[coreboot-gerrit] New patch to review for coreboot: sb/intel/i3100/lpc.c: Use tab for indents

[HAOUAS Elyes (ehaouas@noos.fr)]

HAOUAS Elyes (ehaouas at noos.fr) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/17584

-gerrit

commit d3ed69a4f65999b64e2e063a02760e60f5ac18d7
Author: Elyes HAOUAS <ehaouas at noos.fr>
Date:   Wed Nov 23 19:09:38 2016 +0100

    sb/intel/i3100/lpc.c: Use tab for indents
    
    Change-Id: I37d0b1ad84a95342015659d319ac4ce20e5717be
    Signed-off-by: Elyes HAOUAS <ehaouas at noos.fr>
---
 src/southbridge/intel/i3100/lpc.c | 120 +++++++++++++++++++-------------------
 1 file changed, 60 insertions(+), 60 deletions(-)

diff --git a/src/southbridge/intel/i3100/lpc.c b/src/southbridge/intel/i3100/lpc.c
index 7b319cf..e3c463b 100644
--- a/src/southbridge/intel/i3100/lpc.c
+++ b/src/southbridge/intel/i3100/lpc.c
@@ -242,66 +242,66 @@ static void i3100_pirq_init(device_t dev)
 }
 
 static void i3100_power_options(device_t dev) {
-  u8 reg8;
-  u16 reg16;
-  int pwr_on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
-  int nmi_option;
-
-  /* Which state do we want to goto after g3 (power restored)?
-   * 0 == S0 Full On
-   * 1 == S5 Soft Off
-   */
-  get_option(&pwr_on, "power_on_after_fail");
-  reg8 = pci_read_config8(dev, GEN_PMCON_3);
-  reg8 &= 0xfe;
-  if (pwr_on) {
-    reg8 &= ~1;
-  } else {
-    reg8 |= 1;
-  }
-  /* avoid #S4 assertions */
-  reg8 |= (3 << 4);
-  /* minimum asssertion is 1 to 2 RTCCLK */
-  reg8 &= ~(1 << 3);
-  pci_write_config8(dev, GEN_PMCON_3, reg8);
-  printk(BIOS_INFO, "set power %s after power fail\n", pwr_on ? "on" : "off");
-
-  /* Set up NMI on errors. */
-  reg8 = inb(0x61);
-  /* Higher Nibble must be 0 */
-  reg8 &= 0x0f;
-  /* IOCHK# NMI Enable */
-  reg8 &= ~(1 << 3);
-  /* PCI SERR# Enable */
-  // reg8 &= ~(1 << 2);
-  /* PCI SERR# Disable for now */
-  reg8 |= (1 << 2);
-  outb(reg8, 0x61);
-
-  reg8 = inb(0x70);
-  nmi_option = NMI_OFF;
-  get_option(&nmi_option, "nmi");
-  if (nmi_option) {
-    /* Set NMI. */
-    printk(BIOS_INFO, "NMI sources enabled.\n");
-    reg8 &= ~(1 << 7);
-  } else {
-    /* Can't mask NMI from PCI-E and NMI_NOW */
-    printk(BIOS_INFO, "NMI sources disabled.\n");
-    reg8 |= ( 1 << 7);
-  }
-  outb(reg8, 0x70);
-
-  // Enable CPU_SLP# and Intel Speedstep, set SMI# rate down
-  reg16 = pci_read_config16(dev, GEN_PMCON_1);
-  reg16 &= ~((3 << 0) | (1 << 10));
-  reg16 |= (1 << 3) | (1 << 5);
-  /* CLKRUN_EN */
-  // reg16 |= (1 << 2);
-  pci_write_config16(dev, GEN_PMCON_1, reg16);
-
-  // Set the board's GPI routing.
-  // i82801gx_gpi_routing(dev);
+	u8 reg8;
+	u16 reg16;
+	int pwr_on = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
+	int nmi_option;
+
+	/* Which state do we want to goto after g3 (power restored)?
+	 * 0 == S0 Full On
+	 * 1 == S5 Soft Off
+	 */
+	get_option(&pwr_on, "power_on_after_fail");
+	reg8 = pci_read_config8(dev, GEN_PMCON_3);
+	reg8 &= 0xfe;
+	if (pwr_on) {
+		reg8 &= ~1;
+	} else {
+		reg8 |= 1;
+	}
+	/* avoid #S4 assertions */
+	reg8 |= (3 << 4);
+	/* minimum asssertion is 1 to 2 RTCCLK */
+	reg8 &= ~(1 << 3);
+	pci_write_config8(dev, GEN_PMCON_3, reg8);
+	printk(BIOS_INFO, "set power %s after power fail\n", pwr_on ? "on" : "off");
+
+	/* Set up NMI on errors. */
+	reg8 = inb(0x61);
+	/* Higher Nibble must be 0 */
+	reg8 &= 0x0f;
+	/* IOCHK# NMI Enable */
+	reg8 &= ~(1 << 3);
+	/* PCI SERR# Enable */
+	// reg8 &= ~(1 << 2);
+	/* PCI SERR# Disable for now */
+	reg8 |= (1 << 2);
+	outb(reg8, 0x61);
+
+	reg8 = inb(0x70);
+	nmi_option = NMI_OFF;
+	get_option(&nmi_option, "nmi");
+	if (nmi_option) {
+		/* Set NMI. */
+		printk(BIOS_INFO, "NMI sources enabled.\n");
+		reg8 &= ~(1 << 7);
+	} else {
+		/* Can't mask NMI from PCI-E and NMI_NOW */
+		printk(BIOS_INFO, "NMI sources disabled.\n");
+		reg8 |= ( 1 << 7);
+	}
+	outb(reg8, 0x70);
+
+	// Enable CPU_SLP# and Intel Speedstep, set SMI# rate down
+	reg16 = pci_read_config16(dev, GEN_PMCON_1);
+	reg16 &= ~((3 << 0) | (1 << 10));
+	reg16 |= (1 << 3) | (1 << 5);
+	/* CLKRUN_EN */
+	// reg16 |= (1 << 2);
+	pci_write_config16(dev, GEN_PMCON_1, reg16);
+
+	// Set the board's GPI routing.
+	// i82801gx_gpi_routing(dev);
 }
 
 static void i3100_gpio_init(device_t dev)