[coreboot-gerrit] Patch set updated for coreboot: src/cpu: Capitalize CPU
HAOUAS Elyes (ehaouas@noos.fr)
gerrit at coreboot.org
Thu Jul 28 19:01:03 CEST 2016
HAOUAS Elyes (ehaouas at noos.fr) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/15934
-gerrit
commit 388c040ea8068ac9f930df2ee74d367feb4a9ed5
Author: Elyes HAOUAS <ehaouas at noos.fr>
Date: Thu Jul 28 18:58:27 2016 +0200
src/cpu: Capitalize CPU
Change-Id: I58d5c16de796a91fa14d8db78722024266c09a94
Signed-off-by: Elyes HAOUAS <ehaouas at noos.fr>
---
src/cpu/amd/agesa/family10/model_10_init.c | 2 +-
src/cpu/amd/agesa/family12/model_12_init.c | 2 +-
src/cpu/amd/agesa/family14/model_14_init.c | 2 +-
src/cpu/amd/agesa/family15/model_15_init.c | 2 +-
src/cpu/amd/agesa/family15rl/model_15_init.c | 2 +-
src/cpu/amd/agesa/family15tn/model_15_init.c | 2 +-
src/cpu/amd/agesa/family16kb/model_16_init.c | 2 +-
src/cpu/amd/family_10h-family_15h/init_cpus.c | 2 +-
.../amd/family_10h-family_15h/model_10xxx_init.c | 2 +-
src/cpu/amd/geode_gx2/geode_gx2_init.c | 2 +-
src/cpu/amd/geode_lx/cpubug.c | 2 +-
src/cpu/amd/geode_lx/geode_lx_init.c | 2 +-
src/cpu/amd/model_fxx/fidvid.c | 2 +-
src/cpu/amd/model_fxx/init_cpus.c | 4 +-
src/cpu/amd/model_fxx/model_fxx_init.c | 8 +-
src/cpu/amd/pi/00630F01/model_15_init.c | 2 +-
src/cpu/amd/pi/00660F01/model_15_init.c | 2 +-
src/cpu/amd/pi/00730F01/model_16_init.c | 2 +-
src/cpu/dmp/vortex86ex/biosdata_ex.S | 4 +-
src/cpu/intel/Makefile.inc | 2 +-
src/cpu/intel/ep80579/ep80579_init.c | 2 +-
src/cpu/intel/fsp_model_206ax/model_206ax_init.c | 8 +-
src/cpu/intel/fsp_model_406dx/model_406dx_init.c | 8 +-
src/cpu/intel/haswell/haswell_init.c | 2 +-
src/cpu/intel/hyperthreading/intel_sibling.c | 8 +-
src/cpu/intel/microcode/Makefile.inc | 2 +-
src/cpu/intel/model_1067x/model_1067x_init.c | 4 +-
src/cpu/intel/model_106cx/model_106cx_init.c | 4 +-
src/cpu/intel/model_2065x/model_2065x_init.c | 8 +-
src/cpu/intel/model_206ax/model_206ax_init.c | 8 +-
src/cpu/intel/model_65x/model_65x_init.c | 2 +-
src/cpu/intel/model_67x/model_67x_init.c | 2 +-
src/cpu/intel/model_68x/model_68x_init.c | 2 +-
src/cpu/intel/model_69x/model_69x_init.c | 2 +-
src/cpu/intel/model_6bx/model_6bx_init.c | 2 +-
src/cpu/intel/model_6dx/model_6dx_init.c | 2 +-
src/cpu/intel/model_6ex/model_6ex_init.c | 4 +-
src/cpu/intel/model_6fx/model_6fx_init.c | 4 +-
src/cpu/intel/model_6xx/model_6xx_init.c | 2 +-
src/cpu/intel/model_f0x/model_f0x_init.c | 2 +-
src/cpu/intel/model_f1x/model_f1x_init.c | 2 +-
src/cpu/intel/model_f2x/model_f2x_init.c | 4 +-
src/cpu/intel/model_f3x/model_f3x_init.c | 4 +-
src/cpu/intel/model_f4x/model_f4x_init.c | 4 +-
src/cpu/via/c3/c3_init.c | 2 +-
src/cpu/via/c7/c7_init.c | 4 +-
src/cpu/via/nano/nano_init.c | 2 +-
src/cpu/x86/16bit/entry16.inc | 2 +-
src/cpu/x86/lapic/lapic_cpu_init.c | 16 +-
src/cpu/x86/mp_init.c | 12 +-
src/cpu/x86/sipi_vector.S | 4 +-
src/cpu/x86/smm/smm_module_loader.c | 8 +-
src/cpu/x86/smm/smm_stub.S | 8 +-
src/cpu/x86/smm/smmrelocate.S | 4 +-
util/lint/checkpatch.pl | 5373 --------------------
55 files changed, 102 insertions(+), 5475 deletions(-)
diff --git a/src/cpu/amd/agesa/family10/model_10_init.c b/src/cpu/amd/agesa/family10/model_10_init.c
index 12dab91..22a92e1 100644
--- a/src/cpu/amd/agesa/family10/model_10_init.c
+++ b/src/cpu/amd/agesa/family10/model_10_init.c
@@ -57,7 +57,7 @@ static void model_10_init(device_t dev)
enable_cache();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
/* Set the processor name string */
diff --git a/src/cpu/amd/agesa/family12/model_12_init.c b/src/cpu/amd/agesa/family12/model_12_init.c
index 8fdd62c..a0b9479 100644
--- a/src/cpu/amd/agesa/family12/model_12_init.c
+++ b/src/cpu/amd/agesa/family12/model_12_init.c
@@ -62,7 +62,7 @@ static void model_12_init(device_t dev)
enable_cache();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
/* Set the processor name string */
diff --git a/src/cpu/amd/agesa/family14/model_14_init.c b/src/cpu/amd/agesa/family14/model_14_init.c
index 159ea02..84ce755 100644
--- a/src/cpu/amd/agesa/family14/model_14_init.c
+++ b/src/cpu/amd/agesa/family14/model_14_init.c
@@ -82,7 +82,7 @@ static void model_14_init(device_t dev)
wrmsr(MCI_STATUS + (i * 4), msr);
}
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
diff --git a/src/cpu/amd/agesa/family15/model_15_init.c b/src/cpu/amd/agesa/family15/model_15_init.c
index d035f5e..525959f 100644
--- a/src/cpu/amd/agesa/family15/model_15_init.c
+++ b/src/cpu/amd/agesa/family15/model_15_init.c
@@ -67,7 +67,7 @@ static void model_15_init(device_t dev)
wrmsr(MCI_STATUS + (i * 4), msr);
}
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
diff --git a/src/cpu/amd/agesa/family15rl/model_15_init.c b/src/cpu/amd/agesa/family15rl/model_15_init.c
index 2c71d3e..0492be3 100644
--- a/src/cpu/amd/agesa/family15rl/model_15_init.c
+++ b/src/cpu/amd/agesa/family15rl/model_15_init.c
@@ -81,7 +81,7 @@ static void model_15_init(device_t dev)
wrmsr(MCI_STATUS + (i * 4), msr);
}
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
diff --git a/src/cpu/amd/agesa/family15tn/model_15_init.c b/src/cpu/amd/agesa/family15tn/model_15_init.c
index 77357e9..27aedaf 100644
--- a/src/cpu/amd/agesa/family15tn/model_15_init.c
+++ b/src/cpu/amd/agesa/family15tn/model_15_init.c
@@ -80,7 +80,7 @@ static void model_15_init(device_t dev)
wrmsr(MCI_STATUS + (i * 4), msr);
}
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
diff --git a/src/cpu/amd/agesa/family16kb/model_16_init.c b/src/cpu/amd/agesa/family16kb/model_16_init.c
index bf7e3bf..3d3afec 100644
--- a/src/cpu/amd/agesa/family16kb/model_16_init.c
+++ b/src/cpu/amd/agesa/family16kb/model_16_init.c
@@ -79,7 +79,7 @@ static void model_16_init(device_t dev)
}
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
#if IS_ENABLED(CONFIG_LOGICAL_CPUS)
diff --git a/src/cpu/amd/family_10h-family_15h/init_cpus.c b/src/cpu/amd/family_10h-family_15h/init_cpus.c
index 0edded2..6fefc3b 100644
--- a/src/cpu/amd/family_10h-family_15h/init_cpus.c
+++ b/src/cpu/amd/family_10h-family_15h/init_cpus.c
@@ -257,7 +257,7 @@ uint32_t wait_cpu_state(uint32_t apicid, uint32_t state, uint32_t state2)
continue;
if ((readback & 0x3f) == state || (readback & 0x3f) == state2 || (readback & 0x3f) == F10_APSTATE_RESET) {
timeout = 0;
- break; //target cpu is in stage started
+ break; //target CPU is in stage started
}
}
if (timeout) {
diff --git a/src/cpu/amd/family_10h-family_15h/model_10xxx_init.c b/src/cpu/amd/family_10h-family_15h/model_10xxx_init.c
index 153fb10..a41374d 100644
--- a/src/cpu/amd/family_10h-family_15h/model_10xxx_init.c
+++ b/src/cpu/amd/family_10h-family_15h/model_10xxx_init.c
@@ -133,7 +133,7 @@ static void model_10xxx_init(device_t dev)
enable_cache();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
/* Set the processor name string */
diff --git a/src/cpu/amd/geode_gx2/geode_gx2_init.c b/src/cpu/amd/geode_gx2/geode_gx2_init.c
index b8f56db..b6bad4d 100644
--- a/src/cpu/amd/geode_gx2/geode_gx2_init.c
+++ b/src/cpu/amd/geode_gx2/geode_gx2_init.c
@@ -22,7 +22,7 @@ static void geode_gx2_init(device_t dev)
/* Turn on caching if we haven't already */
x86_enable_cache();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
//setup_lapic();
vsm_end_post_smi();
diff --git a/src/cpu/amd/geode_lx/cpubug.c b/src/cpu/amd/geode_lx/cpubug.c
index 6638a83..cf8c2e2 100644
--- a/src/cpu/amd/geode_lx/cpubug.c
+++ b/src/cpu/amd/geode_lx/cpubug.c
@@ -75,7 +75,7 @@ static void disablememoryreadorder(void)
wrmsr(MC_CF8F_DATA, msr);
}
-/* For cpu version C3. Should be the only released version */
+/* For CPU version C3. Should be the only released version */
void cpubug(void)
{
pcideadlock();
diff --git a/src/cpu/amd/geode_lx/geode_lx_init.c b/src/cpu/amd/geode_lx/geode_lx_init.c
index 5cda46b..335caa3 100644
--- a/src/cpu/amd/geode_lx/geode_lx_init.c
+++ b/src/cpu/amd/geode_lx/geode_lx_init.c
@@ -40,7 +40,7 @@ static void geode_lx_init(device_t dev)
/* Turn on caching if we haven't already */
x86_enable_cache();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
//setup_lapic();
// do VSA late init
diff --git a/src/cpu/amd/model_fxx/fidvid.c b/src/cpu/amd/model_fxx/fidvid.c
index 03415d1..9e6dfa0 100644
--- a/src/cpu/amd/model_fxx/fidvid.c
+++ b/src/cpu/amd/model_fxx/fidvid.c
@@ -401,7 +401,7 @@ static void init_fidvid_ap(unsigned bsp_apicid, unsigned apicid)
0)
continue;
if (((readback >> 24) & 0xff) == apicid)
- break; /* it is this cpu turn */
+ break; /* it is this CPU turn */
}
if (loop > 0) {
diff --git a/src/cpu/amd/model_fxx/init_cpus.c b/src/cpu/amd/model_fxx/init_cpus.c
index 51e1b7c..2ea4fb9 100644
--- a/src/cpu/amd/model_fxx/init_cpus.c
+++ b/src/cpu/amd/model_fxx/init_cpus.c
@@ -157,7 +157,7 @@ static u32 wait_cpu_state(u32 apicid, u32 state)
continue;
if ((readback & 0xff) == state) {
timeout = 0;
- break; //target cpu is in stage started
+ break; //target CPU is in stage started
}
}
if (timeout) {
@@ -303,7 +303,7 @@ static u32 init_cpus(u32 cpu_init_detectedx)
// start_other_core(id.nodeid); // start second core in first cpu, only allowed for nb_cfg_54 is not set
}
//here don't need to wait
- lapic_write(LAPIC_MSG_REG, (apicid << 24) | 0x33); // mark the cpu is started
+ lapic_write(LAPIC_MSG_REG, (apicid << 24) | 0x33); // mark the CPU is started
if (apicid != bsp_apicid) {
u32 timeout = 1;
diff --git a/src/cpu/amd/model_fxx/model_fxx_init.c b/src/cpu/amd/model_fxx/model_fxx_init.c
index cf0b08a..e22eae4 100644
--- a/src/cpu/amd/model_fxx/model_fxx_init.c
+++ b/src/cpu/amd/model_fxx/model_fxx_init.c
@@ -249,15 +249,15 @@ static void init_ecc_memory(unsigned node_id)
f1_dev = dev_find_slot(0, PCI_DEVFN(0x18 + node_id, 1));
if (!f1_dev) {
- die("Cannot find cpu function 1\n");
+ die("Cannot find CPU function 1\n");
}
f2_dev = dev_find_slot(0, PCI_DEVFN(0x18 + node_id, 2));
if (!f2_dev) {
- die("Cannot find cpu function 2\n");
+ die("Cannot find CPU function 2\n");
}
f3_dev = dev_find_slot(0, PCI_DEVFN(0x18 + node_id, 3));
if (!f3_dev) {
- die("Cannot find cpu function 3\n");
+ die("Cannot find CPU function 3\n");
}
/* See if we scrubbing should be enabled */
@@ -508,7 +508,7 @@ static void model_fxx_init(device_t dev)
/* Set the processor name string */
init_processor_name();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
#if CONFIG_LOGICAL_CPUS
diff --git a/src/cpu/amd/pi/00630F01/model_15_init.c b/src/cpu/amd/pi/00630F01/model_15_init.c
index 42afae3..7c4d171 100644
--- a/src/cpu/amd/pi/00630F01/model_15_init.c
+++ b/src/cpu/amd/pi/00630F01/model_15_init.c
@@ -79,7 +79,7 @@ static void model_15_init(device_t dev)
}
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
#if CONFIG_LOGICAL_CPUS
diff --git a/src/cpu/amd/pi/00660F01/model_15_init.c b/src/cpu/amd/pi/00660F01/model_15_init.c
index 8fe6340..de7ee38 100644
--- a/src/cpu/amd/pi/00660F01/model_15_init.c
+++ b/src/cpu/amd/pi/00660F01/model_15_init.c
@@ -94,7 +94,7 @@ static void model_15_init(device_t dev)
}
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
#if CONFIG_LOGICAL_CPUS
diff --git a/src/cpu/amd/pi/00730F01/model_16_init.c b/src/cpu/amd/pi/00730F01/model_16_init.c
index 00a21e9..6cb3009 100644
--- a/src/cpu/amd/pi/00730F01/model_16_init.c
+++ b/src/cpu/amd/pi/00730F01/model_16_init.c
@@ -77,7 +77,7 @@ static void model_16_init(device_t dev)
}
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
#if CONFIG_LOGICAL_CPUS
diff --git a/src/cpu/dmp/vortex86ex/biosdata_ex.S b/src/cpu/dmp/vortex86ex/biosdata_ex.S
index 5ed17c6..2defe63 100644
--- a/src/cpu/dmp/vortex86ex/biosdata_ex.S
+++ b/src/cpu/dmp/vortex86ex/biosdata_ex.S
@@ -24,8 +24,8 @@ DDR3
CPU/DRAM/PCI B6 B7 BB BC BD BF
200/200/33 30 03 0F 02 8F 07
300/300/33 48 03 0F 02 1F 07
-300/300/33 48 03 0F 3A DF 07 ; write leveling disable, cpu bypass disable
-300/300/33 48 03 0F 22 3F 07 ; cpu bypass disable
+300/300/33 48 03 0F 3A DF 07 ; write leveling disable, CPU bypass disable
+300/300/33 48 03 0F 22 3F 07 ; CPU bypass disable
300/300/100 48 03 23 02 7F 07
400/200/33 60 43 0F 02 3F 07 ; without 200MHz timing, so set 300MHz timing
400/200/100 60 43 23 02 4F 07
diff --git a/src/cpu/intel/Makefile.inc b/src/cpu/intel/Makefile.inc
index bd39039..536b40e 100644
--- a/src/cpu/intel/Makefile.inc
+++ b/src/cpu/intel/Makefile.inc
@@ -1,5 +1,5 @@
# Note: From here on down, we are socket-centric. Socket choice determines
-# what other cpu files are included.
+# what other CPU files are included.
#
# Therefore: ONLY include Makefile.inc from socket directories!
diff --git a/src/cpu/intel/ep80579/ep80579_init.c b/src/cpu/intel/ep80579/ep80579_init.c
index 05c5bb1..3093975 100644
--- a/src/cpu/intel/ep80579/ep80579_init.c
+++ b/src/cpu/intel/ep80579/ep80579_init.c
@@ -34,7 +34,7 @@ static void ep80579_init(struct device *dev)
/* Update the microcode */
intel_update_microcode_from_cbfs();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
};
diff --git a/src/cpu/intel/fsp_model_206ax/model_206ax_init.c b/src/cpu/intel/fsp_model_206ax/model_206ax_init.c
index da1ea2b..50d2bee 100644
--- a/src/cpu/intel/fsp_model_206ax/model_206ax_init.c
+++ b/src/cpu/intel/fsp_model_206ax/model_206ax_init.c
@@ -334,7 +334,7 @@ static void intel_cores_init(struct device *cpu)
struct device_path cpu_path;
struct device *new;
- /* Build the cpu device path */
+ /* Build the CPU device path */
cpu_path.type = DEVICE_PATH_APIC;
cpu_path.apic.apic_id =
cpu->path.apic.apic_id + i;
@@ -343,7 +343,7 @@ static void intel_cores_init(struct device *cpu)
if (threads_per_core == 1)
cpu_path.apic.apic_id <<= 1;
- /* Allocate the new cpu device structure */
+ /* Allocate the new CPU device structure */
new = alloc_dev(cpu->bus, &cpu_path);
if (!new)
continue;
@@ -353,7 +353,7 @@ static void intel_cores_init(struct device *cpu)
new->path.apic.apic_id);
#if CONFIG_SMP && CONFIG_MAX_CPUS > 1
- /* Start the new cpu */
+ /* Start thenew CPU */
if (!start_cpu(new)) {
/* Record the error in cpu? */
printk(BIOS_ERR, "CPU %u would not start!\n",
@@ -386,7 +386,7 @@ static void model_206ax_init(struct device *cpu)
/* Setup Page Attribute Tables (PAT) */
// TODO set up PAT
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
enable_lapic_tpr();
setup_lapic();
diff --git a/src/cpu/intel/fsp_model_406dx/model_406dx_init.c b/src/cpu/intel/fsp_model_406dx/model_406dx_init.c
index 17c46b3..b457453 100644
--- a/src/cpu/intel/fsp_model_406dx/model_406dx_init.c
+++ b/src/cpu/intel/fsp_model_406dx/model_406dx_init.c
@@ -133,7 +133,7 @@ static void intel_cores_init(struct device *cpu)
struct device_path cpu_path;
struct device *new;
- /* Build the cpu device path */
+ /* Build the CPU device path */
cpu_path.type = DEVICE_PATH_APIC;
cpu_path.apic.apic_id =
cpu->path.apic.apic_id + i;
@@ -142,7 +142,7 @@ static void intel_cores_init(struct device *cpu)
if (threads_per_core == 1)
cpu_path.apic.apic_id <<= 1;
- /* Allocate the new cpu device structure */
+ /* Allocate the new CPU device structure */
new = alloc_dev(cpu->bus, &cpu_path);
if (!new)
continue;
@@ -152,7 +152,7 @@ static void intel_cores_init(struct device *cpu)
new->path.apic.apic_id);
#if IS_ENABLED(CONFIG_SMP) && CONFIG_MAX_CPUS > 1
- /* Start the new cpu */
+ /* Start thenew CPU */
if (!start_cpu(new)) {
/* Record the error in cpu? */
printk(BIOS_ERR, "CPU %u would not start!\n",
@@ -182,7 +182,7 @@ static void model_406dx_init(struct device *cpu)
x86_mtrr_check();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
/* Enable virtualization */
diff --git a/src/cpu/intel/haswell/haswell_init.c b/src/cpu/intel/haswell/haswell_init.c
index 74147ab..799b66c 100644
--- a/src/cpu/intel/haswell/haswell_init.c
+++ b/src/cpu/intel/haswell/haswell_init.c
@@ -720,7 +720,7 @@ static void haswell_init(struct device *cpu)
/* Clear out pending MCEs */
configure_mca();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
enable_lapic_tpr();
setup_lapic();
diff --git a/src/cpu/intel/hyperthreading/intel_sibling.c b/src/cpu/intel/hyperthreading/intel_sibling.c
index 678ad2d..de59c18 100644
--- a/src/cpu/intel/hyperthreading/intel_sibling.c
+++ b/src/cpu/intel/hyperthreading/intel_sibling.c
@@ -21,7 +21,7 @@
#include <assert.h>
#if CONFIG_PARALLEL_CPU_INIT
-#error Intel hyper-threading requires serialized cpu init
+#error Intel hyper-threading requires serialized CPU init
#endif
static int first_time = 1;
@@ -84,16 +84,16 @@ void intel_sibling_init(struct device *cpu)
return;
}
- /* I am the primary cpu start up my siblings */
+ /* I am the primary CPU start up my siblings */
for(i = 1; i < siblings; i++) {
struct device_path cpu_path;
struct device *new;
- /* Build the cpu device path */
+ /* Build the CPU device path */
cpu_path.type = DEVICE_PATH_APIC;
cpu_path.apic.apic_id = cpu->path.apic.apic_id + i;
- /* Allocate new cpu device structure iff sibling CPU
+ /* Allocate new CPU device structure iff sibling CPU
* was not in static device tree.
*/
new = alloc_find_dev(cpu->bus, &cpu_path);
diff --git a/src/cpu/intel/microcode/Makefile.inc b/src/cpu/intel/microcode/Makefile.inc
index 7452973..f589430 100644
--- a/src/cpu/intel/microcode/Makefile.inc
+++ b/src/cpu/intel/microcode/Makefile.inc
@@ -1,5 +1,5 @@
################################################################################
-## One small file with the awesome super-power of updating the cpu microcode
+## One small file with the awesome super-power of updating the CPU microcode
## directly from CBFS. You have been WARNED!!!
################################################################################
ramstage-$(CONFIG_SUPPORT_CPU_UCODE_IN_CBFS) += microcode.c
diff --git a/src/cpu/intel/model_1067x/model_1067x_init.c b/src/cpu/intel/model_1067x/model_1067x_init.c
index 0242a44..1812084 100644
--- a/src/cpu/intel/model_1067x/model_1067x_init.c
+++ b/src/cpu/intel/model_1067x/model_1067x_init.c
@@ -322,7 +322,7 @@ static void model_1067x_init(struct device *cpu)
x86_setup_mtrrs();
x86_mtrr_check();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
/* Initialize the APIC timer */
@@ -347,7 +347,7 @@ static void model_1067x_init(struct device *cpu)
/* PIC thermal sensor control */
configure_pic_thermal_sensors(tm2, quad);
- /* Start up my cpu siblings */
+ /* Start up my CPU siblings */
intel_sibling_init(cpu);
}
diff --git a/src/cpu/intel/model_106cx/model_106cx_init.c b/src/cpu/intel/model_106cx/model_106cx_init.c
index 82552d8..ac4606b 100644
--- a/src/cpu/intel/model_106cx/model_106cx_init.c
+++ b/src/cpu/intel/model_106cx/model_106cx_init.c
@@ -124,7 +124,7 @@ static void model_106cx_init(struct device *cpu)
x86_setup_mtrrs();
x86_mtrr_check();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
/* Enable virtualization */
@@ -138,7 +138,7 @@ static void model_106cx_init(struct device *cpu)
/* TODO: PIC thermal sensor control */
- /* Start up my cpu siblings */
+ /* Start up my CPU siblings */
intel_sibling_init(cpu);
}
diff --git a/src/cpu/intel/model_2065x/model_2065x_init.c b/src/cpu/intel/model_2065x/model_2065x_init.c
index 4005b3d..4bcab2a 100644
--- a/src/cpu/intel/model_2065x/model_2065x_init.c
+++ b/src/cpu/intel/model_2065x/model_2065x_init.c
@@ -329,13 +329,13 @@ static void intel_cores_init(struct device *cpu)
struct device_path cpu_path;
struct device *new;
- /* Build the cpu device path */
+ /* Build the CPU device path */
cpu_path.type = DEVICE_PATH_APIC;
cpu_path.apic.apic_id =
cpu->path.apic.apic_id + (i % threads_per_core)
+ ((i / threads_per_core) << 2);
- /* Allocate the new cpu device structure */
+ /* Allocate the new CPU device structure */
new = alloc_dev(cpu->bus, &cpu_path);
if (!new)
continue;
@@ -345,7 +345,7 @@ static void intel_cores_init(struct device *cpu)
new->path.apic.apic_id);
#if CONFIG_SMP && CONFIG_MAX_CPUS > 1
- /* Start the new cpu */
+ /* Start thenew CPU */
if (!start_cpu(new)) {
/* Record the error in cpu? */
printk(BIOS_ERR, "CPU %u would not start!\n",
@@ -379,7 +379,7 @@ static void model_2065x_init(struct device *cpu)
/* Setup Page Attribute Tables (PAT) */
// TODO set up PAT
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
enable_lapic_tpr();
setup_lapic();
diff --git a/src/cpu/intel/model_206ax/model_206ax_init.c b/src/cpu/intel/model_206ax/model_206ax_init.c
index 7575603..1b875f6 100644
--- a/src/cpu/intel/model_206ax/model_206ax_init.c
+++ b/src/cpu/intel/model_206ax/model_206ax_init.c
@@ -520,7 +520,7 @@ static void intel_cores_init(struct device *cpu)
struct device_path cpu_path;
struct device *new;
- /* Build the cpu device path */
+ /* Build the CPU device path */
cpu_path.type = DEVICE_PATH_APIC;
cpu_path.apic.apic_id =
cpu->path.apic.apic_id + i;
@@ -529,7 +529,7 @@ static void intel_cores_init(struct device *cpu)
if (threads_per_core == 1)
cpu_path.apic.apic_id <<= 1;
- /* Allocate the new cpu device structure */
+ /* Allocate the new CPU device structure */
new = alloc_dev(cpu->bus, &cpu_path);
if (!new)
continue;
@@ -539,7 +539,7 @@ static void intel_cores_init(struct device *cpu)
new->path.apic.apic_id);
#if CONFIG_SMP && CONFIG_MAX_CPUS > 1
- /* Start the new cpu */
+ /* Start thenew CPU */
if (!start_cpu(new)) {
/* Record the error in cpu? */
printk(BIOS_ERR, "CPU %u would not start!\n",
@@ -572,7 +572,7 @@ static void model_206ax_init(struct device *cpu)
/* Setup Page Attribute Tables (PAT) */
// TODO set up PAT
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
enable_lapic_tpr();
setup_lapic();
diff --git a/src/cpu/intel/model_65x/model_65x_init.c b/src/cpu/intel/model_65x/model_65x_init.c
index 3cce098..14da632 100644
--- a/src/cpu/intel/model_65x/model_65x_init.c
+++ b/src/cpu/intel/model_65x/model_65x_init.c
@@ -36,7 +36,7 @@ static void model_65x_init(struct device *dev)
x86_setup_mtrrs();
x86_mtrr_check();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
};
diff --git a/src/cpu/intel/model_67x/model_67x_init.c b/src/cpu/intel/model_67x/model_67x_init.c
index 631e3515..d7c22fc 100644
--- a/src/cpu/intel/model_67x/model_67x_init.c
+++ b/src/cpu/intel/model_67x/model_67x_init.c
@@ -40,7 +40,7 @@ static void model_67x_init(struct device *cpu)
x86_setup_mtrrs();
x86_mtrr_check();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
}
diff --git a/src/cpu/intel/model_68x/model_68x_init.c b/src/cpu/intel/model_68x/model_68x_init.c
index 3adee6f..e276791 100644
--- a/src/cpu/intel/model_68x/model_68x_init.c
+++ b/src/cpu/intel/model_68x/model_68x_init.c
@@ -44,7 +44,7 @@ static void model_68x_init(struct device *cpu)
x86_setup_mtrrs();
x86_mtrr_check();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
}
diff --git a/src/cpu/intel/model_69x/model_69x_init.c b/src/cpu/intel/model_69x/model_69x_init.c
index 214673a..d283722 100644
--- a/src/cpu/intel/model_69x/model_69x_init.c
+++ b/src/cpu/intel/model_69x/model_69x_init.c
@@ -18,7 +18,7 @@ static void model_69x_init(struct device *dev)
/* Update the microcode */
intel_update_microcode_from_cbfs();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
};
diff --git a/src/cpu/intel/model_6bx/model_6bx_init.c b/src/cpu/intel/model_6bx/model_6bx_init.c
index b2e5585..36da288 100644
--- a/src/cpu/intel/model_6bx/model_6bx_init.c
+++ b/src/cpu/intel/model_6bx/model_6bx_init.c
@@ -44,7 +44,7 @@ static void model_6bx_init(struct device *cpu)
x86_setup_mtrrs();
x86_mtrr_check();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
}
diff --git a/src/cpu/intel/model_6dx/model_6dx_init.c b/src/cpu/intel/model_6dx/model_6dx_init.c
index 04b73ad..73f71d8 100644
--- a/src/cpu/intel/model_6dx/model_6dx_init.c
+++ b/src/cpu/intel/model_6dx/model_6dx_init.c
@@ -31,7 +31,7 @@ static void model_6dx_init(struct device *dev)
/* Update the microcode */
intel_update_microcode_from_cbfs();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
};
diff --git a/src/cpu/intel/model_6ex/model_6ex_init.c b/src/cpu/intel/model_6ex/model_6ex_init.c
index 6fa6d3a..bc926a8 100644
--- a/src/cpu/intel/model_6ex/model_6ex_init.c
+++ b/src/cpu/intel/model_6ex/model_6ex_init.c
@@ -154,7 +154,7 @@ static void model_6ex_init(struct device *cpu)
x86_setup_mtrrs();
x86_mtrr_check();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
/* Enable virtualization */
@@ -169,7 +169,7 @@ static void model_6ex_init(struct device *cpu)
/* PIC thermal sensor control */
configure_pic_thermal_sensors();
- /* Start up my cpu siblings */
+ /* Start up my CPU siblings */
intel_sibling_init(cpu);
}
diff --git a/src/cpu/intel/model_6fx/model_6fx_init.c b/src/cpu/intel/model_6fx/model_6fx_init.c
index 6cd2b12..30542e6 100644
--- a/src/cpu/intel/model_6fx/model_6fx_init.c
+++ b/src/cpu/intel/model_6fx/model_6fx_init.c
@@ -177,7 +177,7 @@ static void model_6fx_init(struct device *cpu)
/* Setup Page Attribute Tables (PAT) */
// TODO set up PAT
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
/* Enable virtualization */
@@ -192,7 +192,7 @@ static void model_6fx_init(struct device *cpu)
/* PIC thermal sensor control */
configure_pic_thermal_sensors();
- /* Start up my cpu siblings */
+ /* Start up my CPU siblings */
intel_sibling_init(cpu);
}
diff --git a/src/cpu/intel/model_6xx/model_6xx_init.c b/src/cpu/intel/model_6xx/model_6xx_init.c
index 0f0df22..102af74 100644
--- a/src/cpu/intel/model_6xx/model_6xx_init.c
+++ b/src/cpu/intel/model_6xx/model_6xx_init.c
@@ -31,7 +31,7 @@ static void model_6xx_init(struct device *dev)
/* Update the microcode */
intel_update_microcode_from_cbfs();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
};
diff --git a/src/cpu/intel/model_f0x/model_f0x_init.c b/src/cpu/intel/model_f0x/model_f0x_init.c
index 94c73ce..1eb234f 100644
--- a/src/cpu/intel/model_f0x/model_f0x_init.c
+++ b/src/cpu/intel/model_f0x/model_f0x_init.c
@@ -31,7 +31,7 @@ static void model_f0x_init(struct device *dev)
/* Update the microcode */
intel_update_microcode_from_cbfs();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
};
diff --git a/src/cpu/intel/model_f1x/model_f1x_init.c b/src/cpu/intel/model_f1x/model_f1x_init.c
index 259d7f6..77f442f 100644
--- a/src/cpu/intel/model_f1x/model_f1x_init.c
+++ b/src/cpu/intel/model_f1x/model_f1x_init.c
@@ -31,7 +31,7 @@ static void model_f1x_init(struct device *dev)
/* Update the microcode */
intel_update_microcode_from_cbfs();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
};
diff --git a/src/cpu/intel/model_f2x/model_f2x_init.c b/src/cpu/intel/model_f2x/model_f2x_init.c
index 6b847c0..092afa0 100644
--- a/src/cpu/intel/model_f2x/model_f2x_init.c
+++ b/src/cpu/intel/model_f2x/model_f2x_init.c
@@ -36,10 +36,10 @@ static void model_f2x_init(struct device *cpu)
intel_update_microcode_from_cbfs();
}
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
- /* Start up my cpu siblings */
+ /* Start up my CPU siblings */
intel_sibling_init(cpu);
};
diff --git a/src/cpu/intel/model_f3x/model_f3x_init.c b/src/cpu/intel/model_f3x/model_f3x_init.c
index e85427d..36ca5a6 100644
--- a/src/cpu/intel/model_f3x/model_f3x_init.c
+++ b/src/cpu/intel/model_f3x/model_f3x_init.c
@@ -36,10 +36,10 @@ static void model_f3x_init(struct device *cpu)
intel_update_microcode_from_cbfs();
}
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
- /* Start up my cpu siblings */
+ /* Start up my CPU siblings */
intel_sibling_init(cpu);
};
diff --git a/src/cpu/intel/model_f4x/model_f4x_init.c b/src/cpu/intel/model_f4x/model_f4x_init.c
index 6211209..7d198b3 100644
--- a/src/cpu/intel/model_f4x/model_f4x_init.c
+++ b/src/cpu/intel/model_f4x/model_f4x_init.c
@@ -36,10 +36,10 @@ static void model_f4x_init(struct device *cpu)
intel_update_microcode_from_cbfs();
}
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
- /* Start up my cpu siblings */
+ /* Start up my CPU siblings */
intel_sibling_init(cpu);
};
diff --git a/src/cpu/via/c3/c3_init.c b/src/cpu/via/c3/c3_init.c
index 66cfbca..c28766e 100644
--- a/src/cpu/via/c3/c3_init.c
+++ b/src/cpu/via/c3/c3_init.c
@@ -27,7 +27,7 @@ static void c3_init(struct device *dev)
x86_setup_mtrrs();
x86_mtrr_check();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
};
diff --git a/src/cpu/via/c7/c7_init.c b/src/cpu/via/c7/c7_init.c
index 9b558e9..e7c9fac 100644
--- a/src/cpu/via/c7/c7_init.c
+++ b/src/cpu/via/c7/c7_init.c
@@ -200,7 +200,7 @@ static void c7_init(struct device *dev)
x86_setup_mtrrs();
x86_mtrr_check();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
};
@@ -209,7 +209,7 @@ static struct device_operations cpu_dev_ops = {
};
/* Look in arch/x86/lib/cpu.c:cpu_initialize. If there is no CPU with an exact
- * ID, the cpu mask (stepping) is masked out and the check is repeated. This
+ * ID, the CPU mask (stepping) is masked out and the check is repeated. This
* allows us to keep the table significantly smaller.
*/
diff --git a/src/cpu/via/nano/nano_init.c b/src/cpu/via/nano/nano_init.c
index fdd8b7e..cdf0589 100644
--- a/src/cpu/via/nano/nano_init.c
+++ b/src/cpu/via/nano/nano_init.c
@@ -180,7 +180,7 @@ static void nano_init(struct device *dev)
/* Set up Memory Type Range Registers */
x86_setup_mtrrs();
x86_mtrr_check();
- /* Enable the local cpu apics */
+ /* Enable the local CPU apics */
setup_lapic();
}
diff --git a/src/cpu/x86/16bit/entry16.inc b/src/cpu/x86/16bit/entry16.inc
index be5b730..4c0d323 100644
--- a/src/cpu/x86/16bit/entry16.inc
+++ b/src/cpu/x86/16bit/entry16.inc
@@ -54,7 +54,7 @@ _start16bit:
* If we are hyperthreaded or we have multiple cores it is bad,
* for SMP startup. On Opterons it causes a 5 second delay.
* Invalidating the cache was pure paranoia in any event.
- * If you cpu needs it you can write a cpu dependent version of
+ * If you CPU needs it you can write a CPU dependent version of
* entry16.inc.
*/
diff --git a/src/cpu/x86/lapic/lapic_cpu_init.c b/src/cpu/x86/lapic/lapic_cpu_init.c
index 77e5ba8..1abc28f 100644
--- a/src/cpu/x86/lapic/lapic_cpu_init.c
+++ b/src/cpu/x86/lapic/lapic_cpu_init.c
@@ -242,10 +242,10 @@ static int lapic_start_cpu(unsigned long apicid)
static atomic_t active_cpus = ATOMIC_INIT(1);
/* start_cpu_lock covers last_cpu_index and secondary_stack.
- * Only starting one cpu at a time let's me remove the logic
+ * Only starting one CPU at a time let's me remove the logic
* for select the stack from assembly language.
*
- * In addition communicating by variables to the cpu I
+ * In addition communicating by variables to the CPU I
* am starting allows me to verify it has started before
* start_cpu returns.
*/
@@ -301,12 +301,12 @@ int start_cpu(struct device *cpu)
cpu->enabled = 0;
cpu->initialized = 0;
- /* Start the cpu */
+ /* Start the CPU */
result = lapic_start_cpu(apicid);
if (result) {
result = 0;
- /* Wait 1s or until the new cpu calls in */
+ /* Wait 1s or until thenew CPU calls in */
for(count = 0; count < 100000 ; count++) {
if (secondary_stack == 0) {
result = 1;
@@ -542,23 +542,23 @@ void initialize_cpus(struct bus *cpu_bus)
struct device_path cpu_path;
struct cpu_info *info;
- /* Find the info struct for this cpu */
+ /* Find the info struct for this CPU */
info = cpu_info();
#if NEED_LAPIC == 1
/* Ensure the local apic is enabled */
enable_lapic();
- /* Get the device path of the boot cpu */
+ /* Get the device path of the boot CPU */
cpu_path.type = DEVICE_PATH_APIC;
cpu_path.apic.apic_id = lapicid();
#else
- /* Get the device path of the boot cpu */
+ /* Get the device path of the boot CPU */
cpu_path.type = DEVICE_PATH_CPU;
cpu_path.cpu.id = 0;
#endif
- /* Find the device structure for the boot cpu */
+ /* Find the device structure for the boot CPU */
info->cpu = alloc_find_dev(cpu_bus, &cpu_path);
#if CONFIG_SMP && CONFIG_MAX_CPUS > 1
diff --git a/src/cpu/x86/mp_init.c b/src/cpu/x86/mp_init.c
index b9084c7..ff32015 100644
--- a/src/cpu/x86/mp_init.c
+++ b/src/cpu/x86/mp_init.c
@@ -375,7 +375,7 @@ static int allocate_cpu_devices(struct bus *cpu_bus, struct mp_params *p)
struct device *new;
int apic_id;
- /* Build the cpu device path */
+ /* Build the CPU device path */
cpu_path.type = DEVICE_PATH_APIC;
/* Assuming linear APIC space allocation. */
@@ -385,10 +385,10 @@ static int allocate_cpu_devices(struct bus *cpu_bus, struct mp_params *p)
}
cpu_path.apic.apic_id = apic_id;
- /* Allocate the new cpu device structure */
+ /* Allocate the new CPU device structure */
new = alloc_find_dev(cpu_bus, &cpu_path);
if (new == NULL) {
- printk(BIOS_CRIT, "Could not allocate cpu device\n");
+ printk(BIOS_CRIT, "Could not allocate CPU device\n");
max_cpus--;
}
cpus[i].dev = new;
@@ -577,7 +577,7 @@ static void init_bsp(struct bus *cpu_bus)
*
* The MP initialization has the following properties:
* 1. APs are brought up in parallel.
- * 2. The ordering of coreboot cpu number and APIC ids is not deterministic.
+ * 2. The ordering of coreboot CPU number and APIC ids is not deterministic.
* Therefore, one cannot rely on this property or the order of devices in
* the device tree unless the chipset or mainboard know the APIC ids
* a priori.
@@ -641,7 +641,7 @@ static void mp_initialize_cpu(void)
cpu_initialize(info->index);
}
-/* Returns apic id for coreboot cpu number or < 0 on failure. */
+/* Returns apic id for coreboot CPU number or < 0 on failure. */
static int mp_get_apic_id(int cpu_slot)
{
if (cpu_slot >= CONFIG_MAX_CPUS || cpu_slot < 0)
@@ -843,7 +843,7 @@ static struct mp_flight_record mp_steps[] = {
MP_FR_BLOCK_APS(NULL, load_smm_handlers),
/* Perform SMM relocation. */
MP_FR_NOBLOCK_APS(trigger_smm_relocation, trigger_smm_relocation),
- /* Initialize each cpu through the driver framework. */
+ /* Initialize each CPU through the driver framework. */
MP_FR_BLOCK_APS(mp_initialize_cpu, mp_initialize_cpu),
/* Wait for APs to finish everything else then let them park. */
MP_FR_BLOCK_APS(NULL, NULL),
diff --git a/src/cpu/x86/sipi_vector.S b/src/cpu/x86/sipi_vector.S
index 985b9da..2bcce88 100644
--- a/src/cpu/x86/sipi_vector.S
+++ b/src/cpu/x86/sipi_vector.S
@@ -93,7 +93,7 @@ _start:
mov idt_ptr, %ebx
lidt (%ebx)
- /* Obtain cpu number. */
+ /* Obtain CPU number. */
movl ap_count, %eax
1:
movl %eax, %ecx
@@ -107,7 +107,7 @@ _start:
movl stack_top, %edx
subl %eax, %edx
mov %edx, %esp
- /* Save cpu number. */
+ /* Save CPU number. */
mov %ecx, %esi
/* Determine if one should check microcode versions. */
diff --git a/src/cpu/x86/smm/smm_module_loader.c b/src/cpu/x86/smm/smm_module_loader.c
index 853923d..09ddb03 100644
--- a/src/cpu/x86/smm/smm_module_loader.c
+++ b/src/cpu/x86/smm/smm_module_loader.c
@@ -48,7 +48,7 @@ extern unsigned char _binary_smmstub_start[];
/* This is the SMM handler that the stub calls. It is encoded as an rmodule. */
extern unsigned char _binary_smm_start[];
-/* Per cpu minimum stack size. */
+/* Per CPU minimum stack size. */
#define SMM_MINIMUM_STACK_SIZE 32
/*
@@ -75,7 +75,7 @@ static void smm_place_jmp_instructions(void *entry_start, int stride, int num,
struct smm_entry_ins entry = { .jmp_rel = 0xe9 };
/* Each entry point has an IP value of 0x8000. The SMBASE for each
- * cpu is different so the effective address of the entry instruction
+ * CPU is different so the effective address of the entry instruction
* is different. Therefore, the relative displacement for each entry
* instruction needs to be updated to reflect the current effective
* IP. Additionally, the IP result from the jmp instruction is
@@ -126,7 +126,7 @@ static void *smm_stub_place_stacks(char *base, int size,
}
/* Place the staggered entry points for each CPU. The entry points are
- * staggered by the per cpu SMM save state size extending down from
+ * staggered by the per CPU SMM save state size extending down from
* SMM_ENTRY_OFFSET. */
static void smm_stub_place_staggered_entry_points(char *base,
const struct smm_loader_params *params, const struct rmodule *smm_stub)
@@ -260,7 +260,7 @@ static int smm_module_setup_stub(void *smbase, struct smm_loader_params *params)
stub_params->runtime.smbase = (u32)smbase;
stub_params->runtime.save_state_size = params->per_cpu_save_state_size;
- /* Initialize the APIC id to cpu number table to be 1:1 */
+ /* Initialize the APIC id to CPU number table to be 1:1 */
for (i = 0; i < params->num_concurrent_stacks; i++)
stub_params->runtime.apic_id_to_cpu[i] = i;
diff --git a/src/cpu/x86/smm/smm_stub.S b/src/cpu/x86/smm/smm_stub.S
index 564b200..d1fe7c1 100644
--- a/src/cpu/x86/smm/smm_stub.S
+++ b/src/cpu/x86/smm/smm_stub.S
@@ -40,15 +40,15 @@ smbase:
.long 0
save_state_size:
.long 0
-/* apic_to_cpu_num is a table mapping the default APIC id to cpu num. If the
- * APIC id is found at the given index, the contiguous cpu number is index
+/* apic_to_cpu_num is a table mapping the default APIC id to CPU num. If the
+ * APIC id is found at the given index, the contiguous CPU number is index
* into the table. */
apic_to_cpu_num:
.fill CONFIG_MAX_CPUS,1,0xff
/* end struct smm_runtime */
.data
-/* Provide fallback stack to use when a valid cpu number cannot be found. */
+/* Provide fallback stack to use when a valid CPU number cannot be found. */
fallback_stack_bottom:
.skip 128
fallback_stack_top:
@@ -112,7 +112,7 @@ smm_trampoline32:
inc %ecx
cmp $CONFIG_MAX_CPUS, %ecx
jne 1b
- /* This is bad. One cannot find a stack entry because a cpu num could
+ /* This is bad. One cannot find a stack entry because a CPU num could
* not be assigned. Use the fallback stack and check this condition in
* C handler. */
movl $(fallback_stack_top), %esp
diff --git a/src/cpu/x86/smm/smmrelocate.S b/src/cpu/x86/smm/smmrelocate.S
index 128b694..2502df8 100644
--- a/src/cpu/x86/smm/smmrelocate.S
+++ b/src/cpu/x86/smm/smmrelocate.S
@@ -89,7 +89,7 @@
* 0xa0000-0xa0400 and the stub plus stack would need to go
* at 0xa8000-0xa8100 (example for core 0). That is not enough.
*
- * This means we're basically limited to 16 cpu cores before
+ * This means we're basically limited to 16 CPU cores before
* we need to move the SMM handler to TSEG.
*
* Note: Some versions of Pentium M need their SMBASE aligned to 32k.
@@ -167,7 +167,7 @@ smm_relocate:
outb %al, %dx
movb $'-', %al
outb %al, %dx
- /* calculate ascii of cpu number. More than 9 cores? -> FIXME */
+ /* calculate ascii of CPU number. More than 9 cores? -> FIXME */
movb %cl, %al
addb $'0', %al
outb %al, %dx
diff --git a/util/lint/checkpatch.pl b/util/lint/checkpatch.pl
deleted file mode 100755
index 4544504..0000000
--- a/util/lint/checkpatch.pl
+++ /dev/null
@@ -1,5373 +0,0 @@
-#!/usr/bin/perl -w
-# (c) 2001, Dave Jones. (the file handling bit)
-# (c) 2005, Joel Schopp <jschopp at austin.ibm.com> (the ugly bit)
-# (c) 2007,2008, Andy Whitcroft <apw at uk.ibm.com> (new conditions, test suite)
-# (c) 2008-2010 Andy Whitcroft <apw at canonical.com>
-# (c) 2016 Google Inc.
-# Licensed under the terms of the GNU GPL License version 2
-
-use strict;
-use POSIX;
-use File::Basename;
-use Cwd 'abs_path';
-
-my $P = $0;
-my $D = dirname(abs_path($P));
-
-my $V = '0.32';
-
-use Getopt::Long qw(:config no_auto_abbrev);
-
-my $quiet = 0;
-my $tree = 1;
-my $chk_signoff = 1;
-my $chk_patch = 1;
-my $tst_only;
-my $emacs = 0;
-my $terse = 0;
-my $file = 0;
-my $check = 0;
-my $check_orig = 0;
-my $summary = 1;
-my $mailback = 0;
-my $summary_file = 0;
-my $show_types = 0;
-my $fix = 0;
-my $fix_inplace = 0;
-my $root;
-my %debug;
-my %camelcase = ();
-my %use_type = ();
-my @use = ();
-my %ignore_type = ();
-my @ignore = ();
-my $help = 0;
-my $configuration_file = ".checkpatch.conf";
-my $max_line_length = 80;
-my $ignore_perl_version = 0;
-my $minimum_perl_version = 5.10.0;
-my $min_conf_desc_length = 4;
-my $spelling_file = "$D/spelling.txt";
-
-sub help {
- my ($exitcode) = @_;
-
- print << "EOM";
-Usage: $P [OPTION]... [FILE]...
-Version: $V
-
-Options:
- -q, --quiet quiet
- --no-tree run without a coreboot tree
- --no-signoff do not check for 'Signed-off-by' line
- --patch treat FILE as patchfile (default)
- --emacs emacs compile window format
- --terse one line per report
- -f, --file treat FILE as regular source file
- --subjective, --strict enable more subjective tests
- --types TYPE(,TYPE2...) show only these comma separated message types
- --ignore TYPE(,TYPE2...) ignore various comma separated message types
- --max-line-length=n set the maximum line length, if exceeded, warn
- --min-conf-desc-length=n set the min description length, if shorter, warn
- --show-types show the message "types" in the output
- --root=PATH PATH to the coreboot tree root
- --no-summary suppress the per-file summary
- --mailback only produce a report in case of warnings/errors
- --summary-file include the filename in summary
- --debug KEY=[0|1] turn on/off debugging of KEY, where KEY is one of
- 'values', 'possible', 'type', and 'attr' (default
- is all off)
- --test-only=WORD report only warnings/errors containing WORD
- literally
- --fix EXPERIMENTAL - may create horrible results
- If correctable single-line errors exist, create
- "<inputfile>.EXPERIMENTAL-checkpatch-fixes"
- with potential errors corrected to the preferred
- checkpatch style
- --fix-inplace EXPERIMENTAL - may create horrible results
- Is the same as --fix, but overwrites the input
- file. It's your fault if there's no backup or git
- --ignore-perl-version override checking of perl version. expect
- runtime errors.
- -h, --help, --version display this help and exit
-
-When FILE is - read standard input.
-EOM
-
- exit($exitcode);
-}
-
-my $conf = which_conf($configuration_file);
-if (-f $conf) {
- my @conf_args;
- open(my $conffile, '<', "$conf")
- or warn "$P: Can't find a readable $configuration_file file $!\n";
-
- while (<$conffile>) {
- my $line = $_;
-
- $line =~ s/\s*\n?$//g;
- $line =~ s/^\s*//g;
- $line =~ s/\s+/ /g;
-
- next if ($line =~ m/^\s*#/);
- next if ($line =~ m/^\s*$/);
-
- my @words = split(" ", $line);
- foreach my $word (@words) {
- last if ($word =~ m/^#/);
- push (@conf_args, $word);
- }
- }
- close($conffile);
- unshift(@ARGV, @conf_args) if @conf_args;
-}
-
-GetOptions(
- 'q|quiet+' => \$quiet,
- 'tree!' => \$tree,
- 'signoff!' => \$chk_signoff,
- 'patch!' => \$chk_patch,
- 'emacs!' => \$emacs,
- 'terse!' => \$terse,
- 'f|file!' => \$file,
- 'subjective!' => \$check,
- 'strict!' => \$check,
- 'ignore=s' => \@ignore,
- 'types=s' => \@use,
- 'show-types!' => \$show_types,
- 'max-line-length=i' => \$max_line_length,
- 'min-conf-desc-length=i' => \$min_conf_desc_length,
- 'root=s' => \$root,
- 'summary!' => \$summary,
- 'mailback!' => \$mailback,
- 'summary-file!' => \$summary_file,
- 'fix!' => \$fix,
- 'fix-inplace!' => \$fix_inplace,
- 'ignore-perl-version!' => \$ignore_perl_version,
- 'debug=s' => \%debug,
- 'test-only=s' => \$tst_only,
- 'h|help' => \$help,
- 'version' => \$help
-) or help(1);
-
-help(0) if ($help);
-
-$fix = 1 if ($fix_inplace);
-$check_orig = $check;
-
-my $exit = 0;
-
-if ($^V && $^V lt $minimum_perl_version) {
- printf "$P: requires at least perl version %vd\n", $minimum_perl_version;
- if (!$ignore_perl_version) {
- exit(1);
- }
-}
-
-if ($#ARGV < 0) {
- print "$P: no input files\n";
- exit(1);
-}
-
-sub hash_save_array_words {
- my ($hashRef, $arrayRef) = @_;
-
- my @array = split(/,/, join(',', @$arrayRef));
- foreach my $word (@array) {
- $word =~ s/\s*\n?$//g;
- $word =~ s/^\s*//g;
- $word =~ s/\s+/ /g;
- $word =~ tr/[a-z]/[A-Z]/;
-
- next if ($word =~ m/^\s*#/);
- next if ($word =~ m/^\s*$/);
-
- $hashRef->{$word}++;
- }
-}
-
-sub hash_show_words {
- my ($hashRef, $prefix) = @_;
-
- if ($quiet == 0 && keys %$hashRef) {
- print "NOTE: $prefix message types:";
- foreach my $word (sort keys %$hashRef) {
- print " $word";
- }
- print "\n\n";
- }
-}
-
-hash_save_array_words(\%ignore_type, \@ignore);
-hash_save_array_words(\%use_type, \@use);
-
-my $dbg_values = 0;
-my $dbg_possible = 0;
-my $dbg_type = 0;
-my $dbg_attr = 0;
-for my $key (keys %debug) {
- ## no critic
- eval "\${dbg_$key} = '$debug{$key}';";
- die "$@" if ($@);
-}
-
-my $rpt_cleaners = 0;
-
-if ($terse) {
- $emacs = 1;
- $quiet++;
-}
-
-if ($tree) {
- if (defined $root) {
- if (!top_of_kernel_tree($root)) {
- die "$P: $root: --root does not point at a valid tree\n";
- }
- } else {
- if (top_of_kernel_tree('.')) {
- $root = '.';
- } elsif ($0 =~ m@(.*)/util/lint/[^/]*$@ &&
- top_of_kernel_tree($1)) {
- $root = $1;
- }
- }
-
- if (!defined $root) {
- print "Must be run from the top-level dir. of a coreboot tree\n";
- exit(2);
- }
-}
-
-my $emitted_corrupt = 0;
-
-our $Ident = qr{
- [A-Za-z_][A-Za-z\d_]*
- (?:\s*\#\#\s*[A-Za-z_][A-Za-z\d_]*)*
- }x;
-our $Storage = qr{extern|static|asmlinkage};
-our $Sparse = qr{
- __user|
- __kernel|
- __force|
- __iomem|
- __must_check|
- __init_refok|
- __kprobes|
- __ref|
- __rcu
- }x;
-our $InitAttributePrefix = qr{__(?:mem|cpu|dev|net_|)};
-our $InitAttributeData = qr{$InitAttributePrefix(?:initdata\b)};
-our $InitAttributeConst = qr{$InitAttributePrefix(?:initconst\b)};
-our $InitAttributeInit = qr{$InitAttributePrefix(?:init\b)};
-our $InitAttribute = qr{$InitAttributeData|$InitAttributeConst|$InitAttributeInit};
-
-# Notes to $Attribute:
-# We need \b after 'init' otherwise 'initconst' will cause a false positive in a check
-our $Attribute = qr{
- const|
- __percpu|
- __nocast|
- __safe|
- __bitwise__|
- __packed__|
- __packed2__|
- __naked|
- __maybe_unused|
- __always_unused|
- __noreturn|
- __used|
- __cold|
- __noclone|
- __deprecated|
- __read_mostly|
- __kprobes|
- $InitAttribute|
- ____cacheline_aligned|
- ____cacheline_aligned_in_smp|
- ____cacheline_internodealigned_in_smp|
- __weak
- }x;
-our $Modifier;
-our $Inline = qr{inline|__always_inline|noinline|__inline|__inline__};
-our $Member = qr{->$Ident|\.$Ident|\[[^]]*\]};
-our $Lval = qr{$Ident(?:$Member)*};
-
-our $Int_type = qr{(?i)llu|ull|ll|lu|ul|l|u};
-our $Binary = qr{(?i)0b[01]+$Int_type?};
-our $Hex = qr{(?i)0x[0-9a-f]+$Int_type?};
-our $Int = qr{[0-9]+$Int_type?};
-our $Octal = qr{0[0-7]+$Int_type?};
-our $Float_hex = qr{(?i)0x[0-9a-f]+p-?[0-9]+[fl]?};
-our $Float_dec = qr{(?i)(?:[0-9]+\.[0-9]*|[0-9]*\.[0-9]+)(?:e-?[0-9]+)?[fl]?};
-our $Float_int = qr{(?i)[0-9]+e-?[0-9]+[fl]?};
-our $Float = qr{$Float_hex|$Float_dec|$Float_int};
-our $Constant = qr{$Float|$Binary|$Octal|$Hex|$Int};
-our $Assignment = qr{\*\=|/=|%=|\+=|-=|<<=|>>=|&=|\^=|\|=|=};
-our $Compare = qr{<=|>=|==|!=|<|(?<!-)>};
-our $Arithmetic = qr{\+|-|\*|\/|%};
-our $Operators = qr{
- <=|>=|==|!=|
- =>|->|<<|>>|<|>|!|~|
- &&|\|\||,|\^|\+\+|--|&|\||$Arithmetic
- }x;
-
-our $c90_Keywords = qr{do|for|while|if|else|return|goto|continue|switch|default|case|break}x;
-
-our $NonptrType;
-our $NonptrTypeMisordered;
-our $NonptrTypeWithAttr;
-our $Type;
-our $TypeMisordered;
-our $Declare;
-our $DeclareMisordered;
-
-our $NON_ASCII_UTF8 = qr{
- [\xC2-\xDF][\x80-\xBF] # non-overlong 2-byte
- | \xE0[\xA0-\xBF][\x80-\xBF] # excluding overlongs
- | [\xE1-\xEC\xEE\xEF][\x80-\xBF]{2} # straight 3-byte
- | \xED[\x80-\x9F][\x80-\xBF] # excluding surrogates
- | \xF0[\x90-\xBF][\x80-\xBF]{2} # planes 1-3
- | [\xF1-\xF3][\x80-\xBF]{3} # planes 4-15
- | \xF4[\x80-\x8F][\x80-\xBF]{2} # plane 16
-}x;
-
-our $UTF8 = qr{
- [\x09\x0A\x0D\x20-\x7E] # ASCII
- | $NON_ASCII_UTF8
-}x;
-
-our $typeTypedefs = qr{(?x:
- (?:__)?(?:u|s|be|le)(?:8|16|32|64)|
- atomic_t
-)};
-
-our $logFunctions = qr{(?x:
- printk(?:_ratelimited|_once|)|
- (?:[a-z0-9]+_){1,2}(?:printk|emerg|alert|crit|err|warning|warn|notice|info|debug|dbg|vdbg|devel|cont|WARN)(?:_ratelimited|_once|)|
- WARN(?:_RATELIMIT|_ONCE|)|
- panic|
- MODULE_[A-Z_]+|
- seq_vprintf|seq_printf|seq_puts
-)};
-
-our $signature_tags = qr{(?xi:
- Signed-off-by:|
- Acked-by:|
- Tested-by:|
- Reviewed-by:|
- Reported-by:|
- Suggested-by:|
- To:|
- Cc:
-)};
-
-our @typeListMisordered = (
- qr{char\s+(?:un)?signed},
- qr{int\s+(?:(?:un)?signed\s+)?short\s},
- qr{int\s+short(?:\s+(?:un)?signed)},
- qr{short\s+int(?:\s+(?:un)?signed)},
- qr{(?:un)?signed\s+int\s+short},
- qr{short\s+(?:un)?signed},
- qr{long\s+int\s+(?:un)?signed},
- qr{int\s+long\s+(?:un)?signed},
- qr{long\s+(?:un)?signed\s+int},
- qr{int\s+(?:un)?signed\s+long},
- qr{int\s+(?:un)?signed},
- qr{int\s+long\s+long\s+(?:un)?signed},
- qr{long\s+long\s+int\s+(?:un)?signed},
- qr{long\s+long\s+(?:un)?signed\s+int},
- qr{long\s+long\s+(?:un)?signed},
- qr{long\s+(?:un)?signed},
-);
-
-our @typeList = (
- qr{void},
- qr{(?:(?:un)?signed\s+)?char},
- qr{(?:(?:un)?signed\s+)?short\s+int},
- qr{(?:(?:un)?signed\s+)?short},
- qr{(?:(?:un)?signed\s+)?int},
- qr{(?:(?:un)?signed\s+)?long\s+int},
- qr{(?:(?:un)?signed\s+)?long\s+long\s+int},
- qr{(?:(?:un)?signed\s+)?long\s+long},
- qr{(?:(?:un)?signed\s+)?long},
- qr{(?:un)?signed},
- qr{float},
- qr{double},
- qr{bool},
- qr{struct\s+$Ident},
- qr{union\s+$Ident},
- qr{enum\s+$Ident},
- qr{${Ident}_t},
- qr{${Ident}_handler},
- qr{${Ident}_handler_fn},
- @typeListMisordered,
-);
-our @typeListWithAttr = (
- @typeList,
- qr{struct\s+$InitAttribute\s+$Ident},
- qr{union\s+$InitAttribute\s+$Ident},
-);
-
-our @modifierList = (
- qr{fastcall},
-);
-
-our @mode_permission_funcs = (
- ["module_param", 3],
- ["module_param_(?:array|named|string)", 4],
- ["module_param_array_named", 5],
- ["debugfs_create_(?:file|u8|u16|u32|u64|x8|x16|x32|x64|size_t|atomic_t|bool|blob|regset32|u32_array)", 2],
- ["proc_create(?:_data|)", 2],
- ["(?:CLASS|DEVICE|SENSOR)_ATTR", 2],
-);
-
-#Create a search pattern for all these functions to speed up a loop below
-our $mode_perms_search = "";
-foreach my $entry (@mode_permission_funcs) {
- $mode_perms_search .= '|' if ($mode_perms_search ne "");
- $mode_perms_search .= $entry->[0];
-}
-
-our $allowed_asm_includes = qr{(?x:
- irq|
- memory|
- time|
- reboot
-)};
-# memory.h: ARM has a custom one
-
-# Load common spelling mistakes and build regular expression list.
-my $misspellings;
-my %spelling_fix;
-
-if (open(my $spelling, '<', $spelling_file)) {
- my @spelling_list;
- while (<$spelling>) {
- my $line = $_;
-
- $line =~ s/\s*\n?$//g;
- $line =~ s/^\s*//g;
-
- next if ($line =~ m/^\s*#/);
- next if ($line =~ m/^\s*$/);
-
- my ($suspect, $fix) = split(/\|\|/, $line);
-
- push(@spelling_list, $suspect);
- $spelling_fix{$suspect} = $fix;
- }
- close($spelling);
- $misspellings = join("|", @spelling_list);
-} else {
- warn "No typos will be found - file '$spelling_file': $!\n";
-}
-
-sub build_types {
- my $mods = "(?x: \n" . join("|\n ", @modifierList) . "\n)";
- my $all = "(?x: \n" . join("|\n ", @typeList) . "\n)";
- my $Misordered = "(?x: \n" . join("|\n ", @typeListMisordered) . "\n)";
- my $allWithAttr = "(?x: \n" . join("|\n ", @typeListWithAttr) . "\n)";
- $Modifier = qr{(?:$Attribute|$Sparse|$mods)};
- $NonptrType = qr{
- (?:$Modifier\s+|const\s+)*
- (?:
- (?:typeof|__typeof__)\s*\([^\)]*\)|
- (?:$typeTypedefs\b)|
- (?:${all}\b)
- )
- (?:\s+$Modifier|\s+const)*
- }x;
- $NonptrTypeMisordered = qr{
- (?:$Modifier\s+|const\s+)*
- (?:
- (?:${Misordered}\b)
- )
- (?:\s+$Modifier|\s+const)*
- }x;
- $NonptrTypeWithAttr = qr{
- (?:$Modifier\s+|const\s+)*
- (?:
- (?:typeof|__typeof__)\s*\([^\)]*\)|
- (?:$typeTypedefs\b)|
- (?:${allWithAttr}\b)
- )
- (?:\s+$Modifier|\s+const)*
- }x;
- $Type = qr{
- $NonptrType
- (?:(?:\s|\*|\[\])+\s*const|(?:\s|\*\s*(?:const\s*)?|\[\])+|(?:\s*\[\s*\])+)?
- (?:\s+$Inline|\s+$Modifier)*
- }x;
- $TypeMisordered = qr{
- $NonptrTypeMisordered
- (?:(?:\s|\*|\[\])+\s*const|(?:\s|\*\s*(?:const\s*)?|\[\])+|(?:\s*\[\s*\])+)?
- (?:\s+$Inline|\s+$Modifier)*
- }x;
- $Declare = qr{(?:$Storage\s+(?:$Inline\s+)?)?$Type};
- $DeclareMisordered = qr{(?:$Storage\s+(?:$Inline\s+)?)?$TypeMisordered};
-}
-build_types();
-
-our $Typecast = qr{\s*(\(\s*$NonptrType\s*\)){0,1}\s*};
-
-# Using $balanced_parens, $LvalOrFunc, or $FuncArg
-# requires at least perl version v5.10.0
-# Any use must be runtime checked with $^V
-
-our $balanced_parens = qr/(\((?:[^\(\)]++|(?-1))*\))/;
-our $LvalOrFunc = qr{((?:[\&\*]\s*)?$Lval)\s*($balanced_parens{0,1})\s*};
-our $FuncArg = qr{$Typecast{0,1}($LvalOrFunc|$Constant)};
-
-our $declaration_macros = qr{(?x:
- (?:$Storage\s+)?(?:[A-Z_][A-Z0-9]*_){0,2}(?:DEFINE|DECLARE)(?:_[A-Z0-9]+){1,2}\s*\(|
- (?:$Storage\s+)?LIST_HEAD\s*\(|
- (?:$Storage\s+)?${Type}\s+uninitialized_var\s*\(
-)};
-
-sub deparenthesize {
- my ($string) = @_;
- return "" if (!defined($string));
-
- while ($string =~ /^\s*\(.*\)\s*$/) {
- $string =~ s@^\s*\(\s*@@;
- $string =~ s@\s*\)\s*$@@;
- }
-
- $string =~ s@\s+@ @g;
-
- return $string;
-}
-
-sub seed_camelcase_file {
- my ($file) = @_;
-
- return if (!(-f $file));
-
- local $/;
-
- open(my $include_file, '<', "$file")
- or warn "$P: Can't read '$file' $!\n";
- my $text = <$include_file>;
- close($include_file);
-
- my @lines = split('\n', $text);
-
- foreach my $line (@lines) {
- next if ($line !~ /(?:[A-Z][a-z]|[a-z][A-Z])/);
- if ($line =~ /^[ \t]*(?:#[ \t]*define|typedef\s+$Type)\s+(\w*(?:[A-Z][a-z]|[a-z][A-Z])\w*)/) {
- $camelcase{$1} = 1;
- } elsif ($line =~ /^\s*$Declare\s+(\w*(?:[A-Z][a-z]|[a-z][A-Z])\w*)\s*[\(\[,;]/) {
- $camelcase{$1} = 1;
- } elsif ($line =~ /^\s*(?:union|struct|enum)\s+(\w*(?:[A-Z][a-z]|[a-z][A-Z])\w*)\s*[;\{]/) {
- $camelcase{$1} = 1;
- }
- }
-}
-
-my $camelcase_seeded = 0;
-sub seed_camelcase_includes {
- return if ($camelcase_seeded);
-
- my $files;
- my $camelcase_cache = "";
- my @include_files = ();
-
- $camelcase_seeded = 1;
-
- if (-e ".git") {
- my $git_last_include_commit = `git log --no-merges --pretty=format:"%h%n" -1 -- include`;
- chomp $git_last_include_commit;
- $camelcase_cache = ".checkpatch-camelcase.git.$git_last_include_commit";
- } else {
- my $last_mod_date = 0;
- $files = `find $root/include -name "*.h"`;
- @include_files = split('\n', $files);
- foreach my $file (@include_files) {
- my $date = POSIX::strftime("%Y%m%d%H%M",
- localtime((stat $file)[9]));
- $last_mod_date = $date if ($last_mod_date < $date);
- }
- $camelcase_cache = ".checkpatch-camelcase.date.$last_mod_date";
- }
-
- if ($camelcase_cache ne "" && -f $camelcase_cache) {
- open(my $camelcase_file, '<', "$camelcase_cache")
- or warn "$P: Can't read '$camelcase_cache' $!\n";
- while (<$camelcase_file>) {
- chomp;
- $camelcase{$_} = 1;
- }
- close($camelcase_file);
-
- return;
- }
-
- if (-e ".git") {
- $files = `git ls-files "include/*.h"`;
- @include_files = split('\n', $files);
- }
-
- foreach my $file (@include_files) {
- seed_camelcase_file($file);
- }
-
- if ($camelcase_cache ne "") {
- unlink glob ".checkpatch-camelcase.*";
- open(my $camelcase_file, '>', "$camelcase_cache")
- or warn "$P: Can't write '$camelcase_cache' $!\n";
- foreach (sort { lc($a) cmp lc($b) } keys(%camelcase)) {
- print $camelcase_file ("$_\n");
- }
- close($camelcase_file);
- }
-}
-
-sub git_commit_info {
- my ($commit, $id, $desc) = @_;
-
- return ($id, $desc) if ((which("git") eq "") || !(-e ".git"));
-
- my $output = `git log --no-color --format='%H %s' -1 $commit 2>&1`;
- $output =~ s/^\s*//gm;
- my @lines = split("\n", $output);
-
- if ($lines[0] =~ /^error: short SHA1 $commit is ambiguous\./) {
-# Maybe one day convert this block of bash into something that returns
-# all matching commit ids, but it's very slow...
-#
-# echo "checking commits $1..."
-# git rev-list --remotes | grep -i "^$1" |
-# while read line ; do
-# git log --format='%H %s' -1 $line |
-# echo "commit $(cut -c 1-12,41-)"
-# done
- } elsif ($lines[0] =~ /^fatal: ambiguous argument '$commit': unknown revision or path not in the working tree\./) {
- } else {
- $id = substr($lines[0], 0, 12);
- $desc = substr($lines[0], 41);
- }
-
- return ($id, $desc);
-}
-
-$chk_signoff = 0 if ($file);
-
-my @rawlines = ();
-my @lines = ();
-my @fixed = ();
-my @fixed_inserted = ();
-my @fixed_deleted = ();
-my $fixlinenr = -1;
-
-my $vname;
-for my $filename (@ARGV) {
- my $FILE;
- if ($file) {
- open($FILE, '-|', "diff -u /dev/null $filename") ||
- die "$P: $filename: diff failed - $!\n";
- } elsif ($filename eq '-') {
- open($FILE, '<&STDIN');
- } else {
- open($FILE, '<', "$filename") ||
- die "$P: $filename: open failed - $!\n";
- }
- if ($filename eq '-') {
- $vname = 'Your patch';
- } else {
- $vname = $filename;
- }
- while (<$FILE>) {
- chomp;
- push(@rawlines, $_);
- }
- close($FILE);
- if (!process($filename)) {
- $exit = 1;
- }
- @rawlines = ();
- @lines = ();
- @fixed = ();
- @fixed_inserted = ();
- @fixed_deleted = ();
- $fixlinenr = -1;
-}
-
-exit($exit);
-
-sub top_of_kernel_tree {
- my ($root) = @_;
-
- my @tree_check = (
- "COPYING", "README", "Makefile", "Makefile.inc",
- "src", "Documentation", "util", "payloads",
- );
-
- foreach my $check (@tree_check) {
- if (! -e $root . '/' . $check) {
- return 0;
- }
- }
- return 1;
-}
-
-sub parse_email {
- my ($formatted_email) = @_;
-
- my $name = "";
- my $address = "";
- my $comment = "";
-
- if ($formatted_email =~ /^(.*)<(\S+\@\S+)>(.*)$/) {
- $name = $1;
- $address = $2;
- $comment = $3 if defined $3;
- } elsif ($formatted_email =~ /^\s*<(\S+\@\S+)>(.*)$/) {
- $address = $1;
- $comment = $2 if defined $2;
- } elsif ($formatted_email =~ /(\S+\@\S+)(.*)$/) {
- $address = $1;
- $comment = $2 if defined $2;
- $formatted_email =~ s/$address.*$//;
- $name = $formatted_email;
- $name = trim($name);
- $name =~ s/^\"|\"$//g;
- # If there's a name left after stripping spaces and
- # leading quotes, and the address doesn't have both
- # leading and trailing angle brackets, the address
- # is invalid. ie:
- # "joe smith joe at smith.com" bad
- # "joe smith <joe at smith.com" bad
- if ($name ne "" && $address !~ /^<[^>]+>$/) {
- $name = "";
- $address = "";
- $comment = "";
- }
- }
-
- $name = trim($name);
- $name =~ s/^\"|\"$//g;
- $address = trim($address);
- $address =~ s/^\<|\>$//g;
-
- if ($name =~ /[^\w \-]/i) { ##has "must quote" chars
- $name =~ s/(?<!\\)"/\\"/g; ##escape quotes
- $name = "\"$name\"";
- }
-
- return ($name, $address, $comment);
-}
-
-sub format_email {
- my ($name, $address) = @_;
-
- my $formatted_email;
-
- $name = trim($name);
- $name =~ s/^\"|\"$//g;
- $address = trim($address);
-
- if ($name =~ /[^\w \-]/i) { ##has "must quote" chars
- $name =~ s/(?<!\\)"/\\"/g; ##escape quotes
- $name = "\"$name\"";
- }
-
- if ("$name" eq "") {
- $formatted_email = "$address";
- } else {
- $formatted_email = "$name <$address>";
- }
-
- return $formatted_email;
-}
-
-sub which {
- my ($bin) = @_;
-
- foreach my $path (split(/:/, $ENV{PATH})) {
- if (-e "$path/$bin") {
- return "$path/$bin";
- }
- }
-
- return "";
-}
-
-sub which_conf {
- my ($conf) = @_;
-
- foreach my $path (split(/:/, ".:$ENV{HOME}:.scripts")) {
- if (-e "$path/$conf") {
- return "$path/$conf";
- }
- }
-
- return "";
-}
-
-sub expand_tabs {
- my ($str) = @_;
-
- my $res = '';
- my $n = 0;
- for my $c (split(//, $str)) {
- if ($c eq "\t") {
- $res .= ' ';
- $n++;
- for (; ($n % 8) != 0; $n++) {
- $res .= ' ';
- }
- next;
- }
- $res .= $c;
- $n++;
- }
-
- return $res;
-}
-sub copy_spacing {
- (my $res = shift) =~ tr/\t/ /c;
- return $res;
-}
-
-sub line_stats {
- my ($line) = @_;
-
- # Drop the diff line leader and expand tabs
- $line =~ s/^.//;
- $line = expand_tabs($line);
-
- # Pick the indent from the front of the line.
- my ($white) = ($line =~ /^(\s*)/);
-
- return (length($line), length($white));
-}
-
-my $sanitise_quote = '';
-
-sub sanitise_line_reset {
- my ($in_comment) = @_;
-
- if ($in_comment) {
- $sanitise_quote = '*/';
- } else {
- $sanitise_quote = '';
- }
-}
-sub sanitise_line {
- my ($line) = @_;
-
- my $res = '';
- my $l = '';
-
- my $qlen = 0;
- my $off = 0;
- my $c;
-
- # Always copy over the diff marker.
- $res = substr($line, 0, 1);
-
- for ($off = 1; $off < length($line); $off++) {
- $c = substr($line, $off, 1);
-
- # Comments we are wacking completly including the begin
- # and end, all to $;.
- if ($sanitise_quote eq '' && substr($line, $off, 2) eq '/*') {
- $sanitise_quote = '*/';
-
- substr($res, $off, 2, "$;$;");
- $off++;
- next;
- }
- if ($sanitise_quote eq '*/' && substr($line, $off, 2) eq '*/') {
- $sanitise_quote = '';
- substr($res, $off, 2, "$;$;");
- $off++;
- next;
- }
- if ($sanitise_quote eq '' && substr($line, $off, 2) eq '//') {
- $sanitise_quote = '//';
-
- substr($res, $off, 2, $sanitise_quote);
- $off++;
- next;
- }
-
- # A \ in a string means ignore the next character.
- if (($sanitise_quote eq "'" || $sanitise_quote eq '"') &&
- $c eq "\\") {
- substr($res, $off, 2, 'XX');
- $off++;
- next;
- }
- # Regular quotes.
- if ($c eq "'" || $c eq '"') {
- if ($sanitise_quote eq '') {
- $sanitise_quote = $c;
-
- substr($res, $off, 1, $c);
- next;
- } elsif ($sanitise_quote eq $c) {
- $sanitise_quote = '';
- }
- }
-
- #print "c<$c> SQ<$sanitise_quote>\n";
- if ($off != 0 && $sanitise_quote eq '*/' && $c ne "\t") {
- substr($res, $off, 1, $;);
- } elsif ($off != 0 && $sanitise_quote eq '//' && $c ne "\t") {
- substr($res, $off, 1, $;);
- } elsif ($off != 0 && $sanitise_quote && $c ne "\t") {
- substr($res, $off, 1, 'X');
- } else {
- substr($res, $off, 1, $c);
- }
- }
-
- if ($sanitise_quote eq '//') {
- $sanitise_quote = '';
- }
-
- # The pathname on a #include may be surrounded by '<' and '>'.
- if ($res =~ /^.\s*\#\s*include\s+\<(.*)\>/) {
- my $clean = 'X' x length($1);
- $res =~ s@\<.*\>@<$clean>@;
-
- # The whole of a #error is a string.
- } elsif ($res =~ /^.\s*\#\s*(?:error|warning)\s+(.*)\b/) {
- my $clean = 'X' x length($1);
- $res =~ s@(\#\s*(?:error|warning)\s+).*@$1$clean@;
- }
-
- return $res;
-}
-
-sub get_quoted_string {
- my ($line, $rawline) = @_;
-
- return "" if ($line !~ m/(\"[X\t]+\")/g);
- return substr($rawline, $-[0], $+[0] - $-[0]);
-}
-
-sub ctx_statement_block {
- my ($linenr, $remain, $off) = @_;
- my $line = $linenr - 1;
- my $blk = '';
- my $soff = $off;
- my $coff = $off - 1;
- my $coff_set = 0;
-
- my $loff = 0;
-
- my $type = '';
- my $level = 0;
- my @stack = ();
- my $p;
- my $c;
- my $len = 0;
-
- my $remainder;
- while (1) {
- @stack = (['', 0]) if ($#stack == -1);
-
- #warn "CSB: blk<$blk> remain<$remain>\n";
- # If we are about to drop off the end, pull in more
- # context.
- if ($off >= $len) {
- for (; $remain > 0; $line++) {
- last if (!defined $lines[$line]);
- next if ($lines[$line] =~ /^-/);
- $remain--;
- $loff = $len;
- $blk .= $lines[$line] . "\n";
- $len = length($blk);
- $line++;
- last;
- }
- # Bail if there is no further context.
- #warn "CSB: blk<$blk> off<$off> len<$len>\n";
- if ($off >= $len) {
- last;
- }
- if ($level == 0 && substr($blk, $off) =~ /^.\s*#\s*define/) {
- $level++;
- $type = '#';
- }
- }
- $p = $c;
- $c = substr($blk, $off, 1);
- $remainder = substr($blk, $off);
-
- #warn "CSB: c<$c> type<$type> level<$level> remainder<$remainder> coff_set<$coff_set>\n";
-
- # Handle nested #if/#else.
- if ($remainder =~ /^#\s*(?:ifndef|ifdef|if)\s/) {
- push(@stack, [ $type, $level ]);
- } elsif ($remainder =~ /^#\s*(?:else|elif)\b/) {
- ($type, $level) = @{$stack[$#stack - 1]};
- } elsif ($remainder =~ /^#\s*endif\b/) {
- ($type, $level) = @{pop(@stack)};
- }
-
- # Statement ends at the ';' or a close '}' at the
- # outermost level.
- if ($level == 0 && $c eq ';') {
- last;
- }
-
- # An else is really a conditional as long as its not else if
- if ($level == 0 && $coff_set == 0 &&
- (!defined($p) || $p =~ /(?:\s|\}|\+)/) &&
- $remainder =~ /^(else)(?:\s|{)/ &&
- $remainder !~ /^else\s+if\b/) {
- $coff = $off + length($1) - 1;
- $coff_set = 1;
- #warn "CSB: mark coff<$coff> soff<$soff> 1<$1>\n";
- #warn "[" . substr($blk, $soff, $coff - $soff + 1) . "]\n";
- }
-
- if (($type eq '' || $type eq '(') && $c eq '(') {
- $level++;
- $type = '(';
- }
- if ($type eq '(' && $c eq ')') {
- $level--;
- $type = ($level != 0)? '(' : '';
-
- if ($level == 0 && $coff < $soff) {
- $coff = $off;
- $coff_set = 1;
- #warn "CSB: mark coff<$coff>\n";
- }
- }
- if (($type eq '' || $type eq '{') && $c eq '{') {
- $level++;
- $type = '{';
- }
- if ($type eq '{' && $c eq '}') {
- $level--;
- $type = ($level != 0)? '{' : '';
-
- if ($level == 0) {
- if (substr($blk, $off + 1, 1) eq ';') {
- $off++;
- }
- last;
- }
- }
- # Preprocessor commands end at the newline unless escaped.
- if ($type eq '#' && $c eq "\n" && $p ne "\\") {
- $level--;
- $type = '';
- $off++;
- last;
- }
- $off++;
- }
- # We are truly at the end, so shuffle to the next line.
- if ($off == $len) {
- $loff = $len + 1;
- $line++;
- $remain--;
- }
-
- my $statement = substr($blk, $soff, $off - $soff + 1);
- my $condition = substr($blk, $soff, $coff - $soff + 1);
-
- #warn "STATEMENT<$statement>\n";
- #warn "CONDITION<$condition>\n";
-
- #print "coff<$coff> soff<$off> loff<$loff>\n";
-
- return ($statement, $condition,
- $line, $remain + 1, $off - $loff + 1, $level);
-}
-
-sub statement_lines {
- my ($stmt) = @_;
-
- # Strip the diff line prefixes and rip blank lines at start and end.
- $stmt =~ s/(^|\n)./$1/g;
- $stmt =~ s/^\s*//;
- $stmt =~ s/\s*$//;
-
- my @stmt_lines = ($stmt =~ /\n/g);
-
- return $#stmt_lines + 2;
-}
-
-sub statement_rawlines {
- my ($stmt) = @_;
-
- my @stmt_lines = ($stmt =~ /\n/g);
-
- return $#stmt_lines + 2;
-}
-
-sub statement_block_size {
- my ($stmt) = @_;
-
- $stmt =~ s/(^|\n)./$1/g;
- $stmt =~ s/^\s*{//;
- $stmt =~ s/}\s*$//;
- $stmt =~ s/^\s*//;
- $stmt =~ s/\s*$//;
-
- my @stmt_lines = ($stmt =~ /\n/g);
- my @stmt_statements = ($stmt =~ /;/g);
-
- my $stmt_lines = $#stmt_lines + 2;
- my $stmt_statements = $#stmt_statements + 1;
-
- if ($stmt_lines > $stmt_statements) {
- return $stmt_lines;
- } else {
- return $stmt_statements;
- }
-}
-
-sub ctx_statement_full {
- my ($linenr, $remain, $off) = @_;
- my ($statement, $condition, $level);
-
- my (@chunks);
-
- # Grab the first conditional/block pair.
- ($statement, $condition, $linenr, $remain, $off, $level) =
- ctx_statement_block($linenr, $remain, $off);
- #print "F: c<$condition> s<$statement> remain<$remain>\n";
- push(@chunks, [ $condition, $statement ]);
- if (!($remain > 0 && $condition =~ /^\s*(?:\n[+-])?\s*(?:if|else|do)\b/s)) {
- return ($level, $linenr, @chunks);
- }
-
- # Pull in the following conditional/block pairs and see if they
- # could continue the statement.
- for (;;) {
- ($statement, $condition, $linenr, $remain, $off, $level) =
- ctx_statement_block($linenr, $remain, $off);
- #print "C: c<$condition> s<$statement> remain<$remain>\n";
- last if (!($remain > 0 && $condition =~ /^(?:\s*\n[+-])*\s*(?:else|do)\b/s));
- #print "C: push\n";
- push(@chunks, [ $condition, $statement ]);
- }
-
- return ($level, $linenr, @chunks);
-}
-
-sub ctx_block_get {
- my ($linenr, $remain, $outer, $open, $close, $off) = @_;
- my $line;
- my $start = $linenr - 1;
- my $blk = '';
- my @o;
- my @c;
- my @res = ();
-
- my $level = 0;
- my @stack = ($level);
- for ($line = $start; $remain > 0; $line++) {
- next if ($rawlines[$line] =~ /^-/);
- $remain--;
-
- $blk .= $rawlines[$line];
-
- # Handle nested #if/#else.
- if ($lines[$line] =~ /^.\s*#\s*(?:ifndef|ifdef|if)\s/) {
- push(@stack, $level);
- } elsif ($lines[$line] =~ /^.\s*#\s*(?:else|elif)\b/) {
- $level = $stack[$#stack - 1];
- } elsif ($lines[$line] =~ /^.\s*#\s*endif\b/) {
- $level = pop(@stack);
- }
-
- foreach my $c (split(//, $lines[$line])) {
- ##print "C<$c>L<$level><$open$close>O<$off>\n";
- if ($off > 0) {
- $off--;
- next;
- }
-
- if ($c eq $close && $level > 0) {
- $level--;
- last if ($level == 0);
- } elsif ($c eq $open) {
- $level++;
- }
- }
-
- if (!$outer || $level <= 1) {
- push(@res, $rawlines[$line]);
- }
-
- last if ($level == 0);
- }
-
- return ($level, @res);
-}
-sub ctx_block_outer {
- my ($linenr, $remain) = @_;
-
- my ($level, @r) = ctx_block_get($linenr, $remain, 1, '{', '}', 0);
- return @r;
-}
-sub ctx_block {
- my ($linenr, $remain) = @_;
-
- my ($level, @r) = ctx_block_get($linenr, $remain, 0, '{', '}', 0);
- return @r;
-}
-sub ctx_statement {
- my ($linenr, $remain, $off) = @_;
-
- my ($level, @r) = ctx_block_get($linenr, $remain, 0, '(', ')', $off);
- return @r;
-}
-sub ctx_block_level {
- my ($linenr, $remain) = @_;
-
- return ctx_block_get($linenr, $remain, 0, '{', '}', 0);
-}
-sub ctx_statement_level {
- my ($linenr, $remain, $off) = @_;
-
- return ctx_block_get($linenr, $remain, 0, '(', ')', $off);
-}
-
-sub ctx_locate_comment {
- my ($first_line, $end_line) = @_;
-
- # Catch a comment on the end of the line itself.
- my ($current_comment) = ($rawlines[$end_line - 1] =~ m at .*(/\*.*\*/)\s*(?:\\\s*)?$@);
- return $current_comment if (defined $current_comment);
-
- # Look through the context and try and figure out if there is a
- # comment.
- my $in_comment = 0;
- $current_comment = '';
- for (my $linenr = $first_line; $linenr < $end_line; $linenr++) {
- my $line = $rawlines[$linenr - 1];
- #warn " $line\n";
- if ($linenr == $first_line and $line =~ m@^.\s*\*@) {
- $in_comment = 1;
- }
- if ($line =~ m@/\*@) {
- $in_comment = 1;
- }
- if (!$in_comment && $current_comment ne '') {
- $current_comment = '';
- }
- $current_comment .= $line . "\n" if ($in_comment);
- if ($line =~ m@\*/@) {
- $in_comment = 0;
- }
- }
-
- chomp($current_comment);
- return($current_comment);
-}
-sub ctx_has_comment {
- my ($first_line, $end_line) = @_;
- my $cmt = ctx_locate_comment($first_line, $end_line);
-
- ##print "LINE: $rawlines[$end_line - 1 ]\n";
- ##print "CMMT: $cmt\n";
-
- return ($cmt ne '');
-}
-
-sub raw_line {
- my ($linenr, $cnt) = @_;
-
- my $offset = $linenr - 1;
- $cnt++;
-
- my $line;
- while ($cnt) {
- $line = $rawlines[$offset++];
- next if (defined($line) && $line =~ /^-/);
- $cnt--;
- }
-
- return $line;
-}
-
-sub cat_vet {
- my ($vet) = @_;
- my ($res, $coded);
-
- $res = '';
- while ($vet =~ /([^[:cntrl:]]*)([[:cntrl:]]|$)/g) {
- $res .= $1;
- if ($2 ne '') {
- $coded = sprintf("^%c", unpack('C', $2) + 64);
- $res .= $coded;
- }
- }
- $res =~ s/$/\$/;
-
- return $res;
-}
-
-my $av_preprocessor = 0;
-my $av_pending;
-my @av_paren_type;
-my $av_pend_colon;
-
-sub annotate_reset {
- $av_preprocessor = 0;
- $av_pending = '_';
- @av_paren_type = ('E');
- $av_pend_colon = 'O';
-}
-
-sub annotate_values {
- my ($stream, $type) = @_;
-
- my $res;
- my $var = '_' x length($stream);
- my $cur = $stream;
-
- print "$stream\n" if ($dbg_values > 1);
-
- while (length($cur)) {
- @av_paren_type = ('E') if ($#av_paren_type < 0);
- print " <" . join('', @av_paren_type) .
- "> <$type> <$av_pending>" if ($dbg_values > 1);
- if ($cur =~ /^(\s+)/o) {
- print "WS($1)\n" if ($dbg_values > 1);
- if ($1 =~ /\n/ && $av_preprocessor) {
- $type = pop(@av_paren_type);
- $av_preprocessor = 0;
- }
-
- } elsif ($cur =~ /^(\(\s*$Type\s*)\)/ && $av_pending eq '_') {
- print "CAST($1)\n" if ($dbg_values > 1);
- push(@av_paren_type, $type);
- $type = 'c';
-
- } elsif ($cur =~ /^($Type)\s*(?:$Ident|,|\)|\(|\s*$)/) {
- print "DECLARE($1)\n" if ($dbg_values > 1);
- $type = 'T';
-
- } elsif ($cur =~ /^($Modifier)\s*/) {
- print "MODIFIER($1)\n" if ($dbg_values > 1);
- $type = 'T';
-
- } elsif ($cur =~ /^(\#\s*define\s*$Ident)(\(?)/o) {
- print "DEFINE($1,$2)\n" if ($dbg_values > 1);
- $av_preprocessor = 1;
- push(@av_paren_type, $type);
- if ($2 ne '') {
- $av_pending = 'N';
- }
- $type = 'E';
-
- } elsif ($cur =~ /^(\#\s*(?:undef\s*$Ident|include\b))/o) {
- print "UNDEF($1)\n" if ($dbg_values > 1);
- $av_preprocessor = 1;
- push(@av_paren_type, $type);
-
- } elsif ($cur =~ /^(\#\s*(?:ifdef|ifndef|if))/o) {
- print "PRE_START($1)\n" if ($dbg_values > 1);
- $av_preprocessor = 1;
-
- push(@av_paren_type, $type);
- push(@av_paren_type, $type);
- $type = 'E';
-
- } elsif ($cur =~ /^(\#\s*(?:else|elif))/o) {
- print "PRE_RESTART($1)\n" if ($dbg_values > 1);
- $av_preprocessor = 1;
-
- push(@av_paren_type, $av_paren_type[$#av_paren_type]);
-
- $type = 'E';
-
- } elsif ($cur =~ /^(\#\s*(?:endif))/o) {
- print "PRE_END($1)\n" if ($dbg_values > 1);
-
- $av_preprocessor = 1;
-
- # Assume all arms of the conditional end as this
- # one does, and continue as if the #endif was not here.
- pop(@av_paren_type);
- push(@av_paren_type, $type);
- $type = 'E';
-
- } elsif ($cur =~ /^(\\\n)/o) {
- print "PRECONT($1)\n" if ($dbg_values > 1);
-
- } elsif ($cur =~ /^(__attribute__)\s*\(?/o) {
- print "ATTR($1)\n" if ($dbg_values > 1);
- $av_pending = $type;
- $type = 'N';
-
- } elsif ($cur =~ /^(sizeof)\s*(\()?/o) {
- print "SIZEOF($1)\n" if ($dbg_values > 1);
- if (defined $2) {
- $av_pending = 'V';
- }
- $type = 'N';
-
- } elsif ($cur =~ /^(if|while|for)\b/o) {
- print "COND($1)\n" if ($dbg_values > 1);
- $av_pending = 'E';
- $type = 'N';
-
- } elsif ($cur =~/^(case)/o) {
- print "CASE($1)\n" if ($dbg_values > 1);
- $av_pend_colon = 'C';
- $type = 'N';
-
- } elsif ($cur =~/^(return|else|goto|typeof|__typeof__)\b/o) {
- print "KEYWORD($1)\n" if ($dbg_values > 1);
- $type = 'N';
-
- } elsif ($cur =~ /^(\()/o) {
- print "PAREN('$1')\n" if ($dbg_values > 1);
- push(@av_paren_type, $av_pending);
- $av_pending = '_';
- $type = 'N';
-
- } elsif ($cur =~ /^(\))/o) {
- my $new_type = pop(@av_paren_type);
- if ($new_type ne '_') {
- $type = $new_type;
- print "PAREN('$1') -> $type\n"
- if ($dbg_values > 1);
- } else {
- print "PAREN('$1')\n" if ($dbg_values > 1);
- }
-
- } elsif ($cur =~ /^($Ident)\s*\(/o) {
- print "FUNC($1)\n" if ($dbg_values > 1);
- $type = 'V';
- $av_pending = 'V';
-
- } elsif ($cur =~ /^($Ident\s*):(?:\s*\d+\s*(,|=|;))?/) {
- if (defined $2 && $type eq 'C' || $type eq 'T') {
- $av_pend_colon = 'B';
- } elsif ($type eq 'E') {
- $av_pend_colon = 'L';
- }
- print "IDENT_COLON($1,$type>$av_pend_colon)\n" if ($dbg_values > 1);
- $type = 'V';
-
- } elsif ($cur =~ /^($Ident|$Constant)/o) {
- print "IDENT($1)\n" if ($dbg_values > 1);
- $type = 'V';
-
- } elsif ($cur =~ /^($Assignment)/o) {
- print "ASSIGN($1)\n" if ($dbg_values > 1);
- $type = 'N';
-
- } elsif ($cur =~/^(;|{|})/) {
- print "END($1)\n" if ($dbg_values > 1);
- $type = 'E';
- $av_pend_colon = 'O';
-
- } elsif ($cur =~/^(,)/) {
- print "COMMA($1)\n" if ($dbg_values > 1);
- $type = 'C';
-
- } elsif ($cur =~ /^(\?)/o) {
- print "QUESTION($1)\n" if ($dbg_values > 1);
- $type = 'N';
-
- } elsif ($cur =~ /^(:)/o) {
- print "COLON($1,$av_pend_colon)\n" if ($dbg_values > 1);
-
- substr($var, length($res), 1, $av_pend_colon);
- if ($av_pend_colon eq 'C' || $av_pend_colon eq 'L') {
- $type = 'E';
- } else {
- $type = 'N';
- }
- $av_pend_colon = 'O';
-
- } elsif ($cur =~ /^(\[)/o) {
- print "CLOSE($1)\n" if ($dbg_values > 1);
- $type = 'N';
-
- } elsif ($cur =~ /^(-(?![->])|\+(?!\+)|\*|\&\&|\&)/o) {
- my $variant;
-
- print "OPV($1)\n" if ($dbg_values > 1);
- if ($type eq 'V') {
- $variant = 'B';
- } else {
- $variant = 'U';
- }
-
- substr($var, length($res), 1, $variant);
- $type = 'N';
-
- } elsif ($cur =~ /^($Operators)/o) {
- print "OP($1)\n" if ($dbg_values > 1);
- if ($1 ne '++' && $1 ne '--') {
- $type = 'N';
- }
-
- } elsif ($cur =~ /(^.)/o) {
- print "C($1)\n" if ($dbg_values > 1);
- }
- if (defined $1) {
- $cur = substr($cur, length($1));
- $res .= $type x length($1);
- }
- }
-
- return ($res, $var);
-}
-
-sub possible {
- my ($possible, $line) = @_;
- my $notPermitted = qr{(?:
- ^(?:
- $Modifier|
- $Storage|
- $Type|
- DEFINE_\S+
- )$|
- ^(?:
- goto|
- return|
- case|
- else|
- asm|__asm__|
- do|
- \#|
- \#\#|
- )(?:\s|$)|
- ^(?:typedef|struct|enum)\b
- )}x;
- warn "CHECK<$possible> ($line)\n" if ($dbg_possible > 2);
- if ($possible !~ $notPermitted) {
- # Check for modifiers.
- $possible =~ s/\s*$Storage\s*//g;
- $possible =~ s/\s*$Sparse\s*//g;
- if ($possible =~ /^\s*$/) {
-
- } elsif ($possible =~ /\s/) {
- $possible =~ s/\s*$Type\s*//g;
- for my $modifier (split(' ', $possible)) {
- if ($modifier !~ $notPermitted) {
- warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible);
- push(@modifierList, $modifier);
- }
- }
-
- } else {
- warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible);
- push(@typeList, $possible);
- }
- build_types();
- } else {
- warn "NOTPOSS: $possible ($line)\n" if ($dbg_possible > 1);
- }
-}
-
-my $prefix = '';
-
-sub show_type {
- my ($type) = @_;
-
- return defined $use_type{$type} if (scalar keys %use_type > 0);
-
- return !defined $ignore_type{$type};
-}
-
-sub report {
- my ($level, $type, $msg) = @_;
-
- if (!show_type($type) ||
- (defined $tst_only && $msg !~ /\Q$tst_only\E/)) {
- return 0;
- }
- my $line;
- if ($show_types) {
- $line = "$prefix$level:$type: $msg\n";
- } else {
- $line = "$prefix$level: $msg\n";
- }
- $line = (split('\n', $line))[0] . "\n" if ($terse);
-
- push(our @report, $line);
-
- return 1;
-}
-
-sub report_dump {
- our @report;
-}
-
-sub fixup_current_range {
- my ($lineRef, $offset, $length) = @_;
-
- if ($$lineRef =~ /^\@\@ -\d+,\d+ \+(\d+),(\d+) \@\@/) {
- my $o = $1;
- my $l = $2;
- my $no = $o + $offset;
- my $nl = $l + $length;
- $$lineRef =~ s/\+$o,$l \@\@/\+$no,$nl \@\@/;
- }
-}
-
-sub fix_inserted_deleted_lines {
- my ($linesRef, $insertedRef, $deletedRef) = @_;
-
- my $range_last_linenr = 0;
- my $delta_offset = 0;
-
- my $old_linenr = 0;
- my $new_linenr = 0;
-
- my $next_insert = 0;
- my $next_delete = 0;
-
- my @lines = ();
-
- my $inserted = @{$insertedRef}[$next_insert++];
- my $deleted = @{$deletedRef}[$next_delete++];
-
- foreach my $old_line (@{$linesRef}) {
- my $save_line = 1;
- my $line = $old_line; #don't modify the array
- if ($line =~ /^(?:\+\+\+\|\-\-\-)\s+\S+/) { #new filename
- $delta_offset = 0;
- } elsif ($line =~ /^\@\@ -\d+,\d+ \+\d+,\d+ \@\@/) { #new hunk
- $range_last_linenr = $new_linenr;
- fixup_current_range(\$line, $delta_offset, 0);
- }
-
- while (defined($deleted) && ${$deleted}{'LINENR'} == $old_linenr) {
- $deleted = @{$deletedRef}[$next_delete++];
- $save_line = 0;
- fixup_current_range(\$lines[$range_last_linenr], $delta_offset--, -1);
- }
-
- while (defined($inserted) && ${$inserted}{'LINENR'} == $old_linenr) {
- push(@lines, ${$inserted}{'LINE'});
- $inserted = @{$insertedRef}[$next_insert++];
- $new_linenr++;
- fixup_current_range(\$lines[$range_last_linenr], $delta_offset++, 1);
- }
-
- if ($save_line) {
- push(@lines, $line);
- $new_linenr++;
- }
-
- $old_linenr++;
- }
-
- return @lines;
-}
-
-sub fix_insert_line {
- my ($linenr, $line) = @_;
-
- my $inserted = {
- LINENR => $linenr,
- LINE => $line,
- };
- push(@fixed_inserted, $inserted);
-}
-
-sub fix_delete_line {
- my ($linenr, $line) = @_;
-
- my $deleted = {
- LINENR => $linenr,
- LINE => $line,
- };
-
- push(@fixed_deleted, $deleted);
-}
-
-sub ERROR {
- my ($type, $msg) = @_;
-
- if (report("ERROR", $type, $msg)) {
- our $clean = 0;
- our $cnt_error++;
- return 1;
- }
- return 0;
-}
-sub WARN {
- my ($type, $msg) = @_;
-
- if (report("WARNING", $type, $msg)) {
- our $clean = 0;
- our $cnt_warn++;
- return 1;
- }
- return 0;
-}
-sub CHK {
- my ($type, $msg) = @_;
-
- if ($check && report("CHECK", $type, $msg)) {
- our $clean = 0;
- our $cnt_chk++;
- return 1;
- }
- return 0;
-}
-
-sub check_absolute_file {
- my ($absolute, $herecurr) = @_;
- my $file = $absolute;
-
- ##print "absolute<$absolute>\n";
-
- # See if any suffix of this path is a path within the tree.
- while ($file =~ s@^[^/]*/@@) {
- if (-f "$root/$file") {
- ##print "file<$file>\n";
- last;
- }
- }
- if (! -f _) {
- return 0;
- }
-
- # It is, so see if the prefix is acceptable.
- my $prefix = $absolute;
- substr($prefix, -length($file)) = '';
-
- ##print "prefix<$prefix>\n";
- if ($prefix ne ".../") {
- WARN("USE_RELATIVE_PATH",
- "use relative pathname instead of absolute in changelog text\n" . $herecurr);
- }
-}
-
-sub trim {
- my ($string) = @_;
-
- $string =~ s/^\s+|\s+$//g;
-
- return $string;
-}
-
-sub ltrim {
- my ($string) = @_;
-
- $string =~ s/^\s+//;
-
- return $string;
-}
-
-sub rtrim {
- my ($string) = @_;
-
- $string =~ s/\s+$//;
-
- return $string;
-}
-
-sub string_find_replace {
- my ($string, $find, $replace) = @_;
-
- $string =~ s/$find/$replace/g;
-
- return $string;
-}
-
-sub tabify {
- my ($leading) = @_;
-
- my $source_indent = 8;
- my $max_spaces_before_tab = $source_indent - 1;
- my $spaces_to_tab = " " x $source_indent;
-
- #convert leading spaces to tabs
- 1 while $leading =~ s@^([\t]*)$spaces_to_tab@$1\t at g;
- #Remove spaces before a tab
- 1 while $leading =~ s@^([\t]*)( {1,$max_spaces_before_tab})\t@$1\t at g;
-
- return "$leading";
-}
-
-sub pos_last_openparen {
- my ($line) = @_;
-
- my $pos = 0;
-
- my $opens = $line =~ tr/\(/\(/;
- my $closes = $line =~ tr/\)/\)/;
-
- my $last_openparen = 0;
-
- if (($opens == 0) || ($closes >= $opens)) {
- return -1;
- }
-
- my $len = length($line);
-
- for ($pos = 0; $pos < $len; $pos++) {
- my $string = substr($line, $pos);
- if ($string =~ /^($FuncArg|$balanced_parens)/) {
- $pos += length($1) - 1;
- } elsif (substr($line, $pos, 1) eq '(') {
- $last_openparen = $pos;
- } elsif (index($string, '(') == -1) {
- last;
- }
- }
-
- return length(expand_tabs(substr($line, 0, $last_openparen))) + 1;
-}
-
-sub process {
- my $filename = shift;
-
- my $linenr=0;
- my $prevline="";
- my $prevrawline="";
- my $stashline="";
- my $stashrawline="";
-
- my $length;
- my $indent;
- my $previndent=0;
- my $stashindent=0;
-
- our $clean = 1;
- my $signoff = 0;
- my $is_patch = 0;
-
- my $in_header_lines = $file ? 0 : 1;
- my $in_commit_log = 0; #Scanning lines before patch
- my $reported_maintainer_file = 0;
- my $non_utf8_charset = 0;
-
- my $last_blank_line = 0;
- my $last_coalesced_string_linenr = -1;
-
- our @report = ();
- our $cnt_lines = 0;
- our $cnt_error = 0;
- our $cnt_warn = 0;
- our $cnt_chk = 0;
-
- # Trace the real file/line as we go.
- my $realfile = '';
- my $realline = 0;
- my $realcnt = 0;
- my $here = '';
- my $in_comment = 0;
- my $comment_edge = 0;
- my $first_line = 0;
- my $p1_prefix = '';
-
- my $prev_values = 'E';
-
- # suppression flags
- my %suppress_ifbraces;
- my %suppress_whiletrailers;
- my %suppress_export;
- my $suppress_statement = 0;
-
- my %signatures = ();
-
- # Pre-scan the patch sanitizing the lines.
- # Pre-scan the patch looking for any __setup documentation.
- #
- my @setup_docs = ();
- my $setup_docs = 0;
-
- my $camelcase_file_seeded = 0;
-
- sanitise_line_reset();
- my $line;
- foreach my $rawline (@rawlines) {
- $linenr++;
- $line = $rawline;
-
- push(@fixed, $rawline) if ($fix);
-
- if ($rawline=~/^\+\+\+\s+(\S+)/) {
- $setup_docs = 0;
- if ($1 =~ m at Documentation/kernel-parameters.txt$@) {
- $setup_docs = 1;
- }
- #next;
- }
- if ($rawline=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
- $realline=$1-1;
- if (defined $2) {
- $realcnt=$3+1;
- } else {
- $realcnt=1+1;
- }
- $in_comment = 0;
-
- # Guestimate if this is a continuing comment. Run
- # the context looking for a comment "edge". If this
- # edge is a close comment then we must be in a comment
- # at context start.
- my $edge;
- my $cnt = $realcnt;
- for (my $ln = $linenr + 1; $cnt > 0; $ln++) {
- next if (defined $rawlines[$ln - 1] &&
- $rawlines[$ln - 1] =~ /^-/);
- $cnt--;
- #print "RAW<$rawlines[$ln - 1]>\n";
- last if (!defined $rawlines[$ln - 1]);
- if ($rawlines[$ln - 1] =~ m@(/\*|\*/)@ &&
- $rawlines[$ln - 1] !~ m@"[^"]*(?:/\*|\*/)[^"]*"@) {
- ($edge) = $1;
- last;
- }
- }
- if (defined $edge && $edge eq '*/') {
- $in_comment = 1;
- }
-
- # Guestimate if this is a continuing comment. If this
- # is the start of a diff block and this line starts
- # ' *' then it is very likely a comment.
- if (!defined $edge &&
- $rawlines[$linenr] =~ m@^.\s*(?:\*\*+| \*)(?:\s|$)@)
- {
- $in_comment = 1;
- }
-
- ##print "COMMENT:$in_comment edge<$edge> $rawline\n";
- sanitise_line_reset($in_comment);
-
- } elsif ($realcnt && $rawline =~ /^(?:\+| |$)/) {
- # Standardise the strings and chars within the input to
- # simplify matching -- only bother with positive lines.
- $line = sanitise_line($rawline);
- }
- push(@lines, $line);
-
- if ($realcnt > 1) {
- $realcnt-- if ($line =~ /^(?:\+| |$)/);
- } else {
- $realcnt = 0;
- }
-
- #print "==>$rawline\n";
- #print "-->$line\n";
-
- if ($setup_docs && $line =~ /^\+/) {
- push(@setup_docs, $line);
- }
- }
-
- $prefix = '';
-
- $realcnt = 0;
- $linenr = 0;
- $fixlinenr = -1;
- foreach my $line (@lines) {
- $linenr++;
- $fixlinenr++;
- my $sline = $line; #copy of $line
- $sline =~ s/$;/ /g; #with comments as spaces
-
- my $rawline = $rawlines[$linenr - 1];
-
-#extract the line range in the file after the patch is applied
- if ($line=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
- $is_patch = 1;
- $first_line = $linenr + 1;
- $realline=$1-1;
- if (defined $2) {
- $realcnt=$3+1;
- } else {
- $realcnt=1+1;
- }
- annotate_reset();
- $prev_values = 'E';
-
- %suppress_ifbraces = ();
- %suppress_whiletrailers = ();
- %suppress_export = ();
- $suppress_statement = 0;
- next;
-
-# track the line number as we move through the hunk, note that
-# new versions of GNU diff omit the leading space on completely
-# blank context lines so we need to count that too.
- } elsif ($line =~ /^( |\+|$)/) {
- $realline++;
- $realcnt-- if ($realcnt != 0);
-
- # Measure the line length and indent.
- ($length, $indent) = line_stats($rawline);
-
- # Track the previous line.
- ($prevline, $stashline) = ($stashline, $line);
- ($previndent, $stashindent) = ($stashindent, $indent);
- ($prevrawline, $stashrawline) = ($stashrawline, $rawline);
-
- #warn "line<$line>\n";
-
- } elsif ($realcnt == 1) {
- $realcnt--;
- }
-
- my $hunk_line = ($realcnt != 0);
-
-#make up the handle for any error we report on this line
- $prefix = "$filename:$realline: " if ($emacs && $file);
- $prefix = "$filename:$linenr: " if ($emacs && !$file);
-
- $here = "#$linenr: " if (!$file);
- $here = "#$realline: " if ($file);
-
- my $found_file = 0;
- # extract the filename as it passes
- if ($line =~ /^diff --git.*?(\S+)$/) {
- $realfile = $1;
- $realfile =~ s@^([^/]*)/@@ if (!$file);
- $in_commit_log = 0;
- $found_file = 1;
- } elsif ($line =~ /^\+\+\+\s+(\S+)/) {
- $realfile = $1;
- $realfile =~ s@^([^/]*)/@@ if (!$file);
- $in_commit_log = 0;
-
- $p1_prefix = $1;
- if (!$file && $tree && $p1_prefix ne '' &&
- -e "$root/$p1_prefix") {
- WARN("PATCH_PREFIX",
- "patch prefix '$p1_prefix' exists, appears to be a -p0 patch\n");
- }
-
- if ($realfile =~ m@^include/asm/@) {
- ERROR("MODIFIED_INCLUDE_ASM",
- "do not modify files in include/asm, change architecture specific files in include/asm-<architecture>\n" . "$here$rawline\n");
- }
- $found_file = 1;
- }
-
- if ($found_file) {
- if ($realfile =~ m@^(drivers/net/|net/)@) {
- $check = 1;
- } else {
- $check = $check_orig;
- }
- next;
- }
-
- $here .= "FILE: $realfile:$realline:" if ($realcnt != 0);
-
- my $hereline = "$here\n$rawline\n";
- my $herecurr = "$here\n$rawline\n";
- my $hereprev = "$here\n$prevrawline\n$rawline\n";
-
- $cnt_lines++ if ($realcnt != 0);
-
-# Check for incorrect file permissions
- if ($line =~ /^new (file )?mode.*[7531]\d{0,2}$/) {
- my $permhere = $here . "FILE: $realfile\n";
- if ($realfile !~ m at util/lint/@ &&
- $realfile !~ m at util/scripts/@ &&
- $realfile !~ /\.(py|pl|awk|sh)$/) {
- ERROR("EXECUTE_PERMISSIONS",
- "do not set execute permissions for source files\n" . $permhere);
- }
- }
-
-# Check the patch for a signoff:
- if ($line =~ /^\s*signed-off-by:/i) {
- $signoff++;
- $in_commit_log = 0;
- }
-
-# Check if MAINTAINERS is being updated. If so, there's probably no need to
-# emit the "does MAINTAINERS need updating?" message on file add/move/delete
- if ($line =~ /^\s*MAINTAINERS\s*\|/) {
- $reported_maintainer_file = 1;
- }
-
-# Check signature styles
- if (!$in_header_lines &&
- $line =~ /^(\s*)([a-z0-9_-]+by:|$signature_tags)(\s*)(.*)/i) {
- my $space_before = $1;
- my $sign_off = $2;
- my $space_after = $3;
- my $email = $4;
- my $ucfirst_sign_off = ucfirst(lc($sign_off));
-
- if ($sign_off !~ /$signature_tags/) {
- WARN("BAD_SIGN_OFF",
- "Non-standard signature: $sign_off\n" . $herecurr);
- }
- if (defined $space_before && $space_before ne "") {
- if (WARN("BAD_SIGN_OFF",
- "Do not use whitespace before $ucfirst_sign_off\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =
- "$ucfirst_sign_off $email";
- }
- }
- if ($sign_off =~ /-by:$/i && $sign_off ne $ucfirst_sign_off) {
- if (WARN("BAD_SIGN_OFF",
- "'$ucfirst_sign_off' is the preferred signature form\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =
- "$ucfirst_sign_off $email";
- }
-
- }
- if (!defined $space_after || $space_after ne " ") {
- if (WARN("BAD_SIGN_OFF",
- "Use a single space after $ucfirst_sign_off\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =
- "$ucfirst_sign_off $email";
- }
- }
-
- my ($email_name, $email_address, $comment) = parse_email($email);
- my $suggested_email = format_email(($email_name, $email_address));
- if ($suggested_email eq "") {
- ERROR("BAD_SIGN_OFF",
- "Unrecognized email address: '$email'\n" . $herecurr);
- } else {
- my $dequoted = $suggested_email;
- $dequoted =~ s/^"//;
- $dequoted =~ s/" </ </;
- # Don't force email to have quotes
- # Allow just an angle bracketed address
- if ("$dequoted$comment" ne $email &&
- "<$email_address>$comment" ne $email &&
- "$suggested_email$comment" ne $email) {
- WARN("BAD_SIGN_OFF",
- "email address '$email' might be better as '$suggested_email$comment'\n" . $herecurr);
- }
- }
-
-# Check for duplicate signatures
- my $sig_nospace = $line;
- $sig_nospace =~ s/\s//g;
- $sig_nospace = lc($sig_nospace);
- if (defined $signatures{$sig_nospace}) {
- WARN("BAD_SIGN_OFF",
- "Duplicate signature\n" . $herecurr);
- } else {
- $signatures{$sig_nospace} = 1;
- }
- }
-
-# Check for old stable address
- if ($line =~ /^\s*cc:\s*.*<?\bstable\@kernel\.org\b>?.*$/i) {
- ERROR("STABLE_ADDRESS",
- "The 'stable' address should be 'stable\@vger.kernel.org'\n" . $herecurr);
- }
-
-# Check for unwanted Gerrit info
- if ($in_commit_log && $line =~ /^\s*change-id:/i) {
- ERROR("GERRIT_CHANGE_ID",
- "Remove Gerrit Change-Id's before submitting upstream.\n" . $herecurr);
- }
-
-# Check for improperly formed commit descriptions
- if ($in_commit_log &&
- $line =~ /\bcommit\s+[0-9a-f]{5,}/i &&
- !($line =~ /\b[Cc]ommit [0-9a-f]{12,40} \("/ ||
- ($line =~ /\b[Cc]ommit [0-9a-f]{12,40}\s*$/ &&
- defined $rawlines[$linenr] &&
- $rawlines[$linenr] =~ /^\s*\("/))) {
- $line =~ /\b(c)ommit\s+([0-9a-f]{5,})/i;
- my $init_char = $1;
- my $orig_commit = lc($2);
- my $id = '01234567890ab';
- my $desc = 'commit description';
- ($id, $desc) = git_commit_info($orig_commit, $id, $desc);
- ERROR("GIT_COMMIT_ID",
- "Please use 12 or more chars for the git commit ID like: '${init_char}ommit $id (\"$desc\")'\n" . $herecurr);
- }
-
-# Check for added, moved or deleted files
- if (!$reported_maintainer_file && !$in_commit_log &&
- ($line =~ /^(?:new|deleted) file mode\s*\d+\s*$/ ||
- $line =~ /^rename (?:from|to) [\w\/\.\-]+\s*$/ ||
- ($line =~ /\{\s*([\w\/\.\-]*)\s*\=\>\s*([\w\/\.\-]*)\s*\}/ &&
- (defined($1) || defined($2))))) {
- $reported_maintainer_file = 1;
- CHK("FILE_PATH_CHANGES",
- "added, moved or deleted file(s), does MAINTAINERS need updating?\n" . $herecurr);
- }
-
-# Check for wrappage within a valid hunk of the file
- if ($realcnt != 0 && $line !~ m{^(?:\+|-| |\\ No newline|$)}) {
- ERROR("CORRUPTED_PATCH",
- "patch seems to be corrupt (line wrapped?)\n" .
- $herecurr) if (!$emitted_corrupt++);
- }
-
-# Check for absolute kernel paths.
- if ($tree) {
- while ($line =~ m{(?:^|\s)(/\S*)}g) {
- my $file = $1;
-
- if ($file =~ m{^(.*?)(?::\d+)+:?$} &&
- check_absolute_file($1, $herecurr)) {
- #
- } else {
- check_absolute_file($file, $herecurr);
- }
- }
- }
-
-# UTF-8 regex found at http://www.w3.org/International/questions/qa-forms-utf-8.en.php
- if (($realfile =~ /^$/ || $line =~ /^\+/) &&
- $rawline !~ m/^$UTF8*$/) {
- my ($utf8_prefix) = ($rawline =~ /^($UTF8*)/);
-
- my $blank = copy_spacing($rawline);
- my $ptr = substr($blank, 0, length($utf8_prefix)) . "^";
- my $hereptr = "$hereline$ptr\n";
-
- CHK("INVALID_UTF8",
- "Invalid UTF-8, patch and commit message should be encoded in UTF-8\n" . $hereptr);
- }
-
-# Check if it's the start of a commit log
-# (not a header line and we haven't seen the patch filename)
- if ($in_header_lines && $realfile =~ /^$/ &&
- !($rawline =~ /^\s+\S/ ||
- $rawline =~ /^(commit\b|from\b|[\w-]+:).*$/i)) {
- $in_header_lines = 0;
- $in_commit_log = 1;
- }
-
-# Check if there is UTF-8 in a commit log when a mail header has explicitly
-# declined it, i.e defined some charset where it is missing.
- if ($in_header_lines &&
- $rawline =~ /^Content-Type:.+charset="(.+)".*$/ &&
- $1 !~ /utf-8/i) {
- $non_utf8_charset = 1;
- }
-
- if ($in_commit_log && $non_utf8_charset && $realfile =~ /^$/ &&
- $rawline =~ /$NON_ASCII_UTF8/) {
- WARN("UTF8_BEFORE_PATCH",
- "8-bit UTF-8 used in possible commit log\n" . $herecurr);
- }
-
-# Check for various typo / spelling mistakes
- if (defined($misspellings) && ($in_commit_log || $line =~ /^\+/)) {
- while ($rawline =~ /(?:^|[^a-z@])($misspellings)(?:$|[^a-z@])/gi) {
- my $typo = $1;
- my $typo_fix = $spelling_fix{lc($typo)};
- $typo_fix = ucfirst($typo_fix) if ($typo =~ /^[A-Z]/);
- $typo_fix = uc($typo_fix) if ($typo =~ /^[A-Z]+$/);
- my $msg_type = \&WARN;
- $msg_type = \&CHK if ($file);
- if (&{$msg_type}("TYPO_SPELLING",
- "'$typo' may be misspelled - perhaps '$typo_fix'?\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/(^|[^A-Za-z@])($typo)($|[^A-Za-z@])/$1$typo_fix$3/;
- }
- }
- }
-
-# ignore non-hunk lines and lines being removed
- next if (!$hunk_line || $line =~ /^-/);
-
-#trailing whitespace
- if ($line =~ /^\+.*\015/) {
- my $herevet = "$here\n" . cat_vet($rawline) . "\n";
- if (ERROR("DOS_LINE_ENDINGS",
- "DOS line endings\n" . $herevet) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/[\s\015]+$//;
- }
- } elsif ($rawline =~ /^\+.*\S\s+$/ || $rawline =~ /^\+\s+$/) {
- my $herevet = "$here\n" . cat_vet($rawline) . "\n";
- if (ERROR("TRAILING_WHITESPACE",
- "trailing whitespace\n" . $herevet) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/\s+$//;
- }
-
- $rpt_cleaners = 1;
- }
-
-# Check for FSF mailing addresses.
- if ($rawline =~ /\bwrite to the Free/i ||
- $rawline =~ /\b59\s+Temple\s+Pl/i ||
- $rawline =~ /\b51\s+Franklin\s+St/i) {
- my $herevet = "$here\n" . cat_vet($rawline) . "\n";
- my $msg_type = \&ERROR;
- $msg_type = \&CHK if ($file);
- &{$msg_type}("FSF_MAILING_ADDRESS",
- "Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so again. Linux already includes a copy of the GPL.\n" . $herevet)
- }
-
-# check for Kconfig help text having a real description
-# Only applies when adding the entry originally, after that we do not have
-# sufficient context to determine whether it is indeed long enough.
- if ($realfile =~ /Kconfig/ &&
- $line =~ /^\+\s*config\s+/) {
- my $length = 0;
- my $cnt = $realcnt;
- my $ln = $linenr + 1;
- my $f;
- my $is_start = 0;
- my $is_end = 0;
- for (; $cnt > 0 && defined $lines[$ln - 1]; $ln++) {
- $f = $lines[$ln - 1];
- $cnt-- if ($lines[$ln - 1] !~ /^-/);
- $is_end = $lines[$ln - 1] =~ /^\+/;
-
- next if ($f =~ /^-/);
- last if (!$file && $f =~ /^\@\@/);
-
- if ($lines[$ln - 1] =~ /^\+\s*(?:bool|tristate)\s*\"/) {
- $is_start = 1;
- } elsif ($lines[$ln - 1] =~ /^\+\s*(?:---)?help(?:---)?$/) {
- $length = -1;
- }
-
- $f =~ s/^.//;
- $f =~ s/#.*//;
- $f =~ s/^\s+//;
- next if ($f =~ /^$/);
- if ($f =~ /^\s*config\s/) {
- $is_end = 1;
- last;
- }
- $length++;
- }
- if ($is_start && $is_end && $length < $min_conf_desc_length) {
- WARN("CONFIG_DESCRIPTION",
- "please write a paragraph that describes the config symbol fully\n" . $herecurr);
- }
- #print "is_start<$is_start> is_end<$is_end> length<$length>\n";
- }
-
-# discourage the addition of CONFIG_EXPERIMENTAL in Kconfig.
- if ($realfile =~ /Kconfig/ &&
- $line =~ /.\s*depends on\s+.*\bEXPERIMENTAL\b/) {
- WARN("CONFIG_EXPERIMENTAL",
- "Use of CONFIG_EXPERIMENTAL is deprecated. For alternatives, see https://lkml.org/lkml/2012/10/23/580\n");
- }
-
- if (($realfile =~ /Makefile.*/ || $realfile =~ /Kbuild.*/) &&
- ($line =~ /\+(EXTRA_[A-Z]+FLAGS).*/)) {
- my $flag = $1;
- my $replacement = {
- 'EXTRA_AFLAGS' => 'asflags-y',
- 'EXTRA_CFLAGS' => 'ccflags-y',
- 'EXTRA_CPPFLAGS' => 'cppflags-y',
- 'EXTRA_LDFLAGS' => 'ldflags-y',
- };
-
- WARN("DEPRECATED_VARIABLE",
- "Use of $flag is deprecated, please use \`$replacement->{$flag} instead.\n" . $herecurr) if ($replacement->{$flag});
- }
-
-# check for DT compatible documentation
- if (defined $root &&
- (($realfile =~ /\.dtsi?$/ && $line =~ /^\+\s*compatible\s*=\s*\"/) ||
- ($realfile =~ /\.[ch]$/ && $line =~ /^\+.*\.compatible\s*=\s*\"/))) {
-
- my @compats = $rawline =~ /\"([a-zA-Z0-9\-\,\.\+_]+)\"/g;
-
- my $dt_path = $root . "/Documentation/devicetree/bindings/";
- my $vp_file = $dt_path . "vendor-prefixes.txt";
-
- foreach my $compat (@compats) {
- my $compat2 = $compat;
- $compat2 =~ s/\,[a-zA-Z0-9]*\-/\,<\.\*>\-/;
- my $compat3 = $compat;
- $compat3 =~ s/\,([a-z]*)[0-9]*\-/\,$1<\.\*>\-/;
- `grep -Erq "$compat|$compat2|$compat3" $dt_path`;
- if ( $? >> 8 ) {
- WARN("UNDOCUMENTED_DT_STRING",
- "DT compatible string \"$compat\" appears un-documented -- check $dt_path\n" . $herecurr);
- }
-
- next if $compat !~ /^([a-zA-Z0-9\-]+)\,/;
- my $vendor = $1;
- `grep -Eq "^$vendor\\b" $vp_file`;
- if ( $? >> 8 ) {
- WARN("UNDOCUMENTED_DT_STRING",
- "DT compatible string vendor \"$vendor\" appears un-documented -- check $vp_file\n" . $herecurr);
- }
- }
- }
-
-# check we are in a valid source file if not then ignore this hunk
- next if ($realfile !~ /\.(h|c|s|S|pl|sh|dtsi|dts)$/);
-
-#line length limit
- if ($line =~ /^\+/ && $prevrawline !~ /\/\*\*/ &&
- $rawline !~ /^.\s*\*\s*\@$Ident\s/ &&
- !($line =~ /^\+\s*$logFunctions\s*\(\s*(?:(KERN_\S+\s*|[^"]*))?"[X\t]*"\s*(?:|,|\)\s*;)\s*$/ ||
- $line =~ /^\+\s*"[^"]*"\s*(?:\s*|,|\)\s*;)\s*$/) &&
- $length > $max_line_length)
- {
- WARN("LONG_LINE",
- "line over $max_line_length characters\n" . $herecurr);
- }
-
-# check for adding lines without a newline.
- if ($line =~ /^\+/ && defined $lines[$linenr] && $lines[$linenr] =~ /^\\ No newline at end of file/) {
- WARN("MISSING_EOF_NEWLINE",
- "adding a line without newline at end of file\n" . $herecurr);
- }
-
-# Blackfin: use hi/lo macros
- if ($realfile =~ m at arch/blackfin/.*\.S$@) {
- if ($line =~ /\.[lL][[:space:]]*=.*&[[:space:]]*0x[fF][fF][fF][fF]/) {
- my $herevet = "$here\n" . cat_vet($line) . "\n";
- ERROR("LO_MACRO",
- "use the LO() macro, not (... & 0xFFFF)\n" . $herevet);
- }
- if ($line =~ /\.[hH][[:space:]]*=.*>>[[:space:]]*16/) {
- my $herevet = "$here\n" . cat_vet($line) . "\n";
- ERROR("HI_MACRO",
- "use the HI() macro, not (... >> 16)\n" . $herevet);
- }
- }
-
-# check we are in a valid source file C or perl if not then ignore this hunk
- next if ($realfile !~ /\.(h|c|pl|dtsi|dts)$/);
-
-# at the beginning of a line any tabs must come first and anything
-# more than 8 must use tabs.
- if ($rawline =~ /^\+\s* \t\s*\S/ ||
- $rawline =~ /^\+\s* \s*/) {
- my $herevet = "$here\n" . cat_vet($rawline) . "\n";
- $rpt_cleaners = 1;
- if (ERROR("CODE_INDENT",
- "code indent should use tabs where possible\n" . $herevet) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/^\+([ \t]+)/"\+" . tabify($1)/e;
- }
- }
-
-# check for space before tabs.
- if ($rawline =~ /^\+/ && $rawline =~ / \t/) {
- my $herevet = "$here\n" . cat_vet($rawline) . "\n";
- if (WARN("SPACE_BEFORE_TAB",
- "please, no space before tabs\n" . $herevet) &&
- $fix) {
- while ($fixed[$fixlinenr] =~
- s/(^\+.*) {8,8}\t/$1\t\t/) {}
- while ($fixed[$fixlinenr] =~
- s/(^\+.*) +\t/$1\t/) {}
- }
- }
-
-# check for && or || at the start of a line
- if ($rawline =~ /^\+\s*(&&|\|\|)/) {
- CHK("LOGICAL_CONTINUATIONS",
- "Logical continuations should be on the previous line\n" . $hereprev);
- }
-
-# check multi-line statement indentation matches previous line
- if ($^V && $^V ge 5.10.0 &&
- $prevline =~ /^\+([ \t]*)((?:$c90_Keywords(?:\s+if)\s*)|(?:$Declare\s*)?(?:$Ident|\(\s*\*\s*$Ident\s*\))\s*|$Ident\s*=\s*$Ident\s*)\(.*(\&\&|\|\||,)\s*$/) {
- $prevline =~ /^\+(\t*)(.*)$/;
- my $oldindent = $1;
- my $rest = $2;
-
- my $pos = pos_last_openparen($rest);
- if ($pos >= 0) {
- $line =~ /^(\+| )([ \t]*)/;
- my $newindent = $2;
-
- my $goodtabindent = $oldindent .
- "\t" x ($pos / 8) .
- " " x ($pos % 8);
- my $goodspaceindent = $oldindent . " " x $pos;
-
- if ($newindent ne $goodtabindent &&
- $newindent ne $goodspaceindent) {
-
- if (CHK("PARENTHESIS_ALIGNMENT",
- "Alignment should match open parenthesis\n" . $hereprev) &&
- $fix && $line =~ /^\+/) {
- $fixed[$fixlinenr] =~
- s/^\+[ \t]*/\+$goodtabindent/;
- }
- }
- }
- }
-
- if ($line =~ /^\+.*(\w+\s*)?\(\s*$Type\s*\)[ \t]+(?!$Assignment|$Arithmetic|[,;\({\[\<\>])/ &&
- (!defined($1) || $1 !~ /sizeof\s*/)) {
- if (CHK("SPACING",
- "No space is necessary after a cast\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~
- s/(\(\s*$Type\s*\))[ \t]+/$1/;
- }
- }
-
- if ($realfile =~ m@^(drivers/net/|net/)@ &&
- $prevrawline =~ /^\+[ \t]*\/\*[ \t]*$/ &&
- $rawline =~ /^\+[ \t]*\*/ &&
- $realline > 2) {
- WARN("NETWORKING_BLOCK_COMMENT_STYLE",
- "networking block comments don't use an empty /* line, use /* Comment...\n" . $hereprev);
- }
-
- if ($realfile =~ m@^(drivers/net/|net/)@ &&
- $prevrawline =~ /^\+[ \t]*\/\*/ && #starting /*
- $prevrawline !~ /\*\/[ \t]*$/ && #no trailing */
- $rawline =~ /^\+/ && #line is new
- $rawline !~ /^\+[ \t]*\*/) { #no leading *
- WARN("NETWORKING_BLOCK_COMMENT_STYLE",
- "networking block comments start with * on subsequent lines\n" . $hereprev);
- }
-
- if ($realfile =~ m@^(drivers/net/|net/)@ &&
- $rawline !~ m@^\+[ \t]*\*/[ \t]*$@ && #trailing */
- $rawline !~ m@^\+.*/\*.*\*/[ \t]*$@ && #inline /*...*/
- $rawline !~ m@^\+.*\*{2,}/[ \t]*$@ && #trailing **/
- $rawline =~ m@^\+[ \t]*.+\*\/[ \t]*$@) { #non blank */
- WARN("NETWORKING_BLOCK_COMMENT_STYLE",
- "networking block comments put the trailing */ on a separate line\n" . $herecurr);
- }
-
-# check for missing blank lines after struct/union declarations
-# with exceptions for various attributes and macros
- if ($prevline =~ /^[\+ ]};?\s*$/ &&
- $line =~ /^\+/ &&
- !($line =~ /^\+\s*$/ ||
- $line =~ /^\+\s*EXPORT_SYMBOL/ ||
- $line =~ /^\+\s*MODULE_/i ||
- $line =~ /^\+\s*\#\s*(?:end|elif|else)/ ||
- $line =~ /^\+[a-z_]*init/ ||
- $line =~ /^\+\s*(?:static\s+)?[A-Z_]*ATTR/ ||
- $line =~ /^\+\s*DECLARE/ ||
- $line =~ /^\+\s*__setup/)) {
- if (CHK("LINE_SPACING",
- "Please use a blank line after function/struct/union/enum declarations\n" . $hereprev) &&
- $fix) {
- fix_insert_line($fixlinenr, "\+");
- }
- }
-
-# check for multiple consecutive blank lines
- if ($prevline =~ /^[\+ ]\s*$/ &&
- $line =~ /^\+\s*$/ &&
- $last_blank_line != ($linenr - 1)) {
- if (CHK("LINE_SPACING",
- "Please don't use multiple blank lines\n" . $hereprev) &&
- $fix) {
- fix_delete_line($fixlinenr, $rawline);
- }
-
- $last_blank_line = $linenr;
- }
-
-# check for missing blank lines after declarations
- if ($sline =~ /^\+\s+\S/ && #Not at char 1
- # actual declarations
- ($prevline =~ /^\+\s+$Declare\s*$Ident\s*[=,;:\[]/ ||
- # function pointer declarations
- $prevline =~ /^\+\s+$Declare\s*\(\s*\*\s*$Ident\s*\)\s*[=,;:\[\(]/ ||
- # foo bar; where foo is some local typedef or #define
- $prevline =~ /^\+\s+$Ident(?:\s+|\s*\*\s*)$Ident\s*[=,;\[]/ ||
- # known declaration macros
- $prevline =~ /^\+\s+$declaration_macros/) &&
- # for "else if" which can look like "$Ident $Ident"
- !($prevline =~ /^\+\s+$c90_Keywords\b/ ||
- # other possible extensions of declaration lines
- $prevline =~ /(?:$Compare|$Assignment|$Operators)\s*$/ ||
- # not starting a section or a macro "\" extended line
- $prevline =~ /(?:\{\s*|\\)$/) &&
- # looks like a declaration
- !($sline =~ /^\+\s+$Declare\s*$Ident\s*[=,;:\[]/ ||
- # function pointer declarations
- $sline =~ /^\+\s+$Declare\s*\(\s*\*\s*$Ident\s*\)\s*[=,;:\[\(]/ ||
- # foo bar; where foo is some local typedef or #define
- $sline =~ /^\+\s+$Ident(?:\s+|\s*\*\s*)$Ident\s*[=,;\[]/ ||
- # known declaration macros
- $sline =~ /^\+\s+$declaration_macros/ ||
- # start of struct or union or enum
- $sline =~ /^\+\s+(?:union|struct|enum|typedef)\b/ ||
- # start or end of block or continuation of declaration
- $sline =~ /^\+\s+(?:$|[\{\}\.\#\"\?\:\(\[])/ ||
- # bitfield continuation
- $sline =~ /^\+\s+$Ident\s*:\s*\d+\s*[,;]/ ||
- # other possible extensions of declaration lines
- $sline =~ /^\+\s+\(?\s*(?:$Compare|$Assignment|$Operators)/) &&
- # indentation of previous and current line are the same
- (($prevline =~ /\+(\s+)\S/) && $sline =~ /^\+$1\S/)) {
- if (WARN("LINE_SPACING",
- "Missing a blank line after declarations\n" . $hereprev) &&
- $fix) {
- fix_insert_line($fixlinenr, "\+");
- }
- }
-
-# check for spaces at the beginning of a line.
-# Exceptions:
-# 1) within comments
-# 2) indented preprocessor commands
-# 3) hanging labels
- if ($rawline =~ /^\+ / && $line !~ /^\+ *(?:$;|#|$Ident:)/) {
- my $herevet = "$here\n" . cat_vet($rawline) . "\n";
- if (WARN("LEADING_SPACE",
- "please, no spaces at the start of a line\n" . $herevet) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/^\+([ \t]+)/"\+" . tabify($1)/e;
- }
- }
-
-# check we are in a valid C source file if not then ignore this hunk
- next if ($realfile !~ /\.(h|c)$/);
-
-# check indentation of any line with a bare else
-# (but not if it is a multiple line "if (foo) return bar; else return baz;")
-# if the previous line is a break or return and is indented 1 tab more...
- if ($sline =~ /^\+([\t]+)(?:}[ \t]*)?else(?:[ \t]*{)?\s*$/) {
- my $tabs = length($1) + 1;
- if ($prevline =~ /^\+\t{$tabs,$tabs}break\b/ ||
- ($prevline =~ /^\+\t{$tabs,$tabs}return\b/ &&
- defined $lines[$linenr] &&
- $lines[$linenr] !~ /^[ \+]\t{$tabs,$tabs}return/)) {
- WARN("UNNECESSARY_ELSE",
- "else is not generally useful after a break or return\n" . $hereprev);
- }
- }
-
-# check indentation of a line with a break;
-# if the previous line is a goto or return and is indented the same # of tabs
- if ($sline =~ /^\+([\t]+)break\s*;\s*$/) {
- my $tabs = $1;
- if ($prevline =~ /^\+$tabs(?:goto|return)\b/) {
- WARN("UNNECESSARY_BREAK",
- "break is not useful after a goto or return\n" . $hereprev);
- }
- }
-
-# discourage the addition of CONFIG_EXPERIMENTAL in #if(def).
- if ($line =~ /^\+\s*\#\s*if.*\bCONFIG_EXPERIMENTAL\b/) {
- WARN("CONFIG_EXPERIMENTAL",
- "Use of CONFIG_EXPERIMENTAL is deprecated. For alternatives, see https://lkml.org/lkml/2012/10/23/580\n");
- }
-
-# check for RCS/CVS revision markers
- if ($rawline =~ /^\+.*\$(Revision|Log|Id)(?:\$|)/) {
- WARN("CVS_KEYWORD",
- "CVS style keyword markers, these will _not_ be updated\n". $herecurr);
- }
-
-# Blackfin: don't use __builtin_bfin_[cs]sync
- if ($line =~ /__builtin_bfin_csync/) {
- my $herevet = "$here\n" . cat_vet($line) . "\n";
- ERROR("CSYNC",
- "use the CSYNC() macro in asm/blackfin.h\n" . $herevet);
- }
- if ($line =~ /__builtin_bfin_ssync/) {
- my $herevet = "$here\n" . cat_vet($line) . "\n";
- ERROR("SSYNC",
- "use the SSYNC() macro in asm/blackfin.h\n" . $herevet);
- }
-
-# check for old HOTPLUG __dev<foo> section markings
- if ($line =~ /\b(__dev(init|exit)(data|const|))\b/) {
- WARN("HOTPLUG_SECTION",
- "Using $1 is unnecessary\n" . $herecurr);
- }
-
-# Check for potential 'bare' types
- my ($stat, $cond, $line_nr_next, $remain_next, $off_next,
- $realline_next);
-#print "LINE<$line>\n";
- if ($linenr >= $suppress_statement &&
- $realcnt && $sline =~ /.\s*\S/) {
- ($stat, $cond, $line_nr_next, $remain_next, $off_next) =
- ctx_statement_block($linenr, $realcnt, 0);
- $stat =~ s/\n./\n /g;
- $cond =~ s/\n./\n /g;
-
-#print "linenr<$linenr> <$stat>\n";
- # If this statement has no statement boundaries within
- # it there is no point in retrying a statement scan
- # until we hit end of it.
- my $frag = $stat; $frag =~ s/;+\s*$//;
- if ($frag !~ /(?:{|;)/) {
-#print "skip<$line_nr_next>\n";
- $suppress_statement = $line_nr_next;
- }
-
- # Find the real next line.
- $realline_next = $line_nr_next;
- if (defined $realline_next &&
- (!defined $lines[$realline_next - 1] ||
- substr($lines[$realline_next - 1], $off_next) =~ /^\s*$/)) {
- $realline_next++;
- }
-
- my $s = $stat;
- $s =~ s/{.*$//s;
-
- # Ignore goto labels.
- if ($s =~ /$Ident:\*$/s) {
-
- # Ignore functions being called
- } elsif ($s =~ /^.\s*$Ident\s*\(/s) {
-
- } elsif ($s =~ /^.\s*else\b/s) {
-
- # declarations always start with types
- } elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?((?:\s*$Ident)+?)\b(?:\s+$Sparse)?\s*\**\s*(?:$Ident|\(\*[^\)]*\))(?:\s*$Modifier)?\s*(?:;|=|,|\()/s) {
- my $type = $1;
- $type =~ s/\s+/ /g;
- possible($type, "A:" . $s);
-
- # definitions in global scope can only start with types
- } elsif ($s =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b\s*(?!:)/s) {
- possible($1, "B:" . $s);
- }
-
- # any (foo ... *) is a pointer cast, and foo is a type
- while ($s =~ /\(($Ident)(?:\s+$Sparse)*[\s\*]+\s*\)/sg) {
- possible($1, "C:" . $s);
- }
-
- # Check for any sort of function declaration.
- # int foo(something bar, other baz);
- # void (*store_gdt)(x86_descr_ptr *);
- if ($prev_values eq 'E' && $s =~ /^(.(?:typedef\s*)?(?:(?:$Storage|$Inline)\s*)*\s*$Type\s*(?:\b$Ident|\(\*\s*$Ident\))\s*)\(/s) {
- my ($name_len) = length($1);
-
- my $ctx = $s;
- substr($ctx, 0, $name_len + 1, '');
- $ctx =~ s/\)[^\)]*$//;
-
- for my $arg (split(/\s*,\s*/, $ctx)) {
- if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/s || $arg =~ /^($Ident)$/s) {
-
- possible($1, "D:" . $s);
- }
- }
- }
-
- }
-
-#
-# Checks which may be anchored in the context.
-#
-
-# Check for switch () and associated case and default
-# statements should be at the same indent.
- if ($line=~/\bswitch\s*\(.*\)/) {
- my $err = '';
- my $sep = '';
- my @ctx = ctx_block_outer($linenr, $realcnt);
- shift(@ctx);
- for my $ctx (@ctx) {
- my ($clen, $cindent) = line_stats($ctx);
- if ($ctx =~ /^\+\s*(case\s+|default:)/ &&
- $indent != $cindent) {
- $err .= "$sep$ctx\n";
- $sep = '';
- } else {
- $sep = "[...]\n";
- }
- }
- if ($err ne '') {
- ERROR("SWITCH_CASE_INDENT_LEVEL",
- "switch and case should be at the same indent\n$hereline$err");
- }
- }
-
-# if/while/etc brace do not go on next line, unless defining a do while loop,
-# or if that brace on the next line is for something else
- if ($line =~ /(.*)\b((?:if|while|for|switch|(?:[a-z_]+|)for_each[a-z_]+)\s*\(|do\b|else\b)/ && $line !~ /^.\s*\#/) {
- my $pre_ctx = "$1$2";
-
- my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0);
-
- if ($line =~ /^\+\t{6,}/) {
- WARN("DEEP_INDENTATION",
- "Too many leading tabs - consider code refactoring\n" . $herecurr);
- }
-
- my $ctx_cnt = $realcnt - $#ctx - 1;
- my $ctx = join("\n", @ctx);
-
- my $ctx_ln = $linenr;
- my $ctx_skip = $realcnt;
-
- while ($ctx_skip > $ctx_cnt || ($ctx_skip == $ctx_cnt &&
- defined $lines[$ctx_ln - 1] &&
- $lines[$ctx_ln - 1] =~ /^-/)) {
- ##print "SKIP<$ctx_skip> CNT<$ctx_cnt>\n";
- $ctx_skip-- if (!defined $lines[$ctx_ln - 1] || $lines[$ctx_ln - 1] !~ /^-/);
- $ctx_ln++;
- }
-
- #print "realcnt<$realcnt> ctx_cnt<$ctx_cnt>\n";
- #print "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n";
-
- if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln - 1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
- ERROR("OPEN_BRACE",
- "that open brace { should be on the previous line\n" .
- "$here\n$ctx\n$rawlines[$ctx_ln - 1]\n");
- }
- if ($level == 0 && $pre_ctx !~ /}\s*while\s*\($/ &&
- $ctx =~ /\)\s*\;\s*$/ &&
- defined $lines[$ctx_ln - 1])
- {
- my ($nlength, $nindent) = line_stats($lines[$ctx_ln - 1]);
- if ($nindent > $indent) {
- WARN("TRAILING_SEMICOLON",
- "trailing semicolon indicates no statements, indent implies otherwise\n" .
- "$here\n$ctx\n$rawlines[$ctx_ln - 1]\n");
- }
- }
- }
-
-# Check relative indent for conditionals and blocks.
- if ($line =~ /\b(?:(?:if|while|for|(?:[a-z_]+|)for_each[a-z_]+)\s*\(|do\b)/ && $line !~ /^.\s*#/ && $line !~ /\}\s*while\s*/) {
- ($stat, $cond, $line_nr_next, $remain_next, $off_next) =
- ctx_statement_block($linenr, $realcnt, 0)
- if (!defined $stat);
- my ($s, $c) = ($stat, $cond);
-
- substr($s, 0, length($c), '');
-
- # Make sure we remove the line prefixes as we have
- # none on the first line, and are going to readd them
- # where necessary.
- $s =~ s/\n./\n/gs;
-
- # Find out how long the conditional actually is.
- my @newlines = ($c =~ /\n/gs);
- my $cond_lines = 1 + $#newlines;
-
- # We want to check the first line inside the block
- # starting at the end of the conditional, so remove:
- # 1) any blank line termination
- # 2) any opening brace { on end of the line
- # 3) any do (...) {
- my $continuation = 0;
- my $check = 0;
- $s =~ s/^.*\bdo\b//;
- $s =~ s/^\s*{//;
- if ($s =~ s/^\s*\\//) {
- $continuation = 1;
- }
- if ($s =~ s/^\s*?\n//) {
- $check = 1;
- $cond_lines++;
- }
-
- # Also ignore a loop construct at the end of a
- # preprocessor statement.
- if (($prevline =~ /^.\s*#\s*define\s/ ||
- $prevline =~ /\\\s*$/) && $continuation == 0) {
- $check = 0;
- }
-
- my $cond_ptr = -1;
- $continuation = 0;
- while ($cond_ptr != $cond_lines) {
- $cond_ptr = $cond_lines;
-
- # If we see an #else/#elif then the code
- # is not linear.
- if ($s =~ /^\s*\#\s*(?:else|elif)/) {
- $check = 0;
- }
-
- # Ignore:
- # 1) blank lines, they should be at 0,
- # 2) preprocessor lines, and
- # 3) labels.
- if ($continuation ||
- $s =~ /^\s*?\n/ ||
- $s =~ /^\s*#\s*?/ ||
- $s =~ /^\s*$Ident\s*:/) {
- $continuation = ($s =~ /^.*?\\\n/) ? 1 : 0;
- if ($s =~ s/^.*?\n//) {
- $cond_lines++;
- }
- }
- }
-
- my (undef, $sindent) = line_stats("+" . $s);
- my $stat_real = raw_line($linenr, $cond_lines);
-
- # Check if either of these lines are modified, else
- # this is not this patch's fault.
- if (!defined($stat_real) ||
- $stat !~ /^\+/ && $stat_real !~ /^\+/) {
- $check = 0;
- }
- if (defined($stat_real) && $cond_lines > 1) {
- $stat_real = "[...]\n$stat_real";
- }
-
- #print "line<$line> prevline<$prevline> indent<$indent> sindent<$sindent> check<$check> continuation<$continuation> s<$s> cond_lines<$cond_lines> stat_real<$stat_real> stat<$stat>\n";
-
- if ($check && (($sindent % 8) != 0 ||
- ($sindent <= $indent && $s ne ''))) {
- WARN("SUSPECT_CODE_INDENT",
- "suspect code indent for conditional statements ($indent, $sindent)\n" . $herecurr . "$stat_real\n");
- }
- }
-
- # Track the 'values' across context and added lines.
- my $opline = $line; $opline =~ s/^./ /;
- my ($curr_values, $curr_vars) =
- annotate_values($opline . "\n", $prev_values);
- $curr_values = $prev_values . $curr_values;
- if ($dbg_values) {
- my $outline = $opline; $outline =~ s/\t/ /g;
- print "$linenr > .$outline\n";
- print "$linenr > $curr_values\n";
- print "$linenr > $curr_vars\n";
- }
- $prev_values = substr($curr_values, -1);
-
-#ignore lines not being added
- next if ($line =~ /^[^\+]/);
-
-# TEST: allow direct testing of the type matcher.
- if ($dbg_type) {
- if ($line =~ /^.\s*$Declare\s*$/) {
- ERROR("TEST_TYPE",
- "TEST: is type\n" . $herecurr);
- } elsif ($dbg_type > 1 && $line =~ /^.+($Declare)/) {
- ERROR("TEST_NOT_TYPE",
- "TEST: is not type ($1 is)\n". $herecurr);
- }
- next;
- }
-# TEST: allow direct testing of the attribute matcher.
- if ($dbg_attr) {
- if ($line =~ /^.\s*$Modifier\s*$/) {
- ERROR("TEST_ATTR",
- "TEST: is attr\n" . $herecurr);
- } elsif ($dbg_attr > 1 && $line =~ /^.+($Modifier)/) {
- ERROR("TEST_NOT_ATTR",
- "TEST: is not attr ($1 is)\n". $herecurr);
- }
- next;
- }
-
-# check for initialisation to aggregates open brace on the next line
- if ($line =~ /^.\s*{/ &&
- $prevline =~ /(?:^|[^=])=\s*$/) {
- if (ERROR("OPEN_BRACE",
- "that open brace { should be on the previous line\n" . $hereprev) &&
- $fix && $prevline =~ /^\+/ && $line =~ /^\+/) {
- fix_delete_line($fixlinenr - 1, $prevrawline);
- fix_delete_line($fixlinenr, $rawline);
- my $fixedline = $prevrawline;
- $fixedline =~ s/\s*=\s*$/ = {/;
- fix_insert_line($fixlinenr, $fixedline);
- $fixedline = $line;
- $fixedline =~ s/^(.\s*){\s*/$1/;
- fix_insert_line($fixlinenr, $fixedline);
- }
- }
-
-#
-# Checks which are anchored on the added line.
-#
-
-# check for malformed paths in #include statements (uses RAW line)
- if ($rawline =~ m{^.\s*\#\s*include\s+[<"](.*)[">]}) {
- my $path = $1;
- if ($path =~ m{//}) {
- ERROR("MALFORMED_INCLUDE",
- "malformed #include filename\n" . $herecurr);
- }
- if ($path =~ "^uapi/" && $realfile =~ m@\binclude/uapi/@) {
- ERROR("UAPI_INCLUDE",
- "No #include in ...include/uapi/... should use a uapi/ path prefix\n" . $herecurr);
- }
- }
-
-# no C99 // comments
- if ($line =~ m{//}) {
- if (CHK("C99_COMMENTS",
- "do not use C99 // comments\n" . $herecurr) &&
- $fix) {
- my $line = $fixed[$fixlinenr];
- if ($line =~ /\/\/(.*)$/) {
- my $comment = trim($1);
- $fixed[$fixlinenr] =~ s@\/\/(.*)$@/\* $comment \*/@;
- }
- }
- }
- # Remove C99 comments.
- $line =~ s@//.*@@;
- $opline =~ s@//.*@@;
-
-# EXPORT_SYMBOL should immediately follow the thing it is exporting, consider
-# the whole statement.
-#print "APW <$lines[$realline_next - 1]>\n";
- if (defined $realline_next &&
- exists $lines[$realline_next - 1] &&
- !defined $suppress_export{$realline_next} &&
- ($lines[$realline_next - 1] =~ /EXPORT_SYMBOL.*\((.*)\)/ ||
- $lines[$realline_next - 1] =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) {
- # Handle definitions which produce identifiers with
- # a prefix:
- # XXX(foo);
- # EXPORT_SYMBOL(something_foo);
- my $name = $1;
- if ($stat =~ /^(?:.\s*}\s*\n)?.([A-Z_]+)\s*\(\s*($Ident)/ &&
- $name =~ /^${Ident}_$2/) {
-#print "FOO C name<$name>\n";
- $suppress_export{$realline_next} = 1;
-
- } elsif ($stat !~ /(?:
- \n.}\s*$|
- ^.DEFINE_$Ident\(\Q$name\E\)|
- ^.DECLARE_$Ident\(\Q$name\E\)|
- ^.LIST_HEAD\(\Q$name\E\)|
- ^.(?:$Storage\s+)?$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(|
- \b\Q$name\E(?:\s+$Attribute)*\s*(?:;|=|\[|\()
- )/x) {
-#print "FOO A<$lines[$realline_next - 1]> stat<$stat> name<$name>\n";
- $suppress_export{$realline_next} = 2;
- } else {
- $suppress_export{$realline_next} = 1;
- }
- }
- if (!defined $suppress_export{$linenr} &&
- $prevline =~ /^.\s*$/ &&
- ($line =~ /EXPORT_SYMBOL.*\((.*)\)/ ||
- $line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) {
-#print "FOO B <$lines[$linenr - 1]>\n";
- $suppress_export{$linenr} = 2;
- }
- if (defined $suppress_export{$linenr} &&
- $suppress_export{$linenr} == 2) {
- WARN("EXPORT_SYMBOL",
- "EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr);
- }
-
-# check for global initialisers.
- if ($line =~ /^\+(\s*$Type\s*$Ident\s*(?:\s+$Modifier))*\s*=\s*(0|NULL|false)\s*;/) {
- if (ERROR("GLOBAL_INITIALISERS",
- "do not initialise globals to 0 or NULL\n" .
- $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/($Type\s*$Ident\s*(?:\s+$Modifier))*\s*=\s*(0|NULL|false)\s*;/$1;/;
- }
- }
-# check for static initialisers.
- if ($line =~ /^\+.*\bstatic\s.*=\s*(0|NULL|false)\s*;/) {
- if (ERROR("INITIALISED_STATIC",
- "do not initialise statics to 0 or NULL\n" .
- $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/(\bstatic\s.*?)\s*=\s*(0|NULL|false)\s*;/$1;/;
- }
- }
-
-# check for misordered declarations of char/short/int/long with signed/unsigned
- while ($sline =~ m{(\b$TypeMisordered\b)}g) {
- my $tmp = trim($1);
- WARN("MISORDERED_TYPE",
- "type '$tmp' should be specified in [[un]signed] [short|int|long|long long] order\n" . $herecurr);
- }
-
-# check for static const char * arrays.
- if ($line =~ /\bstatic\s+const\s+char\s*\*\s*(\w+)\s*\[\s*\]\s*=\s*/) {
- WARN("STATIC_CONST_CHAR_ARRAY",
- "static const char * array should probably be static const char * const\n" .
- $herecurr);
- }
-
-# check for static char foo[] = "bar" declarations.
- if ($line =~ /\bstatic\s+char\s+(\w+)\s*\[\s*\]\s*=\s*"/) {
- WARN("STATIC_CONST_CHAR_ARRAY",
- "static char array declaration should probably be static const char\n" .
- $herecurr);
- }
-
-# check for non-global char *foo[] = {"bar", ...} declarations.
- if ($line =~ /^.\s+(?:static\s+|const\s+)?char\s+\*\s*\w+\s*\[\s*\]\s*=\s*\{/) {
- WARN("STATIC_CONST_CHAR_ARRAY",
- "char * array declaration might be better as static const\n" .
- $herecurr);
- }
-
-# check for function declarations without arguments like "int foo()"
- if ($line =~ /(\b$Type\s+$Ident)\s*\(\s*\)/) {
- if (ERROR("FUNCTION_WITHOUT_ARGS",
- "Bad function definition - $1() should probably be $1(void)\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/(\b($Type)\s+($Ident))\s*\(\s*\)/$2 $3(void)/;
- }
- }
-
-# check for uses of DEFINE_PCI_DEVICE_TABLE
- if ($line =~ /\bDEFINE_PCI_DEVICE_TABLE\s*\(\s*(\w+)\s*\)\s*=/) {
- if (WARN("DEFINE_PCI_DEVICE_TABLE",
- "Prefer struct pci_device_id over deprecated DEFINE_PCI_DEVICE_TABLE\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/\b(?:static\s+|)DEFINE_PCI_DEVICE_TABLE\s*\(\s*(\w+)\s*\)\s*=\s*/static const struct pci_device_id $1\[\] = /;
- }
- }
-
-# check for new typedefs, only function parameters and sparse annotations
-# make sense.
- if ($line =~ /\btypedef\s/ &&
- $line !~ /\btypedef\s+$Type\s*\(\s*\*?$Ident\s*\)\s*\(/ &&
- $line !~ /\btypedef\s+$Type\s+$Ident\s*\(/ &&
- $line !~ /\b$typeTypedefs\b/ &&
- $line !~ /\b__bitwise(?:__|)\b/) {
- WARN("NEW_TYPEDEFS",
- "do not add new typedefs\n" . $herecurr);
- }
-
-# * goes on variable not on type
- # (char*[ const])
- while ($line =~ m{(\($NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)\))}g) {
- #print "AA<$1>\n";
- my ($ident, $from, $to) = ($1, $2, $2);
-
- # Should start with a space.
- $to =~ s/^(\S)/ $1/;
- # Should not end with a space.
- $to =~ s/\s+$//;
- # '*'s should not have spaces between.
- while ($to =~ s/\*\s+\*/\*\*/) {
- }
-
-## print "1: from<$from> to<$to> ident<$ident>\n";
- if ($from ne $to) {
- if (ERROR("POINTER_LOCATION",
- "\"(foo$from)\" should be \"(foo$to)\"\n" . $herecurr) &&
- $fix) {
- my $sub_from = $ident;
- my $sub_to = $ident;
- $sub_to =~ s/\Q$from\E/$to/;
- $fixed[$fixlinenr] =~
- s@\Q$sub_from\E@$sub_to@;
- }
- }
- }
- while ($line =~ m{(\b$NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)($Ident))}g) {
- #print "BB<$1>\n";
- my ($match, $from, $to, $ident) = ($1, $2, $2, $3);
-
- # Should start with a space.
- $to =~ s/^(\S)/ $1/;
- # Should not end with a space.
- $to =~ s/\s+$//;
- # '*'s should not have spaces between.
- while ($to =~ s/\*\s+\*/\*\*/) {
- }
- # Modifiers should have spaces.
- $to =~ s/(\b$Modifier$)/$1 /;
-
-## print "2: from<$from> to<$to> ident<$ident>\n";
- if ($from ne $to && $ident !~ /^$Modifier$/) {
- if (ERROR("POINTER_LOCATION",
- "\"foo${from}bar\" should be \"foo${to}bar\"\n" . $herecurr) &&
- $fix) {
-
- my $sub_from = $match;
- my $sub_to = $match;
- $sub_to =~ s/\Q$from\E/$to/;
- $fixed[$fixlinenr] =~
- s@\Q$sub_from\E@$sub_to@;
- }
- }
- }
-
-# # no BUG() or BUG_ON()
-# if ($line =~ /\b(BUG|BUG_ON)\b/) {
-# print "Try to use WARN_ON & Recovery code rather than BUG() or BUG_ON()\n";
-# print "$herecurr";
-# $clean = 0;
-# }
-
- if ($line =~ /\bLINUX_VERSION_CODE\b/) {
- WARN("LINUX_VERSION_CODE",
- "LINUX_VERSION_CODE should be avoided, code should be for the version to which it is merged\n" . $herecurr);
- }
-
-# check for uses of printk_ratelimit
- if ($line =~ /\bprintk_ratelimit\s*\(/) {
- WARN("PRINTK_RATELIMITED",
-"Prefer printk_ratelimited or pr_<level>_ratelimited to printk_ratelimit\n" . $herecurr);
- }
-
-# printk should use KERN_* levels. Note that follow on printk's on the
-# same line do not need a level, so we use the current block context
-# to try and find and validate the current printk. In summary the current
-# printk includes all preceding printk's which have no newline on the end.
-# we assume the first bad printk is the one to report.
- if ($line =~ /\bprintk\((?!KERN_)\s*"/) {
- my $ok = 0;
- for (my $ln = $linenr - 1; $ln >= $first_line; $ln--) {
- #print "CHECK<$lines[$ln - 1]\n";
- # we have a preceding printk if it ends
- # with "\n" ignore it, else it is to blame
- if ($lines[$ln - 1] =~ m{\bprintk\(}) {
- if ($rawlines[$ln - 1] !~ m{\\n"}) {
- $ok = 1;
- }
- last;
- }
- }
- if ($ok == 0) {
- WARN("PRINTK_WITHOUT_KERN_LEVEL",
- "printk() should include KERN_ facility level\n" . $herecurr);
- }
- }
-
- if ($line =~ /\bprintk\s*\(\s*KERN_([A-Z]+)/) {
- my $orig = $1;
- my $level = lc($orig);
- $level = "warn" if ($level eq "warning");
- my $level2 = $level;
- $level2 = "dbg" if ($level eq "debug");
- WARN("PREFER_PR_LEVEL",
- "Prefer [subsystem eg: netdev]_$level2([subsystem]dev, ... then dev_$level2(dev, ... then pr_$level(... to printk(KERN_$orig ...\n" . $herecurr);
- }
-
- if ($line =~ /\bpr_warning\s*\(/) {
- if (WARN("PREFER_PR_LEVEL",
- "Prefer pr_warn(... to pr_warning(...\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~
- s/\bpr_warning\b/pr_warn/;
- }
- }
-
- if ($line =~ /\bdev_printk\s*\(\s*KERN_([A-Z]+)/) {
- my $orig = $1;
- my $level = lc($orig);
- $level = "warn" if ($level eq "warning");
- $level = "dbg" if ($level eq "debug");
- WARN("PREFER_DEV_LEVEL",
- "Prefer dev_$level(... to dev_printk(KERN_$orig, ...\n" . $herecurr);
- }
-
-# function brace can't be on same line, except for #defines of do while,
-# or if closed on same line
- if (($line=~/$Type\s*$Ident\(.*\).*\s*{/) and
- !($line=~/\#\s*define.*do\s\{/) and !($line=~/}/)) {
- if (ERROR("OPEN_BRACE",
- "open brace '{' following function declarations go on the next line\n" . $herecurr) &&
- $fix) {
- fix_delete_line($fixlinenr, $rawline);
- my $fixed_line = $rawline;
- $fixed_line =~ /(^..*$Type\s*$Ident\(.*\)\s*){(.*)$/;
- my $line1 = $1;
- my $line2 = $2;
- fix_insert_line($fixlinenr, ltrim($line1));
- fix_insert_line($fixlinenr, "\+{");
- if ($line2 !~ /^\s*$/) {
- fix_insert_line($fixlinenr, "\+\t" . trim($line2));
- }
- }
- }
-
-# open braces for enum, union and struct go on the same line.
- if ($line =~ /^.\s*{/ &&
- $prevline =~ /^.\s*(?:typedef\s+)?(enum|union|struct)(?:\s+$Ident)?\s*$/) {
- if (ERROR("OPEN_BRACE",
- "open brace '{' following $1 go on the same line\n" . $hereprev) &&
- $fix && $prevline =~ /^\+/ && $line =~ /^\+/) {
- fix_delete_line($fixlinenr - 1, $prevrawline);
- fix_delete_line($fixlinenr, $rawline);
- my $fixedline = rtrim($prevrawline) . " {";
- fix_insert_line($fixlinenr, $fixedline);
- $fixedline = $rawline;
- $fixedline =~ s/^(.\s*){\s*/$1\t/;
- if ($fixedline !~ /^\+\s*$/) {
- fix_insert_line($fixlinenr, $fixedline);
- }
- }
- }
-
-# missing space after union, struct or enum definition
- if ($line =~ /^.\s*(?:typedef\s+)?(enum|union|struct)(?:\s+$Ident){1,2}[=\{]/) {
- if (WARN("SPACING",
- "missing space after $1 definition\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~
- s/^(.\s*(?:typedef\s+)?(?:enum|union|struct)(?:\s+$Ident){1,2})([=\{])/$1 $2/;
- }
- }
-
-# Function pointer declarations
-# check spacing between type, funcptr, and args
-# canonical declaration is "type (*funcptr)(args...)"
- if ($line =~ /^.\s*($Declare)\((\s*)\*(\s*)($Ident)(\s*)\)(\s*)\(/) {
- my $declare = $1;
- my $pre_pointer_space = $2;
- my $post_pointer_space = $3;
- my $funcname = $4;
- my $post_funcname_space = $5;
- my $pre_args_space = $6;
-
-# the $Declare variable will capture all spaces after the type
-# so check it for a missing trailing missing space but pointer return types
-# don't need a space so don't warn for those.
- my $post_declare_space = "";
- if ($declare =~ /(\s+)$/) {
- $post_declare_space = $1;
- $declare = rtrim($declare);
- }
- if ($declare !~ /\*$/ && $post_declare_space =~ /^$/) {
- WARN("SPACING",
- "missing space after return type\n" . $herecurr);
- $post_declare_space = " ";
- }
-
-# unnecessary space "type (*funcptr)(args...)"
-# This test is not currently implemented because these declarations are
-# equivalent to
-# int foo(int bar, ...)
-# and this is form shouldn't/doesn't generate a checkpatch warning.
-#
-# elsif ($declare =~ /\s{2,}$/) {
-# WARN("SPACING",
-# "Multiple spaces after return type\n" . $herecurr);
-# }
-
-# unnecessary space "type ( *funcptr)(args...)"
- if (defined $pre_pointer_space &&
- $pre_pointer_space =~ /^\s/) {
- WARN("SPACING",
- "Unnecessary space after function pointer open parenthesis\n" . $herecurr);
- }
-
-# unnecessary space "type (* funcptr)(args...)"
- if (defined $post_pointer_space &&
- $post_pointer_space =~ /^\s/) {
- WARN("SPACING",
- "Unnecessary space before function pointer name\n" . $herecurr);
- }
-
-# unnecessary space "type (*funcptr )(args...)"
- if (defined $post_funcname_space &&
- $post_funcname_space =~ /^\s/) {
- WARN("SPACING",
- "Unnecessary space after function pointer name\n" . $herecurr);
- }
-
-# unnecessary space "type (*funcptr) (args...)"
- if (defined $pre_args_space &&
- $pre_args_space =~ /^\s/) {
- WARN("SPACING",
- "Unnecessary space before function pointer arguments\n" . $herecurr);
- }
-
- if (show_type("SPACING") && $fix) {
- $fixed[$fixlinenr] =~
- s/^(.\s*)$Declare\s*\(\s*\*\s*$Ident\s*\)\s*\(/$1 . $declare . $post_declare_space . '(*' . $funcname . ')('/ex;
- }
- }
-
-# check for spacing round square brackets; allowed:
-# 1. with a type on the left -- int [] a;
-# 2. at the beginning of a line for slice initialisers -- [0...10] = 5,
-# 3. inside a curly brace -- = { [0...10] = 5 }
-# 4. in an extended asm instruction -- : [r0]"r"(r0)
- while ($line =~ /(.*?\s)\[/g) {
- my ($where, $prefix) = ($-[1], $1);
- if ($prefix !~ /$Type\s+$/ &&
- ($where != 0 || $prefix !~ /^.\s+$/) &&
- $prefix !~ /[{,:]\s+$/) {
- if (ERROR("BRACKET_SPACE",
- "space prohibited before open square bracket '['\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~
- s/^(\+.*?)\s+\[/$1\[/;
- }
- }
- }
-
-# check for spaces between functions and their parentheses.
- while ($line =~ /($Ident)\s+\(/g) {
- my $name = $1;
- my $ctx_before = substr($line, 0, $-[1]);
- my $ctx = "$ctx_before$name";
-
- # Ignore those directives where spaces _are_ permitted.
- if ($name =~ /^(?:
- if|for|while|switch|return|case|
- volatile|__volatile__|
- __attribute__|format|__extension__|
- asm|__asm__)$/x)
- {
- # cpp #define statements have non-optional spaces, ie
- # if there is a space between the name and the open
- # parenthesis it is simply not a parameter group.
- } elsif ($ctx_before =~ /^.\s*\#\s*define\s*$/) {
-
- # cpp #elif statement condition may start with a (
- } elsif ($ctx =~ /^.\s*\#\s*elif\s*$/) {
-
- # If this whole things ends with a type its most
- # likely a typedef for a function.
- } elsif ($ctx =~ /$Type$/) {
-
- } else {
- if (WARN("SPACING",
- "space prohibited between function name and open parenthesis '('\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~
- s/\b$name\s+\(/$name\(/;
- }
- }
- }
-
-# Check operator spacing.
- if (!($line=~/\#\s*include/)) {
- my $fixed_line = "";
- my $line_fixed = 0;
-
- my $ops = qr{
- <<=|>>=|<=|>=|==|!=|
- \+=|-=|\*=|\/=|%=|\^=|\|=|&=|
- =>|->|<<|>>|<|>|=|!|~|
- &&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/|%|
- \?:|\?|:
- }x;
- my @elements = split(/($ops|;)/, $opline);
-
-## print("element count: <" . $#elements . ">\n");
-## foreach my $el (@elements) {
-## print("el: <$el>\n");
-## }
-
- my @fix_elements = ();
- my $off = 0;
-
- foreach my $el (@elements) {
- push(@fix_elements, substr($rawline, $off, length($el)));
- $off += length($el);
- }
-
- $off = 0;
-
- my $blank = copy_spacing($opline);
- my $last_after = -1;
-
- for (my $n = 0; $n < $#elements; $n += 2) {
-
- my $good = $fix_elements[$n] . $fix_elements[$n + 1];
-
-## print("n: <$n> good: <$good>\n");
-
- $off += length($elements[$n]);
-
- # Pick up the preceding and succeeding characters.
- my $ca = substr($opline, 0, $off);
- my $cc = '';
- if (length($opline) >= ($off + length($elements[$n + 1]))) {
- $cc = substr($opline, $off + length($elements[$n + 1]));
- }
- my $cb = "$ca$;$cc";
-
- my $a = '';
- $a = 'V' if ($elements[$n] ne '');
- $a = 'W' if ($elements[$n] =~ /\s$/);
- $a = 'C' if ($elements[$n] =~ /$;$/);
- $a = 'B' if ($elements[$n] =~ /(\[|\()$/);
- $a = 'O' if ($elements[$n] eq '');
- $a = 'E' if ($ca =~ /^\s*$/);
-
- my $op = $elements[$n + 1];
-
- my $c = '';
- if (defined $elements[$n + 2]) {
- $c = 'V' if ($elements[$n + 2] ne '');
- $c = 'W' if ($elements[$n + 2] =~ /^\s/);
- $c = 'C' if ($elements[$n + 2] =~ /^$;/);
- $c = 'B' if ($elements[$n + 2] =~ /^(\)|\]|;)/);
- $c = 'O' if ($elements[$n + 2] eq '');
- $c = 'E' if ($elements[$n + 2] =~ /^\s*\\$/);
- } else {
- $c = 'E';
- }
-
- my $ctx = "${a}x${c}";
-
- my $at = "(ctx:$ctx)";
-
- my $ptr = substr($blank, 0, $off) . "^";
- my $hereptr = "$hereline$ptr\n";
-
- # Pull out the value of this operator.
- my $op_type = substr($curr_values, $off + 1, 1);
-
- # Get the full operator variant.
- my $opv = $op . substr($curr_vars, $off, 1);
-
- # Ignore operators passed as parameters.
- if ($op_type ne 'V' &&
- $ca =~ /\s$/ && $cc =~ /^\s*,/) {
-
-# # Ignore comments
-# } elsif ($op =~ /^$;+$/) {
-
- # ; should have either the end of line or a space or \ after it
- } elsif ($op eq ';') {
- if ($ctx !~ /.x[WEBC]/ &&
- $cc !~ /^\\/ && $cc !~ /^;/) {
- if (ERROR("SPACING",
- "space required after that '$op' $at\n" . $hereptr)) {
- $good = $fix_elements[$n] . trim($fix_elements[$n + 1]) . " ";
- $line_fixed = 1;
- }
- }
-
- # // is a comment
- } elsif ($op eq '//') {
-
- # : when part of a bitfield
- } elsif ($opv eq ':B') {
- # skip the bitfield test for now
-
- # No spaces for:
- # ->
- } elsif ($op eq '->') {
- if ($ctx =~ /Wx.|.xW/) {
- if (ERROR("SPACING",
- "spaces prohibited around that '$op' $at\n" . $hereptr)) {
- $good = rtrim($fix_elements[$n]) . trim($fix_elements[$n + 1]);
- if (defined $fix_elements[$n + 2]) {
- $fix_elements[$n + 2] =~ s/^\s+//;
- }
- $line_fixed = 1;
- }
- }
-
- # , must not have a space before and must have a space on the right.
- } elsif ($op eq ',') {
- my $rtrim_before = 0;
- my $space_after = 0;
- if ($ctx =~ /Wx./) {
- if (ERROR("SPACING",
- "space prohibited before that '$op' $at\n" . $hereptr)) {
- $line_fixed = 1;
- $rtrim_before = 1;
- }
- }
- if ($ctx !~ /.x[WEC]/ && $cc !~ /^}/) {
- if (ERROR("SPACING",
- "space required after that '$op' $at\n" . $hereptr)) {
- $line_fixed = 1;
- $last_after = $n;
- $space_after = 1;
- }
- }
- if ($rtrim_before || $space_after) {
- if ($rtrim_before) {
- $good = rtrim($fix_elements[$n]) . trim($fix_elements[$n + 1]);
- } else {
- $good = $fix_elements[$n] . trim($fix_elements[$n + 1]);
- }
- if ($space_after) {
- $good .= " ";
- }
- }
-
- # '*' as part of a type definition -- reported already.
- } elsif ($opv eq '*_') {
- #warn "'*' is part of type\n";
-
- # unary operators should have a space before and
- # none after. May be left adjacent to another
- # unary operator, or a cast
- } elsif ($op eq '!' || $op eq '~' ||
- $opv eq '*U' || $opv eq '-U' ||
- $opv eq '&U' || $opv eq '&&U') {
- if ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) {
- if (ERROR("SPACING",
- "space required before that '$op' $at\n" . $hereptr)) {
- if ($n != $last_after + 2) {
- $good = $fix_elements[$n] . " " . ltrim($fix_elements[$n + 1]);
- $line_fixed = 1;
- }
- }
- }
- if ($op eq '*' && $cc =~/\s*$Modifier\b/) {
- # A unary '*' may be const
-
- } elsif ($ctx =~ /.xW/) {
- if (ERROR("SPACING",
- "space prohibited after that '$op' $at\n" . $hereptr)) {
- $good = $fix_elements[$n] . rtrim($fix_elements[$n + 1]);
- if (defined $fix_elements[$n + 2]) {
- $fix_elements[$n + 2] =~ s/^\s+//;
- }
- $line_fixed = 1;
- }
- }
-
- # unary ++ and unary -- are allowed no space on one side.
- } elsif ($op eq '++' or $op eq '--') {
- if ($ctx !~ /[WEOBC]x[^W]/ && $ctx !~ /[^W]x[WOBEC]/) {
- if (ERROR("SPACING",
- "space required one side of that '$op' $at\n" . $hereptr)) {
- $good = $fix_elements[$n] . trim($fix_elements[$n + 1]) . " ";
- $line_fixed = 1;
- }
- }
- if ($ctx =~ /Wx[BE]/ ||
- ($ctx =~ /Wx./ && $cc =~ /^;/)) {
- if (ERROR("SPACING",
- "space prohibited before that '$op' $at\n" . $hereptr)) {
- $good = rtrim($fix_elements[$n]) . trim($fix_elements[$n + 1]);
- $line_fixed = 1;
- }
- }
- if ($ctx =~ /ExW/) {
- if (ERROR("SPACING",
- "space prohibited after that '$op' $at\n" . $hereptr)) {
- $good = $fix_elements[$n] . trim($fix_elements[$n + 1]);
- if (defined $fix_elements[$n + 2]) {
- $fix_elements[$n + 2] =~ s/^\s+//;
- }
- $line_fixed = 1;
- }
- }
-
- # << and >> may either have or not have spaces both sides
- } elsif ($op eq '<<' or $op eq '>>' or
- $op eq '&' or $op eq '^' or $op eq '|' or
- $op eq '+' or $op eq '-' or
- $op eq '*' or $op eq '/' or
- $op eq '%')
- {
- if ($ctx =~ /Wx[^WCE]|[^WCE]xW/) {
- if (ERROR("SPACING",
- "need consistent spacing around '$op' $at\n" . $hereptr)) {
- $good = rtrim($fix_elements[$n]) . " " . trim($fix_elements[$n + 1]) . " ";
- if (defined $fix_elements[$n + 2]) {
- $fix_elements[$n + 2] =~ s/^\s+//;
- }
- $line_fixed = 1;
- }
- }
-
- # A colon needs no spaces before when it is
- # terminating a case value or a label.
- } elsif ($opv eq ':C' || $opv eq ':L') {
- if ($ctx =~ /Wx./) {
- if (ERROR("SPACING",
- "space prohibited before that '$op' $at\n" . $hereptr)) {
- $good = rtrim($fix_elements[$n]) . trim($fix_elements[$n + 1]);
- $line_fixed = 1;
- }
- }
-
- # All the others need spaces both sides.
- } elsif ($ctx !~ /[EWC]x[CWE]/) {
- my $ok = 0;
-
- # Ignore email addresses <foo at bar>
- if (($op eq '<' &&
- $cc =~ /^\S+\@\S+>/) ||
- ($op eq '>' &&
- $ca =~ /<\S+\@\S+$/))
- {
- $ok = 1;
- }
-
- # messages are ERROR, but ?: are CHK
- if ($ok == 0) {
- my $msg_type = \&ERROR;
- $msg_type = \&CHK if (($op eq '?:' || $op eq '?' || $op eq ':') && $ctx =~ /VxV/);
-
- if (&{$msg_type}("SPACING",
- "spaces required around that '$op' $at\n" . $hereptr)) {
- $good = rtrim($fix_elements[$n]) . " " . trim($fix_elements[$n + 1]) . " ";
- if (defined $fix_elements[$n + 2]) {
- $fix_elements[$n + 2] =~ s/^\s+//;
- }
- $line_fixed = 1;
- }
- }
- }
- $off += length($elements[$n + 1]);
-
-## print("n: <$n> GOOD: <$good>\n");
-
- $fixed_line = $fixed_line . $good;
- }
-
- if (($#elements % 2) == 0) {
- $fixed_line = $fixed_line . $fix_elements[$#elements];
- }
-
- if ($fix && $line_fixed && $fixed_line ne $fixed[$fixlinenr]) {
- $fixed[$fixlinenr] = $fixed_line;
- }
-
-
- }
-
-# check for whitespace before a non-naked semicolon
- if ($line =~ /^\+.*\S\s+;\s*$/) {
- if (WARN("SPACING",
- "space prohibited before semicolon\n" . $herecurr) &&
- $fix) {
- 1 while $fixed[$fixlinenr] =~
- s/^(\+.*\S)\s+;/$1;/;
- }
- }
-
-# check for multiple assignments
- if ($line =~ /^.\s*$Lval\s*=\s*$Lval\s*=(?!=)/) {
- CHK("MULTIPLE_ASSIGNMENTS",
- "multiple assignments should be avoided\n" . $herecurr);
- }
-
-## # check for multiple declarations, allowing for a function declaration
-## # continuation.
-## if ($line =~ /^.\s*$Type\s+$Ident(?:\s*=[^,{]*)?\s*,\s*$Ident.*/ &&
-## $line !~ /^.\s*$Type\s+$Ident(?:\s*=[^,{]*)?\s*,\s*$Type\s*$Ident.*/) {
-##
-## # Remove any bracketed sections to ensure we do not
-## # falsly report the parameters of functions.
-## my $ln = $line;
-## while ($ln =~ s/\([^\(\)]*\)//g) {
-## }
-## if ($ln =~ /,/) {
-## WARN("MULTIPLE_DECLARATION",
-## "declaring multiple variables together should be avoided\n" . $herecurr);
-## }
-## }
-
-#need space before brace following if, while, etc
- if (($line =~ /\(.*\)\{/ && $line !~ /\($Type\)\{/) ||
- $line =~ /do\{/) {
- if (ERROR("SPACING",
- "space required before the open brace '{'\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/^(\+.*(?:do|\))){/$1 {/;
- }
- }
-
-## # check for blank lines before declarations
-## if ($line =~ /^.\t+$Type\s+$Ident(?:\s*=.*)?;/ &&
-## $prevrawline =~ /^.\s*$/) {
-## WARN("SPACING",
-## "No blank lines before declarations\n" . $hereprev);
-## }
-##
-
-# closing brace should have a space following it when it has anything
-# on the line
- if ($line =~ /}(?!(?:,|;|\)))\S/) {
- if (ERROR("SPACING",
- "space required after that close brace '}'\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~
- s/}((?!(?:,|;|\)))\S)/} $1/;
- }
- }
-
-# check spacing on square brackets
- if ($line =~ /\[\s/ && $line !~ /\[\s*$/) {
- if (ERROR("SPACING",
- "space prohibited after that open square bracket '['\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~
- s/\[\s+/\[/;
- }
- }
- if ($line =~ /\s\]/) {
- if (ERROR("SPACING",
- "space prohibited before that close square bracket ']'\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~
- s/\s+\]/\]/;
- }
- }
-
-# check spacing on parentheses
- if ($line =~ /\(\s/ && $line !~ /\(\s*(?:\\)?$/ &&
- $line !~ /for\s*\(\s+;/) {
- if (ERROR("SPACING",
- "space prohibited after that open parenthesis '('\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~
- s/\(\s+/\(/;
- }
- }
- if ($line =~ /(\s+)\)/ && $line !~ /^.\s*\)/ &&
- $line !~ /for\s*\(.*;\s+\)/ &&
- $line !~ /:\s+\)/) {
- if (ERROR("SPACING",
- "space prohibited before that close parenthesis ')'\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~
- s/\s+\)/\)/;
- }
- }
-
-# check unnecessary parentheses around addressof/dereference single $Lvals
-# ie: &(foo->bar) should be &foo->bar and *(foo->bar) should be *foo->bar
-
- while ($line =~ /(?:[^&]&\s*|\*)\(\s*($Ident\s*(?:$Member\s*)+)\s*\)/g) {
- my $var = $1;
- if (CHK("UNNECESSARY_PARENTHESES",
- "Unnecessary parentheses around $var\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/\(\s*\Q$var\E\s*\)/$var/;
- }
- }
-
-# check for unnecessary parentheses around function pointer uses
-# ie: (foo->bar)(); should be foo->bar();
-# but not "if (foo->bar) (" to avoid some false positives
- if ($line =~ /(\bif\s*|)(\(\s*$Ident\s*(?:$Member\s*)+\))[ \t]*\(/ && $1 !~ /^if/) {
- my $var = $2;
- if (CHK("UNNECESSARY_PARENTHESES",
- "Unnecessary parentheses around function pointer $var\n" . $herecurr) &&
- $fix) {
- my $var2 = deparenthesize($var);
- $var2 =~ s/\s//g;
- $fixed[$fixlinenr] =~ s/\Q$var\E/$var2/;
- }
- }
-
-#goto labels aren't indented, allow a single space however
- if ($line=~/^.\s+[A-Za-z\d_]+:(?![0-9]+)/ and
- !($line=~/^. [A-Za-z\d_]+:/) and !($line=~/^.\s+default:/)) {
- if (WARN("INDENTED_LABEL",
- "labels should not be indented\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~
- s/^(.)\s+/$1/;
- }
- }
-
-# return is not a function
- if (defined($stat) && $stat =~ /^.\s*return(\s*)\(/s) {
- my $spacing = $1;
- if ($^V && $^V ge 5.10.0 &&
- $stat =~ /^.\s*return\s*($balanced_parens)\s*;\s*$/) {
- my $value = $1;
- $value = deparenthesize($value);
- if ($value =~ m/^\s*$FuncArg\s*(?:\?|$)/) {
- ERROR("RETURN_PARENTHESES",
- "return is not a function, parentheses are not required\n" . $herecurr);
- }
- } elsif ($spacing !~ /\s+/) {
- ERROR("SPACING",
- "space required before the open parenthesis '('\n" . $herecurr);
- }
- }
-
-# unnecessary return in a void function
-# at end-of-function, with the previous line a single leading tab, then return;
-# and the line before that not a goto label target like "out:"
- if ($sline =~ /^[ \+]}\s*$/ &&
- $prevline =~ /^\+\treturn\s*;\s*$/ &&
- $linenr >= 3 &&
- $lines[$linenr - 3] =~ /^[ +]/ &&
- $lines[$linenr - 3] !~ /^[ +]\s*$Ident\s*:/) {
- WARN("RETURN_VOID",
- "void function return statements are not generally useful\n" . $hereprev);
- }
-
-# if statements using unnecessary parentheses - ie: if ((foo == bar))
- if ($^V && $^V ge 5.10.0 &&
- $line =~ /\bif\s*((?:\(\s*){2,})/) {
- my $openparens = $1;
- my $count = $openparens =~ tr@\(@\(@;
- my $msg = "";
- if ($line =~ /\bif\s*(?:\(\s*){$count,$count}$LvalOrFunc\s*($Compare)\s*$LvalOrFunc(?:\s*\)){$count,$count}/) {
- my $comp = $4; #Not $1 because of $LvalOrFunc
- $msg = " - maybe == should be = ?" if ($comp eq "==");
- WARN("UNNECESSARY_PARENTHESES",
- "Unnecessary parentheses$msg\n" . $herecurr);
- }
- }
-
-# Return of what appears to be an errno should normally be -'ve
- if ($line =~ /^.\s*return\s*(E[A-Z]*)\s*;/) {
- my $name = $1;
- if ($name ne 'EOF' && $name ne 'ERROR') {
- WARN("USE_NEGATIVE_ERRNO",
- "return of an errno should typically be -ve (return -$1)\n" . $herecurr);
- }
- }
-
-# Need a space before open parenthesis after if, while etc
- if ($line =~ /\b(if|while|for|switch)\(/) {
- if (ERROR("SPACING",
- "space required before the open parenthesis '('\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~
- s/\b(if|while|for|switch)\(/$1 \(/;
- }
- }
-
-# Check for illegal assignment in if conditional -- and check for trailing
-# statements after the conditional.
- if ($line =~ /do\s*(?!{)/) {
- ($stat, $cond, $line_nr_next, $remain_next, $off_next) =
- ctx_statement_block($linenr, $realcnt, 0)
- if (!defined $stat);
- my ($stat_next) = ctx_statement_block($line_nr_next,
- $remain_next, $off_next);
- $stat_next =~ s/\n./\n /g;
- ##print "stat<$stat> stat_next<$stat_next>\n";
-
- if ($stat_next =~ /^\s*while\b/) {
- # If the statement carries leading newlines,
- # then count those as offsets.
- my ($whitespace) =
- ($stat_next =~ /^((?:\s*\n[+-])*\s*)/s);
- my $offset =
- statement_rawlines($whitespace) - 1;
-
- $suppress_whiletrailers{$line_nr_next +
- $offset} = 1;
- }
- }
- if (!defined $suppress_whiletrailers{$linenr} &&
- defined($stat) && defined($cond) &&
- $line =~ /\b(?:if|while|for)\s*\(/ && $line !~ /^.\s*#/) {
- my ($s, $c) = ($stat, $cond);
-
- if ($c =~ /\bif\s*\(.*[^<>!=]=[^=].*/s) {
- ERROR("ASSIGN_IN_IF",
- "do not use assignment in if condition\n" . $herecurr);
- }
-
- # Find out what is on the end of the line after the
- # conditional.
- substr($s, 0, length($c), '');
- $s =~ s/\n.*//g;
- $s =~ s/$;//g; # Remove any comments
- if (length($c) && $s !~ /^\s*{?\s*\\*\s*$/ &&
- $c !~ /}\s*while\s*/)
- {
- # Find out how long the conditional actually is.
- my @newlines = ($c =~ /\n/gs);
- my $cond_lines = 1 + $#newlines;
- my $stat_real = '';
-
- $stat_real = raw_line($linenr, $cond_lines)
- . "\n" if ($cond_lines);
- if (defined($stat_real) && $cond_lines > 1) {
- $stat_real = "[...]\n$stat_real";
- }
-
- ERROR("TRAILING_STATEMENTS",
- "trailing statements should be on next line\n" . $herecurr . $stat_real);
- }
- }
-
-# Check for bitwise tests written as boolean
- if ($line =~ /
- (?:
- (?:\[|\(|\&\&|\|\|)
- \s*0[xX][0-9]+\s*
- (?:\&\&|\|\|)
- |
- (?:\&\&|\|\|)
- \s*0[xX][0-9]+\s*
- (?:\&\&|\|\||\)|\])
- )/x)
- {
- WARN("HEXADECIMAL_BOOLEAN_TEST",
- "boolean test with hexadecimal, perhaps just 1 \& or \|?\n" . $herecurr);
- }
-
-# if and else should not have general statements after it
- if ($line =~ /^.\s*(?:}\s*)?else\b(.*)/) {
- my $s = $1;
- $s =~ s/$;//g; # Remove any comments
- if ($s !~ /^\s*(?:\sif|(?:{|)\s*\\?\s*$)/) {
- ERROR("TRAILING_STATEMENTS",
- "trailing statements should be on next line\n" . $herecurr);
- }
- }
-# if should not continue a brace
- if ($line =~ /}\s*if\b/) {
- ERROR("TRAILING_STATEMENTS",
- "trailing statements should be on next line (or did you mean 'else if'?)\n" .
- $herecurr);
- }
-# case and default should not have general statements after them
- if ($line =~ /^.\s*(?:case\s*.*|default\s*):/g &&
- $line !~ /\G(?:
- (?:\s*$;*)(?:\s*{)?(?:\s*$;*)(?:\s*\\)?\s*$|
- \s*return\s+
- )/xg)
- {
- ERROR("TRAILING_STATEMENTS",
- "trailing statements should be on next line\n" . $herecurr);
- }
-
- # Check for }<nl>else {, these must be at the same
- # indent level to be relevant to each other.
- if ($prevline=~/}\s*$/ and $line=~/^.\s*else\s*/ &&
- $previndent == $indent) {
- if (ERROR("ELSE_AFTER_BRACE",
- "else should follow close brace '}'\n" . $hereprev) &&
- $fix && $prevline =~ /^\+/ && $line =~ /^\+/) {
- fix_delete_line($fixlinenr - 1, $prevrawline);
- fix_delete_line($fixlinenr, $rawline);
- my $fixedline = $prevrawline;
- $fixedline =~ s/}\s*$//;
- if ($fixedline !~ /^\+\s*$/) {
- fix_insert_line($fixlinenr, $fixedline);
- }
- $fixedline = $rawline;
- $fixedline =~ s/^(.\s*)else/$1} else/;
- fix_insert_line($fixlinenr, $fixedline);
- }
- }
-
- if ($prevline=~/}\s*$/ and $line=~/^.\s*while\s*/ &&
- $previndent == $indent) {
- my ($s, $c) = ctx_statement_block($linenr, $realcnt, 0);
-
- # Find out what is on the end of the line after the
- # conditional.
- substr($s, 0, length($c), '');
- $s =~ s/\n.*//g;
-
- if ($s =~ /^\s*;/) {
- if (ERROR("WHILE_AFTER_BRACE",
- "while should follow close brace '}'\n" . $hereprev) &&
- $fix && $prevline =~ /^\+/ && $line =~ /^\+/) {
- fix_delete_line($fixlinenr - 1, $prevrawline);
- fix_delete_line($fixlinenr, $rawline);
- my $fixedline = $prevrawline;
- my $trailing = $rawline;
- $trailing =~ s/^\+//;
- $trailing = trim($trailing);
- $fixedline =~ s/}\s*$/} $trailing/;
- fix_insert_line($fixlinenr, $fixedline);
- }
- }
- }
-
-#Specific variable tests
- while ($line =~ m{($Constant|$Lval)}g) {
- my $var = $1;
-
-#gcc binary extension
- if ($var =~ /^$Binary$/) {
- if (WARN("GCC_BINARY_CONSTANT",
- "Avoid gcc v4.3+ binary constant extension: <$var>\n" . $herecurr) &&
- $fix) {
- my $hexval = sprintf("0x%x", oct($var));
- $fixed[$fixlinenr] =~
- s/\b$var\b/$hexval/;
- }
- }
-
-#CamelCase
- if ($var !~ /^$Constant$/ &&
- $var =~ /[A-Z][a-z]|[a-z][A-Z]/ &&
-#Ignore Page<foo> variants
- $var !~ /^(?:Clear|Set|TestClear|TestSet|)Page[A-Z]/ &&
-#Ignore SI style variants like nS, mV and dB (ie: max_uV, regulator_min_uA_show)
- $var !~ /^(?:[a-z_]*?)_?[a-z][A-Z](?:_[a-z_]+)?$/ &&
-#Ignore some three character SI units explicitly, like MiB and KHz
- $var !~ /^(?:[a-z_]*?)_?(?:[KMGT]iB|[KMGT]?Hz)(?:_[a-z_]+)?$/) {
- while ($var =~ m{($Ident)}g) {
- my $word = $1;
- next if ($word !~ /[A-Z][a-z]|[a-z][A-Z]/);
- if ($check) {
- seed_camelcase_includes();
- if (!$file && !$camelcase_file_seeded) {
- seed_camelcase_file($realfile);
- $camelcase_file_seeded = 1;
- }
- }
- if (!defined $camelcase{$word}) {
- $camelcase{$word} = 1;
- CHK("CAMELCASE",
- "Avoid CamelCase: <$word>\n" . $herecurr);
- }
- }
- }
- }
-
-#no spaces allowed after \ in define
- if ($line =~ /\#\s*define.*\\\s+$/) {
- if (WARN("WHITESPACE_AFTER_LINE_CONTINUATION",
- "Whitespace after \\ makes next lines useless\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/\s+$//;
- }
- }
-
-#warn if <asm/foo.h> is #included and <linux/foo.h> is available (uses RAW line)
- if ($tree && $rawline =~ m{^.\s*\#\s*include\s*\<asm\/(.*)\.h\>}) {
- my $file = "$1.h";
- my $checkfile = "include/linux/$file";
- if (-f "$root/$checkfile" &&
- $realfile ne $checkfile &&
- $1 !~ /$allowed_asm_includes/)
- {
- if ($realfile =~ m{^arch/}) {
- CHK("ARCH_INCLUDE_LINUX",
- "Consider using #include <linux/$file> instead of <asm/$file>\n" . $herecurr);
- } else {
- WARN("INCLUDE_LINUX",
- "Use #include <linux/$file> instead of <asm/$file>\n" . $herecurr);
- }
- }
- }
-
-# multi-statement macros should be enclosed in a do while loop, grab the
-# first statement and ensure its the whole macro if its not enclosed
-# in a known good container
- if ($realfile !~ m@/vmlinux.lds.h$@ &&
- $line =~ /^.\s*\#\s*define\s*$Ident(\()?/) {
- my $ln = $linenr;
- my $cnt = $realcnt;
- my ($off, $dstat, $dcond, $rest);
- my $ctx = '';
- my $has_flow_statement = 0;
- my $has_arg_concat = 0;
- ($dstat, $dcond, $ln, $cnt, $off) =
- ctx_statement_block($linenr, $realcnt, 0);
- $ctx = $dstat;
- #print "dstat<$dstat> dcond<$dcond> cnt<$cnt> off<$off>\n";
- #print "LINE<$lines[$ln-1]> len<" . length($lines[$ln-1]) . "\n";
-
- $has_flow_statement = 1 if ($ctx =~ /\b(goto|return)\b/);
- $has_arg_concat = 1 if ($ctx =~ /\#\#/);
-
- $dstat =~ s/^.\s*\#\s*define\s+$Ident(?:\([^\)]*\))?\s*//;
- $dstat =~ s/$;//g;
- $dstat =~ s/\\\n.//g;
- $dstat =~ s/^\s*//s;
- $dstat =~ s/\s*$//s;
-
- # Flatten any parentheses and braces
- while ($dstat =~ s/\([^\(\)]*\)/1/ ||
- $dstat =~ s/\{[^\{\}]*\}/1/ ||
- $dstat =~ s/\[[^\[\]]*\]/1/)
- {
- }
-
- # Flatten any obvious string concatentation.
- while ($dstat =~ s/("X*")\s*$Ident/$1/ ||
- $dstat =~ s/$Ident\s*("X*")/$1/)
- {
- }
-
- my $exceptions = qr{
- $Declare|
- module_param_named|
- MODULE_PARM_DESC|
- DECLARE_PER_CPU|
- DEFINE_PER_CPU|
- __typeof__\(|
- union|
- struct|
- \.$Ident\s*=\s*|
- ^\"|\"$
- }x;
- #print "REST<$rest> dstat<$dstat> ctx<$ctx>\n";
- if ($dstat ne '' &&
- $dstat !~ /^(?:$Ident|-?$Constant),$/ && # 10, // foo(),
- $dstat !~ /^(?:$Ident|-?$Constant);$/ && # foo();
- $dstat !~ /^[!~-]?(?:$Lval|$Constant)$/ && # 10 // foo() // !foo // ~foo // -foo // foo->bar // foo.bar->baz
- $dstat !~ /^'X'$/ && $dstat !~ /^'XX'$/ && # character constants
- $dstat !~ /$exceptions/ &&
- $dstat !~ /^\.$Ident\s*=/ && # .foo =
- $dstat !~ /^(?:\#\s*$Ident|\#\s*$Constant)\s*$/ && # stringification #foo
- $dstat !~ /^do\s*$Constant\s*while\s*$Constant;?$/ && # do {...} while (...); // do {...} while (...)
- $dstat !~ /^for\s*$Constant$/ && # for (...)
- $dstat !~ /^for\s*$Constant\s+(?:$Ident|-?$Constant)$/ && # for (...) bar()
- $dstat !~ /^do\s*\{/ && # do {...
- $dstat !~ /^\(\{/ && # ({...
- $ctx !~ /^.\s*#\s*define\s+TRACE_(?:SYSTEM|INCLUDE_FILE|INCLUDE_PATH)\b/)
- {
- $ctx =~ s/\n*$//;
- my $herectx = $here . "\n";
- my $cnt = statement_rawlines($ctx);
-
- for (my $n = 0; $n < $cnt; $n++) {
- $herectx .= raw_line($linenr, $n) . "\n";
- }
-
- if ($dstat =~ /;/) {
- ERROR("MULTISTATEMENT_MACRO_USE_DO_WHILE",
- "Macros with multiple statements should be enclosed in a do - while loop\n" . "$herectx");
- } else {
- ERROR("COMPLEX_MACRO",
- "Macros with complex values should be enclosed in parentheses\n" . "$herectx");
- }
- }
-
-# check for macros with flow control, but without ## concatenation
-# ## concatenation is commonly a macro that defines a function so ignore those
- if ($has_flow_statement && !$has_arg_concat) {
- my $herectx = $here . "\n";
- my $cnt = statement_rawlines($ctx);
-
- for (my $n = 0; $n < $cnt; $n++) {
- $herectx .= raw_line($linenr, $n) . "\n";
- }
- WARN("MACRO_WITH_FLOW_CONTROL",
- "Macros with flow control statements should be avoided\n" . "$herectx");
- }
-
-# check for line continuations outside of #defines, preprocessor #, and asm
-
- } else {
- if ($prevline !~ /^..*\\$/ &&
- $line !~ /^\+\s*\#.*\\$/ && # preprocessor
- $line !~ /^\+.*\b(__asm__|asm)\b.*\\$/ && # asm
- $line =~ /^\+.*\\$/) {
- WARN("LINE_CONTINUATIONS",
- "Avoid unnecessary line continuations\n" . $herecurr);
- }
- }
-
-# do {} while (0) macro tests:
-# single-statement macros do not need to be enclosed in do while (0) loop,
-# macro should not end with a semicolon
- if ($^V && $^V ge 5.10.0 &&
- $realfile !~ m@/vmlinux.lds.h$@ &&
- $line =~ /^.\s*\#\s*define\s+$Ident(\()?/) {
- my $ln = $linenr;
- my $cnt = $realcnt;
- my ($off, $dstat, $dcond, $rest);
- my $ctx = '';
- ($dstat, $dcond, $ln, $cnt, $off) =
- ctx_statement_block($linenr, $realcnt, 0);
- $ctx = $dstat;
-
- $dstat =~ s/\\\n.//g;
-
- if ($dstat =~ /^\+\s*#\s*define\s+$Ident\s*${balanced_parens}\s*do\s*{(.*)\s*}\s*while\s*\(\s*0\s*\)\s*([;\s]*)\s*$/) {
- my $stmts = $2;
- my $semis = $3;
-
- $ctx =~ s/\n*$//;
- my $cnt = statement_rawlines($ctx);
- my $herectx = $here . "\n";
-
- for (my $n = 0; $n < $cnt; $n++) {
- $herectx .= raw_line($linenr, $n) . "\n";
- }
-
- if (($stmts =~ tr/;/;/) == 1 &&
- $stmts !~ /^\s*(if|while|for|switch)\b/) {
- WARN("SINGLE_STATEMENT_DO_WHILE_MACRO",
- "Single statement macros should not use a do {} while (0) loop\n" . "$herectx");
- }
- if (defined $semis && $semis ne "") {
- WARN("DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON",
- "do {} while (0) macros should not be semicolon terminated\n" . "$herectx");
- }
- } elsif ($dstat =~ /^\+\s*#\s*define\s+$Ident.*;\s*$/) {
- $ctx =~ s/\n*$//;
- my $cnt = statement_rawlines($ctx);
- my $herectx = $here . "\n";
-
- for (my $n = 0; $n < $cnt; $n++) {
- $herectx .= raw_line($linenr, $n) . "\n";
- }
-
- WARN("TRAILING_SEMICOLON",
- "macros should not use a trailing semicolon\n" . "$herectx");
- }
- }
-
-# make sure symbols are always wrapped with VMLINUX_SYMBOL() ...
-# all assignments may have only one of the following with an assignment:
-# .
-# ALIGN(...)
-# VMLINUX_SYMBOL(...)
- if ($realfile eq 'vmlinux.lds.h' && $line =~ /(?:(?:^|\s)$Ident\s*=|=\s*$Ident(?:\s|$))/) {
- WARN("MISSING_VMLINUX_SYMBOL",
- "vmlinux.lds.h needs VMLINUX_SYMBOL() around C-visible symbols\n" . $herecurr);
- }
-
-# check for redundant bracing round if etc
- if ($line =~ /(^.*)\bif\b/ && $1 !~ /else\s*$/) {
- my ($level, $endln, @chunks) =
- ctx_statement_full($linenr, $realcnt, 1);
- #print "chunks<$#chunks> linenr<$linenr> endln<$endln> level<$level>\n";
- #print "APW: <<$chunks[1][0]>><<$chunks[1][1]>>\n";
- if ($#chunks > 0 && $level == 0) {
- my @allowed = ();
- my $allow = 0;
- my $seen = 0;
- my $herectx = $here . "\n";
- my $ln = $linenr - 1;
- for my $chunk (@chunks) {
- my ($cond, $block) = @{$chunk};
-
- # If the condition carries leading newlines, then count those as offsets.
- my ($whitespace) = ($cond =~ /^((?:\s*\n[+-])*\s*)/s);
- my $offset = statement_rawlines($whitespace) - 1;
-
- $allowed[$allow] = 0;
- #print "COND<$cond> whitespace<$whitespace> offset<$offset>\n";
-
- # We have looked at and allowed this specific line.
- $suppress_ifbraces{$ln + $offset} = 1;
-
- $herectx .= "$rawlines[$ln + $offset]\n[...]\n";
- $ln += statement_rawlines($block) - 1;
-
- substr($block, 0, length($cond), '');
-
- $seen++ if ($block =~ /^\s*{/);
-
- #print "cond<$cond> block<$block> allowed<$allowed[$allow]>\n";
- if (statement_lines($cond) > 1) {
- #print "APW: ALLOWED: cond<$cond>\n";
- $allowed[$allow] = 1;
- }
- if ($block =~/\b(?:if|for|while)\b/) {
- #print "APW: ALLOWED: block<$block>\n";
- $allowed[$allow] = 1;
- }
- if (statement_block_size($block) > 1) {
- #print "APW: ALLOWED: lines block<$block>\n";
- $allowed[$allow] = 1;
- }
- $allow++;
- }
- if ($seen) {
- my $sum_allowed = 0;
- foreach (@allowed) {
- $sum_allowed += $_;
- }
- if ($sum_allowed == 0) {
- WARN("BRACES",
- "braces {} are not necessary for any arm of this statement\n" . $herectx);
- } elsif ($sum_allowed != $allow &&
- $seen != $allow) {
- CHK("BRACES",
- "braces {} should be used on all arms of this statement\n" . $herectx);
- }
- }
- }
- }
- if (!defined $suppress_ifbraces{$linenr - 1} &&
- $line =~ /\b(if|while|for|else)\b/) {
- my $allowed = 0;
-
- # Check the pre-context.
- if (substr($line, 0, $-[0]) =~ /(\}\s*)$/) {
- #print "APW: ALLOWED: pre<$1>\n";
- $allowed = 1;
- }
-
- my ($level, $endln, @chunks) =
- ctx_statement_full($linenr, $realcnt, $-[0]);
-
- # Check the condition.
- my ($cond, $block) = @{$chunks[0]};
- #print "CHECKING<$linenr> cond<$cond> block<$block>\n";
- if (defined $cond) {
- substr($block, 0, length($cond), '');
- }
- if (statement_lines($cond) > 1) {
- #print "APW: ALLOWED: cond<$cond>\n";
- $allowed = 1;
- }
- if ($block =~/\b(?:if|for|while)\b/) {
- #print "APW: ALLOWED: block<$block>\n";
- $allowed = 1;
- }
- if (statement_block_size($block) > 1) {
- #print "APW: ALLOWED: lines block<$block>\n";
- $allowed = 1;
- }
- # Check the post-context.
- if (defined $chunks[1]) {
- my ($cond, $block) = @{$chunks[1]};
- if (defined $cond) {
- substr($block, 0, length($cond), '');
- }
- if ($block =~ /^\s*\{/) {
- #print "APW: ALLOWED: chunk-1 block<$block>\n";
- $allowed = 1;
- }
- }
- if ($level == 0 && $block =~ /^\s*\{/ && !$allowed) {
- my $herectx = $here . "\n";
- my $cnt = statement_rawlines($block);
-
- for (my $n = 0; $n < $cnt; $n++) {
- $herectx .= raw_line($linenr, $n) . "\n";
- }
-
- WARN("BRACES",
- "braces {} are not necessary for single statement blocks\n" . $herectx);
- }
- }
-
-# check for unnecessary blank lines around braces
- if (($line =~ /^.\s*}\s*$/ && $prevrawline =~ /^.\s*$/)) {
- CHK("BRACES",
- "Blank lines aren't necessary before a close brace '}'\n" . $hereprev);
- }
- if (($rawline =~ /^.\s*$/ && $prevline =~ /^..*{\s*$/)) {
- CHK("BRACES",
- "Blank lines aren't necessary after an open brace '{'\n" . $hereprev);
- }
-
-# no volatiles please
- my $asm_volatile = qr{\b(__asm__|asm)\s+(__volatile__|volatile)\b};
- if ($line =~ /\bvolatile\b/ && $line !~ /$asm_volatile/) {
- WARN("VOLATILE",
- "Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt\n" . $herecurr);
- }
-
-# Check for user-visible strings broken across lines, which breaks the ability
-# to grep for the string. Make exceptions when the previous string ends in a
-# newline (multiple lines in one string constant) or '\t', '\r', ';', or '{'
-# (common in inline assembly) or is a octal \123 or hexadecimal \xaf value
- if ($line =~ /^\+\s*"[X\t]*"/ &&
- $prevline =~ /"\s*$/ &&
- $prevrawline !~ /(?:\\(?:[ntr]|[0-7]{1,3}|x[0-9a-fA-F]{1,2})|;\s*|\{\s*)"\s*$/) {
- if (WARN("SPLIT_STRING",
- "quoted string split across lines\n" . $hereprev) &&
- $fix &&
- $prevrawline =~ /^\+.*"\s*$/ &&
- $last_coalesced_string_linenr != $linenr - 1) {
- my $extracted_string = get_quoted_string($line, $rawline);
- my $comma_close = "";
- if ($rawline =~ /\Q$extracted_string\E(\s*\)\s*;\s*$|\s*,\s*)/) {
- $comma_close = $1;
- }
-
- fix_delete_line($fixlinenr - 1, $prevrawline);
- fix_delete_line($fixlinenr, $rawline);
- my $fixedline = $prevrawline;
- $fixedline =~ s/"\s*$//;
- $fixedline .= substr($extracted_string, 1) . trim($comma_close);
- fix_insert_line($fixlinenr - 1, $fixedline);
- $fixedline = $rawline;
- $fixedline =~ s/\Q$extracted_string\E\Q$comma_close\E//;
- if ($fixedline !~ /\+\s*$/) {
- fix_insert_line($fixlinenr, $fixedline);
- }
- $last_coalesced_string_linenr = $linenr;
- }
- }
-
-# check for missing a space in a string concatenation
- if ($prevrawline =~ /[^\\]\w"$/ && $rawline =~ /^\+[\t ]+"\w/) {
- WARN('MISSING_SPACE',
- "break quoted strings at a space character\n" . $hereprev);
- }
-
-# check for spaces before a quoted newline
- if ($rawline =~ /^.*\".*\s\\n/) {
- if (WARN("QUOTED_WHITESPACE_BEFORE_NEWLINE",
- "unnecessary whitespace before a quoted newline\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/^(\+.*\".*)\s+\\n/$1\\n/;
- }
-
- }
-
-# concatenated string without spaces between elements
- if ($line =~ /"X+"[A-Z_]+/ || $line =~ /[A-Z_]+"X+"/) {
- CHK("CONCATENATED_STRING",
- "Concatenated strings should use spaces between elements\n" . $herecurr);
- }
-
-# uncoalesced string fragments
- if ($line =~ /"X*"\s*"/) {
- WARN("STRING_FRAGMENTS",
- "Consecutive strings are generally better as a single string\n" . $herecurr);
- }
-
-# check for %L{u,d,i} in strings
- my $string;
- while ($line =~ /(?:^|")([X\t]*)(?:"|$)/g) {
- $string = substr($rawline, $-[1], $+[1] - $-[1]);
- $string =~ s/%%/__/g;
- if ($string =~ /(?<!%)%L[udi]/) {
- WARN("PRINTF_L",
- "\%Ld/%Lu are not-standard C, use %lld/%llu\n" . $herecurr);
- last;
- }
- }
-
-# check for line continuations in quoted strings with odd counts of "
- if ($rawline =~ /\\$/ && $rawline =~ tr/"/"/ % 2) {
- WARN("LINE_CONTINUATIONS",
- "Avoid line continuations in quoted strings\n" . $herecurr);
- }
-
-# warn about #if 0
- if ($line =~ /^.\s*\#\s*if\s+0\b/) {
- CHK("REDUNDANT_CODE",
- "if this code is redundant consider removing it\n" .
- $herecurr);
- }
-
-# check for needless "if (<foo>) fn(<foo>)" uses
- if ($prevline =~ /\bif\s*\(\s*($Lval)\s*\)/) {
- my $expr = '\s*\(\s*' . quotemeta($1) . '\s*\)\s*;';
- if ($line =~ /\b(kfree|usb_free_urb|debugfs_remove(?:_recursive)?)$expr/) {
- WARN('NEEDLESS_IF',
- "$1(NULL) is safe and this check is probably not required\n" . $hereprev);
- }
- }
-
-# check for unnecessary "Out of Memory" messages
- if ($line =~ /^\+.*\b$logFunctions\s*\(/ &&
- $prevline =~ /^[ \+]\s*if\s*\(\s*(\!\s*|NULL\s*==\s*)?($Lval)(\s*==\s*NULL\s*)?\s*\)/ &&
- (defined $1 || defined $3) &&
- $linenr > 3) {
- my $testval = $2;
- my $testline = $lines[$linenr - 3];
-
- my ($s, $c) = ctx_statement_block($linenr - 3, $realcnt, 0);
-# print("line: <$line>\nprevline: <$prevline>\ns: <$s>\nc: <$c>\n\n\n");
-
- if ($c =~ /(?:^|\n)[ \+]\s*(?:$Type\s*)?\Q$testval\E\s*=\s*(?:\([^\)]*\)\s*)?\s*(?:devm_)?(?:[kv][czm]alloc(?:_node|_array)?\b|kstrdup|(?:dev_)?alloc_skb)/) {
- WARN("OOM_MESSAGE",
- "Possible unnecessary 'out of memory' message\n" . $hereprev);
- }
- }
-
-# check for logging functions with KERN_<LEVEL>
- if ($line !~ /printk\s*\(/ &&
- $line =~ /\b$logFunctions\s*\(.*\b(KERN_[A-Z]+)\b/) {
- my $level = $1;
- if (WARN("UNNECESSARY_KERN_LEVEL",
- "Possible unnecessary $level\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/\s*$level\s*//;
- }
- }
-
-# check for mask then right shift without a parentheses
- if ($^V && $^V ge 5.10.0 &&
- $line =~ /$LvalOrFunc\s*\&\s*($LvalOrFunc)\s*>>/ &&
- $4 !~ /^\&/) { # $LvalOrFunc may be &foo, ignore if so
- WARN("MASK_THEN_SHIFT",
- "Possible precedence defect with mask then right shift - may need parentheses\n" . $herecurr);
- }
-
-# check for pointer comparisons to NULL
- if ($^V && $^V ge 5.10.0) {
- while ($line =~ /\b$LvalOrFunc\s*(==|\!=)\s*NULL\b/g) {
- my $val = $1;
- my $equal = "!";
- $equal = "" if ($4 eq "!=");
- if (CHK("COMPARISON_TO_NULL",
- "Comparison to NULL could be written \"${equal}${val}\"\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/\b\Q$val\E\s*(?:==|\!=)\s*NULL\b/$equal$val/;
- }
- }
- }
-
-# check for bad placement of section $InitAttribute (e.g.: __initdata)
- if ($line =~ /(\b$InitAttribute\b)/) {
- my $attr = $1;
- if ($line =~ /^\+\s*static\s+(?:const\s+)?(?:$attr\s+)?($NonptrTypeWithAttr)\s+(?:$attr\s+)?($Ident(?:\[[^]]*\])?)\s*[=;]/) {
- my $ptr = $1;
- my $var = $2;
- if ((($ptr =~ /\b(union|struct)\s+$attr\b/ &&
- ERROR("MISPLACED_INIT",
- "$attr should be placed after $var\n" . $herecurr)) ||
- ($ptr !~ /\b(union|struct)\s+$attr\b/ &&
- WARN("MISPLACED_INIT",
- "$attr should be placed after $var\n" . $herecurr))) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/(\bstatic\s+(?:const\s+)?)(?:$attr\s+)?($NonptrTypeWithAttr)\s+(?:$attr\s+)?($Ident(?:\[[^]]*\])?)\s*([=;])\s*/"$1" . trim(string_find_replace($2, "\\s*$attr\\s*", " ")) . " " . trim(string_find_replace($3, "\\s*$attr\\s*", "")) . " $attr" . ("$4" eq ";" ? ";" : " = ")/e;
- }
- }
- }
-
-# check for $InitAttributeData (ie: __initdata) with const
- if ($line =~ /\bconst\b/ && $line =~ /($InitAttributeData)/) {
- my $attr = $1;
- $attr =~ /($InitAttributePrefix)(.*)/;
- my $attr_prefix = $1;
- my $attr_type = $2;
- if (ERROR("INIT_ATTRIBUTE",
- "Use of const init definition must use ${attr_prefix}initconst\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~
- s/$InitAttributeData/${attr_prefix}initconst/;
- }
- }
-
-# check for $InitAttributeConst (ie: __initconst) without const
- if ($line !~ /\bconst\b/ && $line =~ /($InitAttributeConst)/) {
- my $attr = $1;
- if (ERROR("INIT_ATTRIBUTE",
- "Use of $attr requires a separate use of const\n" . $herecurr) &&
- $fix) {
- my $lead = $fixed[$fixlinenr] =~
- /(^\+\s*(?:static\s+))/;
- $lead = rtrim($1);
- $lead = "$lead " if ($lead !~ /^\+$/);
- $lead = "${lead}const ";
- $fixed[$fixlinenr] =~ s/(^\+\s*(?:static\s+))/$lead/;
- }
- }
-
-# don't use __constant_<foo> functions outside of include/uapi/
- if ($realfile !~ m@^include/uapi/@ &&
- $line =~ /(__constant_(?:htons|ntohs|[bl]e(?:16|32|64)_to_cpu|cpu_to_[bl]e(?:16|32|64)))\s*\(/) {
- my $constant_func = $1;
- my $func = $constant_func;
- $func =~ s/^__constant_//;
- if (WARN("CONSTANT_CONVERSION",
- "$constant_func should be $func\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/\b$constant_func\b/$func/g;
- }
- }
-
-# prefer usleep_range over udelay
- if ($line =~ /\budelay\s*\(\s*(\d+)\s*\)/) {
- my $delay = $1;
- # ignore udelay's < 10, however
- if (! ($delay < 10) ) {
- CHK("USLEEP_RANGE",
- "usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt\n" . $herecurr);
- }
- if ($delay > 2000) {
- WARN("LONG_UDELAY",
- "long udelay - prefer mdelay; see arch/arm/include/asm/delay.h\n" . $herecurr);
- }
- }
-
-# warn about unexpectedly long msleep's
- if ($line =~ /\bmsleep\s*\((\d+)\);/) {
- if ($1 < 20) {
- WARN("MSLEEP",
- "msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt\n" . $herecurr);
- }
- }
-
-# check for comparisons of jiffies
- if ($line =~ /\bjiffies\s*$Compare|$Compare\s*jiffies\b/) {
- WARN("JIFFIES_COMPARISON",
- "Comparing jiffies is almost always wrong; prefer time_after, time_before and friends\n" . $herecurr);
- }
-
-# check for comparisons of get_jiffies_64()
- if ($line =~ /\bget_jiffies_64\s*\(\s*\)\s*$Compare|$Compare\s*get_jiffies_64\s*\(\s*\)/) {
- WARN("JIFFIES_COMPARISON",
- "Comparing get_jiffies_64() is almost always wrong; prefer time_after64, time_before64 and friends\n" . $herecurr);
- }
-
-# warn about #ifdefs in C files
-# if ($line =~ /^.\s*\#\s*if(|n)def/ && ($realfile =~ /\.c$/)) {
-# print "#ifdef in C files should be avoided\n";
-# print "$herecurr";
-# $clean = 0;
-# }
-
-# warn about spacing in #ifdefs
- if ($line =~ /^.\s*\#\s*(ifdef|ifndef|elif)\s\s+/) {
- if (ERROR("SPACING",
- "exactly one space required after that #$1\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~
- s/^(.\s*\#\s*(ifdef|ifndef|elif))\s{2,}/$1 /;
- }
-
- }
-
-# check for spinlock_t definitions without a comment.
- if ($line =~ /^.\s*(struct\s+mutex|spinlock_t)\s+\S+;/ ||
- $line =~ /^.\s*(DEFINE_MUTEX)\s*\(/) {
- my $which = $1;
- if (!ctx_has_comment($first_line, $linenr)) {
- CHK("UNCOMMENTED_DEFINITION",
- "$1 definition without comment\n" . $herecurr);
- }
- }
-# check for memory barriers without a comment.
- if ($line =~ /\b(mb|rmb|wmb|read_barrier_depends|smp_mb|smp_rmb|smp_wmb|smp_read_barrier_depends)\(/) {
- if (!ctx_has_comment($first_line, $linenr)) {
- WARN("MEMORY_BARRIER",
- "memory barrier without comment\n" . $herecurr);
- }
- }
-# check of hardware specific defines
- if ($line =~ m@^.\s*\#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m at include/asm-@) {
- CHK("ARCH_DEFINES",
- "architecture specific defines should be avoided\n" . $herecurr);
- }
-
-# Check that the storage class is at the beginning of a declaration
- if ($line =~ /\b$Storage\b/ && $line !~ /^.\s*$Storage\b/) {
- WARN("STORAGE_CLASS",
- "storage class should be at the beginning of the declaration\n" . $herecurr)
- }
-
-# check the location of the inline attribute, that it is between
-# storage class and type.
- if ($line =~ /\b$Type\s+$Inline\b/ ||
- $line =~ /\b$Inline\s+$Storage\b/) {
- ERROR("INLINE_LOCATION",
- "inline keyword should sit between storage class and type\n" . $herecurr);
- }
-
-# Check for __inline__ and __inline, prefer inline
- if ($realfile !~ m@\binclude/uapi/@ &&
- $line =~ /\b(__inline__|__inline)\b/) {
- if (WARN("INLINE",
- "plain inline is preferred over $1\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/\b(__inline__|__inline)\b/inline/;
-
- }
- }
-
-# Check for __attribute__ packed, prefer __packed
- if ($realfile !~ m@\binclude/uapi/@ &&
- $line =~ /\b__attribute__\s*\(\s*\(.*\bpacked\b/) {
- WARN("PREFER_PACKED",
- "__packed is preferred over __attribute__((packed))\n" . $herecurr);
- }
-
-# Check for __attribute__ aligned, prefer __aligned
- if ($realfile !~ m@\binclude/uapi/@ &&
- $line =~ /\b__attribute__\s*\(\s*\(.*aligned/) {
- WARN("PREFER_ALIGNED",
- "__aligned(size) is preferred over __attribute__((aligned(size)))\n" . $herecurr);
- }
-
-# Check for __attribute__ format(printf, prefer __printf
- if ($realfile !~ m@\binclude/uapi/@ &&
- $line =~ /\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf/) {
- if (WARN("PREFER_PRINTF",
- "__printf(string-index, first-to-check) is preferred over __attribute__((format(printf, string-index, first-to-check)))\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.*)\)\s*\)\s*\)/"__printf(" . trim($1) . ")"/ex;
-
- }
- }
-
-# Check for __attribute__ format(scanf, prefer __scanf
- if ($realfile !~ m@\binclude/uapi/@ &&
- $line =~ /\b__attribute__\s*\(\s*\(\s*format\s*\(\s*scanf\b/) {
- if (WARN("PREFER_SCANF",
- "__scanf(string-index, first-to-check) is preferred over __attribute__((format(scanf, string-index, first-to-check)))\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*scanf\s*,\s*(.*)\)\s*\)\s*\)/"__scanf(" . trim($1) . ")"/ex;
- }
- }
-
-# Check for __attribute__ weak, or __weak declarations (may have link issues)
- if ($^V && $^V ge 5.10.0 &&
- $line =~ /(?:$Declare|$DeclareMisordered)\s*$Ident\s*$balanced_parens\s*(?:$Attribute)?\s*;/ &&
- ($line =~ /\b__attribute__\s*\(\s*\(.*\bweak\b/ ||
- $line =~ /\b__weak\b/)) {
- ERROR("WEAK_DECLARATION",
- "Using weak declarations can have unintended link defects\n" . $herecurr);
- }
-
-# check for sizeof(&)
- if ($line =~ /\bsizeof\s*\(\s*\&/) {
- WARN("SIZEOF_ADDRESS",
- "sizeof(& should be avoided\n" . $herecurr);
- }
-
-# check for sizeof without parenthesis
- if ($line =~ /\bsizeof\s+((?:\*\s*|)$Lval|$Type(?:\s+$Lval|))/) {
- if (WARN("SIZEOF_PARENTHESIS",
- "sizeof $1 should be sizeof($1)\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/\bsizeof\s+((?:\*\s*|)$Lval|$Type(?:\s+$Lval|))/"sizeof(" . trim($1) . ")"/ex;
- }
- }
-
-# check for struct spinlock declarations
- if ($line =~ /^.\s*\bstruct\s+spinlock\s+\w+\s*;/) {
- WARN("USE_SPINLOCK_T",
- "struct spinlock should be spinlock_t\n" . $herecurr);
- }
-
-# check for seq_printf uses that could be seq_puts
- if ($sline =~ /\bseq_printf\s*\(.*"\s*\)\s*;\s*$/) {
- my $fmt = get_quoted_string($line, $rawline);
- if ($fmt ne "" && $fmt !~ /[^\\]\%/) {
- if (WARN("PREFER_SEQ_PUTS",
- "Prefer seq_puts to seq_printf\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/\bseq_printf\b/seq_puts/;
- }
- }
- }
-
-# Check for misused memsets
- if ($^V && $^V ge 5.10.0 &&
- defined $stat &&
- $stat =~ /^\+(?:.*?)\bmemset\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\,\s*$FuncArg\s*\)/s) {
-
- my $ms_addr = $2;
- my $ms_val = $7;
- my $ms_size = $12;
-
- if ($ms_size =~ /^(0x|)0$/i) {
- ERROR("MEMSET",
- "memset to 0's uses 0 as the 2nd argument, not the 3rd\n" . "$here\n$stat\n");
- } elsif ($ms_size =~ /^(0x|)1$/i) {
- WARN("MEMSET",
- "single byte memset is suspicious. Swapped 2nd/3rd argument?\n" . "$here\n$stat\n");
- }
- }
-
-# Check for memcpy(foo, bar, ETH_ALEN) that could be ether_addr_copy(foo, bar)
- if ($^V && $^V ge 5.10.0 &&
- $line =~ /^\+(?:.*?)\bmemcpy\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\,\s*ETH_ALEN\s*\)/s) {
- if (WARN("PREFER_ETHER_ADDR_COPY",
- "Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2)\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/\bmemcpy\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\,\s*ETH_ALEN\s*\)/ether_addr_copy($2, $7)/;
- }
- }
-
-# typecasts on min/max could be min_t/max_t
- if ($^V && $^V ge 5.10.0 &&
- defined $stat &&
- $stat =~ /^\+(?:.*?)\b(min|max)\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\)/) {
- if (defined $2 || defined $7) {
- my $call = $1;
- my $cast1 = deparenthesize($2);
- my $arg1 = $3;
- my $cast2 = deparenthesize($7);
- my $arg2 = $8;
- my $cast;
-
- if ($cast1 ne "" && $cast2 ne "" && $cast1 ne $cast2) {
- $cast = "$cast1 or $cast2";
- } elsif ($cast1 ne "") {
- $cast = $cast1;
- } else {
- $cast = $cast2;
- }
- WARN("MINMAX",
- "$call() should probably be ${call}_t($cast, $arg1, $arg2)\n" . "$here\n$stat\n");
- }
- }
-
-# check usleep_range arguments
- if ($^V && $^V ge 5.10.0 &&
- defined $stat &&
- $stat =~ /^\+(?:.*?)\busleep_range\s*\(\s*($FuncArg)\s*,\s*($FuncArg)\s*\)/) {
- my $min = $1;
- my $max = $7;
- if ($min eq $max) {
- WARN("USLEEP_RANGE",
- "usleep_range should not use min == max args; see Documentation/timers/timers-howto.txt\n" . "$here\n$stat\n");
- } elsif ($min =~ /^\d+$/ && $max =~ /^\d+$/ &&
- $min > $max) {
- WARN("USLEEP_RANGE",
- "usleep_range args reversed, use min then max; see Documentation/timers/timers-howto.txt\n" . "$here\n$stat\n");
- }
- }
-
-# check for naked sscanf
- if ($^V && $^V ge 5.10.0 &&
- defined $stat &&
- $line =~ /\bsscanf\b/ &&
- ($stat !~ /$Ident\s*=\s*sscanf\s*$balanced_parens/ &&
- $stat !~ /\bsscanf\s*$balanced_parens\s*(?:$Compare)/ &&
- $stat !~ /(?:$Compare)\s*\bsscanf\s*$balanced_parens/)) {
- my $lc = $stat =~ tr@\n@@;
- $lc = $lc + $linenr;
- my $stat_real = raw_line($linenr, 0);
- for (my $count = $linenr + 1; $count <= $lc; $count++) {
- $stat_real = $stat_real . "\n" . raw_line($count, 0);
- }
- WARN("NAKED_SSCANF",
- "unchecked sscanf return value\n" . "$here\n$stat_real\n");
- }
-
-# check for simple sscanf that should be kstrto<foo>
- if ($^V && $^V ge 5.10.0 &&
- defined $stat &&
- $line =~ /\bsscanf\b/) {
- my $lc = $stat =~ tr@\n@@;
- $lc = $lc + $linenr;
- my $stat_real = raw_line($linenr, 0);
- for (my $count = $linenr + 1; $count <= $lc; $count++) {
- $stat_real = $stat_real . "\n" . raw_line($count, 0);
- }
- if ($stat_real =~ /\bsscanf\b\s*\(\s*$FuncArg\s*,\s*("[^"]+")/) {
- my $format = $6;
- my $count = $format =~ tr@%@%@;
- if ($count == 1 &&
- $format =~ /^"\%(?i:ll[udxi]|[udxi]ll|ll|[hl]h?[udxi]|[udxi][hl]h?|[hl]h?|[udxi])"$/) {
- WARN("SSCANF_TO_KSTRTO",
- "Prefer kstrto<type> to single variable sscanf\n" . "$here\n$stat_real\n");
- }
- }
- }
-
-# check for new externs in .h files.
- if ($realfile =~ /\.h$/ &&
- $line =~ /^\+\s*(extern\s+)$Type\s*$Ident\s*\(/s) {
- if (CHK("AVOID_EXTERNS",
- "extern prototypes should be avoided in .h files\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/(.*)\bextern\b\s*(.*)/$1$2/;
- }
- }
-
-# check for new externs in .c files.
- if ($realfile =~ /\.c$/ && defined $stat &&
- $stat =~ /^.\s*(?:extern\s+)?$Type\s+($Ident)(\s*)\(/s)
- {
- my $function_name = $1;
- my $paren_space = $2;
-
- my $s = $stat;
- if (defined $cond) {
- substr($s, 0, length($cond), '');
- }
- if ($s =~ /^\s*;/ &&
- $function_name ne 'uninitialized_var')
- {
- WARN("AVOID_EXTERNS",
- "externs should be avoided in .c files\n" . $herecurr);
- }
-
- if ($paren_space =~ /\n/) {
- WARN("FUNCTION_ARGUMENTS",
- "arguments for function declarations should follow identifier\n" . $herecurr);
- }
-
- } elsif ($realfile =~ /\.c$/ && defined $stat &&
- $stat =~ /^.\s*extern\s+/)
- {
- WARN("AVOID_EXTERNS",
- "externs should be avoided in .c files\n" . $herecurr);
- }
-
-# checks for new __setup's
- if ($rawline =~ /\b__setup\("([^"]*)"/) {
- my $name = $1;
-
- if (!grep(/$name/, @setup_docs)) {
- CHK("UNDOCUMENTED_SETUP",
- "__setup appears un-documented -- check Documentation/kernel-parameters.txt\n" . $herecurr);
- }
- }
-
-# check for pointless casting of kmalloc return
- if ($line =~ /\*\s*\)\s*[kv][czm]alloc(_node){0,1}\b/) {
- WARN("UNNECESSARY_CASTS",
- "unnecessary cast may hide bugs, see http://c-faq.com/malloc/mallocnocast.html\n" . $herecurr);
- }
-
-# alloc style
-# p = alloc(sizeof(struct foo), ...) should be p = alloc(sizeof(*p), ...)
- if ($^V && $^V ge 5.10.0 &&
- $line =~ /\b($Lval)\s*\=\s*(?:$balanced_parens)?\s*([kv][mz]alloc(?:_node)?)\s*\(\s*(sizeof\s*\(\s*struct\s+$Lval\s*\))/) {
- CHK("ALLOC_SIZEOF_STRUCT",
- "Prefer $3(sizeof(*$1)...) over $3($4...)\n" . $herecurr);
- }
-
-# check for k[mz]alloc with multiplies that could be kmalloc_array/kcalloc
- if ($^V && $^V ge 5.10.0 &&
- $line =~ /\b($Lval)\s*\=\s*(?:$balanced_parens)?\s*(k[mz]alloc)\s*\(\s*($FuncArg)\s*\*\s*($FuncArg)\s*,/) {
- my $oldfunc = $3;
- my $a1 = $4;
- my $a2 = $10;
- my $newfunc = "kmalloc_array";
- $newfunc = "kcalloc" if ($oldfunc eq "kzalloc");
- my $r1 = $a1;
- my $r2 = $a2;
- if ($a1 =~ /^sizeof\s*\S/) {
- $r1 = $a2;
- $r2 = $a1;
- }
- if ($r1 !~ /^sizeof\b/ && $r2 =~ /^sizeof\s*\S/ &&
- !($r1 =~ /^$Constant$/ || $r1 =~ /^[A-Z_][A-Z0-9_]*$/)) {
- if (WARN("ALLOC_WITH_MULTIPLY",
- "Prefer $newfunc over $oldfunc with multiply\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/\b($Lval)\s*\=\s*(?:$balanced_parens)?\s*(k[mz]alloc)\s*\(\s*($FuncArg)\s*\*\s*($FuncArg)/$1 . ' = ' . "$newfunc(" . trim($r1) . ', ' . trim($r2)/e;
-
- }
- }
- }
-
-# check for krealloc arg reuse
- if ($^V && $^V ge 5.10.0 &&
- $line =~ /\b($Lval)\s*\=\s*(?:$balanced_parens)?\s*krealloc\s*\(\s*\1\s*,/) {
- WARN("KREALLOC_ARG_REUSE",
- "Reusing the krealloc arg is almost always a bug\n" . $herecurr);
- }
-
-# check for alloc argument mismatch
- if ($line =~ /\b(kcalloc|kmalloc_array)\s*\(\s*sizeof\b/) {
- WARN("ALLOC_ARRAY_ARGS",
- "$1 uses number as first arg, sizeof is generally wrong\n" . $herecurr);
- }
-
-# check for multiple semicolons
- if ($line =~ /;\s*;\s*$/) {
- if (WARN("ONE_SEMICOLON",
- "Statements terminations use 1 semicolon\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/(\s*;\s*){2,}$/;/g;
- }
- }
-
-# check for #defines like: 1 << <digit> that could be BIT(digit)
- if ($line =~ /#\s*define\s+\w+\s+\(?\s*1\s*([ulUL]*)\s*\<\<\s*(?:\d+|$Ident)\s*\)?/) {
- my $ull = "";
- $ull = "_ULL" if (defined($1) && $1 =~ /ll/i);
- if (CHK("BIT_MACRO",
- "Prefer using the BIT$ull macro\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/\(?\s*1\s*[ulUL]*\s*<<\s*(\d+|$Ident)\s*\)?/BIT${ull}($1)/;
- }
- }
-
-# check for case / default statements not preceded by break/fallthrough/switch
- if ($line =~ /^.\s*(?:case\s+(?:$Ident|$Constant)\s*|default):/) {
- my $has_break = 0;
- my $has_statement = 0;
- my $count = 0;
- my $prevline = $linenr;
- while ($prevline > 1 && ($file || $count < 3) && !$has_break) {
- $prevline--;
- my $rline = $rawlines[$prevline - 1];
- my $fline = $lines[$prevline - 1];
- last if ($fline =~ /^\@\@/);
- next if ($fline =~ /^\-/);
- next if ($fline =~ /^.(?:\s*(?:case\s+(?:$Ident|$Constant)[\s$;]*|default):[\s$;]*)*$/);
- $has_break = 1 if ($rline =~ /fall[\s_-]*(through|thru)/i);
- next if ($fline =~ /^.[\s$;]*$/);
- $has_statement = 1;
- $count++;
- $has_break = 1 if ($fline =~ /\bswitch\b|\b(?:break\s*;[\s$;]*$|return\b|goto\b|continue\b)/);
- }
- if (!$has_break && $has_statement) {
- WARN("MISSING_BREAK",
- "Possible switch case/default not preceeded by break or fallthrough comment\n" . $herecurr);
- }
- }
-
-# check for switch/default statements without a break;
- if ($^V && $^V ge 5.10.0 &&
- defined $stat &&
- $stat =~ /^\+[$;\s]*(?:case[$;\s]+\w+[$;\s]*:[$;\s]*|)*[$;\s]*\bdefault[$;\s]*:[$;\s]*;/g) {
- my $ctx = '';
- my $herectx = $here . "\n";
- my $cnt = statement_rawlines($stat);
- for (my $n = 0; $n < $cnt; $n++) {
- $herectx .= raw_line($linenr, $n) . "\n";
- }
- WARN("DEFAULT_NO_BREAK",
- "switch default: should use break\n" . $herectx);
- }
-
-# check for gcc specific __FUNCTION__
- if ($line =~ /\b__FUNCTION__\b/) {
- if (WARN("USE_FUNC",
- "__func__ should be used instead of gcc specific __FUNCTION__\n" . $herecurr) &&
- $fix) {
- $fixed[$fixlinenr] =~ s/\b__FUNCTION__\b/__func__/g;
- }
- }
-
-# check for use of yield()
- if ($line =~ /\byield\s*\(\s*\)/) {
- WARN("YIELD",
- "Using yield() is generally wrong. See yield() kernel-doc (sched/core.c)\n" . $herecurr);
- }
-
-# check for comparisons against true and false
- if ($line =~ /\+\s*(.*?)\b(true|false|$Lval)\s*(==|\!=)\s*(true|false|$Lval)\b(.*)$/i) {
- my $lead = $1;
- my $arg = $2;
- my $test = $3;
- my $otype = $4;
- my $trail = $5;
- my $op = "!";
-
- ($arg, $otype) = ($otype, $arg) if ($arg =~ /^(?:true|false)$/i);
-
- my $type = lc($otype);
- if ($type =~ /^(?:true|false)$/) {
- if (("$test" eq "==" && "$type" eq "true") ||
- ("$test" eq "!=" && "$type" eq "false")) {
- $op = "";
- }
-
- CHK("BOOL_COMPARISON",
- "Using comparison to $otype is error prone\n" . $herecurr);
-
-## maybe suggesting a correct construct would better
-## "Using comparison to $otype is error prone. Perhaps use '${lead}${op}${arg}${trail}'\n" . $herecurr);
-
- }
- }
-
-# check for semaphores initialized locked
- if ($line =~ /^.\s*sema_init.+,\W?0\W?\)/) {
- WARN("CONSIDER_COMPLETION",
- "consider using a completion\n" . $herecurr);
- }
-
-# recommend kstrto* over simple_strto* and strict_strto*
- if ($line =~ /\b((simple|strict)_(strto(l|ll|ul|ull)))\s*\(/) {
- WARN("CONSIDER_KSTRTO",
- "$1 is obsolete, use k$3 instead\n" . $herecurr);
- }
-
-# check for __initcall(), use device_initcall() explicitly or more appropriate function please
- if ($line =~ /^.\s*__initcall\s*\(/) {
- WARN("USE_DEVICE_INITCALL",
- "please use device_initcall() or more appropriate function instead of __initcall() (see include/linux/init.h)\n" . $herecurr);
- }
-
-# check for various ops structs, ensure they are const.
- my $struct_ops = qr{acpi_dock_ops|
- address_space_operations|
- backlight_ops|
- block_device_operations|
- dentry_operations|
- dev_pm_ops|
- dma_map_ops|
- extent_io_ops|
- file_lock_operations|
- file_operations|
- hv_ops|
- ide_dma_ops|
- intel_dvo_dev_ops|
- item_operations|
- iwl_ops|
- kgdb_arch|
- kgdb_io|
- kset_uevent_ops|
- lock_manager_operations|
- microcode_ops|
- mtrr_ops|
- neigh_ops|
- nlmsvc_binding|
- pci_raw_ops|
- pipe_buf_operations|
- platform_hibernation_ops|
- platform_suspend_ops|
- proto_ops|
- rpc_pipe_ops|
- seq_operations|
- snd_ac97_build_ops|
- soc_pcmcia_socket_ops|
- stacktrace_ops|
- sysfs_ops|
- tty_operations|
- usb_mon_operations|
- wd_ops}x;
- if ($line !~ /\bconst\b/ &&
- $line =~ /\bstruct\s+($struct_ops)\b/) {
- WARN("CONST_STRUCT",
- "struct $1 should normally be const\n" .
- $herecurr);
- }
-
-# use of NR_CPUS is usually wrong
-# ignore definitions of NR_CPUS and usage to define arrays as likely right
- if ($line =~ /\bNR_CPUS\b/ &&
- $line !~ /^.\s*\s*#\s*if\b.*\bNR_CPUS\b/ &&
- $line !~ /^.\s*\s*#\s*define\b.*\bNR_CPUS\b/ &&
- $line !~ /^.\s*$Declare\s.*\[[^\]]*NR_CPUS[^\]]*\]/ &&
- $line !~ /\[[^\]]*\.\.\.[^\]]*NR_CPUS[^\]]*\]/ &&
- $line !~ /\[[^\]]*NR_CPUS[^\]]*\.\.\.[^\]]*\]/)
- {
- WARN("NR_CPUS",
- "usage of NR_CPUS is often wrong - consider using cpu_possible(), num_possible_cpus(), for_each_possible_cpu(), etc\n" . $herecurr);
- }
-
-# Use of __ARCH_HAS_<FOO> or ARCH_HAVE_<BAR> is wrong.
- if ($line =~ /\+\s*#\s*define\s+((?:__)?ARCH_(?:HAS|HAVE)\w*)\b/) {
- ERROR("DEFINE_ARCH_HAS",
- "#define of '$1' is wrong - use Kconfig variables or standard guards instead\n" . $herecurr);
- }
-
-# whine mightly about in_atomic
- if ($line =~ /\bin_atomic\s*\(/) {
- if ($realfile =~ m@^drivers/@) {
- ERROR("IN_ATOMIC",
- "do not use in_atomic in drivers\n" . $herecurr);
- } elsif ($realfile !~ m@^kernel/@) {
- WARN("IN_ATOMIC",
- "use of in_atomic() is incorrect outside core kernel code\n" . $herecurr);
- }
- }
-
-# check for lockdep_set_novalidate_class
- if ($line =~ /^.\s*lockdep_set_novalidate_class\s*\(/ ||
- $line =~ /__lockdep_no_validate__\s*\)/ ) {
- if ($realfile !~ m@^kernel/lockdep@ &&
- $realfile !~ m@^include/linux/lockdep@ &&
- $realfile !~ m@^drivers/base/core@) {
- ERROR("LOCKDEP",
- "lockdep_no_validate class is reserved for device->mutex.\n" . $herecurr);
- }
- }
-
- if ($line =~ /debugfs_create_file.*S_IWUGO/ ||
- $line =~ /DEVICE_ATTR.*S_IWUGO/ ) {
- WARN("EXPORTED_WORLD_WRITABLE",
- "Exporting world writable files is usually an error. Consider more restrictive permissions.\n" . $herecurr);
- }
-
-# Mode permission misuses where it seems decimal should be octal
-# This uses a shortcut match to avoid unnecessary uses of a slow foreach loop
- if ($^V && $^V ge 5.10.0 &&
- $line =~ /$mode_perms_search/) {
- foreach my $entry (@mode_permission_funcs) {
- my $func = $entry->[0];
- my $arg_pos = $entry->[1];
-
- my $skip_args = "";
- if ($arg_pos > 1) {
- $arg_pos--;
- $skip_args = "(?:\\s*$FuncArg\\s*,\\s*){$arg_pos,$arg_pos}";
- }
- my $test = "\\b$func\\s*\\(${skip_args}([\\d]+)\\s*[,\\)]";
- if ($line =~ /$test/) {
- my $val = $1;
- $val = $6 if ($skip_args ne "");
-
- if ($val !~ /^0$/ &&
- (($val =~ /^$Int$/ && $val !~ /^$Octal$/) ||
- length($val) ne 4)) {
- ERROR("NON_OCTAL_PERMISSIONS",
- "Use 4 digit octal (0777) not decimal permissions\n" . $herecurr);
- }
- }
- }
- }
- }
-
- # If we have no input at all, then there is nothing to report on
- # so just keep quiet.
- if ($#rawlines == -1) {
- exit(0);
- }
-
- # In mailback mode only produce a report in the negative, for
- # things that appear to be patches.
- if ($mailback && ($clean == 1 || !$is_patch)) {
- exit(0);
- }
-
- # This is not a patch, and we are are in 'no-patch' mode so
- # just keep quiet.
- if (!$chk_patch && !$is_patch) {
- exit(0);
- }
-
- if (!$is_patch) {
- ERROR("NOT_UNIFIED_DIFF",
- "Does not appear to be a unified-diff format patch\n");
- }
- if ($is_patch && $chk_signoff && $signoff == 0) {
- ERROR("MISSING_SIGN_OFF",
- "Missing Signed-off-by: line(s)\n");
- }
-
- print report_dump();
- if ($summary && !($clean == 1 && $quiet == 1)) {
- print "$filename " if ($summary_file);
- print "total: $cnt_error errors, $cnt_warn warnings, " .
- (($check)? "$cnt_chk checks, " : "") .
- "$cnt_lines lines checked\n";
- print "\n" if ($quiet == 0);
- }
-
- if ($quiet == 0) {
-
- if ($^V lt 5.10.0) {
- print("NOTE: perl $^V is not modern enough to detect all possible issues.\n");
- print("An upgrade to at least perl v5.10.0 is suggested.\n\n");
- }
-
- # If there were whitespace errors which cleanpatch can fix
- # then suggest that.
- if ($rpt_cleaners) {
- print "NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or\n";
- print " scripts/cleanfile\n\n";
- $rpt_cleaners = 0;
- }
- }
-
- hash_show_words(\%use_type, "Used");
- hash_show_words(\%ignore_type, "Ignored");
-
- if ($clean == 0 && $fix &&
- ("@rawlines" ne "@fixed" ||
- $#fixed_inserted >= 0 || $#fixed_deleted >= 0)) {
- my $newfile = $filename;
- $newfile .= ".EXPERIMENTAL-checkpatch-fixes" if (!$fix_inplace);
- my $linecount = 0;
- my $f;
-
- @fixed = fix_inserted_deleted_lines(\@fixed, \@fixed_inserted, \@fixed_deleted);
-
- open($f, '>', $newfile)
- or die "$P: Can't open $newfile for write\n";
- foreach my $fixed_line (@fixed) {
- $linecount++;
- if ($file) {
- if ($linecount > 3) {
- $fixed_line =~ s/^\+//;
- print $f $fixed_line . "\n";
- }
- } else {
- print $f $fixed_line . "\n";
- }
- }
- close($f);
-
- if (!$quiet) {
- print << "EOM";
-Wrote EXPERIMENTAL --fix correction(s) to '$newfile'
-
-Do _NOT_ trust the results written to this file.
-Do _NOT_ submit these changes without inspecting them for correctness.
-
-This EXPERIMENTAL file is simply a convenience to help rewrite patches.
-No warranties, expressed or implied...
-
-EOM
- }
- }
-
- if ($clean == 1 && $quiet == 0) {
- print "$vname has no obvious style problems and is ready for submission.\n"
- }
- if ($clean == 0 && $quiet == 0) {
- print << "EOM";
-$vname has style problems, please review.
-
-If any of these errors are false positives, please report
-them to the maintainer, see CHECKPATCH in MAINTAINERS.
-EOM
- }
-
- return $clean;
-}
More information about the coreboot-gerrit
mailing list