[coreboot-gerrit] Patch merged into coreboot/master: google/eve: Configure I2C3 pins as GPIO inputs
gerrit at coreboot.org
gerrit at coreboot.org
Wed Dec 14 01:46:08 CET 2016
the following patch was just integrated into master:
commit 93eb8c48b654ab100491822212238909fa1a2962
Author: Duncan Laurie <dlaurie at chromium.org>
Date: Mon Dec 12 10:43:45 2016 -0800
google/eve: Configure I2C3 pins as GPIO inputs
On this board i2c3 bus is connected to the display TCON, but it is
acting as the master when it has power so it can read from its own
EEPROM on the bus. In order to prevent any possible issues in S0
make these pins input on the SOC.
BUG=chrome-os-partner:58666
TEST=tested on eve board, but this bus was not used before so
there is no visible change in behavior.
Change-Id: Ide32f45ee33ca986fd3249a5161e01edf99d6e22
Signed-off-by: Duncan Laurie <dlaurie at chromium.org>
Reviewed-on: https://review.coreboot.org/17800
Reviewed-by: Aaron Durbin <adurbin at chromium.org>
See https://review.coreboot.org/17800 for details.
-gerrit
More information about the coreboot-gerrit
mailing list