[coreboot-gerrit] Patch set updated for coreboot: libpayload: ipq40xx: Introduce timer and uart driver
Patrick Georgi (pgeorgi@google.com)
gerrit at coreboot.org
Sat May 7 08:43:07 CEST 2016
Patrick Georgi (pgeorgi at google.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/14656
-gerrit
commit a60ebbe09858e9abdff4c7324b80273b65620cdd
Author: Varadarajan Narayanan <varada at codeaurora.org>
Date: Mon Feb 1 11:32:12 2016 +0530
libpayload: ipq40xx: Introduce timer and uart driver
BUG=chrome-os-partner:49249
TEST=None. Initial code not sure if it will even compile
BRANCH=none
Change-Id: Ibf2c91be93e2567cc1262b6fb84461eef51ab3e0
Signed-off-by: Patrick Georgi <pgeorgi at chromium.org>
Original-Commit-Id: b87157138302b017e64a28417a22421c880c1bcb
Original-Change-Id: I16a8324d3c8ef4ee729f4509fda5bfe703b24ce4
Original-Signed-off-by: Varadarajan Narayanan <varada at codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/333304
Original-Reviewed-by: David Hendricks <dhendrix at chromium.org>
---
payloads/libpayload/Kconfig | 11 +
payloads/libpayload/drivers/Makefile.inc | 2 +
payloads/libpayload/drivers/serial/ipq40xx.c | 568 +++++++++++++++++++++++++++
payloads/libpayload/drivers/timer/ipq40xx.c | 52 +++
4 files changed, 633 insertions(+)
diff --git a/payloads/libpayload/Kconfig b/payloads/libpayload/Kconfig
index 515cf78..276eb30 100644
--- a/payloads/libpayload/Kconfig
+++ b/payloads/libpayload/Kconfig
@@ -237,6 +237,11 @@ config IPQ806X_SERIAL_CONSOLE
depends on SERIAL_CONSOLE
default n
+config IPQ40XX_SERIAL_CONSOLE
+ bool "IPQ40xx SOC compatible serial port driver"
+ depends on SERIAL_CONSOLE
+ default n
+
config BG4CD_SERIAL_CONSOLE
bool "Serial port driver for Marvell's BG4CD"
depends on SERIAL_CONSOLE
@@ -427,6 +432,12 @@ config TIMER_ARMADA38X
This is the timer driver for marvell armada38x
platforms.
+config TIMER_IPQ40XX
+ bool "Timer for ipq40xx platforms"
+ help
+ This is the timer driver for QCA IPQ40xx based
+ platforms.
+
config TIMER_RK
bool "Timer for Rockchip"
diff --git a/payloads/libpayload/drivers/Makefile.inc b/payloads/libpayload/drivers/Makefile.inc
index 644b0d9..75f08f2 100644
--- a/payloads/libpayload/drivers/Makefile.inc
+++ b/payloads/libpayload/drivers/Makefile.inc
@@ -36,6 +36,7 @@ libc-$(CONFIG_LP_SPEAKER) += speaker.c
libc-$(CONFIG_LP_8250_SERIAL_CONSOLE) += serial/8250.c serial/serial.c
libc-$(CONFIG_LP_S5P_SERIAL_CONSOLE) += serial/s5p.c serial/serial.c
libc-$(CONFIG_LP_IPQ806X_SERIAL_CONSOLE) += serial/ipq806x.c serial/serial.c
+libc-$(CONFIG_LP_IPQ40XX_SERIAL_CONSOLE) += serial/ipq40xx.c serial/serial.c
libc-$(CONFIG_LP_BG4CD_SERIAL_CONSOLE) += serial/bg4cd.c serial/serial.c
libc-$(CONFIG_LP_PC_KEYBOARD) += keyboard.c
@@ -50,6 +51,7 @@ libc-$(CONFIG_LP_TIMER_MCT) += timer/mct.c
libc-$(CONFIG_LP_TIMER_RDTSC) += timer/rdtsc.c
libc-$(CONFIG_LP_TIMER_TEGRA_1US) += timer/tegra_1us.c
libc-$(CONFIG_LP_TIMER_IPQ806X) += timer/ipq806x.c
+libc-$(CONFIG_LP_TIMER_IPQ40XX) += timer/ipq40xx.c
libc-$(CONFIG_LP_TIMER_RK) += timer/rktimer.c
libc-$(CONFIG_LP_TIMER_BG4CD) += timer/bg4cd.c
libc-$(CONFIG_LP_TIMER_IMG_PISTACHIO) += timer/img_pistachio.c
diff --git a/payloads/libpayload/drivers/serial/ipq40xx.c b/payloads/libpayload/drivers/serial/ipq40xx.c
new file mode 100644
index 0000000..52d71b8
--- /dev/null
+++ b/payloads/libpayload/drivers/serial/ipq40xx.c
@@ -0,0 +1,568 @@
+/*
+ * Copyright (c) 2010-2012, 2014, 2016, The Linux Foundation.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * * Neither the name of The Linux Foundation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <libpayload.h>
+
+#define UART_DM_CLK_RX_TX_BIT_RATE 0xFF
+
+enum MSM_BOOT_UART_DM_PARITY_MODE {
+ MSM_BOOT_UART_DM_NO_PARITY,
+ MSM_BOOT_UART_DM_ODD_PARITY,
+ MSM_BOOT_UART_DM_EVEN_PARITY,
+ MSM_BOOT_UART_DM_SPACE_PARITY
+};
+
+/* UART Stop Bit Length */
+enum MSM_BOOT_UART_DM_STOP_BIT_LEN {
+ MSM_BOOT_UART_DM_SBL_9_16,
+ MSM_BOOT_UART_DM_SBL_1,
+ MSM_BOOT_UART_DM_SBL_1_9_16,
+ MSM_BOOT_UART_DM_SBL_2
+};
+
+/* UART Bits per Char */
+enum MSM_BOOT_UART_DM_BITS_PER_CHAR {
+ MSM_BOOT_UART_DM_5_BPS,
+ MSM_BOOT_UART_DM_6_BPS,
+ MSM_BOOT_UART_DM_7_BPS,
+ MSM_BOOT_UART_DM_8_BPS
+};
+
+/* 8-N-1 Configuration */
+#define MSM_BOOT_UART_DM_8_N_1_MODE (MSM_BOOT_UART_DM_NO_PARITY | \
+ (MSM_BOOT_UART_DM_SBL_1 << 2) | \
+ (MSM_BOOT_UART_DM_8_BPS << 4))
+
+/* UART_DM Registers */
+
+/* UART Operational Mode Register */
+#define MSM_BOOT_UART_DM_MR1(base) ((base) + 0x00)
+#define MSM_BOOT_UART_DM_MR2(base) ((base) + 0x04)
+#define MSM_BOOT_UART_DM_RXBRK_ZERO_CHAR_OFF (1 << 8)
+#define MSM_BOOT_UART_DM_LOOPBACK (1 << 7)
+
+#define PERIPH_BLK_BLSP 1
+
+/* UART Clock Selection Register */
+#if PERIPH_BLK_BLSP
+#define MSM_BOOT_UART_DM_CSR(base) ((base) + 0xA0)
+#else
+#define MSM_BOOT_UART_DM_CSR(base) ((base) + 0x08)
+#endif
+
+/* UART DM TX FIFO Registers - 4 */
+#if PERIPH_BLK_BLSP
+#define MSM_BOOT_UART_DM_TF(base, x) ((base) + 0x100+(4*(x)))
+#else
+#define MSM_BOOT_UART_DM_TF(base, x) ((base) + 0x70+(4*(x)))
+#endif
+
+/* UART Command Register */
+#if PERIPH_BLK_BLSP
+#define MSM_BOOT_UART_DM_CR(base) ((base) + 0xA8)
+#else
+#define MSM_BOOT_UART_DM_CR(base) ((base) + 0x10)
+#endif
+#define MSM_BOOT_UART_DM_CR_RX_ENABLE (1 << 0)
+#define MSM_BOOT_UART_DM_CR_RX_DISABLE (1 << 1)
+#define MSM_BOOT_UART_DM_CR_TX_ENABLE (1 << 2)
+#define MSM_BOOT_UART_DM_CR_TX_DISABLE (1 << 3)
+
+/* UART Channel Command */
+#define MSM_BOOT_UART_DM_CR_CH_CMD_LSB(x) ((x & 0x0f) << 4)
+#define MSM_BOOT_UART_DM_CR_CH_CMD_MSB(x) ((x >> 4) << 11)
+#define MSM_BOOT_UART_DM_CR_CH_CMD(x) \
+ (MSM_BOOT_UART_DM_CR_CH_CMD_LSB(x) | MSM_BOOT_UART_DM_CR_CH_CMD_MSB(x))
+#define MSM_BOOT_UART_DM_CMD_NULL MSM_BOOT_UART_DM_CR_CH_CMD(0)
+#define MSM_BOOT_UART_DM_CMD_RESET_RX MSM_BOOT_UART_DM_CR_CH_CMD(1)
+#define MSM_BOOT_UART_DM_CMD_RESET_TX MSM_BOOT_UART_DM_CR_CH_CMD(2)
+#define MSM_BOOT_UART_DM_CMD_RESET_ERR_STAT MSM_BOOT_UART_DM_CR_CH_CMD(3)
+#define MSM_BOOT_UART_DM_CMD_RES_BRK_CHG_INT MSM_BOOT_UART_DM_CR_CH_CMD(4)
+#define MSM_BOOT_UART_DM_CMD_START_BRK MSM_BOOT_UART_DM_CR_CH_CMD(5)
+#define MSM_BOOT_UART_DM_CMD_STOP_BRK MSM_BOOT_UART_DM_CR_CH_CMD(6)
+#define MSM_BOOT_UART_DM_CMD_RES_CTS_N MSM_BOOT_UART_DM_CR_CH_CMD(7)
+#define MSM_BOOT_UART_DM_CMD_RES_STALE_INT MSM_BOOT_UART_DM_CR_CH_CMD(8)
+#define MSM_BOOT_UART_DM_CMD_PACKET_MODE MSM_BOOT_UART_DM_CR_CH_CMD(9)
+#define MSM_BOOT_UART_DM_CMD_MODE_RESET MSM_BOOT_UART_DM_CR_CH_CMD(C)
+#define MSM_BOOT_UART_DM_CMD_SET_RFR_N MSM_BOOT_UART_DM_CR_CH_CMD(D)
+#define MSM_BOOT_UART_DM_CMD_RES_RFR_N MSM_BOOT_UART_DM_CR_CH_CMD(E)
+#define MSM_BOOT_UART_DM_CMD_RES_TX_ERR MSM_BOOT_UART_DM_CR_CH_CMD(10)
+#define MSM_BOOT_UART_DM_CMD_CLR_TX_DONE MSM_BOOT_UART_DM_CR_CH_CMD(11)
+#define MSM_BOOT_UART_DM_CMD_RES_BRKSTRT_INT MSM_BOOT_UART_DM_CR_CH_CMD(12)
+#define MSM_BOOT_UART_DM_CMD_RES_BRKEND_INT MSM_BOOT_UART_DM_CR_CH_CMD(13)
+#define MSM_BOOT_UART_DM_CMD_RES_PER_FRM_INT MSM_BOOT_UART_DM_CR_CH_CMD(14)
+
+/*UART General Command */
+#define MSM_UART_DM_CR_GENERAL_CMD(x) ((x) << 8)
+
+#define MSM_BOOT_UART_DM_GCMD_NULL MSM_UART_DM_CR_GENERAL_CMD(0)
+#define MSM_BOOT_UART_DM_GCMD_CR_PROT_EN MSM_UART_DM_CR_GENERAL_CMD(1)
+#define MSM_BOOT_UART_DM_GCMD_CR_PROT_DIS MSM_UART_DM_CR_GENERAL_CMD(2)
+#define MSM_BOOT_UART_DM_GCMD_RES_TX_RDY_INT MSM_UART_DM_CR_GENERAL_CMD(3)
+#define MSM_BOOT_UART_DM_GCMD_SW_FORCE_STALE MSM_UART_DM_CR_GENERAL_CMD(4)
+#define MSM_BOOT_UART_DM_GCMD_ENA_STALE_EVT MSM_UART_DM_CR_GENERAL_CMD(5)
+#define MSM_BOOT_UART_DM_GCMD_DIS_STALE_EVT MSM_UART_DM_CR_GENERAL_CMD(6)
+
+/* UART Interrupt Mask Register */
+#if PERIPH_BLK_BLSP
+#define MSM_BOOT_UART_DM_IMR(base) ((base) + 0xB0)
+#else
+#define MSM_BOOT_UART_DM_IMR(base) ((base) + 0x14)
+#endif
+
+#define MSM_BOOT_UART_DM_TXLEV (1 << 0)
+#define MSM_BOOT_UART_DM_RXHUNT (1 << 1)
+#define MSM_BOOT_UART_DM_RXBRK_CHNG (1 << 2)
+#define MSM_BOOT_UART_DM_RXSTALE (1 << 3)
+#define MSM_BOOT_UART_DM_RXLEV (1 << 4)
+#define MSM_BOOT_UART_DM_DELTA_CTS (1 << 5)
+#define MSM_BOOT_UART_DM_CURRENT_CTS (1 << 6)
+#define MSM_BOOT_UART_DM_TX_READY (1 << 7)
+#define MSM_BOOT_UART_DM_TX_ERROR (1 << 8)
+#define MSM_BOOT_UART_DM_TX_DONE (1 << 9)
+#define MSM_BOOT_UART_DM_RXBREAK_START (1 << 10)
+#define MSM_BOOT_UART_DM_RXBREAK_END (1 << 11)
+#define MSM_BOOT_UART_DM_PAR_FRAME_ERR_IRQ (1 << 12)
+
+#define MSM_BOOT_UART_DM_IMR_ENABLED (MSM_BOOT_UART_DM_TX_READY | \
+ MSM_BOOT_UART_DM_TXLEV | \
+ MSM_BOOT_UART_DM_RXSTALE)
+
+/* UART Interrupt Programming Register */
+#define MSM_BOOT_UART_DM_IPR(base) ((base) + 0x18)
+#define MSM_BOOT_UART_DM_STALE_TIMEOUT_LSB 0x0f
+#define MSM_BOOT_UART_DM_STALE_TIMEOUT_MSB 0 /* Not used currently */
+
+/* UART Transmit/Receive FIFO Watermark Register */
+#define MSM_BOOT_UART_DM_TFWR(base) ((base) + 0x1C)
+/* Interrupt is generated when FIFO level is less than or equal to this value */
+#define MSM_BOOT_UART_DM_TFW_VALUE 0
+
+#define MSM_BOOT_UART_DM_RFWR(base) ((base) + 0x20)
+/*Interrupt generated when no of words in RX FIFO is greater than this value */
+#define MSM_BOOT_UART_DM_RFW_VALUE 0
+
+/* UART Hunt Character Register */
+#define MSM_BOOT_UART_DM_HCR(base) ((base) + 0x24)
+
+/* Used for RX transfer initialization */
+#define MSM_BOOT_UART_DM_DMRX(base) ((base) + 0x34)
+
+/* Default DMRX value - any value bigger than FIFO size would be fine */
+#define MSM_BOOT_UART_DM_DMRX_DEF_VALUE 0x220
+
+/* Register to enable IRDA function */
+#if PERIPH_BLK_BLSP
+#define MSM_BOOT_UART_DM_IRDA(base) ((base) + 0xB8)
+#else
+#define MSM_BOOT_UART_DM_IRDA(base) ((base) + 0x38)
+#endif
+
+/* UART Data Mover Enable Register */
+#define MSM_BOOT_UART_DM_DMEN(base) ((base) + 0x3C)
+
+/* Number of characters for Transmission */
+#define MSM_BOOT_UART_DM_NO_CHARS_FOR_TX(base) ((base) + 0x040)
+
+/* UART RX FIFO Base Address */
+#define MSM_BOOT_UART_DM_BADR(base) ((base) + 0x44)
+
+/* UART Status Register */
+#if PERIPH_BLK_BLSP
+#define MSM_BOOT_UART_DM_SR(base) ((base) + 0x0A4)
+#else
+#define MSM_BOOT_UART_DM_SR(base) ((base) + 0x008)
+#endif
+#define MSM_BOOT_UART_DM_SR_RXRDY (1 << 0)
+#define MSM_BOOT_UART_DM_SR_RXFULL (1 << 1)
+#define MSM_BOOT_UART_DM_SR_TXRDY (1 << 2)
+#define MSM_BOOT_UART_DM_SR_TXEMT (1 << 3)
+#define MSM_BOOT_UART_DM_SR_UART_OVERRUN (1 << 4)
+#define MSM_BOOT_UART_DM_SR_PAR_FRAME_ERR (1 << 5)
+#define MSM_BOOT_UART_DM_RX_BREAK (1 << 6)
+#define MSM_BOOT_UART_DM_HUNT_CHAR (1 << 7)
+#define MSM_BOOT_UART_DM_RX_BRK_START_LAST (1 << 8)
+
+/* UART Receive FIFO Registers - 4 in numbers */
+#if PERIPH_BLK_BLSP
+#define MSM_BOOT_UART_DM_RF(base, x) ((base) + 0x140 + (4*(x)))
+#else
+#define MSM_BOOT_UART_DM_RF(base, x) ((base) + 0x70 + (4*(x)))
+#endif
+
+/* UART Masked Interrupt Status Register */
+#if PERIPH_BLK_BLSP
+#define MSM_BOOT_UART_DM_MISR(base) ((base) + 0xAC)
+#else
+#define MSM_BOOT_UART_DM_MISR(base) ((base) + 0x10)
+#endif
+
+/* UART Interrupt Status Register */
+#if PERIPH_BLK_BLSP
+#define MSM_BOOT_UART_DM_ISR(base) ((base) + 0xB4)
+#else
+#define MSM_BOOT_UART_DM_ISR(base) ((base) + 0x14)
+#endif
+
+/* Number of characters received since the end of last RX transfer */
+#if PERIPH_BLK_BLSP
+#define MSM_BOOT_UART_DM_RX_TOTAL_SNAP(base) ((base) + 0xBC)
+#else
+#define MSM_BOOT_UART_DM_RX_TOTAL_SNAP(base) ((base) + 0x38)
+#endif
+
+/* UART TX FIFO Status Register */
+#define MSM_BOOT_UART_DM_TXFS(base) ((base) + 0x4C)
+#define MSM_BOOT_UART_DM_TXFS_STATE_LSB(x) \
+ MSM_BOOT_UART_DM_EXTR_BITS(x, 0, 6)
+#define MSM_BOOT_UART_DM_TXFS_STATE_MSB(x) \
+ MSM_BOOT_UART_DM_EXTR_BITS(x, 14, 31)
+#define MSM_BOOT_UART_DM_TXFS_BUF_STATE(x) \
+ MSM_BOOT_UART_DM_EXTR_BITS(x, 7, 9)
+#define MSM_BOOT_UART_DM_TXFS_ASYNC_STATE(x) \
+ MSM_BOOT_UART_DM_EXTR_BITS(x, 10, 13)
+
+/* UART RX FIFO Status Register */
+#define MSM_BOOT_UART_DM_RXFS(base) ((base) + 0x50)
+#define MSM_BOOT_UART_DM_RXFS_STATE_LSB(x) \
+ MSM_BOOT_UART_DM_EXTR_BITS(x, 0, 6)
+#define MSM_BOOT_UART_DM_RXFS_STATE_MSB(x) \
+ MSM_BOOT_UART_DM_EXTR_BITS(x, 14, 31)
+#define MSM_BOOT_UART_DM_RXFS_BUF_STATE(x) \
+ MSM_BOOT_UART_DM_EXTR_BITS(x, 7, 9)
+#define MSM_BOOT_UART_DM_RXFS_ASYNC_STATE(x) \
+ MSM_BOOT_UART_DM_EXTR_BITS(x, 10, 13)
+
+/* Macros for Common Errors */
+#define MSM_BOOT_UART_DM_E_SUCCESS 0
+#define MSM_BOOT_UART_DM_E_FAILURE 1
+#define MSM_BOOT_UART_DM_E_TIMEOUT 2
+#define MSM_BOOT_UART_DM_E_INVAL 3
+#define MSM_BOOT_UART_DM_E_MALLOC_FAIL 4
+#define MSM_BOOT_UART_DM_E_RX_NOT_READY 5
+
+#define UART1_DM_BASE ((void *)0x078af000)
+#define UART2_DM_BASE ((void *)0x078b0000)
+
+enum {
+ BLSP1_UART1,
+ BLSP1_UART2,
+};
+
+#define FIFO_DATA_SIZE 4
+
+typedef struct {
+ void *uart_dm_base;
+ unsigned blsp_uart;
+} uart_params_t;
+
+/*
+ * All constants lifted from u-boot's
+ * board/qcom/ipq40xx_cdp/ipq40xx_board_param.h
+ */
+static const uart_params_t uart_board_param = {
+ .uart_dm_base = UART1_DM_BASE,
+ .blsp_uart = BLSP1_UART1,
+};
+
+#define write32(addr, val) writel(val, addr)
+#define read32(addr) readl(addr)
+/**
+ * msm_boot_uart_dm_init_rx_transfer - Init Rx transfer
+ * @uart_dm_base: UART controller base address
+ */
+static unsigned int msm_boot_uart_dm_init_rx_transfer(void *uart_dm_base)
+{
+ /* Reset receiver */
+ write32(MSM_BOOT_UART_DM_CR(uart_dm_base),
+ MSM_BOOT_UART_DM_CMD_RESET_RX);
+
+ /* Enable receiver */
+ write32(MSM_BOOT_UART_DM_CR(uart_dm_base),
+ MSM_BOOT_UART_DM_CR_RX_ENABLE);
+ write32(MSM_BOOT_UART_DM_DMRX(uart_dm_base),
+ MSM_BOOT_UART_DM_DMRX_DEF_VALUE);
+
+ /* Clear stale event */
+ write32(MSM_BOOT_UART_DM_CR(uart_dm_base),
+ MSM_BOOT_UART_DM_CMD_RES_STALE_INT);
+
+ /* Enable stale event */
+ write32(MSM_BOOT_UART_DM_CR(uart_dm_base),
+ MSM_BOOT_UART_DM_GCMD_ENA_STALE_EVT);
+
+ return MSM_BOOT_UART_DM_E_SUCCESS;
+}
+
+static unsigned int msm_boot_uart_dm_init(void *uart_dm_base);
+
+/* Received data is valid or not */
+static int valid_data = 0;
+
+/* Received data */
+static unsigned int word = 0;
+
+/**
+ * msm_boot_uart_dm_read - reads a word from the RX FIFO.
+ * @data: location where the read data is stored
+ * @count: no of valid data in the FIFO
+ * @wait: indicates blocking call or not blocking call
+ *
+ * Reads a word from the RX FIFO. If no data is available blocks if
+ * @wait is true, else returns %MSM_BOOT_UART_DM_E_RX_NOT_READY.
+ */
+static unsigned int
+msm_boot_uart_dm_read(unsigned int *data, int *count, int wait)
+{
+ static int total_rx_data = 0;
+ static int rx_data_read = 0;
+ void *base;
+ uint32_t status_reg;
+
+ base = uart_board_param.uart_dm_base;
+
+ if (data == NULL)
+ return MSM_BOOT_UART_DM_E_INVAL;
+
+ status_reg = readl(MSM_BOOT_UART_DM_MISR(base));
+
+ /* Check for DM_RXSTALE for RX transfer to finish */
+ while (!(status_reg & MSM_BOOT_UART_DM_RXSTALE)) {
+ status_reg = readl(MSM_BOOT_UART_DM_MISR(base));
+ if (!wait)
+ return MSM_BOOT_UART_DM_E_RX_NOT_READY;
+ }
+
+ /* Check for Overrun error. We'll just reset Error Status */
+ if (readl(MSM_BOOT_UART_DM_SR(base)) &
+ MSM_BOOT_UART_DM_SR_UART_OVERRUN) {
+ writel(MSM_BOOT_UART_DM_CMD_RESET_ERR_STAT,
+ MSM_BOOT_UART_DM_CR(base));
+ total_rx_data = rx_data_read = 0;
+ msm_boot_uart_dm_init(base);
+ return MSM_BOOT_UART_DM_E_RX_NOT_READY;
+ }
+
+ /* Read UART_DM_RX_TOTAL_SNAP for actual number of bytes received */
+ if (total_rx_data == 0)
+ total_rx_data = readl(MSM_BOOT_UART_DM_RX_TOTAL_SNAP(base));
+
+ /* Data available in FIFO; read a word. */
+ *data = readl(MSM_BOOT_UART_DM_RF(base, 0));
+
+ /* WAR for http://prism/CR/548280 */
+ if (*data == 0)
+ return MSM_BOOT_UART_DM_E_RX_NOT_READY;
+
+ /* increment the total count of chars we've read so far */
+ rx_data_read += FIFO_DATA_SIZE;
+
+ /* actual count of valid data in word */
+ *count = ((total_rx_data < rx_data_read) ?
+ (FIFO_DATA_SIZE - (rx_data_read - total_rx_data)) :
+ FIFO_DATA_SIZE);
+
+ /* If there are still data left in FIFO we'll read them before
+ * initializing RX Transfer again
+ */
+ if (rx_data_read < total_rx_data)
+ return MSM_BOOT_UART_DM_E_SUCCESS;
+
+ msm_boot_uart_dm_init_rx_transfer(base);
+ total_rx_data = rx_data_read = 0;
+
+ return MSM_BOOT_UART_DM_E_SUCCESS;
+}
+
+void serial_putchar(unsigned data)
+{
+ int num_of_chars = 1;
+ void *base = uart_board_param.uart_dm_base;
+
+ if (data == '\n') {
+ num_of_chars++;
+ data = (data << 8) | '\r';
+ }
+
+ /* Wait until transmit FIFO is empty. */
+ while (!(read32(MSM_BOOT_UART_DM_SR(base)) &
+ MSM_BOOT_UART_DM_SR_TXEMT))
+ udelay(1);
+ /*
+ * TX FIFO is ready to accept new character(s). First write number of
+ * characters to be transmitted.
+ */
+ write32(MSM_BOOT_UART_DM_NO_CHARS_FOR_TX(base), num_of_chars);
+
+ /* And now write the character(s) */
+ write32(MSM_BOOT_UART_DM_TF(base, 0), data);
+}
+
+/*
+ * msm_boot_uart_dm_reset - resets UART controller
+ * @base: UART controller base address
+ */
+static unsigned int msm_boot_uart_dm_reset(void *base)
+{
+ write32(MSM_BOOT_UART_DM_CR(base), MSM_BOOT_UART_DM_CMD_RESET_RX);
+ write32(MSM_BOOT_UART_DM_CR(base), MSM_BOOT_UART_DM_CMD_RESET_TX);
+ write32(MSM_BOOT_UART_DM_CR(base),
+ MSM_BOOT_UART_DM_CMD_RESET_ERR_STAT);
+ write32(MSM_BOOT_UART_DM_CR(base), MSM_BOOT_UART_DM_CMD_RES_TX_ERR);
+ write32(MSM_BOOT_UART_DM_CR(base), MSM_BOOT_UART_DM_CMD_RES_STALE_INT);
+
+ return MSM_BOOT_UART_DM_E_SUCCESS;
+}
+
+/*
+ * msm_boot_uart_dm_init - initilaizes UART controller
+ * @uart_dm_base: UART controller base address
+ */
+unsigned int msm_boot_uart_dm_init(void *uart_dm_base)
+{
+ /* Configure UART mode registers MR1 and MR2 */
+ /* Hardware flow control isn't supported */
+ write32(MSM_BOOT_UART_DM_MR1(uart_dm_base), 0x0);
+
+ /* 8-N-1 configuration: 8 data bits - No parity - 1 stop bit */
+ write32(MSM_BOOT_UART_DM_MR2(uart_dm_base),
+ MSM_BOOT_UART_DM_8_N_1_MODE);
+
+ /* Configure Interrupt Mask register IMR */
+ write32(MSM_BOOT_UART_DM_IMR(uart_dm_base),
+ MSM_BOOT_UART_DM_IMR_ENABLED);
+
+ /*
+ * Configure Tx and Rx watermarks configuration registers
+ * TX watermark value is set to 0 - interrupt is generated when
+ * FIFO level is less than or equal to 0
+ */
+ write32(MSM_BOOT_UART_DM_TFWR(uart_dm_base),
+ MSM_BOOT_UART_DM_TFW_VALUE);
+
+ /* RX watermark value */
+ write32(MSM_BOOT_UART_DM_RFWR(uart_dm_base),
+ MSM_BOOT_UART_DM_RFW_VALUE);
+
+ /* Configure Interrupt Programming Register */
+ /* Set initial Stale timeout value */
+ write32(MSM_BOOT_UART_DM_IPR(uart_dm_base),
+ MSM_BOOT_UART_DM_STALE_TIMEOUT_LSB);
+
+ /* Configure IRDA if required */
+ /* Disabling IRDA mode */
+ write32(MSM_BOOT_UART_DM_IRDA(uart_dm_base), 0x0);
+
+ /* Configure hunt character value in HCR register */
+ /* Keep it in reset state */
+ write32(MSM_BOOT_UART_DM_HCR(uart_dm_base), 0x0);
+
+ /*
+ * Configure Rx FIFO base address
+ * Both TX/RX shares same SRAM and default is half-n-half.
+ * Sticking with default value now.
+ * As such RAM size is (2^RAM_ADDR_WIDTH, 32-bit entries).
+ * We have found RAM_ADDR_WIDTH = 0x7f
+ */
+
+ /* Issue soft reset command */
+ msm_boot_uart_dm_reset(uart_dm_base);
+
+ /* Enable/Disable Rx/Tx DM interfaces */
+ /* Data Mover not currently utilized. */
+ write32(MSM_BOOT_UART_DM_DMEN(uart_dm_base), 0x0);
+
+ /* Enable transmitter */
+ write32(MSM_BOOT_UART_DM_CR(uart_dm_base),
+ MSM_BOOT_UART_DM_CR_TX_ENABLE);
+
+ /* Initialize Receive Path */
+ msm_boot_uart_dm_init_rx_transfer(uart_dm_base);
+
+ return 0;
+}
+
+/**
+ * serial_havechar - checks if data available for reading
+ *
+ * Returns 1 if data available, 0 otherwise
+ */
+int serial_havechar(void)
+{
+ /* Return if data is already read */
+ if (valid_data)
+ return 1;
+
+ /* Read data from the FIFO */
+ if (msm_boot_uart_dm_read(&word, &valid_data, 0) !=
+ MSM_BOOT_UART_DM_E_SUCCESS)
+ return 0;
+
+ return 1;
+}
+
+/**
+ * ipq40xx_serial_getc - reads a character
+ *
+ * Returns the character read from serial port.
+ */
+int serial_getchar(void)
+{
+ uint8_t byte;
+
+ while (!serial_havechar())
+ ; /* wait for incoming data */
+
+ byte = (uint8_t)(word & 0xff);
+ word = word >> 8;
+ valid_data--;
+
+ return byte;
+}
+
+static struct console_input_driver consin = {};
+static struct console_output_driver consout = {};
+
+/* For simplicity sake let's rely on coreboot initalizing the UART. */
+void serial_console_init(void)
+{
+ struct cb_serial *sc_ptr = lib_sysinfo.serial;
+
+ if (!sc_ptr)
+ return;
+
+ consin.havekey = serial_havechar;
+ consin.getchar = serial_getchar;
+
+ consout.putchar = serial_putchar;
+
+ console_add_output_driver(&consout);
+ console_add_input_driver(&consin);
+}
diff --git a/payloads/libpayload/drivers/timer/ipq40xx.c b/payloads/libpayload/drivers/timer/ipq40xx.c
new file mode 100644
index 0000000..0ca2600
--- /dev/null
+++ b/payloads/libpayload/drivers/timer/ipq40xx.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2015, 2016, The Linux Foundation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * * Neither the name of The Linux Foundation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <libpayload.h>
+
+#define GCNT_FREQ_MHZ 48
+
+#define MSM_TMR_BASE ((void *)0x004a1000u)
+#define GCNT_CNTCV_LO (MSM_TMR_BASE + 0x1000)
+#define GCNT_CNTCV_HI (MSM_TMR_BASE + 0x1004)
+
+uint64_t timer_hz(void)
+{
+ return GCNT_FREQ_MHZ * 1000 * 1000;
+}
+
+uint64_t timer_raw_value(void)
+{
+ uint32_t hi, lo;
+
+ do {
+ hi = read32(GCNT_CNTCV_HI);
+ lo = read32(GCNT_CNTCV_LO);
+ } while (hi != read32(GCNT_CNTCV_HI));
+
+ return ((((uint64_t)hi) << 32) | lo);
+}
More information about the coreboot-gerrit
mailing list