[coreboot-gerrit] Patch merged into coreboot/master: d6aaca9 pistachio: add DDR2 initialization code

[gerrit at coreboot.org]

the following patch was just integrated into master:
commit d6aaca95f6792a4fd2e33883e91d33b14d9562e6
Author: Ionela Voinescu <ionela.voinescu at imgtec.com>
Date:   Mon Jan 19 01:03:44 2015 +0000

    pistachio: add DDR2 initialization code
    
    This is the intialization code specific to the Winbond
    W972GG6JB-25 part using Synopsys DDR uMCTL and DDR Phy.
    
    This is DDR2 initialization code only (currently present
    on the bring up board). DDR3 initialization code will follow
    for boards having DDR3 memory.
    
    The programming procedure that is executed at power up to bring
    up the uMCTL, PHY and memories into a state where reads and
    writes to the memory can be performed is the following:
    
    1. uPCTL (Universal DDR protocol controller) initialization
       The timining registers TOGCNT1U, TINIT, TOGCNT100N and TRSTH
       needed for driving the memory power-up sequence are programmed
       as a function of the internal timers clock frequency.
       Organization (memory chip specific) values are set
       (column/bank/row address width and number of ranks), together
       with other static values (latency, timing, power up configuration).
       All these values are static, provided by the datasheet,
       being determined by the memory type, size and frequency.
    2. PHY initialization
       The PHY is programmed with datasheet provided values,
       specifying the initialization values for it to send to the
       external memory (timing parameters).
       Also, delay lines (DLL) and strength of drive pads are
       calibrated (based on external conditions: temperature,
       voltage, noise) and locked. After that, the PHY goes
       through a trainig process (also dependent on the
       current conditions at boot time) to establish precise
       timing configuration between the DDR clock and DQS (data strobe)
       and between DQS and DQ (data).
    3. Memory power up
    4. Switch from configuration state to access state.
    
    BUG=chrome-os-partner:31438, chrome-os-partner:37087
    TEST=tested on Pistachio bring up board -> DDR initialized
         properly and ramstage executed correctly
         DDR2 is also tested during chip sort.
         Corner cases (performace of DDR in different conditions)
         will be tested after the chip reaches a stable state.
    
    BRANCH=none
    
    Change-Id: I0093dc175d064aad03052d5281679b008c1bf012
    Signed-off-by: Patrick Georgi <pgeorgi at chromium.org>
    Original-Commit-Id: 3d0bacea0fd5bd3b12008b47e80de8398f447785
    Original-Change-Id: I8437db6c84d77c4c51a3ee2b09cd3d14913c0d16
    Original-Signed-off-by: Ionela Voinescu <ionela.voinescu at imgtec.com>
    Original-Reviewed-on: https://chromium-review.googlesource.com/241424
    Original-Reviewed-by: Vadim Bendebury <vbendeb at chromium.org>
    Original-Commit-Queue: Vadim Bendebury <vbendeb at chromium.org>
    Original-Tested-by: Vadim Bendebury <vbendeb at chromium.org>
    Reviewed-on: http://review.coreboot.org/9769
    Tested-by: build bot (Jenkins)
    Reviewed-by: Edward O'Callaghan <edward.ocallaghan at koparo.com>


See http://review.coreboot.org/9769 for details.

-gerrit