[coreboot-gerrit] New patch to review for coreboot: 7196257 drivers/pc80/i8254.c: Indent with GNU indent 2.2.11
Paul Menzel (paulepanter@users.sourceforge.net)
gerrit at coreboot.org
Sun Jun 7 11:14:18 CEST 2015
Paul Menzel (paulepanter at users.sourceforge.net) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/10452
-gerrit
commit 7196257dffe00bc26cfdfd1a7239cbc932740594
Author: Paul Menzel <paulepanter at users.sourceforge.net>
Date: Sun Jun 7 11:11:23 2015 +0200
drivers/pc80/i8254.c: Indent with GNU indent 2.2.11
Run `indent -linux src/drivers/pc80/i8254.c` and manually put the `;` in
the while loop back on a separate line.
Change-Id: I58c4c5df3846a91ef92aafb608962dc26a21f811
Signed-off-by: Paul Menzel <paulepanter at users.sourceforge.net>
---
src/drivers/pc80/i8254.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/src/drivers/pc80/i8254.c b/src/drivers/pc80/i8254.c
index 27a7b2b..70f71d9 100644
--- a/src/drivers/pc80/i8254.c
+++ b/src/drivers/pc80/i8254.c
@@ -26,30 +26,30 @@
void setup_i8254(void)
{
/* Timer 0 (taken from biosemu) */
- outb(TIMER0_SEL|WORD_ACCESS|MODE3|BINARY_COUNT, TIMER_MODE_PORT);
+ outb(TIMER0_SEL | WORD_ACCESS | MODE3 | BINARY_COUNT, TIMER_MODE_PORT);
outb(0x00, TIMER0_PORT);
outb(0x00, TIMER0_PORT);
/* Timer 1 */
- outb(TIMER1_SEL|LOBYTE_ACCESS|MODE3|BINARY_COUNT, TIMER_MODE_PORT);
+ outb(TIMER1_SEL | LOBYTE_ACCESS | MODE3 | BINARY_COUNT,
+ TIMER_MODE_PORT);
outb(0x12, TIMER1_PORT);
}
#if CONFIG_UDELAY_TIMER2
static void load_timer2(unsigned int ticks)
{
- /* Set up the timer gate, turn off the speaker */
- outb((inb(PPC_PORTB) & ~PPCB_SPKR) | PPCB_T2GATE, PPC_PORTB);
- outb(TIMER2_SEL|WORD_ACCESS|MODE0|BINARY_COUNT, TIMER_MODE_PORT);
- outb(ticks & 0xFF, TIMER2_PORT);
- outb(ticks >> 8, TIMER2_PORT);
+ /* Set up the timer gate, turn off the speaker */
+ outb((inb(PPC_PORTB) & ~PPCB_SPKR) | PPCB_T2GATE, PPC_PORTB);
+ outb(TIMER2_SEL | WORD_ACCESS | MODE0 | BINARY_COUNT, TIMER_MODE_PORT);
+ outb(ticks & 0xFF, TIMER2_PORT);
+ outb(ticks >> 8, TIMER2_PORT);
}
-
void udelay(int usecs)
{
- load_timer2((usecs*TICKS_PER_MS)/1000);
- while ((inb(PPC_PORTB) & PPCB_T2OUT) == 0)
- ;
+ load_timer2((usecs * TICKS_PER_MS) / 1000);
+ while ((inb(PPC_PORTB) & PPCB_T2OUT) == 0)
+ ;
}
#endif
More information about the coreboot-gerrit
mailing list