[coreboot-gerrit] Patch set updated for coreboot: 419ffcd AMD Lamar: Add a new AMD FP3 socket mainboard
Dave Frodin (dave.frodin@se-eng.com)
gerrit at coreboot.org
Wed Jan 21 19:25:18 CET 2015
Dave Frodin (dave.frodin at se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5968
-gerrit
commit 419ffcdb1fa82116a43735bdd910f27eed56ef6f
Author: Bruce Griffith <Bruce.Griffith at se-eng.com>
Date: Tue Jun 10 05:10:19 2014 -0600
AMD Lamar: Add a new AMD FP3 socket mainboard
Add a new mainboard based on AMD's Family 15 Model 30 processor.
The board will boot DOS, Ubuntu 14.10 and Windows 7.
Change-Id: I2f73c396247239d54f978846e8958950697d7464
Signed-off-by: Bruce Griffith <Bruce.Griffith at se-eng.com>
Signed-off-by: Dave Frodin <dave.frodin at se-eng.com>
---
src/mainboard/amd/Kconfig | 3 +
src/mainboard/amd/lamar/BiosCallOuts.c | 353 +++++++++++++++
src/mainboard/amd/lamar/Kconfig | 102 +++++
src/mainboard/amd/lamar/Makefile.inc | 26 ++
src/mainboard/amd/lamar/PlatformGnbPcie.c | 138 ++++++
src/mainboard/amd/lamar/acpi/AmdImc.asl | 115 +++++
src/mainboard/amd/lamar/acpi/gpe.asl | 77 ++++
src/mainboard/amd/lamar/acpi/mainboard.asl | 43 ++
src/mainboard/amd/lamar/acpi/routing.asl | 231 ++++++++++
src/mainboard/amd/lamar/acpi/sata.asl | 1 +
src/mainboard/amd/lamar/acpi/si.asl | 28 ++
src/mainboard/amd/lamar/acpi/sleep.asl | 103 +++++
src/mainboard/amd/lamar/acpi/superio.asl | 1 +
src/mainboard/amd/lamar/acpi/thermal.asl | 1 +
src/mainboard/amd/lamar/acpi/usb_oc.asl | 31 ++
src/mainboard/amd/lamar/acpi_tables.c | 59 +++
src/mainboard/amd/lamar/agesawrapper.c | 679 +++++++++++++++++++++++++++++
src/mainboard/amd/lamar/board_info.txt | 5 +
src/mainboard/amd/lamar/cmos.layout | 114 +++++
src/mainboard/amd/lamar/devicetree.cb | 118 +++++
src/mainboard/amd/lamar/dsdt.asl | 91 ++++
src/mainboard/amd/lamar/get_bus_conf.c | 150 +++++++
src/mainboard/amd/lamar/irq_tables.c | 112 +++++
src/mainboard/amd/lamar/mainboard.c | 208 +++++++++
src/mainboard/amd/lamar/mptable.c | 170 ++++++++
src/mainboard/amd/lamar/romstage.c | 138 ++++++
26 files changed, 3097 insertions(+)
diff --git a/src/mainboard/amd/Kconfig b/src/mainboard/amd/Kconfig
index cc5679a..8ae8be7 100644
--- a/src/mainboard/amd/Kconfig
+++ b/src/mainboard/amd/Kconfig
@@ -41,6 +41,8 @@ config BOARD_AMD_PARMER
bool "Parmer"
config BOARD_AMD_THATCHER
bool "Thatcher"
+config BOARD_AMD_LAMAR
+ bool "Lamar"
config BOARD_AMD_OLIVEHILL
bool "Olive Hill"
config BOARD_AMD_OLIVEHILLPLUS
@@ -66,6 +68,7 @@ source "src/mainboard/amd/torpedo/Kconfig"
source "src/mainboard/amd/union_station/Kconfig"
source "src/mainboard/amd/parmer/Kconfig"
source "src/mainboard/amd/thatcher/Kconfig"
+source "src/mainboard/amd/lamar/Kconfig"
source "src/mainboard/amd/olivehill/Kconfig"
source "src/mainboard/amd/olivehillplus/Kconfig"
diff --git a/src/mainboard/amd/lamar/BiosCallOuts.c b/src/mainboard/amd/lamar/BiosCallOuts.c
new file mode 100644
index 0000000..f9d76ee
--- /dev/null
+++ b/src/mainboard/amd/lamar/BiosCallOuts.c
@@ -0,0 +1,353 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include <northbridge/amd/pi/BiosCallOuts.h>
+#include "Ids.h"
+#include "OptionsIds.h"
+#include "heapManager.h"
+#include "FchPlatform.h"
+#include "cbfs.h"
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+#include "imc.h"
+#endif
+#include "hudson.h"
+#include <stdlib.h>
+#include <device/azalia.h>
+
+static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr);
+
+const BIOS_CALLOUT_STRUCT BiosCallouts[] =
+{
+ {AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer },
+ {AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer },
+ {AGESA_LOCATE_BUFFER, agesa_LocateBuffer },
+ {AGESA_READ_SPD, agesa_ReadSpd },
+ {AGESA_DO_RESET, agesa_Reset },
+ {AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
+ {AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
+ {AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData },
+ {AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
+ {AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
+ {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config },
+ {AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage }
+};
+const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
+
+/**
+ * Realtek ALC272 CODEC Verb Table
+ */
+static const CODEC_ENTRY Alc272_VerbTbl[] = {
+ { 0x11, 0x411111F0 }, /* - S/PDIF Output 2 */
+ { 0x12, 0x411111F0 }, /* - Digital Mic 1/2 [GPIO0] */
+ { 0x13, 0x411111F0 }, /* - Digital Mic 3/4 [GPIO1] */
+ { 0x14, 0x411111F0 }, /* Port D - Front Panel headphone */
+ { 0x15, 0x411111F0 }, /* Port A - Surround */
+ { 0x17, 0x411111F0 }, /* Port H - Mono */
+ { 0x18, /* Port B - MIC - pink jack */
+ (AZALIA_PINCFG_PORT_JACK << 30)
+ | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24)
+ | (AZALIA_PINCFG_DEVICE_MICROPHONE << 20)
+ | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16)
+ | (AZALIA_PINCFG_COLOR_PINK << 12)
+ | (4 << 4)
+ | (0 << 0)
+ },
+ { 0x19, 0x411111F0 }, /* Port F - Front Panel Mic */
+ { 0x1A, /* Port C - LineIn1 - blue jack */
+ (AZALIA_PINCFG_PORT_JACK << 30)
+ | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24)
+ | (AZALIA_PINCFG_DEVICE_LINEIN << 20)
+ | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16)
+ | (AZALIA_PINCFG_COLOR_BLUE << 12)
+ | (4 << 4)
+ | (0xF << 0)
+ },
+ { 0x1B, 0x411111F0 }, /* Port E - Front Panel line-out */
+ { 0x1D, 0x40251E05 }, /* PC Beep - (internal) */
+ { 0x1E, /* S/PDIF - Internal Header */
+ (AZALIA_PINCFG_PORT_JACK << 30)
+ | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_FRONT) << 24)
+ | (AZALIA_PINCFG_DEVICE_SPDIF_OUT << 20)
+ | (AZALIA_PINCFG_CONN_RCA << 16)
+ | (AZALIA_PINCFG_COLOR_BLACK << 12)
+ | (1 << 4)
+ | (0 << 0)
+ },
+ { 0x21, /* Port I - HPout - green jack */
+ (AZALIA_PINCFG_PORT_JACK << 30)
+ | ((AZALIA_PINCFG_LOCATION_EXTERNAL | AZALIA_PINCFG_LOCATION_REAR) << 24)
+ | (AZALIA_PINCFG_DEVICE_HP_OUT << 20)
+ | (AZALIA_PINCFG_CONN_MINI_HEADPHONE_JACK << 16)
+ | (AZALIA_PINCFG_COLOR_GREEN << 12)
+ | (4 << 4)
+ | (0 << 0)
+ },
+ { 0xFF, 0xFFFFFFFF },
+};
+
+static const CODEC_TBL_LIST CodecTableList[] =
+{
+ {0x10ec0272, (CODEC_ENTRY*)&Alc272_VerbTbl[0]},
+ {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
+};
+
+#define FAN_INPUT_INTERNAL_DIODE 0
+#define FAN_INPUT_TEMP0 1
+#define FAN_INPUT_TEMP1 2
+#define FAN_INPUT_TEMP2 3
+#define FAN_INPUT_TEMP3 4
+#define FAN_INPUT_TEMP0_FILTER 5
+#define FAN_INPUT_ZERO 6
+#define FAN_INPUT_DISABLED 7
+
+#define FAN_AUTOMODE (1 << 0)
+#define FAN_LINEARMODE (1 << 1)
+#define FAN_STEPMODE ~(1 << 1)
+#define FAN_POLARITY_HIGH (1 << 2)
+#define FAN_POLARITY_LOW ~(1 << 2)
+
+/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
+#define FREQ_28KHZ 0x0
+#define FREQ_25KHZ 0x1
+#define FREQ_23KHZ 0x2
+#define FREQ_21KHZ 0x3
+#define FREQ_29KHZ 0x4
+#define FREQ_18KHZ 0x5
+#define FREQ_100HZ 0xF7
+#define FREQ_87HZ 0xF8
+#define FREQ_58HZ 0xF9
+#define FREQ_44HZ 0xFA
+#define FREQ_35HZ 0xFB
+#define FREQ_29HZ 0xFC
+#define FREQ_22HZ 0xFD
+#define FREQ_14HZ 0xFE
+#define FREQ_11HZ 0xFF
+
+/*
+ * Hardware Monitor Fan Control
+ * Hardware limitation:
+ * HWM will fail to read the input temperature via I2C if other
+ * software switches the I2C address. AMD recommends using IMC
+ * to control fans, instead of HWM.
+ */
+static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
+{
+ FCH_HWM_FAN_CTR oem_factl[5] = {
+ /*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
+ /* FanOUT0 Fan header J32 */
+ {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
+ /* FanOUT1 Fan header J31*/
+ {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
+ {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
+ {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
+ {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
+ };
+ LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
+
+ /* Enable IMC fan control. the recommended way */
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+
+ imc_reg_init();
+
+ /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */
+
+ FchParams->Imc.ImcEnable = TRUE;
+ FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
+ FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
+
+ LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+
+ /* Thermal Zone Parameter */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e; //6 | BIT3;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
+
+ /* IMC Fan Policy temperature thresholds */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
+
+ /* IMC Fan Policy PWM Settings */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
+
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
+
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
+
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
+
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
+
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
+
+ /* IMC Function */
+ FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;//BIT0 | BIT4 |BIT8;
+
+ /* NOTE:
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
+ * AGESA put EcDefaultMessage as global data in ROM, so we can't override it.
+ * so we remove it from AGESA code. Please See FchInitLateHwm.
+ */
+
+#else /* HWM fan control, using the alternative method */
+ FchParams->Imc.ImcEnable = FALSE;
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
+
+#endif /* CONFIG_HUDSON_IMC_FWM */
+}
+
+/**
+ * Fch Oem setting callback
+ *
+ * Configure platform specific Hudson device,
+ * such Azalia, SATA, IMC etc.
+ */
+static AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
+{
+ AMD_CONFIG_PARAMS *StdHeader = (AMD_CONFIG_PARAMS *)ConfigPtr;
+ if (StdHeader->Func == AMD_INIT_RESET) {
+ FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *) FchData;
+ printk(BIOS_DEBUG, "\nFch OEM config in INIT RESET\n");
+ //FchParams->EcChannel0 = TRUE; /* logical devicd 3 */
+#if CONFIG_HUDSON_LEGACY_FREE
+ FchParams->LegacyFree = 1;
+#endif
+
+ /* Turn on FCH GPP slots */
+ FchParams->FchReset.GppEnable = TRUE;
+ FchParams->Gpp.GppFunctionEnable = TRUE;
+ FchParams->Gpp.GppLinkConfig = PortA1B1C1D1;
+ FchParams->Gpp.PortCfg[0].PortPresent = TRUE;
+ FchParams->Gpp.PortCfg[1].PortPresent = TRUE;
+ FchParams->Gpp.PortCfg[2].PortPresent = TRUE;
+ FchParams->Gpp.PortCfg[3].PortPresent = TRUE;
+
+#if CONFIG_HUDSON_SATA_IDE || CONFIG_HUDSON_SATA_AHCI
+ FchParams->FchReset.SataEnable = TRUE;
+#else
+ FchParams->FchReset.SataEnable = FALSE;
+#endif
+#if CONFIG_HUDSON_SATA_IDE || CONFIG_HUDSON_SATA_LEGACY_IDE
+ FchParams->FchReset.IdeEnable = TRUE;
+#else
+ FchParams->FchReset.IdeEnable = FALSE;
+#endif
+ } else if (StdHeader->Func == AMD_INIT_ENV) {
+ FCH_DATA_BLOCK *FchParams = (FCH_DATA_BLOCK *)FchData;
+ printk(BIOS_DEBUG, "Fch OEM config in INIT ENV");
+
+ /* Turn on FCH GPP slots */
+ FchParams->Gpp.GppFunctionEnable = TRUE;
+ FchParams->Gpp.GppLinkConfig = PortA1B1C1D1;
+
+ /* Azalia Controller OEM Codec Table Pointer */
+ FchParams->Azalia.AzaliaPinCfg = TRUE;
+ FchParams->Azalia.AzaliaConfig = (const AZALIA_PIN){
+ .AzaliaSdin0 = (CONFIG_AZ_PIN>>0) & 0x03,
+ .AzaliaSdin1 = (CONFIG_AZ_PIN>>2) & 0x03,
+ .AzaliaSdin2 = (CONFIG_AZ_PIN>>4) & 0x03,
+ .AzaliaSdin3 = (CONFIG_AZ_PIN>>6) & 0x03
+ };
+ FchParams->Azalia.AzaliaOemCodecTablePtr = CodecTableList;
+ /* Azalia Controller Front Panel OEM Table Pointer */
+
+ /* Fan Control */
+ oem_fan_control(FchParams);
+ }
+ printk(BIOS_DEBUG, " Done\n");
+
+ return AGESA_SUCCESS;
+}
diff --git a/src/mainboard/amd/lamar/Kconfig b/src/mainboard/amd/lamar/Kconfig
new file mode 100644
index 0000000..4226e62
--- /dev/null
+++ b/src/mainboard/amd/lamar/Kconfig
@@ -0,0 +1,102 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+if BOARD_AMD_LAMAR
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select CPU_AMD_PI_00630F01
+ select NORTHBRIDGE_AMD_PI_00630F01
+ select SOUTHBRIDGE_AMD_PI_BOLTON
+ select SUPERIO_FINTEK_F81216H
+ select HAVE_OPTION_TABLE
+ select HAVE_PIRQ_TABLE
+ select HAVE_MP_TABLE
+# select HAVE_ACPI_RESUME
+ select HAVE_ACPI_TABLES
+ select BOARD_ROMSIZE_KB_8192
+ select GFXUMA
+
+config MAINBOARD_DIR
+ string
+ default amd/lamar
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "DB-FP3"
+
+config MAINBOARD_SERIAL_NUMBER
+ string
+ default "52198A"
+
+config HW_MEM_HOLE_SIZEK
+ hex
+ default 0x200000
+
+config MAX_CPUS
+ int
+ default 4
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+ bool
+ default n
+
+config IRQ_SLOT_COUNT
+ int
+ default 11
+
+config RAMTOP
+ hex
+ default 0x1000000
+
+config HEAP_SIZE
+ hex
+ default 0xc0000
+
+
+config RAMBASE
+ hex
+ default 0x200000
+
+config ONBOARD_VGA_IS_PRIMARY
+ bool
+ default y
+
+config HUDSON_XHCI_FWM_FILE
+ string
+ default "3rdparty/southbridge/amd/bolton/xhci.bin"
+
+config AZ_PIN
+ hex
+ default 0x02
+
+config ENABLE_DP3_DAUGHTER_CARD_IN_J120
+ bool "Use J120 as an additional graphics port"
+ default n
+ help
+ The PCI Express slot at J120 can be configured as an additional
+ DisplayPort connector using an adapter card from AMD or as a normal
+ PCI Express (x4) slot.
+
+ By default, the connector is configured as a PCI Express (x4) slot.
+
+ Select this option to enable the slot for use with one of AMD's
+ passive graphics port expander cards (only available from AMD).
+
+endif # BOARD_AMD_LAMAR
diff --git a/src/mainboard/amd/lamar/Makefile.inc b/src/mainboard/amd/lamar/Makefile.inc
new file mode 100644
index 0000000..ec584cb
--- /dev/null
+++ b/src/mainboard/amd/lamar/Makefile.inc
@@ -0,0 +1,26 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+romstage-y += agesawrapper.c
+romstage-y += BiosCallOuts.c
+romstage-y += PlatformGnbPcie.c
+
+ramstage-y += agesawrapper.c
+ramstage-y += BiosCallOuts.c
+ramstage-y += PlatformGnbPcie.c
diff --git a/src/mainboard/amd/lamar/PlatformGnbPcie.c b/src/mainboard/amd/lamar/PlatformGnbPcie.c
new file mode 100644
index 0000000..0d65ad5
--- /dev/null
+++ b/src/mainboard/amd/lamar/PlatformGnbPcie.c
@@ -0,0 +1,138 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <northbridge/amd/pi/agesawrapper.h>
+
+#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE
+
+const PCIe_PORT_DESCRIPTOR PortList [] = {
+
+ /*
+ * Lanes to pins to PCI device mapping can be found in section 2.12 of the
+ * BIOS and Kernel Developer's Guide for AMD Family 15h Models 30h-3Fh
+ */
+
+ { /* PCIe x16 Connector J119, DP4/5/6, GFX[15:0], Lanes [31:16], PCI 00:02.1 */
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 16, 31),
+ PCIE_PORT_DATA_INITIALIZER_V2 (
+ PortEnabled,
+ ChannelTypeExt6db, 0, 0,
+ HotplugDisabled,
+ PcieGenMaxSupported,
+ PcieGenMaxSupported,
+ AspmDisabled,
+ 175,
+ 0
+ )
+ },
+
+ { /* PCIe x4 Connector J118, GPP[3:0], Lanes [11:8], PCI 00:03.2 */
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 8, 11),
+ PCIE_PORT_DATA_INITIALIZER_V2 (
+ PortEnabled,
+ ChannelTypeExt6db, 0, 0,
+ HotplugDisabled,
+ PcieGenMaxSupported,
+ PcieGenMaxSupported,
+ AspmDisabled,
+ 176,
+ 0
+ )
+ },
+
+ { /* PCIe x4 Connector J120, GPP[7:4], Lanes [15:12] */
+ DESCRIPTOR_TERMINATE_LIST,
+ PCIE_ENGINE_DATA_INITIALIZER (
+ IS_ENABLED(CONFIG_ENABLE_DP3_DAUGHTER_CARD_IN_J120) ? PcieUnusedEngine : PciePortEngine,
+ 12, 15
+ ),
+ PCIE_PORT_DATA_INITIALIZER_V2 (
+ PortEnabled,
+ ChannelTypeExt6db, 0, 0,
+ HotplugDisabled,
+ PcieGenMaxSupported, PcieGenMaxSupported,
+ AspmDisabled,
+ 177,
+ 0
+ )
+ },
+
+};
+
+static const PCIe_DDI_DESCRIPTOR DdiList [] = {
+ { /* DP3 */
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (
+ IS_ENABLED(CONFIG_ENABLE_DP3_DAUGHTER_CARD_IN_J120) ? PcieDdiEngine : PcieUnusedEngine,
+ 12, 15
+ ),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux4, Hdp4)
+ },
+
+ { /* DP2 */
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 36, 39),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux3, Hdp3)
+ },
+
+ { /* DP1 */
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 32, 35),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2)
+ },
+
+ { /* DP0 */
+ DESCRIPTOR_TERMINATE_LIST,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 4, 7),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1)
+ },
+};
+
+const PCIe_COMPLEX_DESCRIPTOR PcieComplex = {
+ .Flags = DESCRIPTOR_TERMINATE_LIST,
+ .SocketId = 0,
+ .PciePortList = PortList,
+ .DdiLinkList = DdiList
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * OemCustomizeInitEarly
+ *
+ * Description:
+ * This stub function will call the host environment through the binary block
+ * interface (call-out port) to provide a user hook opportunity
+ *
+ * Parameters:
+ * @param[in] *InitEarly
+ *
+ * @retval VOID
+ *
+ **/
+/*---------------------------------------------------------------------------------------*/
+VOID
+OemCustomizeInitEarly (
+ IN OUT AMD_EARLY_PARAMS *InitEarly
+ )
+{
+ InitEarly->GnbConfig.PcieComplexList = &PcieComplex;
+}
diff --git a/src/mainboard/amd/lamar/acpi/AmdImc.asl b/src/mainboard/amd/lamar/acpi/AmdImc.asl
new file mode 100644
index 0000000..81dfb46
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/AmdImc.asl
@@ -0,0 +1,115 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+OperationRegion(IMIO, SystemIO, 0x3E, 0x02)
+Field(IMIO , ByteAcc, NoLock, Preserve) {
+ IMCX,8,
+ IMCA,8
+}
+
+IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) {
+ Offset(0x80),
+ MSTI, 8,
+ MITS, 8,
+ MRG0, 8,
+ MRG1, 8,
+ MRG2, 8,
+ MRG3, 8,
+}
+
+Method(WACK, 0)
+{
+ Store(0, Local0)
+ Store(50, Local1)
+ While (LAnd (LNotEqual(Local0, 0xFA), LGreater(Local1,0))) {
+ Store(MRG0, Local0)
+ Sleep(10)
+ Decrement(Local1)
+ }
+}
+
+//Init
+Method (ITZE, 0)
+{
+ Store(0, MRG0)
+ Store(0xB5, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(0, MRG2)
+ Store(0x80, MSTI)
+ WACK()
+
+ Or(MRG2, 0x01, Local0)
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(Local0, MRG2)
+ Store(0x81, MSTI)
+ WACK()
+}
+
+//Sleep
+Method (IMSP, 0)
+{
+ Store(0, MRG0)
+ Store(0xB5, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(1, MRG1)
+ Store(0, MRG2)
+ Store(0x98, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(0xB4, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+}
+
+//Wake
+Method (IMWK, 0)
+{
+ Store(0, MRG0)
+ Store(0xB5, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(0, MRG2)
+ Store(0x80, MSTI)
+ WACK()
+
+ Or(MRG2, 0x01, Local0)
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(Local0, MRG2)
+ Store(0x81, MSTI)
+ WACK()
+}
diff --git a/src/mainboard/amd/lamar/acpi/gpe.asl b/src/mainboard/amd/lamar/acpi/gpe.asl
new file mode 100644
index 0000000..3ea1764
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/gpe.asl
@@ -0,0 +1,77 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+Scope(\_GPE) { /* Start Scope GPE */
+
+ /* General event 3 */
+ Method(_L03) {
+ /* DBGO("\\_GPE\\_L00\n") */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* Legacy PM event */
+ Method(_L08) {
+ /* DBGO("\\_GPE\\_L08\n") */
+ }
+
+ /* Temp warning (TWarn) event */
+ Method(_L09) {
+ /* DBGO("\\_GPE\\_L09\n") */
+ /* Notify (\_TZ.TZ00, 0x80) */
+ }
+
+ /* USB controller PME# */
+ Method(_L0B) {
+ /* DBGO("\\_GPE\\_L0B\n") */
+ Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* ExtEvent0 SCI event */
+ Method(_L10) {
+ /* DBGO("\\_GPE\\_L10\n") */
+ }
+
+
+ /* ExtEvent1 SCI event */
+ Method(_L11) {
+ /* DBGO("\\_GPE\\_L11\n") */
+ }
+
+ /* GPIO0 or GEvent8 event */
+ Method(_L18) {
+ /* DBGO("\\_GPE\\_L18\n") */
+ Notify(\_SB.PCI0.PBR2, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.PBR3, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* Azalia SCI event */
+ Method(_L1B) {
+ /* DBGO("\\_GPE\\_L1B\n") */
+ Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+} /* End Scope GPE */
diff --git a/src/mainboard/amd/lamar/acpi/mainboard.asl b/src/mainboard/amd/lamar/acpi/mainboard.asl
new file mode 100644
index 0000000..33be113
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/mainboard.asl
@@ -0,0 +1,43 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+ /* Data to be patched by the BIOS during POST */
+ /* FIXME the patching is not done yet! */
+ /* Memory related values */
+ Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
+ Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+ Name(PBLN, 0x0) /* Length of BIOS area */
+
+ Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */
+ Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */
+ Name(HPBA, 0xFED00000) /* Base address of HPET table */
+
+ Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+ /* Some global data */
+ Name(OSVR, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+ Name(OSV, Ones) /* Assume nothing */
+ Name(PMOD, One) /* Assume APIC */
+
+ /* AcpiGpe0Blk */
+ OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04)
+ Field(GP0B, ByteAcc, NoLock, Preserve) {
+ , 11,
+ USBS, 1,
+ }
diff --git a/src/mainboard/amd/lamar/acpi/routing.asl b/src/mainboard/amd/lamar/acpi/routing.asl
new file mode 100644
index 0000000..6b2bae6
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/routing.asl
@@ -0,0 +1,231 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+ /* Routing is in System Bus scope */
+ Name(PR0, Package(){
+ /* NB devices */
+ /* Bus 0, Dev 0 - F15 Host Controller */
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+ Package(){0x0001FFFF, 0, 0x0C, 0 },
+ Package(){0x0001FFFF, 1, INTH, 0 },
+ Package(){0x0001FFFF, 2, INTG, 0 },
+ Package(){0x0001FFFF, 3, INTF, 0 },
+
+ /* Bus 0, Dev 2 - NB PCIe Gfx Bridge */
+ Package(){0x0002FFFF, 0, INTE, 0 },
+ Package(){0x0002FFFF, 1, INTF, 0 },
+ Package(){0x0002FFFF, 2, INTG, 0 },
+ Package(){0x0002FFFF, 3, INTH, 0 },
+
+ /* Bus 0, Dev 3 - NB GPP PCIe bridge */
+ Package(){0x0003FFFF, 0, INTE, 0 },
+ Package(){0x0003FFFF, 1, INTF, 0 },
+ Package(){0x0003FFFF, 2, INTG, 0 },
+ Package(){0x0003FFFF, 3, INTH, 0 },
+
+ /* Bus 0, Dev 4 - UMI Bridge */
+ Package(){0x0004FFFF, 0, INTE, 0 },
+ Package(){0x0004FFFF, 1, INTF, 0 },
+ Package(){0x0004FFFF, 2, INTG, 0 },
+ Package(){0x0004FFFF, 3, INTH, 0 },
+
+ /* SB devices */
+ /* Bus 0, Dev 16 - USB: xHCI @ func 0
+ * xHCI @ func 2 */
+ Package(){0x0010FFFF, 0, INTC, 0 },
+ Package(){0x0010FFFF, 1, INTC, 0 },
+
+ /* Bus 0, Dev 17 - SATA controller */
+ Package(){0x0011FFFF, 0, INTD, 0 },
+
+ /* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0
+ * EHCI @ func 2 */
+ Package(){0x0012FFFF, 0, INTC, 0 },
+ Package(){0x0012FFFF, 1, INTB, 0 },
+
+ Package(){0x0013FFFF, 0, INTC, 0 },
+ Package(){0x0013FFFF, 1, INTB, 0 },
+
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */
+ Package(){0x0014FFFF, 1, INTB, 0 }, /* IDE Controller */
+ Package(){0x0014FFFF, 0, INTA, 0 }, /* Azalia Audio Controller */
+ Package(){0x0014FFFF, 2, INTC, 0 }, /* USB #4 OHCI Controller */
+
+ Package(){0x0016FFFF, 0, INTC, 0 },
+ Package(){0x0016FFFF, 2, INTB, 0 },
+
+ /* Bus 0, Dev 21 SB GPP Pcie Bridge */
+ Package(){0x0015FFFF, 0, INTE, 0 },
+ Package(){0x0015FFFF, 1, INTF, 0 },
+ Package(){0x0015FFFF, 2, INTG, 0 },
+ Package(){0x0015FFFF, 3, INTH, 0 },
+ })
+
+ Name(APR0, Package(){
+ /* NB devices in APIC mode */
+ /* Bus 0, Dev 0 - F15 Host Controller */
+
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+ Package(){0x0001FFFF, 0, 0, 12 },
+ Package(){0x0001FFFF, 1, 0, 5 },
+
+ /* Bus 0, Dev 2 - PCIe Bridge for GFX slots */
+ Package(){0x0002FFFF, 0, 0, 20 },
+ Package(){0x0002FFFF, 1, 0, 21 },
+ Package(){0x0002FFFF, 2, 0, 22 },
+ Package(){0x0002FFFF, 3, 0, 23 },
+
+ /* Bus 0, Dev 3 - PCIe Bridge for NB GPP slots */
+ Package(){0x0003FFFF, 0, 0, 20 },
+ Package(){0x0003FFFF, 1, 0, 21 },
+ Package(){0x0003FFFF, 2, 0, 22 },
+ Package(){0x0003FFFF, 3, 0, 23 },
+
+ /* Bus 0, Dev 4 - UMI Bridge */
+
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
+ Package(){0x0014FFFF, 1, 0, 17 }, /* IDE Controller */
+ Package(){0x0014FFFF, 0, 0, 16 }, /* Azalia Audio Controller */
+ Package(){0x0014FFFF, 2, 0, 18 }, /* USB #4 OHCI Controller */
+
+ /* SB devices in APIC mode */
+ /* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0
+ * EHCI @ func 2 */
+ Package(){0x0012FFFF, 0, 0, 18 },
+ Package(){0x0012FFFF, 1, 0, 17 },
+
+ Package(){0x0013FFFF, 0, 0, 18 },
+ Package(){0x0013FFFF, 1, 0, 17 },
+
+ Package(){0x0016FFFF, 0, 0, 18 },
+ Package(){0x0016FFFF, 1, 0, 17 },
+
+ /* Bus 0, Dev 16 - USB: XHCI func 0, 1 */
+ Package(){0x0010FFFF, 0, 0, 18},
+ Package(){0x0010FFFF, 1, 0, 18},
+
+ /* Bus 0, Dev 17 - SATA controller */
+ Package(){0x0011FFFF, 0, 0, 19 },
+
+ /* Bus0, Dev 21 PCIE Bridge */
+ Package(){0x0015FFFF, 0, 0, 20 },
+ Package(){0x0015FFFF, 1, 0, 21 },
+ Package(){0x0015FFFF, 2, 0, 22 },
+ Package(){0x0015FFFF, 3, 0, 23 },
+ })
+
+ Name(PS2, Package(){
+ /* The external GFX - Hooked to NB Gfx PCIe slots */
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+ })
+ Name(APS2, Package(){
+ /* The external GFX - Hooked to NB Gfx PCIe slots */
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PS3, Package(){
+ /* PCIe slot - Hooked to NB GPP PCIe slots */
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+ })
+ Name(APS3, Package(){
+ /* PCIe slot - Hooked to NB GPP PCIe slots */
+ Package(){0x0000FFFF, 0, 0, 16 },
+ Package(){0x0000FFFF, 1, 0, 17 },
+ Package(){0x0000FFFF, 2, 0, 18 },
+ Package(){0x0000FFFF, 3, 0, 19 },
+ })
+
+ Name(PE0, Package(){
+ /* PCIe slot - Hooked to PCIe Bridge 0*/
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+ })
+ Name(APE0, Package(){
+ /* PCIe slot - Hooked to PCIe Bridge 0*/
+ Package(){0x0000FFFF, 0, 0, 16 },
+ Package(){0x0000FFFF, 1, 0, 17 },
+ Package(){0x0000FFFF, 2, 0, 18 },
+ Package(){0x0000FFFF, 3, 0, 19 },
+ })
+
+ Name(PE1, Package(){
+ /* PCIe slot - Hooked to PCIe Bridge 1*/
+ Package(){0x0000FFFF, 0, INTB, 0 },
+ Package(){0x0000FFFF, 1, INTC, 0 },
+ Package(){0x0000FFFF, 2, INTD, 0 },
+ Package(){0x0000FFFF, 3, INTA, 0 },
+ })
+ Name(APE1, Package(){
+ /* PCIe slot - Hooked to PCIe Bridge 1*/
+ Package(){0x0000FFFF, 0, 0, 17 },
+ Package(){0x0000FFFF, 1, 0, 18 },
+ Package(){0x0000FFFF, 2, 0, 19 },
+ Package(){0x0000FFFF, 3, 0, 16 },
+ })
+
+ Name(PE2, Package(){
+ /* PCIe slot - Hooked to PCIe Bridge 2*/
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+ })
+ Name(APE2, Package(){
+ /* PCIe slot - Hooked to PCIe Bridge 2*/
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PE3, Package(){
+ /* PCIe slot - Hooked to PCIe Bridge 3 */
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+ })
+ Name(APE3, Package(){
+ /* PCIe slot - Hooked to PCIe Bridge 3*/
+ Package(){0x0000FFFF, 0, 0, 19 },
+ Package(){0x0000FFFF, 1, 0, 16 },
+ Package(){0x0000FFFF, 2, 0, 17 },
+ Package(){0x0000FFFF, 3, 0, 18 },
+ })
+
+ /* SB PCI Bridge */
+ Name(PCIB, Package(){
+ /* PCI slots: slot 0 behind Dev14, Fun4. */
+ Package(){0x0005FFFF, 0, 0, 0x14 },
+ Package(){0x0005FFFF, 1, 0, 0x15 },
+ Package(){0x0005FFFF, 2, 0, 0x16 },
+ Package(){0x0005FFFF, 3, 0, 0x17 },
+ })
diff --git a/src/mainboard/amd/lamar/acpi/sata.asl b/src/mainboard/amd/lamar/acpi/sata.asl
new file mode 100644
index 0000000..f675323
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/sata.asl
@@ -0,0 +1 @@
+/* No SATA functionality */
diff --git a/src/mainboard/amd/lamar/acpi/si.asl b/src/mainboard/amd/lamar/acpi/si.asl
new file mode 100644
index 0000000..aa49616
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/si.asl
@@ -0,0 +1,28 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+ Scope(\_SI) {
+ Method(_SST, 1) {
+ /* DBGO("\\_SI\\_SST\n") */
+ /* DBGO(" New Indicator state: ") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+ }
+ } /* End Scope SI */
+
+
diff --git a/src/mainboard/amd/lamar/acpi/sleep.asl b/src/mainboard/amd/lamar/acpi/sleep.asl
new file mode 100644
index 0000000..fcce35e
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/sleep.asl
@@ -0,0 +1,103 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Wake status package */
+Name(WKST,Package(){Zero, Zero})
+
+/*
+* \_PTS - Prepare to Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2, etc
+*
+* Exit:
+* -none-
+*
+* The _PTS control method is executed at the beginning of the sleep process
+* for S1-S5. The sleeping value is passed to the _PTS control method. This
+* control method may be executed a relatively long time before entering the
+* sleep state and the OS may abort the operation without notification to
+* the ACPI driver. This method cannot modify the configuration or power
+* state of any device in the system.
+*/
+Method(\_PTS, 1) {
+ /* DBGO("\\_PTS\n") */
+ /* DBGO("From S0 to S") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+
+ /* Clear sleep SMI status flag and enable sleep SMI trap. */
+ /*Store(One, CSSM)
+ Store(One, SSEN)*/
+
+ /* On older chips, clear PciExpWakeDisEn */
+ /*if (LLessEqual(\_SB.SBRI, 0x13)) {
+ * Store(0,\_SB.PWDE)
+ *}
+ */
+
+ /* Clear wake status structure. */
+ Store(0, Index(WKST,0))
+ Store(0, Index(WKST,1))
+
+ Store (0x07, UPWS)
+} /* End Method(\_PTS) */
+
+/*
+* \_BFS OEM Back From Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* -none-
+*/
+Method(\_BFS, 1) {
+ /* DBGO("\\_BFS\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+}
+
+/*
+* \_WAK System Wake method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* Return package of 2 DWords
+* Dword 1 - Status
+* 0x00000000 wake succeeded
+* 0x00000001 Wake was signaled but failed due to lack of power
+* 0x00000002 Wake was signaled but failed due to thermal condition
+* Dword 2 - Power Supply state
+* if non-zero the effective S-state the power supply entered
+*/
+Method(\_WAK, 1) {
+ /* DBGO("\\_WAK\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+
+ /* Re-enable HPET */
+ Store(1,USBS)
+
+ Return(WKST)
+} /* End Method(\_WAK) */
diff --git a/src/mainboard/amd/lamar/acpi/superio.asl b/src/mainboard/amd/lamar/acpi/superio.asl
new file mode 100644
index 0000000..69c6108
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/superio.asl
@@ -0,0 +1 @@
+/* No Super I/O device or functionality yet */
diff --git a/src/mainboard/amd/lamar/acpi/thermal.asl b/src/mainboard/amd/lamar/acpi/thermal.asl
new file mode 100644
index 0000000..edb1daf
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/thermal.asl
@@ -0,0 +1 @@
+/* No thermal zone functionality */
diff --git a/src/mainboard/amd/lamar/acpi/usb_oc.asl b/src/mainboard/amd/lamar/acpi/usb_oc.asl
new file mode 100644
index 0000000..394f201
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/usb_oc.asl
@@ -0,0 +1,31 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* USB overcurrent mapping pins. */
+Name(UOM0, 0)
+Name(UOM1, 2)
+Name(UOM2, 0)
+Name(UOM3, 7)
+Name(UOM4, 2)
+Name(UOM5, 2)
+Name(UOM6, 6)
+Name(UOM7, 2)
+Name(UOM8, 6)
+Name(UOM9, 6)
diff --git a/src/mainboard/amd/lamar/acpi_tables.c b/src/mainboard/amd/lamar/acpi_tables.c
new file mode 100644
index 0000000..1de3df9
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi_tables.c
@@ -0,0 +1,59 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <northbridge/amd/pi/agesawrapper.h>
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/ioapic.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam15.h>
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write southbridge IOAPIC, only one */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS,
+ IO_APIC_ADDR, 0);
+
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1,
+ 0xFEC20000, 24);
+
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0);
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, 0xF);
+ /* 0: mean bus 0--->ISA */
+ /* 0: PIC 0 */
+ /* 2: APIC 2 */
+ /* 5 mean: 0101 --> Edge-triggered, Active high */
+
+ /* create all subtables for processors */
+ current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1);
+ /* 1: LINT1 connect to NMI */
+
+ return current;
+}
diff --git a/src/mainboard/amd/lamar/agesawrapper.c b/src/mainboard/amd/lamar/agesawrapper.c
new file mode 100644
index 0000000..e857de7
--- /dev/null
+++ b/src/mainboard/amd/lamar/agesawrapper.c
@@ -0,0 +1,679 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <cpu/x86/mtrr.h>
+#include <northbridge/amd/pi/agesawrapper.h>
+#include <northbridge/amd/pi/BiosCallOuts.h>
+#include "cpuRegisters.h"
+#include "cpuCacheInit.h"
+#include "cpuApicUtilities.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "Dispatcher.h"
+#include "cpuCacheInit.h"
+#include "amdlib.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "FchPlatform.h"
+#include "Fch.h"
+#include <cpu/amd/pi/s3_resume.h>
+#include <cbmem.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include "hudson.h"
+
+VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr);
+VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr);
+
+#define FILECODE UNASSIGNED_FILE_FILECODE
+
+#ifndef __PRE_RAM__
+/* ACPI table pointers returned by AmdInitLate */
+static void *DmiTable = NULL;
+static void *AcpiPstate = NULL;
+static void *AcpiSrat = NULL;
+static void *AcpiSlit = NULL;
+
+static void *AcpiWheaMce = NULL;
+static void *AcpiWheaCmc = NULL;
+static void *AcpiAlib = NULL;
+static void *AcpiIvrs = NULL;
+static void *AcpiCrat = NULL;
+#endif
+
+AGESA_STATUS agesawrapper_amdinitcpuio(void)
+{
+ AGESA_STATUS Status;
+ UINT64 MsrReg;
+ UINT32 PciData;
+ PCI_ADDR PciAddress;
+ AMD_CONFIG_PARAMS StdHeader;
+
+ /* Enable legacy video routing: D18F1xF4 VGA Enable */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4);
+ PciData = 1;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+ /* The platform BIOS needs to ensure the memory ranges of southbridge legacy
+ * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are
+ * set to non-posted regions.
+ */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84);
+ PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */
+ PciData |= 1 << 7; /* set NP (non-posted) bit */
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80);
+ PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+ /* Map the remaining PCI hole as posted MMIO */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C);
+ PciData = 0x00FECF00; /* last address before non-posted range */
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader);
+ MsrReg = (MsrReg >> 8) | 3;
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88);
+ PciData = (UINT32)MsrReg;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+ /* Send all IO (0000-FFFF) to southbridge. */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4);
+ PciData = 0x0000F000;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0);
+ PciData = 0x00000003;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ Status = AGESA_SUCCESS;
+ return Status;
+}
+
+AGESA_STATUS agesawrapper_amdinitmmio(void)
+{
+ AGESA_STATUS Status;
+ UINT64 MsrReg;
+ UINT32 PciData;
+ PCI_ADDR PciAddress;
+ AMD_CONFIG_PARAMS StdHeader;
+
+ /*
+ Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base
+ Address MSR register.
+ */
+ MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1;
+ LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader);
+
+ /*
+ Set the NB_CFG MSR register. Enable CF8 extended configuration cycles.
+ */
+ LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader);
+ MsrReg = MsrReg | 0x0000400000000000;
+ LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader);
+
+ /* For serial port */
+ PciData = 0xFF03FFD5;
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44);
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+ /* Set ROM cache onto WP to decrease post time */
+ MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull;
+ LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader);
+ MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull;
+ LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader);
+
+ Status = AGESA_SUCCESS;
+ return Status;
+}
+
+AGESA_STATUS agesawrapper_amdinitreset(void)
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_RESET_PARAMS AmdResetParams;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ LibAmdMemFill (&AmdResetParams,
+ 0,
+ sizeof (AMD_RESET_PARAMS),
+ &(AmdResetParams.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET;
+ AmdParamStruct.AllocationMethod = ByHost;
+ AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS);
+ AmdParamStruct.NewStructPtr = &AmdResetParams;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+ AmdCreateStruct (&AmdParamStruct);
+
+ AmdResetParams.FchInterface.Xhci0Enable = IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE);
+ AmdResetParams.FchInterface.Xhci1Enable = TRUE;
+
+ AmdResetParams.FchInterface.SataEnable = !(IS_ENABLED(CONFIG_HUDSON_SATA_IDE) || IS_ENABLED(CONFIG_HUDSON_SATA_LEGACY_IDE));
+ AmdResetParams.FchInterface.IdeEnable = (IS_ENABLED(CONFIG_HUDSON_SATA_IDE) || IS_ENABLED(CONFIG_HUDSON_SATA_LEGACY_IDE));
+
+ status = AmdInitReset(&AmdResetParams);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+ AmdReleaseStruct (&AmdParamStruct);
+ return status;
+}
+
+AGESA_STATUS agesawrapper_amdinitearly(void)
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_EARLY_PARAMS *AmdEarlyParamsPtr;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY;
+ AmdParamStruct.AllocationMethod = PreMemHeap;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+ AmdCreateStruct (&AmdParamStruct);
+
+ AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr;
+ OemCustomizeInitEarly (AmdEarlyParamsPtr);
+
+ status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+ AmdReleaseStruct (&AmdParamStruct);
+
+ return status;
+}
+
+AGESA_STATUS agesawrapper_amdinitpost(void)
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_POST_PARAMS *PostParams;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_POST;
+ AmdParamStruct.AllocationMethod = PreMemHeap;
+ AmdParamStruct.StdHeader.AltImageBasePtr = NULL;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+ AmdCreateStruct (&AmdParamStruct);
+ PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr;
+
+ // Do not use IS_ENABLED here. CONFIG_GFXUMA should always have a value. Allow
+ // the compiler to flag the error if CONFIG_GFXUMA is not set.
+ PostParams->MemConfig.UmaMode = CONFIG_GFXUMA ? UMA_AUTO : UMA_NONE;
+ PostParams->MemConfig.UmaSize = 0;
+ status = AmdInitPost (PostParams);
+ printk(
+ BIOS_SPEW,
+ "setup_uma_memory: umamode %s\n",
+ (PostParams->MemConfig.UmaMode == UMA_AUTO) ? "UMA_AUTO" :
+ (PostParams->MemConfig.UmaMode == UMA_SPECIFIED) ? "UMA_SPECIFIED" :
+ (PostParams->MemConfig.UmaMode == UMA_NONE) ? "UMA_NONE" :
+ "unknown"
+ );
+ printk(
+ BIOS_SPEW,
+ "setup_uma_memory: syslimit 0x%08llX, bottomio 0x%08lx\n",
+ (unsigned long long)(PostParams->MemConfig.SysLimit) << 16,
+ (unsigned long)(PostParams->MemConfig.BottomIo) << 16
+ );
+ printk(
+ BIOS_SPEW,
+ "setup_uma_memory: uma size %luMB, uma start 0x%08lx\n",
+ (unsigned long)(PostParams->MemConfig.UmaSize) >> (20 - 16),
+ (unsigned long)(PostParams->MemConfig.UmaBase) << 16
+ );
+
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus);
+ AmdReleaseStruct (&AmdParamStruct);
+ /* Initialize heap space */
+ EmptyHeap();
+
+ return status;
+}
+
+AGESA_STATUS agesawrapper_amdinitenv(void)
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_ENV_PARAMS *EnvParam;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV;
+ AmdParamStruct.AllocationMethod = PostMemDram;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+ status = AmdCreateStruct (&AmdParamStruct);
+ EnvParam = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr;
+
+ EnvParam->FchInterface.AzaliaController = AzEnable;
+ EnvParam->FchInterface.SataClass = CONFIG_HUDSON_SATA_MODE;
+ EnvParam->FchInterface.SataEnable = !(IS_ENABLED(CONFIG_HUDSON_SATA_IDE) || IS_ENABLED(CONFIG_HUDSON_SATA_LEGACY_IDE));
+ EnvParam->FchInterface.IdeEnable = (IS_ENABLED(CONFIG_HUDSON_SATA_IDE) || IS_ENABLED(CONFIG_HUDSON_SATA_LEGACY_IDE));
+ EnvParam->FchInterface.SataIdeMode = IS_ENABLED(CONFIG_HUDSON_SATA_LEGACY_IDE);
+ EnvParam->GnbEnvConfiguration.IommuSupport = FALSE;
+
+ status = AmdInitEnv (EnvParam);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(EnvParam->StdHeader.HeapStatus);
+ /* Initialize Subordinate Bus Number and Secondary Bus Number
+ * In platform BIOS this address is allocated by PCI enumeration code
+ Modify D1F0x18
+ */
+
+ return status;
+}
+
+#ifndef __PRE_RAM__
+VOID* agesawrapper_getlateinitptr (int pick)
+{
+ switch (pick) {
+ case PICK_DMI:
+ return DmiTable;
+ case PICK_PSTATE:
+ return AcpiPstate;
+ case PICK_SRAT:
+ return AcpiSrat;
+ case PICK_SLIT:
+ return AcpiSlit;
+ case PICK_WHEA_MCE:
+ return AcpiWheaMce;
+ case PICK_WHEA_CMC:
+ return AcpiWheaCmc;
+ case PICK_ALIB:
+ return AcpiAlib;
+ case PICK_IVRS:
+ return AcpiIvrs;
+ case PICK_CRAT:
+ return AcpiCrat;
+ default:
+ return NULL;
+ }
+}
+#endif
+
+AGESA_STATUS agesawrapper_amdinitmid(void)
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_MID_PARAMS *MidParam;
+
+ /* Enable MMIO on AMD CPU Address Map Controller */
+ agesawrapper_amdinitcpuio ();
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_MID;
+ AmdParamStruct.AllocationMethod = PostMemDram;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+ AmdCreateStruct (&AmdParamStruct);
+ MidParam = (AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr;
+
+ MidParam->GnbMidConfiguration.iGpuVgaMode = 0;/* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */
+ MidParam->GnbMidConfiguration.GnbIoapicAddress = 0xFEC20000;
+
+ MidParam->FchInterface.AzaliaController = AzEnable;
+ MidParam->FchInterface.SataClass = CONFIG_HUDSON_SATA_MODE;
+ MidParam->FchInterface.SataEnable = !(IS_ENABLED(CONFIG_HUDSON_SATA_IDE) || IS_ENABLED(CONFIG_HUDSON_SATA_LEGACY_IDE));
+ MidParam->FchInterface.IdeEnable = (IS_ENABLED(CONFIG_HUDSON_SATA_IDE) || IS_ENABLED(CONFIG_HUDSON_SATA_LEGACY_IDE));
+ MidParam->FchInterface.SataIdeMode = IS_ENABLED(CONFIG_HUDSON_SATA_LEGACY_IDE);
+
+ status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+ AmdReleaseStruct (&AmdParamStruct);
+
+ return status;
+}
+
+#ifndef __PRE_RAM__
+AGESA_STATUS agesawrapper_amdinitlate(void)
+{
+ AGESA_STATUS Status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_LATE_PARAMS *AmdLateParams;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE;
+ AmdParamStruct.AllocationMethod = PostMemDram;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+ /* NOTE: if not call amdcreatestruct, the initializer(AmdInitLateInitializer) would not be called */
+ AmdCreateStruct(&AmdParamStruct);
+ AmdLateParams = (AMD_LATE_PARAMS *)AmdParamStruct.NewStructPtr;
+ Status = AmdInitLate(AmdLateParams);
+ if (Status != AGESA_SUCCESS) {
+ agesawrapper_amdreadeventlog(AmdLateParams->StdHeader.HeapStatus);
+ ASSERT(Status == AGESA_SUCCESS);
+ }
+
+ DmiTable = AmdLateParams->DmiTable;
+ AcpiPstate = AmdLateParams->AcpiPState;
+ AcpiSrat = AmdLateParams->AcpiSrat;
+ AcpiSlit = AmdLateParams->AcpiSlit;
+
+ AcpiWheaMce = AmdLateParams->AcpiWheaMce;
+ AcpiWheaCmc = AmdLateParams->AcpiWheaCmc;
+ AcpiAlib = AmdLateParams->AcpiAlib;
+ AcpiIvrs = AmdLateParams->AcpiIvrs;
+ AcpiCrat = AmdLateParams->AcpiCrat;
+
+ printk(BIOS_DEBUG, "DmiTable:%x, AcpiPstatein: %x, AcpiSrat:%x,"
+ "AcpiSlit:%x, Mce:%x, Cmc:%x,"
+ "Alib:%x, AcpiIvrs:%x in %s\n",
+ (unsigned int)DmiTable, (unsigned int)AcpiPstate, (unsigned int)AcpiSrat,
+ (unsigned int)AcpiSlit, (unsigned int)AcpiWheaMce, (unsigned int)AcpiWheaCmc,
+ (unsigned int)AcpiAlib, (unsigned int)AcpiIvrs, __func__);
+
+ /* AmdReleaseStruct (&AmdParamStruct); */
+ return Status;
+}
+#endif
+
+AGESA_STATUS agesawrapper_amdlaterunaptask (
+ UINT32 Func,
+ UINT32 Data,
+ VOID *ConfigPtr
+ )
+{
+ AGESA_STATUS Status;
+ AP_EXE_PARAMS ApExeParams;
+
+ LibAmdMemFill (&ApExeParams,
+ 0,
+ sizeof (AP_EXE_PARAMS),
+ &(ApExeParams.StdHeader));
+
+ ApExeParams.StdHeader.AltImageBasePtr = 0;
+ ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ ApExeParams.StdHeader.Func = 0;
+ ApExeParams.StdHeader.ImageBasePtr = 0;
+ ApExeParams.FunctionNumber = Func;
+ ApExeParams.RelatedDataBlock = ConfigPtr;
+
+ Status = AmdLateRunApTask (&ApExeParams);
+ if (Status != AGESA_SUCCESS) {
+ /* agesawrapper_amdreadeventlog(); */
+ ASSERT(Status == AGESA_SUCCESS);
+ }
+
+ return Status;
+}
+
+#if CONFIG_HAVE_ACPI_RESUME
+
+AGESA_STATUS agesawrapper_amdinitresume(void)
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_RESUME_PARAMS *AmdResumeParamsPtr;
+ S3_DATA_TYPE S3DataType;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME;
+ AmdParamStruct.AllocationMethod = PreMemHeap;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+ AmdCreateStruct (&AmdParamStruct);
+
+ AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr;
+
+ AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0;
+ AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0;
+ S3DataType = S3DataTypeNonVolatile;
+ OemAgesaGetS3Info (S3DataType,
+ (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize,
+ (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage);
+
+ status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr);
+
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+ AmdReleaseStruct (&AmdParamStruct);
+
+ return status;
+}
+
+#ifndef __PRE_RAM__
+AGESA_STATUS agesawrapper_fchs3earlyrestore(void)
+{
+ AGESA_STATUS status = AGESA_SUCCESS;
+
+ FCH_DATA_BLOCK FchParams;
+ AMD_CONFIG_PARAMS StdHeader;
+
+ StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+ StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10;
+ StdHeader.AltImageBasePtr = 0;
+ StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ StdHeader.Func = 0;
+ StdHeader.ImageBasePtr = 0;
+
+ LibAmdMemFill (&FchParams,
+ 0,
+ sizeof (FchParams),
+ &StdHeader);
+
+ FchParams.StdHeader = &StdHeader;
+ s3_resume_init_data(&FchParams);
+
+ FchInitS3EarlyRestore(&FchParams);
+
+ return status;
+}
+#endif
+
+AGESA_STATUS agesawrapper_amds3laterestore(void)
+{
+ AGESA_STATUS Status;
+ AMD_INTERFACE_PARAMS AmdInterfaceParams;
+ AMD_S3LATE_PARAMS AmdS3LateParams;
+ AMD_S3LATE_PARAMS *AmdS3LateParamsPtr;
+ S3_DATA_TYPE S3DataType;
+
+ agesawrapper_amdinitcpuio();
+ LibAmdMemFill (&AmdS3LateParams,
+ 0,
+ sizeof (AMD_S3LATE_PARAMS),
+ &(AmdS3LateParams.StdHeader));
+ AmdInterfaceParams.StdHeader.ImageBasePtr = 0;
+ AmdInterfaceParams.AllocationMethod = ByHost;
+ AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE;
+ AmdInterfaceParams.NewStructPtr = &AmdS3LateParams;
+ AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdS3LateParamsPtr = &AmdS3LateParams;
+ AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS);
+
+ AmdCreateStruct (&AmdInterfaceParams);
+
+ AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0;
+ S3DataType = S3DataTypeVolatile;
+
+ OemAgesaGetS3Info (S3DataType,
+ (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize,
+ (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage);
+
+ Status = AmdS3LateRestore (AmdS3LateParamsPtr);
+ if (Status != AGESA_SUCCESS) {
+ agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus);
+ ASSERT(Status == AGESA_SUCCESS);
+ }
+
+ return Status;
+}
+
+#ifndef __PRE_RAM__
+
+AGESA_STATUS agesawrapper_fchs3laterestore(void)
+{
+ AGESA_STATUS status = AGESA_SUCCESS;
+
+ AMD_CONFIG_PARAMS StdHeader;
+ FCH_DATA_BLOCK FchParams;
+
+ StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+ StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10;
+ StdHeader.AltImageBasePtr = 0;
+ StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ StdHeader.Func = 0;
+ StdHeader.ImageBasePtr = 0;
+
+ LibAmdMemFill (&FchParams,
+ 0,
+ sizeof (FchParams),
+ &StdHeader);
+
+ FchParams.StdHeader = &StdHeader;
+ s3_resume_init_data(&FchParams);
+ FchInitS3LateRestore(&FchParams);
+
+ return status;
+}
+#endif
+
+#ifndef __PRE_RAM__
+
+AGESA_STATUS agesawrapper_amdS3Save(void)
+{
+ AGESA_STATUS Status;
+ AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr;
+ AMD_INTERFACE_PARAMS AmdInterfaceParams;
+ S3_DATA_TYPE S3DataType;
+
+ LibAmdMemFill (&AmdInterfaceParams,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdInterfaceParams.StdHeader));
+
+ AmdInterfaceParams.StdHeader.ImageBasePtr = 0;
+ AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+ AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdInterfaceParams.AllocationMethod = PostMemDram;
+ AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE;
+ AmdInterfaceParams.StdHeader.AltImageBasePtr = 0;
+ AmdInterfaceParams.StdHeader.Func = 0;
+
+ AmdCreateStruct(&AmdInterfaceParams);
+ AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr;
+ AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader;
+
+ Status = AmdS3Save(AmdS3SaveParamsPtr);
+ if (Status != AGESA_SUCCESS) {
+ agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus);
+ ASSERT(Status == AGESA_SUCCESS);
+ }
+
+ S3DataType = S3DataTypeNonVolatile;
+ printk(BIOS_DEBUG, "NvStorageSize=%x, NvStorage=%x\n",
+ (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize,
+ (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorage);
+
+ Status = OemAgesaSaveS3Info (
+ S3DataType,
+ AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize,
+ AmdS3SaveParamsPtr->S3DataBlock.NvStorage);
+
+ printk(BIOS_DEBUG, "VolatileStorageSize=%x, VolatileStorage=%x\n",
+ (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize,
+ (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage);
+
+ if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) {
+ S3DataType = S3DataTypeVolatile;
+
+ Status = OemAgesaSaveS3Info (
+ S3DataType,
+ AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize,
+ AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage);
+ }
+ OemAgesaSaveMtrr();
+
+ AmdReleaseStruct (&AmdInterfaceParams);
+
+ return Status;
+}
+
+#endif /* #ifndef __PRE_RAM__ */
+#endif /* CONFIG_HAVE_ACPI_RESUME */
+
+AGESA_STATUS agesawrapper_amdreadeventlog (UINT8 HeapStatus)
+{
+ AGESA_STATUS Status;
+ EVENT_PARAMS AmdEventParams;
+
+ LibAmdMemFill (&AmdEventParams,
+ 0,
+ sizeof (EVENT_PARAMS),
+ &(AmdEventParams.StdHeader));
+
+ AmdEventParams.StdHeader.AltImageBasePtr = 0;
+ AmdEventParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdEventParams.StdHeader.Func = 0;
+ AmdEventParams.StdHeader.ImageBasePtr = 0;
+ AmdEventParams.StdHeader.HeapStatus = HeapStatus;
+ Status = AmdReadEventLog (&AmdEventParams);
+ while (AmdEventParams.EventClass != 0) {
+ printk(BIOS_DEBUG,"\nEventLog: EventClass = %x, EventInfo = %x.\n", (unsigned int)AmdEventParams.EventClass,(unsigned int)AmdEventParams.EventInfo);
+ printk(BIOS_DEBUG," Param1 = %x, Param2 = %x.\n",(unsigned int)AmdEventParams.DataParam1, (unsigned int)AmdEventParams.DataParam2);
+ printk(BIOS_DEBUG," Param3 = %x, Param4 = %x.\n",(unsigned int)AmdEventParams.DataParam3, (unsigned int)AmdEventParams.DataParam4);
+ Status = AmdReadEventLog (&AmdEventParams);
+ }
+
+ return Status;
+}
diff --git a/src/mainboard/amd/lamar/board_info.txt b/src/mainboard/amd/lamar/board_info.txt
new file mode 100644
index 0000000..8bce92e
--- /dev/null
+++ b/src/mainboard/amd/lamar/board_info.txt
@@ -0,0 +1,5 @@
+Board name: DB-FP3 (Lamar)
+Category: eval
+ROM package: SOIC-8
+ROM protocol: SPI
+ROM socketed: n
diff --git a/src/mainboard/amd/lamar/cmos.layout b/src/mainboard/amd/lamar/cmos.layout
new file mode 100644
index 0000000..5520564
--- /dev/null
+++ b/src/mainboard/amd/lamar/cmos.layout
@@ -0,0 +1,114 @@
+#*****************************************************************************
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#*****************************************************************************
+
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 multi_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 amd_reserved
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+8 0 400Mhz
+8 1 333Mhz
+8 2 266Mhz
+8 3 200Mhz
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
diff --git a/src/mainboard/amd/lamar/devicetree.cb b/src/mainboard/amd/lamar/devicetree.cb
new file mode 100644
index 0000000..eb41942
--- /dev/null
+++ b/src/mainboard/amd/lamar/devicetree.cb
@@ -0,0 +1,118 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+# 2013 - 2014 Sage Electronic Engineering, LLC
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+chip northbridge/amd/pi/00630F01/root_complex
+ device cpu_cluster 0 on
+ chip cpu/amd/pi/00630F01
+ device lapic 10 on end
+ end
+ end
+
+ device domain 0 on
+ subsystemid 0x1022 0x1410 inherit
+ chip northbridge/amd/pi/00630F01 # CPU side of HT root complex
+
+ chip northbridge/amd/pi/00630F01 # PCI side of HT root complex
+ device pci 0.0 on end # 0x1422 Root Complex
+ device pci 0.2 off end # 0x1423 IOMMU
+ device pci 1.0 on end # 0x13XX Internal Graphics
+ device pci 1.1 on end # 0x1308 DisplayPort/HDMI Audio
+ device pci 2.0 on end # 0x1424 GFX PCIe Host Bridge
+ device pci 2.1 on end # 0x1425 P2P Bridge for GFX PCIe Port 0 (PCIe x16 slot J119)
+ device pci 2.2 off end # 0x1425 P2P Bridge for GFX PCIe Port 1
+ device pci 3.0 on end # 0x1424 GPP PCIe Host Bridge
+ device pci 3.1 on end # 0x1426 P2P Bridge for GPP PCIe Port 0 (PCIe x4 slot J118)
+ device pci 3.2 on end # 0x1426 P2P Bridge for GPP PCIe Port 1 (PCIe x4 slot J120)
+ device pci 3.3 off end # 0x1426 P2P Bridge for GPP PCIe Port 2
+ device pci 3.4 off end # 0x1426 P2P Bridge for GPP PCIe Port 3
+ device pci 3.5 off end # 0x1426 P2P Bridge for GPP PCIe Port 4
+ device pci 4.0 on end # 0x1424 UMI PCIe Host Bridge
+# device pci 4.1 on end # 0x1426 P2P bridge for UMI link
+# device pci 4.2 off end # 0x1426 Virtual P2P bridge for SB PCIe Port 3
+# device pci 4.3 off end # 0x1426 Virtual P2P bridge for SB PCIe Port 2
+# device pci 4.4 off end # 0x1426 Virtual P2P bridge for SB PCIe Port 1
+# device pci 4.5 off end # 0x1426 Virtual P2P bridge for SB PCIe Port 0
+ end #chip northbridge/amd/pi/00630F01
+
+ chip southbridge/amd/pi/hudson
+ device pci 10.0 on end # 0x7814 XHCI HC0
+ device pci 10.1 on end # 0x7814 XHCI HC1
+ device pci 11.0 on end # 0x7800-0x7805 SATA (device ID depends on mode)
+ device pci 12.0 on end # 0x7807 USB OHCI
+ device pci 12.2 on end # 0x7808 USB EHCI
+ device pci 13.0 on end # 0x7807 USB OHCI
+ device pci 13.2 on end # 0x7808 USB EHCI
+ device pci 14.0 on # 0x780B SMBus
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+ end # SM
+ device pci 14.1 on end # 0x780C IDE
+ device pci 14.2 on end # 0x780D HDA
+ device pci 14.3 on # 0x780E LPC
+ chip superio/fintek/f81216h
+ device pnp 4e.0 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 3
+ end
+ device pnp 4e.1 on # COM2
+ io 0x60 = 0x2f8
+ irq 0x70 = 4
+ end
+ device pnp 4e.2 off end # COM3
+ device pnp 4e.3 off end # COM4
+ device pnp 4e.8 off end # WDT
+ end # f81865f
+ end #LPC
+ device pci 14.4 on end # 0x780F PCI :: PCI-b conflict with GPIO.
+ device pci 14.5 on end # 0x7809 USB OHCI
+ device pci 14.7 on end # 0x7806 SD Flash Controller
+ register "sd_mode" = "3"
+ device pci 15.0 on end # 0x43A0 SB GPP Port 0 (Integrated Realtek GbE Controller)
+ device pci 15.1 on end # 0x43A1 SB GPP Port 1 (mPCIe slot J122)
+ device pci 15.2 on end # 0x43A2 SB GPP Port 2 (mPCIe slot J123)
+ device pci 15.3 off end # 0x43A3 SB GPP Port 3
+ register "gpp_configuration" = "4"
+ device pci 16.0 on end # 0x7809 USB OHCI (when the xHCI device is disabled)
+ end #southbridge/amd/pi/hudson
+
+ device pci 18.0 on end # 0x141A HT Configuration
+ device pci 18.1 on end # 0x141B Address Maps
+ device pci 18.2 on end # 0x141C DRAM Configuration
+ device pci 18.3 on end # 0x141D Miscellaneous
+ device pci 18.4 on end # 0x141E Power Management
+ device pci 18.5 on end # 0x141F Northbridge
+
+ register "spdAddrLookup" = "
+ {
+ { {0xA0, 0xA4}, {0xA2, 0xA6}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
+ }"
+
+ end #chip northbridge/amd/pi/00630F01 # CPU side of HT root complex
+ end #domain
+end #northbridge/amd/pi/00630F01/root_complex
diff --git a/src/mainboard/amd/lamar/dsdt.asl b/src/mainboard/amd/lamar/dsdt.asl
new file mode 100644
index 0000000..dcf164b
--- /dev/null
+++ b/src/mainboard/amd/lamar/dsdt.asl
@@ -0,0 +1,91 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+ "DSDT.AML", /* Output filename */
+ "DSDT", /* Signature */
+ 0x02, /* DSDT Revision, needs to be 2 for 64bit */
+ "AMD ", /* OEMID */
+ "COREBOOT", /* TABLE ID */
+ 0x00010001 /* OEM Revision */
+ )
+{ /* Start of ASL file */
+ /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */
+
+ /* Globals for the platform */
+ #include "acpi/mainboard.asl"
+
+ /* Describe the USB Overcurrent pins */
+ #include "acpi/usb_oc.asl"
+
+ /* PCI IRQ mapping for the Southbridge */
+ #include <southbridge/amd/pi/hudson/acpi/pcie.asl>
+
+ /* Describe the processor tree (\_PR) */
+ #include <cpu/amd/pi/00630F01/acpi/cpu.asl>
+
+ /* Contains the supported sleep states for this chipset */
+ #include <southbridge/amd/pi/hudson/acpi/sleepstates.asl>
+
+ /* Contains the Sleep methods (WAK, PTS, GTS, etc.) */
+ #include "acpi/sleep.asl"
+
+ /* System Bus */
+ Scope(\_SB) { /* Start \_SB scope */
+ /* global utility methods expected within the \_SB scope */
+ #include <arch/x86/acpi/globutil.asl>
+
+ /* Describe IRQ Routing mapping for this platform (within the \_SB scope) */
+ #include "acpi/routing.asl"
+
+ Device(PWRB) {
+ Name(_HID, EISAID("PNP0C0C"))
+ Name(_UID, 0xAA)
+ Name(_PRW, Package () {3, 0x04})
+ Name(_STA, 0x0B)
+ }
+
+ Device(PCI0) {
+ /* Describe the AMD Northbridge */
+ #include <northbridge/amd/pi/00630F01/acpi/northbridge.asl>
+
+ /* Describe the AMD Fusion Controller Hub Southbridge */
+ #include <southbridge/amd/pi/hudson/acpi/fch.asl>
+ }
+
+ /* Describe PCI INT[A-H] for the Southbridge */
+ #include <southbridge/amd/pi/hudson/acpi/pci_int.asl>
+
+ } /* End \_SB scope */
+
+ /* Describe SMBUS for the Southbridge */
+ #include <southbridge/amd/pi/hudson/acpi/smbus.asl>
+
+ /* Define the General Purpose Events for the platform */
+ #include "acpi/gpe.asl"
+
+ /* Define the Thermal zones and methods for the platform */
+ #include "acpi/thermal.asl"
+
+ /* Define the System Indicators for the platform */
+ #include "acpi/si.asl"
+}
+/* End of ASL file */
diff --git a/src/mainboard/amd/lamar/get_bus_conf.c b/src/mainboard/amd/lamar/get_bus_conf.c
new file mode 100644
index 0000000..5d03cb5
--- /dev/null
+++ b/src/mainboard/amd/lamar/get_bus_conf.c
@@ -0,0 +1,150 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <cpu/amd/amdfam15.h>
+#include <northbridge/amd/pi/agesawrapper.h>
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+#include "imc.h"
+#endif
+
+/* Global variables for MB layouts and these will be shared by irqtable mptable
+ * and acpi_tables busnum is default.
+ */
+u8 bus_isa;
+u8 bus_sb[16];
+u32 apicid_sb, apicid_nb;
+
+/*
+ * Here you only need to set value in pci1234 for HT-IO that could be installed or not
+ * You may need to preset pci1234 for HTIO board,
+ * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
+ */
+u32 pci1234x[] = {
+ 0x0000ff0,
+};
+
+u32 bus_type[256];
+u32 sbdn_sb;
+
+static u32 get_bus_conf_done = 0;
+
+#if CONFIG_HAVE_ACPI_RESUME
+extern u8 acpi_slp_type;
+#endif
+void get_bus_conf(void)
+{
+ u32 apicid_base;
+ u32 status;
+
+ device_t dev;
+ int i, j;
+
+ if (get_bus_conf_done == 1)
+ return; /* do it only once */
+
+ get_bus_conf_done = 1;
+
+ /*
+ * This is the call to AmdInitLate. It is really in the wrong place, conceptually,
+ * but functionally within the coreboot model, this is the best place to make the
+ * call. The logically correct place to call AmdInitLate is after PCI scan is done,
+ * after the decision about S3 resume is made, and before the system tables are
+ * written into RAM. The routine that is responsible for writing the tables is
+ * "write_tables", called near the end of "hardwaremain". There is no platform
+ * specific entry point between the S3 resume decision point and the call to
+ * "write_tables", and the next platform specific entry points are the calls to
+ * the ACPI table write functions. The first of ose would seem to be the right
+ * place, but other table write functions, e.g. the PIRQ table write function, are
+ * called before the ACPI tables are written. This routine is called at the beginning
+ * of each of the write functions called prior to the ACPI write functions, so this
+ * becomes the best place for this call.
+ */
+#if CONFIG_HAVE_ACPI_RESUME
+ if (acpi_slp_type != 3) {
+ status = agesawrapper_amdinitlate();
+ if(status) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
+ }
+ status = agesawrapper_amdS3Save();
+ if (status) {
+ printk(BIOS_DEBUG, "agesawrapper_amds3save failed: %x \n", status);
+ }
+ }
+#else
+ status = agesawrapper_amdinitlate();
+ if (status)
+ printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
+#endif
+
+// setup_ioapic(0xFEC20000, 5);
+// dev = dev_find_slot(0, PCI_DEVFN(0, 0)); /* clear IoapicSbFeatureEn */
+// pci_write_config32(dev, 0xF8, 0);
+// pci_write_config32(dev, 0xFC, 5); /* TODO: move it to dsdt.asl */
+
+ sbdn_sb = 0;
+
+ memset(bus_sb, 0, sizeof(bus_sb));
+
+ for (i = 0; i < 256; i++) {
+ bus_type[i] = 0; /* default ISA bus. */
+ }
+
+ bus_type[0] = 1; /* pci */
+
+ bus_sb[0] = (pci1234x[0] >> 16) & 0xff;
+
+ /* Hudson */
+ dev = dev_find_slot(bus_sb[0], PCI_DEVFN(sbdn_sb + 0x14, 4));
+
+ if (dev) {
+ bus_sb[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ for (j = bus_sb[1]; j < bus_isa; j++)
+ bus_type[j] = 1;
+ }
+
+ for (i = 0; i < 12; i++) {
+ dev = dev_find_slot(bus_sb[0], PCI_DEVFN(sbdn_sb + 0x14, i));
+ if (dev) {
+ bus_sb[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ }
+ }
+ for (j = bus_sb[2]; j < bus_isa; j++)
+ bus_type[j] = 1;
+
+ /* I/O APICs: APIC ID Version State Address */
+ bus_isa = 10;
+ apicid_base = CONFIG_MAX_CPUS;
+ apicid_sb = apicid_base;
+
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+ /* AMD AGESA does not enable thermal zone, so we enable it here. */
+ enable_imc_thermal_zone();
+#endif
+}
diff --git a/src/mainboard/amd/lamar/irq_tables.c b/src/mainboard/amd/lamar/irq_tables.c
new file mode 100644
index 0000000..dc457cc
--- /dev/null
+++ b/src/mainboard/amd/lamar/irq_tables.c
@@ -0,0 +1,112 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+#include <cpu/amd/amdfam15.h>
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+ u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+ u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+ u8 slot, u8 rfu)
+{
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
+}
+
+extern u8 bus_isa;
+extern u8 bus_sb[6];
+extern unsigned long sbdn_sb;
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ struct irq_routing_table *pirq;
+ struct irq_info *pirq_info;
+ u32 slot_num;
+ u8 *v;
+
+ u8 sum = 0;
+ int i;
+
+ get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */
+
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
+
+ /* This table must be betweeen 0xf0000 & 0x100000 */
+ printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+ pirq = (void *)(addr);
+ v = (u8 *) (addr);
+
+ pirq->signature = PIRQ_SIGNATURE;
+ pirq->version = PIRQ_VERSION;
+
+ pirq->rtr_bus = bus_sb[0];
+ pirq->rtr_devfn = ((sbdn_sb + 0x14) << 3) | 4;
+
+ pirq->exclusive_irqs = 0;
+
+ pirq->rtr_vendor = 0x1002;
+ pirq->rtr_device = 0x4384;
+
+ pirq->miniport_data = 0;
+
+ memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+ pirq_info = (void *)(&pirq->checksum + 1);
+ slot_num = 0;
+
+ /* pci bridge */
+ write_pirq_info(pirq_info, bus_sb[0], ((sbdn_sb + 0x14) << 3) | 4,
+ 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+ 0);
+ pirq_info++;
+
+ slot_num++;
+
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
+
+ sum = pirq->checksum - sum;
+
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
+
+ printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+ return (unsigned long)pirq_info;
+}
diff --git a/src/mainboard/amd/lamar/mainboard.c b/src/mainboard/amd/lamar/mainboard.c
new file mode 100644
index 0000000..4bde7a6
--- /dev/null
+++ b/src/mainboard/amd/lamar/mainboard.c
@@ -0,0 +1,208 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <device/pci_def.h>
+#include <arch/acpi.h>
+#include <northbridge/amd/pi/BiosCallOuts.h>
+#include <cpu/amd/pi/s3_resume.h>
+#include <northbridge/amd/pi/agesawrapper.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <northbridge/amd/pi/00630F01/pci_devs.h>
+#include <southbridge/amd/pi/hudson/amd_pci_int_defs.h>
+#include <southbridge/amd/pi/hudson/hudson.h>
+#include <southbridge/amd/pi/hudson/pci_devs.h>
+#include <southbridge/amd/amd_pci_util.h>
+
+/***********************************************************
+ * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01.
+ * This table is responsible for physically routing the PIC and
+ * IOAPIC IRQs to the different PCI devices on the system. It
+ * is read and written via registers 0xC00/0xC01 as an
+ * Index/Data pair. These values are chipset and mainboard
+ * dependent and should be updated accordingly.
+ *
+ * These values are used by the PCI configuration space,
+ * MP Tables. TODO: Make ACPI use these values too.
+ */
+const u8 mainboard_picr_data[] = {
+#if defined(__GNUC__)
+ [0 ... FCH_INT_TABLE_SIZE-1] = 0x1F,
+#endif
+ /*
+ * [80..81] Northbridge devices (these indicies are beyond
+ * the southbridge C00/C01 range)
+ */
+ [PIRQ_GFX] = 0x0C,
+ [PIRQ_ACTL] = 0x1F,
+ /* [00..07] INTA# - INTH# */
+ [PIRQ_A] = 0x0A,
+ [PIRQ_B] = 0x0B,
+ [PIRQ_C] = 0x0A,
+ [PIRQ_D] = 0x0B,
+ [PIRQ_E] = 0x0A,
+ [PIRQ_F] = 0x0B,
+ [PIRQ_G] = 0x0A,
+ [PIRQ_H] = 0x0B,
+ /* [08..0B] MISC, MISC0, MISC1 (HPET lower bits), MISC2 (HPET upper bits) */
+ [PIRQ_MISC] = 0xFA,
+ [PIRQ_MISC0] = 0xF1,
+ [PIRQ_MISC1] = 0x00, /* HPET lower bits */
+ [PIRQ_MISC2] = 0x00, /* HPET upper bits */
+ /* [0C..0F] INT from Serial irq */
+ /* [10..1F] SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon, SD */
+// [PIRQ_SD] = 0x0E,
+ /* [20..25] IMC INT0 - 5 */
+ /* [30..37] USB Devs 18/19/22/20 INTA-C */
+ [PIRQ_EHCI1] = 0x0A,
+ [PIRQ_OHCI1] = 0x0B,
+ [PIRQ_EHCI2] = 0x0A,
+ [PIRQ_OHCI2] = 0x0B,
+ [PIRQ_EHCI3] = 0x0A,
+ [PIRQ_OHCI3] = 0x0B,
+ [PIRQ_OHCI4] = 0x0B,
+ /* [40..41] IDE, SATA */
+ [PIRQ_IDE] = 0x0A,
+ [PIRQ_SATA] = 0x09,
+ /* [50..57] GPPInt0 - 3 */
+ [PIRQ_GPP0] = 0x0A,
+ [PIRQ_GPP1] = 0x0B,
+ [PIRQ_GPP2] = 0x0A,
+ [PIRQ_GPP3] = 0x0B,
+};
+
+const u8 mainboard_intr_data[] = {
+#if defined(__GNUC__)
+ [0 ... FCH_INT_TABLE_SIZE-1] = 0x1F,
+#endif
+ /* [80..81] Northbridge devices (indicies above C00/C01 range) */
+ [PIRQ_GFX] = 0x0C,
+ [PIRQ_ACTL] = 0x10,
+ /* [00..07] INTA# - INTH# */
+ [PIRQ_A] = 0x10,
+ [PIRQ_B] = 0x11,
+ [PIRQ_C] = 0x12,
+ [PIRQ_D] = 0x13,
+ [PIRQ_E] = 0x14,
+ [PIRQ_F] = 0x15,
+ [PIRQ_G] = 0x16,
+ [PIRQ_H] = 0x17,
+ /* [08..0B] Misc-nil,0,1,2, INT from Serial irq */
+ [PIRQ_MISC] = 0x00,
+ [PIRQ_MISC0] = 0x00,
+ [PIRQ_MISC1] = 0x00, /* HPET lower bits */
+ [PIRQ_MISC2] = 0x00, /* HPET upper bits */
+ /* [0C..0F] INT from Serial irq */
+ /* [10..1F] SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon, SD */
+ [PIRQ_SCI] = 0x09,
+ [PIRQ_HDA] = 0x10,
+// [PIRQ_SD] = 0x12,
+ /* [20..25] IMC INT0 - 5 */
+ /* [30..37] USB Devs 18/19/22/20 INTA-C */
+ [PIRQ_EHCI1] = 0x11,
+ [PIRQ_OHCI1] = 0x12,
+ [PIRQ_EHCI2] = 0x11,
+ [PIRQ_OHCI2] = 0x12,
+ [PIRQ_EHCI3] = 0x11,
+ [PIRQ_OHCI3] = 0x12,
+ [PIRQ_OHCI4] = 0x12,
+ /* [40..41] IDE, SATA */
+ [PIRQ_IDE] = 0x11,
+ [PIRQ_SATA] = 0x13,
+ /* [50..57] GPPInt0 - 3 */
+ [PIRQ_GPP0] = 0x10,
+ [PIRQ_GPP1] = 0x11,
+ [PIRQ_GPP2] = 0x12,
+ [PIRQ_GPP3] = 0x13,
+};
+
+/*
+ * This table defines the index into the picr/intr_data
+ * tables for each device. Any enabled device and slot
+ * that uses hardware interrupts should have an entry
+ * in this table to define its index into the FCH
+ * PCI_INTR register 0xC00/0xC01. This index will define
+ * the interrupt that it should use. Putting PIRQ_A into
+ * the PIN A index for a device will tell that device to
+ * use PIC IRQ 10 if it uses PIN A for its hardware INT.
+ */
+static const struct pirq_struct mainboard_pirq_data[] = {
+ /* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */
+// {GFX_DEVFN, {PIRQ_GFX, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */
+// {ACTL_DEVFN, {PIRQ_NC, PIRQ_ACTL, PIRQ_NC, PIRQ_NC}}, /* Audio: 01.1 */
+ {NB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* PCIe J119: 02.1 */
+ {NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* PCIe J118: 03.1 */
+ {NB_PCIE_PORT4_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* PCIe J120: 03.2 */
+ {XHCI_DEVFN, {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* XHCI: 10.0 */
+ {XHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* XHCI: 10.1 */
+ {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */
+ {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */
+ {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */
+ {OHCI2_DEVFN, {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2: 13.0 */
+ {EHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2: 13.2 */
+ {SMBUS_DEVFN, {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS: 14.0 */
+ {IDE_DEVFN, {PIRQ_NC, PIRQ_IDE, PIRQ_NC, PIRQ_NC}}, /* IDE: 14.1 */
+ {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */
+ {SB_PCI_PORT_DEVFN, {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}}, /* PCI: 14.4 */
+ {OHCI4_DEVFN, {PIRQ_NC, PIRQ_NC, PIRQ_OHCI4, PIRQ_NC}}, /* OHCI4: 14.5 */
+// {SD_DEVFN, {PIRQ_SD, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SD: 14.7 */
+ {SB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* LAN: 15.0 */
+ {SB_PCIE_PORT2_DEVFN, {PIRQ_B, PIRQ_C, PIRQ_D, PIRQ_A}}, /* mPCIe J122: 15.1 */
+ {SB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* mPCIe J123: 15.2 */
+ {SB_PCIE_PORT4_DEVFN, {PIRQ_B, PIRQ_C, PIRQ_D, PIRQ_A}}, /* unused 15.3 */
+ {OHCI3_DEVFN, {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3: 16.0 (same device as xHCI 10.0) */
+ {EHCI3_DEVFN, {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3: 16.2 (same device as xHCI 10.1) */
+};
+
+/* PIRQ Setup */
+static void pirq_setup(void)
+{
+ pirq_data_ptr = mainboard_pirq_data;
+ pirq_data_size = FCH_INT_TABLE_SIZE /* FIXME sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct) */;
+ intr_data_ptr = mainboard_intr_data;
+ picr_data_ptr = mainboard_picr_data;
+}
+
+/*************************************************
+ * enable the dedicated function in lamar board.
+ *************************************************/
+static void mainboard_enable(device_t dev)
+{
+ printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+ /*
+ * The mainboard is the first place that we get control in ramstage. Check
+ * for S3 resume and call the approriate AGESA/CIMx resume functions.
+ */
+#if CONFIG_HAVE_ACPI_RESUME
+ acpi_slp_type = acpi_get_sleep_type();
+ if (acpi_slp_type == 3)
+ agesawrapper_fchs3earlyrestore();
+#endif
+
+ /* Initialize the PIRQ data structures for consumption */
+ pirq_setup();
+}
+
+struct chip_operations mainboard_ops = {
+ .enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/amd/lamar/mptable.c b/src/mainboard/amd/lamar/mptable.c
new file mode 100644
index 0000000..e4e0d17
--- /dev/null
+++ b/src/mainboard/amd/lamar/mptable.c
@@ -0,0 +1,170 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <string.h>
+#include <stdint.h>
+#include <cpu/amd/amdfam15.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <southbridge/amd/amd_pci_util.h>
+#include <drivers/generic/ioapic/chip.h>
+#include <arch/ioapic.h>
+#include <southbridge/amd/pi/hudson/amd_pci_int_defs.h>
+#include <southbridge/amd/pi/hudson/pci_devs.h>
+#include <northbridge/amd/pi/00630F01/pci_devs.h>
+
+extern u8 bus_sb[16];
+extern u32 bus_type[256];
+extern u32 sbdn_sb;
+extern u32 apicid_nb, apicid_sb;
+
+static void *smp_write_config_table(void *v)
+{
+ struct mp_config_table *mc;
+ int bus_isa;
+ u32 apicver_nb, apicver_sb;
+
+ /* Intialize the MP_Table */
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+
+ mptable_init(mc, LOCAL_APIC_ADDR);
+
+ /*
+ * Type 0: Processor Entries:
+ * LAPIC ID, LAPIC Version, CPU Flags:EN/BP,
+ * CPU Signature (Stepping, Model, Family),
+ * Feature Flags
+ */
+ smp_write_processors(mc);
+
+ /* Get Bus Configuration */
+ get_bus_conf();
+
+ /*
+ * Type 1: Bus Entries:
+ * Bus ID, Bus Type
+ */
+ mptable_write_buses(mc, NULL, &bus_isa);
+
+ /*
+ * Type 2: I/O APICs:
+ * APIC ID, Version, APIC Flags:EN, Address
+ */
+
+#define NB_APIC_ADDR 0xFEC20000
+
+ apicid_nb = (io_apic_read(NB_APIC_ADDR, 0x00) >> 24); /* Get the GNB IOAPIC ID */
+ apicver_nb = (io_apic_read(NB_APIC_ADDR, 0x01) & 0xFF); /* Get the GNB IOAPIC version */
+
+ smp_write_ioapic(mc, apicid_nb, apicver_nb, NB_APIC_ADDR);
+
+ apicid_sb = (io_apic_read(IO_APIC_ADDR, 0x00) >> 24); /* Get the southbridge IOAPIC ID */
+ apicver_sb = (io_apic_read(IO_APIC_ADDR, 0x01) & 0xFF); /* Get the southbridge IOAPIC version */
+
+ smp_write_ioapic(mc, apicid_sb, apicver_sb, IO_APIC_ADDR);
+
+ /*
+ * Type 3: I/O Interrupt Table Entries:
+ * Int Type, Int Polarity, Int Level, Source Bus ID,
+ * Source Bus IRQ, Dest APIC ID, Dest PIN#
+ */
+ mptable_add_isa_interrupts(mc, bus_isa, apicid_nb, 0);
+ mptable_add_isa_interrupts(mc, bus_isa, apicid_sb, 0);
+
+ /* PCI interrupts are level triggered, and are
+ * associated with a specific bus/device/function tuple.
+ */
+#define PCI_INT(bus, dev, fn, apic, pin) \
+ if (((pin) != 0x00) && ((pin) != 0x1F)) \
+ { \
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apic, (pin)); \
+ }
+
+ /* APU Internal Graphic Device */
+ PCI_INT(0x0, 0x01, 0x0, apicid_nb, intr_data_ptr[PIRQ_GFX]);
+ PCI_INT(0x0, 0x01, 0x1, apicid_nb, intr_data_ptr[PIRQ_ACTL]);
+
+ /* SMBUS / ACPI */
+ PCI_INT(0x0, 0x14, 0x0, apicid_sb, intr_data_ptr[PIRQ_SMBUS]);
+
+ /* Southbridge HD Audio */
+ PCI_INT(0x0, 0x14, 0x2, apicid_sb, intr_data_ptr[PIRQ_HDA]);
+
+ /* USB */
+ PCI_INT(0x0, 0x12, 0x0, apicid_sb, intr_data_ptr[PIRQ_OHCI1]);
+ PCI_INT(0x0, 0x12, 0x2, apicid_sb, intr_data_ptr[PIRQ_EHCI1]);
+ PCI_INT(0x0, 0x13, 0x0, apicid_sb, intr_data_ptr[PIRQ_OHCI2]);
+ PCI_INT(0x0, 0x13, 0x2, apicid_sb, intr_data_ptr[PIRQ_EHCI2]);
+ PCI_INT(0x0, 0x16, 0x0, apicid_sb, intr_data_ptr[PIRQ_OHCI3]);
+ PCI_INT(0x0, 0x16, 0x2, apicid_sb, intr_data_ptr[PIRQ_EHCI3]);
+ PCI_INT(0x0, 0x14, 0x5, apicid_sb, intr_data_ptr[PIRQ_OHCI4]);
+
+ /* SATA */
+ PCI_INT(0x0, 0x11, 0x0, apicid_sb, intr_data_ptr[PIRQ_SATA]);
+
+ /* IDE */
+ PCI_INT(0x0, 0x14, 0x1, apicid_sb, intr_data_ptr[PIRQ_IDE]);
+
+ /* PCI slots */
+ /* NB Gfx PCIe Bridges */
+ PCI_INT(0, 0x2, 0x1, apicid_nb, intr_data_ptr[PIRQ_A]);
+ PCI_INT(0, 0x2, 0x2, apicid_nb, intr_data_ptr[PIRQ_A]);
+
+ /* NB GPP PCIe Bridges */
+ PCI_INT(0, 0x3, 0x1, apicid_nb, intr_data_ptr[PIRQ_A]);
+ PCI_INT(0, 0x3, 0x2, apicid_nb, intr_data_ptr[PIRQ_A]);
+ PCI_INT(0, 0x3, 0x3, apicid_nb, intr_data_ptr[PIRQ_A]);
+ PCI_INT(0, 0x3, 0x4, apicid_nb, intr_data_ptr[PIRQ_A]);
+ PCI_INT(0, 0x3, 0x5, apicid_nb, intr_data_ptr[PIRQ_A]);
+
+ /* PCI slots */
+ PCI_INT(0, 0x14, 0x4, apicid_sb, intr_data_ptr[PIRQ_A]);
+
+ /* FCH GPP PCIe Bridges */
+ PCI_INT(0x0, 0x15, 0x0, apicid_sb, intr_data_ptr[PIRQ_A]);
+ /* FCH PCIe PortB */
+ PCI_INT(0x0, 0x15, 0x1, apicid_sb, intr_data_ptr[PIRQ_A]);
+ /* FCH PCIe PortC */
+ PCI_INT(0x0, 0x15, 0x2, apicid_sb, intr_data_ptr[PIRQ_A]);
+ /* FCH PCIe PortD */
+ PCI_INT(0x0, 0x15, 0x3, apicid_sb, intr_data_ptr[PIRQ_A]);
+
+ /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+ smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+
+ IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
+ IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
+
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ return mptable_finalize(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr, 0); /* ADDR, Enable Virtual Wire */
+ return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/amd/lamar/romstage.c b/src/mainboard/amd/lamar/romstage.c
new file mode 100644
index 0000000..04d7d9c
--- /dev/null
+++ b/src/mainboard/amd/lamar/romstage.c
@@ -0,0 +1,138 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <arch/stages.h>
+#include <device/pnp_def.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <console/console.h>
+#include <console/loglevel.h>
+#include <cpu/amd/car.h>
+#include <northbridge/amd/pi/agesawrapper.h>
+#include <northbridge/amd/pi/agesawrapper_call.h>
+#include <cpu/x86/bist.h>
+#include <cpu/x86/lapic.h>
+#include <southbridge/amd/pi/hudson/hudson.h>
+#include <cpu/amd/pi/s3_resume.h>
+#include "src/drivers/pc80/i8254.c"
+#include "src/drivers/pc80/i8259.c"
+#include "cbmem.h"
+#include "superio/fintek/f81216h/f81216h.h"
+
+#define SERIAL_DEV PNP_DEV(0x4e, F81216H_SP1)
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ u32 val;
+ AGESA_STATUS status = AGESA_UNSUPPORTED;
+
+ /*
+ * In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for
+ * LpcClk[1:0]". This following register setting has been
+ * replicated in every reference design since Parmer, so it is
+ * believed to be required even though it is not documented in
+ * the SoC BKDGs. Without this setting, there is no serial
+ * output.
+ */
+ outb(0xD2, 0xcd6);
+ outb(0x00, 0xcd7);
+
+ /*
+ * The following should be a call to AGESAWRAPPER() macro, but
+ * that would use console output before it is initialized.
+ */
+ status = agesawrapper_amdinitmmio();
+ if (AGESA_SUCCESS != status) {
+ printk(BIOS_WARNING, "AmdInitMmio reported %s\n", decodeAGESA_STATUS(status));
+ }
+
+ outb(0x24, 0xCD6);
+ outb(0x01, 0xCD7);
+ *(volatile u32 *) (0xFED80000 + 0xE00 + 0x28) |= 1 << 18; /* 24Mhz */
+ *(volatile u32 *) (0xFED80000 + 0xE00 + 0x40) &= ~(1 << 2); /* 24Mhz */
+ hudson_lpc_port80();
+
+ if (!cpu_init_detectedx) {
+ post_code(0x30);
+ f81216h_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE, MODE_7777);
+ post_code(0x31);
+ console_init();
+ }
+
+ /* Halt if there was a built in self test failure */
+ post_code(0x34);
+ report_bist_failure(bist);
+
+ /* Load MPB */
+ val = cpuid_eax(1);
+ printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
+ printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
+
+ post_code(0x37);
+ AGESAWRAPPER(amdinitreset);
+ post_code(0x38);
+ printk(BIOS_DEBUG, "Got past hudson_early_setup\n");
+
+ post_code(0x39);
+ AGESAWRAPPER(amdinitearly);
+ int s3resume = acpi_is_wakeup_s3();
+ if (!s3resume) {
+ post_code(0x40);
+ AGESAWRAPPER(amdinitpost);
+
+ post_code(0x41);
+ AGESAWRAPPER(amdinitenv);
+ /*
+ If code hangs here, please check cahaltasm.S
+ */
+ disable_cache_as_ram();
+ }
+#if CONFIG_HAVE_ACPI_RESUME
+ else { /* S3 detect */
+ printk(BIOS_INFO, "S3 detected\n");
+
+ post_code(0x60);
+ AGESAWRAPPER(amdinitresume);
+
+ AGESAWRAPPER(amds3laterestore);
+
+ post_code(0x61);
+ prepare_for_resume();
+ }
+#endif
+
+ /* Initialize i8259 pic */
+ post_code(0x41);
+ setup_i8259 ();
+
+ /* Initialize i8254 timers */
+ post_code(0x42);
+ setup_i8254 ();
+
+ post_code(0x50);
+ copy_and_run();
+
+ post_code(0x54); /* Should never see this post code. */
+}
More information about the coreboot-gerrit
mailing list