[coreboot-gerrit] Patch set updated for coreboot: google/reef: Update EMMC DLL settings
Lijian Zhao (lijian.zhao@intel.com)
gerrit at coreboot.org
Tue Jun 14 02:28:06 CEST 2016
Lijian Zhao (lijian.zhao at intel.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/15156
-gerrit
commit dadbc6e10ea3428ba18b5017a4e9deada6200591
Author: Zhao, Lijian <lijian.zhao at intel.com>
Date: Fri Jun 10 16:11:08 2016 -0700
google/reef: Update EMMC DLL settings
Update EMMC DLL setting for reef board, after that system can
boot up into EMMC successfully.
BUG=chrome-os-partner:54228
TEST=Boot up into EMMC and check with Rootdev
Change-Id: I614cd624dce9069c5565599a955f87906bcea53b
Signed-off-by: Zhao, Lijian <lijian.zhao at intel.com>
---
src/mainboard/google/reef/devicetree.cb | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/src/mainboard/google/reef/devicetree.cb b/src/mainboard/google/reef/devicetree.cb
index f442872..9775dc8 100644
--- a/src/mainboard/google/reef/devicetree.cb
+++ b/src/mainboard/google/reef/devicetree.cb
@@ -6,6 +6,31 @@ chip soc/intel/apollolake
register "pcie_rp4_clkreq_pin" = "0" # wifi/bt
+ # EMMC TX DATA Delay 1#
+ # 0x0C[14:8] stands for 12*125 = 1500 pSec delay for HS400
+ # 0x11[6:0] stands for 17*125 = 2125 pSec delay for SDR104/HS200
+ register "emmc_tx_data_cntl1" = "0x0C11" # HS400 required
+
+ # EMMC TX DATA Delay 2#
+ # 0x1C[30:24] stands for 28*125 = 3500 pSec delay for SDR50
+ # 0x1C[22:16] stands for 28*125 = 3500 pSec delay for DDR50
+ # 0x1C[14:8] stands for 28*125 = 3500 pSec delay for SDR25/HS50
+ # 0x00[6:0] stands for 0 delay for SDR12/Compatibility mode
+ register "emmc_tx_data_cntl2" = "0x1c1c1c00"
+
+ # EMMC RX CMD/DATA Delay 1#
+ # 0x1C[30:24] stands for 28*125 = 3500 pSec delay for SDR50
+ # 0x1C[22:16] stands for 28*125 = 3500 pSec delay for DDR50
+ # 0x1C[14:8] stands for 28*125 = 3500 pSec delay for SDR25/HS50
+ # 0x00[6:0] stands for 0 delay for SDR12/Compatibility
+ register "emmc_rx_cmd_data_cntl1" = "0x1c1c1c00"
+
+ # EMMC RX CMD/DATA Delay 2#
+ # 0x01[17:16] stands for Rx Clock before Output Buffer
+ # 0x00[14:8] stands for 0 delay for Auto Tuning Mode
+ # 0x1C[6:0] stands for 28*125 = 3500 pSec delay for SDR104/HS200
+ register "emmc_rx_cmd_data_cntl2" = "0x1001c"
+
device domain 0 on
device pci 00.0 on end # - Host Bridge
device pci 00.1 on end # - DPTF
More information about the coreboot-gerrit
mailing list