[coreboot-gerrit] Patch set updated for coreboot: drivers/i2c/w83795: Add option to use auxiliary SMBUS controller

[Timothy Pearson (tpearson@raptorengineeringinc.com)]

Timothy Pearson (tpearson at raptorengineeringinc.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12080

-gerrit

commit dc9f9aa3999fa876f876b968d8630da08292f7a9
Author: Timothy Pearson <tpearson at raptorengineeringinc.com>
Date:   Sat Oct 17 04:37:10 2015 -0500

    drivers/i2c/w83795: Add option to use auxiliary SMBUS controller
    
    Change-Id: I5a9b5eba992853b84b0cb6c3a1764edf42ac49b2
    Signed-off-by: Timothy Pearson <tpearson at raptorengineeringinc.com>
---
 src/drivers/i2c/w83795/chip.h   |  4 ++++
 src/drivers/i2c/w83795/w83795.c | 14 ++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/src/drivers/i2c/w83795/chip.h b/src/drivers/i2c/w83795/chip.h
index effe119..413ea87 100644
--- a/src/drivers/i2c/w83795/chip.h
+++ b/src/drivers/i2c/w83795/chip.h
@@ -139,4 +139,8 @@ struct drivers_i2c_w83795_config {
 	uint8_t fan6_duty;			/* % of full speed (0-100) */
 	uint8_t fan7_duty;			/* % of full speed (0-100) */
 	uint8_t fan8_duty;			/* % of full speed (0-100) */
+
+	uint8_t smbus_aux;			/* 0 == device located on first SMBUS,
+						 * 1 == device located on auxiliary SMBUS
+						 */
 };
diff --git a/src/drivers/i2c/w83795/w83795.c b/src/drivers/i2c/w83795/w83795.c
index cf0cf2f..453e0af 100644
--- a/src/drivers/i2c/w83795/w83795.c
+++ b/src/drivers/i2c/w83795/w83795.c
@@ -141,7 +141,16 @@ static void w83795_init(struct device *dev, w83795_fan_mode_t mode, u8 dts_src)
 	uint8_t val;
 	uint16_t limit_value;
 
+#if IS_ENABLED(CONFIG_SMBUS_HAS_AUX)
+	uint8_t smbus_aux_prev = smbus_switched_to_aux();
+	smbus_switch_to_aux(config->smbus_aux);
+#endif
+
 	if (smbus_read_byte(dev, 0x00) < 0) {
+#if IS_ENABLED(CONFIG_SMBUS_HAS_AUX)
+		/* Restore SMBUS channel setting */
+		smbus_switch_to_aux(smbus_aux_prev);
+#endif
 		printk(BIOS_ERR, "W83795G/ADG Nuvoton H/W Monitor not found\n");
 		return;
 	}
@@ -325,6 +334,11 @@ static void w83795_init(struct device *dev, w83795_fan_mode_t mode, u8 dts_src)
 	val = w83795_read(dev, W83795_REG_CONFIG);
 	val |= W83795_REG_CONFIG_START;
 	w83795_write(dev, W83795_REG_CONFIG, val);
+
+#if IS_ENABLED(CONFIG_SMBUS_HAS_AUX)
+	/* Restore SMBUS channel setting */
+	smbus_switch_to_aux(smbus_aux_prev);
+#endif
 }
 
 static void w83795_hwm_init(struct device *dev)