[coreboot-gerrit] Patch set updated for coreboot: intel/apollolake: Enable turbo
Shaunak Saha (shaunak.saha@intel.com)
gerrit at coreboot.org
Thu Nov 3 17:41:32 CET 2016
Shaunak Saha (shaunak.saha at intel.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/17203
-gerrit
commit 0b5aefd533827c2c75a4a33caacc0f592863fc6e
Author: Shaunak Saha <shaunak.saha at intel.com>
Date: Mon Oct 10 12:34:28 2016 -0700
intel/apollolake: Enable turbo
This patch adds punit initialization code after
FspMemoryInit so that turbo can be initialized after
that.
BUG=chrome-os-partner:58158
BRANCH=None
Change-Id: I4939da47da82b9a728cf1b5cf6d5ec54b4f5b31d
Signed-off-by: Shaunak Saha <shaunak.saha at intel.com>
---
src/soc/intel/apollolake/chip.h | 1 +
src/soc/intel/apollolake/include/soc/cpu.h | 2 ++
src/soc/intel/apollolake/include/soc/iomap.h | 6 ++++
src/soc/intel/apollolake/romstage.c | 53 ++++++++++++++++++++++++++++
src/soc/intel/apollolake/tsc_freq.c | 41 +++++++++++++++++++++
5 files changed, 103 insertions(+)
diff --git a/src/soc/intel/apollolake/chip.h b/src/soc/intel/apollolake/chip.h
index 6c3bcd8..b5d132d 100644
--- a/src/soc/intel/apollolake/chip.h
+++ b/src/soc/intel/apollolake/chip.h
@@ -124,4 +124,5 @@ struct soc_intel_apollolake_config {
uint16_t prt0_gpio;
};
+void set_max_freq(void);
#endif /* _SOC_APOLLOLAKE_CHIP_H_ */
diff --git a/src/soc/intel/apollolake/include/soc/cpu.h b/src/soc/intel/apollolake/include/soc/cpu.h
index e94972d..603d139 100644
--- a/src/soc/intel/apollolake/include/soc/cpu.h
+++ b/src/soc/intel/apollolake/include/soc/cpu.h
@@ -88,4 +88,6 @@ void apollolake_init_cpus(struct device *dev);
/* Common Timer Copy (CTC) frequency - 19.2MHz. */
#define CTC_FREQ 19200000
+#define APL_BURST_MODE_DISABLE 0x0000004000000000
+
#endif /* _SOC_APOLLOLAKE_CPU_H_ */
diff --git a/src/soc/intel/apollolake/include/soc/iomap.h b/src/soc/intel/apollolake/include/soc/iomap.h
index d5d8f87..3c94d1b 100644
--- a/src/soc/intel/apollolake/include/soc/iomap.h
+++ b/src/soc/intel/apollolake/include/soc/iomap.h
@@ -25,6 +25,12 @@
#define MCH_BASE_ADDR 0xfed10000
#define MCH_BASE_SIZE (32 * KiB)
+#define P_CR_CORE_DISABLE_MASK_0_0_0_MCHBAR 0x7168
+#define P_CR_BIOS_RESET_CPL_0_0_0_MCHBAR 0x7078
+#define PUNIT_THERMAL_DEVICE_IRQ 0x700C
+#define PUINT_THERMAL_DEVICE_IRQ_VEC_NUMBER 0x18
+#define PUINT_THERMAL_DEVICE_IRQ_LOCK 0x80000000
+
#define ACPI_PMIO_BASE 0x400
#define ACPI_PMIO_SIZE 0x100
#define R_ACPI_PM1_TMR 0x8
diff --git a/src/soc/intel/apollolake/romstage.c b/src/soc/intel/apollolake/romstage.c
index 1f6a38f..ffa20f7 100644
--- a/src/soc/intel/apollolake/romstage.c
+++ b/src/soc/intel/apollolake/romstage.c
@@ -40,6 +40,8 @@
#include <soc/uart.h>
#include <string.h>
#include <timestamp.h>
+#include <delay.h>
+#include "chip.h"
static struct chipset_power_state power_state CAR_GLOBAL;
@@ -100,6 +102,53 @@ static void migrate_power_state(int is_recovery)
}
ROMSTAGE_CBMEM_INIT_HOOK(migrate_power_state);
+/*
+ * Punit Initialization code.This all isn't documented, but
+ * this is the recipe .
+ */
+static void punit_init(void)
+{
+ uint32_t reg;
+ uint32_t data;
+
+ /* Software Core Disable Mask (P_CR_CORE_DISABLE_MASK_0_0_0_MCHBAR) */
+ write32((void *)(MCH_BASE_ADDR + P_CR_CORE_DISABLE_MASK_0_0_0_MCHBAR),
+ 0x0);
+
+ /* P-Unit bring up */
+ reg = read32((void *)(MCH_BASE_ADDR +
+ P_CR_BIOS_RESET_CPL_0_0_0_MCHBAR));
+ if (reg == 0xffffffff) {
+ /* P-unit not found */
+ printk(BIOS_DEBUG,"Punit MMIO not available \n");
+ } else {
+ /* Set Punit interrupt pin IPIN offset 3D */
+ write32((void *)(0xE000103D),0x002);
+
+ /* Set PUINT IRQ to 24 and INTPIN LOCK */
+ write32((void *)(MCH_BASE_ADDR + PUNIT_THERMAL_DEVICE_IRQ),
+ PUINT_THERMAL_DEVICE_IRQ_VEC_NUMBER |
+ PUINT_THERMAL_DEVICE_IRQ_LOCK);
+
+ data = read32((void *)(MCH_BASE_ADDR + 0x7818));
+ data &= 0xFFFFE01F;
+ data |= (0x20 | 0x200);
+ write32((void *)(MCH_BASE_ADDR + 0x7818), data);
+
+ /* Stage0 BIOS Reset Complete (RST_CPL) */
+ write32((void *)(MCH_BASE_ADDR +
+ P_CR_BIOS_RESET_CPL_0_0_0_MCHBAR), 0x1);
+
+ /* Poll for bit 8 in same reg (RST_CPL) */
+ data = read32((void *)(MCH_BASE_ADDR +
+ P_CR_BIOS_RESET_CPL_0_0_0_MCHBAR));
+ while ( !(read32 ((void *)(MCH_BASE_ADDR +
+ P_CR_BIOS_RESET_CPL_0_0_0_MCHBAR)) & 0x100) ) {
+ udelay(100);
+ }
+ }
+}
+
asmlinkage void car_stage_entry(void)
{
struct postcar_frame pcf;
@@ -119,6 +168,10 @@ asmlinkage void car_stage_entry(void)
s3wake = fill_power_state(ps) == ACPI_S3;
fsp_memory_init(s3wake);
+
+ punit_init();
+ set_max_freq();
+
if (postcar_frame_init(&pcf, 1*KiB))
die("Unable to initialize postcar frame.\n");
diff --git a/src/soc/intel/apollolake/tsc_freq.c b/src/soc/intel/apollolake/tsc_freq.c
index 9dd1dea..6510c00 100644
--- a/src/soc/intel/apollolake/tsc_freq.c
+++ b/src/soc/intel/apollolake/tsc_freq.c
@@ -14,12 +14,53 @@
* GNU General Public License for more details.
*/
+#include <cpu/intel/turbo.h>
#include <cpu/x86/msr.h>
#include <cpu/x86/tsc.h>
#include <soc/cpu.h>
+#include <console/console.h>
+#include <delay.h>
+#include "chip.h"
unsigned long tsc_freq_mhz(void)
{
msr_t msr = rdmsr(MSR_PLATFORM_INFO);
return (BASE_CLOCK_MHZ * ((msr.lo >> 8) & 0xff));
}
+
+void set_max_freq(void)
+{
+ msr_t msr, msr_rd;
+ unsigned int eax;
+
+ eax = cpuid_eax(6);
+
+ msr = rdmsr(MSR_IA32_MISC_ENABLES);
+ if ((eax == 0) && ((msr.hi & APL_BURST_MODE_DISABLE) == 0)) {
+ /* Burst Mode has been factory configured as disabled
+ * and is not available in this physical processor
+ * package.
+ */
+ printk(BIOS_DEBUG, "Burst Mode is factory disabled\n");
+ return;
+ }
+
+ /* Enable burst mode */
+ msr.hi = 0;
+ wrmsr(MSR_IA32_MISC_ENABLES, msr);
+
+ /* Enable speed step. */
+ msr = rdmsr(MSR_IA32_MISC_ENABLES);
+ msr.lo |= (1 << 16);
+ wrmsr(MSR_IA32_MISC_ENABLES, msr);
+
+ /* Set P-State ratio */
+ msr = rdmsr(IA32_PERL_CTL);
+ msr.lo &= ~(0xff00);
+
+ /* Read the frequency limit ratio and set it properly in PERF_CTL */
+ msr_rd = rdmsr(FREQ_LIMIT_RATIO);
+ msr.lo |= ((msr_rd.lo & 0xff) << 8);
+
+ wrmsr(IA32_PERL_CTL, msr);
+}
More information about the coreboot-gerrit
mailing list