[coreboot-gerrit] Patch set updated for coreboot: 7b546e0 mainboard/bap: Add support for BAP ODE E20XX
Fabian Kunkel (fabi@adv.bruhnspace.com)
gerrit at coreboot.org
Wed May 27 11:22:18 CEST 2015
Fabian Kunkel (fabi at adv.bruhnspace.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10288
-gerrit
commit 7b546e0ee17e971edac6b3b3f213bb44b5f7e7a4
Author: Fabian Kunkel <fabi at adv.bruhnspace.com>
Date: Mon May 25 17:08:17 2015 +0200
mainboard/bap: Add support for BAP ODE E20XX
Adding new board based on AMD Kabini.
Most of the code is copied from gizmosphere/gizmo2
Board is developed by BAP - Bruhnspace Advanced Projects:
http://www.unibap.com/ (Site is under construction)
Special on this board is:
-Soldered down memory
-SuperIO Fintek F81866D
Known bugs:
-S3 doesnt work
-Serial ports only works for the first boot. Needs power cut.
Tested with:
-SeaBios as Payload
-Linux OS - Lubuntu 14.10 32/64Bit, Kernel 3.19 - 4.1
-Windows 8 64Bit
Change-Id: I7e2b306620dd152a9f01ab6ccf2a0a880a068adb
Signed-off-by: Fabian Kunkel <fabi at adv.bruhnspace.com>
---
src/mainboard/bap/Kconfig | 36 ++
src/mainboard/bap/Kconfig.name | 2 +
src/mainboard/bap/ode_e20XX/BAP_Q7.spd.hex | 283 +++++++++++++++
src/mainboard/bap/ode_e20XX/BiosCallOuts.c | 221 ++++++++++++
src/mainboard/bap/ode_e20XX/Kconfig | 70 ++++
src/mainboard/bap/ode_e20XX/Kconfig.name | 2 +
src/mainboard/bap/ode_e20XX/Makefile.inc | 47 +++
src/mainboard/bap/ode_e20XX/OptionsIds.h | 63 ++++
src/mainboard/bap/ode_e20XX/PlatformGnbPcie.c | 161 +++++++++
src/mainboard/bap/ode_e20XX/acpi/AmdImc.asl | 114 ++++++
src/mainboard/bap/ode_e20XX/acpi/gpe.asl | 78 +++++
src/mainboard/bap/ode_e20XX/acpi/ide.asl | 250 +++++++++++++
src/mainboard/bap/ode_e20XX/acpi/mainboard.asl | 41 +++
src/mainboard/bap/ode_e20XX/acpi/routing.asl | 197 +++++++++++
src/mainboard/bap/ode_e20XX/acpi/sata.asl | 150 ++++++++
src/mainboard/bap/ode_e20XX/acpi/si.asl | 27 ++
src/mainboard/bap/ode_e20XX/acpi/sleep.asl | 97 +++++
src/mainboard/bap/ode_e20XX/acpi/superio.asl | 52 +++
src/mainboard/bap/ode_e20XX/acpi/thermal.asl | 20 ++
src/mainboard/bap/ode_e20XX/acpi/usb_oc.asl | 132 +++++++
src/mainboard/bap/ode_e20XX/acpi_tables.c | 60 ++++
src/mainboard/bap/ode_e20XX/board_info.txt | 1 +
src/mainboard/bap/ode_e20XX/buildOpts.c | 466 +++++++++++++++++++++++++
src/mainboard/bap/ode_e20XX/cmos.layout | 79 +++++
src/mainboard/bap/ode_e20XX/devicetree.cb | 117 +++++++
src/mainboard/bap/ode_e20XX/dsdt.asl | 91 +++++
src/mainboard/bap/ode_e20XX/irq_tables.c | 107 ++++++
src/mainboard/bap/ode_e20XX/mainboard.c | 137 ++++++++
src/mainboard/bap/ode_e20XX/mptable.c | 169 +++++++++
src/mainboard/bap/ode_e20XX/romstage.c | 120 +++++++
30 files changed, 3390 insertions(+)
diff --git a/src/mainboard/bap/Kconfig b/src/mainboard/bap/Kconfig
new file mode 100644
index 0000000..d72f131
--- /dev/null
+++ b/src/mainboard/bap/Kconfig
@@ -0,0 +1,36 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2015 BAP - Bruhnspace Advanced Projects
+## (Written by Fabian Kunkel <fabi at adv.bruhnspace.com> for BAP)
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc.
+##
+if VENDOR_BAP
+
+choice
+ prompt "Mainboard model"
+
+config BOARD_ODE_E20XX
+ bool "ODE_E20XX"
+
+endchoice
+
+source "src/mainboard/bap/ode_e20XX/Kconfig"
+
+config MAINBOARD_VENDOR
+ string
+ default "BAP"
+
+endif # VENDOR_BAP
diff --git a/src/mainboard/bap/Kconfig.name b/src/mainboard/bap/Kconfig.name
new file mode 100644
index 0000000..d923316
--- /dev/null
+++ b/src/mainboard/bap/Kconfig.name
@@ -0,0 +1,2 @@
+config VENDOR_BAP
+ bool "BAP"
diff --git a/src/mainboard/bap/ode_e20XX/BAP_Q7.spd.hex b/src/mainboard/bap/ode_e20XX/BAP_Q7.spd.hex
new file mode 100644
index 0000000..df1f1f0
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/BAP_Q7.spd.hex
@@ -0,0 +1,283 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2015 BAP - Bruhnspace Advanced Projects
+## (Written by Fabian Kunkel <fabi at adv.bruhnspace.com> for BAP)
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc.
+##
+
+# BAP ODE E20XX has 2GB ram soldered down on the Q7
+
+# 0 Number of SPD Bytes used / Total SPD Size / CRC Coverage
+# bits[3:0]: 1 = 128 SPD Bytes Used
+# bits[6:4]: 1 = 256 SPD Bytes Total
+# bit7 : 0 = CRC covers bytes 0 ~ 125
+92
+
+# 1 SPD Revision -
+# 0x10 = Revision 1.0
+12
+
+# 2 Key Byte / DRAM Device Type
+# bits[7:0]: 0x0b = DDR3 SDRAM
+0B
+
+# 3 Key Byte / Module Type
+# bits[3:0]: 3 = SO-DIMM
+# bits[7:4]: reserved
+03
+
+# 4 SDRAM CHIP Density and Banks
+# bits[3:0]: 3 = 2 Gigabits Total SDRAM capacity per chip
+# bits[6:4]: 0 = 3 (8 banks)
+# bit7 : reserved
+04
+
+# 5 SDRAM Addressing
+# bits[2:0]: 1 = 10 Column Address Bits
+# bits[5:3]: 2 = 14 Row Address Bits
+# bits[7:6]: reserved
+19
+
+# 6 Module Nominal Voltage, VDD
+# bit0 : 0 = 1.5 V operable
+# bit1 : 0 = NOT 1.35 V operable
+# bit2 : 0 = NOT 1.25 V operable
+# bits[7:3]: reserved
+00
+
+# 7 Module Organization
+# bits[2:0]: 2 = 16 bits
+# bits[5:3]: 0 = 1 Rank
+# bits[7:6]: reserved
+02
+
+# 8 Module Memory Bus Width
+# bits[2:0]: 3 = Primary bus width is 64 bits
+# bits[4:3]: 0 = 0 bits (no bus width extension)
+# bits[7:5]: reserved
+08
+
+# 9 Fine Timebase (FTB) Dividend / Divisor
+# bits[3:0]: 0x02 divisor
+# bits[7:4]: 0x05 dividend
+# 5/2 = 2.5ps
+52
+
+# 10 Medium Timebase (MTB) Dividend
+# 11 Medium Timebase (MTB) Divisor
+# 1 / 8 = .125 ns - used for clock freq of 400 through 1066 MHz
+01 08
+
+# 12 SDRAM Minimum Cycle Time (tCKmin)
+# 0x0a = tCKmin of 1.25 ns = DDR3-1600 (800 MHz clock)
+0C
+
+# 13 Reserved
+00
+
+# 14 CAS Latencies Supported, Least Significant Byte
+# 15 CAS Latencies Supported, Most Significant Byte
+# Cas Latencies of 11 - 5 are supported
+7E 00
+
+# 16 Minimum CAS Latency Time (tAAmin)
+# 0x6E = 13.75ns - DDR3-1600K
+69
+
+# 17 Minimum Write Recovery Time (tWRmin)
+# 0x78 = tWR of 15ns - All DDR3 speed grades
+78
+
+# 18 Minimum RAS# to CAS# Delay Time (tRCDmin)
+# 0x6E = 13.75ns - DDR3-1600K
+69
+
+# 19 Minimum Row Active to Row Active Delay Time (tRRDmin)
+# 0x3C = 7.5ns
+3C
+
+# 20 Minimum Row Precharge Delay Time (tRPmin)
+# 0x6E = 13.75ns - DDR3-1600K
+69
+
+# 21 Upper Nibbles for tRAS and tRC
+# bits[3:0]: tRAS most significant nibble = 1 (see byte 22)
+# bits[7:4]: tRC most significant nibble = 1 (see byte 23)
+11
+
+# 22 Minimum Active to Precharge Delay Time (tRASmin), LSB
+# 0x118 = 35ns - DDR3-1600 (see byte 21)
+20
+
+# 23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB
+# 0x186 = 48.75ns - DDR3-1600K
+89
+
+# 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB
+# 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB
+# 0x500 = 160ns - for 2 Gigabit chips
+20 08
+
+# 26 Minimum Internal Write to Read Command Delay Time (tWTRmin)
+# 0x3c = 7.5 ns - All DDR3 SDRAM speed bins
+3C
+
+# 27 Minimum Internal Read to Precharge Command Delay Time (tRTPmin)
+# 0x3c = 7.5ns - All DDR3 SDRAM speed bins
+3C
+
+# 28 Upper Nibble for tFAWmin
+# 29 Minimum Four Activate Window Delay Time (tFAWmin)
+# 0x0140 = 40ns - DDR3-1600, 2 KB page size
+01 68
+
+# 30 SDRAM Optional Feature
+# bit0 : 1= RZQ/6 supported
+# bit1 : 1 = RZQ/7 supported
+# bits[6:2]: reserved
+# bit7 : 1 = DLL Off mode supported
+83
+
+# 31 SDRAM Thermal and Refresh Options
+# bit0 : 1 = Temp up to 95c supported
+# bit1 : 0 = 85-95c uses 2x refresh rate
+# bit2 : 1 = Auto Self Refresh supported
+# bit3 : 0 = no on die thermal sensor
+# bits[6:4]: reserved
+# bit7 : 0 = partial self refresh supported
+01
+
+# 32 Module Thermal Sensor
+# 0 = Thermal sensor not incorporated onto this assembly
+00
+
+# 33 SDRAM Device Type
+# bits[1:0]: 0 = Signal Loading not specified
+# bits[3:2]: reserved
+# bits[6:4]: 0 = Die count not specified
+# bit7 : 0 = Standard Monolithic DRAM Device
+00
+
+# 34 Fine Offset for SDRAM Minimum Cycle Time (tCKmin)
+# 35 Fine Offset for Minimum CAS Latency Time (tAAmin)
+# 36 Fine Offset for Minimum RAS# to CAS# Delay Time (tRCDmin)
+# 37 Fine Offset for Minimum Row Precharge Delay Time (tRPmin)
+# 38 Fine Offset for Minimum Active to Active/Refresh Delay (tRCmin)
+00 00 00 00 00
+
+# 39 - 59 (reserved)
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00
+
+# 60 Raw Card Extension, Module Nominal Height
+# bits[4:0]: 0 = <= 15mm tall
+# bits[7:5]: 0 = raw card revision 0-3
+0f
+
+# 61 Module Maximum Thickness
+# bits[3:0]: 0 = thickness front <= 1mm
+# bits[7:4]: 0 = thinkness back <= 1mm
+11
+
+# 62 Reference Raw Card Used
+# bits[4:0]: 0 = Reference Raw card A used
+# bits[6:5]: 0 = revision 0
+# bit7 : 0 = Reference raw cards A through AL
+22
+
+# 63 Address Mapping from Edge Connector to DRAM
+# bit0 : 0 = standard mapping (not mirrored)
+# bits[7:1]: reserved
+00
+
+# 64 - 116 (reserved)
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00
+00 00 00 00 00
+
+# 117 - 118 Module ID: Module Manufacturers JEDEC ID Code
+# 0x0001 = AMD
+80 AD
+
+# 119 Module ID: Module Manufacturing Location - oem specified
+# 120 Module ID: Module Manufacture Year in BCD
+# 0x13 = 2013
+01 00
+
+# 121 Module ID: Module Manufacture week
+# 0x12 = 12th week
+00
+
+# 122 - 125: Module Serial Number
+00 00 00 00
+
+# 126 - 127: Cyclical Redundancy Code
+D4 51
+
+# Coreboot is only interested in the first 128 values
+#128 - 135
+48 4d 54 34 32 35 53 36
+
+#136 - 143
+4d 46 52 36 43 2d 48 39
+
+#144 - 151
+20 20 4e 30 80 ad 00 00
+
+#152 - 159
+00 00 00 00 00 00 00 00
+
+#160 - 167
+00 00 00 00 00 00 00 00
+
+#168 - 175
+00 00 00 00 00 00 00 00
+
+#176 - 183
+00 00 00 00 00 00 00 00
+
+#184 - 191
+00 00 00 00 00 00 00 00
+
+#192 - 199
+00 00 00 00 00 00 00 00
+
+#200 - 207
+00 00 00 00 00 00 00 00
+
+#208 - 215
+00 00 00 00 00 00 00 00
+
+#216 - 223
+00 00 00 00 00 00 00 00
+
+#224 - 231
+00 00 00 00 00 00 00 00
+
+#232 - 239
+00 00 00 00 00 00 00 00
+
+#240 - 247
+00 00 00 00 00 00 00 00
+
+#248 - 255
+00 00 00 00 00 00 00 00
\ No newline at end of file
diff --git a/src/mainboard/bap/ode_e20XX/BiosCallOuts.c b/src/mainboard/bap/ode_e20XX/BiosCallOuts.c
new file mode 100644
index 0000000..2faf6cd
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/BiosCallOuts.c
@@ -0,0 +1,221 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include <northbridge/amd/agesa/BiosCallOuts.h>
+#include "Ids.h"
+#include "OptionsIds.h"
+#include "heapManager.h"
+#include "FchPlatform.h"
+#include "cbfs.h"
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+#include "imc.h"
+#endif
+#include <stdlib.h>
+
+static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr);
+
+const BIOS_CALLOUT_STRUCT BiosCallouts[] =
+{
+ {AGESA_DO_RESET, agesa_Reset },
+ {AGESA_READ_SPD, agesa_ReadSpd_from_cbfs },
+ {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
+ {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
+ {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData },
+ {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
+ {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
+ {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config },
+ {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage }
+};
+const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
+
+/**
+ * ALC272 Verb Table
+ */
+const CODEC_ENTRY Alc272_VerbTbl[] = {
+ {0x11, 0x411111F0}, // - SPDIF_OUT2
+ {0x12, 0x411111F0}, // - DMIC_1/2
+ {0x13, 0x411111F0}, // - DMIC_3/4
+ {0x14, 0x411111F0}, // Port D - LOUT1
+ {0x15, 0x01011050}, // Port A - LOUT2 Explorer 2x DAC
+ {0x16, 0x411111F0}, //
+ {0x17, 0x411111F0}, // Port H - MONO
+ {0x18, 0x01a11840}, // Port B - MIC1
+ {0x19, 0x411111F0}, // Port F - MIC2
+ {0x1a, 0x01811030}, // Port C - LINE1
+ {0x1b, 0x01811020}, // Port E - LINE2 Explorer 2x ADC
+ {0x1d, 0x40130605}, // - PCBEEP
+ {0x1e, 0x411111F0}, // - SPDIF_OUT1
+ {0x21, 0x01211010}, // Port I - HPOUT
+ {0xff, 0xffffffff}
+};
+
+static const CODEC_TBL_LIST CodecTableList[] =
+{
+ {0x10ec0272, (CODEC_ENTRY*)&Alc272_VerbTbl[0]},
+ {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
+};
+
+#define FAN_INPUT_INTERNAL_DIODE 0
+#define FAN_INPUT_TEMP0 1
+#define FAN_INPUT_TEMP1 2
+#define FAN_INPUT_TEMP2 3
+#define FAN_INPUT_TEMP3 4
+#define FAN_INPUT_TEMP0_FILTER 5
+#define FAN_INPUT_ZERO 6
+#define FAN_INPUT_DISABLED 7
+
+#define FAN_AUTOMODE (1 << 0)
+#define FAN_LINEARMODE (1 << 1)
+#define FAN_STEPMODE ~(1 << 1)
+#define FAN_POLARITY_HIGH (1 << 2)
+#define FAN_POLARITY_LOW ~(1 << 2)
+
+/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
+#define FREQ_28KHZ 0x0
+#define FREQ_25KHZ 0x1
+#define FREQ_23KHZ 0x2
+#define FREQ_21KHZ 0x3
+#define FREQ_29KHZ 0x4
+#define FREQ_18KHZ 0x5
+#define FREQ_100HZ 0xF7
+#define FREQ_87HZ 0xF8
+#define FREQ_58HZ 0xF9
+#define FREQ_44HZ 0xFA
+#define FREQ_35HZ 0xFB
+#define FREQ_29HZ 0xFC
+#define FREQ_22HZ 0xFD
+#define FREQ_14HZ 0xFE
+#define FREQ_11HZ 0xFF
+
+/* Hardware Monitor Fan Control
+ * Hardware limitation:
+ * HWM failed to read the input temperture vi I2C,
+ * if other software switch the I2C switch by mistake or intention.
+ * We recommend to using IMC to control Fans, instead of HWM.
+ */
+static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
+{
+ /* Enable IMC fan control. the recommand way */
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+
+ imc_reg_init();
+
+ /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
+
+ FchParams->Imc.ImcEnable = TRUE;
+ FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
+ FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
+
+ LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+
+ /* Thermal Zone Parameter */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e;//6 | BIT3;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
+
+ /* IMC Fan Policy temperature thresholds */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 50; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 45; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 40; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
+
+ /* IMC Fan Policy PWM Settings */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 100; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 99; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 98; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
+
+ FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
+
+ /* NOTE:
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
+ * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
+ * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ */
+
+#else /* HWM fan control, the way not recommand */
+ FchParams->Imc.ImcEnable = FALSE;
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
+
+#endif /* CONFIG_HUDSON_IMC_FWM */
+}
+
+/**
+ * Fch Oem setting callback
+ *
+ * Configure platform specific Hudson device,
+ * such Azalia, SATA, IMC etc.
+ */
+static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
+{
+ AMD_CONFIG_PARAMS *StdHeader = ConfigPtr;
+
+ if (StdHeader->Func == AMD_INIT_RESET) {
+ FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *)FchData;
+ printk(BIOS_DEBUG, "Fch OEM config in INIT RESET ");
+ //FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */
+ FchParams_reset->FchReset.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
+ FchParams_reset->FchReset.Xhci1Enable = FALSE;
+ } else if (StdHeader->Func == AMD_INIT_ENV) {
+ FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData;
+ printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
+
+ /* Azalia Controller OEM Codec Table Pointer */
+ FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]);
+ /* Azalia Controller Front Panel OEM Table Pointer */
+
+ /* Fan Control */
+ oem_fan_control(FchParams_env);
+
+ /* XHCI configuration */
+ FchParams_env->Usb.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
+ FchParams_env->Usb.Xhci1Enable = FALSE;
+
+ /* sata configuration */
+ }
+ printk(BIOS_DEBUG, "Done\n");
+
+ return AGESA_SUCCESS;
+}
diff --git a/src/mainboard/bap/ode_e20XX/Kconfig b/src/mainboard/bap/ode_e20XX/Kconfig
new file mode 100644
index 0000000..177238c
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/Kconfig
@@ -0,0 +1,70 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+# Copyright (C) 2013-2014 Sage Electronic Engineering
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+if BOARD_ODE_E20XX
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select CPU_AMD_AGESA_FAMILY16_KB
+ select NORTHBRIDGE_AMD_AGESA_FAMILY16_KB
+ select SOUTHBRIDGE_AMD_AGESA_YANGTZE
+ select HAVE_OPTION_TABLE
+ select HAVE_PIRQ_TABLE
+ select HAVE_MP_TABLE
+ select HAVE_ACPI_RESUME
+ select HAVE_ACPI_TABLES
+ select BOARD_ROMSIZE_KB_4096
+ select GFXUMA
+ select SUPERIO_FINTEK_F81866D
+ select SPD_CACHE
+
+config MAINBOARD_DIR
+ string
+ default bap/ode_e20XX
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "ODE_E20XX"
+
+config HW_MEM_HOLE_SIZEK
+ hex
+ default 0x200000
+
+config MAX_CPUS
+ int
+ default 4
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+ bool
+ default n
+
+config IRQ_SLOT_COUNT
+ int
+ default 11
+
+config ONBOARD_VGA_IS_PRIMARY
+ bool
+ default y
+
+config HUDSON_LEGACY_FREE
+ bool
+ default y
+
+endif # BOARD_ODE_E20XX
diff --git a/src/mainboard/bap/ode_e20XX/Kconfig.name b/src/mainboard/bap/ode_e20XX/Kconfig.name
new file mode 100644
index 0000000..8ff2d9b
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/Kconfig.name
@@ -0,0 +1,2 @@
+config BOARD_ODE_E20XX
+ bool "ODE_e20xx"
\ No newline at end of file
diff --git a/src/mainboard/bap/ode_e20XX/Makefile.inc b/src/mainboard/bap/ode_e20XX/Makefile.inc
new file mode 100644
index 0000000..f89e13a
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/Makefile.inc
@@ -0,0 +1,47 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+# Copyright (C) 2014 Sage Electronic Engineering, LLC
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+romstage-y += buildOpts.c
+romstage-y += BiosCallOuts.c
+romstage-y += PlatformGnbPcie.c
+
+ramstage-y += buildOpts.c
+ramstage-y += BiosCallOuts.c
+ramstage-y += PlatformGnbPcie.c
+
+## DIMM SPD for on-board memory
+SPD_BIN = $(obj)/spd.bin
+
+# Order of names in SPD_SOURCES is important!
+SPD_SOURCES = BAP_Q7
+
+SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/$(f).spd.hex)
+
+# Include spd rom data
+$(SPD_BIN): $(SPD_DEPS)
+ for f in $+; \
+ do for c in $$(cat $$f | grep -v ^#); \
+ do printf $$(printf '\%o' 0x$$c); \
+ done; \
+ done > $@
+
+cbfs-files-y += spd.bin
+spd.bin-file := $(SPD_BIN)
+spd.bin-type := spd
diff --git a/src/mainboard/bap/ode_e20XX/OptionsIds.h b/src/mainboard/bap/ode_e20XX/OptionsIds.h
new file mode 100644
index 0000000..bbdcd5f
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/OptionsIds.h
@@ -0,0 +1,63 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+/**
+ * @file
+ *
+ * IDS Option File
+ *
+ * This file is used to switch on/off IDS features.
+ *
+ */
+#ifndef _OPTION_IDS_H_
+#define _OPTION_IDS_H_
+
+/**
+ *
+ * This file generates the defaults tables for the Integrated Debug Support
+ * Module. The documented build options are imported from a user controlled
+ * file for processing. The build options for the Integrated Debug Support
+ * Module are listed below:
+ *
+ * IDSOPT_IDS_ENABLED
+ * IDSOPT_ERROR_TRAP_ENABLED
+ * IDSOPT_CONTROL_ENABLED
+ * IDSOPT_TRACING_ENABLED
+ * IDSOPT_PERF_ANALYSIS
+ * IDSOPT_ASSERT_ENABLED
+ * IDS_DEBUG_PORT
+ * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+ *
+ **/
+
+#define IDSOPT_IDS_ENABLED TRUE
+//#define IDSOPT_CONTROL_ENABLED TRUE
+//#define IDSOPT_TRACING_ENABLED TRUE
+#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE
+//#define IDSOPT_PERF_ANALYSIS TRUE
+#define IDSOPT_ASSERT_ENABLED TRUE
+//#undef IDSOPT_DEBUG_ENABLED
+//#define IDSOPT_DEBUG_ENABLED FALSE
+//#undef IDSOPT_HOST_SIMNOW
+//#define IDSOPT_HOST_SIMNOW FALSE
+//#undef IDSOPT_HOST_HDT
+//#define IDSOPT_HOST_HDT FALSE
+//#define IDS_DEBUG_PORT 0x80
+
+#endif
diff --git a/src/mainboard/bap/ode_e20XX/PlatformGnbPcie.c b/src/mainboard/bap/ode_e20XX/PlatformGnbPcie.c
new file mode 100644
index 0000000..fc0ec89
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/PlatformGnbPcie.c
@@ -0,0 +1,161 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "Filecode.h"
+
+#include <northbridge/amd/agesa/agesawrapper.h>
+
+#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE
+
+static const PCIe_PORT_DESCRIPTOR PortList [] = {
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 3, 3),
+ PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 5,
+ HotplugBasic,
+ PcieGenMaxSupported,
+ PcieGenMaxSupported,
+ AspmL0sL1, 0x01, 0)
+ },
+ /* Initialize Port descriptor (PCIe port, Lanes 1, PCI Device Number 2, ...) */
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 2, 2),
+ PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 4,
+ HotplugBasic,
+ PcieGenMaxSupported,
+ PcieGenMaxSupported,
+ AspmL0sL1, 0x02, 0)
+ },
+ /* Initialize Port descriptor (PCIe port, Lanes 2, PCI Device Number 2, ...) */
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 1, 1),
+ PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 3,
+ HotplugDisabled,
+ PcieGenMaxSupported,
+ PcieGenMaxSupported,
+ AspmL0sL1, 0x03, 0)
+ },
+ /* Initialize Port descriptor (PCIe port, Lanes 3, PCI Device Number 2, ...) */
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 0),
+ PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 2,
+ HotplugDisabled,
+ PcieGenMaxSupported,
+ PcieGenMaxSupported,
+ AspmL0sL1, 0x04, 0)
+ },
+ /* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device Number 4, ...) */
+ {
+ DESCRIPTOR_TERMINATE_LIST, //Descriptor flags !!!IMPORTANT!!! Terminate last element of array
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 7),
+ PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 1,
+ HotplugBasic,
+ PcieGenMaxSupported,
+ PcieGenMaxSupported,
+ AspmL0sL1, 0x05, 0)
+ }
+};
+
+static const PCIe_DDI_DESCRIPTOR DdiList [] = {
+ /* DP0 to HDMI0/DP */
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1)
+ },
+ /* DP1 to high-speed edge connector */
+ {
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2)
+ },
+ /* DP2 to HDMI1/DP */
+ {
+ DESCRIPTOR_TERMINATE_LIST,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 16, 19),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeCrt, Aux3, Hdp3)
+ },
+};
+
+static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = {
+ .Flags = DESCRIPTOR_TERMINATE_LIST,
+ .SocketId = 0,
+ .PciePortList = PortList,
+ .DdiLinkList = DdiList
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * OemCustomizeInitEarly
+ *
+ * Description:
+ * This is the stub function will call the host environment through the binary block
+ * interface (call-out port) to provide a user hook opportunity
+ *
+ * Parameters:
+ * @param[in] *InitEarly
+ *
+ * @retval VOID
+ *
+ **/
+/*---------------------------------------------------------------------------------------*/
+
+static AGESA_STATUS OemInitEarly(AMD_EARLY_PARAMS * InitEarly)
+{
+ AGESA_STATUS Status;
+ PCIe_COMPLEX_DESCRIPTOR *PcieComplexListPtr;
+
+ ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+ /* GNB PCIe topology Porting */
+
+ /* */
+ /* Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR */
+ /* */
+ AllocHeapParams.RequestedBufferSize = sizeof(PcieComplex);
+
+ AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START;
+ AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+ Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader);
+ ASSERT(Status == AGESA_SUCCESS);
+
+ PcieComplexListPtr = (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr;
+ LibAmdMemCopy (PcieComplexListPtr, &PcieComplex, sizeof(PcieComplex), &InitEarly->StdHeader);
+ InitEarly->GnbConfig.PcieComplexList = PcieComplexListPtr;
+ return AGESA_SUCCESS;
+}
+
+static AGESA_STATUS OemInitMid(AMD_MID_PARAMS * InitMid)
+{
+ /* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */
+ InitMid->GnbMidConfiguration.iGpuVgaMode = 0;
+ return AGESA_SUCCESS;
+}
+
+const struct OEM_HOOK OemCustomize = {
+ .InitEarly = OemInitEarly,
+ .InitMid = OemInitMid,
+};
diff --git a/src/mainboard/bap/ode_e20XX/acpi/AmdImc.asl b/src/mainboard/bap/ode_e20XX/acpi/AmdImc.asl
new file mode 100644
index 0000000..88d3381
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/acpi/AmdImc.asl
@@ -0,0 +1,114 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+//BTDC Due to IMC Fan, ACPI control codes
+OperationRegion(IMIO, SystemIO, 0x3E, 0x02)
+Field(IMIO , ByteAcc, NoLock, Preserve) {
+ IMCX,8,
+ IMCA,8
+}
+
+IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) {
+ Offset(0x80),
+ MSTI, 8,
+ MITS, 8,
+ MRG0, 8,
+ MRG1, 8,
+ MRG2, 8,
+ MRG3, 8,
+}
+
+Method(WACK, 0)
+{
+ Store(0, Local0)
+ While (LNotEqual(Local0, 0xFA)) {
+ Store(MRG0, Local0)
+ Sleep(10)
+ }
+}
+
+//Init
+Method (ITZE, 0)
+{
+ Store(0, MRG0)
+ Store(0xB5, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(0, MRG2)
+ Store(0x80, MSTI)
+ WACK()
+
+ Or(MRG2, 0x01, Local0)
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(Local0, MRG2)
+ Store(0x81, MSTI)
+ WACK()
+}
+
+//Sleep
+Method (IMSP, 0)
+{
+ Store(0, MRG0)
+ Store(0xB5, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(1, MRG1)
+ Store(0, MRG2)
+ Store(0x98, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(0xB4, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+}
+
+//Wake
+Method (IMWK, 0)
+{
+ Store(0, MRG0)
+ Store(0xB5, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(0, MRG2)
+ Store(0x80, MSTI)
+ WACK()
+
+ Or(MRG2, 0x01, Local0)
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(Local0, MRG2)
+ Store(0x81, MSTI)
+ WACK()
+}
diff --git a/src/mainboard/bap/ode_e20XX/acpi/gpe.asl b/src/mainboard/bap/ode_e20XX/acpi/gpe.asl
new file mode 100644
index 0000000..33aab24
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/acpi/gpe.asl
@@ -0,0 +1,78 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+Scope(\_GPE) { /* Start Scope GPE */
+
+ /* General event 3 */
+ Method(_L03) {
+ /* DBGO("\\_GPE\\_L00\n") */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* Legacy PM event */
+ Method(_L08) {
+ /* DBGO("\\_GPE\\_L08\n") */
+ }
+
+ /* Temp warning (TWarn) event */
+ Method(_L09) {
+ /* DBGO("\\_GPE\\_L09\n") */
+ /* Notify (\_TZ.TZ00, 0x80) */
+ }
+
+ /* USB controller PME# */
+ Method(_L0B) {
+ /* DBGO("\\_GPE\\_L0B\n") */
+ Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.XHC0, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* ExtEvent0 SCI event */
+ Method(_L10) {
+ /* DBGO("\\_GPE\\_L10\n") */
+ }
+
+ /* ExtEvent1 SCI event */
+ Method(_L11) {
+ /* DBGO("\\_GPE\\_L11\n") */
+ }
+
+ /* GPIO0 or GEvent8 event */
+ Method(_L18) {
+ /* DBGO("\\_GPE\\_L18\n") */
+ Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* Azalia SCI event */
+ Method(_L1B) {
+ /* DBGO("\\_GPE\\_L1B\n") */
+ Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+} /* End Scope GPE */
diff --git a/src/mainboard/bap/ode_e20XX/acpi/ide.asl b/src/mainboard/bap/ode_e20XX/acpi/ide.asl
new file mode 100644
index 0000000..dfb4158
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/acpi/ide.asl
@@ -0,0 +1,250 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012-2013 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+/* No IDE functionality */
+
+#if 0
+/*
+Scope (_SB) {
+ Device(PCI0) {
+ Device(IDEC) {
+ Name(_ADR, 0x00140001)
+ #include "ide.asl"
+ }
+ }
+}
+*/
+
+/* Some timing tables */
+Name(UDTT, Package(){ /* Udma timing table */
+ 120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */
+})
+
+Name(MDTT, Package(){ /* MWDma timing table */
+ 480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */
+})
+
+Name(POTT, Package(){ /* Pio timing table */
+ 600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */
+})
+
+/* Some timing register value tables */
+Name(MDRT, Package(){ /* MWDma timing register table */
+ 0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */
+})
+
+Name(PORT, Package(){
+ 0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */
+})
+
+OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
+ Field(ICRG, AnyAcc, NoLock, Preserve)
+{
+ PPTS, 8, /* Primary PIO Slave Timing */
+ PPTM, 8, /* Primary PIO Master Timing */
+ OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */
+ PMTM, 8, /* Primary MWDMA Master Timing */
+ OFFSET(0x08), PPCR, 8, /* Primary PIO Control */
+ OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */
+ PPSM, 4, /* Primary PIO slave Mode */
+ OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */
+ OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */
+ PDSM, 4, /* Primary UltraDMA Mode */
+}
+
+Method(GTTM, 1) /* get total time*/
+{
+ Store(And(Arg0, 0x0F), Local0) /* Recovery Width */
+ Increment(Local0)
+ Store(ShiftRight(Arg0, 4), Local1) /* Command Width */
+ Increment(Local1)
+ Return(Multiply(30, Add(Local0, Local1)))
+}
+
+Device(PRID)
+{
+ Name (_ADR, Zero)
+ Method(_GTM, 0)
+ {
+ NAME(OTBF, Buffer(20) { /* out buffer */
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+ })
+
+ CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */
+ CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */
+ CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */
+ CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
+ CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
+
+ /* Just return if the channel is disabled */
+ If(And(PPCR, 0x01)) { /* primary PIO control */
+ Return(OTBF)
+ }
+
+ /* Always tell them independent timing available and IOChannelReady used on both drives */
+ Or(BFFG, 0x1A, BFFG)
+
+ /* save total time of primary PIO master timing to PIO spd0 */
+ Store(GTTM(PPTM), PSD0)
+ /* save total time of primary PIO slave Timing to PIO spd1 */
+ Store(GTTM(PPTS), PSD1)
+
+ If(And(PDCR, 0x01)) { /* It's under UDMA mode */
+ Or(BFFG, 0x01, BFFG)
+ Store(DerefOf(Index(UDTT, PDMM)), DSD0)
+ }
+ Else {
+ Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */
+ }
+
+ If(And(PDCR, 0x02)) { /* It's under UDMA mode */
+ Or(BFFG, 0x04, BFFG)
+ Store(DerefOf(Index(UDTT, PDSM)), DSD1)
+ }
+ Else {
+ Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */
+ }
+
+ Return(OTBF) /* out buffer */
+ } /* End Method(_GTM) */
+
+ Method(_STM, 3, NotSerialized)
+ {
+ NAME(INBF, Buffer(20) { /* in buffer */
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
+ })
+
+ CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */
+ CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */
+ CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */
+ CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
+ CreateDwordField(INBF, 16, BFFG) /*buffer flag */
+
+ Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
+ Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
+ Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
+ Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
+
+ Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
+ Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
+
+ If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */
+ Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
+ Divide(Local0, 7, PDMM,)
+ Or(PDCR, 0x01, PDCR)
+ }
+ Else {
+ If(LNotEqual(DSD0, 0xFFFFFFFF)) {
+ Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
+ Store(DerefOf(Index(MDRT, Local0)), PMTM)
+ }
+ }
+
+ If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */
+ Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
+ Divide(Local0, 7, PDSM,)
+ Or(PDCR, 0x02, PDCR)
+ }
+ Else {
+ If(LNotEqual(DSD1, 0xFFFFFFFF)) {
+ Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
+ Store(DerefOf(Index(MDRT, Local0)), PMTS)
+ }
+ }
+ /* Return(INBF) */
+ } /*End Method(_STM) */
+ Device(MST)
+ {
+ Name(_ADR, 0)
+ Method(_GTF) {
+ Name(CMBF, Buffer(21) {
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+ })
+ CreateByteField(CMBF, 1, POMD)
+ CreateByteField(CMBF, 8, DMMD)
+ CreateByteField(CMBF, 5, CMDA)
+ CreateByteField(CMBF, 12, CMDB)
+ CreateByteField(CMBF, 19, CMDC)
+
+ Store(0xA0, CMDA)
+ Store(0xA0, CMDB)
+ Store(0xA0, CMDC)
+
+ Or(PPMM, 0x08, POMD)
+
+ If(And(PDCR, 0x01)) {
+ Or(PDMM, 0x40, DMMD)
+ }
+ Else {
+ Store(Match
+ (MDTT, MLE, GTTM(PMTM),
+ MTR, 0, 0), Local0)
+ If(LLess(Local0, 3)) {
+ Or(0x20, Local0, DMMD)
+ }
+ }
+ Return(CMBF)
+ }
+ } /* End Device(MST) */
+
+ Device(SLAV)
+ {
+ Name(_ADR, 1)
+ Method(_GTF) {
+ Name(CMBF, Buffer(21) {
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
+ })
+ CreateByteField(CMBF, 1, POMD)
+ CreateByteField(CMBF, 8, DMMD)
+ CreateByteField(CMBF, 5, CMDA)
+ CreateByteField(CMBF, 12, CMDB)
+ CreateByteField(CMBF, 19, CMDC)
+
+ Store(0xB0, CMDA)
+ Store(0xB0, CMDB)
+ Store(0xB0, CMDC)
+
+ Or(PPSM, 0x08, POMD)
+
+ If(And(PDCR, 0x02)) {
+ Or(PDSM, 0x40, DMMD)
+ }
+ Else {
+ Store(Match
+ (MDTT, MLE, GTTM(PMTS),
+ MTR, 0, 0), Local0)
+ If(LLess(Local0, 3)) {
+ Or(0x20, Local0, DMMD)
+ }
+ }
+ Return(CMBF)
+ }
+ } /* End Device(SLAV) */
+}
+#endif
diff --git a/src/mainboard/bap/ode_e20XX/acpi/mainboard.asl b/src/mainboard/bap/ode_e20XX/acpi/mainboard.asl
new file mode 100644
index 0000000..da4f11a
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/acpi/mainboard.asl
@@ -0,0 +1,41 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+/* Memory related values */
+Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
+Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+Name(PBLN, 0x0) /* Length of BIOS area */
+
+Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */
+Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */
+Name(HPBA, 0xFED00000) /* Base address of HPET table */
+
+Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+/* Some global data */
+Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+Name(OSV, Ones) /* Assume nothing */
+Name(PMOD, One) /* Assume APIC */
+
+/* AcpiGpe0Blk */
+OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04)
+ Field(GP0B, ByteAcc, NoLock, Preserve) {
+ , 11,
+ USBS, 1,
+}
diff --git a/src/mainboard/bap/ode_e20XX/acpi/routing.asl b/src/mainboard/bap/ode_e20XX/acpi/routing.asl
new file mode 100644
index 0000000..73a040f
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/acpi/routing.asl
@@ -0,0 +1,197 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+ )
+ {
+ #include "routing.asl"
+ }
+*/
+
+/* Routing is in System Bus scope */
+Name(PR0, Package(){
+ /* NB devices */
+ /* Bus 0, Dev 0 - F16 Host Controller */
+
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+ /* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */
+ Package(){0x0001FFFF, 0, INTB, 0 },
+ Package(){0x0001FFFF, 1, INTC, 0 },
+
+
+ /* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */
+ Package(){0x0002FFFF, 0, INTC, 0 },
+ Package(){0x0002FFFF, 1, INTD, 0 },
+ Package(){0x0002FFFF, 2, INTA, 0 },
+ Package(){0x0002FFFF, 3, INTB, 0 },
+
+ /* FCH devices */
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */
+ Package(){0x0014FFFF, 0, INTA, 0 },
+ Package(){0x0014FFFF, 1, INTB, 0 },
+ Package(){0x0014FFFF, 2, INTC, 0 },
+ Package(){0x0014FFFF, 3, INTD, 0 },
+
+ /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */
+ /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */
+ Package(){0x0012FFFF, 0, INTC, 0 },
+ Package(){0x0012FFFF, 1, INTB, 0 },
+
+ Package(){0x0013FFFF, 0, INTC, 0 },
+ Package(){0x0013FFFF, 1, INTB, 0 },
+
+ Package(){0x0016FFFF, 0, INTC, 0 },
+ Package(){0x0016FFFF, 1, INTB, 0 },
+
+ /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */
+ Package(){0x0010FFFF, 0, INTC, 0 },
+ Package(){0x0010FFFF, 1, INTB, 0 },
+
+ /* Bus 0, Dev 17 - SATA controller */
+ Package(){0x0011FFFF, 0, INTD, 0 },
+
+})
+
+Name(APR0, Package(){
+ /* NB devices in APIC mode */
+ /* Bus 0, Dev 0 - F15 Host Controller */
+
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+ Package(){0x0001FFFF, 0, 0, 44 },
+ Package(){0x0001FFFF, 1, 0, 45 },
+
+ /* Bus 0, Dev 2 - PCIe Bridges */
+ Package(){0x0002FFFF, 0, 0, 18 },
+ Package(){0x0002FFFF, 1, 0, 19 },
+ Package(){0x0002FFFF, 2, 0, 16 },
+ Package(){0x0002FFFF, 3, 0, 17 },
+
+
+ /* SB devices in APIC mode */
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */
+ Package(){0x0014FFFF, 0, 0, 16 },
+ Package(){0x0014FFFF, 1, 0, 17 },
+ Package(){0x0014FFFF, 2, 0, 18 },
+ Package(){0x0014FFFF, 3, 0, 19 },
+
+ /* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */
+ /* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */
+ Package(){0x0012FFFF, 0, 0, 18 },
+ Package(){0x0012FFFF, 1, 0, 17 },
+
+ Package(){0x0013FFFF, 0, 0, 18 },
+ Package(){0x0013FFFF, 1, 0, 17 },
+
+ Package(){0x0016FFFF, 0, 0, 18 },
+ Package(){0x0016FFFF, 1, 0, 17 },
+
+ /* Bus 0, Dev 10 - USB: XHCI func 0, 1 */
+ Package(){0x0010FFFF, 0, 0, 0x12},
+ Package(){0x0010FFFF, 1, 0, 0x11},
+
+ /* Bus 0, Dev 17 - SATA controller */
+ Package(){0x0011FFFF, 0, 0, 19 },
+
+})
+
+Name(PS2, Package(){
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+})
+Name(APS2, Package(){
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+})
+
+/* GFX */
+Name(PS4, Package(){
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+})
+Name(APS4, Package(){
+ /* PCIe slot - Hooked to PCIe slot 4 */
+ Package(){0x0000FFFF, 0, 0, 16 },
+ Package(){0x0000FFFF, 1, 0, 17 },
+ Package(){0x0000FFFF, 2, 0, 18 },
+ Package(){0x0000FFFF, 3, 0, 19 },
+})
+
+/* GPP 0 */
+Name(PS5, Package(){
+ Package(){0x0000FFFF, 0, INTB, 0 },
+ Package(){0x0000FFFF, 1, INTC, 0 },
+ Package(){0x0000FFFF, 2, INTD, 0 },
+ Package(){0x0000FFFF, 3, INTA, 0 },
+})
+Name(APS5, Package(){
+ Package(){0x0000FFFF, 0, 0, 17 },
+ Package(){0x0000FFFF, 1, 0, 18 },
+ Package(){0x0000FFFF, 2, 0, 19 },
+ Package(){0x0000FFFF, 3, 0, 16 },
+})
+
+/* GPP 1 */
+Name(PS6, Package(){
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+})
+Name(APS6, Package(){
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+})
+
+/* GPP 2 */
+Name(PS7, Package(){
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+})
+Name(APS7, Package(){
+ Package(){0x0000FFFF, 0, 0, 19 },
+ Package(){0x0000FFFF, 1, 0, 16 },
+ Package(){0x0000FFFF, 2, 0, 17 },
+ Package(){0x0000FFFF, 3, 0, 18 },
+})
+
+/* GPP 3 */
+Name(PS8, Package(){
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+})
+Name(APS8, Package(){
+ Package(){0x0000FFFF, 0, 0, 16 },
+ Package(){0x0000FFFF, 1, 0, 17 },
+ Package(){0x0000FFFF, 2, 0, 18 },
+ Package(){0x0000FFFF, 3, 0, 19 },
+})
diff --git a/src/mainboard/bap/ode_e20XX/acpi/sata.asl b/src/mainboard/bap/ode_e20XX/acpi/sata.asl
new file mode 100644
index 0000000..9a96a9d
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/acpi/sata.asl
@@ -0,0 +1,150 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012-2013 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+/* No SATA functionality */
+
+#if 0
+/*
+Scope (_SB) {
+ Device(PCI0) {
+ Device(SATA) {
+ Name(_ADR, 0x00110000)
+ #include "sata.asl"
+ }
+ }
+}
+*/
+
+Name(STTM, Buffer(20) {
+ 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+ 0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+ 0x1f, 0x00, 0x00, 0x00
+})
+
+/* Start by clearing the PhyRdyChg bits */
+Method(_INI) {
+ \_GPE._L1F()
+}
+
+Device(PMRY)
+{
+ Name(_ADR, 0)
+ Method(_GTM, 0x0, NotSerialized) {
+ Return(STTM)
+ }
+ Method(_STM, 0x3, NotSerialized) {}
+
+ Device(PMST) {
+ Name(_ADR, 0)
+ Method(_STA,0) {
+ if (LGreater(P0IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ }/* end of PMST */
+
+ Device(PSLA)
+ {
+ Name(_ADR, 1)
+ Method(_STA,0) {
+ if (LGreater(P1IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of PSLA */
+} /* end of PMRY */
+
+Device(SEDY)
+{
+ Name(_ADR, 1) /* IDE Scondary Channel */
+ Method(_GTM, 0x0, NotSerialized) {
+ Return(STTM)
+ }
+ Method(_STM, 0x3, NotSerialized) {}
+
+ Device(SMST)
+ {
+ Name(_ADR, 0)
+ Method(_STA,0) {
+ if (LGreater(P2IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of SMST */
+
+ Device(SSLA)
+ {
+ Name(_ADR, 1)
+ Method(_STA,0) {
+ if (LGreater(P3IS,0)) {
+ return (0x0F) /* sata is visible */
+ }
+ else {
+ return (0x00) /* sata is missing */
+ }
+ }
+ } /* end of SSLA */
+} /* end of SEDY */
+
+/* SATA Hot Plug Support */
+Scope(\_GPE) {
+ Method(_L1F,0x0,NotSerialized) {
+ if (\_SB.P0PR) {
+ if (LGreater(\_SB.P0IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P0PR)
+ }
+
+ if (\_SB.P1PR) {
+ if (LGreater(\_SB.P1IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P1PR)
+ }
+
+ if (\_SB.P2PR) {
+ if (LGreater(\_SB.P2IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P2PR)
+ }
+
+ if (\_SB.P3PR) {
+ if (LGreater(\_SB.P3IS,0)) {
+ sleep(32)
+ }
+ Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+ store(one, \_SB.P3PR)
+ }
+ }
+}
+#endif
diff --git a/src/mainboard/bap/ode_e20XX/acpi/si.asl b/src/mainboard/bap/ode_e20XX/acpi/si.asl
new file mode 100644
index 0000000..2ec5fb6
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/acpi/si.asl
@@ -0,0 +1,27 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+Scope(\_SI) {
+ Method(_SST, 1) {
+ /* DBGO("\\_SI\\_SST\n") */
+ /* DBGO(" New Indicator state: ") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+ }
+} /* End Scope SI */
diff --git a/src/mainboard/bap/ode_e20XX/acpi/sleep.asl b/src/mainboard/bap/ode_e20XX/acpi/sleep.asl
new file mode 100644
index 0000000..6a2cef9
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/acpi/sleep.asl
@@ -0,0 +1,97 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+/* Wake status package */
+Name(WKST,Package(){Zero, Zero})
+
+/*
+* \_PTS - Prepare to Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2, etc
+*
+* Exit:
+* -none-
+*
+* The _PTS control method is executed at the beginning of the sleep process
+* for S1-S5. The sleeping value is passed to the _PTS control method. This
+* control method may be executed a relatively long time before entering the
+* sleep state and the OS may abort the operation without notification to
+* the ACPI driver. This method cannot modify the configuration or power
+* state of any device in the system.
+*/
+
+External(\_SB.APTS, MethodObj)
+External(\_SB.AWAK, MethodObj)
+
+Method(_PTS, 1) {
+ /* DBGO("\\_PTS\n") */
+ /* DBGO("From S0 to S") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+
+ /* Clear wake status structure. */
+ Store(0, Index(WKST,0))
+ Store(0, Index(WKST,1))
+ Store(7, UPWS)
+ \_SB.APTS(Arg0)
+} /* End Method(\_PTS) */
+
+/*
+* \_BFS OEM Back From Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* -none-
+*/
+Method(\_BFS, 1) {
+ /* DBGO("\\_BFS\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+}
+
+/*
+* \_WAK System Wake method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* Return package of 2 DWords
+* Dword 1 - Status
+* 0x00000000 wake succeeded
+* 0x00000001 Wake was signaled but failed due to lack of power
+* 0x00000002 Wake was signaled but failed due to thermal condition
+* Dword 2 - Power Supply state
+* if non-zero the effective S-state the power supply entered
+*/
+Method(\_WAK, 1) {
+ /* DBGO("\\_WAK\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+ Store(1,USBS)
+
+ \_SB.AWAK(Arg0)
+
+ Return(WKST)
+} /* End Method(\_WAK) */
diff --git a/src/mainboard/bap/ode_e20XX/acpi/superio.asl b/src/mainboard/bap/ode_e20XX/acpi/superio.asl
new file mode 100644
index 0000000..3a3ccdf
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/acpi/superio.asl
@@ -0,0 +1,52 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 BAP - Bruhnspace Advanced Projects
+ * (Written by Fabian Kunkel <fabi at adv.bruhnspace.com> for BAP)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+/* SuperIO support for Windows */
+
+Device (UAR1) {
+ Name (_HID, EISAID ("PNP0501"))
+ Name (_UID, 1)
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x03F8, 0x03F8, 0x08, 0x08)
+ IRQNoFlags () {4}
+ })
+ Name (_PRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x03F8, 0x03F8, 0x08, 0x08)
+ IRQNoFlags () {4}
+ })
+}
+
+Device (UAR2) {
+ Name (_HID, EISAID ("PNP0501"))
+ Name (_UID, 2)
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x02F8, 0x02F8, 0x08, 0x08)
+ IRQNoFlags () {3}
+ })
+ Name (_PRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x02F8, 0x02F8, 0x08, 0x08)
+ IRQNoFlags () {3}
+ })
+}
diff --git a/src/mainboard/bap/ode_e20XX/acpi/thermal.asl b/src/mainboard/bap/ode_e20XX/acpi/thermal.asl
new file mode 100644
index 0000000..4c24d96
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/acpi/thermal.asl
@@ -0,0 +1,20 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+/* No thermal zone functionality */
diff --git a/src/mainboard/bap/ode_e20XX/acpi/usb_oc.asl b/src/mainboard/bap/ode_e20XX/acpi/usb_oc.asl
new file mode 100644
index 0000000..07ca7b4
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/acpi/usb_oc.asl
@@ -0,0 +1,132 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+/* simple name description */
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+ )
+ {
+ #include "usb.asl"
+ }
+*/
+
+/* USB overcurrent mapping pins. */
+Name(UOM0, 0)
+Name(UOM1, 2)
+Name(UOM2, 0)
+Name(UOM3, 7)
+Name(UOM4, 2)
+Name(UOM5, 2)
+Name(UOM6, 6)
+Name(UOM7, 2)
+Name(UOM8, 6)
+Name(UOM9, 6)
+
+/* USB Overcurrent GPEs */
+
+#if 0 /* TODO: Update */
+Method(UCOC, 0) {
+ Sleep(20)
+ Store(0x13,CMTI)
+ Store(0,GPSL)
+}
+
+/* USB Port 0 overcurrent uses Gpm 0 */
+If(LLessEqual(UOM0,9)) {
+ Scope (\_GPE) {
+ Method (_L13) {
+ }
+ }
+}
+
+/* USB Port 1 overcurrent uses Gpm 1 */
+If (LLessEqual(UOM1,9)) {
+ Scope (\_GPE) {
+ Method (_L14) {
+ }
+ }
+}
+
+/* USB Port 2 overcurrent uses Gpm 2 */
+If (LLessEqual(UOM2,9)) {
+ Scope (\_GPE) {
+ Method (_L15) {
+ }
+ }
+}
+
+/* USB Port 3 overcurrent uses Gpm 3 */
+If (LLessEqual(UOM3,9)) {
+ Scope (\_GPE) {
+ Method (_L16) {
+ }
+ }
+}
+
+/* USB Port 4 overcurrent uses Gpm 4 */
+If (LLessEqual(UOM4,9)) {
+ Scope (\_GPE) {
+ Method (_L19) {
+ }
+ }
+}
+
+/* USB Port 5 overcurrent uses Gpm 5 */
+If (LLessEqual(UOM5,9)) {
+ Scope (\_GPE) {
+ Method (_L1A) {
+ }
+ }
+}
+
+/* USB Port 6 overcurrent uses Gpm 6 */
+If (LLessEqual(UOM6,9)) {
+ Scope (\_GPE) {
+ /* Method (_L1C) { */
+ Method (_L06) {
+ }
+ }
+}
+
+/* USB Port 7 overcurrent uses Gpm 7 */
+If (LLessEqual(UOM7,9)) {
+ Scope (\_GPE) {
+ /* Method (_L1D) { */
+ Method (_L07) {
+ }
+ }
+}
+
+/* USB Port 8 overcurrent uses Gpm 8 */
+If (LLessEqual(UOM8,9)) {
+ Scope (\_GPE) {
+ Method (_L17) {
+ }
+ }
+}
+
+/* USB Port 9 overcurrent uses Gpm 9 */
+If (LLessEqual(UOM9,9)) {
+ Scope (\_GPE) {
+ Method (_L0E) {
+ }
+ }
+}
+#endif
diff --git a/src/mainboard/bap/ode_e20XX/acpi_tables.c b/src/mainboard/bap/ode_e20XX/acpi_tables.c
new file mode 100644
index 0000000..6c061e0
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/acpi_tables.c
@@ -0,0 +1,60 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/ioapic.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam16.h>
+
+#include <northbridge/amd/agesa/agesawrapper.h>
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write SB800 IOAPIC, only one */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS,
+ IO_APIC_ADDR, 0);
+
+ /* TODO: Remove the hardcode */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1,
+ 0xFEC20000, 24);
+
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0);
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, 0xF);
+ /* 0: mean bus 0--->ISA */
+ /* 0: PIC 0 */
+ /* 2: APIC 2 */
+ /* 5 mean: 0101 --> Edge-triggered, Active high */
+
+ /* create all subtables for processors */
+ current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1);
+ /* 1: LINT1 connect to NMI */
+
+ return current;
+}
diff --git a/src/mainboard/bap/ode_e20XX/board_info.txt b/src/mainboard/bap/ode_e20XX/board_info.txt
new file mode 100644
index 0000000..b351b8e
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/board_info.txt
@@ -0,0 +1 @@
+Category: eval
diff --git a/src/mainboard/bap/ode_e20XX/buildOpts.c b/src/mainboard/bap/ode_e20XX/buildOpts.c
new file mode 100644
index 0000000..ab9a18a
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/buildOpts.c
@@ -0,0 +1,466 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+/**
+ * @file
+ *
+ * AMD User options selection for a Brazos platform solution system
+ *
+ * This file is placed in the user's platform directory and contains the
+ * build option selections desired for that platform.
+ *
+ * For Information about this file, see @ref platforminstall.
+ *
+ */
+
+#include <stdlib.h>
+#include "AGESA.h"
+//#include "CommonReturns.h"
+#include "Filecode.h"
+#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE
+
+#define INSTALL_FT3_SOCKET_SUPPORT TRUE
+#define INSTALL_FAMILY_16_MODEL_0x_SUPPORT TRUE
+
+#define INSTALL_G34_SOCKET_SUPPORT FALSE
+#define INSTALL_C32_SOCKET_SUPPORT FALSE
+#define INSTALL_S1G3_SOCKET_SUPPORT FALSE
+#define INSTALL_S1G4_SOCKET_SUPPORT FALSE
+#define INSTALL_ASB2_SOCKET_SUPPORT FALSE
+#define INSTALL_FS1_SOCKET_SUPPORT FALSE
+#define INSTALL_FM1_SOCKET_SUPPORT FALSE
+#define INSTALL_FP2_SOCKET_SUPPORT FALSE
+#define INSTALL_FT1_SOCKET_SUPPORT FALSE
+#define INSTALL_AM3_SOCKET_SUPPORT FALSE
+#define INSTALL_FM2_SOCKET_SUPPORT FALSE
+
+
+#ifdef BLDOPT_REMOVE_FT3_SOCKET_SUPPORT
+ #if BLDOPT_REMOVE_FT3_SOCKET_SUPPORT == TRUE
+ #undef INSTALL_FT3_SOCKET_SUPPORT
+ #define INSTALL_FT3_SOCKET_SUPPORT FALSE
+ #endif
+#endif
+
+//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE
+//#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE
+#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE
+//#define BLDOPT_REMOVE_ECC_SUPPORT TRUE
+//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE
+//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE
+#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE
+#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE
+#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE
+//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE
+#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE
+//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE
+#define BLDOPT_REMOVE_SRAT FALSE //TRUE
+#define BLDOPT_REMOVE_SLIT FALSE //TRUE
+#define BLDOPT_REMOVE_WHEA FALSE //TRUE
+#define BLDOPT_REMOVE_CRAT TRUE
+#define BLDOPT_REMOVE_CDIT TRUE
+#define BLDOPT_REMOVE_DMI TRUE
+//#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE
+
+//This element selects whether P-States should be forced to be independent,
+// as reported by the ACPI _PSD object. For single-link processors,
+// setting TRUE for OS to support this feature.
+
+//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE
+
+#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER
+/* Build configuration values here.
+ */
+#define BLDCFG_VRM_CURRENT_LIMIT 15000
+#define BLDCFG_VRM_NB_CURRENT_LIMIT 13000
+#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 21000
+#define BLDCFG_VRM_SVI_OCP_LEVEL BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT
+#define BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT 17000
+#define BLDCFG_VRM_NB_SVI_OCP_LEVEL BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT
+#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0
+#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 0
+#define BLDCFG_VRM_SLEW_RATE 10000
+#define BLDCFG_VRM_NB_SLEW_RATE BLDCFG_VRM_SLEW_RATE
+#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE
+
+#define BLDCFG_PLAT_NUM_IO_APICS 3
+#define BLDCFG_GNB_IOAPIC_ADDRESS 0xFEC20000
+#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST
+#define BLDCFG_MEM_INIT_PSTATE 0
+#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770 // Specifies the IO addresses trapped by the
+ // core for C-state entry requests. A value
+ // of 0 in this field specifies that the core
+ // does not trap any IO addresses for C-state entry.
+ // Values greater than 0xFFF8 results in undefined behavior.
+#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770
+
+#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE
+
+#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR1866_FREQUENCY
+#define BLDCFG_MEMORY_MODE_UNGANGED TRUE
+#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE
+#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE
+#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE
+#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE
+#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE
+#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE
+#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE
+#define BLDCFG_MEMORY_POWER_DOWN TRUE
+#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT
+#define BLDCFG_ONLINE_SPARE FALSE
+#define BLDCFG_BANK_SWIZZLE TRUE
+#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO
+#define BLDCFG_MEMORY_CLOCK_SELECT DDR1866_FREQUENCY
+#define BLDCFG_DQS_TRAINING_CONTROL TRUE
+#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE
+#define BLDCFG_USE_BURST_MODE FALSE
+#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE
+#define BLDCFG_ENABLE_ECC_FEATURE TRUE
+#define BLDCFG_ECC_REDIRECTION FALSE
+#define BLDCFG_SCRUB_DRAM_RATE 0
+#define BLDCFG_SCRUB_L2_RATE 0
+#define BLDCFG_SCRUB_L3_RATE 0
+#define BLDCFG_SCRUB_IC_RATE 0
+#define BLDCFG_SCRUB_DC_RATE 0
+#define BLDCFG_ECC_SYNC_FLOOD TRUE
+#define BLDCFG_ECC_SYMBOL_SIZE 4
+#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000ul
+#define BLDCFG_1GB_ALIGN FALSE
+#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED
+#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO
+#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeDisabled
+#define BLDCFG_IOMMU_SUPPORT FALSE
+#define OPTION_GFX_INIT_SVIEW FALSE
+//#define BLDCFG_PLATFORM_POWER_POLICY_MODE BatteryLife
+
+//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL OEM_LCD_BACK_LIGHT_CONTROL
+#define BLDCFG_CFG_ABM_SUPPORT TRUE
+
+#define BLDCFG_CFG_GNB_HD_AUDIO TRUE
+//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID
+//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID
+//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID
+
+#ifdef PCIEX_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_BASE PCIEX_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_SIZE (PCIEX_LENGTH >> 20)
+#endif
+
+#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P'
+#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0'
+#define BLDCFG_PCIE_TRAINING_ALGORITHM PcieTrainingDistributed
+
+/* Process the options...
+ * This file include MUST occur AFTER the user option selection settings
+ */
+#define AGESA_ENTRY_INIT_RESET TRUE
+#define AGESA_ENTRY_INIT_RECOVERY FALSE
+#define AGESA_ENTRY_INIT_EARLY TRUE
+#define AGESA_ENTRY_INIT_POST TRUE
+#define AGESA_ENTRY_INIT_ENV TRUE
+#define AGESA_ENTRY_INIT_MID TRUE
+#define AGESA_ENTRY_INIT_LATE TRUE
+#define AGESA_ENTRY_INIT_S3SAVE TRUE
+#define AGESA_ENTRY_INIT_RESUME TRUE //TRUE
+#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE
+#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE
+/*
+ * Customized OEM build configurations for FCH component
+ */
+// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00
+// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20
+// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00
+// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400
+// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404
+// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408
+// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410
+// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420
+// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000
+// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000
+// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000
+// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0
+// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00
+// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000
+// #define BLDCFG_AZALIA_SSID 0x780D1022
+// #define BLDCFG_SMBUS_SSID 0x780B1022
+// #define BLDCFG_IDE_SSID 0x780C1022
+// #define BLDCFG_SATA_AHCI_SSID 0x78011022
+// #define BLDCFG_SATA_IDE_SSID 0x78001022
+// #define BLDCFG_SATA_RAID5_SSID 0x78031022
+// #define BLDCFG_SATA_RAID_SSID 0x78021022
+// #define BLDCFG_EHCI_SSID 0x78081022
+// #define BLDCFG_OHCI_SSID 0x78071022
+// #define BLDCFG_LPC_SSID 0x780E1022
+// #define BLDCFG_SD_SSID 0x78061022
+// #define BLDCFG_XHCI_SSID 0x78121022
+// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE
+// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE
+// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4
+// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE
+// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE
+// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE
+// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE
+
+CONST AP_MTRR_SETTINGS ROMDATA KabiniApMtrrSettingsList[] =
+{
+ { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E },
+ { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E },
+ { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 },
+ { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 },
+ { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 },
+ { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 },
+ { CPU_LIST_TERMINAL }
+};
+
+#define BLDCFG_AP_MTRR_SETTINGS_LIST &KabiniApMtrrSettingsList
+
+//#include "KeralaInstall.h"
+
+/* Include the files that instantiate the configuration definitions. */
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "AdvancedApi.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+#include "cpuFeatures.h"
+#include "Table.h"
+#include "CommonReturns.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "GnbInterface.h"
+
+ // This is the delivery package title, "BrazosPI"
+ // This string MUST be exactly 8 characters long
+#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'}
+
+ // This is the release version number of the AGESA component
+ // This string MUST be exactly 12 characters long
+#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '}
+
+/* MEMORY_BUS_SPEED */
+//#define DDR400_FREQUENCY 200 ///< DDR 400
+//#define DDR533_FREQUENCY 266 ///< DDR 533
+//#define DDR667_FREQUENCY 333 ///< DDR 667
+//#define DDR800_FREQUENCY 400 ///< DDR 800
+//#define DDR1066_FREQUENCY 533 ///< DDR 1066
+//#define DDR1333_FREQUENCY 667 ///< DDR 1333
+//#define DDR1600_FREQUENCY 800 ///< DDR 1600
+//#define DDR1866_FREQUENCY 933 ///< DDR 1866
+//#define DDR2100_FREQUENCY 1050 ///< DDR 2100
+//#define DDR2133_FREQUENCY 1066 ///< DDR 2133
+//#define DDR2400_FREQUENCY 1200 ///< DDR 2400
+//#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency
+//
+///* QUANDRANK_TYPE*/
+//#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM
+//#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM
+//
+///* USER_MEMORY_TIMING_MODE */
+//#define TIMING_MODE_AUTO 0 ///< Use best rate possible
+//#define TIMING_MODE_LIMITED 1 ///< Set user top limit
+//#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed
+//
+///* POWER_DOWN_MODE */
+//#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode
+//#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode
+
+/*
+ * Agesa optional capabilities selection.
+ * Uncomment and mark FALSE those features you wish to include in the build.
+ * Comment out or mark TRUE those features you want to REMOVE from the build.
+ */
+
+#define DFLT_SMBUS0_BASE_ADDRESS 0xB00
+#define DFLT_SMBUS1_BASE_ADDRESS 0xB20
+#define DFLT_SIO_PME_BASE_ADDRESS 0xE00
+#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800
+#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804
+#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808
+#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810
+#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820
+#define DFLT_SPI_BASE_ADDRESS 0xFEC10000
+#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0
+#define DFLT_HPET_BASE_ADDRESS 0xFED00000
+#define DFLT_SMI_CMD_PORT 0xB0
+#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00
+#define DFLT_GEC_BASE_ADDRESS 0xFED61000
+#define DFLT_AZALIA_SSID 0x780D1022
+#define DFLT_SMBUS_SSID 0x780B1022
+#define DFLT_IDE_SSID 0x780C1022
+#define DFLT_SATA_AHCI_SSID 0x78011022
+#define DFLT_SATA_IDE_SSID 0x78001022
+#define DFLT_SATA_RAID5_SSID 0x78031022
+#define DFLT_SATA_RAID_SSID 0x78021022
+#define DFLT_EHCI_SSID 0x78081022
+#define DFLT_OHCI_SSID 0x78071022
+#define DFLT_LPC_SSID 0x780E1022
+#define DFLT_SD_SSID 0x78061022
+#define DFLT_XHCI_SSID 0x78121022
+#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE
+#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE
+#define DFLT_FCH_GPP_LINK_CONFIG PortA4
+#define DFLT_FCH_GPP_PORT0_PRESENT FALSE
+#define DFLT_FCH_GPP_PORT1_PRESENT FALSE
+#define DFLT_FCH_GPP_PORT2_PRESENT FALSE
+#define DFLT_FCH_GPP_PORT3_PRESENT FALSE
+#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE
+//#define BLDCFG_IR_PIN_CONTROL 0x33
+
+GPIO_CONTROL gizmo2_gpio[] = {
+ {183, Function1, GpioIn | GpioOutEnB | PullUpB},
+ {-1}
+};
+//#define BLDCFG_FCH_GPIO_CONTROL_LIST (&gizmo2_gpio[0])
+
+// The following definitions specify the default values for various parameters in which there are
+// no clearly defined defaults to be used in the common file. The values below are based on product
+// and BKDG content, please consult the AGESA Memory team for consultation.
+#define DFLT_SCRUB_DRAM_RATE (0)
+#define DFLT_SCRUB_L2_RATE (0)
+#define DFLT_SCRUB_L3_RATE (0)
+#define DFLT_SCRUB_IC_RATE (0)
+#define DFLT_SCRUB_DC_RATE (0)
+#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define DFLT_VRM_SLEW_RATE (5000)
+
+#include "PlatformInstall.h"
+
+/*----------------------------------------------------------------------------------------
+ * CUSTOMER OVERIDES MEMORY TABLE
+ *----------------------------------------------------------------------------------------
+ */
+
+/*
+ * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
+ * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
+ * is populated, AGESA will base its settings on the data from the table. Otherwise, it will
+ * use its default conservative settings.
+ */
+CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
+ //
+ // The following macros are supported (use comma to separate macros):
+ //
+ // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap)
+ // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap.
+ // AGESA will base on this value to disable unused MemClk to save power.
+ // Example:
+ // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below:
+ // Bit AM3/S1g3 pin name
+ // 0 M[B,A]_CLK_H/L[0]
+ // 1 M[B,A]_CLK_H/L[1]
+ // 2 M[B,A]_CLK_H/L[2]
+ // 3 M[B,A]_CLK_H/L[3]
+ // 4 M[B,A]_CLK_H/L[4]
+ // 5 M[B,A]_CLK_H/L[5]
+ // 6 M[B,A]_CLK_H/L[6]
+ // 7 M[B,A]_CLK_H/L[7]
+ // And platform has the following routing:
+ // CS0 M[B,A]_CLK_H/L[4]
+ // CS1 M[B,A]_CLK_H/L[2]
+ // CS2 M[B,A]_CLK_H/L[3]
+ // CS3 M[B,A]_CLK_H/L[5]
+ // Then platform can specify the following macro:
+ // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00)
+ //
+ // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap)
+ // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap.
+ // AGESA will base on this value to tristate unused CKE to save power.
+ //
+ // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap)
+ // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap.
+ // AGESA will base on this value to tristate unused ODT pins to save power.
+ //
+ // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap)
+ // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap.
+ // AGESA will base on this value to tristate unused Chip select to save power.
+ //
+ // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel)
+ // Specifies the number of DIMM slots per channel.
+ //
+ // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel)
+ // Specifies the number of Chip selects per channel.
+ //
+ // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket)
+ // Specifies the number of channels per socket.
+ //
+ // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED)
+ // Specifies DDR bus speed of channel ChannelID on socket SocketID.
+ //
+ // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE)
+ // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...)
+ //
+ // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+ // Byte6Seed, Byte7Seed, ByteEccSeed)
+ // Specifies the write leveling seed for a channel of a socket.
+ //
+ // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+ // Byte6Seed, Byte7Seed, ByteEccSeed)
+ // Speicifes the HW RXEN training seed for a channel of a socket
+ //
+
+ #define SEED_WL 0x0E
+ WRITE_LEVELING_SEED(
+ ANY_SOCKET, CHANNEL_A, ALL_DIMMS,
+ SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,SEED_WL,
+ SEED_WL),
+
+ #define SEED_A 0x12
+ HW_RXEN_SEED(
+ ANY_SOCKET, CHANNEL_A, ALL_DIMMS,
+ SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A,
+ SEED_A),
+
+ NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1),
+ NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 1),
+ MOTHER_BOARD_LAYERS (LAYERS_6),
+
+ MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
+ CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */
+ ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08),
+ CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00),
+
+ PSO_END
+};
+
+/*
+ * These tables are optional and may be used to adjust memory timing settings
+ */
+#include "mm.h"
+#include "mn.h"
+
diff --git a/src/mainboard/bap/ode_e20XX/cmos.layout b/src/mainboard/bap/ode_e20XX/cmos.layout
new file mode 100644
index 0000000..50750a8
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/cmos.layout
@@ -0,0 +1,79 @@
+#*****************************************************************************
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+#*****************************************************************************
+
+entries
+
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 multi_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+456 1 e 1 ECC_memory
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 amd_reserved
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+8 0 400Mhz
+8 1 333Mhz
+8 2 266Mhz
+8 3 200Mhz
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
diff --git a/src/mainboard/bap/ode_e20XX/devicetree.cb b/src/mainboard/bap/ode_e20XX/devicetree.cb
new file mode 100644
index 0000000..fb00813
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/devicetree.cb
@@ -0,0 +1,117 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2013 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc.
+#
+chip northbridge/amd/agesa/family16kb/root_complex
+ device cpu_cluster 0 on
+ chip cpu/amd/agesa/family16kb
+ device lapic 0 on end
+ end
+ end
+
+ device domain 0 on
+ subsystemid 0x1022 0x1410 inherit
+ chip northbridge/amd/agesa/family16kb # CPU side of HT root complex
+
+ chip northbridge/amd/agesa/family16kb # PCI side of HT root complex
+ device pci 0.0 on end # Root Complex
+ device pci 1.0 on end # Internal Graphics P2P bridge 0x9835
+ device pci 1.1 on end # Internal Multimedia
+ device pci 2.0 on end # PCIe Host Bridge
+ device pci 2.1 on end # x4 PCIe Slot
+ device pci 2.2 on end # PCIe Q7 Realtek GBit LAN
+ device pci 2.3 on end # PCIe CB Realtek GBit LAN
+ device pci 2.4 on end # PCIe BAP FPGA
+ device pci 2.5 on end # PCIe BAP FPGA (unused, for 050T)
+ end #chip northbridge/amd/agesa/family16kb
+
+ chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus
+ device pci 10.0 on end # XHCI HC0
+ device pci 11.0 on end # SATA
+ device pci 12.0 on end # USB
+ device pci 12.2 on end # USB
+ device pci 13.0 on end # USB
+ device pci 13.2 on end # USB
+ device pci 14.0 on end # SM
+ device pci 14.2 on end # HDA 0x4383
+ device pci 14.3 on # LPC 0x439d
+ chip superio/fintek/f81866d
+ register "hwm_amd_tsi_addr" = "0x98" # Set to AMD
+ register "hwm_amd_tsi_control" = "0x02" # Set to AMD
+ register "hwm_fan_select" = "0xC0" # Sets Fan2 to PWM
+ register "hwm_fan_mode" = "0xD5" # Sets FAN1-3 to Auto RPM mode
+ register "hwm_fan3_control" = "0x00" # Fan control 23kHz
+ register "hwm_fan2_temp_map_select" = "0x1E" # Fan control 23kHz
+ register "hwm_fan2_bound1" = "0x3C" # 60°C
+ register "hwm_fan2_bound2" = "0x32" # 50°C
+ register "hwm_fan2_bound3" = "0x28" # 40°C
+ register "hwm_fan2_bound4" = "0x1E" # 30°C
+ register "hwm_fan2_seg1_speed" = "0xFF" # 100%
+ register "hwm_fan2_seg2_speed" = "0xD9" # 85%
+ register "hwm_fan2_seg3_speed" = "0xB2" # 70%
+ register "hwm_fan2_seg4_speed" = "0x99" # 60%
+ register "hwm_fan2_seg5_speed" = "0x80" # 50%
+ register "hwm_temp_sens_type" = "0x04" # Sets temp sensor 1 type to to thermistor
+ device pnp 4e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 4e.3 off end # Parallel Port
+ device pnp 4e.4 on # Hardware Monitor
+ io 0x60 = 0x295
+ irq 0x70 = 0
+ end
+ device pnp 4e.5 off # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ device pnp 4e.6 off end # GPIO
+ device pnp 4e.7 on end # WDT
+ device pnp 4e.a off end # PME
+ device pnp 4e.10 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 4e.11 on # COM2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 4e.12 off # COM3
+ end
+ device pnp 4e.13 off # COM4
+ end
+ device pnp 4e.14 off # COM5
+ end
+ device pnp 4e.15 off # COM6
+ end
+ end # f81866d
+ end #LPC
+ device pci 14.7 on end # SD
+ end #chip southbridge/amd/hudson
+
+ device pci 18.0 on end
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ device pci 18.4 on end
+ device pci 18.5 on end
+
+ end #chip northbridge/amd/agesa/family16kb # CPU side of HT root complex
+ end #domain
+end #northbridge/amd/agesa/family16kb/root_complex
diff --git a/src/mainboard/bap/ode_e20XX/dsdt.asl b/src/mainboard/bap/ode_e20XX/dsdt.asl
new file mode 100644
index 0000000..3f1aa8b
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/dsdt.asl
@@ -0,0 +1,91 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+ "DSDT.AML", /* Output filename */
+ "DSDT", /* Signature */
+ 0x02, /* DSDT Revision, needs to be 2 for 64bit */
+ "AMD ", /* OEMID */
+ "COREBOOT", /* TABLE ID */
+ 0x00010001 /* OEM Revision */
+ )
+{ /* Start of ASL file */
+ /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */
+
+ /* Globals for the platform */
+ #include "acpi/mainboard.asl"
+
+ /* Describe the USB Overcurrent pins */
+ #include "acpi/usb_oc.asl"
+
+ /* PCI IRQ mapping for the Southbridge */
+ #include <southbridge/amd/agesa/hudson/acpi/pcie.asl>
+
+ /* Describe the processor tree (\_PR) */
+ #include <cpu/amd/agesa/family16kb/acpi/cpu.asl>
+
+ /* Contains the supported sleep states for this chipset */
+ #include <southbridge/amd/agesa/hudson/acpi/sleepstates.asl>
+
+ /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */
+ #include "acpi/sleep.asl"
+
+ /* System Bus */
+ Scope(\_SB) { /* Start \_SB scope */
+ /* global utility methods expected within the \_SB scope */
+ #include <arch/x86/acpi/globutil.asl>
+
+ /* Describe IRQ Routing mapping for this platform (within the \_SB scope) */
+ #include "acpi/routing.asl"
+
+ Device(PWRB) {
+ Name(_HID, EISAID("PNP0C0C"))
+ Name(_UID, 0xAA)
+ Name(_PRW, Package () {3, 0x04})
+ Name(_STA, 0x0B)
+ }
+
+ Device(PCI0) {
+ /* Describe the AMD Northbridge */
+ #include <northbridge/amd/agesa/family16kb/acpi/northbridge.asl>
+
+ /* Describe the AMD Fusion Controller Hub Southbridge */
+ #include <southbridge/amd/agesa/hudson/acpi/fch.asl>
+ }
+
+ /* Describe PCI INT[A-H] for the Southbridge */
+ #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl>
+
+ } /* End \_SB scope */
+
+ /* Describe SMBUS for the Southbridge */
+ #include <southbridge/amd/agesa/hudson/acpi/smbus.asl>
+
+ /* Define the General Purpose Events for the platform */
+ #include "acpi/gpe.asl"
+
+ /* Define the Thermal zones and methods for the platform */
+ #include "acpi/thermal.asl"
+
+ /* Define the System Indicators for the platform */
+ #include "acpi/si.asl"
+}
+/* End of ASL file */
diff --git a/src/mainboard/bap/ode_e20XX/irq_tables.c b/src/mainboard/bap/ode_e20XX/irq_tables.c
new file mode 100644
index 0000000..33ce343
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/irq_tables.c
@@ -0,0 +1,107 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+#include <cpu/amd/amdfam16.h>
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+ u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+ u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+ u8 slot, u8 rfu)
+{
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
+}
+
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ struct irq_routing_table *pirq;
+ struct irq_info *pirq_info;
+ u32 slot_num;
+ u8 *v;
+
+ u8 sum = 0;
+ int i;
+
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
+
+ /* This table must be between 0xf0000 & 0x100000 */
+ printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+ pirq = (void *)(addr);
+ v = (u8 *) (addr);
+
+ pirq->signature = PIRQ_SIGNATURE;
+ pirq->version = PIRQ_VERSION;
+
+ pirq->rtr_bus = 0;
+ pirq->rtr_devfn = PCI_DEVFN(0x14, 4);
+
+ pirq->exclusive_irqs = 0;
+
+ pirq->rtr_vendor = 0x1002;
+ pirq->rtr_device = 0x4384;
+
+ pirq->miniport_data = 0;
+
+ memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+ pirq_info = (void *)(&pirq->checksum + 1);
+ slot_num = 0;
+
+ /* pci bridge */
+ write_pirq_info(pirq_info, 0, PCI_DEVFN(0x14, 4),
+ 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+ 0);
+ pirq_info++;
+
+ slot_num++;
+
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
+
+ sum = pirq->checksum - sum;
+
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
+
+ printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+ return (unsigned long)pirq_info;
+}
diff --git a/src/mainboard/bap/ode_e20XX/mainboard.c b/src/mainboard/bap/ode_e20XX/mainboard.c
new file mode 100644
index 0000000..ab1bb8b
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/mainboard.c
@@ -0,0 +1,137 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <device/pci_def.h>
+#include <arch/acpi.h>
+#include <southbridge/amd/agesa/hudson/pci_devs.h>
+#include <southbridge/amd/agesa/hudson/amd_pci_int_defs.h>
+#include <southbridge/amd/common/amd_pci_util.h>
+#include <northbridge/amd/agesa/family16kb/pci_devs.h>
+#include <northbridge/amd/agesa/BiosCallOuts.h>
+#include <cpu/amd/agesa/s3_resume.h>
+#include <northbridge/amd/agesa/agesawrapper.h>
+
+/***********************************************************
+ * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01.
+ * This table is responsible for physically routing the PIC and
+ * IOAPIC IRQs to the different PCI devices on the system. It
+ * is read and written via registers 0xC00/0xC01 as an
+ * Index/Data pair. These values are chipset and mainboard
+ * dependent and should be updated accordingly.
+ *
+ * These values are used by the PCI configuration space,
+ * MP Tables. TODO: Make ACPI use these values too.
+ */
+const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = {
+ /* INTA# - INTH# */
+ [0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,
+ /* Misc-nil,0,1,2, INT from Serial irq */
+ [0x08] = 0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ /* SCI, SMBUS0, ASF, HDA, FC, RSVD, PerMon, SD */
+ [0x10] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
+ /* IMC INT0 - 5 */
+ [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
+ /* USB Devs 18/19/22 INTA-C */
+ [0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,
+ /* SATA */
+ [0x41] = 0x0F,
+};
+
+const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = {
+ /* INTA# - INTH# */
+ [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
+ /* Misc-nil,0,1,2, INT from Serial irq */
+ [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon, SD */
+ [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,
+ /* IMC INT0 - 5 */
+ [0x20] = 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,
+ /* USB Devs 18/19/20/22 INTA-C */
+ [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12,
+ /* SATA */
+ [0x41] = 0x13
+};
+
+/*
+ * This table defines the index into the picr/intr_data
+ * tables for each device. Any enabled device and slot
+ * that uses hardware interrupts should have an entry
+ * in this table to define its index into the FCH
+ * PCI_INTR register 0xC00/0xC01. This index will define
+ * the interrupt that it should use. Putting PIRQ_A into
+ * the PIN A index for a device will tell that device to
+ * use PIC IRQ 10 if it uses PIN A for its hardware INT.
+ */
+static const struct pirq_struct mainboard_pirq_data[] = {
+ /* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */
+ {GFX_DEVFN, {PIRQ_A, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */
+ {ACTL_DEVFN,{PIRQ_NC, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* Audio: 01.1 */
+ {NB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* x4 PCIe: 02.1 */
+ {NB_PCIE_PORT2_DEVFN, {PIRQ_B, PIRQ_C, PIRQ_D, PIRQ_A}}, /* mPCIe: 02.2 */
+ {NB_PCIE_PORT3_DEVFN, {PIRQ_C, PIRQ_D, PIRQ_A, PIRQ_B}}, /* NIC: 02.3 */
+ {NB_PCIE_PORT4_DEVFN, {PIRQ_D, PIRQ_A, PIRQ_B, PIRQ_C}}, /* Edge: 02.4 */
+ {NB_PCIE_PORT5_DEVFN, {PIRQ_E, PIRQ_F, PIRQ_G, PIRQ_H}}, /* Edge: 02.5 */
+ {XHCI_DEVFN, {PIRQ_C, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* XHCI: 10.0 */
+ {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */
+ {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */
+ {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */
+ {OHCI2_DEVFN, {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2: 13.0 */
+ {EHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2: 13.2 */
+ {SMBUS_DEVFN, {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS: 14.0 */
+ {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */
+ {SD_DEVFN, {PIRQ_SD, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SD: 14.7 */
+};
+
+const u8 *picr_data = mainboard_picr_data;
+const u8 *intr_data = mainboard_intr_data;
+
+/* PIRQ Setup */
+static void pirq_setup(void)
+{
+ pirq_data_ptr = mainboard_pirq_data;
+ pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct);
+ intr_data_ptr = mainboard_intr_data;
+ picr_data_ptr = mainboard_picr_data;
+}
+
+/**********************************************
+ * enable the dedicated function in mainboard.
+ **********************************************/
+static void mainboard_enable(device_t dev)
+{
+ printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+
+ if (acpi_is_wakeup_s3())
+ agesawrapper_fchs3earlyrestore();
+
+ /* Initialize the PIRQ data structures for consumption */
+ pirq_setup();
+}
+
+struct chip_operations mainboard_ops = {
+ .enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/bap/ode_e20XX/mptable.c b/src/mainboard/bap/ode_e20XX/mptable.c
new file mode 100644
index 0000000..5ead389
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/mptable.c
@@ -0,0 +1,169 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <arch/ioapic.h>
+#include <string.h>
+#include <stdint.h>
+#include <cpu/amd/amdfam16.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <southbridge/amd/common/amd_pci_util.h>
+#include <drivers/generic/ioapic/chip.h>
+
+static void *smp_write_config_table(void *v)
+{
+ struct mp_config_table *mc;
+ int bus_isa;
+
+ /*
+ * By the time this function gets called, the IOAPIC registers
+ * have been written so they can be read to get the correct
+ * APIC ID and Version
+ */
+ u8 ioapic_id = (io_apic_read(VIO_APIC_VADDR, 0x00) >> 24);
+ u8 ioapic_ver = (io_apic_read(VIO_APIC_VADDR, 0x01) & 0xFF);
+
+ /* Intialize the MP_Table */
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+
+ mptable_init(mc, LOCAL_APIC_ADDR);
+
+ /*
+ * Type 0: Processor Entries:
+ * LAPIC ID, LAPIC Version, CPU Flags:EN/BP,
+ * CPU Signature (Stepping, Model, Family),
+ * Feature Flags
+ */
+ smp_write_processors(mc);
+
+ /*
+ * Type 1: Bus Entries:
+ * Bus ID, Bus Type
+ */
+ mptable_write_buses(mc, NULL, &bus_isa);
+
+ /*
+ * Type 2: I/O APICs:
+ * APIC ID, Version, APIC Flags:EN, Address
+ */
+ smp_write_ioapic(mc, ioapic_id, ioapic_ver, VIO_APIC_VADDR);
+
+ /*
+ * Type 3: I/O Interrupt Table Entries:
+ * Int Type, Int Polarity, Int Level, Source Bus ID,
+ * Source Bus IRQ, Dest APIC ID, Dest PIN#
+ */
+ mptable_add_isa_interrupts(mc, bus_isa, ioapic_id, 0);
+
+ /* PCI interrupts are level triggered, and are
+ * associated with a specific bus/device/function tuple.
+ */
+#define PCI_INT(bus, dev, fn, pin) \
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), ioapic_id, (pin))
+
+ /* APU Internal Graphic Device */
+ PCI_INT(0x0, 0x01, 0x0, intr_data_ptr[PIRQ_C]);
+ PCI_INT(0x0, 0x01, 0x1, intr_data_ptr[PIRQ_D]);
+
+ /* SMBUS / ACPI */
+ PCI_INT(0x0, 0x14, 0x0, intr_data_ptr[PIRQ_SMBUS]);
+
+ /* Southbridge HD Audio */
+ PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[PIRQ_HDA]);
+
+ /* LPC */
+ PCI_INT(0x0, 0x14, 0x3, intr_data_ptr[PIRQ_C]);
+
+ /* USB */
+ PCI_INT(0x0, 0x12, 0x0, intr_data_ptr[PIRQ_OHCI1]);
+ PCI_INT(0x0, 0x12, 0x2, intr_data_ptr[PIRQ_EHCI1]);
+ PCI_INT(0x0, 0x13, 0x0, intr_data_ptr[PIRQ_OHCI2]);
+ PCI_INT(0x0, 0x13, 0x2, intr_data_ptr[PIRQ_EHCI2]);
+ PCI_INT(0x0, 0x16, 0x0, intr_data_ptr[PIRQ_OHCI3]);
+ PCI_INT(0x0, 0x16, 0x2, intr_data_ptr[PIRQ_EHCI3]);
+ PCI_INT(0x0, 0x14, 0x2, intr_data_ptr[PIRQ_OHCI4]);
+
+ /* SATA */
+ PCI_INT(0x0, 0x11, 0x0, intr_data_ptr[PIRQ_SATA]);
+
+ /* on board NIC & Slot PCIE */
+ PCI_INT(0x1, 0x0, 0x0, intr_data_ptr[PIRQ_E]);
+ PCI_INT(0x2, 0x0, 0x0, intr_data_ptr[PIRQ_F]);
+
+ /* PCI slots */
+ device_t dev = dev_find_slot(0, PCI_DEVFN(0x14, 4));
+ if (dev && dev->enabled) {
+ u8 bus_pci = dev->link_list->secondary;
+ /* PCI_SLOT 0 */
+ PCI_INT(bus_pci, 0x5, 0x0, intr_data_ptr[PIRQ_E]);
+ PCI_INT(bus_pci, 0x5, 0x1, intr_data_ptr[PIRQ_F]);
+ PCI_INT(bus_pci, 0x5, 0x2, intr_data_ptr[PIRQ_G]);
+ PCI_INT(bus_pci, 0x5, 0x3, intr_data_ptr[PIRQ_H]);
+
+ /* PCI_SLOT 1 */
+ PCI_INT(bus_pci, 0x6, 0x0, intr_data_ptr[PIRQ_F]);
+ PCI_INT(bus_pci, 0x6, 0x1, intr_data_ptr[PIRQ_G]);
+ PCI_INT(bus_pci, 0x6, 0x2, intr_data_ptr[PIRQ_H]);
+ PCI_INT(bus_pci, 0x6, 0x3, intr_data_ptr[PIRQ_E]);
+
+ /* PCI_SLOT 2 */
+ PCI_INT(bus_pci, 0x7, 0x0, intr_data_ptr[PIRQ_G]);
+ PCI_INT(bus_pci, 0x7, 0x1, intr_data_ptr[PIRQ_H]);
+ PCI_INT(bus_pci, 0x7, 0x2, intr_data_ptr[PIRQ_E]);
+ PCI_INT(bus_pci, 0x7, 0x3, intr_data_ptr[PIRQ_F]);
+
+ PCI_INT(bus_pci, 0x0, 0x0, intr_data_ptr[PIRQ_C]);
+ PCI_INT(bus_pci, 0x0, 0x1, intr_data_ptr[PIRQ_D]);
+ PCI_INT(bus_pci, 0x0, 0x2, intr_data_ptr[PIRQ_E]);
+ }
+
+ /* PCIe Lan*/
+ PCI_INT(0x0, 0x06, 0x0, intr_data_ptr[PIRQ_D]);
+
+ /* FCH PCIe PortA */
+ PCI_INT(0x0, 0x15, 0x0, intr_data_ptr[PIRQ_A]);
+ /* FCH PCIe PortB */
+ PCI_INT(0x0, 0x15, 0x1, intr_data_ptr[PIRQ_B]);
+ /* FCH PCIe PortC */
+ PCI_INT(0x0, 0x15, 0x2, intr_data_ptr[PIRQ_C]);
+ /* FCH PCIe PortD */
+ PCI_INT(0x0, 0x15, 0x3, intr_data_ptr[PIRQ_D]);
+
+ /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+ smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+
+ IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
+ IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ return mptable_finalize(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr, 0);
+ return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/bap/ode_e20XX/romstage.c b/src/mainboard/bap/ode_e20XX/romstage.c
new file mode 100644
index 0000000..be065b2
--- /dev/null
+++ b/src/mainboard/bap/ode_e20XX/romstage.c
@@ -0,0 +1,120 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2015 BAP - Bruhnspace Advanced Projects
+ * (Written by Fabian Kunkel <fabi at adv.bruhnspace.com> for BAP)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <arch/stages.h>
+#include <device/pnp_def.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <console/console.h>
+#include <console/loglevel.h>
+#include <cpu/amd/car.h>
+#include <northbridge/amd/agesa/agesawrapper.h>
+#include <cpu/x86/bist.h>
+#include <cpu/x86/lapic.h>
+#include <southbridge/amd/agesa/hudson/hudson.h>
+#include <cpu/amd/agesa/s3_resume.h>
+#include <superio/fintek/common/fintek.h>
+#include <superio/fintek/f81866d/f81866d.h>
+#include "cbmem.h"
+
+#define SERIAL_DEV1 PNP_DEV(0x4e, F81866D_SP1)
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ u32 val;
+
+ // All cores: set pstate 7 (800 MHz) early to save power
+ __writemsr (0xc0010062, 7);
+
+ amd_initmmio();
+
+ /* Set LPC decode enables. */
+ pci_devfn_t dev = PCI_DEV(0, 0x14, 3);
+ pci_write_config32(dev, 0x44, 0xff03ffd5);
+
+ hudson_lpc_port80();
+
+ if (!cpu_init_detectedx && boot_cpu()) {
+ post_code(0x30);
+
+ post_code(0x31);
+ fintek_enable_serial(SERIAL_DEV1, CONFIG_TTYS0_BASE);
+ console_init();
+ }
+
+ /* Halt if there was a built in self test failure */
+ post_code(0x34);
+ report_bist_failure(bist);
+
+ /* Load MPB */
+ val = cpuid_eax(1);
+ printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
+ printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx);
+
+ /* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */
+ int i;
+ for(i = 0; i < 200000; i++)
+ val = inb(0xcd6);
+
+ post_code(0x37);
+ agesawrapper_amdinitreset();
+ post_code(0x38);
+ printk(BIOS_DEBUG, "Got past yangtze_early_setup\n");
+
+ post_code(0x39);
+
+ agesawrapper_amdinitearly();
+ int s3resume = acpi_is_wakeup_s3();
+ if (!s3resume) {
+ post_code(0x40);
+ agesawrapper_amdinitpost();
+ post_code(0x41);
+ agesawrapper_amdinitenv();
+ /* TODO: Disable cache is not ok. */
+ disable_cache_as_ram();
+ } else { /* S3 detect */
+ printk(BIOS_INFO, "S3 detected\n");
+
+ post_code(0x60);
+ agesawrapper_amdinitresume();
+
+ amd_initcpuio();
+ agesawrapper_amds3laterestore();
+
+ post_code(0x61);
+ prepare_for_resume();
+ }
+
+ outb(0xEA, 0xCD6);
+ outb(0x1, 0xcd7);
+
+ post_code(0x50);
+ copy_and_run();
+
+ post_code(0x54); /* Should never see this post code. */
+}
More information about the coreboot-gerrit
mailing list