[coreboot-gerrit] Patch set updated for coreboot: mainboard/cubieboard: use bootblock_mainboard_early_init

[Iru Cai (mytbk920423@gmail.com)]

Iru Cai (mytbk920423 at gmail.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/13448

-gerrit

commit 3c31f192159397c45557553093dd6cae2a26b407
Author: Iru Cai <mytbk920423 at gmail.com>
Date:   Tue Jan 26 10:25:51 2016 +0800

    mainboard/cubieboard: use bootblock_mainboard_early_init
    
    since commit f1e321001d5954096f06f9a43138219a9a46536e, the UART init
    should be in bootblock_mainboard_early_init() which runs before
    console init. (see src/lib/bootblock.c)
    
    Change-Id: Ib00afdd6e81e7689fbd743c8a5f547d424896d71
---
 src/mainboard/cubietech/cubieboard/bootblock.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/src/mainboard/cubietech/cubieboard/bootblock.c b/src/mainboard/cubietech/cubieboard/bootblock.c
index e4a0313..1f6a77f 100644
--- a/src/mainboard/cubietech/cubieboard/bootblock.c
+++ b/src/mainboard/cubietech/cubieboard/bootblock.c
@@ -127,7 +127,7 @@ static void cubieboard_raminit(void)
 	////ram_check((u32)test_base, (u32)test_base + 0x1000);
 }
 
-void bootblock_mainboard_init(void)
+void bootblock_mainboard_early_init(void)
 {
 	/* A10 Timer init uses the 24MHz clock, not PLLs, so we can init it very
 	 * early on to get udelay, which is used almost everywhere else.
@@ -137,6 +137,9 @@ void bootblock_mainboard_init(void)
 	cubieboard_setup_clocks();
 	cubieboard_setup_gpios();
 	cubieboard_enable_uart();
+}
 
+void bootblock_mainboard_init(void)
+{
 	cubieboard_raminit();
 }