[coreboot-gerrit] Patch set updated for coreboot: northbridge/amd/amdfam10: Add probe filter support

Timothy Pearson (tpearson@raptorengineeringinc.com) gerrit at coreboot.org
Thu Nov 19 00:34:25 CET 2015


Timothy Pearson (tpearson at raptorengineeringinc.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12021

-gerrit

commit d67755270920f6389d8f0a4eb94b56f959efa1e8
Author: Timothy Pearson <tpearson at raptorengineeringinc.com>
Date:   Sun Aug 2 21:06:39 2015 -0500

    northbridge/amd/amdfam10: Add probe filter support
    
    All modern Opteron processors support the HT probe filter,
    which helps to increase coherent fabric performance by
    reducing the number of HT transactions per cache probe.
    
    AMD recommends that the probe filter be enabled on all
    systems with more than two nodes, and it does not hurt
    to enable it on systems with 2 nodes.
    
    Change-Id: I00a27a828260be8685ae622cfa5a4995add95a8e
    Signed-off-by: Timothy Pearson <tpearson at raptorengineeringinc.com>
---
 src/cpu/amd/family_10h-family_15h/init_cpus.c      |  13 ++
 .../amd/family_10h-family_15h/model_10xxx_init.c   |  22 ++++
 src/northbridge/amd/amdfam10/northbridge.c         | 144 ++++++++++++++++++++-
 src/northbridge/amd/amdht/h3ncmn.c                 |  22 ++++
 4 files changed, 200 insertions(+), 1 deletion(-)

diff --git a/src/cpu/amd/family_10h-family_15h/init_cpus.c b/src/cpu/amd/family_10h-family_15h/init_cpus.c
index a421bfcc..a6d8dc4 100644
--- a/src/cpu/amd/family_10h-family_15h/init_cpus.c
+++ b/src/cpu/amd/family_10h-family_15h/init_cpus.c
@@ -441,6 +441,19 @@ static u32 init_cpus(u32 cpu_init_detectedx, struct sys_info *sysinfo)
 
 		cpuSetAMDMSR(id.nodeid);
 
+		/* Set up probe filter support */
+		if (is_gt_rev_d()) {
+			uint8_t node_count;
+			node_count = (pci_read_config32(NODE_PCI(id.nodeid, 0), 0x60) >> 4) & 0x7;
+			node_count++;
+
+			if (node_count > 1) {
+				msr_t msr = rdmsr(BU_CFG2_MSR);
+				msr.hi |= 1 << (42 - 32);
+				wrmsr(BU_CFG2_MSR, msr);
+			}
+		}
+
 #if CONFIG_SET_FIDVID
 #if CONFIG_LOGICAL_CPUS && CONFIG_SET_FIDVID_CORE0_ONLY
 		// Run on all AP for proper FID/VID setup.
diff --git a/src/cpu/amd/family_10h-family_15h/model_10xxx_init.c b/src/cpu/amd/family_10h-family_15h/model_10xxx_init.c
index 0a86966..4ccf79d 100644
--- a/src/cpu/amd/family_10h-family_15h/model_10xxx_init.c
+++ b/src/cpu/amd/family_10h-family_15h/model_10xxx_init.c
@@ -50,6 +50,28 @@ static inline uint8_t is_fam15h(void)
 	return fam15h;
 }
 
+static inline uint8_t is_gt_rev_d(void)
+{
+	uint8_t fam15h = 0;
+	uint8_t rev_gte_d = 0;
+	uint32_t family;
+	uint32_t model;
+
+	family = model = cpuid_eax(0x80000001);
+	model = ((model & 0xf0000) >> 12) | ((model & 0xf0) >> 4);
+	family = ((family & 0xf00000) >> 16) | ((family & 0xf00) >> 8);
+
+	if (family >= 0x6f)
+		/* Family 15h or later */
+		fam15h = 1;
+
+	if ((model >= 0x8) || fam15h)
+		/* Revision D or later */
+		rev_gte_d = 1;
+
+	return rev_gte_d;
+}
+
 static volatile uint8_t fam15h_startup_flags[MAX_NODES_SUPPORTED][MAX_CORES_SUPPORTED] = {{ 0 }};
 
 static void model_10xxx_init(device_t dev)
diff --git a/src/northbridge/amd/amdfam10/northbridge.c b/src/northbridge/amd/amdfam10/northbridge.c
index a922496..8651ad0 100644
--- a/src/northbridge/amd/amdfam10/northbridge.c
+++ b/src/northbridge/amd/amdfam10/northbridge.c
@@ -26,10 +26,13 @@
 #include <lib.h>
 #include <smbios.h>
 #include <cpu/cpu.h>
+#include <delay.h>
 
 #include <cpu/x86/lapic.h>
+#include <cpu/x86/cache.h>
 #include <cpu/amd/mtrr.h>
 #include <cpu/amd/amdfam10_sysconf.h>
+#include <cpu/amd/model_10xxx_msr.h>
 #include <cpu/amd/family_10h-family_15h/ram_calc.h>
 
 #if CONFIG_LOGICAL_CPUS
@@ -1523,7 +1526,7 @@ static void cpu_bus_scan(device_t dev)
 		if(i>=32) {
 			busn--;
 			devn-=32;
-			pbus = pci_domain->link_list->next);
+			pbus = pci_domain->link_list->next;
 		}
 #endif
 
@@ -1643,8 +1646,147 @@ static void cpu_bus_scan(device_t dev)
 	}
 }
 
+static void detect_and_enable_probe_filter(device_t dev)
+{
+	uint32_t dword;
+
+	uint8_t fam15h = 0;
+	uint8_t rev_gte_d = 0;
+	uint8_t dual_node = 0;
+	unsigned nb_cfg_54;
+	uint32_t f3xe8;
+	uint32_t family;
+	uint32_t model;
+
+	family = model = cpuid_eax(0x80000001);
+	model = ((model & 0xf0000) >> 12) | ((model & 0xf0) >> 4);
+
+	if (is_fam15h()) {
+		/* Family 15h or later */
+		fam15h = 1;
+		nb_cfg_54 = 1;
+	}
+
+	if ((model >= 0x8) || fam15h)
+		/* Revision D or later */
+		rev_gte_d = 1;
+
+	if (rev_gte_d)
+		/* Check for dual node capability */
+		if (f3xe8 & 0x20000000)
+			dual_node = 1;
+
+	if (rev_gte_d && (sysconf.nodes > 1)) {
+		/* Enable the probe filter */
+		uint8_t i;
+		uint8_t pfmode = 0x0;
+
+		uint32_t f3x58[MAX_NODES_SUPPORTED];
+		uint32_t f3x5c[MAX_NODES_SUPPORTED];
+
+		printk(BIOS_DEBUG, "Enabling probe filter\n");
+
+		/* Disable L3 and DRAM scrubbers and configure system for probe filter support */
+		for (i = 0; i < sysconf.nodes; i++) {
+			device_t f2x_dev = dev_find_slot(0, PCI_DEVFN(0x18 + i, 2));
+			device_t f3x_dev = dev_find_slot(0, PCI_DEVFN(0x18 + i, 3));
+
+			f3x58[i] = pci_read_config32(f3x_dev, 0x58);
+			f3x5c[i] = pci_read_config32(f3x_dev, 0x5c);
+			pci_write_config32(f3x_dev, 0x58, f3x58[i] & ~((0x1f << 24) | 0x1f));
+			pci_write_config32(f3x_dev, 0x5c, f3x5c[i] & ~0x1);
+
+			dword = pci_read_config32(f2x_dev, 0x1b0);
+			dword &= ~(0x7 << 8);	/* CohPrefPrbLmt = 0x0 */
+			pci_write_config32(f2x_dev, 0x1b0, dword);
+
+			msr_t msr = rdmsr_amd(BU_CFG2_MSR);
+			msr.hi |= 1 << (42 - 32);
+			wrmsr_amd(BU_CFG2_MSR, msr);
+
+			if (is_fam15h()) {
+				uint8_t subcache_size = 0x0;
+				uint8_t pref_so_repl = 0x0;
+				uint32_t f3x1c4 = pci_read_config32(f3x_dev, 0x1c4);
+				if ((f3x1c4 & 0xffff) == 0xcccc) {
+					subcache_size = 0x1;
+					pref_so_repl = 0x2;
+					pfmode = 0x3;
+				} else {
+					pfmode = 0x2;
+				}
+
+				dword = pci_read_config32(f3x_dev, 0x1d4);
+				dword |= 0x1 << 29;	/* PFLoIndexHashEn = 0x1 */
+				dword &= ~(0x3 << 20);	/* PFPreferredSORepl = pref_so_repl */
+				dword |= (pref_so_repl & 0x3) << 20;
+				dword |= 0x1 << 17;	/* PFWayHashEn = 0x1 */
+				dword |= 0xf << 12;	/* PFSubCacheEn = 0xf */
+				dword &= ~(0x3 << 10);	/* PFSubCacheSize3 = subcache_size */
+				dword |= (subcache_size & 0x3) << 10;
+				dword &= ~(0x3 << 8);	/* PFSubCacheSize2 = subcache_size */
+				dword |= (subcache_size & 0x3) << 8;
+				dword &= ~(0x3 << 6);	/* PFSubCacheSize1 = subcache_size */
+				dword |= (subcache_size & 0x3) << 6;
+				dword &= ~(0x3 << 4);	/* PFSubCacheSize0 = subcache_size */
+				dword |= (subcache_size & 0x3) << 4;
+				dword &= ~(0x3 << 2);	/* PFWayNum = 0x2 */
+				dword |= 0x2 << 2;
+				pci_write_config32(f3x_dev, 0x1d4, dword);
+			} else {
+				pfmode = 0x2;
+
+				dword = pci_read_config32(f3x_dev, 0x1d4);
+				dword |= 0x1 << 29;	/* PFLoIndexHashEn = 0x1 */
+				dword &= ~(0x3 << 20);	/* PFPreferredSORepl = 0x2 */
+				dword |= 0x2 << 20;
+				dword |= 0xf << 12;	/* PFSubCacheEn = 0xf */
+				dword &= ~(0x3 << 10);	/* PFSubCacheSize3 = 0x0 */
+				dword &= ~(0x3 << 8);	/* PFSubCacheSize2 = 0x0 */
+				dword &= ~(0x3 << 6);	/* PFSubCacheSize1 = 0x0 */
+				dword &= ~(0x3 << 4);	/* PFSubCacheSize0 = 0x0 */
+				dword &= ~(0x3 << 2);	/* PFWayNum = 0x2 */
+				dword |= 0x2 << 2;
+				pci_write_config32(f3x_dev, 0x1d4, dword);
+			}
+		}
+
+		udelay(40);
+
+		disable_cache();
+		asm("wbinvd");
+		for (i = 0; i < sysconf.nodes; i++) {
+			device_t f3x_dev = dev_find_slot(0, PCI_DEVFN(0x18 + i, 3));
+
+			dword = pci_read_config32(f3x_dev, 0x1c4);
+			dword |= (0x1 << 31);	/* L3TagInit = 1 */
+			pci_write_config32(f3x_dev, 0x1c4, dword);
+			do {
+			} while (pci_read_config32(f3x_dev, 0x1c4) & (0x1 << 31));
+
+			dword = pci_read_config32(f3x_dev, 0x1d4);
+			dword &= ~0x3;		/* PFMode = pfmode */
+			dword |= pfmode & 0x3;
+			pci_write_config32(f3x_dev, 0x1d4, dword);
+			do {
+			} while (!(pci_read_config32(f3x_dev, 0x1d4) & (0x1 << 19)));
+		}
+		enable_cache();
+
+		/* Reenable L3 and DRAM scrubbers */
+		for (i = 0; i < sysconf.nodes; i++) {
+			device_t f3x_dev = dev_find_slot(0, PCI_DEVFN(0x18 + i, 3));
+
+			pci_write_config32(f3x_dev, 0x58, f3x58[i]);
+			pci_write_config32(f3x_dev, 0x5c, f3x5c[i]);
+		}
+
+	}
+}
+
 static void cpu_bus_init(device_t dev)
 {
+	detect_and_enable_probe_filter(dev);
 	initialize_cpus(dev->link_list);
 #if CONFIG_AMD_SB_CIMX
 	sb_After_Pci_Init();
diff --git a/src/northbridge/amd/amdht/h3ncmn.c b/src/northbridge/amd/amdht/h3ncmn.c
index 01c0e48..8ee929d 100644
--- a/src/northbridge/amd/amdht/h3ncmn.c
+++ b/src/northbridge/amd/amdht/h3ncmn.c
@@ -103,6 +103,28 @@ static inline uint8_t is_fam15h(void)
 	return fam15h;
 }
 
+static inline uint8_t is_gt_rev_d(void)
+{
+	uint8_t fam15h = 0;
+	uint8_t rev_gte_d = 0;
+	uint32_t family;
+	uint32_t model;
+
+	family = model = cpuid_eax(0x80000001);
+	model = ((model & 0xf0000) >> 12) | ((model & 0xf0) >> 4);
+	family = ((family & 0xf00000) >> 16) | ((family & 0xf00) >> 8);
+
+	if (family >= 0x6f)
+		/* Family 15h or later */
+		fam15h = 1;
+
+	if ((model >= 0x8) || fam15h)
+		/* Revision D or later */
+		rev_gte_d = 1;
+
+	return rev_gte_d;
+}
+
 /***************************************************************************//**
  *
  * SBDFO



More information about the coreboot-gerrit mailing list