[coreboot-gerrit] Patch merged into coreboot/master: siemens/mc_tcu3: Don't try to init unsupported panel type

[gerrit at coreboot.org]

the following patch was just integrated into master:
commit 70ca32e0ba565c567a5046c1e26d7c42d723a553
Author: Werner Zeh <werner.zeh at siemens.com>
Date:   Mon May 9 08:14:45 2016 +0200

    siemens/mc_tcu3: Don't try to init unsupported panel type
    
    The LCD panel type is read using 4 GPIOs. Of these 16 possible
    combinations only 5 are supported right now. If the GPIO setting encodes
    an unsupported panel type, there will be no matching hwinfo.hex in cbfs.
    Therefore it makes no sense to try to initialize the DisplayPort-2-LVDS
    converter. Leave the function instead in this case.
    
    Change-Id: If8c67a3f5be762758d516c4939dd1de4ff1c8ba5
    Signed-off-by: Werner Zeh <werner.zeh at siemens.com>
    Reviewed-on: https://review.coreboot.org/14743
    Tested-by: build bot (Jenkins)
    Reviewed-by: Paul Menzel <paulepanter at users.sourceforge.net>
    Reviewed-by: Mario Scheithauer <mario.scheithauer at siemens.com>


See https://review.coreboot.org/14743 for details.

-gerrit