[coreboot-gerrit] Patch set updated for coreboot: mainboard/bap: Add new mainboard e21XX
Fabian Kunkel (fabi@adv.bruhnspace.com)
gerrit at coreboot.org
Tue Jul 26 16:07:51 CEST 2016
Fabian Kunkel (fabi at adv.bruhnspace.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/15650
-gerrit
commit 3a9b0954bad712277e9cc896a957ac2b553e8eb1
Author: Fabian Kunkel <fabi at adv.bruhnspace.com>
Date: Wed Jul 13 10:40:55 2016 +0200
mainboard/bap: Add new mainboard e21XX
Adding next generation of BAPs (http://www.unibap.com/) SOC module.
Hardware is simular to e20XX,
but it includes a new AMD G-Series GX-412HC (Steppe Eagle) and
an updated Microsemi FPGA.
Code is a copy of amd/olivehillplus with some changes.
Specialities are:
-Added SuperIO Fintek F81866D
-Soldered down DDR3 RAM + ECC
-Different SPD files for changeable DDR3 clock settings.
(lowest setting saves up to 1.2W under full load)
-Soldered down FPGA Microsemi M2S060 using 2 PCIe lanes
Tested with:
- Payload Seabios 1.9.1
- Lubuntu 16.04, Kernel 4.4.0
Known problems:
-S3 not working
-IOMMU not working
Change-Id: Ia68d9e70a6cd09035799399ca2aadb76839a0e16
Signed-off-by: Fabian Kunkel <fabi at adv.bruhnspace.com>
---
src/mainboard/bap/ode_e21XX/BAP_Q7_1066.spd.hex | 231 ++++++++++++++++
src/mainboard/bap/ode_e21XX/BAP_Q7_1333.spd.hex | 231 ++++++++++++++++
src/mainboard/bap/ode_e21XX/BAP_Q7_800.spd.hex | 231 ++++++++++++++++
src/mainboard/bap/ode_e21XX/BiosCallOuts.c | 337 ++++++++++++++++++++++++
src/mainboard/bap/ode_e21XX/Kconfig | 77 ++++++
src/mainboard/bap/ode_e21XX/Kconfig.name | 2 +
src/mainboard/bap/ode_e21XX/Makefile.inc | 40 +++
src/mainboard/bap/ode_e21XX/OemCustomize.c | 106 ++++++++
src/mainboard/bap/ode_e21XX/acpi/AmdImc.asl | 109 ++++++++
src/mainboard/bap/ode_e21XX/acpi/gpe.asl | 74 ++++++
src/mainboard/bap/ode_e21XX/acpi/ide.asl | 2 +
src/mainboard/bap/ode_e21XX/acpi/mainboard.asl | 37 +++
src/mainboard/bap/ode_e21XX/acpi/routing.asl | 193 ++++++++++++++
src/mainboard/bap/ode_e21XX/acpi/si.asl | 23 ++
src/mainboard/bap/ode_e21XX/acpi/sleep.asl | 95 +++++++
src/mainboard/bap/ode_e21XX/acpi/superio.asl | 48 ++++
src/mainboard/bap/ode_e21XX/acpi/thermal.asl | 2 +
src/mainboard/bap/ode_e21XX/acpi/usb_oc.asl | 36 +++
src/mainboard/bap/ode_e21XX/acpi_tables.c | 56 ++++
src/mainboard/bap/ode_e21XX/board_info.txt | 6 +
src/mainboard/bap/ode_e21XX/cmos.layout | 74 ++++++
src/mainboard/bap/ode_e21XX/devicetree.cb | 116 ++++++++
src/mainboard/bap/ode_e21XX/dsdt.asl | 89 +++++++
src/mainboard/bap/ode_e21XX/irq_tables.c | 103 ++++++++
src/mainboard/bap/ode_e21XX/mainboard.c | 41 +++
src/mainboard/bap/ode_e21XX/mptable.c | 190 +++++++++++++
src/mainboard/bap/ode_e21XX/romstage.c | 123 +++++++++
27 files changed, 2672 insertions(+)
diff --git a/src/mainboard/bap/ode_e21XX/BAP_Q7_1066.spd.hex b/src/mainboard/bap/ode_e21XX/BAP_Q7_1066.spd.hex
new file mode 100644
index 0000000..507c9f1
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/BAP_Q7_1066.spd.hex
@@ -0,0 +1,231 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2014 Sage Electronic Engineering, LLC.
+# Copyright (C) 2015 BAP - Bruhnspace Advanced Projects
+# (Written by Fabian Kunkel <fabi at adv.bruhnspace.com> for BAP)
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# Memory chip: Hynix H5TQ4G63MFR-PBC with ECC
+# BAP ODE E21XX has 2GB ram soldered down on the Q7
+# Memory setting for DDR-1066
+
+# 0 Number of SPD Bytes used / Total SPD Size / CRC Coverage
+# bits[3:0]: 1 = 128 SPD Bytes Used
+# bits[6:4]: 1 = 256 SPD Bytes Total
+# bit7 : 0 = CRC covers bytes 0 ~ 125
+11
+
+# 1 SPD Revision -
+# 0x12 = Revision 1.2
+12
+
+# 2 Key Byte / DRAM Device Type
+# bits[7:0]: 0x0b = DDR3 SDRAM
+0B
+
+# 3 Key Byte / Module Type
+# bits[3:0]: 3 = SO-DIMM
+# bits[7:4]: reserved
+03
+
+# 4 SDRAM CHIP Density and Banks
+# bits[3:0]: 4 = 4 Gigabits Total SDRAM capacity per chip
+# bits[6:4]: 0 = 3 (8 banks)
+# bit7 : reserved
+04
+
+# 5 SDRAM Addressing
+# bits[2:0]: 1 = 10 Column Address Bits
+# bits[5:3]: 3 = 15 Row Address Bits
+# bits[7:6]: reserved
+19
+
+# 6 Module Nominal Voltage, VDD
+# bit0 : 0 = 1.5 V operable
+# bit1 : 0 = NOT 1.35 V operable
+# bit2 : 0 = NOT 1.25 V operable
+# bits[7:3]: reserved
+00
+
+# 7 Module Organization
+# bits[2:0]: 2 = 16 bits
+# bits[5:3]: 0 = 1 Rank
+# bits[7:6]: reserved
+02
+
+# 8 Module Memory Bus Width
+# bits[2:0]: 3 = Primary bus width is 64 bits
+# bits[4:3]: 1 = 1 bit (bus width extension ECC)
+# bits[7:5]: reserved
+0B
+
+# 9 Fine Timebase (FTB) Dividend / Divisor
+# bits[3:0]: 0x01 divisor
+# bits[7:4]: 0x01 dividend
+# 1/1 = 1ps
+11
+
+# 10 Medium Timebase (MTB) Dividend
+# 11 Medium Timebase (MTB) Divisor
+# 1 / 8 = .125 ns - used for DDR3
+01 08
+
+# 12 SDRAM Minimum Cycle Time (tCKmin)
+# 0x0F = tCKmin of 1.875 ns = DDR3-1066 (533 MHz clock)
+0F
+
+# 13 Reserved
+00
+
+# 14 CAS Latencies Supported, Least Significant Byte
+# 15 CAS Latencies Supported, Most Significant Byte
+# Cas Latencies of 8 - 5 are supported
+1E 00
+
+# 16 Minimum CAS Latency Time (tAAmin)
+# 0x69 = 13.125ns - DDR3-1066F
+69
+
+# 17 Minimum Write Recovery Time (tWRmin)
+# 0x78 = tWR of 15ns - All DDR3 speed grades
+78
+
+# 18 Minimum RAS# to CAS# Delay Time (tRCDmin)
+# 0x69 = 13.125ns - DDR3-1066F
+69
+
+# 19 Minimum Row Active to Row Active Delay Time (tRRDmin)
+# 0x3C = 7.5ns
+3C
+
+# 20 Minimum Row Precharge Delay Time (tRPmin)
+# 0x69 = 13.125ns - DDR3-1066F
+69
+
+# 21 Upper Nibbles for tRAS and tRC
+# bits[3:0]: tRAS most significant nibble = 1 (see byte 22)
+# bits[7:4]: tRC most significant nibble = 1 (see byte 23)
+11
+
+# 22 Minimum Active to Precharge Delay Time (tRASmin), LSB
+# 0x12C = 37.5ns - DDR3-1066 (see byte 21)
+2C
+
+# 23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB
+# 0x195 = 50.625ns - DDR3-1066F (see byte 21)
+95
+
+# 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB
+# 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB
+# 0x500 = 160ns - for 2 Gigabit chips
+80 07
+
+# 26 Minimum Internal Write to Read Command Delay Time (tWTRmin)
+# 0x3c = 7.5 ns - All DDR3 SDRAM speed bins
+3C
+
+# 27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin)
+# 0x3c = 7.5ns - All DDR3 SDRAM speed bins
+3C
+
+# 28 Upper Nibble for tFAWmin
+# 29 Minimum Four Activate Window Delay Time (tFAWmin)
+# 0x0190 = 50ns - DDR3-1066, 2 KB page size
+01 90
+
+# 30 SDRAM Optional Feature
+# bit0 : 1= RZQ/6 supported
+# bit1 : 1 = RZQ/7 supported
+# bits[6:2]: reserved
+# bit7 : 0 = DLL Off mode supported
+03
+
+# 31 SDRAM Thermal and Refresh Options
+# bit0 : 0 = Temp up to 95c supported
+# bit1 : 0 = 85-95c uses 2x refresh rate
+# bit2 : 1 = Auto Self Refresh supported
+# bit3 : 0 = no on die thermal sensor
+# bits[6:4]: reserved
+# bit7 : 0 = partial self refresh supported
+04
+
+# 32 Module Thermal Sensor
+# 0 = Thermal sensor not incorporated onto this assembly
+00
+
+# 33 SDRAM Device Type
+# bits[1:0]: 0 = Signal Loading not specified
+# bits[3:2]: reserved
+# bits[6:4]: 0 = Die count not specified
+# bit7 : 0 = Standard Monolithic DRAM Device
+00
+
+# 34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin)
+# 35 Fine Offset for Minimum CAS Latency Time (tAAmin)
+# 36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin)
+# 37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin)
+# 38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin)
+00 00 00 00 00
+
+# 39 - 59 (reserved)
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00
+
+# 60 Raw Card Extension, Module Nominal Height
+# bits[4:0]: 0 = <= 15mm tall
+# bits[7:5]: 0 = raw card revision 0-3
+00
+
+# 61 Module Maximum Thickness
+# bits[3:0]: 0 = thickness front <= 1mm
+# bits[7:4]: 0 = thinkness back <= 1mm
+00
+
+# 62 Reference Raw Card Used
+# bits[4:0]: 0 = Reference Raw card A used
+# bits[6:5]: 0 = revision 0
+# bit7 : 0 = Reference raw cards A through AL
+00
+
+# 63 Address Mapping from Edge Connector to DRAM
+# bit0 : 0 = standard mapping (not mirrored)
+# bits[7:1]: reserved
+00
+
+# 64 - 116 (reserved)
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00
+
+# 117 - 118 Module ID: Module Manufacturers JEDEC ID Code
+# 0x80AD = Hynix
+80 AD
+
+# 119 Module ID: Module Manufacturing Location - oem specified
+# 120 Module ID: Module Manufacture Year in BCD
+# 0x00 = 2000
+00 00
+
+# 121 Module ID: Module Manufacture week
+# 0x00 = 0th week
+00
+
+# 122 - 125: Module Serial Number
+00 00 00 00
+
+# 126 - 127: Cyclical Redundancy Code
+E9 40
diff --git a/src/mainboard/bap/ode_e21XX/BAP_Q7_1333.spd.hex b/src/mainboard/bap/ode_e21XX/BAP_Q7_1333.spd.hex
new file mode 100644
index 0000000..1991f84
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/BAP_Q7_1333.spd.hex
@@ -0,0 +1,231 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2014 Sage Electronic Engineering, LLC.
+# Copyright (C) 2015 BAP - Bruhnspace Advanced Projects
+# (Written by Fabian Kunkel <fabi at adv.bruhnspace.com> for BAP)
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# Memory chip: Hynix H5TQ4G63MFR-PBC with ECC
+# BAP ODE E21XX has 2GB ram soldered down on the Q7
+# Memory setting for DDR-1333
+
+# 0 Number of SPD Bytes used / Total SPD Size / CRC Coverage
+# bits[3:0]: 1 = 128 SPD Bytes Used
+# bits[6:4]: 1 = 256 SPD Bytes Total
+# bit7 : 0 = CRC covers bytes 0 ~ 125
+11
+
+# 1 SPD Revision -
+# 0x13 = Revision 1.3
+13
+
+# 2 Key Byte / DRAM Device Type
+# bits[7:0]: 0x0b = DDR3 SDRAM
+0B
+
+# 3 Key Byte / Module Type
+# bits[3:0]: 3 = SO-DIMM
+# bits[7:4]: reserved
+03
+
+# 4 SDRAM CHIP Density and Banks
+# bits[3:0]: 4 = 4 Gigabits Total SDRAM capacity per chip
+# bits[6:4]: 0 = 3 (8 banks)
+# bit7 : reserved
+04
+
+# 5 SDRAM Addressing
+# bits[2:0]: 1 = 10 Column Address Bits
+# bits[5:3]: 3 = 15 Row Address Bits
+# bits[7:6]: reserved
+19
+
+# 6 Module Nominal Voltage, VDD
+# bit0 : 0 = 1.5 V operable
+# bit1 : 0 = NOT 1.35 V operable
+# bit2 : 0 = NOT 1.25 V operable
+# bits[7:3]: reserved
+00
+
+# 7 Module Organization
+# bits[2:0]: 2 = 16 bits
+# bits[5:3]: 0 = 1 Rank
+# bits[7:6]: reserved
+02
+
+# 8 Module Memory Bus Width
+# bits[2:0]: 3 = Primary bus width is 64 bits
+# bits[4:3]: 1 = 1 bit (bus width extension ECC)
+# bits[7:5]: reserved
+0B
+
+# 9 Fine Timebase (FTB) Dividend / Divisor
+# bits[3:0]: 0x01 divisor
+# bits[7:4]: 0x01 dividend
+# 1/1 = 1ps
+11
+
+# 10 Medium Timebase (MTB) Dividend
+# 11 Medium Timebase (MTB) Divisor
+# 1 / 8 = .125 ns - used for DDR3
+01 08
+
+# 12 SDRAM Minimum Cycle Time (tCKmin)
+# 0x0C = tCKmin of 1.5 ns = DDR3-1333 (667 MHz clock)
+0C
+
+# 13 Reserved
+00
+
+# 14 CAS Latencies Supported, Least Significant Byte
+# 15 CAS Latencies Supported, Most Significant Byte
+# Cas Latencies of 9 - 5 are supported (no 7)
+36 00
+
+# 16 Minimum CAS Latency Time (tAAmin)
+# 0x6C = 13.5ns - DDR3-1333H
+6C
+
+# 17 Minimum Write Recovery Time (tWRmin)
+# 0x78 = tWR of 15ns - All DDR3 speed grades
+78
+
+# 18 Minimum RAS# to CAS# Delay Time (tRCDmin)
+# 0x6C = 13.5ns - DDR3-1333H
+6C
+
+# 19 Minimum Row Active to Row Active Delay Time (tRRDmin)
+# 0x3C = 7.5ns
+3C
+
+# 20 Minimum Row Precharge Delay Time (tRPmin)
+# 0x6C = 13.5ns - DDR3-1333H
+6C
+
+# 21 Upper Nibbles for tRAS and tRC
+# bits[3:0]: tRAS most significant nibble = 1 (see byte 22)
+# bits[7:4]: tRC most significant nibble = 1 (see byte 23)
+11
+
+# 22 Minimum Active to Precharge Delay Time (tRASmin), LSB
+# 0x120 = 36ns - DDR3-1333 (see byte 21)
+20
+
+# 23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB
+# 0x18C = 49.5ns - DDR3-1333H (see byte 21)
+8C
+
+# 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB
+# 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB
+# 0x500 = 160ns - for 2 Gigabit chips
+80 07
+
+# 26 Minimum Internal Write to Read Command Delay Time (tWTRmin)
+# 0x3c = 7.5 ns - All DDR3 SDRAM speed bins
+3C
+
+# 27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin)
+# 0x3c = 7.5ns - All DDR3 SDRAM speed bins
+3C
+
+# 28 Upper Nibble for tFAWmin
+# 29 Minimum Four Activate Window Delay Time (tFAWmin)
+# 0x0168 = 45ns - DDR3-1333, 2 KB page size
+01 68
+
+# 30 SDRAM Optional Feature
+# bit0 : 1= RZQ/6 supported
+# bit1 : 1 = RZQ/7 supported
+# bits[6:2]: reserved
+# bit7 : 0 = DLL Off mode supported
+03
+
+# 31 SDRAM Thermal and Refresh Options
+# bit0 : 0 = Temp up to 95c supported
+# bit1 : 0 = 85-95c uses 2x refresh rate
+# bit2 : 1 = Auto Self Refresh supported
+# bit3 : 0 = no on die thermal sensor
+# bits[6:4]: reserved
+# bit7 : 0 = partial self refresh supported
+04
+
+# 32 Module Thermal Sensor
+# 0 = Thermal sensor not incorporated onto this assembly
+00
+
+# 33 SDRAM Device Type
+# bits[1:0]: 0 = Signal Loading not specified
+# bits[3:2]: reserved
+# bits[6:4]: 0 = Die count not specified
+# bit7 : 0 = Standard Monolithic DRAM Device
+00
+
+# 34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin)
+# 35 Fine Offset for Minimum CAS Latency Time (tAAmin)
+# 36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin)
+# 37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin)
+# 38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin)
+00 00 00 00 00
+
+# 39 - 59 (reserved)
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00
+
+# 60 Raw Card Extension, Module Nominal Height
+# bits[4:0]: 0 = <= 15mm tall
+# bits[7:5]: 0 = raw card revision 0-3
+00
+
+# 61 Module Maximum Thickness
+# bits[3:0]: 0 = thickness front <= 1mm
+# bits[7:4]: 0 = thinkness back <= 1mm
+00
+
+# 62 Reference Raw Card Used
+# bits[4:0]: 0 = Reference Raw card A used
+# bits[6:5]: 0 = revision 0
+# bit7 : 0 = Reference raw cards A through AL
+00
+
+# 63 Address Mapping from Edge Connector to DRAM
+# bit0 : 0 = standard mapping (not mirrored)
+# bits[7:1]: reserved
+00
+
+# 64 - 116 (reserved)
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00
+
+# 117 - 118 Module ID: Module Manufacturers JEDEC ID Code
+# 0x80AD = Hynix
+80 AD
+
+# 119 Module ID: Module Manufacturing Location - oem specified
+# 120 Module ID: Module Manufacture Year in BCD
+# 0x00 = 2000
+00 00
+
+# 121 Module ID: Module Manufacture week
+# 0x00 = 0th week
+00
+
+# 122 - 125: Module Serial Number
+00 00 00 00
+
+# 126 - 127: Cyclical Redundancy Code
+95 b9
diff --git a/src/mainboard/bap/ode_e21XX/BAP_Q7_800.spd.hex b/src/mainboard/bap/ode_e21XX/BAP_Q7_800.spd.hex
new file mode 100644
index 0000000..e657179
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/BAP_Q7_800.spd.hex
@@ -0,0 +1,231 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2014 Sage Electronic Engineering, LLC.
+# Copyright (C) 2015 BAP - Bruhnspace Advanced Projects
+# (Written by Fabian Kunkel <fabi at adv.bruhnspace.com> for BAP)
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# Memory chip: Hynix H5TQ4G63MFR-PBC with ECC
+# BAP ODE E21XX has 2GB ram soldered down on the Q7
+# Memory setting for DDR-800
+
+# 0 Number of SPD Bytes used / Total SPD Size / CRC Coverage
+# bits[3:0]: 1 = 128 SPD Bytes Used
+# bits[6:4]: 1 = 256 SPD Bytes Total
+# bit7 : 0 = CRC covers bytes 0 ~ 125
+11
+
+# 1 SPD Revision -
+# 0x11 = Revision 1.1
+11
+
+# 2 Key Byte / DRAM Device Type
+# bits[7:0]: 0x0b = DDR3 SDRAM
+0B
+
+# 3 Key Byte / Module Type
+# bits[3:0]: 3 = SO-DIMM
+# bits[7:4]: reserved
+03
+
+# 4 SDRAM CHIP Density and Banks
+# bits[3:0]: 4 = 4 Gigabits Total SDRAM capacity per chip
+# bits[6:4]: 0 = 3 (8 banks)
+# bit7 : reserved
+04
+
+# 5 SDRAM Addressing
+# bits[2:0]: 1 = 10 Column Address Bits
+# bits[5:3]: 3 = 15 Row Address Bits
+# bits[7:6]: reserved
+19
+
+# 6 Module Nominal Voltage, VDD
+# bit0 : 0 = 1.5 V operable
+# bit1 : 0 = NOT 1.35 V operable
+# bit2 : 0 = NOT 1.25 V operable
+# bits[7:3]: reserved
+00
+
+# 7 Module Organization
+# bits[2:0]: 2 = 16 bits
+# bits[5:3]: 0 = 1 Rank
+# bits[7:6]: reserved
+02
+
+# 8 Module Memory Bus Width
+# bits[2:0]: 3 = Primary bus width is 64 bits
+# bits[4:3]: 1 = 1 bit (bus width extension ECC)
+# bits[7:5]: reserved
+0B
+
+# 9 Fine Timebase (FTB) Dividend / Divisor
+# bits[3:0]: 0x01 divisor
+# bits[7:4]: 0x01 dividend
+# 1/1 = 1ps
+11
+
+# 10 Medium Timebase (MTB) Dividend
+# 11 Medium Timebase (MTB) Divisor
+# 1 / 8 = .125 ns - used for DDR3
+01 08
+
+# 12 SDRAM Minimum Cycle Time (tCKmin)
+# 0x14 = tCKmin of 2.5 ns = DDR3-800 (400 MHz clock)
+14
+
+# 13 Reserved
+00
+
+# 14 CAS Latencies Supported, Least Significant Byte
+# 15 CAS Latencies Supported, Most Significant Byte
+# CAS Latencies of 6 - 5 are supported
+06 00
+
+# 16 Minimum CAS Latency Time (tAAmin)
+# 0x78 = 15ns - DDR3-800E
+78
+
+# 17 Minimum Write Recovery Time (tWRmin)
+# 0x78 = tWR of 15ns - All DDR3 speed grades
+78
+
+# 18 Minimum RAS# to CAS# Delay Time (tRCDmin)
+# 0x6E = 15ns - DDR3-800E
+78
+
+# 19 Minimum Row Active to Row Active Delay Time (tRRDmin)
+# 0x3C = 7.5ns
+3C
+
+# 20 Minimum Row Precharge Delay Time (tRPmin)
+# 0x6E = 15ns - DDR3-800E
+78
+
+# 21 Upper Nibbles for tRAS and tRC
+# bits[3:0]: tRAS most significant nibble = 1 (see byte 22)
+# bits[7:4]: tRC most significant nibble = 1 (see byte 23)
+11
+
+# 22 Minimum Active to Precharge Delay Time (tRASmin), LSB
+# 0x12C = 37.5ns - DDR3-800E (see byte 21)
+2C
+
+# 23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB
+# 0x1A4 = 52.5ns - DDR3-800E (see byte 21)
+A4
+
+# 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB
+# 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB
+# 0x780 = 208ns - for 4 Gigabit chips
+80 07
+
+# 26 Minimum Internal Write to Read Command Delay Time (tWTRmin)
+# 0x3c = 7.5 ns - All DDR3 SDRAM speed bins
+3C
+
+# 27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin)
+# 0x3c = 7.5ns - All DDR3 SDRAM speed bins
+3C
+
+# 28 Upper Nibble for tFAWmin
+# 29 Minimum Four Activate Window Delay Time (tFAWmin)
+# 0x0190 = 50ns - DDR3-800, 2 KB page size
+01 90
+
+# 30 SDRAM Optional Feature
+# bit0 : 1= RZQ/6 supported
+# bit1 : 1 = RZQ/7 supported
+# bits[6:2]: reserved
+# bit7 : 0 = DLL Off mode supported
+03
+
+# 31 SDRAM Thermal and Refresh Options
+# bit0 : 0 = Temp up to 95c supported
+# bit1 : 0 = 85-95c uses 2x refresh rate
+# bit2 : 1 = Auto Self Refresh supported
+# bit3 : 0 = no on die thermal sensor
+# bits[6:4]: reserved
+# bit7 : 0 = partial self refresh supported
+04
+
+# 32 Module Thermal Sensor
+# 0 = Thermal sensor not incorporated onto this assembly
+00
+
+# 33 SDRAM Device Type
+# bits[1:0]: 0 = Signal Loading not specified
+# bits[3:2]: reserved
+# bits[6:4]: 0 = Die count not specified
+# bit7 : 0 = Standard Monolithic DRAM Device
+00
+
+# 34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin)
+# 35 Fine Offset for Minimum CAS Latency Time (tAAmin)
+# 36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin)
+# 37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin)
+# 38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin)
+00 00 00 00 00
+
+# 39 - 59 (reserved)
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00
+
+# 60 Raw Card Extension, Module Nominal Height
+# bits[4:0]: 0 = <= 15mm tall
+# bits[7:5]: 0 = raw card revision 0-3
+00
+
+# 61 Module Maximum Thickness
+# bits[3:0]: 0 = thickness front <= 1mm
+# bits[7:4]: 0 = thinkness back <= 1mm
+00
+
+# 62 Reference Raw Card Used
+# bits[4:0]: 0 = Reference Raw card A used
+# bits[6:5]: 0 = revision 0
+# bit7 : 0 = Reference raw cards A through AL
+00
+
+# 63 Address Mapping from Edge Connector to DRAM
+# bit0 : 0 = standard mapping (not mirrored)
+# bits[7:1]: reserved
+00
+
+# 64 - 116 (reserved)
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00
+
+# 117 - 118 Module ID: Module Manufacturers JEDEC ID Code
+# 0x80AD = Hynix
+80 AD
+
+# 119 Module ID: Module Manufacturing Location - oem specified
+# 120 Module ID: Module Manufacture Year in BCD
+# 0x00 = 2000
+00 00
+
+# 121 Module ID: Module Manufacture week
+# 0x00 = 0th week
+00
+
+# 122 - 125: Module Serial Number
+00 00 00 00
+
+# 126 - 127: Cyclical Redundancy Code
+48 91
diff --git a/src/mainboard/bap/ode_e21XX/BiosCallOuts.c b/src/mainboard/bap/ode_e21XX/BiosCallOuts.c
new file mode 100644
index 0000000..0f9c216
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/BiosCallOuts.c
@@ -0,0 +1,337 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include <northbridge/amd/pi/BiosCallOuts.h>
+#include "Ids.h"
+#include "heapManager.h"
+#include "FchPlatform.h"
+#include "cbfs.h"
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+#include "imc.h"
+#endif
+#include "hudson.h"
+#include <stdlib.h>
+#include <spd_cache.h>
+
+static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr);
+static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINTN Data, VOID *ConfigPtr);
+
+const BIOS_CALLOUT_STRUCT BiosCallouts[] =
+{
+ {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer },
+ {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer },
+ {AGESA_LOCATE_BUFFER, agesa_LocateBuffer },
+ {AGESA_READ_SPD, board_ReadSpd_from_cbfs },
+ {AGESA_DO_RESET, agesa_Reset },
+ {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
+ {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
+ {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData },
+ {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
+ {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
+ {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config },
+ {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage }
+};
+const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
+
+/**
+ * Realtek ALC272 CODEC Verb Table
+ */
+static const CODEC_ENTRY Alc272_VerbTbl[] = {
+ {0x11, 0x411111F0}, // - SPDIF_OUT2
+ {0x12, 0x411111F0}, // - DMIC_1/2
+ {0x13, 0x411111F0}, // - DMIC_3/4
+ {0x14, 0x411111F0}, // Port D - LOUT1
+ {0x15, 0x411111F0}, // Port A - LOUT2
+ {0x16, 0x411111F0}, //
+ {0x17, 0x411111F0}, // Port H - MONO
+ {0x18, 0x01a19840}, // Port B - MIC1
+ {0x19, 0x411111F0}, // Port F - MIC2
+ {0x1a, 0x01813030}, // Port C - LINE1
+ {0x1b, 0x411111F0}, // Port E - LINE2
+ {0x1d, 0x40251E05}, // - PCBEEP
+ {0x1e, 0x01441120}, // - SPDIF_OUT1
+ {0x21, 0x01214010}, // Port I - HPOUT
+ {0xff, 0xffffffff}
+};
+
+static const CODEC_TBL_LIST CodecTableList[] =
+{
+ {0x10ec0272, (CODEC_ENTRY*)&Alc272_VerbTbl[0]},
+ {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
+};
+
+#define FAN_INPUT_INTERNAL_DIODE 0
+#define FAN_INPUT_TEMP0 1
+#define FAN_INPUT_TEMP1 2
+#define FAN_INPUT_TEMP2 3
+#define FAN_INPUT_TEMP3 4
+#define FAN_INPUT_TEMP0_FILTER 5
+#define FAN_INPUT_ZERO 6
+#define FAN_INPUT_DISABLED 7
+
+#define FAN_AUTOMODE (1 << 0)
+#define FAN_LINEARMODE (1 << 1)
+#define FAN_STEPMODE ~(1 << 1)
+#define FAN_POLARITY_HIGH (1 << 2)
+#define FAN_POLARITY_LOW ~(1 << 2)
+
+/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
+#define FREQ_28KHZ 0x0
+#define FREQ_25KHZ 0x1
+#define FREQ_23KHZ 0x2
+#define FREQ_21KHZ 0x3
+#define FREQ_29KHZ 0x4
+#define FREQ_18KHZ 0x5
+#define FREQ_100HZ 0xF7
+#define FREQ_87HZ 0xF8
+#define FREQ_58HZ 0xF9
+#define FREQ_44HZ 0xFA
+#define FREQ_35HZ 0xFB
+#define FREQ_29HZ 0xFC
+#define FREQ_22HZ 0xFD
+#define FREQ_14HZ 0xFE
+#define FREQ_11HZ 0xFF
+
+/*
+ * Hardware Monitor Fan Control
+ * Hardware limitation:
+ * HWM will fail to read the input temperature via I2C if other
+ * software switches the I2C address. AMD recommends using IMC
+ * to control fans, instead of HWM.
+ */
+static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
+{
+ FCH_HWM_FAN_CTR oem_factl[5] = {
+ /*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
+ /* DB-FT3 FanOUT0 Fan header J32 */
+ {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
+ /* DB-FT3 FanOUT1 Fan header J31*/
+ {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
+ {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
+ {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
+ {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
+ };
+ LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
+
+ /* Enable IMC fan control. the recommended way */
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+
+ /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */
+
+ FchParams->Imc.ImcEnable = TRUE;
+ FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
+ FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
+
+ LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+
+ /* Thermal Zone Parameter */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e; //6 | BIT3;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
+
+ /* IMC Fan Policy temperature thresholds */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
+
+ /* IMC Fan Policy PWM Settings */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
+
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
+
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
+
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
+
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
+
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
+
+ /* IMC Function */
+ FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333; //BIT0 | BIT4 |BIT8;
+
+ /* NOTE:
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+ * AGESA put EcDefaultMessage as global data in ROM, so we can't override it.
+ * so we remove it from AGESA code. Please See FchInitLateHwm.
+ */
+
+#else /* HWM fan control, using the alternative method */
+ FchParams->Imc.ImcEnable = FALSE;
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = TRUE; /* 1 enable, 0 disable TSI Auto Polling */
+
+#endif /* CONFIG_HUDSON_IMC_FWM */
+}
+
+/**
+ * Fch Oem setting callback
+ *
+ * Configure platform specific Hudson device,
+ * such Azalia, SATA, IMC etc.
+ */
+static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
+{
+ AMD_CONFIG_PARAMS *StdHeader = (AMD_CONFIG_PARAMS *)ConfigPtr;
+ if (StdHeader->Func == AMD_INIT_RESET) {
+ FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *) FchData;
+ printk(BIOS_DEBUG, "Fch OEM config in INIT RESET ");
+ //FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */
+ FchParams->LegacyFree = CONFIG_HUDSON_LEGACY_FREE;
+ FchParams->FchReset.SataEnable = hudson_sata_enable();
+ FchParams->FchReset.IdeEnable = hudson_ide_enable();
+ FchParams->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
+ FchParams->FchReset.Xhci1Enable = FALSE;
+ } else if (StdHeader->Func == AMD_INIT_ENV) {
+ FCH_DATA_BLOCK *FchParams = (FCH_DATA_BLOCK *)FchData;
+ printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
+
+ /* Azalia Controller OEM Codec Table Pointer */
+ FchParams->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]);
+ /* Azalia Controller Front Panel OEM Table Pointer */
+
+ /* Fan Control */
+ oem_fan_control(FchParams);
+
+ /* XHCI configuration */
+ FchParams->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
+ FchParams->Usb.Xhci1Enable = FALSE;
+
+ /* sata configuration */
+ FchParams->Sata.SataClass = CONFIG_HUDSON_SATA_MODE;
+ switch ((SATA_CLASS)CONFIG_HUDSON_SATA_MODE) {
+ case SataRaid:
+ case SataAhci:
+ case SataAhci7804:
+ case SataLegacyIde:
+ FchParams->Sata.SataIdeMode = FALSE;
+ break;
+ case SataIde2Ahci:
+ case SataIde2Ahci7804:
+ default: /* SataNativeIde */
+ FchParams->Sata.SataIdeMode = TRUE;
+ break;
+ }
+ }
+ printk(BIOS_DEBUG, "Done\n");
+
+ return AGESA_SUCCESS;
+}
+
+static AGESA_STATUS board_ReadSpd_from_cbfs(UINT32 Func, UINTN Data, VOID *ConfigPtr)
+{
+ AGESA_STATUS Status = AGESA_UNSUPPORTED;
+#ifdef __PRE_RAM__
+ AGESA_READ_SPD_PARAMS *info = ConfigPtr;
+ u8 index = 0; // Default lowest speed (DDR3-800)
+
+ if (IS_ENABLED(CONFIG_BAP_E21_DDR3_800))
+ index = 0;
+ else if (IS_ENABLED(CONFIG_BAP_E21_DDR3_1066))
+ index = 1;
+ else if (IS_ENABLED(CONFIG_BAP_E21_DDR3_1333))
+ index = 2;
+
+ if (info->MemChannelId > 0)
+ return AGESA_UNSUPPORTED;
+ if (info->SocketId != 0)
+ return AGESA_UNSUPPORTED;
+ if (info->DimmId != 0)
+ return AGESA_UNSUPPORTED;
+
+ /* Uses index, to jump inside the spd.bin file. */
+ if (read_spd_from_cbfs((u8*)info->Buffer, index) < 0)
+ die("No SPD data\n");
+
+ Status = AGESA_SUCCESS;
+#endif
+ return Status;
+}
diff --git a/src/mainboard/bap/ode_e21XX/Kconfig b/src/mainboard/bap/ode_e21XX/Kconfig
new file mode 100644
index 0000000..6b747f2
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/Kconfig
@@ -0,0 +1,77 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+if BOARD_ODE_E21XX
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select CPU_AMD_PI_00730F01
+ select NORTHBRIDGE_AMD_PI_00730F01
+ select SOUTHBRIDGE_AMD_PI_AVALON
+ select HAVE_OPTION_TABLE
+ select HAVE_PIRQ_TABLE
+ select HAVE_MP_TABLE
+ select HAVE_ACPI_TABLES
+ select BOARD_ROMSIZE_KB_8192
+ select GFXUMA
+ select SUPERIO_FINTEK_F81866D
+ select SPD_CACHE
+
+config MAINBOARD_DIR
+ string
+ default bap/ode_e21XX
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "ODE_E21XX"
+
+config MAX_CPUS
+ int
+ default 4
+
+config IRQ_SLOT_COUNT
+ int
+ default 11
+
+config ONBOARD_VGA_IS_PRIMARY
+ bool
+ default y
+
+config HUDSON_LEGACY_FREE
+ bool
+ default y
+
+choice
+ prompt "Select DDR3 clock"
+ default BAP_E21_DDR3_1333
+ help
+ Select your preferenced DDR3 clock setting
+
+ Note: This option changes the total power consumption
+
+ If unsure, use DDR3-1333
+
+config BAP_E21_DDR3_800
+ bool "Select DDR3-800"
+
+config BAP_E21_DDR3_1066
+ bool "Select DDR3-1066"
+
+config BAP_E21_DDR3_1333
+ bool "Select DDR3-1333"
+
+endchoice
+
+endif # BOARD_ODE_E21XX
diff --git a/src/mainboard/bap/ode_e21XX/Kconfig.name b/src/mainboard/bap/ode_e21XX/Kconfig.name
new file mode 100644
index 0000000..5ef8804
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/Kconfig.name
@@ -0,0 +1,2 @@
+config BOARD_ODE_E21XX
+ bool "ODE_e21xx"
diff --git a/src/mainboard/bap/ode_e21XX/Makefile.inc b/src/mainboard/bap/ode_e21XX/Makefile.inc
new file mode 100644
index 0000000..4f4a11d
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/Makefile.inc
@@ -0,0 +1,40 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+romstage-y += BiosCallOuts.c
+romstage-y += OemCustomize.c
+
+ramstage-y += BiosCallOuts.c
+ramstage-y += OemCustomize.c
+
+## DIMM SPD for on-board memory
+SPD_BIN = $(obj)/spd.bin
+
+# Order of names in SPD_SOURCES is important!
+SPD_SOURCES = BAP_Q7_800 BAP_Q7_1066 BAP_Q7_1333
+
+SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/$(f).spd.hex)
+
+# Include spd rom data
+$(SPD_BIN): $(SPD_DEPS)
+ for f in $+; \
+ do for c in $$(cat $$f | grep -v ^#); \
+ do printf $$(printf '\%o' 0x$$c); \
+ done; \
+ done > $@
+
+cbfs-files-y += spd.bin
+spd.bin-file := $(SPD_BIN)
+spd.bin-type := spd
diff --git a/src/mainboard/bap/ode_e21XX/OemCustomize.c b/src/mainboard/bap/ode_e21XX/OemCustomize.c
new file mode 100644
index 0000000..3750ba4
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/OemCustomize.c
@@ -0,0 +1,106 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <northbridge/amd/pi/agesawrapper.h>
+
+#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE
+
+static const PCIe_PORT_DESCRIPTOR PortList [] = {
+ /* Initialize Port descriptor (PCIe port, Lanes 2-3, PCI Device 2, Function 4) */
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 2, 3),
+ PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 4,
+ HotplugDisabled,
+ PcieGenMaxSupported,
+ PcieGenMaxSupported,
+ AspmDisabled, 0x02, 0)
+ },
+ /* Initialize Port descriptor (PCIe port, Lane 1, PCI Device 2, Function 3) */
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 1, 1),
+ PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 3,
+ HotplugDisabled,
+ PcieGenMaxSupported,
+ PcieGenMaxSupported,
+ AspmDisabled, 0x03, 0)
+ },
+ /* Initialize Port descriptor (PCIe port, Lane 0, PCI Device 2, Function 2) */
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 0),
+ PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 2,
+ HotplugDisabled,
+ PcieGenMaxSupported,
+ PcieGenMaxSupported,
+ AspmDisabled, 0x04, 0)
+ },
+ /* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device 2, Function 1) */
+ {
+ DESCRIPTOR_TERMINATE_LIST,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 7),
+ PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 1,
+ HotplugDisabled,
+ PcieGenMaxSupported,
+ PcieGenMaxSupported,
+ AspmDisabled, 0x05, 0)
+ }
+};
+
+static const PCIe_DDI_DESCRIPTOR DdiList [] = {
+ /* eDP0 to LVDS connector */
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1)
+ },
+ /* DP1 to HDMI */
+ {
+ DESCRIPTOR_TERMINATE_LIST,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2)
+ },
+};
+
+static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = {
+ .Flags = DESCRIPTOR_TERMINATE_LIST,
+ .SocketId = 0,
+ .PciePortList = PortList,
+ .DdiLinkList = DdiList
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * OemCustomizeInitEarly
+ *
+ * Description:
+ * This stub function will call the host environment through the binary block
+ * interface (call-out port) to provide a user hook opportunity
+ *
+ * Parameters:
+ * @param[in] *InitEarly
+ *
+ * @retval VOID
+ *
+ **/
+/*---------------------------------------------------------------------------------------*/
+VOID
+OemCustomizeInitEarly (
+ IN OUT AMD_EARLY_PARAMS *InitEarly
+ )
+{
+ InitEarly->GnbConfig.PcieComplexList = &PcieComplex;
+}
diff --git a/src/mainboard/bap/ode_e21XX/acpi/AmdImc.asl b/src/mainboard/bap/ode_e21XX/acpi/AmdImc.asl
new file mode 100644
index 0000000..d3bb74e
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/acpi/AmdImc.asl
@@ -0,0 +1,109 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+OperationRegion(IMIO, SystemIO, 0x3E, 0x02)
+Field(IMIO , ByteAcc, NoLock, Preserve) {
+ IMCX,8,
+ IMCA,8
+}
+
+IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) {
+ Offset(0x80),
+ MSTI, 8,
+ MITS, 8,
+ MRG0, 8,
+ MRG1, 8,
+ MRG2, 8,
+ MRG3, 8,
+}
+
+Method(WACK, 0)
+{
+ Store(0, Local0)
+ While (LNotEqual(Local0, 0xFA)) {
+ Store(MRG0, Local0)
+ Sleep(10)
+ }
+}
+
+//Init
+Method (ITZE, 0)
+{
+ Store(0, MRG0)
+ Store(0xB5, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(0, MRG2)
+ Store(0x80, MSTI)
+ WACK()
+
+ Or(MRG2, 0x01, Local0)
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(Local0, MRG2)
+ Store(0x81, MSTI)
+ WACK()
+}
+
+//Sleep
+Method (IMSP, 0)
+{
+ Store(0, MRG0)
+ Store(0xB5, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(1, MRG1)
+ Store(0, MRG2)
+ Store(0x98, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(0xB4, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+}
+
+//Wake
+Method (IMWK, 0)
+{
+ Store(0, MRG0)
+ Store(0xB5, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(0, MRG2)
+ Store(0x80, MSTI)
+ WACK()
+
+ Or(MRG2, 0x01, Local0)
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(Local0, MRG2)
+ Store(0x81, MSTI)
+ WACK()
+}
diff --git a/src/mainboard/bap/ode_e21XX/acpi/gpe.asl b/src/mainboard/bap/ode_e21XX/acpi/gpe.asl
new file mode 100644
index 0000000..9a84698
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/acpi/gpe.asl
@@ -0,0 +1,74 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+Scope(\_GPE) { /* Start Scope GPE */
+
+ /* General event 3 */
+ Method(_L03) {
+ /* DBGO("\\_GPE\\_L00\n") */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* Legacy PM event */
+ Method(_L08) {
+ /* DBGO("\\_GPE\\_L08\n") */
+ }
+
+ /* Temp warning (TWarn) event */
+ Method(_L09) {
+ /* DBGO("\\_GPE\\_L09\n") */
+ /* Notify (\_TZ.TZ00, 0x80) */
+ }
+
+ /* USB controller PME# */
+ Method(_L0B) {
+ /* DBGO("\\_GPE\\_L0B\n") */
+ Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.XHC0, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* ExtEvent0 SCI event */
+ Method(_L10) {
+ /* DBGO("\\_GPE\\_L10\n") */
+ }
+
+ /* ExtEvent1 SCI event */
+ Method(_L11) {
+ /* DBGO("\\_GPE\\_L11\n") */
+ }
+
+ /* GPIO0 or GEvent8 event */
+ Method(_L18) {
+ /* DBGO("\\_GPE\\_L18\n") */
+ Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* Azalia SCI event */
+ Method(_L1B) {
+ /* DBGO("\\_GPE\\_L1B\n") */
+ Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+} /* End Scope GPE */
diff --git a/src/mainboard/bap/ode_e21XX/acpi/ide.asl b/src/mainboard/bap/ode_e21XX/acpi/ide.asl
new file mode 100644
index 0000000..4a3eac8
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/acpi/ide.asl
@@ -0,0 +1,2 @@
+/* No license required */
+/* No IDE functionality */
diff --git a/src/mainboard/bap/ode_e21XX/acpi/mainboard.asl b/src/mainboard/bap/ode_e21XX/acpi/mainboard.asl
new file mode 100644
index 0000000..0141481
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/acpi/mainboard.asl
@@ -0,0 +1,37 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Memory related values */
+Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
+Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+Name(PBLN, 0x0) /* Length of BIOS area */
+
+Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */
+Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */
+Name(HPBA, 0xFED00000) /* Base address of HPET table */
+
+Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+/* Some global data */
+Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+Name(OSV, Ones) /* Assume nothing */
+Name(PMOD, One) /* Assume APIC */
+
+/* AcpiGpe0Blk */
+OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04)
+ Field(GP0B, ByteAcc, NoLock, Preserve) {
+ , 11,
+ USBS, 1,
+}
diff --git a/src/mainboard/bap/ode_e21XX/acpi/routing.asl b/src/mainboard/bap/ode_e21XX/acpi/routing.asl
new file mode 100644
index 0000000..7cb7a2f
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/acpi/routing.asl
@@ -0,0 +1,193 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+ )
+ {
+ #include "routing.asl"
+ }
+*/
+
+/* Routing is in System Bus scope */
+Name(PR0, Package(){
+ /* NB devices */
+ /* Bus 0, Dev 0 - F16 Host Controller */
+
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+ /* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */
+ Package(){0x0001FFFF, 0, INTB, 0 },
+ Package(){0x0001FFFF, 1, INTC, 0 },
+
+
+ /* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */
+ Package(){0x0002FFFF, 0, INTC, 0 },
+ Package(){0x0002FFFF, 1, INTD, 0 },
+ Package(){0x0002FFFF, 2, INTA, 0 },
+ Package(){0x0002FFFF, 3, INTB, 0 },
+
+ /* FCH devices */
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */
+ Package(){0x0014FFFF, 0, INTA, 0 },
+ Package(){0x0014FFFF, 1, INTB, 0 },
+ Package(){0x0014FFFF, 2, INTC, 0 },
+ Package(){0x0014FFFF, 3, INTD, 0 },
+
+ /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */
+ /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */
+ Package(){0x0012FFFF, 0, INTC, 0 },
+ Package(){0x0012FFFF, 1, INTB, 0 },
+
+ Package(){0x0013FFFF, 0, INTC, 0 },
+ Package(){0x0013FFFF, 1, INTB, 0 },
+
+ Package(){0x0016FFFF, 0, INTC, 0 },
+ Package(){0x0016FFFF, 1, INTB, 0 },
+
+ /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */
+ Package(){0x0010FFFF, 0, INTC, 0 },
+ Package(){0x0010FFFF, 1, INTB, 0 },
+
+ /* Bus 0, Dev 17 - SATA controller */
+ Package(){0x0011FFFF, 0, INTD, 0 },
+
+})
+
+Name(APR0, Package(){
+ /* NB devices in APIC mode */
+ /* Bus 0, Dev 0 - F15 Host Controller */
+
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+ Package(){0x0001FFFF, 0, 0, 44 },
+ Package(){0x0001FFFF, 1, 0, 45 },
+
+ /* Bus 0, Dev 2 - PCIe Bridges */
+ Package(){0x0002FFFF, 0, 0, 24 },
+ Package(){0x0002FFFF, 1, 0, 25 },
+ Package(){0x0002FFFF, 2, 0, 26 },
+ Package(){0x0002FFFF, 3, 0, 27 },
+
+
+ /* SB devices in APIC mode */
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */
+ Package(){0x0014FFFF, 0, 0, 16 },
+ Package(){0x0014FFFF, 1, 0, 17 },
+ Package(){0x0014FFFF, 2, 0, 18 },
+ Package(){0x0014FFFF, 3, 0, 19 },
+
+ /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */
+ /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */
+ Package(){0x0012FFFF, 0, 0, 18 },
+ Package(){0x0012FFFF, 1, 0, 17 },
+
+ Package(){0x0013FFFF, 0, 0, 18 },
+ Package(){0x0013FFFF, 1, 0, 17 },
+
+ Package(){0x0016FFFF, 0, 0, 18 },
+ Package(){0x0016FFFF, 1, 0, 17 },
+
+ /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */
+ Package(){0x0010FFFF, 0, 0, 0x12},
+ Package(){0x0010FFFF, 1, 0, 0x11},
+
+ /* Bus 0, Dev 17 - SATA controller */
+ Package(){0x0011FFFF, 0, 0, 19 },
+
+})
+
+Name(PS2, Package(){
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+})
+Name(APS2, Package(){
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+})
+
+/* GFX */
+Name(PS4, Package(){
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+})
+Name(APS4, Package(){
+ /* PCIe slot - Hooked to PCIe slot 4 */
+ Package(){0x0000FFFF, 0, 0, 24 },
+ Package(){0x0000FFFF, 1, 0, 25 },
+ Package(){0x0000FFFF, 2, 0, 26 },
+ Package(){0x0000FFFF, 3, 0, 27 },
+})
+
+/* GPP 0 */
+Name(PS5, Package(){
+ Package(){0x0000FFFF, 0, INTB, 0 },
+ Package(){0x0000FFFF, 1, INTC, 0 },
+ Package(){0x0000FFFF, 2, INTD, 0 },
+ Package(){0x0000FFFF, 3, INTA, 0 },
+})
+Name(APS5, Package(){
+ Package(){0x0000FFFF, 0, 0, 28 },
+ Package(){0x0000FFFF, 1, 0, 29 },
+ Package(){0x0000FFFF, 2, 0, 30 },
+ Package(){0x0000FFFF, 3, 0, 31 },
+})
+
+/* GPP 1 */
+Name(PS6, Package(){
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+})
+Name(APS6, Package(){
+ Package(){0x0000FFFF, 0, 0, 32 },
+ Package(){0x0000FFFF, 1, 0, 33 },
+ Package(){0x0000FFFF, 2, 0, 34 },
+ Package(){0x0000FFFF, 3, 0, 35 },
+})
+
+/* GPP 2 */
+Name(PS7, Package(){
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+})
+Name(APS7, Package(){
+ Package(){0x0000FFFF, 0, 0, 36 },
+ Package(){0x0000FFFF, 1, 0, 37 },
+ Package(){0x0000FFFF, 2, 0, 38 },
+ Package(){0x0000FFFF, 3, 0, 39 },
+})
+
+/* GPP 3 */
+Name(PS8, Package(){
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+})
+Name(APS8, Package(){
+ Package(){0x0000FFFF, 0, 0, 40 },
+ Package(){0x0000FFFF, 1, 0, 41 },
+ Package(){0x0000FFFF, 2, 0, 42 },
+ Package(){0x0000FFFF, 3, 0, 43 },
+})
diff --git a/src/mainboard/bap/ode_e21XX/acpi/si.asl b/src/mainboard/bap/ode_e21XX/acpi/si.asl
new file mode 100644
index 0000000..2923471
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/acpi/si.asl
@@ -0,0 +1,23 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+Scope(\_SI) {
+ Method(_SST, 1) {
+ /* DBGO("\\_SI\\_SST\n") */
+ /* DBGO(" New Indicator state: ") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+ }
+} /* End Scope SI */
diff --git a/src/mainboard/bap/ode_e21XX/acpi/sleep.asl b/src/mainboard/bap/ode_e21XX/acpi/sleep.asl
new file mode 100644
index 0000000..0734c8e
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/acpi/sleep.asl
@@ -0,0 +1,95 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Wake status package */
+Name(WKST,Package(){Zero, Zero})
+
+/*
+* \_PTS - Prepare to Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2, etc
+*
+* Exit:
+* -none-
+*
+* The _PTS control method is executed at the beginning of the sleep process
+* for S1-S5. The sleeping value is passed to the _PTS control method. This
+* control method may be executed a relatively long time before entering the
+* sleep state and the OS may abort the operation without notification to
+* the ACPI driver. This method cannot modify the configuration or power
+* state of any device in the system.
+*/
+
+External(\_SB.APTS, MethodObj)
+External(\_SB.AWAK, MethodObj)
+
+Method(_PTS, 1) {
+ /* DBGO("\\_PTS\n") */
+ /* DBGO("From S0 to S") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+
+ /* Clear wake status structure. */
+ Store(0, Index(WKST,0))
+ Store(0, Index(WKST,1))
+ Store(7, UPWS)
+ \_SB.APTS(Arg0)
+} /* End Method(\_PTS) */
+
+/*
+* \_BFS OEM Back From Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* -none-
+*/
+Method(\_BFS, 1) {
+ /* DBGO("\\_BFS\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+}
+
+/*
+* \_WAK System Wake method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* Return package of 2 DWords
+* Dword 1 - Status
+* 0x00000000 wake succeeded
+* 0x00000001 Wake was signaled but failed due to lack of power
+* 0x00000002 Wake was signaled but failed due to thermal condition
+* Dword 2 - Power Supply state
+* if non-zero the effective S-state the power supply entered
+*/
+Method(\_WAK, 1) {
+ /* DBGO("\\_WAK\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+
+ /* clear USB wake up signal */
+ Store(1, USBS)
+
+ \_SB.AWAK(Arg0)
+
+ Return(WKST)
+} /* End Method(\_WAK) */
diff --git a/src/mainboard/bap/ode_e21XX/acpi/superio.asl b/src/mainboard/bap/ode_e21XX/acpi/superio.asl
new file mode 100644
index 0000000..92bd106
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/acpi/superio.asl
@@ -0,0 +1,48 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ * Copyright (C) 2015 BAP - Bruhnspace Advanced Projects
+ * (Written by Fabian Kunkel <fabi at adv.bruhnspace.com> for BAP)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* SuperIO support for Windows */
+
+Device (UAR1) {
+ Name (_HID, EISAID ("PNP0501"))
+ Name (_UID, 1)
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x03F8, 0x03F8, 0x08, 0x08)
+ IRQNoFlags () {4}
+ })
+ Name (_PRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x03F8, 0x03F8, 0x08, 0x08)
+ IRQNoFlags () {4}
+ })
+}
+
+Device (UAR2) {
+ Name (_HID, EISAID ("PNP0501"))
+ Name (_UID, 2)
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x02F8, 0x02F8, 0x08, 0x08)
+ IRQNoFlags () {3}
+ })
+ Name (_PRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x02F8, 0x02F8, 0x08, 0x08)
+ IRQNoFlags () {3}
+ })
+}
diff --git a/src/mainboard/bap/ode_e21XX/acpi/thermal.asl b/src/mainboard/bap/ode_e21XX/acpi/thermal.asl
new file mode 100644
index 0000000..73077ac
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/acpi/thermal.asl
@@ -0,0 +1,2 @@
+/* No license required */
+/* No thermal zone functionality */
diff --git a/src/mainboard/bap/ode_e21XX/acpi/usb_oc.asl b/src/mainboard/bap/ode_e21XX/acpi/usb_oc.asl
new file mode 100644
index 0000000..1643fe7
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/acpi/usb_oc.asl
@@ -0,0 +1,36 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* simple name description */
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+ )
+ {
+ #include "usb.asl"
+ }
+*/
+
+/* USB overcurrent mapping pins. */
+Name(UOM0, 0)
+Name(UOM1, 2)
+Name(UOM2, 0)
+Name(UOM3, 7)
+Name(UOM4, 2)
+Name(UOM5, 2)
+Name(UOM6, 6)
+Name(UOM7, 2)
+Name(UOM8, 6)
+Name(UOM9, 6)
diff --git a/src/mainboard/bap/ode_e21XX/acpi_tables.c b/src/mainboard/bap/ode_e21XX/acpi_tables.c
new file mode 100644
index 0000000..d5ebad4
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/acpi_tables.c
@@ -0,0 +1,56 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <northbridge/amd/pi/agesawrapper.h>
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/ioapic.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam16.h>
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write SB800 IOAPIC, only one */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS,
+ IO_APIC_ADDR, 0);
+
+ /* TODO: Remove the hardcode */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1,
+ 0xFEC20000, 24);
+
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0);
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, 0xF);
+ /* 0: mean bus 0--->ISA */
+ /* 0: PIC 0 */
+ /* 2: APIC 2 */
+ /* 5 mean: 0101 --> Edge-triggered, Active high */
+
+ /* create all subtables for processors */
+ current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1);
+ /* 1: LINT1 connect to NMI */
+
+ return current;
+}
diff --git a/src/mainboard/bap/ode_e21XX/board_info.txt b/src/mainboard/bap/ode_e21XX/board_info.txt
new file mode 100644
index 0000000..dffb350
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/board_info.txt
@@ -0,0 +1,6 @@
+Board name: ODE_e21xx
+Board URL: http://www.unibap.com/advanced-heterogeneous-computing-modules/
+Category: eval
+ROM protocol: SPI
+ROM socketed: n
+Flashrom support: y
diff --git a/src/mainboard/bap/ode_e21XX/cmos.layout b/src/mainboard/bap/ode_e21XX/cmos.layout
new file mode 100644
index 0000000..d83bb14
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/cmos.layout
@@ -0,0 +1,74 @@
+#*****************************************************************************
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#*****************************************************************************
+
+entries
+
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 multi_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+456 1 e 1 ECC_memory
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 amd_reserved
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+8 0 400Mhz
+8 1 333Mhz
+8 2 266Mhz
+8 3 200Mhz
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
diff --git a/src/mainboard/bap/ode_e21XX/devicetree.cb b/src/mainboard/bap/ode_e21XX/devicetree.cb
new file mode 100644
index 0000000..1a900c0
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/devicetree.cb
@@ -0,0 +1,116 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2013 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+chip northbridge/amd/pi/00730F01/root_complex
+ device cpu_cluster 0 on
+ chip cpu/amd/pi/00730F01
+ device lapic 0 on end
+ end
+ end
+
+ device domain 0 on
+ subsystemid 0x1022 0x1410 inherit
+ chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
+
+ chip northbridge/amd/pi/00730F01 # PCI side of HT root complex
+ device pci 0.0 on end # Root Complex
+ device pci 0.2 off end # IOMMU
+ device pci 1.0 on end # Internal Graphics P2P bridge 0x9804
+ device pci 1.1 on end # Internal Multimedia
+ device pci 2.0 on end # PCIe Host Bridge
+ device pci 2.1 on end # x4 PCIe slot
+ device pci 2.2 on end # PCIe Q7 Realtek GBit LAN
+ device pci 2.3 on end # PCIe CB Realtek GBit LAN
+ device pci 2.4 on end # PCIe x2 BAP FPGA
+ device pci 8.0 on end # Platform Security Processor
+ end #chip northbridge/amd/pi/00730F01
+
+ chip southbridge/amd/pi/hudson # it is under NB/SB Link, but on the same pci bus
+ device pci 10.0 on end # XHCI HC0
+ device pci 11.0 on end # SATA
+ device pci 12.0 on end # EHCI #0
+ device pci 13.0 on end # EHCI #1
+ device pci 14.0 on end # SMBus
+ device pci 14.2 on end # HDA 0x4383
+ device pci 14.3 on # LPC 0x439d
+ chip superio/fintek/f81866d
+ register "hwm_amd_tsi_addr" = "0x98" # Set to AMD
+ register "hwm_amd_tsi_control" = "0x02" # Set to AMD
+ register "hwm_fan_select" = "0xC0" # Sets Fan2 to PWM
+ register "hwm_fan_mode" = "0xD5" # Sets FAN1-3 to Auto RPM mode
+ register "hwm_fan3_control" = "0x00" # Fan control 23kHz
+ register "hwm_fan2_temp_map_select" = "0x1E" # Fan control 23kHz
+ register "hwm_fan2_bound1" = "0x3C" # 60°C
+ register "hwm_fan2_bound2" = "0x32" # 50°C
+ register "hwm_fan2_bound3" = "0x28" # 40°C
+ register "hwm_fan2_bound4" = "0x1E" # 30°C
+ register "hwm_fan2_seg1_speed" = "0xFF" # 100%
+ register "hwm_fan2_seg2_speed" = "0xD9" # 85%
+ register "hwm_fan2_seg3_speed" = "0xB2" # 70%
+ register "hwm_fan2_seg4_speed" = "0x99" # 60%
+ register "hwm_fan2_seg5_speed" = "0x80" # 50%
+ register "hwm_temp_sens_type" = "0x04" # Sets temp sensor 1 type to to thermistor
+ device pnp 4e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 4e.3 off end # Parallel Port
+ device pnp 4e.4 on # Hardware Monitor
+ io 0x60 = 0x295
+ irq 0x70 = 0
+ end
+ device pnp 4e.5 off # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ device pnp 4e.6 off end # GPIO
+ device pnp 4e.7 on end # WDT
+ device pnp 4e.a off end # PME
+ device pnp 4e.10 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 4e.11 on # COM2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 4e.12 off # COM3
+ io 0x60 = 0x3e8
+ irq 0x70 = 4
+ end
+ device pnp 4e.13 off # COM4
+ io 0x60 = 0x2e8
+ irq 0x70 = 3
+ end
+ device pnp 4e.14 off # COM5
+ end
+ device pnp 4e.15 off # COM6
+ end
+ end # f81866d
+ end #LPC
+ device pci 14.7 on end # SD
+ end #chip southbridge/amd/pi/hudson
+
+ device pci 18.0 on end
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ device pci 18.4 on end
+ device pci 18.5 on end
+
+ end #chip northbridge/amd/pi/00730F01 # CPU side of HT root complex
+ end #domain
+end #northbridge/amd/pi/00730F01/root_complex
diff --git a/src/mainboard/bap/ode_e21XX/dsdt.asl b/src/mainboard/bap/ode_e21XX/dsdt.asl
new file mode 100644
index 0000000..5bb751c
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/dsdt.asl
@@ -0,0 +1,89 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+ "DSDT.AML", /* Output filename */
+ "DSDT", /* Signature */
+ 0x02, /* DSDT Revision, needs to be 2 for 64bit */
+ "AMD ", /* OEMID */
+ "COREBOOT", /* TABLE ID */
+ 0x00010001 /* OEM Revision */
+ )
+{ /* Start of ASL file */
+ /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */
+
+ /* Globals for the platform */
+ #include "acpi/mainboard.asl"
+
+ /* Describe the USB Overcurrent pins */
+ #include "acpi/usb_oc.asl"
+
+ /* PCI IRQ mapping for the Southbridge */
+ #include <southbridge/amd/pi/hudson/acpi/pcie.asl>
+
+ /* Describe the processor tree (\_PR) */
+ #include <cpu/amd/pi/00730F01/acpi/cpu.asl>
+
+ /* Contains the supported sleep states for this chipset */
+ #include <southbridge/amd/pi/hudson/acpi/sleepstates.asl>
+
+ /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */
+ #include "acpi/sleep.asl"
+
+ /* System Bus */
+ Scope(\_SB) { /* Start \_SB scope */
+ /* global utility methods expected within the \_SB scope */
+ #include <arch/x86/acpi/globutil.asl>
+
+ /* Describe IRQ Routing mapping for this platform (within the \_SB scope) */
+ #include "acpi/routing.asl"
+
+ Device(PWRB) {
+ Name(_HID, EISAID("PNP0C0C"))
+ Name(_UID, 0xAA)
+ Name(_PRW, Package () {3, 0x04})
+ Name(_STA, 0x0B)
+ }
+
+ Device(PCI0) {
+ /* Describe the AMD Northbridge */
+ #include <northbridge/amd/pi/00730F01/acpi/northbridge.asl>
+
+ /* Describe the AMD Fusion Controller Hub Southbridge */
+ #include <southbridge/amd/pi/hudson/acpi/fch.asl>
+ /* Adds UART support for Windows */
+ #include "acpi/superio.asl"
+ }
+
+ /* Describe PCI INT[A-H] for the Southbridge */
+ #include <southbridge/amd/pi/hudson/acpi/pci_int.asl>
+
+ } /* End \_SB scope */
+
+ /* Describe SMBUS for the Southbridge */
+ #include <southbridge/amd/pi/hudson/acpi/smbus.asl>
+
+ /* Define the General Purpose Events for the platform */
+ #include "acpi/gpe.asl"
+
+ /* Define the Thermal zones and methods for the platform */
+ #include "acpi/thermal.asl"
+
+ /* Define the System Indicators for the platform */
+ #include "acpi/si.asl"
+}
+/* End of ASL file */
diff --git a/src/mainboard/bap/ode_e21XX/irq_tables.c b/src/mainboard/bap/ode_e21XX/irq_tables.c
new file mode 100644
index 0000000..c48a445
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/irq_tables.c
@@ -0,0 +1,103 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+#include <cpu/amd/amdfam16.h>
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+ u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+ u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+ u8 slot, u8 rfu)
+{
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
+}
+
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ struct irq_routing_table *pirq;
+ struct irq_info *pirq_info;
+ u32 slot_num;
+ u8 *v;
+
+ u8 sum = 0;
+ int i;
+
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
+
+ /* This table must be between 0xf0000 & 0x100000 */
+ printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+ pirq = (void *)(addr);
+ v = (u8 *) (addr);
+
+ pirq->signature = PIRQ_SIGNATURE;
+ pirq->version = PIRQ_VERSION;
+
+ pirq->rtr_bus = 0;
+ pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
+
+ pirq->exclusive_irqs = 0;
+
+ pirq->rtr_vendor = 0x1002;
+ pirq->rtr_device = 0x4384;
+
+ pirq->miniport_data = 0;
+
+ memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+ pirq_info = (void *)(&pirq->checksum + 1);
+ slot_num = 0;
+
+ /* pci bridge */
+ write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4),
+ 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+ 0);
+ pirq_info++;
+
+ slot_num++;
+
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
+
+ sum = pirq->checksum - sum;
+
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
+
+ printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+ return (unsigned long)pirq_info;
+}
diff --git a/src/mainboard/bap/ode_e21XX/mainboard.c b/src/mainboard/bap/ode_e21XX/mainboard.c
new file mode 100644
index 0000000..1e82768
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/mainboard.c
@@ -0,0 +1,41 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <device/pci_def.h>
+#include <arch/acpi.h>
+#include <northbridge/amd/pi/BiosCallOuts.h>
+#include <cpu/amd/pi/s3_resume.h>
+#include <northbridge/amd/pi/agesawrapper.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+
+/**********************************************
+ * enable the dedicated function in mainboard.
+ **********************************************/
+static void mainboard_enable(device_t dev)
+{
+ printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+
+ if (acpi_is_wakeup_s3())
+ agesawrapper_fchs3earlyrestore();
+}
+
+struct chip_operations mainboard_ops = {
+ .enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/bap/ode_e21XX/mptable.c b/src/mainboard/bap/ode_e21XX/mptable.c
new file mode 100644
index 0000000..a2ba7f4
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/mptable.c
@@ -0,0 +1,190 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <arch/ioapic.h>
+#include <string.h>
+#include <stdint.h>
+#include <cpu/amd/amdfam15.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <southbridge/amd/pi/hudson/hudson.h>
+
+u8 picr_data[0x54] = {
+ 0x03,0x04,0x05,0x07,0x0B,0x0A,0x1F,0x1F,0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ 0x1F,0x1F,0x1F,0x03,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x05,0x04,0x05,0x04,0x04,0x05,0x04,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x04,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x03,0x04,0x05,0x07
+};
+u8 intr_data[0x54] = {
+ 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x10,0x11,0x12,0x13
+};
+
+static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length)
+{
+ mc->mpc_length += length;
+ mc->mpc_entry_count++;
+}
+
+static void my_smp_write_bus(struct mp_config_table *mc,
+ unsigned char id, const char *bustype)
+{
+ struct mpc_config_bus *mpc;
+ mpc = smp_next_mpc_entry(mc);
+ memset(mpc, '\0', sizeof(*mpc));
+ mpc->mpc_type = MP_BUS;
+ mpc->mpc_busid = id;
+ memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype));
+ smp_add_mpc_entry(mc, sizeof(*mpc));
+}
+
+static void *smp_write_config_table(void *v)
+{
+ struct mp_config_table *mc;
+ int bus_isa;
+ u8 byte;
+
+ /*
+ * By the time this function gets called, the IOAPIC registers
+ * have been written so they can be read to get the correct
+ * APIC ID and Version
+ */
+ u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24);
+ u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF);
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+
+ mptable_init(mc, LOCAL_APIC_ADDR);
+ memcpy(mc->mpc_oem, "AMD ", 8);
+
+ smp_write_processors(mc);
+
+ //mptable_write_buses(mc, NULL, &bus_isa);
+ my_smp_write_bus(mc, 0, "PCI ");
+ my_smp_write_bus(mc, 1, "PCI ");
+ bus_isa = 0x02;
+ my_smp_write_bus(mc, bus_isa, "ISA ");
+
+ /* I/O APICs: APIC ID Version State Address */
+ smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR);
+
+ smp_write_ioapic(mc, ioapic_id+1, 0x21, (void *)0xFEC20000);
+ /* PIC IRQ routine */
+ for (byte = 0x0; byte < sizeof(picr_data); byte ++) {
+ outb(byte, 0xC00);
+ outb(picr_data[byte], 0xC01);
+ }
+
+ /* APIC IRQ routine */
+ for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
+ outb(byte | 0x80, 0xC00);
+ outb(intr_data[byte], 0xC01);
+ }
+ /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+ smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+ mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0);
+
+ /* PCI interrupts are level triggered, and are
+ * associated with a specific bus/device/function tuple.
+ */
+#define PCI_INT(bus, dev, int_sign, pin) \
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), ioapic_id, (pin))
+
+ /* Internal VGA */
+ PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]);
+ PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]);
+
+ /* SMBUS */
+ PCI_INT(0x0, 0x14, 0x0, 0x10);
+
+ /* HD Audio */
+ PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]);
+
+ /* USB */
+ PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]);
+ PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
+ PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
+ PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
+ PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
+ PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
+ PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]);
+
+ /* sata */
+ PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]);
+ PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
+
+ /* on board NIC & Slot PCIE. */
+
+ /* PCI slots */
+ device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
+ if (dev && dev->enabled) {
+ u8 bus_pci = dev->link_list->secondary;
+ /* PCI_SLOT 0. */
+ PCI_INT(bus_pci, 0x5, 0x0, 0x14);
+ PCI_INT(bus_pci, 0x5, 0x1, 0x15);
+ PCI_INT(bus_pci, 0x5, 0x2, 0x16);
+ PCI_INT(bus_pci, 0x5, 0x3, 0x17);
+
+ /* PCI_SLOT 1. */
+ PCI_INT(bus_pci, 0x6, 0x0, 0x15);
+ PCI_INT(bus_pci, 0x6, 0x1, 0x16);
+ PCI_INT(bus_pci, 0x6, 0x2, 0x17);
+ PCI_INT(bus_pci, 0x6, 0x3, 0x14);
+
+ /* PCI_SLOT 2. */
+ PCI_INT(bus_pci, 0x7, 0x0, 0x16);
+ PCI_INT(bus_pci, 0x7, 0x1, 0x17);
+ PCI_INT(bus_pci, 0x7, 0x2, 0x14);
+ PCI_INT(bus_pci, 0x7, 0x3, 0x15);
+ }
+
+ /* PCIe Lan*/
+ PCI_INT(0x0, 0x06, 0x0, 0x13);
+
+ /* FCH PCIe PortA */
+ PCI_INT(0x0, 0x15, 0x0, 0x10);
+ /* FCH PCIe PortB */
+ PCI_INT(0x0, 0x15, 0x1, 0x11);
+ /* FCH PCIe PortC */
+ PCI_INT(0x0, 0x15, 0x2, 0x12);
+ /* FCH PCIe PortD */
+ PCI_INT(0x0, 0x15, 0x3, 0x13);
+
+ /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0);
+ IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ return mptable_finalize(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr, 0);
+ return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/bap/ode_e21XX/romstage.c b/src/mainboard/bap/ode_e21XX/romstage.c
new file mode 100644
index 0000000..3afbeed
--- /dev/null
+++ b/src/mainboard/bap/ode_e21XX/romstage.c
@@ -0,0 +1,123 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <arch/stages.h>
+#include <device/pnp_def.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <console/console.h>
+#include <commonlib/loglevel.h>
+#include <cpu/amd/car.h>
+#include <northbridge/amd/pi/agesawrapper.h>
+#include <northbridge/amd/pi/agesawrapper_call.h>
+#include <cpu/x86/bist.h>
+#include <cpu/x86/lapic.h>
+#include <southbridge/amd/pi/hudson/hudson.h>
+#include <cpu/amd/pi/s3_resume.h>
+#include <superio/fintek/common/fintek.h>
+#include <superio/fintek/f81866d/f81866d.h>
+
+#define SERIAL_DEV1 PNP_DEV(0x4e, F81866D_SP1)
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ u32 val;
+
+ /*
+ * In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for
+ * LpcClk[1:0]". This following register setting has been
+ * replicated in every reference design since Parmer, so it is
+ * believed to be required even though it is not documented in
+ * the SoC BKDGs. Without this setting, there is no serial
+ * output.
+ */
+ outb(0xD2, 0xcd6);
+ outb(0x00, 0xcd7);
+
+ amd_initmmio();
+
+ hudson_lpc_port80();
+
+ if (!cpu_init_detectedx && boot_cpu()) {
+ post_code(0x30);
+ fintek_enable_serial(SERIAL_DEV1, CONFIG_TTYS0_BASE);
+ post_code(0x31);
+ console_init();
+ }
+
+ /* Halt if there was a built in self test failure */
+ post_code(0x34);
+ report_bist_failure(bist);
+
+ /* Load MPB */
+ val = cpuid_eax(1);
+ printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
+ printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
+
+ /*
+ * This refers to LpcClkDrvSth settling time. Without this setting, processor
+ * initialization is slow or incorrect, so this wait has been replicated from
+ * earlier development boards.
+ */
+ int i;
+ for(i = 0; i < 200000; i++)
+ inb(0xCD6);
+
+ post_code(0x37);
+ AGESAWRAPPER(amdinitreset);
+
+ post_code(0x38);
+ printk(BIOS_DEBUG, "Got past avalon_early_setup\n");
+
+ post_code(0x39);
+ AGESAWRAPPER(amdinitearly);
+ int s3resume = acpi_is_wakeup_s3();
+ if (!s3resume) {
+ post_code(0x40);
+ AGESAWRAPPER(amdinitpost);
+
+ //PspMboxBiosCmdDramInfo();
+ post_code(0x41);
+ AGESAWRAPPER(amdinitenv);
+ /*
+ If code hangs here, please check cahaltasm.S
+ */
+ disable_cache_as_ram();
+ } else { /* S3 detect */
+ printk(BIOS_INFO, "S3 detected\n");
+
+ post_code(0x60);
+ AGESAWRAPPER(amdinitresume);
+
+ AGESAWRAPPER(amds3laterestore);
+
+ post_code(0x61);
+ prepare_for_resume();
+ }
+
+ outb(0xEA, 0xCD6);
+ outb(0x1, 0xcd7);
+
+ post_code(0x50);
+ copy_and_run();
+
+ post_code(0x54); /* Should never see this post code. */
+}
More information about the coreboot-gerrit
mailing list