[coreboot-gerrit] New patch to review for coreboot: 6afbb60 Exynos5420: Fix up the i2c driver for use with the TPM driver
Isaac Christensen (isaac.christensen@se-eng.com)
gerrit at coreboot.org
Tue Sep 9 01:54:53 CEST 2014
Isaac Christensen (isaac.christensen at se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/6857
-gerrit
commit 6afbb600181131d341c3a0e86381ff369a5fff3d
Author: Gabe Black <gabeblack at google.com>
Date: Wed Nov 6 11:21:48 2013 -0800
Exynos5420: Fix up the i2c driver for use with the TPM driver
The TPM driver expects to call i2c_read with zero address length. The i2c
driver wasn't prepared to handle that particularly in the case of reads
because it expected to send an address before switching over to read mode for
the data. This change also fixes up the read and write calls to consistently
be read32 and write32 instead of readl and writel.
Change-Id: I33dee89b83d4cd9d3e1b90e84b40e761bb8d4de4
Signed-off-by: Gabe Black <gabeblack at google.com>
Reviewed-on: https://chromium-review.googlesource.com/175966
Reviewed-by: Stefan Reinauer <reinauer at chromium.org>
Tested-by: Stefan Reinauer <reinauer at chromium.org>
Commit-Queue: Gabe Black <gabeblack at chromium.org>
(cherry picked from commit cf686269424ea938d6f953d0f76103182eb71297)
Signed-off-by: Isaac Christensen <isaac.christensen at se-eng.com>
---
src/soc/samsung/exynos5420/i2c.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/src/soc/samsung/exynos5420/i2c.c b/src/soc/samsung/exynos5420/i2c.c
index 2268628..6ca0087 100644
--- a/src/soc/samsung/exynos5420/i2c.c
+++ b/src/soc/samsung/exynos5420/i2c.c
@@ -210,7 +210,7 @@ static int WaitForXfer(struct s3c24x0_i2c *i2c)
static void ReadWriteByte(struct s3c24x0_i2c *i2c)
{
- writel(read32(&i2c->iiccon) & ~I2CCON_IRPND, &i2c->iiccon);
+ write32(read32(&i2c->iiccon) & ~I2CCON_IRPND, &i2c->iiccon);
}
static void i2c_ch_init(struct s3c24x0_i2c_bus *bus, int speed, int slaveadd)
@@ -318,7 +318,7 @@ static void hsi2c_ch_init(struct s3c24x0_i2c_bus *i2c_bus,
write32(HSI2C_RXFIFO_EN | HSI2C_TXFIFO_EN, &hsregs->usi_fifo_ctl);
/* i2c_conf configure */
- write32(readl(&hsregs->usi_conf) | HSI2C_AUTO_MODE, &hsregs->usi_conf);
+ write32(read32(&hsregs->usi_conf) | HSI2C_AUTO_MODE, &hsregs->usi_conf);
}
/* SW reset for the high speed bus */
@@ -484,17 +484,19 @@ static int hsi2c_read(struct exynos5_hsi2c *i2c,
/* chip address */
write32(HSI2C_SLV_ADDR_MAS(chip), &i2c->i2c_addr);
- /* usi_ctl enable i2c func, master write configure */
- write32((HSI2C_TXCHON | HSI2C_FUNC_MODE_I2C | HSI2C_MASTER),
- &i2c->usi_ctl);
+ if (alen) {
+ /* usi_ctl enable i2c func, master write configure */
+ write32(HSI2C_TXCHON | HSI2C_FUNC_MODE_I2C | HSI2C_MASTER,
+ &i2c->usi_ctl);
- /* auto_conf */
- write32(alen | HSI2C_MASTER_RUN | HSI2C_STOP_AFTER_TRANS,
- &i2c->usi_auto_conf);
+ /* auto_conf */
+ write32(alen | HSI2C_MASTER_RUN | HSI2C_STOP_AFTER_TRANS,
+ &i2c->usi_auto_conf);
- if (hsi2c_senddata(i2c, addr, alen) ||
- hsi2c_wait_for_transfer(i2c) != 1) {
- return -1;
+ if (hsi2c_senddata(i2c, addr, alen) ||
+ hsi2c_wait_for_transfer(i2c) != 1) {
+ return -1;
+ }
}
/* usi_ctl enable i2c func, master WRITE configure */
@@ -542,7 +544,7 @@ static int i2c_transfer(struct s3c24x0_i2c *i2c,
timer_monotonic_get(¤t);
end = current;
mono_time_add_usecs(&end, I2C_TIMEOUT_MS * 1000);
- while (readl(&i2c->iicstat) & I2CSTAT_BSY) {
+ while (read32(&i2c->iicstat) & I2CSTAT_BSY) {
if (!mono_time_before(¤t, &end)){
printk(BIOS_ERR, "%s timed out\n", __func__);
return I2C_NOK_TOUT;
@@ -607,7 +609,7 @@ static int i2c_transfer(struct s3c24x0_i2c *i2c,
while ((i < data_len) && (result == I2C_OK)) {
/* disable ACK for final READ */
if (i == data_len - 1)
- write32(readl(&i2c->iiccon)
+ write32(read32(&i2c->iiccon)
& ~I2CCON_ACKGEN,
&i2c->iiccon);
ReadWriteByte(i2c);
More information about the coreboot-gerrit
mailing list