[coreboot-gerrit] New patch to review for coreboot: [REMOVAL] tyan/s2885
Stefan Reinauer (stefan.reinauer@coreboot.org)
gerrit at coreboot.org
Mon Nov 9 22:46:01 CET 2015
Stefan Reinauer (stefan.reinauer at coreboot.org) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/12380
-gerrit
commit ce751e2354781ce6e893209fba1ae41633dcb559
Author: Stefan Reinauer <stefan.reinauer at coreboot.org>
Date: Mon Nov 9 13:35:49 2015 -0800
[REMOVAL] tyan/s2885
As announced in http://permalink.gmane.org/gmane.linux.bios/81918
I am removing all boards older than 10 years from the tree.
Change-Id: Icfdcc5d6043987e22ef9b4db84847d62c91bd305
Signed-off-by: Stefan Reinauer <stefan.reinauer at coreboot.org>
---
src/mainboard/tyan/s2885/Kconfig | 51 ------
src/mainboard/tyan/s2885/Kconfig.name | 2 -
src/mainboard/tyan/s2885/board_info.txt | 4 -
src/mainboard/tyan/s2885/cmos.layout | 60 --------
src/mainboard/tyan/s2885/devicetree.cb | 122 ---------------
src/mainboard/tyan/s2885/get_bus_conf.c | 129 ----------------
src/mainboard/tyan/s2885/irq_tables.c | 112 --------------
src/mainboard/tyan/s2885/mptable.c | 123 ---------------
src/mainboard/tyan/s2885/resourcemap.c | 264 --------------------------------
src/mainboard/tyan/s2885/romstage.c | 121 ---------------
10 files changed, 988 deletions(-)
diff --git a/src/mainboard/tyan/s2885/Kconfig b/src/mainboard/tyan/s2885/Kconfig
deleted file mode 100644
index b218ab7..0000000
--- a/src/mainboard/tyan/s2885/Kconfig
+++ /dev/null
@@ -1,51 +0,0 @@
-if BOARD_TYAN_S2885
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select CPU_AMD_SOCKET_940
- select NORTHBRIDGE_AMD_AMDK8
- select SOUTHBRIDGE_AMD_AMD8111
- select SOUTHBRIDGE_AMD_AMD8131
- select SOUTHBRIDGE_AMD_AMD8151
- select HT_CHAIN_DISTRIBUTE
- select SUPERIO_WINBOND_W83627HF
- select HAVE_OPTION_TABLE
- select HAVE_PIRQ_TABLE
- select HAVE_MP_TABLE
- select BOARD_ROMSIZE_KB_512
- select SB_HT_CHAIN_UNITID_OFFSET_ONLY
- select QRANK_DIMM_SUPPORT
-
-config MAINBOARD_DIR
- string
- default tyan/s2885
-
-config APIC_ID_OFFSET
- hex
- default 0x10
-
-config MAINBOARD_PART_NUMBER
- string
- default "S2885"
-
-config MAX_CPUS
- int
- default 4
-
-config MAX_PHYSICAL_CPUS
- int
- default 2
-
-config HT_CHAIN_UNITID_BASE
- hex
- default 0xa
-
-config HT_CHAIN_END_UNITID_BASE
- hex
- default 0x6
-
-config IRQ_SLOT_COUNT
- int
- default 11
-
-endif # BOARD_TYAN_S2885
diff --git a/src/mainboard/tyan/s2885/Kconfig.name b/src/mainboard/tyan/s2885/Kconfig.name
deleted file mode 100644
index 15d2333..0000000
--- a/src/mainboard/tyan/s2885/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_TYAN_S2885
- bool "S2885 (Thunder K8W)"
diff --git a/src/mainboard/tyan/s2885/board_info.txt b/src/mainboard/tyan/s2885/board_info.txt
deleted file mode 100644
index 9a10c88..0000000
--- a/src/mainboard/tyan/s2885/board_info.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-Board name: Thunder K8W (S2885)
-Category: desktop
-Board URL: http://www.tyan.com/archive/products/html/thunderk8w.html
-Release year: 2003
diff --git a/src/mainboard/tyan/s2885/cmos.layout b/src/mainboard/tyan/s2885/cmos.layout
deleted file mode 100644
index 4e081ea..0000000
--- a/src/mainboard/tyan/s2885/cmos.layout
+++ /dev/null
@@ -1,60 +0,0 @@
-entries
-
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-388 4 r 0 reboot_bits
-392 3 e 5 baud_rate
-395 1 e 1 hw_scrubber
-396 1 e 1 interleave_chip_selects
-397 2 e 8 max_mem_clock
-399 1 e 2 multi_core
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-440 4 e 9 slow_cpu
-444 1 e 1 nmi
-445 1 e 1 iommu
-456 1 e 1 ECC_memory
-728 256 h 0 user_data
-984 16 h 0 check_sum
-# Reserve the extended AMD configuration registers
-1000 24 r 0 amd_reserved
-
-
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-5 0 115200
-5 1 57600
-5 2 38400
-5 3 19200
-5 4 9600
-5 5 4800
-5 6 2400
-5 7 1200
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-8 0 DDR400
-8 1 DDR333
-8 2 DDR266
-8 3 DDR200
-9 0 off
-9 1 87.5%
-9 2 75.0%
-9 3 62.5%
-9 4 50.0%
-9 5 37.5%
-9 6 25.0%
-9 7 12.5%
-
-checksums
-
-checksum 392 983 984
diff --git a/src/mainboard/tyan/s2885/devicetree.cb b/src/mainboard/tyan/s2885/devicetree.cb
deleted file mode 100644
index 97a18e5..0000000
--- a/src/mainboard/tyan/s2885/devicetree.cb
+++ /dev/null
@@ -1,122 +0,0 @@
-chip northbridge/amd/amdk8/root_complex
- device cpu_cluster 0 on
- chip cpu/amd/socket_940
- device lapic 0 on end
- end
- end
- device domain 0 on
- subsystemid 0x10f1 0x2885 inherit
- chip northbridge/amd/amdk8
- device pci 18.0 on # LDT0
- chip southbridge/amd/amd8151
- # the on/off keyword is mandatory
- device pci 0.0 on end
- device pci 1.0 on end
- end
- end
- device pci 18.0 on end # LDT1
- device pci 18.0 on # northbridge
- # devices on link 2, link 2 == LDT 2
- chip southbridge/amd/amd8131
- # the on/off keyword is mandatory
- device pci 0.0 on
- device pci 9.0 on end # broadcom 5703
- end
- device pci 0.1 on end
- device pci 1.0 on end
- device pci 1.1 on end
- end
- chip southbridge/amd/amd8111
- # this "device pci 0.0" is the parent the next one
- # PCI bridge
- device pci 0.0 on
- device pci 0.0 on end
- device pci 0.1 on end
- device pci 0.2 off end
- device pci 1.0 off end
- device pci b.0 on end # SiI 3114
- end
- device pci 1.0 on
- chip superio/winbond/w83627hf
- device pnp 2e.0 on # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci 1.1 on end
- device pci 1.2 on end
- device pci 1.3 on
- chip drivers/generic/generic #dimm 0-0-0
- device i2c 50 on end
- end
- chip drivers/generic/generic #dimm 0-0-1
- device i2c 51 on end
- end
- chip drivers/generic/generic #dimm 0-1-0
- device i2c 52 on end
- end
- chip drivers/generic/generic #dimm 0-1-1
- device i2c 53 on end
- end
- chip drivers/generic/generic #dimm 1-0-0
- device i2c 54 on end
- end
- chip drivers/generic/generic #dimm 1-0-1
- device i2c 55 on end
- end
- chip drivers/generic/generic #dimm 1-1-0
- device i2c 56 on end
- end
- chip drivers/generic/generic #dimm 1-1-1
- device i2c 57 on end
- end
- end # acpi
- device pci 1.5 on end
- device pci 1.6 off end
- register "ide0_enable" = "1"
- register "ide1_enable" = "1"
- end
- end # device pci 18.0
-
- device pci 18.1 on end
- device pci 18.2 on end
- device pci 18.3 on end
- end
-
- end #domain
-end
diff --git a/src/mainboard/tyan/s2885/get_bus_conf.c b/src/mainboard/tyan/s2885/get_bus_conf.c
deleted file mode 100644
index 2df51a0..0000000
--- a/src/mainboard/tyan/s2885/get_bus_conf.c
+++ /dev/null
@@ -1,129 +0,0 @@
-#include <console/console.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <string.h>
-#include <stdint.h>
-#include <cpu/amd/multicore.h>
-
-#include <cpu/amd/amdk8_sysconf.h>
-#include <stdlib.h>
-
-// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
-//busnum is default
-unsigned char bus_8131_0 = 1;
-unsigned char bus_8131_1 = 2;
-unsigned char bus_8131_2 = 3;
-unsigned char bus_8111_0 = 1;
-unsigned char bus_8111_1 = 4;
-unsigned char bus_8151_0 = 5;
-unsigned char bus_8151_1 = 6;
-unsigned apicid_8111;
-unsigned apicid_8131_1;
-unsigned apicid_8131_2;
-
-unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not
- //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
- 0x0000ff0,
- 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0,
-// 0x0000ff0
-};
-
-unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
- 0x20202020,
- 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-// 0x20202020,
-};
-
-unsigned sbdn3;
-unsigned sbdn5;
-
-static unsigned get_bus_conf_done = 0;
-
-void get_bus_conf(void)
-{
-
- unsigned apicid_base;
-
- device_t dev;
- int i;
-
- if (get_bus_conf_done == 1)
- return; //do it only once
-
- get_bus_conf_done = 1;
-
- sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
- for (i = 0; i < sysconf.hc_possible_num; i++) {
- sysconf.pci1234[i] = pci1234x[i];
- sysconf.hcdn[i] = hcdnx[i];
- }
-
- get_sblk_pci1234();
-
- sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff;
- sbdn3 = sysconf.hcdn[0] & 0xff;
- sbdn5 = sysconf.hcdn[1] & 0xff;
-
- bus_8131_0 = (sysconf.pci1234[0] >> 16) & 0xff;
- bus_8111_0 = bus_8131_0;
-
- /* 8111 */
- dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn, 0));
- if (dev) {
- bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- } else {
- printk(BIOS_DEBUG,
- "ERROR - could not find PCI %02x:03.0, using defaults\n",
- bus_8111_0);
- }
-
- /* 8131-1 */
- dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0));
- if (dev) {
- bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- } else {
- printk(BIOS_DEBUG,
- "ERROR - could not find PCI %02x:01.0, using defaults\n",
- bus_8131_0);
- }
-
- /* 8132-2 */
- dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3 + 1, 0));
- if (dev) {
- bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- } else {
- printk(BIOS_DEBUG,
- "ERROR - could not find PCI %02x:02.0, using defaults\n",
- bus_8131_0);
- }
-
- /* HT chain 1 */
- // it is on node0, so it must be there
- bus_8151_0 = (sysconf.pci1234[1] >> 16) & 0xff;
- /* 8151 */
- dev = dev_find_slot(bus_8151_0, PCI_DEVFN(sbdn5 + 1, 0));
-
- if (dev) {
- bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-// printk(BIOS_DEBUG, "bus_8151_1=%d\n",bus_8151_1);
- }
-
-/*I/O APICs: APIC ID Version State Address*/
- if (IS_ENABLED(CONFIG_LOGICAL_CPUS))
- apicid_base = get_apicid_base(3);
- else
- apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
- apicid_8111 = apicid_base + 0;
- apicid_8131_1 = apicid_base + 1;
- apicid_8131_2 = apicid_base + 2;
-}
diff --git a/src/mainboard/tyan/s2885/irq_tables.c b/src/mainboard/tyan/s2885/irq_tables.c
deleted file mode 100644
index f217365..0000000
--- a/src/mainboard/tyan/s2885/irq_tables.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/* This file was generated by getpir.c, do not modify!
- (but if you do, please run checkpir on it to verify)
- Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
-
- Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
-*/
-#include <console/console.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <arch/pirq_routing.h>
-
-#include <cpu/amd/amdk8_sysconf.h>
-
-static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
- uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
- uint8_t slot, uint8_t rfu)
-{
- pirq_info->bus = bus;
- pirq_info->devfn = devfn;
- pirq_info->irq[0].link = link0;
- pirq_info->irq[0].bitmap = bitmap0;
- pirq_info->irq[1].link = link1;
- pirq_info->irq[1].bitmap = bitmap1;
- pirq_info->irq[2].link = link2;
- pirq_info->irq[2].bitmap = bitmap2;
- pirq_info->irq[3].link = link3;
- pirq_info->irq[3].bitmap = bitmap3;
- pirq_info->slot = slot;
- pirq_info->rfu = rfu;
-}
-
-extern unsigned char bus_8131_0;
-extern unsigned char bus_8131_1;
-extern unsigned char bus_8131_2;
-extern unsigned char bus_8111_0;
-extern unsigned char bus_8111_1;
-extern unsigned char bus_8151_0;
-extern unsigned char bus_8151_1;
-
-extern unsigned sbdn3;
-extern unsigned sbdn5;
-
-
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
-
- struct irq_routing_table *pirq;
- struct irq_info *pirq_info;
- unsigned slot_num;
- uint8_t *v;
-
- uint8_t sum=0;
- int i;
-
- get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
-
- /* Align the table to be 16 byte aligned. */
- addr += 15;
- addr &= ~15;
-
- /* This table must be between 0xf0000 & 0x100000 */
- printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
-
- pirq = (void *)(addr);
- v = (uint8_t *)(addr);
-
- pirq->signature = PIRQ_SIGNATURE;
- pirq->version = PIRQ_VERSION;
-
- pirq->rtr_bus = bus_8111_0;
- pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0;
-
- pirq->exclusive_irqs = 0;
-
- pirq->rtr_vendor = 0x1022;
- pirq->rtr_device = 0x746b;
-
- pirq->miniport_data = 0;
-
- memset(pirq->rfu, 0, sizeof(pirq->rfu));
-
- pirq_info = (void *) ( &pirq->checksum + 1);
- slot_num = 0;
-//pci bridge
- write_pirq_info(pirq_info, bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
- pirq_info++; slot_num++;
-//pcix bridge
-// write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
-// pirq_info++; slot_num++;
-//agp bridge
- write_pirq_info(pirq_info, bus_8151_0, (sbdn5<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
-
- pirq_info++; slot_num++;
-
- pirq->size = 32 + 16 * slot_num;
-
- for (i = 0; i < pirq->size; i++)
- sum += v[i];
-
- sum = pirq->checksum - sum;
-
- if (sum != pirq->checksum) {
- pirq->checksum = sum;
- }
-
- printk(BIOS_INFO, "done.\n");
-
- return (unsigned long) pirq_info;
-
-}
diff --git a/src/mainboard/tyan/s2885/mptable.c b/src/mainboard/tyan/s2885/mptable.c
deleted file mode 100644
index fe0f8d8..0000000
--- a/src/mainboard/tyan/s2885/mptable.c
+++ /dev/null
@@ -1,123 +0,0 @@
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <arch/ioapic.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <cpu/amd/amdk8_sysconf.h>
-
-extern unsigned char bus_8131_0;
-extern unsigned char bus_8131_1;
-extern unsigned char bus_8131_2;
-extern unsigned char bus_8111_0;
-extern unsigned char bus_8111_1;
-extern unsigned char bus_8151_0;
-extern unsigned char bus_8151_1;
-extern unsigned apicid_8111;
-extern unsigned apicid_8131_1;
-extern unsigned apicid_8131_2;
-
-extern unsigned sbdn3;
-extern unsigned sbdn5;
-
-static void *smp_write_config_table(void *v)
-{
- struct mp_config_table *mc;
- int i, bus_isa;
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
- mptable_init(mc, LOCAL_APIC_ADDR);
-
- smp_write_processors(mc);
-
- get_bus_conf();
-
- mptable_write_buses(mc, NULL, &bus_isa);
-
-/*I/O APICs: APIC ID Version State Address*/
- smp_write_ioapic(mc, apicid_8111, 0x11, VIO_APIC_VADDR); //8111
- {
- device_t dev;
- struct resource *res;
- dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,1));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, apicid_8131_1, 0x11,
- res2mmio(res, 0, 0));
- }
- }
- dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,1));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, apicid_8131_2, 0x11,
- res2mmio(res, 0, 0));
- }
- }
- }
-
- mptable_add_isa_interrupts(mc, bus_isa, apicid_8111, 0);
-
-/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
-//??? What
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|3, apicid_8111, 0x13);
-//Onboard AMD AC97 Audio
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|1, apicid_8111, 0x11);
-// Onboard AMD USB
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13);
-
-// AGP Display Adapter
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8151_1, 0x0, apicid_8111, 0x10);
-
-//Onboard Serial ATA
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|0, apicid_8111, 0x11);
-//Onboard Firewire
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0c<<2)|0, apicid_8111, 0x13);
-//Onboard Broadcom NIC
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, apicid_8131_1, 0x0);
-
-//Slot 5 PCI 32
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|i, apicid_8111, 0x10 + (0+i)%4); //16
- }
-
-
-//Slot 3 PCIX 100/66
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (8<<2)|i, apicid_8131_1, (3+i)%4); //27
- }
-
-
-//Slot 4 PCIX 100/66
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (7<<2)|i, apicid_8131_1, (2+i)%4); //26
- }
-
-
-//Slot 1 PCI-X 133/100/66
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|i, apicid_8131_2, (0+i)%4); //28
- }
-
-
-//Slot 2 PCI-X 133/100/66
- for(i=0;i<4;i++) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (6<<2)|i, apicid_8131_2, (1+i)%4); //29
- }
-
-/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
- mptable_lintsrc(mc, bus_isa);
- /* There is no extension information... */
-
- /* Compute the checksums */
- return mptable_finalize(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr, 0);
- return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/tyan/s2885/resourcemap.c b/src/mainboard/tyan/s2885/resourcemap.c
deleted file mode 100644
index cac1b22..0000000
--- a/src/mainboard/tyan/s2885/resourcemap.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * Tyan S2885 needs a different resource map
- *
- */
-
-static void setup_s2885_resource_map(void)
-{
- static const unsigned int register_values[] = {
- /* Careful set limit registers before base registers which contain the enables */
- /* DRAM Limit i Registers
- * F1:0x44 i = 0
- * F1:0x4C i = 1
- * F1:0x54 i = 2
- * F1:0x5C i = 3
- * F1:0x64 i = 4
- * F1:0x6C i = 5
- * F1:0x74 i = 6
- * F1:0x7C i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 3] Reserved
- * [10: 8] Interleave select
- * specifies the values of A[14:12] to use with interleave enable.
- * [15:11] Reserved
- * [31:16] DRAM Limit Address i Bits 39-24
- * This field defines the upper address bits of a 40 bit address
- * that define the end of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
- PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
- PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
- PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
- PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
- PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
- /* DRAM Base i Registers
- * F1:0x40 i = 0
- * F1:0x48 i = 1
- * F1:0x50 i = 2
- * F1:0x58 i = 3
- * F1:0x60 i = 4
- * F1:0x68 i = 5
- * F1:0x70 i = 6
- * F1:0x78 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 7: 2] Reserved
- * [10: 8] Interleave Enable
- * 000 = No interleave
- * 001 = Interleave on A[12] (2 nodes)
- * 010 = reserved
- * 011 = Interleave on A[12] and A[14] (4 nodes)
- * 100 = reserved
- * 101 = reserved
- * 110 = reserved
- * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
- * [15:11] Reserved
- * [13:16] DRAM Base Address i Bits 39-24
- * This field defines the upper address bits of a 40-bit address
- * that define the start of the DRAM region.
- */
- PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
-
- /* Memory-Mapped I/O Limit i Registers
- * F1:0x84 i = 0
- * F1:0x8C i = 1
- * F1:0x94 i = 2
- * F1:0x9C i = 3
- * F1:0xA4 i = 4
- * F1:0xAC i = 5
- * F1:0xB4 i = 6
- * F1:0xBC i = 7
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = Reserved
- * [ 6: 6] Reserved
- * [ 7: 7] Non-Posted
- * 0 = CPU writes may be posted
- * 1 = CPU writes must be non-posted
- * [31: 8] Memory-Mapped I/O Limit Address i (39-16)
- * This field defines the upp adddress bits of a 40-bit address that
- * defines the end of a memory-mapped I/O region n
- */
- PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
-// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20,
-
- /* Memory-Mapped I/O Base i Registers
- * F1:0x80 i = 0
- * F1:0x88 i = 1
- * F1:0x90 i = 2
- * F1:0x98 i = 3
- * F1:0xA0 i = 4
- * F1:0xA8 i = 5
- * F1:0xB0 i = 6
- * F1:0xB8 i = 7
- * [ 0: 0] Read Enable
- * 0 = Reads disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes disabled
- * 1 = Writes Enabled
- * [ 2: 2] Cpu Disable
- * 0 = Cpu can use this I/O range
- * 1 = Cpu requests do not use this I/O range
- * [ 3: 3] Lock
- * 0 = base/limit registers i are read/write
- * 1 = base/limit registers i are read-only
- * [ 7: 4] Reserved
- * [31: 8] Memory-Mapped I/O Base Address i (39-16)
- * This field defines the upper address bits of a 40bit address
- * that defines the start of memory-mapped I/O region i
- */
- PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
-// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
-
- /* PCI I/O Limit i Registers
- * F1:0xC4 i = 0
- * F1:0xCC i = 1
- * F1:0xD4 i = 2
- * F1:0xDC i = 3
- * [ 2: 0] Destination Node ID
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 3: 3] Reserved
- * [ 5: 4] Destination Link ID
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 = reserved
- * [11: 6] Reserved
- * [24:12] PCI I/O Limit Address i
- * This field defines the end of PCI I/O region n
- * [31:25] Reserved
- */
-// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020,
- PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
-
- /* PCI I/O Base i Registers
- * F1:0xC0 i = 0
- * F1:0xC8 i = 1
- * F1:0xD0 i = 2
- * F1:0xD8 i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 3: 2] Reserved
- * [ 4: 4] VGA Enable
- * 0 = VGA matches Disabled
- * 1 = matches all address < 64K and where A[9:0] is in the
- * range 3B0-3BB or 3C0-3DF independen of the base & limit registers
- * [ 5: 5] ISA Enable
- * 0 = ISA matches Disabled
- * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
- * from matching agains this base/limit pair
- * [11: 6] Reserved
- * [24:12] PCI I/O Base i
- * This field defines the start of PCI I/O region n
- * [31:25] Reserved
- */
-// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
- PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
-
- /* Config Base and Limit i Registers
- * F1:0xE0 i = 0
- * F1:0xE4 i = 1
- * F1:0xE8 i = 2
- * F1:0xEC i = 3
- * [ 0: 0] Read Enable
- * 0 = Reads Disabled
- * 1 = Reads Enabled
- * [ 1: 1] Write Enable
- * 0 = Writes Disabled
- * 1 = Writes Enabled
- * [ 2: 2] Device Number Compare Enable
- * 0 = The ranges are based on bus number
- * 1 = The ranges are ranges of devices on bus 0
- * [ 3: 3] Reserved
- * [ 6: 4] Destination Node
- * 000 = Node 0
- * 001 = Node 1
- * 010 = Node 2
- * 011 = Node 3
- * 100 = Node 4
- * 101 = Node 5
- * 110 = Node 6
- * 111 = Node 7
- * [ 7: 7] Reserved
- * [ 9: 8] Destination Link
- * 00 = Link 0
- * 01 = Link 1
- * 10 = Link 2
- * 11 - Reserved
- * [15:10] Reserved
- * [23:16] Bus Number Base i
- * This field defines the lowest bus number in configuration region i
- * [31:24] Bus Number Limit i
- * This field defines the highest bus number in configuration regin i
- */
-// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x06000203, // AMD 8111 on link2 of CPU 0
-// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x08070003, // AMD 8151 on link0 of CPU 0
- PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
- PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
- };
-
- int max;
- max = ARRAY_SIZE(register_values);
- setup_resource_map(register_values, max);
-}
diff --git a/src/mainboard/tyan/s2885/romstage.c b/src/mainboard/tyan/s2885/romstage.c
deleted file mode 100644
index fdf9606..0000000
--- a/src/mainboard/tyan/s2885/romstage.c
+++ /dev/null
@@ -1,121 +0,0 @@
-#include <stdint.h>
-#include <string.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <pc80/mc146818rtc.h>
-#include <console/console.h>
-#include <lib.h>
-#include <spd.h>
-#include <cpu/amd/model_fxx_rev.h>
-#include "northbridge/amd/amdk8/incoherent_ht.c"
-#include "southbridge/amd/amd8111/early_smbus.c"
-#include <northbridge/amd/amdk8/raminit.h>
-#include <delay.h>
-#include "northbridge/amd/amdk8/reset_test.c"
-#include "northbridge/amd/amdk8/debug.c"
-#include <superio/winbond/common/winbond.h>
-#include <superio/winbond/w83627hf/w83627hf.h>
-#include <cpu/x86/bist.h>
-#include "northbridge/amd/amdk8/setup_resource_map.c"
-#include "southbridge/amd/amd8111/early_ctrl.c"
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-
-static void memreset_setup(void)
-{
- if (is_cpu_pre_c0())
- outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
- else
- outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
- outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
-}
-
-static void memreset(int controllers, const struct mem_controller *ctrl)
-{
- if (is_cpu_pre_c0()) {
- udelay(800);
- outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
- udelay(90);
- }
-}
-
-static void activate_spd_rom(const struct mem_controller *ctrl) { }
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/amd/amdk8/raminit.c"
-#include "northbridge/amd/amdk8/coherent_ht.c"
-#include "lib/generic_sdram.c"
-#include "resourcemap.c"
-#include "cpu/amd/dualcore/dualcore.c"
-#include "cpu/amd/model_fxx/init_cpus.c"
-
-void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
-{
- static const uint16_t spd_addr [] = {
- DIMM0, DIMM2, 0, 0,
- DIMM1, DIMM3, 0, 0,
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
- DIMM4, DIMM6, 0, 0,
- DIMM5, DIMM7, 0, 0,
-#endif
- };
-
- int needs_reset;
- unsigned bsp_apicid = 0, nodes;
- struct mem_controller ctrl[8];
-
- if (bist == 0)
- bsp_apicid = init_cpus(cpu_init_detectedx);
-
- winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- console_init();
-
-// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x200, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE);
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- setup_s2885_resource_map();
-#if 0
- dump_pci_device(PCI_DEV(0, 0x18, 0));
- dump_pci_device(PCI_DEV(0, 0x19, 0));
-#endif
-
- needs_reset = setup_coherent_ht_domain();
-
- wait_all_core0_started();
-#if CONFIG_LOGICAL_CPUS
- // It is said that we should start core1 after all core0 launched
- start_other_cores();
- wait_all_other_cores_started(bsp_apicid);
-#endif
-
- needs_reset |= ht_setup_chains_x();
-
- if (needs_reset) {
- printk(BIOS_INFO, "ht reset -\n");
- soft_reset();
- }
-
- allow_all_aps_stop(bsp_apicid);
-
- nodes = get_nodes();
- //It's the time to set ctrl now;
- fill_mem_ctrl(nodes, ctrl, spd_addr);
-
- enable_smbus();
-
- memreset_setup();
- sdram_initialize(nodes, ctrl);
-
-#if 0
- dump_pci_devices();
-#endif
-
- post_cache_as_ram();
-}
More information about the coreboot-gerrit
mailing list