[coreboot-gerrit] New patch to review for coreboot: soc/apollolake: Return correct wake status in _SWS
Shaunak Saha (shaunak.saha@intel.com)
gerrit at coreboot.org
Wed Aug 3 02:43:30 CEST 2016
Shaunak Saha (shaunak.saha at intel.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/16040
-gerrit
commit 486cda44ec869a36c2e17bf58728cc14ebe21243
Author: Shaunak Saha <shaunak.saha at intel.com>
Date: Tue Aug 2 17:25:13 2016 -0700
soc/apollolake: Return correct wake status in _SWS
Wake status is calculated from the four pairs gpe0 in
cbmem CBMEM_ID_POWER_STATE which is filled very early
in romstage and depends on the routing information in
PMC GPE_CFG register. Coreboot sets the proper value
of routing based on devicetree from pmc_init. But when
system goes to S3 on waking up PMC is writing default
values again in GPE_CFG whichjresults in returning
wrong wake status in _SWS. This patch corrects that
behaviour by correcting the gpe0 pairs in cbmem after
PMC sets the routing table in resume path.
BUG=chrome-os-partner:54876
TEST=On resume through powerbtn, lidopen, keyboard press, etc.
we are getting proper wake status.
Change-Id: I5942d5c20d8c6aef73468dc611190bb7c49c7c7a
Signed-off-by: Shaunak Saha <shaunak.saha at intel.com>
---
src/soc/intel/apollolake/Kconfig | 1 +
src/soc/intel/apollolake/acpi.c | 27 +++++++++++++++++++++++++++
src/soc/intel/apollolake/include/soc/pm.h | 3 +++
src/soc/intel/apollolake/pmc.c | 3 +++
src/soc/intel/apollolake/pmutil.c | 24 ++++++++++++++++++++++++
5 files changed, 58 insertions(+)
diff --git a/src/soc/intel/apollolake/Kconfig b/src/soc/intel/apollolake/Kconfig
index 0745679..a85d94a 100644
--- a/src/soc/intel/apollolake/Kconfig
+++ b/src/soc/intel/apollolake/Kconfig
@@ -44,6 +44,7 @@ config CPU_SPECIFIC_OPTIONS
select SMM_TSEG
select SOC_INTEL_COMMON
select SOC_INTEL_COMMON_ACPI
+ select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE
select SOC_INTEL_COMMON_LPSS_I2C
select SOC_INTEL_COMMON_SMI
select SPI_FLASH
diff --git a/src/soc/intel/apollolake/acpi.c b/src/soc/intel/apollolake/acpi.c
index 262e140..6af6d69 100644
--- a/src/soc/intel/apollolake/acpi.c
+++ b/src/soc/intel/apollolake/acpi.c
@@ -168,6 +168,33 @@ static void acpi_create_gnvs(struct global_nvs_t *gnvs)
/* Enable DPTF based on mainboard configuration */
gnvs->dpte = cfg->dptf_enable;
+
+ /* Set unknown wake source */
+ gnvs->pm1i = -1;
+}
+
+/* Save wake source information for calculating ACPI _SWS values */
+int soc_fill_acpi_wake(uint32_t *pm1, uint32_t **gpe0)
+{
+ struct chipset_power_state *ps;
+ static uint32_t gpe0_sts[GPE0_REG_MAX];
+ uint32_t pm1_en;
+ int i;
+
+ ps = cbmem_find(CBMEM_ID_POWER_STATE);
+ if (ps == NULL)
+ return -1;
+
+ /* PM1_EN state is lost in Deep S3 so enable basic wake events */
+ pm1_en = ps->pm1_en | WAK_STS | RTC_STS | PWRBTN_STS ;
+ *pm1 = ps->pm1_sts & pm1_en;
+
+ /* Mask off GPE0 status bits that are not enabled */
+ *gpe0 = &gpe0_sts[0];
+ for (i = 0; i < GPE0_REG_MAX; i++)
+ gpe0_sts[i] = ps->gpe0_sts[i] & ps->gpe0_en[i];
+
+ return GPE0_REG_MAX;
}
void southbridge_inject_dsdt(device_t device)
diff --git a/src/soc/intel/apollolake/include/soc/pm.h b/src/soc/intel/apollolake/include/soc/pm.h
index d8eb50b..e84ecb0 100644
--- a/src/soc/intel/apollolake/include/soc/pm.h
+++ b/src/soc/intel/apollolake/include/soc/pm.h
@@ -25,6 +25,7 @@
#define PM1_STS 0x00
#define WAK_STS (1 << 15)
+#define RTC_STS (1 << 10)
#define PWRBTN_STS (1 << 8)
#define PM1_EN 0x02
@@ -162,6 +163,8 @@ struct chipset_power_state {
int fill_power_state(struct chipset_power_state *ps);
int chipset_prev_sleep_state(struct chipset_power_state *ps);
+/* Rewrite the gpe0 registers in cbmem to proper values as per routing table */
+void reset_power_state(void);
/* Power Management Utility Functions. */
uint32_t clear_smi_status(void);
diff --git a/src/soc/intel/apollolake/pmc.c b/src/soc/intel/apollolake/pmc.c
index 9d1be5c..9997b3f 100644
--- a/src/soc/intel/apollolake/pmc.c
+++ b/src/soc/intel/apollolake/pmc.c
@@ -117,6 +117,9 @@ static void pmc_gpe_init(void)
/* Set the routes in the GPIO communities as well. */
gpio_route_gpe(dw1, dw2, dw3);
+
+ /* Reset the power state in cbmem as routing */
+ reset_power_state();
}
static void pmc_init(struct device *dev)
diff --git a/src/soc/intel/apollolake/pmutil.c b/src/soc/intel/apollolake/pmutil.c
index 61aa637..ad16bbd 100644
--- a/src/soc/intel/apollolake/pmutil.c
+++ b/src/soc/intel/apollolake/pmutil.c
@@ -19,6 +19,7 @@
#include <arch/io.h>
#include <console/console.h>
+#include <cbmem.h>
#include <rules.h>
#include <device/pci_def.h>
#include <halt.h>
@@ -327,6 +328,29 @@ int chipset_prev_sleep_state(struct chipset_power_state *ps)
return prev_sleep_state;
}
+/* This function re-writes the gpe0 register values in power state
+ * cbmem variable. After system wakes from sleep state internal PMC logic
+ * writes default values in GPE_CFG register which gives a wrong offset to
+ * calculate the wake reason. So we need to set it again to the routing
+ * table as per the devicetree.
+ */
+void reset_power_state(void)
+{
+ int i;
+ struct chipset_power_state *ps;
+
+ ps = cbmem_find(CBMEM_ID_POWER_STATE);
+ if (ps == NULL)
+ return;
+
+ for (i=0; i < GPE0_REG_MAX; i++) {
+ ps->gpe0_sts[i] = inl(ACPI_PMIO_BASE + GPE0_STS(i));
+ ps->gpe0_en[i] = inl(ACPI_PMIO_BASE + GPE0_EN(i));
+ printk(BIOS_DEBUG, "gpe0_sts[%d]: %08x gpe0_en[%d]: %08x\n",
+ i, ps->gpe0_sts[i], i, ps->gpe0_en[i]);
+ }
+}
+
/* returns prev_sleep_state */
int fill_power_state(struct chipset_power_state *ps)
{
More information about the coreboot-gerrit
mailing list