 1 on channel
+ // 3 = disable dimm 0+1 on channel
+ .dimm_channel0_disabled = 2,
+ .dimm_channel1_disabled = 2,
+ .max_ddr3_freq = 1600,
+ .usb_xhci_on_resume = 1,
+ .usb2_ports = {
+ /* Length, Enable, OCn#, Location */
+ { 0x0150, 1, USB_OC_PIN_SKIP, /* P0: LTE */
+ USB_PORT_MINI_PCIE },
+ { 0x0040, 1, 0, /* P1: Port A, CN10 */
+ USB_PORT_BACK_PANEL },
+ { 0x0080, 1, USB_OC_PIN_SKIP, /* P2: CCD */
+ USB_PORT_INTERNAL },
+ { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */
+ USB_PORT_MINI_PCIE },
+ { 0x0040, 1, 2, /* P4: Port B, CN6 */
+ USB_PORT_BACK_PANEL },
+ { 0x0000, 0, USB_OC_PIN_SKIP, /* P5: EMPTY */
+ USB_PORT_SKIP },
+ { 0x0150, 1, USB_OC_PIN_SKIP, /* P6: SD Card */
+ USB_PORT_FLEX },
+ { 0x0000, 0, USB_OC_PIN_SKIP, /* P7: EMPTY */
+ USB_PORT_SKIP },
+ },
+ .usb3_ports = {
+ /* Enable, OCn# */
+ { 1, 0 }, /* P1; Port A, CN6 */
+ { 0, USB_OC_PIN_SKIP }, /* P2; */
+ { 0, USB_OC_PIN_SKIP }, /* P3; */
+ { 0, USB_OC_PIN_SKIP }, /* P4; */
+ },
+ };
+
+ struct romstage_params romstage_params = {
+ .pei_data = &pei_data,
+ .gpio_map = &mainboard_gpio_map,
+ .rcba_config = &rcba_config[0],
+ .bist = bist,
+ .copy_spd = copy_spd,
+ };
+
+ /* Call into the real romstage main with this board's attributes. */
+ romstage_common(&romstage_params);
+}
diff --git a/src/mainboard/google/slippy/variants/peppy/spd/Elpida_EDJ4216EFBG.spd.hex b/src/mainboard/google/slippy/variants/peppy/spd/Elpida_EDJ4216EFBG.spd.hex
new file mode 100644
index 0000000..eb41f0b
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/peppy/spd/Elpida_EDJ4216EFBG.spd.hex
@@ -0,0 +1,17 @@
+# Elpida EDJ4216EFBG-GN-F
+92 12 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00
+69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 81
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 02 FE 00 00 00 00 00 00 00 A1 CE
+45 44 4A 34 32 31 36 45 46 42 47 2D 47 4E 2D 46
+00 00 00 00 02 FE 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
diff --git a/src/mainboard/google/slippy/variants/peppy/spd/Hynix_HMT425S6AFR6A.spd.hex b/src/mainboard/google/slippy/variants/peppy/spd/Hynix_HMT425S6AFR6A.spd.hex
new file mode 100644
index 0000000..7b09327
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/peppy/spd/Hynix_HMT425S6AFR6A.spd.hex
@@ -0,0 +1,17 @@
+# Hynix HMT425S6AFR6A-PBA
+92 12 0B 03 04 19 02 02 03 52 01 08 0A 00 FE 00
+69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 01
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 0F 11 62 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 80 AD 01 00 00 00 00 00 00 FF AB
+48 4D 54 34 32 35 53 36 41 46 52 36 41 2D 50 42
+20 20 4E 30 80 AD 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
diff --git a/src/mainboard/google/slippy/variants/peppy/spd/Micron_4KTF25664HZ.spd.hex b/src/mainboard/google/slippy/variants/peppy/spd/Micron_4KTF25664HZ.spd.hex
new file mode 100644
index 0000000..cbe9e4f
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/peppy/spd/Micron_4KTF25664HZ.spd.hex
@@ -0,0 +1,17 @@
+# Micron 4KTF25664HZ-1G6E1
+92 11 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00
+69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 05
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 0F 01 02 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 80 2C 00 00 00 00 00 00 00 AD 75
+34 4B 54 46 32 35 36 36 34 48 5A 2D 31 47 36 45
+31 20 45 31 80 2C 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
diff --git a/src/mainboard/google/slippy/variants/wolf/Makefile.inc b/src/mainboard/google/slippy/variants/wolf/Makefile.inc
new file mode 100644
index 0000000..0c860bf
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/wolf/Makefile.inc
@@ -0,0 +1,39 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2012 Google Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+## DIMM SPD for on-board memory
+SPD_BIN = $(obj)/spd.bin
+
+# Order of names in SPD_SOURCES is important!
+SPD_SOURCES = Micron_4KTF25664HZ # 0: 4GB / CH0 + CH1
+SPD_SOURCES += Hynix_HMT425S6AFR6A # 1: 4GB / CH0 + CH1
+SPD_SOURCES += Samsung_K4B4G1646B # 2: 4GB / CH0 + CH1
+SPD_SOURCES += Micron_4KTF25664HZ # 3: 2GB / CH0
+SPD_SOURCES += Hynix_HMT425S6AFR6A # 4: 2GB / CH0
+SPD_SOURCES += Samsung_K4B4G1646B # 4: 2GB / CH0
+
+SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/spd/$(f).spd.hex)
+
+# Include spd rom data
+$(SPD_BIN): $(SPD_DEPS)
+ for f in $+; \
+ do for c in $$(cat $$f | grep -v ^#); \
+ do printf $$(printf '\%o' 0x$$c); \
+ done; \
+ done > $@
+
+cbfs-files-y += spd.bin
+spd.bin-file := $(SPD_BIN)
+spd.bin-type := spd
diff --git a/src/mainboard/google/slippy/variants/wolf/devicetree.cb b/src/mainboard/google/slippy/variants/wolf/devicetree.cb
new file mode 100644
index 0000000..7655c41
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/wolf/devicetree.cb
@@ -0,0 +1,130 @@
+chip northbridge/intel/haswell
+ # IGD Displays
+ register "gfx.ndid" = "3"
+ register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
+
+ # Enable eDP Hotplug with 6ms pulse
+ register "gpu_dp_d_hotplug" = "0x06"
+
+ # Disable DisplayPort C Hotplug
+ register "gpu_dp_c_hotplug" = "0x00"
+
+ # Enable HDMI Hotplug with 6ms pulse
+ register "gpu_dp_b_hotplug" = "0x06"
+
+ # Set backlight PWM values for eDP
+ register "gpu_cpu_backlight" = "0x00000200"
+ register "gpu_pch_backlight" = "0x04000000"
+
+ # Enable Panel and configure power delays
+ register "gpu_panel_port_select" = "1" # eDP
+ register "gpu_panel_power_cycle_delay" = "6" # 500ms (T11+T12)
+ register "gpu_panel_power_up_delay" = "2000" # 200ms (T3)
+ register "gpu_panel_power_down_delay" = "500" # 50ms (T10)
+ register "gpu_panel_power_backlight_on_delay" = "10" # 1ms (T8)
+ register "gpu_panel_power_backlight_off_delay" = "2000" # 200ms (T9)
+
+ device cpu_cluster 0 on
+ chip cpu/intel/haswell
+ device lapic 0 on end
+ # Magic APIC ID to locate this chip
+ device lapic 0xACAC off end
+
+ register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E)
+ register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3)
+ register "c3_battery" = "9" # ACPI(C3) = MWAIT(C7S)
+
+ register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E)
+ register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3)
+ register "c3_acpower" = "9" # ACPI(C3) = MWAIT(C7S)
+ end
+ end
+
+ device domain 0 on
+ device pci 00.0 on end # host bridge
+ device pci 02.0 on end # vga controller
+ device pci 03.0 on end # mini-hd audio
+
+ chip southbridge/intel/lynxpoint
+ register "pirqa_routing" = "0x8b"
+ register "pirqb_routing" = "0x8a"
+ register "pirqc_routing" = "0x8b"
+ register "pirqd_routing" = "0x8b"
+ register "pirqe_routing" = "0x80"
+ register "pirqf_routing" = "0x80"
+ register "pirqg_routing" = "0x80"
+ register "pirqh_routing" = "0x80"
+
+ # EC range is 0x800-0x9ff
+ register "gen1_dec" = "0x00fc0801"
+ register "gen2_dec" = "0x00fc0901"
+
+ # EC_SMI is GPIO34
+ register "alt_gp_smi_en" = "0x0004"
+ register "gpe0_en_1" = "0x00000000"
+ # EC_SCI is GPIO36
+ register "gpe0_en_2" = "0x00000010"
+ register "gpe0_en_3" = "0x00000000"
+ register "gpe0_en_4" = "0x00000000"
+
+ register "ide_legacy_combined" = "0x0"
+ register "sata_ahci" = "0x1"
+ register "sata_port_map" = "0x1"
+ register "sata_devslp_disable" = "0x1"
+
+ # DTLE DATA / EDGE values
+ register "sata_port0_gen3_dtle" = "0x5"
+ register "sata_port1_gen3_dtle" = "0x5"
+
+ register "sio_acpi_mode" = "1"
+ register "sio_i2c0_voltage" = "0" # 3.3V
+ register "sio_i2c1_voltage" = "0" # 3.3V
+
+ # Force enable ASPM for PCIe Port 1
+ register "pcie_port_force_aspm" = "0x01"
+
+ # Route all USB ports to XHCI per default
+ register "xhci_default" = "1"
+
+ # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP
+ register "icc_clock_disable" = "0x013c0000"
+
+ device pci 13.0 off end # Smart Sound Audio DSP
+ device pci 14.0 on end # USB3 XHCI
+ device pci 15.0 on end # Serial I/O DMA
+ device pci 15.1 on end # I2C0
+ device pci 15.2 on end # I2C1
+ device pci 15.3 off end # GSPI0
+ device pci 15.4 off end # GSPI1
+ device pci 15.5 off end # UART0
+ device pci 15.6 off end # UART1
+ device pci 16.0 on end # Management Engine Interface 1
+ device pci 16.1 off end # Management Engine Interface 2
+ device pci 16.2 off end # Management Engine IDE-R
+ device pci 16.3 off end # Management Engine KT
+ device pci 17.0 off end # SDIO
+ device pci 19.0 off end # GbE
+ device pci 1b.0 on end # High Definition Audio
+ device pci 1c.0 on end # PCIe Port #1
+ device pci 1c.1 off end # PCIe Port #2
+ device pci 1c.2 off end # PCIe Port #3
+ device pci 1c.3 off end # PCIe Port #4
+ device pci 1c.4 off end # PCIe Port #5
+ device pci 1c.5 off end # PCIe Port #6
+ device pci 1d.0 on end # USB2 EHCI
+ device pci 1e.0 off end # PCI bridge
+ device pci 1f.0 on
+ chip ec/google/chromeec
+ # We only have one init function that
+ # we need to call to initialize the
+ # keyboard part of the EC.
+ device pnp ff.1 on # dummy address
+ end
+ end
+ end # LPC bridge
+ device pci 1f.2 on end # SATA Controller
+ device pci 1f.3 on end # SMBus
+ device pci 1f.6 on end # Thermal
+ end
+ end
+end
diff --git a/src/mainboard/google/slippy/variants/wolf/hda_verb.c b/src/mainboard/google/slippy/variants/wolf/hda_verb.c
new file mode 100644
index 0000000..b043bf5
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/wolf/hda_verb.c
@@ -0,0 +1,112 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <device/azalia_device.h>
+
+const u32 cim_verb_data[] = {
+ /* coreboot specific header */
+ 0x10ec0283, // Codec Vendor / Device ID: Realtek ALC283
+ 0x10ec0283, // Subsystem ID
+ 0x0000000e, // Number of jacks (NID entries)
+
+ 0x0017ff00, // Function Reset
+ 0x0017ff00, // Double Function Reset
+ 0x000F0000, // Pad - get vendor id
+ 0x000F0002, // Pad - get revision id
+
+ /* Bits 31:28 - Codec Address */
+ /* Bits 27:20 - NID */
+ /* Bits 19:8 - Verb ID */
+ /* Bits 7:0 - Payload */
+
+ /* NID 0x01, HDA Codec Subsystem ID Verb Table */
+ AZALIA_SUBVENDOR(0x0, 0x11790670),
+
+ /* Pin Widget Verb Table */
+
+ /* Pin Complex (NID 0x12) DMIC - interior mobile lid */
+ AZALIA_PIN_CFG(0x0, 0x12, 0xb7a61010),
+
+ /* Pin Complex (NID 0x14) SPKR-OUT - Internal Speakers */
+ // group 1, cap 0
+ // no connector, no jack detect
+ // speaker out, analog
+ // fixed function, internal, Location N/A
+ AZALIA_PIN_CFG(0x0, 0x14, 0x90170110),
+
+ /* Pin Complex (NID 0x17) MONO Out - Disabled */
+ AZALIA_PIN_CFG(0x0, 0x17, 0x411111f0),
+
+ /* Pin Complex (NID 0x18) MIC1 PORTB - Disabled */
+ AZALIA_PIN_CFG(0x0, 0x18, 0x411111f0),
+
+ /* Pin Complex (NID 0x19) MIC2 - 3.5mm Jack */
+ // group2, cap 0
+ // black, jack detect
+ // Mic in, 3.5mm Jack
+ // connector, External left panel
+ AZALIA_PIN_CFG(0x0, 0x19, 0x03a11020),
+
+ /* Pin Complex (NID 0x1A) LINE1 - Internal Mic */
+ // group 1, cap 1
+ // no connector, no jack detect
+ // mic in, analog connection
+ // Fixed function, internal, Location N/A
+ AZALIA_PIN_CFG(0x0, 0x1a, 0x90a70111),
+
+ /* Pin Complex (NID 0x1B) LINE2 - Disabled */
+ AZALIA_PIN_CFG(0x0, 0x1b, 0x411111f0),
+
+ /* Pin Complex (NID 0x1D) PCBeep */
+ // eapd low on ex-amp, laptop, custom enable
+ // mute spkr on hpout
+ // pcbeep en able, checksum
+ // no physical, Internal, Location N/A
+ AZALIA_PIN_CFG(0x0, 0x1d, 0x4015812d),
+
+ /* Pin Complex (NID 0x1E) SPDIF-OUT - Disabled*/
+ AZALIA_PIN_CFG(0x0, 0x1e, 0x411111f0),
+
+ /* Pin Complex (NID 0x21) HP-OUT - 3.5mm Jack*/
+ // group2, cap 1
+ // black, jack detect
+ // HPOut, 3.5mm Jack
+ // connector, left panel
+ AZALIA_PIN_CFG(0x0, 0x21, 0x03211021),
+
+ /* Undocumented settings from Realtek (needed for beep_gen) */
+ /* Widget node 0x20 */
+ 0x02050010,
+ 0x02040c20,
+ 0x0205001b,
+ 0x0204081b,
+
+ /* Tuned jack detection */
+ 0x02050043,
+ 0x0204A614,
+ 0x02050047,
+ 0x02049470,
+};
+
+const u32 pc_beep_verbs[] = {
+ 0x00170500, /* power up everything (codec, dac, adc, mixers) */
+ 0x01470740, /* enable speaker out */
+ 0x01470c02, /* set speaker EAPD pin */
+ 0x0143b01f, /* unmute speaker */
+ 0x00c37100, /* unmute mixer nid 0xc input 1 */
+ 0x00b37410, /* unmute mixer nid 0xb beep input and set volume */
+};
+
+AZALIA_ARRAY_SIZES;
diff --git a/src/mainboard/google/slippy/variants/wolf/include/variant/acpi/mainboard.asl b/src/mainboard/google/slippy/variants/wolf/include/variant/acpi/mainboard.asl
new file mode 100644
index 0000000..335077c
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/wolf/include/variant/acpi/mainboard.asl
@@ -0,0 +1,88 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <onboard.h>
+
+Scope (\_SB)
+{
+ Device (LID0)
+ {
+ Name(_HID, EisaId("PNP0C0D"))
+ Method(_LID, 0)
+ {
+ Store (\_SB.PCI0.LPCB.EC0.LIDS, \LIDS)
+ Return (\LIDS)
+ }
+
+ // There is no GPIO for LID, the EC pulses WAKE# pin instead.
+ // There is no GPE for WAKE#, so fake it with PCI_EXP_WAKE
+ Name (_PRW, Package(){ 0x69, 5 }) // PCI_EXP
+ }
+
+ Device (PWRB)
+ {
+ Name(_HID, EisaId("PNP0C0C"))
+ }
+}
+
+Scope (\_SB.PCI0.I2C0)
+{
+ Device (CTPA)
+ {
+ Name (_HID, "CYAP0000")
+ Name (_DDN, "Cypress Touchpad")
+ Name (_UID, 3)
+ Name (ISTP, 1) /* Touchpad */
+
+ Name (_CRS, ResourceTemplate()
+ {
+ I2cSerialBus (
+ 0x67, // SlaveAddress
+ ControllerInitiated, // SlaveMode
+ 400000, // ConnectionSpeed
+ AddressingMode7Bit, // AddressingMode
+ "\\_SB.PCI0.I2C0" // ResourceSource
+ )
+ Interrupt (ResourceConsumer, Edge, ActiveLow)
+ {
+ BOARD_TRACKPAD_IRQ
+ }
+ })
+
+ Method (_STA)
+ {
+ If (LEqual (\S1EN, 1)) {
+ Return (0xF)
+ } Else {
+ Return (0x0)
+ }
+ }
+
+ Name (_PRW, Package() { BOARD_TRACKPAD_WAKE_GPIO, 0x3 })
+
+ Method (_DSW, 3, NotSerialized)
+ {
+ Store (BOARD_TRACKPAD_WAKE_GPIO, Local0)
+ If (LEqual (Arg0, 1)) {
+ // Enable GPIO as wake source
+ \_SB.PCI0.LPCB.GWAK (Local0)
+ }
+ }
+
+ /* Allow device to power off in S0 */
+ Name (_S0W, 4)
+ }
+}
\ No newline at end of file
diff --git a/src/mainboard/google/slippy/variants/wolf/include/variant/gpio.h b/src/mainboard/google/slippy/variants/wolf/include/variant/gpio.h
new file mode 100644
index 0000000..fe2b314
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/wolf/include/variant/gpio.h
@@ -0,0 +1,120 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef WOLF_GPIO_H
+#define WOLF_GPIO_H
+
+struct pch_lp_gpio_map;
+
+const struct pch_lp_gpio_map mainboard_gpio_map[] = {
+ LP_GPIO_UNUSED, /* 0: UNUSED */
+ LP_GPIO_UNUSED, /* 1: UNUSED */
+ LP_GPIO_UNUSED, /* 2: UNUSED */
+ LP_GPIO_UNUSED, /* 3: UNUSED */
+ LP_GPIO_NATIVE, /* 4: NATIVE: I2C0_SDA_GPIO4 */
+ LP_GPIO_NATIVE, /* 5: NATIVE: I2C0_SCL_GPIO5 */
+ LP_GPIO_NATIVE, /* 6: NATIVE: I2C1_SDA_GPIO6 */
+ LP_GPIO_NATIVE, /* 7: NATIVE: I2C1_SCL_GPIO7 */
+ LP_GPIO_ACPI_SCI, /* 8: LTE_WAKE_L_Q */
+ LP_GPIO_INPUT, /* 9: RAM_ID1 */
+ LP_GPIO_ACPI_SCI, /* 10: WLAN_WAKE_L_Q */
+ LP_GPIO_UNUSED, /* 11: UNUSED */
+ LP_GPIO_INPUT_INVERT, /* 12: TRACKPAD_INT_L (WAKE) */
+ LP_GPIO_INPUT, /* 13: RAM_ID0 */
+ LP_GPIO_INPUT, /* 14: EC_IN_RW */
+ LP_GPIO_UNUSED, /* 15: UNUSED (STRAP) */
+ LP_GPIO_UNUSED, /* 16: UNUSED */
+ LP_GPIO_UNUSED, /* 17: UNUSED */
+ LP_GPIO_NATIVE, /* 18: PCIE_CLKREQ_WLAN# */
+ LP_GPIO_UNUSED, /* 19: UNUSED */
+ LP_GPIO_UNUSED, /* 20: UNUSED */
+ LP_GPIO_UNUSED, /* 21: UNUSED */
+ LP_GPIO_UNUSED, /* 22: UNUSED */
+ LP_GPIO_UNUSED, /* 23: UNUSED */
+ LP_GPIO_UNUSED, /* 24: UNUSED */
+ LP_GPIO_INPUT_INVERT, /* 25: TOUCH_INT_L (WAKE) */
+ LP_GPIO_UNUSED, /* 26: UNUSED */
+ LP_GPIO_UNUSED, /* 27: UNUSED */
+ LP_GPIO_UNUSED, /* 28: UNUSED */
+ LP_GPIO_UNUSED, /* 29: UNUSED */
+ LP_GPIO_NATIVE, /* 30: NATIVE: PCH_SUSWARN_L */
+ LP_GPIO_NATIVE, /* 31: NATIVE: ACPRESENT */
+ LP_GPIO_NATIVE, /* 32: NATIVE: LPC_CLKRUN_L */
+ LP_GPIO_NATIVE, /* 33: NATIVE: DEVSLP0 */
+ LP_GPIO_ACPI_SMI, /* 34: EC_SMI_L */
+ LP_GPIO_ACPI_SMI, /* 35: PCH_NMI_DBG_L (route in NMI_EN) */
+ LP_GPIO_ACPI_SCI, /* 36: EC_SCI_L */
+ LP_GPIO_UNUSED, /* 37: UNUSED */
+ LP_GPIO_UNUSED, /* 38: UNUSED */
+ LP_GPIO_UNUSED, /* 39: UNUSED */
+ LP_GPIO_NATIVE, /* 40: NATIVE: USB_OC0# */
+ LP_GPIO_UNUSED, /* 41: UNUSED */
+ LP_GPIO_NATIVE, /* 42: NATIVE: USB_OC2# */
+ LP_GPIO_UNUSED, /* 43: UNUSED */
+ LP_GPIO_OUT_HIGH, /* 44: PP3300_SSD_EN */
+ LP_GPIO_OUT_HIGH, /* 45: PP3300_CODEC_EN */
+ LP_GPIO_OUT_HIGH, /* 46: WLAN_DISABLE_L */
+ LP_GPIO_INPUT, /* 47: RAM_ID2 */
+ LP_GPIO_UNUSED, /* 48: UNUSED */
+ LP_GPIO_UNUSED, /* 49: UNUSED */
+ LP_GPIO_UNUSED, /* 50: UNUSED */
+ LP_GPIO_UNUSED, /* 51: UNUSED */
+ LP_GPIO_INPUT, /* 52: SIM_DET */
+ LP_GPIO_PIRQ, /* 53: TRACKPAD_INT_DX */
+ LP_GPIO_PIRQ, /* 54: TOUCH_INT_L_DX */
+ LP_GPIO_UNUSED, /* 55: UNUSED */
+ LP_GPIO_UNUSED, /* 56: UNUSED */
+ LP_GPIO_OUT_HIGH, /* 57: PP3300_CCD_EN */
+ LP_GPIO_INPUT, /* 58: PCH_SPI_WP_D */
+ LP_GPIO_OUT_HIGH, /* 59: LTE_DISABLE_L */
+ LP_GPIO_NATIVE, /* 60: NATIVE: SML0ALERT */
+ LP_GPIO_UNUSED, /* 61: UNUSED */
+ LP_GPIO_UNUSED, /* 62: UNUSED */
+ LP_GPIO_NATIVE, /* 63: NATIVE: PCH_SLP_S5_L */
+ LP_GPIO_UNUSED, /* 64: UNUSED */
+ LP_GPIO_UNUSED, /* 65: UNUSED */
+ LP_GPIO_UNUSED, /* 66: UNUSED (STRAP) */
+ LP_GPIO_UNUSED, /* 67: UNUSED */
+ LP_GPIO_UNUSED, /* 68: UNUSED */
+ LP_GPIO_UNUSED, /* 69: UNUSED */
+ LP_GPIO_UNUSED, /* 70: UNUSED */
+ LP_GPIO_NATIVE, /* 71: NATIVE: MODPHY_EN */
+ LP_GPIO_NATIVE, /* 72: NATIVE: PCH_BATLOW# */
+ LP_GPIO_NATIVE, /* 73: NATIVE: SMB1ALERT# */
+ LP_GPIO_NATIVE, /* 74: NATIVE: SMB_ME1_DAT */
+ LP_GPIO_NATIVE, /* 75: NATIVE: SMB_ME1_CLK */
+ LP_GPIO_UNUSED, /* 76: UNUSED */
+ LP_GPIO_UNUSED, /* 77: UNUSED */
+ LP_GPIO_UNUSED, /* 78: UNUSED */
+ LP_GPIO_UNUSED, /* 79: UNUSED */
+ LP_GPIO_UNUSED, /* 80: UNUSED */
+ LP_GPIO_NATIVE, /* 81: NATIVE: SPKR */
+ LP_GPIO_NATIVE, /* 82: NATIVE: EC_RCIN_L */
+ LP_GPIO_UNUSED, /* 83: UNUSED */
+ LP_GPIO_UNUSED, /* 84: UNUSED */
+ LP_GPIO_UNUSED, /* 85: UNUSED */
+ LP_GPIO_UNUSED, /* 86: UNUSED (STRAP) */
+ LP_GPIO_UNUSED, /* 87: UNUSED */
+ LP_GPIO_UNUSED, /* 88: UNUSED */
+ LP_GPIO_UNUSED, /* 89: UNUSED */
+ LP_GPIO_UNUSED, /* 90: UNUSED */
+ LP_GPIO_UNUSED, /* 91: UNUSED */
+ LP_GPIO_UNUSED, /* 92: UNUSED */
+ LP_GPIO_UNUSED, /* 93: UNUSED */
+ LP_GPIO_UNUSED, /* 94: UNUSED */
+ LP_GPIO_END
+};
+
+#endif
\ No newline at end of file
diff --git a/src/mainboard/google/slippy/variants/wolf/romstage.c b/src/mainboard/google/slippy/variants/wolf/romstage.c
new file mode 100644
index 0000000..4bdde31
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/wolf/romstage.c
@@ -0,0 +1,175 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2012 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <delay.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <cbfs.h>
+#include <console/console.h>
+#include <cpu/intel/haswell/haswell.h>
+#include "ec/google/chromeec/ec.h"
+#include <northbridge/intel/haswell/haswell.h>
+#include <northbridge/intel/haswell/raminit.h>
+#include <southbridge/intel/lynxpoint/pch.h>
+#include <southbridge/intel/lynxpoint/lp_gpio.h>
+#include <variant/gpio.h>
+#include "../../variant.h"
+
+const struct rcba_config_instruction rcba_config[] = {
+
+ /*
+ * GFX INTA -> PIRQA (MSI)
+ * D28IP_P1IP PCIE INTA -> PIRQA
+ * D29IP_E1P EHCI INTA -> PIRQD
+ * D20IP_XHCI XHCI INTA -> PIRQC (MSI)
+ * D31IP_SIP SATA INTA -> PIRQF (MSI)
+ * D31IP_SMIP SMBUS INTB -> PIRQG
+ * D31IP_TTIP THRT INTC -> PIRQA
+ * D27IP_ZIP HDA INTA -> PIRQG (MSI)
+ */
+
+ /* Device interrupt pin register (board specific) */
+ RCBA_SET_REG_32(D31IP, (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
+ (INTB << D31IP_SMIP) | (INTA << D31IP_SIP)),
+ RCBA_SET_REG_32(D29IP, (INTA << D29IP_E1P)),
+ RCBA_SET_REG_32(D28IP, (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) |
+ (INTB << D28IP_P4IP)),
+ RCBA_SET_REG_32(D27IP, (INTA << D27IP_ZIP)),
+ RCBA_SET_REG_32(D26IP, (INTA << D26IP_E2P)),
+ RCBA_SET_REG_32(D22IP, (NOINT << D22IP_MEI1IP)),
+ RCBA_SET_REG_32(D20IP, (INTA << D20IP_XHCI)),
+
+ /* Device interrupt route registers */
+ RCBA_SET_REG_32(D31IR, DIR_ROUTE(PIRQG, PIRQC, PIRQB, PIRQA)),/* LPC */
+ RCBA_SET_REG_32(D29IR, DIR_ROUTE(PIRQD, PIRQD, PIRQD, PIRQD)),/* EHCI */
+ RCBA_SET_REG_32(D28IR, DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD)),/* PCIE */
+ RCBA_SET_REG_32(D27IR, DIR_ROUTE(PIRQG, PIRQG, PIRQG, PIRQG)),/* HDA */
+ RCBA_SET_REG_32(D22IR, DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA)),/* ME */
+ RCBA_SET_REG_32(D21IR, DIR_ROUTE(PIRQE, PIRQF, PIRQF, PIRQF)),/* SIO */
+ RCBA_SET_REG_32(D20IR, DIR_ROUTE(PIRQC, PIRQC, PIRQC, PIRQC)),/* XHCI */
+ RCBA_SET_REG_32(D23IR, DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH)),/* SDIO */
+
+ /* Disable unused devices (board specific) */
+ RCBA_RMW_REG_32(FD, ~0, PCH_DISABLE_ALWAYS),
+
+ RCBA_END_CONFIG,
+};
+
+/* Copy SPD data for on-board memory */
+static void copy_spd(struct pei_data *peid)
+{
+ const int gpio_vector[] = {13, 9, 47, -1};
+ int spd_index = get_gpios(gpio_vector);
+ char *spd_file;
+ size_t spd_file_len;
+
+ printk(BIOS_DEBUG, "SPD index %d\n", spd_index);
+ spd_file = cbfs_boot_map_with_leak("spd.bin", CBFS_TYPE_SPD,
+ &spd_file_len);
+ if (!spd_file)
+ die("SPD data not found.");
+
+ if (spd_file_len <
+ ((spd_index + 1) * sizeof(peid->spd_data[0]))) {
+ printk(BIOS_ERR, "SPD index override to 0 - old hardware?\n");
+ spd_index = 0;
+ }
+
+ if (spd_file_len < sizeof(peid->spd_data[0]))
+ die("Missing SPD data.");
+
+ /* Index 0-2, are 4GB config with both CH0 and CH1
+ * Index 3-5, are 2GB config with CH0 only
+ */
+ switch (spd_index) {
+ case 3: case 4: case 5:
+ peid->dimm_channel1_disabled = 3;
+ }
+
+ memcpy(peid->spd_data[0],
+ spd_file +
+ spd_index * sizeof(peid->spd_data[0]),
+ sizeof(peid->spd_data[0]));
+}
+
+void variant_romstage_entry(unsigned long bist)
+{
+ struct pei_data pei_data = {
+ .pei_version = PEI_VERSION,
+ .mchbar = (uintptr_t)DEFAULT_MCHBAR,
+ .dmibar = (uintptr_t)DEFAULT_DMIBAR,
+ .epbar = DEFAULT_EPBAR,
+ .pciexbar = DEFAULT_PCIEXBAR,
+ .smbusbar = SMBUS_IO_BASE,
+ .wdbbar = 0x4000000,
+ .wdbsize = 0x1000,
+ .hpet_address = HPET_ADDR,
+ .rcba = (uintptr_t)DEFAULT_RCBA,
+ .pmbase = DEFAULT_PMBASE,
+ .gpiobase = DEFAULT_GPIOBASE,
+ .temp_mmio_base = 0xfed08000,
+ .system_type = 5, /* ULT */
+ .tseg_size = CONFIG_SMM_TSEG_SIZE,
+ .spd_addresses = { 0xff, 0x00, 0xff, 0x00 },
+ .ec_present = 1,
+ // 0 = leave channel enabled
+ // 1 = disable dimm 0 on channel
+ // 2 = disable dimm 1 on channel
+ // 3 = disable dimm 0+1 on channel
+ .dimm_channel0_disabled = 2,
+ .dimm_channel1_disabled = 2,
+ .max_ddr3_freq = 1600,
+ .usb_xhci_on_resume = 1,
+ .usb2_ports = {
+ /* Length, Enable, OCn#, Location */
+ { 0x0040, 1, 0, /* P0: Port A, CN10 */
+ USB_PORT_BACK_PANEL },
+ { 0x0040, 1, 2, /* P1: Port B, CN11 */
+ USB_PORT_BACK_PANEL },
+ { 0x0080, 1, USB_OC_PIN_SKIP, /* P2: CCD */
+ USB_PORT_INTERNAL },
+ { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */
+ USB_PORT_MINI_PCIE },
+ { 0x0040, 1, USB_OC_PIN_SKIP, /* P4: LTE */
+ USB_PORT_INTERNAL },
+ { 0x0000, 1, USB_OC_PIN_SKIP, /* P5: EMPTY */
+ USB_PORT_SKIP },
+ { 0x0040, 1, USB_OC_PIN_SKIP, /* P6: SD Card */
+ USB_PORT_INTERNAL },
+ { 0x0000, 0, USB_OC_PIN_SKIP, /* P7: EMPTY */
+ USB_PORT_SKIP },
+ },
+ .usb3_ports = {
+ /* Enable, OCn# */
+ { 1, 0 }, /* P1; Port A, CN10 */
+ { 1, 2 }, /* P2; Port B, CN11 */
+ { 0, USB_OC_PIN_SKIP }, /* P3; */
+ { 0, USB_OC_PIN_SKIP }, /* P4; */
+ },
+ };
+
+ struct romstage_params romstage_params = {
+ .pei_data = &pei_data,
+ .gpio_map = &mainboard_gpio_map,
+ .rcba_config = &rcba_config[0],
+ .bist = bist,
+ .copy_spd = copy_spd,
+ };
+
+ /* Call into the real romstage main with this board's attributes. */
+ romstage_common(&romstage_params);
+}
diff --git a/src/mainboard/google/slippy/variants/wolf/spd/Hynix_HMT425S6AFR6A.spd.hex b/src/mainboard/google/slippy/variants/wolf/spd/Hynix_HMT425S6AFR6A.spd.hex
new file mode 100644
index 0000000..7b09327
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/wolf/spd/Hynix_HMT425S6AFR6A.spd.hex
@@ -0,0 +1,17 @@
+# Hynix HMT425S6AFR6A-PBA
+92 12 0B 03 04 19 02 02 03 52 01 08 0A 00 FE 00
+69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 01
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 0F 11 62 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 80 AD 01 00 00 00 00 00 00 FF AB
+48 4D 54 34 32 35 53 36 41 46 52 36 41 2D 50 42
+20 20 4E 30 80 AD 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
diff --git a/src/mainboard/google/slippy/variants/wolf/spd/Micron_4KTF25664HZ.spd.hex b/src/mainboard/google/slippy/variants/wolf/spd/Micron_4KTF25664HZ.spd.hex
new file mode 100644
index 0000000..cbe9e4f
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/wolf/spd/Micron_4KTF25664HZ.spd.hex
@@ -0,0 +1,17 @@
+# Micron 4KTF25664HZ-1G6E1
+92 11 0B 03 04 19 02 02 03 11 01 08 0A 00 FE 00
+69 78 69 3C 69 11 18 81 20 08 3C 3C 01 40 83 05
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 0F 01 02 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 80 2C 00 00 00 00 00 00 00 AD 75
+34 4B 54 46 32 35 36 36 34 48 5A 2D 31 47 36 45
+31 20 45 31 80 2C 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
diff --git a/src/mainboard/google/slippy/variants/wolf/spd/Samsung_K4B4G1646B.spd.hex b/src/mainboard/google/slippy/variants/wolf/spd/Samsung_K4B4G1646B.spd.hex
new file mode 100644
index 0000000..fb529d0
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/wolf/spd/Samsung_K4B4G1646B.spd.hex
@@ -0,0 +1,17 @@
+# Samsung K4B4G1646B-HYXX
+92 11 0B 03 04 19 02 02 03 11 01 08 0C 00 3E 00
+69 78 69 3C 69 11 20 89 20 08 3C 3C 01 68 83 01
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 0F 11 02 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 80 CE 01 00 00 00 00 00 00 2A E3
+4D 34 37 31 42 35 36 37 34 42 48 30 2D 43 48 39
+20 20 00 00 80 CE 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
+FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
\ No newline at end of file
More information about the coreboot-gerrit
mailing list