[coreboot-gerrit] New patch to review for coreboot: SeaBIOS/Kconfig: Remove SEABIOS_MALLOC_UPPERMEMORY option
Martin Roth (martinroth@google.com)
gerrit at coreboot.org
Sun Nov 29 00:32:42 CET 2015
Martin Roth (martinroth at google.com) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/12570
-gerrit
commit 17a2aa428c4ee415581dff1028c240f43daf0db7
Author: Martin Roth <martinroth at google.com>
Date: Sat Nov 28 16:32:25 2015 -0700
SeaBIOS/Kconfig: Remove SEABIOS_MALLOC_UPPERMEMORY option
This has been replaced by the PAYLOAD_CONFIGFILE option, allowing
any SeaBIOS config option to be set by a platform.
Change-Id: I584c4c481266740840158baba76581d68e69b448
Signed-off-by: Martin Roth <martinroth at google.com>
---
payloads/external/Makefile.inc | 3 +--
payloads/external/SeaBIOS/Kconfig | 12 ------------
payloads/external/SeaBIOS/Makefile.inc | 3 ---
3 files changed, 1 insertion(+), 17 deletions(-)
diff --git a/payloads/external/Makefile.inc b/payloads/external/Makefile.inc
index b044a48..847eef1 100644
--- a/payloads/external/Makefile.inc
+++ b/payloads/external/Makefile.inc
@@ -54,8 +54,7 @@ seabios:
CONFIG_SEABIOS_THREAD_OPTIONROMS=$(CONFIG_SEABIOS_THREAD_OPTIONROMS) \
CONFIG_SEABIOS_VGA_COREBOOT=$(CONFIG_SEABIOS_VGA_COREBOOT) \
CONFIG_CONSOLE_SERIAL=$(CONFIG_CONSOLE_SERIAL) \
- CONFIG_TTYS0_BASE=$(CONFIG_TTYS0_BASE) \
- CONFIG_SEABIOS_MALLOC_UPPERMEMORY=$(CONFIG_SEABIOS_MALLOC_UPPERMEMORY)
+ CONFIG_TTYS0_BASE=$(CONFIG_TTYS0_BASE)
filo:
$(MAKE) -C payloads/external/FILO -f Makefile.inc \
diff --git a/payloads/external/SeaBIOS/Kconfig b/payloads/external/SeaBIOS/Kconfig
index 468c689..4f4fb02 100644
--- a/payloads/external/SeaBIOS/Kconfig
+++ b/payloads/external/SeaBIOS/Kconfig
@@ -35,18 +35,6 @@ config SEABIOS_THREAD_OPTIONROMS
variations during option ROM code execution. It is not
known if all option ROMs will behave properly with this option.
-config SEABIOS_MALLOC_UPPERMEMORY
- bool
- default y
- help
- Use the "Upper Memory Block" area (0xc0000-0xf0000) for internal
- "low memory" allocations. If this is not selected, the memory is
- instead allocated from the "9-segment" (0x90000-0xa0000).
- This is not typically needed, but may be required on some platforms
- to allow USB and SATA buffers to be written correctly by the
- hardware. In general, if this is desired, the option will be
- set to 'N' by the chipset Kconfig.
-
config SEABIOS_VGA_COREBOOT
prompt "Include generated option rom that implements legacy VGA BIOS compatibility"
default n
diff --git a/payloads/external/SeaBIOS/Makefile.inc b/payloads/external/SeaBIOS/Makefile.inc
index 21da35e..7754afb 100644
--- a/payloads/external/SeaBIOS/Makefile.inc
+++ b/payloads/external/SeaBIOS/Makefile.inc
@@ -31,9 +31,6 @@ ifeq ($(CONFIG_CONSOLE_SERIAL),y)
else
echo "# CONFIG_DEBUG_SERIAL is not set" >> seabios/.config
endif
-ifneq ($(CONFIG_SEABIOS_MALLOC_UPPERMEMORY),y)
- echo "# CONFIG_MALLOC_UPPERMEMORY is not set" >> seabios/.config
-endif
ifneq ($(CONFIG_SEABIOS_THREAD_OPTIONROMS),y)
echo "# CONFIG_THREAD_OPTIONROMS is not set" >> seabios/.config
endif
More information about the coreboot-gerrit
mailing list