[coreboot-gerrit] Patch set updated for coreboot: 63d1bd2 hp/abm: Add new mainboard

Dave Frodin (dave.frodin@se-eng.com) gerrit at coreboot.org
Wed Jun 18 00:47:38 CEST 2014


Dave Frodin (dave.frodin at se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5948

-gerrit

commit 63d1bd2adb7feeb0ffa311582e440480b1cb848f
Author: Dave Frodin <dave.frodin at se-eng.com>
Date:   Thu Jun 5 11:49:04 2014 -0600

    hp/abm: Add new mainboard
    
    The hp/abm board is used in network/server applications.
    
    Notes:
    - The hp/abm board is headless and therefore does not define
      CONFIG_GFXUMA, and does not require a video bios.
    - The micro USB connector on the board edge is connected to COM4
      (i.e. I/O=2E8h). Coreboot needs to be configured to use Index=3.
    - If you are using SeaBIOS it would also need to be configured to
      use the UART at I/O=2E8h.
    - This board has been tested with headless installed versions of
      Ubuntu 12.10 and Fedora 19.
    
    Change-Id: I3cef44b4bfef093e1cb844a5406747f301fea387
    Signed-off-by: Dave Frodin <dave.frodin at se-eng.com>
---
 src/mainboard/hp/Kconfig                      |   3 +
 src/mainboard/hp/abm/BiosCallOuts.c           |  86 ++++
 src/mainboard/hp/abm/BiosCallOuts.h           |  31 ++
 src/mainboard/hp/abm/Kconfig                  |  79 +++
 src/mainboard/hp/abm/Makefile.inc             |  29 ++
 src/mainboard/hp/abm/OptionsIds.h             |  68 +++
 src/mainboard/hp/abm/PlatformGnbPcie.c        | 149 ++++++
 src/mainboard/hp/abm/PlatformGnbPcieComplex.h |  33 ++
 src/mainboard/hp/abm/acpi/AmdImc.asl          | 115 +++++
 src/mainboard/hp/abm/acpi/gpe.asl             |  78 +++
 src/mainboard/hp/abm/acpi/mainboard.asl       |  38 ++
 src/mainboard/hp/abm/acpi/routing.asl         | 198 ++++++++
 src/mainboard/hp/abm/acpi/sata.asl            | 151 ++++++
 src/mainboard/hp/abm/acpi/si.asl              |  27 ++
 src/mainboard/hp/abm/acpi/sleep.asl           |  92 ++++
 src/mainboard/hp/abm/acpi/superio.asl         |  20 +
 src/mainboard/hp/abm/acpi/thermal.asl         |  20 +
 src/mainboard/hp/abm/acpi/usb_oc.asl          | 132 +++++
 src/mainboard/hp/abm/acpi_tables.c            | 290 +++++++++++
 src/mainboard/hp/abm/agesawrapper.c           | 670 ++++++++++++++++++++++++++
 src/mainboard/hp/abm/agesawrapper.h           |  75 +++
 src/mainboard/hp/abm/buildOpts.c              | 516 ++++++++++++++++++++
 src/mainboard/hp/abm/cmos.layout              | 115 +++++
 src/mainboard/hp/abm/devicetree.cb            |  95 ++++
 src/mainboard/hp/abm/dsdt.asl                 |  91 ++++
 src/mainboard/hp/abm/get_bus_conf.c           | 153 ++++++
 src/mainboard/hp/abm/irq_tables.c             | 113 +++++
 src/mainboard/hp/abm/mainboard.c              | 136 ++++++
 src/mainboard/hp/abm/mptable.c                | 246 ++++++++++
 src/mainboard/hp/abm/romstage.c               | 186 +++++++
 30 files changed, 4035 insertions(+)

diff --git a/src/mainboard/hp/Kconfig b/src/mainboard/hp/Kconfig
index 4b391ad..3efd1dd 100644
--- a/src/mainboard/hp/Kconfig
+++ b/src/mainboard/hp/Kconfig
@@ -3,6 +3,8 @@ if VENDOR_HP
 choice
 	prompt "Mainboard model"
 
+config BOARD_HP_ABM
+	bool "ABM"
 config BOARD_HP_DL145_G1
 	bool "ProLiant DL145 G1"
 config BOARD_HP_DL145_G3
@@ -17,6 +19,7 @@ config BOARD_HP_PAVILION_M6_1035DX
 
 endchoice
 
+source "src/mainboard/hp/abm/Kconfig"
 source "src/mainboard/hp/dl145_g1/Kconfig"
 source "src/mainboard/hp/dl145_g3/Kconfig"
 source "src/mainboard/hp/dl165_g6_fam10/Kconfig"
diff --git a/src/mainboard/hp/abm/BiosCallOuts.c b/src/mainboard/hp/abm/BiosCallOuts.c
new file mode 100644
index 0000000..9bede8c
--- /dev/null
+++ b/src/mainboard/hp/abm/BiosCallOuts.c
@@ -0,0 +1,86 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "agesawrapper.h"
+#include "amdlib.h"
+#include "BiosCallOuts.h"
+#include "Ids.h"
+#include "OptionsIds.h"
+#include "heapManager.h"
+#include "FchPlatform.h"
+#include "cbfs.h"
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+#include "imc.h"
+#endif
+#include <stdlib.h>
+
+const BIOS_CALLOUT_STRUCT BiosCallouts[] =
+{
+	{AGESA_ALLOCATE_BUFFER,          agesa_AllocateBuffer },
+	{AGESA_DEALLOCATE_BUFFER,        agesa_DeallocateBuffer },
+	{AGESA_LOCATE_BUFFER,            agesa_LocateBuffer },
+	{AGESA_READ_SPD,                 fam16kb_ReadSpd },
+	{AGESA_DO_RESET,                 agesa_Reset },
+	{AGESA_READ_SPD_RECOVERY,        agesa_NoopUnsupported },
+	{AGESA_RUNFUNC_ONAP,             agesa_RunFuncOnAp },
+	{AGESA_GET_IDS_INIT_DATA,        agesa_EmptyIdsInitData },
+	{AGESA_HOOKBEFORE_DQS_TRAINING,  agesa_NoopSuccess },
+	{AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
+	{AGESA_FCH_OEM_CALLOUT,          Fch_Oem_config },
+	{AGESA_GNB_GFX_GET_VBIOS_IMAGE,  agesa_GfxGetVbiosImage }
+};
+const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
+
+/**
+ * Fch Oem setting callback
+ *
+ *  Configure platform specific Hudson device,
+ *   such Azalia, SATA, IMC etc.
+ */
+AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
+{
+	FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *)FchData;
+
+	if (FchParams->StdHeader->Func == AMD_INIT_RESET) {
+		//FCH_RESET_DATA_BLOCK *FchParams_reset =  (FCH_RESET_DATA_BLOCK *) FchData;
+		printk(BIOS_DEBUG, "Fch OEM config in INIT RESET ");
+		//FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */
+	} else if (FchParams->StdHeader->Func == AMD_INIT_ENV) {
+		FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData;
+		printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
+
+		/* Azalia Controller Front Panel OEM Table Pointer */
+
+		/* Fan Control */
+
+		/* XHCI configuration */
+#if IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE)
+		FchParams_env->Usb.Xhci0Enable = TRUE;
+#else
+		FchParams_env->Usb.Xhci0Enable = FALSE;
+#endif
+		FchParams_env->Usb.Xhci1Enable = FALSE;
+
+		/* sata configuration */
+	}
+	printk(BIOS_DEBUG, "Done\n");
+
+	return AGESA_SUCCESS;
+}
diff --git a/src/mainboard/hp/abm/BiosCallOuts.h b/src/mainboard/hp/abm/BiosCallOuts.h
new file mode 100644
index 0000000..fb893df
--- /dev/null
+++ b/src/mainboard/hp/abm/BiosCallOuts.h
@@ -0,0 +1,31 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BIOS_CALLOUT_H_
+#define _BIOS_CALLOUT_H_
+
+#include <northbridge/amd/agesa/def_callouts.h>
+#include <northbridge/amd/agesa/family16kb/fam16kb_callouts.h>
+
+
+/* FCH OEM Config*/
+AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr);
+
+#endif //_BIOS_CALLOUT_H_
diff --git a/src/mainboard/hp/abm/Kconfig b/src/mainboard/hp/abm/Kconfig
new file mode 100644
index 0000000..505beae
--- /dev/null
+++ b/src/mainboard/hp/abm/Kconfig
@@ -0,0 +1,79 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012-2014 Advanced Micro Devices, Inc.
+# Copyright (C) 2014 Sage Electronic Engineering, LLC
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+
+if BOARD_HP_ABM
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select CPU_AMD_AGESA_FAMILY16_KB
+	select NORTHBRIDGE_AMD_AGESA_FAMILY16_KB
+	select SOUTHBRIDGE_AMD_AGESA_YANGTZE
+	select SUPERIO_NUVOTON_NCT5104D
+	select HAVE_OPTION_TABLE
+	select HAVE_PIRQ_TABLE
+	select HAVE_MP_TABLE
+	select HAVE_ACPI_TABLES
+	select BOARD_ROMSIZE_KB_8192
+
+config MAINBOARD_DIR
+	string
+	default hp/abm
+
+config MAINBOARD_PART_NUMBER
+	string
+	default "ABM"
+
+config HW_MEM_HOLE_SIZEK
+	hex
+	default 0x200000
+
+config MAX_CPUS
+	int
+	default 4
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+	bool
+	default n
+
+config IRQ_SLOT_COUNT
+	int
+	default 11
+
+config RAMTOP
+	hex
+	default 0x1000000
+
+config HEAP_SIZE
+	hex
+	default 0xc0000
+
+config ACPI_SSDTX_NUM
+	int
+	default 0
+
+config RAMBASE
+	hex
+	default 0x200000
+
+config HUDSON_LEGACY_FREE
+	bool
+	default n
+
+endif # BOARD_HP_ABM
diff --git a/src/mainboard/hp/abm/Makefile.inc b/src/mainboard/hp/abm/Makefile.inc
new file mode 100644
index 0000000..bd2717f
--- /dev/null
+++ b/src/mainboard/hp/abm/Makefile.inc
@@ -0,0 +1,29 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+# Copyright (C) 2014 Sage Electronic Engineering, LLC
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#
+
+romstage-y += buildOpts.c
+romstage-y += agesawrapper.c
+romstage-y += BiosCallOuts.c
+romstage-y += PlatformGnbPcie.c
+
+ramstage-y += buildOpts.c
+ramstage-y += agesawrapper.c
+ramstage-y += BiosCallOuts.c
+ramstage-y += PlatformGnbPcie.c
diff --git a/src/mainboard/hp/abm/OptionsIds.h b/src/mainboard/hp/abm/OptionsIds.h
new file mode 100644
index 0000000..5880030
--- /dev/null
+++ b/src/mainboard/hp/abm/OptionsIds.h
@@ -0,0 +1,68 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/**
+ * @file
+ *
+ * IDS Option File
+ *
+ * This file is used to switch on/off IDS features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 12067 $   @e \$Date: 2009-04-11 04:34:13 +0800 (Sat, 11 Apr 2009) $
+ */
+#ifndef _OPTION_IDS_H_
+#define _OPTION_IDS_H_
+
+/**
+ *
+ *  This file generates the defaults tables for the Integrated Debug Support
+ * Module. The documented build options are imported from a user controlled
+ * file for processing. The build options for the Integrated Debug Support
+ * Module are listed below:
+ *
+ *    IDSOPT_IDS_ENABLED
+ *    IDSOPT_ERROR_TRAP_ENABLED
+ *    IDSOPT_CONTROL_ENABLED
+ *    IDSOPT_TRACING_ENABLED
+ *    IDSOPT_PERF_ANALYSIS
+ *    IDSOPT_ASSERT_ENABLED
+ *    IDS_DEBUG_PORT
+ *    IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+ *
+ **/
+
+#define IDSOPT_IDS_ENABLED     TRUE
+//#define IDSOPT_CONTROL_ENABLED TRUE
+//#define IDSOPT_TRACING_ENABLED TRUE
+#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE
+//#define IDSOPT_PERF_ANALYSIS   TRUE
+#define IDSOPT_ASSERT_ENABLED  TRUE
+//#undef IDSOPT_DEBUG_ENABLED
+//#define IDSOPT_DEBUG_ENABLED  FALSE
+//#undef IDSOPT_HOST_SIMNOW
+//#define IDSOPT_HOST_SIMNOW    FALSE
+//#undef IDSOPT_HOST_HDT
+//#define IDSOPT_HOST_HDT       FALSE
+//#define IDS_DEBUG_PORT    0x80
+
+#endif /* _OPTION_IDS_H_ */
diff --git a/src/mainboard/hp/abm/PlatformGnbPcie.c b/src/mainboard/hp/abm/PlatformGnbPcie.c
new file mode 100644
index 0000000..f2dc287
--- /dev/null
+++ b/src/mainboard/hp/abm/PlatformGnbPcie.c
@@ -0,0 +1,149 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "PlatformGnbPcieComplex.h"
+#include "Filecode.h"
+
+#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE
+
+static const PCIe_PORT_DESCRIPTOR PortList [] = {
+	{
+		0, //Descriptor flags  !!!IMPORTANT!!! Terminate last element of array
+		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 3, 3),
+		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 5,
+				HotplugDisabled,
+				PcieGenMaxSupported,
+				PcieGenMaxSupported,
+				AspmDisabled, 0x01, 0)
+	},
+	/* Initialize Port descriptor (PCIe port, Lanes 1, PCI Device Number 2, ...) */
+	{
+		0, //Descriptor flags  !!!IMPORTANT!!! Terminate last element of array
+		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 2, 2),
+		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 4,
+				HotplugDisabled,
+				PcieGenMaxSupported,
+				PcieGenMaxSupported,
+				AspmDisabled, 0x02, 0)
+	},
+	/* Initialize Port descriptor (PCIe port, Lanes 2, PCI Device Number 2, ...) */
+	{
+		0, //Descriptor flags  !!!IMPORTANT!!! Terminate last element of array
+		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 1, 1),
+		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 3,
+				HotplugDisabled,
+				PcieGenMaxSupported,
+				PcieGenMaxSupported,
+				AspmDisabled, 0x03, 0)
+	},
+	/* Initialize Port descriptor (PCIe port, Lanes 3, PCI Device Number 2, ...) */
+	{
+		0,
+		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 0),
+		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 2,
+				HotplugDisabled,
+				PcieGenMaxSupported,
+				PcieGenMaxSupported,
+				AspmDisabled, 0x04, 0)
+	},
+	/* Initialize Port descriptor (PCIe port, Lanes 4-7, PCI Device Number 4, ...) */
+	{
+		DESCRIPTOR_TERMINATE_LIST, //Descriptor flags  !!!IMPORTANT!!! Terminate last element of array
+		PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 7),
+		PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 1,
+				HotplugDisabled,
+				PcieGenMaxSupported,
+				PcieGenMaxSupported,
+				AspmDisabled, 0x05, 0)
+	}
+};
+
+static const PCIe_DDI_DESCRIPTOR DdiList [] = {
+	/* DP0 to HDMI0/DP */
+	{
+		0,
+		PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
+		PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux1, Hdp1)
+	},
+	/* DP1 to FCH */
+	{
+		DESCRIPTOR_TERMINATE_LIST,
+		PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
+		PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2)
+	},
+};
+
+static const PCIe_COMPLEX_DESCRIPTOR PcieComplex = {
+	.Flags        = DESCRIPTOR_TERMINATE_LIST,
+	.SocketId     = 0,
+	.PciePortList = PortList,
+	.DdiLinkList  = DdiList
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ *  OemCustomizeInitEarly
+ *
+ *  Description:
+ *    This is the stub function will call the host environment through the binary block
+ *    interface (call-out port) to provide a user hook opportunity
+ *
+ *  Parameters:
+ *    @param[in]      **PeiServices
+ *    @param[in]      *InitEarly
+ *
+ *    @retval         VOID
+ *
+ **/
+/*---------------------------------------------------------------------------------------*/
+VOID
+OemCustomizeInitEarly (
+	IN  OUT AMD_EARLY_PARAMS    *InitEarly
+	)
+{
+	AGESA_STATUS            Status;
+	PCIe_COMPLEX_DESCRIPTOR *PcieComplexListPtr;
+
+	ALLOCATE_HEAP_PARAMS AllocHeapParams;
+
+	/* GNB PCIe topology Porting */
+
+	/*  */
+	/* Allocate buffer for PCIe_COMPLEX_DESCRIPTOR , PCIe_PORT_DESCRIPTOR and PCIe_DDI_DESCRIPTOR */
+	/*  */
+	AllocHeapParams.RequestedBufferSize = sizeof(PcieComplex);
+
+	AllocHeapParams.BufferHandle = AMD_MEM_MISC_HANDLES_START;
+	AllocHeapParams.Persist = HEAP_LOCAL_CACHE;
+	Status = HeapAllocateBuffer (&AllocHeapParams, &InitEarly->StdHeader);
+	if ( Status!= AGESA_SUCCESS) {
+		/* Could not allocate buffer for PCIe_COMPLEX_DESCRIPTOR */
+		ASSERT(FALSE);
+		return;
+	}
+
+	PcieComplexListPtr  =  (PCIe_COMPLEX_DESCRIPTOR *) AllocHeapParams.BufferPtr;
+	LibAmdMemCopy  (PcieComplexListPtr, &PcieComplex, sizeof(PcieComplex), &InitEarly->StdHeader);
+	InitEarly->GnbConfig.PcieComplexList = PcieComplexListPtr;
+}
diff --git a/src/mainboard/hp/abm/PlatformGnbPcieComplex.h b/src/mainboard/hp/abm/PlatformGnbPcieComplex.h
new file mode 100644
index 0000000..f875e1b
--- /dev/null
+++ b/src/mainboard/hp/abm/PlatformGnbPcieComplex.h
@@ -0,0 +1,33 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H
+#define _PLATFORM_GNB_PCIE_COMPLEX_H
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "amdlib.h"
+
+VOID
+OemCustomizeInitEarly (
+  IN  OUT AMD_EARLY_PARAMS    *InitEarly
+  );
+
+#endif //_PLATFORM_GNB_PCIE_COMPLEX_H
diff --git a/src/mainboard/hp/abm/acpi/AmdImc.asl b/src/mainboard/hp/abm/acpi/AmdImc.asl
new file mode 100644
index 0000000..f664dc1
--- /dev/null
+++ b/src/mainboard/hp/abm/acpi/AmdImc.asl
@@ -0,0 +1,115 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+//BTDC Due to IMC Fan, ACPI control codes
+OperationRegion(IMIO, SystemIO, 0x3E, 0x02)
+Field(IMIO , ByteAcc, NoLock, Preserve) {
+	IMCX,8,
+	IMCA,8
+}
+
+IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) {
+	Offset(0x80),
+	MSTI, 8,
+	MITS, 8,
+	MRG0, 8,
+	MRG1, 8,
+	MRG2, 8,
+	MRG3, 8,
+}
+
+Method(WACK, 0)
+{
+	Store(0, Local0)
+	While (LNotEqual(Local0, 0xFA)) {
+		Store(MRG0, Local0)
+		Sleep(10)
+	}
+}
+
+//Init
+Method (ITZE, 0)
+{
+	Store(0, MRG0)
+	Store(0xB5, MRG1)
+	Store(0, MRG2)
+	Store(0x96, MSTI)
+	WACK()
+
+	Store(0, MRG0)
+	Store(0, MRG1)
+	Store(0, MRG2)
+	Store(0x80, MSTI)
+	WACK()
+
+	Or(MRG2, 0x01, Local0)
+
+	Store(0, MRG0)
+	Store(0, MRG1)
+	Store(Local0, MRG2)
+	Store(0x81, MSTI)
+	WACK()
+}
+
+//Sleep
+Method (IMSP, 0)
+{
+	Store(0, MRG0)
+	Store(0xB5, MRG1)
+	Store(0, MRG2)
+	Store(0x96, MSTI)
+	WACK()
+
+	Store(0, MRG0)
+	Store(1, MRG1)
+	Store(0, MRG2)
+	Store(0x98, MSTI)
+	WACK()
+
+	Store(0, MRG0)
+	Store(0xB4, MRG1)
+	Store(0, MRG2)
+	Store(0x96, MSTI)
+	WACK()
+}
+
+//Wake
+Method (IMWK, 0)
+{
+	Store(0, MRG0)
+	Store(0xB5, MRG1)
+	Store(0, MRG2)
+	Store(0x96, MSTI)
+	WACK()
+
+	Store(0, MRG0)
+	Store(0, MRG1)
+	Store(0, MRG2)
+	Store(0x80, MSTI)
+	WACK()
+
+	Or(MRG2, 0x01, Local0)
+
+	Store(0, MRG0)
+	Store(0, MRG1)
+	Store(Local0, MRG2)
+	Store(0x81, MSTI)
+	WACK()
+}
diff --git a/src/mainboard/hp/abm/acpi/gpe.asl b/src/mainboard/hp/abm/acpi/gpe.asl
new file mode 100644
index 0000000..338d942
--- /dev/null
+++ b/src/mainboard/hp/abm/acpi/gpe.asl
@@ -0,0 +1,78 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+Scope(\_GPE) {	/* Start Scope GPE */
+
+	/*  General event 3  */
+	Method(_L03) {
+		/* DBGO("\\_GPE\\_L00\n") */
+		Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+	}
+
+	/*  Legacy PM event  */
+	Method(_L08) {
+		/* DBGO("\\_GPE\\_L08\n") */
+	}
+
+	/*  Temp warning (TWarn) event  */
+	Method(_L09) {
+		/* DBGO("\\_GPE\\_L09\n") */
+		/* Notify (\_TZ.TZ00, 0x80) */
+	}
+
+	/*  USB controller PME#  */
+	Method(_L0B) {
+		/* DBGO("\\_GPE\\_L0B\n") */
+		Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.XHC0, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+	}
+
+	/*  ExtEvent0 SCI event  */
+	Method(_L10) {
+		/* DBGO("\\_GPE\\_L10\n") */
+	}
+
+	/*  ExtEvent1 SCI event  */
+	Method(_L11) {
+		/* DBGO("\\_GPE\\_L11\n") */
+	}
+
+	/*  GPIO0 or GEvent8 event  */
+	Method(_L18) {
+		/* DBGO("\\_GPE\\_L18\n") */
+		Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.PBR5, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.PBR6, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PCI0.PBR7, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+	}
+
+	/*  Azalia SCI event  */
+	Method(_L1B) {
+		/* DBGO("\\_GPE\\_L1B\n") */
+		Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+		Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+	}
+} 	/* End Scope GPE */
diff --git a/src/mainboard/hp/abm/acpi/mainboard.asl b/src/mainboard/hp/abm/acpi/mainboard.asl
new file mode 100644
index 0000000..ca3fd6e
--- /dev/null
+++ b/src/mainboard/hp/abm/acpi/mainboard.asl
@@ -0,0 +1,38 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Memory related values */
+Name(LOMH, 0x0)	/* Start of unused memory in C0000-E0000 range */
+Name(PBAD, 0x0)	/* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+Name(PBLN, 0x0)	/* Length of BIOS area */
+
+Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS)	/* Base address of PCIe config space */
+Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */
+Name(HPBA, 0xFED00000)	/* Base address of HPET table */
+
+Name(SSFG, 0x0D)		/* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+/* Some global data */
+Name(OSVR, 3)	/* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+Name(OSV, Ones)	/* Assume nothing */
+Name(PMOD, One)	/* Assume APIC */
+
+/* AcpiGpe0Blk */
+OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04)
+	Field(GP0B, ByteAcc, NoLock, Preserve) { , 11, USBS, 1, }
diff --git a/src/mainboard/hp/abm/acpi/routing.asl b/src/mainboard/hp/abm/acpi/routing.asl
new file mode 100644
index 0000000..f8b7f96
--- /dev/null
+++ b/src/mainboard/hp/abm/acpi/routing.asl
@@ -0,0 +1,198 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+		)
+	{
+		#include "routing.asl"
+	}
+*/
+
+/* Routing is in System Bus scope */
+Name(PR0, Package(){
+	/* NB devices */
+	/* Bus 0, Dev 0 - F16 Host Controller */
+
+	/* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+	/* Bus 0, Dev 1, Func 1 - HDMI Audio Controller */
+	Package(){0x0001FFFF, 0, INTB, 0 },
+	Package(){0x0001FFFF, 1, INTC, 0 },
+
+
+	/* Bus 0, Dev 2 Func 0,1,2,3,4,5 - PCIe Bridges */
+	Package(){0x0002FFFF, 0, INTC, 0 },
+	Package(){0x0002FFFF, 1, INTD, 0 },
+	Package(){0x0002FFFF, 2, INTA, 0 },
+	Package(){0x0002FFFF, 3, INTB, 0 },
+
+	/* FCH devices */
+	/* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */
+	Package(){0x0014FFFF, 0, INTA, 0 },
+	Package(){0x0014FFFF, 1, INTB, 0 },
+	Package(){0x0014FFFF, 2, INTC, 0 },
+	Package(){0x0014FFFF, 3, INTD, 0 },
+
+	/* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */
+	/* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */
+	Package(){0x0012FFFF, 0, INTC, 0 },
+	Package(){0x0012FFFF, 1, INTB, 0 },
+
+	Package(){0x0013FFFF, 0, INTC, 0 },
+	Package(){0x0013FFFF, 1, INTB, 0 },
+
+	Package(){0x0016FFFF, 0, INTC, 0 },
+	Package(){0x0016FFFF, 1, INTB, 0 },
+
+	/* Bus 0, Dev 10 - USB: XHCI func 0, 1 */
+	Package(){0x0010FFFF, 0, INTC, 0 },
+	Package(){0x0010FFFF, 1, INTB, 0 },
+
+	/* Bus 0, Dev 17 - SATA controller */
+	Package(){0x0011FFFF, 0, INTD, 0 },
+
+})
+
+Name(APR0, Package(){
+	/* NB devices in APIC mode */
+	/* Bus 0, Dev 0 - F15 Host Controller */
+
+	/* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+	Package(){0x0001FFFF, 0, 0, 44 },
+	Package(){0x0001FFFF, 1, 0, 45 },
+
+	/* Bus 0, Dev 2 - PCIe Bridges  */
+	Package(){0x0002FFFF, 0, 0, 18 },
+	Package(){0x0002FFFF, 1, 0, 19 },
+	Package(){0x0002FFFF, 2, 0, 16 },
+	Package(){0x0002FFFF, 3, 0, 17 },
+
+
+	/* SB devices in APIC mode */
+	/* Bus 0, Dev 20 - F0:SMBus/ACPI,F2:HDAudio;F3:LPC;F7:SD */
+	Package(){0x0014FFFF, 0, 0, 16 },
+	Package(){0x0014FFFF, 1, 0, 17 },
+	Package(){0x0014FFFF, 2, 0, 18 },
+	Package(){0x0014FFFF, 3, 0, 19 },
+
+	/* Bus 0, Dev 18, 19, 22 Func 0 - USB: OHCI */
+	/* Bus 0, Dev 18, 19, 22 Func 1 - USB: EHCI */
+	Package(){0x0012FFFF, 0, 0, 18 },
+	Package(){0x0012FFFF, 1, 0, 17 },
+
+	Package(){0x0013FFFF, 0, 0, 18 },
+	Package(){0x0013FFFF, 1, 0, 17 },
+
+	Package(){0x0016FFFF, 0, 0, 18 },
+	Package(){0x0016FFFF, 1, 0, 17 },
+
+	/* Bus 0, Dev 10 - USB: XHCI func 0, 1 */
+	Package(){0x0010FFFF, 0, 0, 0x12},
+	Package(){0x0010FFFF, 1, 0, 0x11},
+
+	/* Bus 0, Dev 17 - SATA controller */
+	Package(){0x0011FFFF, 0, 0, 19 },
+
+})
+
+Name(PS2, Package(){
+	Package(){0x0000FFFF, 0, INTC, 0 },
+	Package(){0x0000FFFF, 1, INTD, 0 },
+	Package(){0x0000FFFF, 2, INTA, 0 },
+	Package(){0x0000FFFF, 3, INTB, 0 },
+})
+Name(APS2, Package(){
+	Package(){0x0000FFFF, 0, 0, 18 },
+	Package(){0x0000FFFF, 1, 0, 19 },
+	Package(){0x0000FFFF, 2, 0, 16 },
+	Package(){0x0000FFFF, 3, 0, 17 },
+})
+
+/* GFX */
+Name(PS4, Package(){
+	Package(){0x0000FFFF, 0, INTA, 0 },
+	Package(){0x0000FFFF, 1, INTB, 0 },
+	Package(){0x0000FFFF, 2, INTC, 0 },
+	Package(){0x0000FFFF, 3, INTD, 0 },
+})
+Name(APS4, Package(){
+	/* PCIe slot - Hooked to PCIe slot 4 */
+	Package(){0x0000FFFF, 0, 0, 16 },
+	Package(){0x0000FFFF, 1, 0, 17 },
+	Package(){0x0000FFFF, 2, 0, 18 },
+	Package(){0x0000FFFF, 3, 0, 19 },
+})
+
+/* GPP 0 */
+Name(PS5, Package(){
+	Package(){0x0000FFFF, 0, INTB, 0 },
+	Package(){0x0000FFFF, 1, INTC, 0 },
+	Package(){0x0000FFFF, 2, INTD, 0 },
+	Package(){0x0000FFFF, 3, INTA, 0 },
+})
+Name(APS5, Package(){
+	Package(){0x0000FFFF, 0, 0, 17 },
+	Package(){0x0000FFFF, 1, 0, 18 },
+	Package(){0x0000FFFF, 2, 0, 19 },
+	Package(){0x0000FFFF, 3, 0, 16 },
+})
+
+/* GPP 1 */
+Name(PS6, Package(){
+	Package(){0x0000FFFF, 0, INTC, 0 },
+	Package(){0x0000FFFF, 1, INTD, 0 },
+	Package(){0x0000FFFF, 2, INTA, 0 },
+	Package(){0x0000FFFF, 3, INTB, 0 },
+})
+Name(APS6, Package(){
+	Package(){0x0000FFFF, 0, 0, 18 },
+	Package(){0x0000FFFF, 1, 0, 19 },
+	Package(){0x0000FFFF, 2, 0, 16 },
+	Package(){0x0000FFFF, 3, 0, 17 },
+})
+
+/* GPP 2 */
+Name(PS7, Package(){
+	Package(){0x0000FFFF, 0, INTD, 0 },
+	Package(){0x0000FFFF, 1, INTA, 0 },
+	Package(){0x0000FFFF, 2, INTB, 0 },
+	Package(){0x0000FFFF, 3, INTC, 0 },
+})
+Name(APS7, Package(){
+	Package(){0x0000FFFF, 0, 0, 19 },
+	Package(){0x0000FFFF, 1, 0, 16 },
+	Package(){0x0000FFFF, 2, 0, 17 },
+	Package(){0x0000FFFF, 3, 0, 18 },
+})
+
+/* GPP 3 */
+Name(PS8, Package(){
+	Package(){0x0000FFFF, 0, INTA, 0 },
+	Package(){0x0000FFFF, 1, INTB, 0 },
+	Package(){0x0000FFFF, 2, INTC, 0 },
+	Package(){0x0000FFFF, 3, INTD, 0 },
+})
+Name(APS8, Package(){
+	Package(){0x0000FFFF, 0, 0, 16 },
+	Package(){0x0000FFFF, 1, 0, 17 },
+	Package(){0x0000FFFF, 2, 0, 18 },
+	Package(){0x0000FFFF, 3, 0, 18 },
+})
+
diff --git a/src/mainboard/hp/abm/acpi/sata.asl b/src/mainboard/hp/abm/acpi/sata.asl
new file mode 100644
index 0000000..db349e1
--- /dev/null
+++ b/src/mainboard/hp/abm/acpi/sata.asl
@@ -0,0 +1,151 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012-2013 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* No SATA functionality */
+
+#if 0
+/*
+Scope (_SB) {
+	Device(PCI0) {
+		Device(SATA) {
+			Name(_ADR, 0x00110000)
+			#include "sata.asl"
+		}
+	}
+}
+*/
+
+Name(STTM, Buffer(20) {
+	0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+	0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
+	0x1f, 0x00, 0x00, 0x00
+})
+
+/* Start by clearing the PhyRdyChg bits */
+Method(_INI) {
+	\_GPE._L1F()
+}
+
+Device(PMRY)
+{
+	Name(_ADR, 0)
+	Method(_GTM, 0x0, NotSerialized) {
+		Return(STTM)
+	}
+	Method(_STM, 0x3, NotSerialized) {}
+
+	Device(PMST) {
+		Name(_ADR, 0)
+		Method(_STA,0) {
+			if (LGreater(P0IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return  (0x00) /* sata is missing */
+			}
+		}
+	}/* end of PMST */
+
+	Device(PSLA)
+	{
+		Name(_ADR, 1)
+		Method(_STA,0) {
+			if (LGreater(P1IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	}	/* end of PSLA */
+}   /* end of PMRY */
+
+Device(SEDY)
+{
+	Name(_ADR, 1)		/* IDE Scondary Channel */
+	Method(_GTM, 0x0, NotSerialized) {
+		Return(STTM)
+	}
+	Method(_STM, 0x3, NotSerialized) {}
+
+	Device(SMST)
+	{
+		Name(_ADR, 0)
+		Method(_STA,0) {
+			if (LGreater(P2IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	} /* end of SMST */
+
+	Device(SSLA)
+	{
+		Name(_ADR, 1)
+		Method(_STA,0) {
+			if (LGreater(P3IS,0)) {
+				return (0x0F) /* sata is visible */
+			}
+			else {
+				return (0x00) /* sata is missing */
+			}
+		}
+	} /* end of SSLA */
+}   /* end of SEDY */
+
+/* SATA Hot Plug Support */
+Scope(\_GPE) {
+	Method(_L1F,0x0,NotSerialized) {
+		if (\_SB.P0PR) {
+			if (LGreater(\_SB.P0IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P0PR)
+		}
+
+		if (\_SB.P1PR) {
+			if (LGreater(\_SB.P1IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P1PR)
+		}
+
+		if (\_SB.P2PR) {
+			if (LGreater(\_SB.P2IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P2PR)
+		}
+
+		if (\_SB.P3PR) {
+			if (LGreater(\_SB.P3IS,0)) {
+				sleep(32)
+			}
+			Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
+			store(one, \_SB.P3PR)
+		}
+	}
+}
+#endif
diff --git a/src/mainboard/hp/abm/acpi/si.asl b/src/mainboard/hp/abm/acpi/si.asl
new file mode 100644
index 0000000..ea6e3b1
--- /dev/null
+++ b/src/mainboard/hp/abm/acpi/si.asl
@@ -0,0 +1,27 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+Scope(\_SI) {
+	Method(_SST, 1) {
+		/* DBGO("\\_SI\\_SST\n") */
+		/* DBGO("   New Indicator state: ") */
+		/* DBGO(Arg0) */
+		/* DBGO("\n") */
+	}
+} /* End Scope SI */
diff --git a/src/mainboard/hp/abm/acpi/sleep.asl b/src/mainboard/hp/abm/acpi/sleep.asl
new file mode 100644
index 0000000..0e315f4
--- /dev/null
+++ b/src/mainboard/hp/abm/acpi/sleep.asl
@@ -0,0 +1,92 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Wake status package */
+Name(WKST,Package(){Zero, Zero})
+
+/*
+* \_PTS - Prepare to Sleep method
+*
+*	Entry:
+*		Arg0=The value of the sleeping state S1=1, S2=2, etc
+*
+* Exit:
+*		-none-
+*
+* The _PTS control method is executed at the beginning of the sleep process
+* for S1-S5. The sleeping value is passed to the _PTS control method.	This
+* control method may be executed a relatively long time before entering the
+* sleep state and the OS may abort	the operation without notification to
+* the ACPI driver.  This method cannot modify the configuration or power
+* state of any device in the system.
+*/
+Method(_PTS, 1) {
+	/* DBGO("\\_PTS\n") */
+	/* DBGO("From S0 to S") */
+	/* DBGO(Arg0) */
+	/* DBGO("\n") */
+
+	/* Clear wake status structure. */
+	Store(0, Index(WKST,0))
+	Store(0, Index(WKST,1))
+	Store(7, UPWS)
+} /* End Method(\_PTS) */
+
+/*
+*	\_BFS OEM Back From Sleep method
+*
+*	Entry:
+*		Arg0=The value of the sleeping state S1=1, S2=2
+*
+*	Exit:
+*		-none-
+*/
+Method(\_BFS, 1) {
+	/* DBGO("\\_BFS\n") */
+	/* DBGO("From S") */
+	/* DBGO(Arg0) */
+	/* DBGO(" to S0\n") */
+}
+
+/*
+*  \_WAK System Wake method
+*
+*	Entry:
+*		Arg0=The value of the sleeping state S1=1, S2=2
+*
+*	Exit:
+*		Return package of 2 DWords
+*		Dword 1 - Status
+*			0x00000000	wake succeeded
+*			0x00000001	Wake was signaled but failed due to lack of power
+*			0x00000002	Wake was signaled but failed due to thermal condition
+*		Dword 2 - Power Supply state
+*			if non-zero the effective S-state the power supply entered
+*/
+Method(\_WAK, 1) {
+	/* DBGO("\\_WAK\n") */
+	/* DBGO("From S") */
+	/* DBGO(Arg0) */
+	/* DBGO(" to S0\n") */
+
+	/* clear USB wake up signal */
+	Store(1, USBS)
+
+	Return(WKST)
+} /* End Method(\_WAK) */
diff --git a/src/mainboard/hp/abm/acpi/superio.asl b/src/mainboard/hp/abm/acpi/superio.asl
new file mode 100755
index 0000000..60443e2
--- /dev/null
+++ b/src/mainboard/hp/abm/acpi/superio.asl
@@ -0,0 +1,20 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* No Super I/O device or functionality yet */
diff --git a/src/mainboard/hp/abm/acpi/thermal.asl b/src/mainboard/hp/abm/acpi/thermal.asl
new file mode 100755
index 0000000..13d6ed1
--- /dev/null
+++ b/src/mainboard/hp/abm/acpi/thermal.asl
@@ -0,0 +1,20 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* No thermal zone functionality */
diff --git a/src/mainboard/hp/abm/acpi/usb_oc.asl b/src/mainboard/hp/abm/acpi/usb_oc.asl
new file mode 100644
index 0000000..c7b770d
--- /dev/null
+++ b/src/mainboard/hp/abm/acpi/usb_oc.asl
@@ -0,0 +1,132 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* simple name description */
+/*
+DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
+		)
+	{
+		#include "usb.asl"
+	}
+*/
+
+/* USB overcurrent mapping pins.   */
+Name(UOM0, 0)
+Name(UOM1, 2)
+Name(UOM2, 0)
+Name(UOM3, 7)
+Name(UOM4, 2)
+Name(UOM5, 2)
+Name(UOM6, 6)
+Name(UOM7, 2)
+Name(UOM8, 6)
+Name(UOM9, 6)
+
+/* USB Overcurrent GPEs */
+
+#if 0 /* TODO: Update */
+Method(UCOC, 0) {
+	Sleep(20)
+	Store(0x13,CMTI)
+	Store(0,GPSL)
+}
+
+/* USB Port 0 overcurrent uses Gpm 0 */
+If(LLessEqual(UOM0,9)) {
+	Scope (\_GPE) {
+		Method (_L13) {
+		}
+	}
+}
+
+/* USB Port 1 overcurrent uses Gpm 1 */
+If (LLessEqual(UOM1,9)) {
+	Scope (\_GPE) {
+		Method (_L14) {
+		}
+	}
+}
+
+/* USB Port 2 overcurrent uses Gpm 2 */
+If (LLessEqual(UOM2,9)) {
+	Scope (\_GPE) {
+		Method (_L15) {
+		}
+	}
+}
+
+/* USB Port 3 overcurrent uses Gpm 3 */
+If (LLessEqual(UOM3,9)) {
+	Scope (\_GPE) {
+		Method (_L16) {
+		}
+	}
+}
+
+/* USB Port 4 overcurrent uses Gpm 4 */
+If (LLessEqual(UOM4,9)) {
+	Scope (\_GPE) {
+		Method (_L19) {
+		}
+	}
+}
+
+/* USB Port 5 overcurrent uses Gpm 5 */
+If (LLessEqual(UOM5,9)) {
+	Scope (\_GPE) {
+		Method (_L1A) {
+		}
+	}
+}
+
+/* USB Port 6 overcurrent uses Gpm 6 */
+If (LLessEqual(UOM6,9)) {
+	Scope (\_GPE) {
+		/* Method (_L1C) { */
+		Method (_L06) {
+		}
+	}
+}
+
+/* USB Port 7 overcurrent uses Gpm 7 */
+If (LLessEqual(UOM7,9)) {
+	Scope (\_GPE) {
+		/* Method (_L1D) { */
+		Method (_L07) {
+		}
+	}
+}
+
+/* USB Port 8 overcurrent uses Gpm 8 */
+If (LLessEqual(UOM8,9)) {
+	Scope (\_GPE) {
+		Method (_L17) {
+		}
+	}
+}
+
+/* USB Port 9 overcurrent uses Gpm 9 */
+If (LLessEqual(UOM9,9)) {
+	Scope (\_GPE) {
+		Method (_L0E) {
+		}
+	}
+}
+#endif
diff --git a/src/mainboard/hp/abm/acpi_tables.c b/src/mainboard/hp/abm/acpi_tables.c
new file mode 100644
index 0000000..ea3ed5a
--- /dev/null
+++ b/src/mainboard/hp/abm/acpi_tables.c
@@ -0,0 +1,290 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/ioapic.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include "agesawrapper.h"
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam16.h>
+
+#include "agesawrapper.h"
+
+extern const unsigned char AmlCode[];
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+	/* Just a dummy */
+	return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+	/* create all subtables for processors */
+	current = acpi_create_madt_lapics(current);
+
+	/* Write SB800 IOAPIC, only one */
+	current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS,
+					   IO_APIC_ADDR, 0);
+
+	/* TODO: Remove the hardcode */
+	current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1,
+					   0xFEC20000, 24);
+
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+						current, 0, 0, 2, 0);
+	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+						current, 0, 9, 9, 0xF);
+	/* 0: mean bus 0--->ISA */
+	/* 0: PIC 0 */
+	/* 2: APIC 2 */
+	/* 5 mean: 0101 --> Edige-triggered, Active high */
+
+	/* create all subtables for processors */
+	current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1);
+	/* 1: LINT1 connect to NMI */
+
+	return current;
+}
+
+unsigned long acpi_fill_hest(acpi_hest_t *hest)
+{
+	void *addr, *current;
+
+	/* Skip the HEST header. */
+	current = (void *)(hest + 1);
+
+	addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE);
+	if (addr != NULL)
+		current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2);
+
+	addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC);
+	if (addr != NULL)
+		current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2);
+
+	return (unsigned long)current;
+}
+
+unsigned long acpi_fill_slit(unsigned long current)
+{
+	/* Not implemented */
+	return current;
+}
+
+unsigned long acpi_fill_srat(unsigned long current)
+{
+	/* No NUMA, no SRAT */
+	return current;
+}
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id)
+{
+	int lens;
+	msr_t msr;
+	char pscope[] = "\\_SB.PCI0";
+
+	lens = acpigen_write_scope(pscope);
+	msr = rdmsr(TOP_MEM);
+	lens += acpigen_write_name_dword("TOM1", msr.lo);
+	msr = rdmsr(TOP_MEM2);
+	/*
+	 * Since XP only implements parts of ACPI 2.0, we can't use a qword
+	 * here.
+	 * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt
+	 * slide 22ff.
+	 * Shift value right by 20 bit to make it fit into 32bit,
+	 * giving us 1MB granularity and a limit of almost 4Exabyte of memory.
+	 */
+	lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20);
+	acpigen_patch_len(lens - 1);
+	return (unsigned long) (acpigen_get_current());
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+	unsigned long current;
+	acpi_rsdp_t *rsdp;
+	acpi_rsdt_t *rsdt;
+	acpi_hpet_t *hpet;
+	acpi_madt_t *madt;
+	acpi_srat_t *srat;
+	acpi_slit_t *slit;
+	acpi_fadt_t *fadt;
+	acpi_facs_t *facs;
+	acpi_header_t *dsdt;
+	acpi_header_t *ssdt;
+	acpi_header_t *alib;
+	acpi_header_t *ivrs;
+	acpi_hest_t *hest;
+
+	get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */
+
+	/* Align ACPI tables to 16 bytes */
+	start = ALIGN(start, 16);
+	current = start;
+
+	printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
+
+	/* We need at least an RSDP and an RSDT Table */
+	rsdp = (acpi_rsdp_t *) current;
+	current += sizeof(acpi_rsdp_t);
+	rsdt = (acpi_rsdt_t *) current;
+	current += sizeof(acpi_rsdt_t);
+
+	/* clear all table memory */
+	memset((void *)start, 0, current - start);
+
+	acpi_write_rsdp(rsdp, rsdt, NULL);
+	acpi_write_rsdt(rsdt);
+
+	/* DSDT */
+	current = ALIGN(current, 8);
+	printk(BIOS_DEBUG, "ACPI:    * DSDT at %lx\n", current);
+	dsdt = (acpi_header_t *)current; /* it will used by fadt */
+	memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
+	current += dsdt->length;
+	memcpy(dsdt, &AmlCode, dsdt->length);
+	printk(BIOS_DEBUG, "ACPI:    * DSDT @ %p Length %x\n",dsdt,dsdt->length);
+
+	/* FACS */ /* it needs 64 bit alignment */
+	current = ALIGN(current, 8);
+	printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current);
+	facs = (acpi_facs_t *) current; /* it will be used by fadt */
+	current += sizeof(acpi_facs_t);
+	acpi_create_facs(facs);
+
+	/* FADT */
+	current = ALIGN(current, 8);
+	printk(BIOS_DEBUG, "ACPI:  * FADT at %lx\n", current);
+	fadt = (acpi_fadt_t *) current;
+	current += sizeof(acpi_fadt_t);
+
+	acpi_create_fadt(fadt, facs, dsdt);
+	acpi_add_table(rsdp, fadt);
+
+	/*
+	 * We explicitly add these tables later on:
+	 */
+	current = ALIGN(current, 8);
+	printk(BIOS_DEBUG, "ACPI:  * HPET at %lx\n", current);
+	hpet = (acpi_hpet_t *) current;
+	current += sizeof(acpi_hpet_t);
+	acpi_create_hpet(hpet);
+	acpi_add_table(rsdp, hpet);
+
+	/* If we want to use HPET Timers Linux wants an MADT */
+	current = ALIGN(current, 8);
+	printk(BIOS_DEBUG, "ACPI:  * MADT at %lx\n",current);
+	madt = (acpi_madt_t *) current;
+	acpi_create_madt(madt);
+	current += madt->header.length;
+	acpi_add_table(rsdp, madt);
+
+	/* HEST */
+	current = ALIGN(current, 8);
+	hest = (acpi_hest_t *)current;
+	acpi_write_hest((void *)current);
+	acpi_add_table(rsdp, (void *)current);
+	current += ((acpi_header_t *)current)->length;
+
+	current   = ALIGN(current, 8);
+	printk(BIOS_DEBUG, "ACPI:    * IVRS at %lx\n", current);
+	ivrs = agesawrapper_getlateinitptr(PICK_IVRS);
+	if (ivrs != NULL) {
+		memcpy((void *)current, ivrs, ivrs->length);
+		ivrs = (acpi_header_t *) current;
+		current += ivrs->length;
+		acpi_add_table(rsdp, ivrs);
+	} else {
+		printk(BIOS_DEBUG, "  AGESA IVRS table NULL. Skipping.\n");
+	}
+
+	/* SRAT */
+	current = ALIGN(current, 8);
+	printk(BIOS_DEBUG, "ACPI:    * SRAT at %lx\n", current);
+	srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT);
+	if (srat != NULL) {
+		memcpy((void *)current, srat, srat->header.length);
+		srat = (acpi_srat_t *) current;
+		current += srat->header.length;
+		acpi_add_table(rsdp, srat);
+	} else {
+		printk(BIOS_DEBUG, "  AGESA SRAT table NULL. Skipping.\n");
+	}
+
+	/* SLIT */
+	current = ALIGN(current, 8);
+	printk(BIOS_DEBUG, "ACPI:   * SLIT at %lx\n", current);
+	slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT);
+	if (slit != NULL) {
+		memcpy((void *)current, slit, slit->header.length);
+		slit = (acpi_slit_t *) current;
+		current += slit->header.length;
+		acpi_add_table(rsdp, slit);
+	} else {
+		printk(BIOS_DEBUG, "  AGESA SLIT table NULL. Skipping.\n");
+	}
+
+	/* ALIB */
+	current = ALIGN(current, 16);
+	printk(BIOS_DEBUG, "ACPI:  * AGESA ALIB SSDT at %lx\n", current);
+	alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB);
+	if (alib != NULL) {
+		memcpy((void *)current, alib, alib->length);
+		alib = (acpi_header_t *) current;
+		current += alib->length;
+		acpi_add_table(rsdp, (void *)alib);
+	}
+	else {
+		printk(BIOS_DEBUG, "	AGESA ALIB SSDT table NULL. Skipping.\n");
+	}
+
+	/* this pstate ssdt may cause Blue Screen: Fixed: Keep this comment for a while. */
+	/* SSDT */
+	current   = ALIGN(current, 16);
+	printk(BIOS_DEBUG, "ACPI:    * SSDT at %lx\n", current);
+	ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE);
+	if (ssdt != NULL) {
+		memcpy((void *)current, ssdt, ssdt->length);
+		ssdt = (acpi_header_t *) current;
+		current += ssdt->length;
+	}
+	else {
+		printk(BIOS_DEBUG, "  AGESA PState table NULL. Skipping.\n");
+	}
+	acpi_add_table(rsdp,ssdt);
+
+	printk(BIOS_DEBUG, "ACPI:    * SSDT for PState at %lx\n", current);
+
+	printk(BIOS_DEBUG, "ACPI:    * SSDT\n");
+	ssdt = (acpi_header_t *)current;
+
+	acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR);
+	current += ssdt->length;
+	acpi_add_table(rsdp, ssdt);
+
+	printk(BIOS_INFO, "ACPI: done.\n");
+	return current;
+}
diff --git a/src/mainboard/hp/abm/agesawrapper.c b/src/mainboard/hp/abm/agesawrapper.c
new file mode 100644
index 0000000..77f9d9d
--- /dev/null
+++ b/src/mainboard/hp/abm/agesawrapper.c
@@ -0,0 +1,670 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <cpu/x86/mtrr.h>
+#include "agesawrapper.h"
+#include "BiosCallOuts.h"
+#include "PlatformGnbPcieComplex.h"
+#include <vendorcode/amd/agesa/f16kb/Proc/CPU/cpuRegisters.h>
+#include <vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCacheInit.h>
+#include <vendorcode/amd/agesa/f16kb/Proc/CPU/cpuApicUtilities.h>
+#include <vendorcode/amd/agesa/f16kb/Proc/CPU/cpuEarlyInit.h>
+#include <vendorcode/amd/agesa/f16kb/Proc/CPU/cpuLateInit.h>
+#include <vendorcode/amd/agesa/f16kb/Dispatcher.h>
+#include <vendorcode/amd/agesa/f16kb/Proc/CPU/Feature/cpuCacheInit.h>
+#include <vendorcode/amd/agesa/f16kb/Lib/amdlib.h>
+#include <vendorcode/amd/agesa/f16kb/Include/Filecode.h>
+#include <vendorcode/amd/agesa/f16kb/Proc/CPU/heapManager.h>
+#include <vendorcode/amd/agesa/f16kb/Proc/Fch/FchPlatform.h>
+#include <vendorcode/amd/agesa/f16kb/Proc/Fch/Fch.h>
+#include <cpu/amd/agesa/s3_resume.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include <southbridge/amd/agesa/hudson/hudson.h>
+
+VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr);
+VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr);
+
+#define FILECODE UNASSIGNED_FILE_FILECODE
+
+/* ACPI table pointers returned by AmdInitLate */
+VOID *DmiTable    = NULL;
+VOID *AcpiPstate  = NULL;
+VOID *AcpiSrat    = NULL;
+VOID *AcpiSlit    = NULL;
+
+VOID *AcpiWheaMce = NULL;
+VOID *AcpiWheaCmc = NULL;
+VOID *AcpiAlib    = NULL;
+VOID *AcpiIvrs    = NULL;
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+UINT32
+agesawrapper_amdinitcpuio (
+	VOID
+	)
+{
+	AGESA_STATUS                  Status;
+	UINT64                        MsrReg;
+	UINT32                        PciData;
+	PCI_ADDR                      PciAddress;
+	AMD_CONFIG_PARAMS             StdHeader;
+
+	/* Enable legacy video routing: D18F1xF4 VGA Enable */
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4);
+	PciData = 1;
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+	/* The platform BIOS needs to ensure the memory ranges of SB800 legacy
+	 * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are
+	 * set to non-posted regions.
+	 */
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84);
+	PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */
+	PciData |= 1 << 7;    /* set NP (non-posted) bit */
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80);
+	PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+	/* Map the remaining PCI hole as posted MMIO */
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C);
+	PciData = 0x00FECF00; /* last address before non-posted range */
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader);
+	MsrReg = (MsrReg >> 8) | 3;
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88);
+	PciData = (UINT32)MsrReg;
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+	/* Send all IO (0000-FFFF) to southbridge. */
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4);
+	PciData = 0x0000F000;
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0);
+	PciData = 0x00000003;
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	Status = AGESA_SUCCESS;
+	return (UINT32)Status;
+}
+
+UINT32
+agesawrapper_amdinitmmio (
+	VOID
+	)
+{
+	AGESA_STATUS                  Status;
+	UINT64                        MsrReg;
+	UINT32                        PciData;
+	PCI_ADDR                      PciAddress;
+	AMD_CONFIG_PARAMS             StdHeader;
+
+	/*
+	  Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base
+	  Address MSR register.
+	*/
+	MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1;
+	LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader);
+
+	/*
+	  Set the NB_CFG MSR register. Enable CF8 extended configuration cycles.
+	*/
+	LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader);
+	MsrReg = MsrReg | 0x0000400000000000;
+	LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader);
+
+	/* The early console init code needs access to LPC SIO at 4E/4F */
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x48);
+	LibAmdPciRead(AccessWidth32, PciAddress, &PciData, &StdHeader);
+	PciData |= 0x00000003;
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+	/* For serial port */
+	PciData = 0xFF03FFD5;
+	PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44);
+	LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+	/* Set ROM cache onto WP to decrease post time */
+	MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull;
+	LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader);
+	MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull;
+	LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader);
+
+	Status = AGESA_SUCCESS;
+	return (UINT32)Status;
+}
+
+UINT32
+agesawrapper_amdinitreset (
+	VOID
+	)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_RESET_PARAMS AmdResetParams;
+
+	LibAmdMemFill (&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	LibAmdMemFill (&AmdResetParams,
+		       0,
+		       sizeof (AMD_RESET_PARAMS),
+		       &(AmdResetParams.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET;
+	AmdParamStruct.AllocationMethod = ByHost;
+	AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS);
+	AmdParamStruct.NewStructPtr = &AmdResetParams;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+	AmdCreateStruct (&AmdParamStruct);
+	AmdResetParams.HtConfig.Depth = 0;
+#if !CONFIG_HUDSON_XHCI_ENABLE
+	AmdResetParams.FchInterface.Xhci0Enable = FALSE;
+#endif
+	AmdResetParams.FchInterface.Xhci1Enable = FALSE;
+
+	status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr);
+	if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+	AmdReleaseStruct (&AmdParamStruct);
+	return (UINT32)status;
+}
+
+UINT32
+agesawrapper_amdinitearly (
+	VOID
+	)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_EARLY_PARAMS     *AmdEarlyParamsPtr;
+
+	LibAmdMemFill (&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY;
+	AmdParamStruct.AllocationMethod = PreMemHeap;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+	AmdCreateStruct (&AmdParamStruct);
+
+	AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr;
+	OemCustomizeInitEarly (AmdEarlyParamsPtr);
+
+	status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr);
+	if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+	AmdReleaseStruct (&AmdParamStruct);
+
+	return (UINT32)status;
+}
+
+UINT32
+agesawrapper_amdinitpost (
+	VOID
+	)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS  AmdParamStruct;
+	AMD_POST_PARAMS       *PostParams;
+
+	LibAmdMemFill (&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_POST;
+	AmdParamStruct.AllocationMethod = PreMemHeap;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	AmdCreateStruct (&AmdParamStruct);
+	PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr;
+	status = AmdInitPost (PostParams);
+	if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus);
+	AmdReleaseStruct (&AmdParamStruct);
+	/* Initialize heap space */
+	EmptyHeap();
+
+	return (UINT32)status;
+}
+
+UINT32
+agesawrapper_amdinitenv (
+	VOID
+	)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_ENV_PARAMS       *EnvParam;
+
+	LibAmdMemFill (&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV;
+	AmdParamStruct.AllocationMethod = PostMemDram;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+	status = AmdCreateStruct (&AmdParamStruct);
+	EnvParam = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr;
+
+	status = AmdInitEnv (EnvParam);
+	if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(EnvParam->StdHeader.HeapStatus);
+	/* Initialize Subordinate Bus Number and Secondary Bus Number
+	 * In platform BIOS this address is allocated by PCI enumeration code
+	 Modify D1F0x18
+	*/
+
+	return (UINT32)status;
+}
+
+VOID *
+agesawrapper_getlateinitptr (
+	int pick
+	)
+{
+	switch (pick) {
+	case PICK_DMI:
+		return DmiTable;
+	case PICK_PSTATE:
+		return AcpiPstate;
+	case PICK_SRAT:
+		return AcpiSrat;
+	case PICK_SLIT:
+		return AcpiSlit;
+	case PICK_WHEA_MCE:
+		return AcpiWheaMce;
+	case PICK_WHEA_CMC:
+		return AcpiWheaCmc;
+	case PICK_ALIB:
+		return AcpiAlib;
+	case PICK_IVRS:
+		return AcpiIvrs;
+	default:
+		return NULL;
+	}
+}
+
+UINT32
+agesawrapper_amdinitmid (
+	VOID
+	)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+
+	/* Enable MMIO on AMD CPU Address Map Controller */
+	agesawrapper_amdinitcpuio ();
+
+	LibAmdMemFill (&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_MID;
+	AmdParamStruct.AllocationMethod = PostMemDram;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	AmdCreateStruct (&AmdParamStruct);
+
+	((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr)->GnbMidConfiguration.iGpuVgaMode = 0;/* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */
+	status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr);
+	if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+	AmdReleaseStruct (&AmdParamStruct);
+
+	return (UINT32)status;
+}
+
+UINT32
+agesawrapper_amdinitlate (
+	VOID
+	)
+{
+	AGESA_STATUS Status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_LATE_PARAMS *AmdLateParams;
+
+	LibAmdMemFill (&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE;
+	AmdParamStruct.AllocationMethod = PostMemDram;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+	/* NOTE: if not call amdcreatestruct, the initializer(AmdInitLateInitializer) would not be called */
+	AmdCreateStruct(&AmdParamStruct);
+	AmdLateParams = (AMD_LATE_PARAMS *)AmdParamStruct.NewStructPtr;
+	Status = AmdInitLate(AmdLateParams);
+	if (Status != AGESA_SUCCESS) {
+		agesawrapper_amdreadeventlog(AmdLateParams->StdHeader.HeapStatus);
+		ASSERT(Status == AGESA_SUCCESS);
+	}
+
+	DmiTable    = AmdLateParams->DmiTable;
+	AcpiPstate  = AmdLateParams->AcpiPState;
+	AcpiSrat    = AmdLateParams->AcpiSrat;
+	AcpiSlit    = AmdLateParams->AcpiSlit;
+
+	AcpiWheaMce = AmdLateParams->AcpiWheaMce;
+	AcpiWheaCmc = AmdLateParams->AcpiWheaCmc;
+	AcpiAlib    = AmdLateParams->AcpiAlib;
+	AcpiIvrs    = AmdLateParams->AcpiIvrs;
+
+	printk(BIOS_DEBUG, "DmiTable:%x, AcpiPstatein: %x, AcpiSrat:%x,"
+	       "AcpiSlit:%x, Mce:%x, Cmc:%x,"
+	       "Alib:%x, AcpiIvrs:%x in %s\n",
+	       (unsigned int)DmiTable, (unsigned int)AcpiPstate, (unsigned int)AcpiSrat,
+	       (unsigned int)AcpiSlit, (unsigned int)AcpiWheaMce, (unsigned int)AcpiWheaCmc,
+	       (unsigned int)AcpiAlib, (unsigned int)AcpiIvrs, __func__);
+
+	/* AmdReleaseStruct (&AmdParamStruct); */
+	return (UINT32)Status;
+}
+
+UINT32
+agesawrapper_amdlaterunaptask (
+	UINT32 Func,
+	UINT32 Data,
+	VOID *ConfigPtr
+	)
+{
+	AGESA_STATUS Status;
+	AP_EXE_PARAMS ApExeParams;
+
+	LibAmdMemFill (&ApExeParams,
+		       0,
+		       sizeof (AP_EXE_PARAMS),
+		       &(ApExeParams.StdHeader));
+
+	ApExeParams.StdHeader.AltImageBasePtr = 0;
+	ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	ApExeParams.StdHeader.Func = 0;
+	ApExeParams.StdHeader.ImageBasePtr = 0;
+	ApExeParams.FunctionNumber = Func;
+	ApExeParams.RelatedDataBlock = ConfigPtr;
+
+	Status = AmdLateRunApTask (&ApExeParams);
+	if (Status != AGESA_SUCCESS) {
+		/* agesawrapper_amdreadeventlog(); */
+		ASSERT(Status == AGESA_SUCCESS);
+	}
+
+	return (UINT32)Status;
+}
+
+#if CONFIG_HAVE_ACPI_RESUME
+
+UINT32 agesawrapper_amdinitresume(VOID)
+{
+	AGESA_STATUS status;
+	AMD_INTERFACE_PARAMS AmdParamStruct;
+	AMD_RESUME_PARAMS     *AmdResumeParamsPtr;
+	S3_DATA_TYPE            S3DataType;
+
+	LibAmdMemFill (&AmdParamStruct,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdParamStruct.StdHeader));
+
+	AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME;
+	AmdParamStruct.AllocationMethod = PreMemHeap;
+	AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+	AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdParamStruct.StdHeader.Func = 0;
+	AmdParamStruct.StdHeader.ImageBasePtr = 0;
+	AmdCreateStruct (&AmdParamStruct);
+
+	AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr;
+
+	AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0;
+	AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0;
+	S3DataType = S3DataTypeNonVolatile;
+	OemAgesaGetS3Info (S3DataType,
+			   (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize,
+			   (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage);
+
+	status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr);
+
+	if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+	AmdReleaseStruct (&AmdParamStruct);
+
+	return (UINT32)status;
+}
+
+#ifndef __PRE_RAM__
+UINT32 agesawrapper_fchs3earlyrestore (VOID)
+{
+	AGESA_STATUS status = AGESA_SUCCESS;
+
+	FCH_DATA_BLOCK      FchParams;
+	AMD_CONFIG_PARAMS StdHeader;
+
+	StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+	StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10;
+	StdHeader.AltImageBasePtr = 0;
+	StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	StdHeader.Func = 0;
+	StdHeader.ImageBasePtr = 0;
+
+	FchParams.StdHeader = &StdHeader;
+	s3_resume_init_data(&FchParams);
+
+	FchInitS3EarlyRestore(&FchParams);
+
+	return status;
+}
+#endif
+
+UINT32 agesawrapper_amds3laterestore (VOID)
+{
+	AGESA_STATUS Status;
+	AMD_INTERFACE_PARAMS    AmdInterfaceParams;
+	AMD_S3LATE_PARAMS       AmdS3LateParams;
+	AMD_S3LATE_PARAMS       *AmdS3LateParamsPtr;
+	S3_DATA_TYPE          S3DataType;
+
+	agesawrapper_amdinitcpuio();
+	LibAmdMemFill (&AmdS3LateParams,
+		       0,
+		       sizeof (AMD_S3LATE_PARAMS),
+		       &(AmdS3LateParams.StdHeader));
+	AmdInterfaceParams.StdHeader.ImageBasePtr = 0;
+	AmdInterfaceParams.AllocationMethod = ByHost;
+	AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE;
+	AmdInterfaceParams.NewStructPtr = &AmdS3LateParams;
+	AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdS3LateParamsPtr = &AmdS3LateParams;
+	AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS);
+
+	AmdCreateStruct (&AmdInterfaceParams);
+
+	AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0;
+	S3DataType = S3DataTypeVolatile;
+
+	OemAgesaGetS3Info (S3DataType,
+			   (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize,
+			   (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage);
+
+	Status = AmdS3LateRestore (AmdS3LateParamsPtr);
+	if (Status != AGESA_SUCCESS) {
+		agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus);
+		ASSERT(Status == AGESA_SUCCESS);
+	}
+
+	return (UINT32)Status;
+}
+
+#ifndef __PRE_RAM__
+
+extern UINT8 picr_data[0x54], intr_data[0x54];
+
+UINT32 agesawrapper_fchs3laterestore (VOID)
+{
+	AGESA_STATUS status = AGESA_SUCCESS;
+
+	FCH_DATA_BLOCK      FchParams;
+	AMD_CONFIG_PARAMS StdHeader;
+	UINT8 byte;
+
+	StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+	StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10;
+	StdHeader.AltImageBasePtr = 0;
+	StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	StdHeader.Func = 0;
+	StdHeader.ImageBasePtr = 0;
+
+	FchParams.StdHeader = &StdHeader;
+	s3_resume_init_data(&FchParams);
+	FchInitS3LateRestore(&FchParams);
+	/* PIC IRQ routine */
+	for (byte = 0x0; byte < sizeof(picr_data); byte ++) {
+		outb(byte, 0xC00);
+		outb(picr_data[byte], 0xC01);
+	}
+
+	/* APIC IRQ routine */
+	for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
+		outb(byte | 0x80, 0xC00);
+		outb(intr_data[byte], 0xC01);
+	}
+
+	return status;
+}
+#endif
+
+#ifndef __PRE_RAM__
+
+UINT32 agesawrapper_amdS3Save(VOID)
+{
+	AGESA_STATUS Status;
+	AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr;
+	AMD_INTERFACE_PARAMS  AmdInterfaceParams;
+	S3_DATA_TYPE          S3DataType;
+
+	LibAmdMemFill (&AmdInterfaceParams,
+		       0,
+		       sizeof (AMD_INTERFACE_PARAMS),
+		       &(AmdInterfaceParams.StdHeader));
+
+	AmdInterfaceParams.StdHeader.ImageBasePtr = 0;
+	AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+	AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdInterfaceParams.AllocationMethod = PostMemDram;
+	AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE;
+	AmdInterfaceParams.StdHeader.AltImageBasePtr = 0;
+	AmdInterfaceParams.StdHeader.Func = 0;
+
+	AmdCreateStruct(&AmdInterfaceParams);
+	AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr;
+	AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader;
+
+	Status = AmdS3Save(AmdS3SaveParamsPtr);
+	if (Status != AGESA_SUCCESS) {
+		agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus);
+		ASSERT(Status == AGESA_SUCCESS);
+	}
+
+	S3DataType = S3DataTypeNonVolatile;
+	printk(BIOS_DEBUG, "NvStorageSize=%x, NvStorage=%x\n",
+	       (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize,
+	       (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorage);
+
+	Status = OemAgesaSaveS3Info (
+		S3DataType,
+		AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize,
+		AmdS3SaveParamsPtr->S3DataBlock.NvStorage);
+
+	printk(BIOS_DEBUG, "VolatileStorageSize=%x, VolatileStorage=%x\n",
+	       (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize,
+	       (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage);
+
+	if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) {
+		S3DataType = S3DataTypeVolatile;
+
+		Status = OemAgesaSaveS3Info (
+			S3DataType,
+			AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize,
+			AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage);
+	}
+	OemAgesaSaveMtrr();
+
+	AmdReleaseStruct (&AmdInterfaceParams);
+
+	return (UINT32)Status;
+}
+
+#endif  /* #ifndef __PRE_RAM__ */
+#endif  /* CONFIG_HAVE_ACPI_RESUME */
+
+UINT32
+agesawrapper_amdreadeventlog (
+	UINT8 HeapStatus
+	)
+{
+	AGESA_STATUS Status;
+	EVENT_PARAMS AmdEventParams;
+
+	LibAmdMemFill (&AmdEventParams,
+		       0,
+		       sizeof (EVENT_PARAMS),
+		       &(AmdEventParams.StdHeader));
+
+	AmdEventParams.StdHeader.AltImageBasePtr = 0;
+	AmdEventParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+	AmdEventParams.StdHeader.Func = 0;
+	AmdEventParams.StdHeader.ImageBasePtr = 0;
+	AmdEventParams.StdHeader.HeapStatus = HeapStatus;
+	Status = AmdReadEventLog (&AmdEventParams);
+	while (AmdEventParams.EventClass != 0) {
+		printk(BIOS_DEBUG,"\nEventLog:  EventClass = %x, EventInfo = %x.\n", (unsigned int)AmdEventParams.EventClass,(unsigned int)AmdEventParams.EventInfo);
+		printk(BIOS_DEBUG,"  Param1 = %x, Param2 = %x.\n",(unsigned int)AmdEventParams.DataParam1, (unsigned int)AmdEventParams.DataParam2);
+		printk(BIOS_DEBUG,"  Param3 = %x, Param4 = %x.\n",(unsigned int)AmdEventParams.DataParam3, (unsigned int)AmdEventParams.DataParam4);
+		Status = AmdReadEventLog (&AmdEventParams);
+	}
+
+	return (UINT32)Status;
+}
diff --git a/src/mainboard/hp/abm/agesawrapper.h b/src/mainboard/hp/abm/agesawrapper.h
new file mode 100644
index 0000000..19dca96
--- /dev/null
+++ b/src/mainboard/hp/abm/agesawrapper.h
@@ -0,0 +1,75 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*----------------------------------------------------------------------------------------
+ *                             M O D U L E S    U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#ifndef _AGESAWRAPPER_H_
+#define _AGESAWRAPPER_H_
+
+#include <stdint.h>
+#include "Porting.h"
+#include "AGESA.h"
+
+/*----------------------------------------------------------------------------------------
+ *                   D E F I N I T I O N S    A N D    M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+/* Define AMD Ontario APPU SSID/SVID */
+#define AMD_APU_SVID    0x1022
+#define AMD_APU_SSID    0x1234
+#define PCIE_BASE_ADDRESS   CONFIG_MMCONF_BASE_ADDRESS
+
+enum {
+	PICK_DMI,       /* DMI Interface */
+	PICK_PSTATE,    /* Acpi Pstate SSDT Table */
+	PICK_SRAT,      /* SRAT Table */
+	PICK_SLIT,      /* SLIT Table */
+	PICK_WHEA_MCE,  /* WHEA MCE table */
+	PICK_WHEA_CMC,  /* WHEA CMV table */
+	PICK_ALIB,      /* SACPI SSDT table with ALIB implementation */
+	PICK_IVRS,      /* IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table */
+};
+
+/*---------------------------------------------------------------------------------------
+ *                          L O C A L    F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+UINT32 agesawrapper_amdinitreset (void);
+UINT32 agesawrapper_amdinitearly (void);
+UINT32 agesawrapper_amdinitenv (void);
+UINT32 agesawrapper_amdinitlate (void);
+UINT32 agesawrapper_amdinitpost (void);
+UINT32 agesawrapper_amdinitmid (void);
+UINT32 agesawrapper_amdreadeventlog (UINT8 HeapStatus);
+UINT32 agesawrapper_amdinitmmio (void);
+UINT32 agesawrapper_amdinitcpuio (void);
+void *agesawrapper_getlateinitptr (int pick);
+UINT32 agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, void *ConfigPtr);
+UINT32 agesawrapper_amdS3Save(VOID);
+UINT32 agesawrapper_amdinitresume(VOID);
+UINT32 agesawrapper_amds3laterestore (VOID);
+
+UINT32 agesawrapper_fchs3earlyrestore (VOID);
+UINT32 agesawrapper_fchs3laterestore (VOID);
+
+#endif /* _AGESAWRAPPER_H_ */
diff --git a/src/mainboard/hp/abm/buildOpts.c b/src/mainboard/hp/abm/buildOpts.c
new file mode 100644
index 0000000..1b875e0
--- /dev/null
+++ b/src/mainboard/hp/abm/buildOpts.c
@@ -0,0 +1,516 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013-2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/**
+ * @file
+ *
+ * AMD User options selection for a Brazos platform solution system
+ *
+ * This file is placed in the user's platform directory and contains the
+ * build option selections desired for that platform.
+ *
+ * For Information about this file, see @ref platforminstall.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project:      AGESA
+ * @e sub-project:  Core
+ * @e \$Revision: 23714 $   @e \$Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $
+ */
+
+#include "AGESA.h"
+//#include "CommonReturns.h"
+#include "Filecode.h"
+#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE
+
+#define INSTALL_FT3_SOCKET_SUPPORT           TRUE
+#define INSTALL_FAMILY_16_MODEL_0x_SUPPORT   TRUE
+
+#define INSTALL_G34_SOCKET_SUPPORT  FALSE
+#define INSTALL_C32_SOCKET_SUPPORT  FALSE
+#define INSTALL_S1G3_SOCKET_SUPPORT FALSE
+#define INSTALL_S1G4_SOCKET_SUPPORT FALSE
+#define INSTALL_ASB2_SOCKET_SUPPORT FALSE
+#define INSTALL_FS1_SOCKET_SUPPORT  FALSE
+#define INSTALL_FM1_SOCKET_SUPPORT  FALSE
+#define INSTALL_FP2_SOCKET_SUPPORT  FALSE
+#define INSTALL_FT1_SOCKET_SUPPORT  FALSE
+#define INSTALL_AM3_SOCKET_SUPPORT  FALSE
+#define INSTALL_FM2_SOCKET_SUPPORT  FALSE
+
+
+#ifdef BLDOPT_REMOVE_FT3_SOCKET_SUPPORT
+  #if BLDOPT_REMOVE_FT3_SOCKET_SUPPORT == TRUE
+    #undef INSTALL_FT3_SOCKET_SUPPORT
+    #define INSTALL_FT3_SOCKET_SUPPORT     FALSE
+  #endif
+#endif
+
+//#define BLDOPT_REMOVE_UDIMMS_SUPPORT           TRUE
+//#define BLDOPT_REMOVE_RDIMMS_SUPPORT           TRUE
+#define BLDOPT_REMOVE_LRDIMMS_SUPPORT          TRUE
+//#define BLDOPT_REMOVE_ECC_SUPPORT              TRUE
+//#define BLDOPT_REMOVE_BANK_INTERLEAVE          TRUE
+//#define BLDOPT_REMOVE_DCT_INTERLEAVE           TRUE
+#define BLDOPT_REMOVE_NODE_INTERLEAVE          TRUE
+#define BLDOPT_REMOVE_PARALLEL_TRAINING        TRUE
+#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT     TRUE
+//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT      TRUE
+#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT        TRUE
+//#define BLDOPT_REMOVE_ACPI_PSTATES             FALSE
+#define BLDOPT_REMOVE_SRAT                     FALSE //TRUE
+#define BLDOPT_REMOVE_SLIT                     FALSE //TRUE
+#define BLDOPT_REMOVE_WHEA                     FALSE //TRUE
+#define BLDOPT_REMOVE_CRAT                     TRUE
+#define BLDOPT_REMOVE_CDIT                     TRUE
+#define BLDOPT_REMOVE_DMI                      TRUE
+//#define BLDOPT_REMOVE_EARLY_SAMPLES            FALSE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS               TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS              TRUE
+
+//This element selects whether P-States should be forced to be independent,
+// as reported by the ACPI _PSD object. For single-link processors,
+// setting TRUE for OS to support this feature.
+
+//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT  TRUE
+
+#define BLDCFG_PCI_MMIO_BASE	CONFIG_MMCONF_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_SIZE	CONFIG_MMCONF_BUS_NUMBER
+/* Build configuration values here.
+ */
+#define BLDCFG_VRM_CURRENT_LIMIT                  15000
+#define BLDCFG_VRM_NB_CURRENT_LIMIT               13000
+#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT          21000
+#define BLDCFG_VRM_SVI_OCP_LEVEL                  BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT
+#define BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT       17000
+#define BLDCFG_VRM_NB_SVI_OCP_LEVEL               BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT
+#define BLDCFG_VRM_LOW_POWER_THRESHOLD            0
+#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD         0
+#define BLDCFG_VRM_SLEW_RATE                      10000
+#define BLDCFG_VRM_NB_SLEW_RATE                   BLDCFG_VRM_SLEW_RATE
+#define BLDCFG_VRM_HIGH_SPEED_ENABLE              TRUE
+
+#define BLDCFG_PLAT_NUM_IO_APICS                 3
+#define BLDCFG_GNB_IOAPIC_ADDRESS		0xFEC20000
+#define BLDCFG_CORE_LEVELING_MODE                CORE_LEVEL_LOWEST
+#define BLDCFG_MEM_INIT_PSTATE                   0
+#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS    0x1770 // Specifies the IO addresses trapped by the
+                                                         // core for C-state entry requests. A value
+                                                         // of 0 in this field specifies that the core
+                                                         // does not trap any IO addresses for C-state entry.
+                                                         // Values greater than 0xFFF8 results in undefined behavior.
+#define BLDCFG_PLATFORM_CSTATE_OPDATA             0x1770
+
+#define BLDCFG_AMD_PLATFORM_TYPE                  AMD_PLATFORM_MOBILE
+
+#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT         DDR1866_FREQUENCY
+#define BLDCFG_MEMORY_MODE_UNGANGED               TRUE
+#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE           TRUE
+#define BLDCFG_MEMORY_QUADRANK_TYPE               QUADRANK_UNBUFFERED
+#define BLDCFG_MEMORY_RDIMM_CAPABLE               FALSE
+#define BLDCFG_MEMORY_UDIMM_CAPABLE               TRUE
+#define BLDCFG_MEMORY_SODIMM_CAPABLE              TRUE
+#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING    TRUE
+#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING    FALSE
+#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING        TRUE
+#define BLDCFG_MEMORY_POWER_DOWN                  TRUE
+#define BLDCFG_POWER_DOWN_MODE                    POWER_DOWN_BY_CHIP_SELECT
+#define BLDCFG_ONLINE_SPARE                       FALSE
+#define BLDCFG_BANK_SWIZZLE                       TRUE
+#define BLDCFG_TIMING_MODE_SELECT                 TIMING_MODE_AUTO
+#define BLDCFG_MEMORY_CLOCK_SELECT                DDR1866_FREQUENCY
+#define BLDCFG_DQS_TRAINING_CONTROL               TRUE
+#define BLDCFG_IGNORE_SPD_CHECKSUM                FALSE
+#define BLDCFG_USE_BURST_MODE                     FALSE
+#define BLDCFG_MEMORY_ALL_CLOCKS_ON               FALSE
+#define BLDCFG_ENABLE_ECC_FEATURE                 TRUE
+#define BLDCFG_ECC_REDIRECTION                    FALSE
+#define BLDCFG_SCRUB_DRAM_RATE                    0
+#define BLDCFG_SCRUB_L2_RATE                      0
+#define BLDCFG_SCRUB_L3_RATE                      0
+#define BLDCFG_SCRUB_IC_RATE                      0
+#define BLDCFG_SCRUB_DC_RATE                      0
+#define BLDCFG_ECC_SYNC_FLOOD                     TRUE
+#define BLDCFG_ECC_SYMBOL_SIZE                    4
+#define BLDCFG_HEAP_DRAM_ADDRESS                  0xB0000ul
+#define BLDCFG_1GB_ALIGN                          FALSE
+#define BLDCFG_UMA_ALIGNMENT                      UMA_4MB_ALIGNED
+#define BLDCFG_UMA_ALLOCATION_MODE                UMA_NONE
+#define BLDCFG_PLATFORM_CSTATE_MODE               CStateModeDisabled
+#define BLDCFG_IOMMU_SUPPORT                      FALSE
+#define OPTION_GFX_INIT_SVIEW                     FALSE
+//#define BLDCFG_PLATFORM_POWER_POLICY_MODE         BatteryLife
+
+//#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL         OEM_LCD_BACK_LIGHT_CONTROL
+#define BLDCFG_CFG_ABM_SUPPORT                    TRUE
+
+#define BLDCFG_CFG_GNB_HD_AUDIO                   TRUE
+//#define BLDCFG_IGPU_SUBSYSTEM_ID            OEM_IGPU_SSID
+//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID   OEM_IGPU_HD_AUDIO_SSID
+//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID  OEM_APU_PCIE_PORTS_SSID
+
+#ifdef PCIEX_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_BASE PCIEX_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_SIZE (PCIEX_LENGTH >> 20)
+#endif
+
+#define BLDCFG_PROCESSOR_SCOPE_NAME0              'P'
+#define BLDCFG_PROCESSOR_SCOPE_NAME1              '0'
+#define BLDCFG_PCIE_TRAINING_ALGORITHM           PcieTrainingDistributed
+
+/*  Process the options...
+ * This file include MUST occur AFTER the user option selection settings
+ */
+#define AGESA_ENTRY_INIT_RESET                    TRUE
+#define AGESA_ENTRY_INIT_RECOVERY                 FALSE
+#define AGESA_ENTRY_INIT_EARLY                    TRUE
+#define AGESA_ENTRY_INIT_POST                     TRUE
+#define AGESA_ENTRY_INIT_ENV                      TRUE
+#define AGESA_ENTRY_INIT_MID                      TRUE
+#define AGESA_ENTRY_INIT_LATE                     TRUE
+#define AGESA_ENTRY_INIT_S3SAVE                   TRUE
+#define AGESA_ENTRY_INIT_RESUME                   TRUE //TRUE
+#define AGESA_ENTRY_INIT_LATE_RESTORE             TRUE
+#define AGESA_ENTRY_INIT_GENERAL_SERVICES         TRUE
+/*
+ * Customized OEM build configurations for FCH component
+ */
+// #define BLDCFG_SMBUS0_BASE_ADDRESS            0xB00
+// #define BLDCFG_SMBUS1_BASE_ADDRESS            0xB20
+// #define BLDCFG_SIO_PME_BASE_ADDRESS           0xE00
+// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS     0x400
+// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS     0x404
+// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS      0x408
+// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS     0x410
+// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS        0x420
+// #define BLDCFG_SPI_BASE_ADDRESS               0xFEC10000
+// #define BLDCFG_WATCHDOG_TIMER_BASE            0xFEC00000
+// #define BLDCFG_HPET_BASE_ADDRESS              0xFED00000
+// #define BLDCFG_SMI_CMD_PORT_ADDRESS           0xB0
+// #define BLDCFG_ACPI_PMA_BLK_ADDRESS           0xFE00
+// #define BLDCFG_ROM_BASE_ADDRESS               0xFED61000
+// #define BLDCFG_AZALIA_SSID                    0x780D1022
+// #define BLDCFG_SMBUS_SSID                     0x780B1022
+// #define BLDCFG_IDE_SSID                       0x780C1022
+// #define BLDCFG_SATA_AHCI_SSID                 0x78011022
+// #define BLDCFG_SATA_IDE_SSID                  0x78001022
+// #define BLDCFG_SATA_RAID5_SSID                0x78031022
+// #define BLDCFG_SATA_RAID_SSID                 0x78021022
+// #define BLDCFG_EHCI_SSID                      0x78081022
+// #define BLDCFG_OHCI_SSID                      0x78071022
+// #define BLDCFG_LPC_SSID                       0x780E1022
+// #define BLDCFG_SD_SSID                        0x78061022
+// #define BLDCFG_XHCI_SSID                      0x78121022
+// #define BLDCFG_FCH_PORT80_BEHIND_PCIB         FALSE
+// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP     TRUE
+// #define BLDCFG_FCH_GPP_LINK_CONFIG            PortA4
+// #define BLDCFG_FCH_GPP_PORT0_PRESENT          FALSE
+// #define BLDCFG_FCH_GPP_PORT1_PRESENT          FALSE
+// #define BLDCFG_FCH_GPP_PORT2_PRESENT          FALSE
+// #define BLDCFG_FCH_GPP_PORT3_PRESENT          FALSE
+// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG          FALSE
+// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG          FALSE
+// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG          FALSE
+// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG          FALSE
+
+CONST AP_MTRR_SETTINGS ROMDATA KabiniApMtrrSettingsList[] =
+{
+  { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E },
+  { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E },
+  { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 },
+  { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 },
+  { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 },
+  { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 },
+  { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 },
+  { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 },
+  { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 },
+  { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 },
+  { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 },
+  { CPU_LIST_TERMINAL }
+};
+
+#define BLDCFG_AP_MTRR_SETTINGS_LIST &KabiniApMtrrSettingsList
+
+//#include  "KeralaInstall.h"
+
+/*  Include the files that instantiate the configuration definitions.  */
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "AdvancedApi.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+#include "cpuFeatures.h"
+#include "Table.h"
+#include "CommonReturns.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "GnbInterface.h"
+
+                  // This is the delivery package title, "BrazosPI"
+                  // This string MUST be exactly 8 characters long
+#define AGESA_PACKAGE_STRING  {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'}
+
+                  // This is the release version number of the AGESA component
+                  // This string MUST be exactly 12 characters long
+#define AGESA_VERSION_STRING  {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '}
+
+/* MEMORY_BUS_SPEED */
+//#define DDR400_FREQUENCY   200     ///< DDR 400
+//#define DDR533_FREQUENCY   266     ///< DDR 533
+//#define DDR667_FREQUENCY   333     ///< DDR 667
+//#define DDR800_FREQUENCY   400     ///< DDR 800
+//#define DDR1066_FREQUENCY   533    ///< DDR 1066
+//#define DDR1333_FREQUENCY   667    ///< DDR 1333
+//#define DDR1600_FREQUENCY   800    ///< DDR 1600
+//#define DDR1866_FREQUENCY   933    ///< DDR 1866
+//#define DDR2100_FREQUENCY   1050   ///< DDR 2100
+//#define DDR2133_FREQUENCY   1066   ///< DDR 2133
+//#define DDR2400_FREQUENCY   1200   ///< DDR 2400
+//#define UNSUPPORTED_DDR_FREQUENCY		1201 ///< Highest limit of DDR frequency
+//
+///* QUANDRANK_TYPE*/
+//#define QUADRANK_REGISTERED				0 ///< Quadrank registered DIMM
+//#define QUADRANK_UNBUFFERED				1 ///< Quadrank unbuffered DIMM
+//
+///* USER_MEMORY_TIMING_MODE */
+//#define TIMING_MODE_AUTO				0 ///< Use best rate possible
+//#define TIMING_MODE_LIMITED				1 ///< Set user top limit
+//#define TIMING_MODE_SPECIFIC			2 ///< Set user specified speed
+//
+///* POWER_DOWN_MODE */
+//#define POWER_DOWN_BY_CHANNEL			0 ///< Channel power down mode
+//#define POWER_DOWN_BY_CHIP_SELECT		1 ///< Chip select power down mode
+
+/*
+ * Agesa optional capabilities selection.
+ * Uncomment and mark FALSE those features you wish to include in the build.
+ * Comment out or mark TRUE those features you want to REMOVE from the build.
+ */
+
+#define DFLT_SMBUS0_BASE_ADDRESS            0xB00
+#define DFLT_SMBUS1_BASE_ADDRESS            0xB20
+#define DFLT_SIO_PME_BASE_ADDRESS           0xE00
+#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS     0x800
+#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS     0x804
+#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS      0x808
+#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS     0x810
+#define DFLT_ACPI_GPE0_BLOCK_ADDRESS        0x820
+#define DFLT_SPI_BASE_ADDRESS               0xFEC10000
+#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS    0xFEC000F0
+#define DFLT_HPET_BASE_ADDRESS              0xFED00000
+#define DFLT_SMI_CMD_PORT                   0xB0
+#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS       0xFE00
+#define DFLT_GEC_BASE_ADDRESS               0xFED61000
+#define DFLT_AZALIA_SSID                    0x780D1022
+#define DFLT_SMBUS_SSID                     0x780B1022
+#define DFLT_IDE_SSID                       0x780C1022
+#define DFLT_SATA_AHCI_SSID                 0x78011022
+#define DFLT_SATA_IDE_SSID                  0x78001022
+#define DFLT_SATA_RAID5_SSID                0x78031022
+#define DFLT_SATA_RAID_SSID                 0x78021022
+#define DFLT_EHCI_SSID                      0x78081022
+#define DFLT_OHCI_SSID                      0x78071022
+#define DFLT_LPC_SSID                       0x780E1022
+#define DFLT_SD_SSID                        0x78061022
+#define DFLT_XHCI_SSID                      0x78121022
+#define DFLT_FCH_PORT80_BEHIND_PCIB         FALSE
+#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP     TRUE
+#define DFLT_FCH_GPP_LINK_CONFIG            PortA4
+#define DFLT_FCH_GPP_PORT0_PRESENT          FALSE
+#define DFLT_FCH_GPP_PORT1_PRESENT          FALSE
+#define DFLT_FCH_GPP_PORT2_PRESENT          FALSE
+#define DFLT_FCH_GPP_PORT3_PRESENT          FALSE
+#define DFLT_FCH_GPP_PORT0_HOTPLUG          FALSE
+#define DFLT_FCH_GPP_PORT1_HOTPLUG          FALSE
+#define DFLT_FCH_GPP_PORT2_HOTPLUG          FALSE
+#define DFLT_FCH_GPP_PORT3_HOTPLUG          FALSE
+//#define BLDCFG_IR_PIN_CONTROL	0x33
+
+GPIO_CONTROL   hp_abm_gpio[] = {
+	{ 45, Function2, GpioOutEnB | Sticky },                   // Signal input  APU_SD_LED
+	{ 49, Function2, PullUpB | PullDown | Sticky },           // Signal output APU_ABM_LED_UID
+	{ 50, Function2, PullUpB | PullDown | Sticky },           // Signal output APU_ABM_LED_HEALTH
+	{ 51, Function2, GpioOut | PullUpB | PullDown | Sticky }, // Signal output APU_ABM_LED_FAULT
+	{ 57, Function2, GpioOutEnB | Sticky },                   // Signal input  SATA_PRSNT_L
+	{ 58, Function2, GpioOutEnB | Sticky },                   // Signal  i/o   APU_HDMI_CEC
+	{ 64, Function2, GpioOutEnB | Sticky },                   // Signal input  SWC_APU_INT_L
+	{ 68, Function0, GpioOutEnB | Sticky },                   // Signal input  CNTRL1_PRSNT
+	{ 69, Function0, GpioOutEnB | Sticky },                   // Signal input  CNTRL2_PRSNT
+	{ 71, Function0, GpioOut | PullUpB | PullDown | Sticky }, // Signal output APU_PROCHOT_L_R
+	{-1}
+};
+#define BLDCFG_FCH_GPIO_CONTROL_LIST           (&hp_abm_gpio[0])
+
+// The following definitions specify the default values for various parameters in which there are
+// no clearly defined defaults to be used in the common file.  The values below are based on product
+// and BKDG content, please consult the AGESA Memory team for consultation.
+#define DFLT_SCRUB_DRAM_RATE            (0)
+#define DFLT_SCRUB_L2_RATE              (0)
+#define DFLT_SCRUB_L3_RATE              (0)
+#define DFLT_SCRUB_IC_RATE              (0)
+#define DFLT_SCRUB_DC_RATE              (0)
+#define DFLT_MEMORY_QUADRANK_TYPE       QUADRANK_UNBUFFERED
+#define DFLT_VRM_SLEW_RATE              (5000)
+
+#include "PlatformInstall.h"
+
+/*----------------------------------------------------------------------------------------
+ *                        CUSTOMER OVERIDES MEMORY TABLE
+ *----------------------------------------------------------------------------------------
+ */
+
+/*
+ *  Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
+ *  (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
+ *  is populated, AGESA will base its settings on the data from the table. Otherwise, it will
+ *  use its default conservative settings.
+ */
+CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
+  //
+  // The following macros are supported (use comma to separate macros):
+  //
+  // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap)
+  //      The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap.
+  //      AGESA will base on this value to disable unused MemClk to save power.
+  //      Example:
+  //      BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below:
+  //           Bit AM3/S1g3 pin name
+  //           0   M[B,A]_CLK_H/L[0]
+  //           1   M[B,A]_CLK_H/L[1]
+  //           2   M[B,A]_CLK_H/L[2]
+  //           3   M[B,A]_CLK_H/L[3]
+  //           4   M[B,A]_CLK_H/L[4]
+  //           5   M[B,A]_CLK_H/L[5]
+  //           6   M[B,A]_CLK_H/L[6]
+  //           7   M[B,A]_CLK_H/L[7]
+  //      And platform has the following routing:
+  //           CS0   M[B,A]_CLK_H/L[4]
+  //           CS1   M[B,A]_CLK_H/L[2]
+  //           CS2   M[B,A]_CLK_H/L[3]
+  //           CS3   M[B,A]_CLK_H/L[5]
+  //      Then platform can specify the following macro:
+  //      MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00)
+  //
+  // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap)
+  //      The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap.
+  //      AGESA will base on this value to tristate unused CKE to save power.
+  //
+  // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap)
+  //      The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap.
+  //      AGESA will base on this value to tristate unused ODT pins to save power.
+  //
+  // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap)
+  //      The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap.
+  //      AGESA will base on this value to tristate unused Chip select to save power.
+  //
+  // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel)
+  //      Specifies the number of DIMM slots per channel.
+  //
+  // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel)
+  //      Specifies the number of Chip selects per channel.
+  //
+  // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket)
+  //      Specifies the number of channels per socket.
+  //
+  // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED)
+  //      Specifies DDR bus speed of channel ChannelID on socket SocketID.
+  //
+  // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE)
+  //      Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...)
+  //
+  // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+  //      Byte6Seed, Byte7Seed, ByteEccSeed)
+  //      Specifies the write leveling seed for a channel of a socket.
+  //
+  // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+  //      Byte6Seed, Byte7Seed, ByteEccSeed)
+  //      Speicifes the HW RXEN training seed for a channel of a socket
+  //
+	#define SEED_A 0x12
+	HW_RXEN_SEED(
+		ANY_SOCKET, CHANNEL_A, ALL_DIMMS,
+		SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A,
+		SEED_A),
+
+  NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, ONE_DIMM),
+  NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, ONE_DIMM),
+  MOTHER_BOARD_LAYERS (LAYERS_6),
+
+  MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
+  CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08), /* TODO: bit2map, bit3map */
+  ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08),
+  CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00),
+
+  PSO_END
+};
+
+/*
+ * These tables are optional and may be used to adjust memory timing settings
+ */
+#include "mm.h"
+#include "mn.h"
+
+// Customer table
+UINT8 AGESA_MEM_TABLE_TN[][sizeof (MEM_TABLE_ALIAS)] =
+{
+ // Hardcoded Memory Training Values
+
+ // The following macro should be used to override training values for your platform
+ //
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
+ //
+ //   NOTE:
+ //   The following training hardcode values are example values that were taken from a tilapia motherboard
+ //   with a particular DIMM configuration.  To hardcode your own values, uncomment the appropriate line in
+ //   the table and replace the byte lane values with your own.
+ //
+ //                                                                               ------------------ BYTE LANES ----------------------
+ //                                                                                BL0   BL1   BL2   BL3   BL4   BL5   BL6   Bl7   ECC
+ // Write Data Timing
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
+
+ // DQS Receiver Enable
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
+
+ // Write DQS Delays
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
+
+ // Read DQS Delays
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
+ //--------------------------------------------------------------------------------------------------------------------------------------------------
+ // TABLE END
+  NBACCESS (MTEnd, 0,  0, 0, 0, 0),      // End of Table
+};
+UINT8 SizeOfTableTN = sizeof (AGESA_MEM_TABLE_TN) / sizeof (AGESA_MEM_TABLE_TN[0]);
diff --git a/src/mainboard/hp/abm/cmos.layout b/src/mainboard/hp/abm/cmos.layout
new file mode 100644
index 0000000..4edf8bf
--- /dev/null
+++ b/src/mainboard/hp/abm/cmos.layout
@@ -0,0 +1,115 @@
+#*****************************************************************************
+#
+#  This file is part of the coreboot project.
+#
+#  Copyright (C) 2012 Advanced Micro Devices, Inc.
+#  Copyright (C) 2014 Sage Electronic Engineering, LLC
+#
+#  This program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; version 2 of the License.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with this program; if not, write to the Free Software
+#  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+#*****************************************************************************
+
+entries
+
+#start-bit length  config config-ID    name
+#0            8       r       0        seconds
+#8            8       r       0        alarm_seconds
+#16           8       r       0        minutes
+#24           8       r       0        alarm_minutes
+#32           8       r       0        hours
+#40           8       r       0        alarm_hours
+#48           8       r       0        day_of_week
+#56           8       r       0        day_of_month
+#64           8       r       0        month
+#72           8       r       0        year
+#80           4       r       0        rate_select
+#84           3       r       0        REF_Clock
+#87           1       r       0        UIP
+#88           1       r       0        auto_switch_DST
+#89           1       r       0        24_hour_mode
+#90           1       r       0        binary_values_enable
+#91           1       r       0        square-wave_out_enable
+#92           1       r       0        update_finished_enable
+#93           1       r       0        alarm_interrupt_enable
+#94           1       r       0        periodic_interrupt_enable
+#95           1       r       0        disable_clock_updates
+#96         288       r       0        temporary_filler
+0          384       r       0        reserved_memory
+384          1       e       4        boot_option
+385          1       e       4        last_boot
+386          1       e       1        ECC_memory
+388          4       r       0        reboot_bits
+392          3       e       5        baud_rate
+395          1       e       1        hw_scrubber
+396          1       e       1        interleave_chip_selects
+397          2       e       8        max_mem_clock
+399          1       e       2        multi_core
+400          1       e       1        power_on_after_fail
+412          4       e       6        debug_level
+416          4       e       7        boot_first
+420          4       e       7        boot_second
+424          4       e       7        boot_third
+428          4       h       0        boot_index
+432          8       h       0        boot_countdown
+440          4       e       9        slow_cpu
+444          1       e       1        nmi
+445          1       e       1        iommu
+728        256       h       0        user_data
+984         16       h       0        check_sum
+# Reserve the extended AMD configuration registers
+1000        24       r       0        amd_reserved
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+5     0     115200
+5     1     57600
+5     2     38400
+5     3     19200
+5     4     9600
+5     5     4800
+5     6     2400
+5     7     1200
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+7     0     Network
+7     1     HDD
+7     2     Floppy
+7     8     Fallback_Network
+7     9     Fallback_HDD
+7     10    Fallback_Floppy
+#7     3     ROM
+8     0     400Mhz
+8     1     333Mhz
+8     2     266Mhz
+8     3     200Mhz
+9     0     off
+9     1     87.5%
+9     2     75.0%
+9     3     62.5%
+9     4     50.0%
+9     5     37.5%
+9     6     25.0%
+9     7     12.5%
+
+checksums
+
+checksum 392 983 984
diff --git a/src/mainboard/hp/abm/devicetree.cb b/src/mainboard/hp/abm/devicetree.cb
new file mode 100644
index 0000000..eb18a05
--- /dev/null
+++ b/src/mainboard/hp/abm/devicetree.cb
@@ -0,0 +1,95 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2013 Advanced Micro Devices, Inc.
+# Copyright (C) 2014 Sage Electronic Engineering, LLC
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+chip northbridge/amd/agesa/family16kb/root_complex
+	device cpu_cluster 0 on
+		chip cpu/amd/agesa/family16kb
+			device lapic 0 on  end
+		end
+	end
+
+	device domain 0 on
+		subsystemid 0x1022 0x1410 inherit
+		chip northbridge/amd/agesa/family16kb # CPU side of HT root complex
+
+			chip northbridge/amd/agesa/family16kb # PCI side of HT root complex
+				device pci 0.0 on  end  # Root Complex
+				device pci 1.0 on  end  # Internal Graphics P2P bridge 0x9804
+				device pci 1.1 on  end  # Internal Multimedia
+				device pci 2.0 on  end  # PCIe Host Bridge
+				device pci 2.1 off end  # unused
+				device pci 2.2 on  end  # GPP0: NIC
+				device pci 2.3 on  end  # GPP1: NIC
+				device pci 2.4 off end  # GPP2: unused
+				device pci 2.5 off end  # GPP3: unused
+			end	#chip northbridge/amd/agesa/family16kb
+
+			chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus
+				device pci 11.0 on  end # SATA
+				device pci 12.0 on  end # USB
+				device pci 12.2 on  end # USB
+				device pci 13.0 on  end # USB
+				device pci 13.2 on  end # USB
+				device pci 14.0 on      # SM
+					chip drivers/generic/generic    #dimm 0-0-0
+						device i2c 50 on end
+					end
+				end # SM
+				device pci 14.2 off end             # HDA 0x4383
+				device pci 14.3 on                  # LPC 0x439d
+					chip superio/nuvoton/nct5104d
+						device pnp 4e.0  off end    # FDC
+						device pnp 4e.2  on         # COM1
+							io 0x60 = 0x3f8
+							irq 0x70 = 4
+						end
+						device pnp 4e.3  on         # COM2
+							io 0x60 = 0x2f8
+							irq 0x70 = 3
+						end
+						device pnp 4e.7  off end    # GPIO
+						device pnp 4e.8  off end    # GPIO/WDT
+						device pnp 4e.f  off end    # GPIO
+						device pnp 4e.10 off end    # COM3 used by port 80
+						device pnp 4e.11 on         # COM4
+							io 0x60 = 0x2e8
+							irq 0x70 = 3
+						end
+						device pnp 4e.14 off end    # PORT80
+						register "irq_trigger_type" = "0" # 0 edge, 1 level
+					end # nct5104d
+				end #LPC
+				device pci 14.7 off end # SD
+				device pci 16.0 on  end # USB
+				device pci 16.2 on  end # USB
+			end	#chip southbridge/amd/hudson
+
+			device pci 18.0 on  end
+			device pci 18.1 on  end
+			device pci 18.2 on  end
+			device pci 18.3 on  end
+			device pci 18.4 on  end
+			device pci 18.5 on  end
+			register "spdAddrLookup" = "
+			{
+				{ {0xA0, 0x00}, {0x00, 0x00}, }, // socket 0 - Channel 0 - 8-bit SPD addresses
+			}"
+		end	#chip northbridge/amd/agesa/family16kb # CPU side of HT root complex
+	end	#domain
+end	#northbridge/amd/agesa/family16kb/root_complex
diff --git a/src/mainboard/hp/abm/dsdt.asl b/src/mainboard/hp/abm/dsdt.asl
new file mode 100644
index 0000000..7b17047
--- /dev/null
+++ b/src/mainboard/hp/abm/dsdt.asl
@@ -0,0 +1,91 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+	"DSDT.AML",	/* Output filename */
+	"DSDT",		/* Signature */
+	0x02,		/* DSDT Revision, needs to be 2 for 64bit */
+	"AMD   ",	/* OEMID */
+	"COREBOOT",	/* TABLE ID */
+	0x00010001	/* OEM Revision */
+	)
+{	/* Start of ASL file */
+	/* #include <arch/x86/acpi/debug.asl> */	/* Include global debug methods if needed */
+
+	/* Globals for the platform */
+	#include "acpi/mainboard.asl"
+
+	/* Describe the USB Overcurrent pins */
+	#include "acpi/usb_oc.asl"
+
+	/* PCI IRQ mapping for the Southbridge */
+	#include <southbridge/amd/agesa/hudson/acpi/pcie.asl>
+
+	/* Describe the processor tree (\_PR) */
+	#include <cpu/amd/agesa/family16kb/acpi/cpu.asl>
+
+	/* Contains the supported sleep states for this chipset */
+	#include <southbridge/amd/agesa/hudson/acpi/sleepstates.asl>
+
+	/* Contains the Sleep methods (WAK, PTS, GTS, etc.) */
+	#include "acpi/sleep.asl"
+
+	/* System Bus */
+	Scope(\_SB) { /* Start \_SB scope */
+		/* global utility methods expected within the \_SB scope */
+		#include <arch/x86/acpi/globutil.asl>
+
+		/* Describe IRQ Routing mapping for this platform (within the \_SB scope) */
+		#include "acpi/routing.asl"
+
+		Device(PWRB) {
+			Name(_HID, EISAID("PNP0C0C"))
+			Name(_UID, 0xAA)
+			Name(_PRW, Package () {3, 0x04})
+			Name(_STA, 0x0B)
+		}
+
+		Device(PCI0) {
+			/* Describe the AMD Northbridge */
+			#include <northbridge/amd/agesa/family16kb/acpi/northbridge.asl>
+
+			/* Describe the AMD Fusion Controller Hub Southbridge */
+			#include <southbridge/amd/agesa/hudson/acpi/fch.asl>
+		}
+
+		/* Describe PCI INT[A-H] for the Southbridge */
+		#include <southbridge/amd/agesa/hudson/acpi/pci_int.asl>
+
+	} /* End \_SB scope */
+
+	/* Describe SMBUS for the Southbridge */
+	#include <southbridge/amd/agesa/hudson/acpi/smbus.asl>
+
+	/* Define the General Purpose Events for the platform */
+	#include "acpi/gpe.asl"
+
+	/* Define the Thermal zones and methods for the platform */
+	#include "acpi/thermal.asl"
+
+	/* Define the System Indicators for the platform */
+	#include "acpi/si.asl"
+}
+/* End of ASL file */
diff --git a/src/mainboard/hp/abm/get_bus_conf.c b/src/mainboard/hp/abm/get_bus_conf.c
new file mode 100644
index 0000000..352b5df
--- /dev/null
+++ b/src/mainboard/hp/abm/get_bus_conf.c
@@ -0,0 +1,153 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <cpu/amd/amdfam14.h>
+#include "agesawrapper.h"
+
+#define KABINI_INTERNAL_MULTIMEDIA_CONTROL_AND_STATUS 0x60
+#define NO_SNOOP_ENABLE 11
+
+/* Global variables for MB layouts and these will be shared by irqtable mptable
+ * and acpi_tables busnum is default.
+ */
+u8 bus_isa;
+u8 bus_yangtze[6];
+u32 apicid_yangtze;
+
+/*
+ * Here you only need to set value in pci1234 for HT-IO that could be installed or not
+ * You may need to preset pci1234 for HTIO board,
+ * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
+ */
+u32 pci1234x[] = {
+	0x0000ff0,
+};
+
+u32 bus_type[256];
+u32 sbdn_yangtze;
+
+static u32 get_bus_conf_done = 0;
+
+#if CONFIG_HAVE_ACPI_RESUME
+extern u8 acpi_slp_type;
+#endif
+void get_bus_conf(void)
+{
+	u32 apicid_base;
+	u32 status;
+	u32 value;
+
+	device_t dev;
+	int i, j;
+
+	if (get_bus_conf_done == 1)
+		return;   /* do it only once */
+
+	get_bus_conf_done = 1;
+
+	/*
+	 * This is the call to AmdInitLate.  It is really in the wrong place, conceptually,
+	 * but functionally within the coreboot model, this is the best place to make the
+	 * call.  The logically correct place to call AmdInitLate is after PCI scan is done,
+	 * after the decision about S3 resume is made, and before the system tables are
+	 * written into RAM.  The routine that is responsible for writing the tables is
+	 * "write_tables", called near the end of "hardwaremain".  There is no platform
+	 * specific entry point between the S3 resume decision point and the call to
+	 * "write_tables", and the next platform specific entry points are the calls to
+	 * the ACPI table write functions.  The first of ose would seem to be the right
+	 * place, but other table write functions, e.g. the PIRQ table write function, are
+	 * called before the ACPI tables are written.  This routine is called at the beginning
+	 * of each of the write functions called prior to the ACPI write functions, so this
+	 * becomes the best place for this call.
+	 */
+#if CONFIG_HAVE_ACPI_RESUME
+	if (acpi_slp_type != 3) {
+		status = agesawrapper_amdinitlate();
+		if(status) {
+			printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
+		}
+		status = agesawrapper_amdS3Save();
+		if (status) {
+			printk(BIOS_DEBUG, "agesawrapper_amds3save failed: %x \n", status);
+		}
+	}
+#else
+	status = agesawrapper_amdinitlate();
+	if (status)
+		printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
+#endif /* CONFIG_HAVE_ACPI_RESUME */
+
+	dev = dev_find_slot(0, PCI_DEVFN(0, 0)); /* clear IoapicSbFeatureEn */
+	pci_write_config32(dev, 0xF8, 0);
+	pci_write_config32(dev, 0xFC, 5); /* TODO: move it to dsdt.asl */
+
+	/* disable No Snoop */
+	dev = dev_find_slot(0, PCI_DEVFN(1, 1));
+	value = pci_read_config32(dev, KABINI_INTERNAL_MULTIMEDIA_CONTROL_AND_STATUS);
+	value &= ~(1 << NO_SNOOP_ENABLE);
+	pci_write_config32(dev, KABINI_INTERNAL_MULTIMEDIA_CONTROL_AND_STATUS, value);
+
+	sbdn_yangtze = 0;
+
+	memset(bus_yangtze, 0, sizeof(bus_yangtze));
+
+	for (i = 0; i < 256; i++) {
+		bus_type[i] = 0; /* default ISA bus. */
+	}
+
+	bus_type[0] = 1;  /* pci */
+
+	//  bus_yangtze[0] = (sysconf.pci1234[0] >> 16) & 0xff;
+	bus_yangtze[0] = (pci1234x[0] >> 16) & 0xff;
+
+	/* yangtze */
+	dev = dev_find_slot(bus_yangtze[0], PCI_DEVFN(sbdn_yangtze + 0x14, 4));
+
+	if (dev) {
+		bus_yangtze[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+		bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+		bus_isa++;
+		for (j = bus_yangtze[1]; j < bus_isa; j++)
+			bus_type[j] = 1;
+	}
+
+	for (i = 0; i < 4; i++) {
+		dev = dev_find_slot(bus_yangtze[0], PCI_DEVFN(sbdn_yangtze + 0x14, i));
+		if (dev) {
+			bus_yangtze[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+			bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+			bus_isa++;
+		}
+	}
+	for (j = bus_yangtze[2]; j < bus_isa; j++)
+		bus_type[j] = 1;
+
+	/* I/O APICs:   APIC ID Version State   Address */
+	bus_isa = 10;
+	apicid_base = CONFIG_MAX_CPUS;
+	apicid_yangtze = apicid_base;
+}
diff --git a/src/mainboard/hp/abm/irq_tables.c b/src/mainboard/hp/abm/irq_tables.c
new file mode 100644
index 0000000..6c0fd01
--- /dev/null
+++ b/src/mainboard/hp/abm/irq_tables.c
@@ -0,0 +1,113 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+#include <cpu/amd/amdfam16.h>
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+			    u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+			    u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+			    u8 slot, u8 rfu)
+{
+	pirq_info->bus = bus;
+	pirq_info->devfn = devfn;
+	pirq_info->irq[0].link = link0;
+	pirq_info->irq[0].bitmap = bitmap0;
+	pirq_info->irq[1].link = link1;
+	pirq_info->irq[1].bitmap = bitmap1;
+	pirq_info->irq[2].link = link2;
+	pirq_info->irq[2].bitmap = bitmap2;
+	pirq_info->irq[3].link = link3;
+	pirq_info->irq[3].bitmap = bitmap3;
+	pirq_info->slot = slot;
+	pirq_info->rfu = rfu;
+}
+
+extern u8 bus_isa;
+extern u8 bus_yangtze[6];
+extern unsigned long sbdn_yangtze;
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+	struct irq_routing_table *pirq;
+	struct irq_info *pirq_info;
+	u32 slot_num;
+	u8 *v;
+
+	u8 sum = 0;
+	int i;
+
+	get_bus_conf();		/* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */
+
+	/* Align the table to be 16 byte aligned. */
+	addr += 15;
+	addr &= ~15;
+
+	/* This table must be betweeen 0xf0000 & 0x100000 */
+	printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+	pirq = (void *)(addr);
+	v = (u8 *) (addr);
+
+	pirq->signature = PIRQ_SIGNATURE;
+	pirq->version = PIRQ_VERSION;
+
+	pirq->rtr_bus = bus_yangtze[0];
+	pirq->rtr_devfn = ((sbdn_yangtze + 0x14) << 3) | 4;
+
+	pirq->exclusive_irqs = 0;
+
+	pirq->rtr_vendor = 0x1002;
+	pirq->rtr_device = 0x4384;
+
+	pirq->miniport_data = 0;
+
+	memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+	pirq_info = (void *)(&pirq->checksum + 1);
+	slot_num = 0;
+
+	/* pci bridge */
+	write_pirq_info(pirq_info, bus_yangtze[0], ((sbdn_yangtze + 0x14) << 3) | 4,
+			0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+			0);
+	pirq_info++;
+
+	slot_num++;
+
+	pirq->size = 32 + 16 * slot_num;
+
+	for (i = 0; i < pirq->size; i++)
+		sum += v[i];
+
+	sum = pirq->checksum - sum;
+
+	if (sum != pirq->checksum) {
+		pirq->checksum = sum;
+	}
+
+	printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+	return (unsigned long)pirq_info;
+}
diff --git a/src/mainboard/hp/abm/mainboard.c b/src/mainboard/hp/abm/mainboard.c
new file mode 100644
index 0000000..a8f55ce
--- /dev/null
+++ b/src/mainboard/hp/abm/mainboard.c
@@ -0,0 +1,136 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <southbridge/amd/amd_pci_util.h>
+#include <arch/acpi.h>
+#include "BiosCallOuts.h"
+#include <cpu/amd/agesa/s3_resume.h>
+#include <southbridge/amd/agesa/hudson/pci_devs.h>
+#include <northbridge/amd/agesa/family16kb/pci_devs.h>
+#include "agesawrapper.h"
+
+void set_pcie_reset(void);
+void set_pcie_dereset(void);
+
+/***********************************************************
+ * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01.
+ * This table is responsible for physically routing the PIC and
+ * IOAPIC IRQs to the different PCI devices on the system.  It
+ * is read and written via registers 0xC00/0xC01 as an
+ * Index/Data pair.  These values are chipset and mainboard
+ * dependent and should be updated accordingly.
+ *
+ * These values are used by the PCI configuration space,
+ * MP Tables.  TODO: Make ACPI use these values too.
+ */
+static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = {
+	[0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B, /* INTA# - INTH# */
+	[0x08] = 0x00,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */
+	[0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F,0x0A, /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerfMon, SD */
+	[0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,           /* IMC INT0 - 5 */
+	[0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,      /* USB Devs 18/19/20/22 INTA-C */
+	[0x40] = 0x0B,0x0B,                               /* IDE, SATA */
+};
+
+static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = {
+	[0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */
+	[0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */
+	[0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x10, /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon, SD */
+	[0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,           /* IMC INT0 - 5 */
+	[0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12,      /* USB Devs 18/19/22/20 INTA-C */
+	[0x40] = 0x11,0x13,                               /* IDE, SATA */
+};
+
+/*
+ * This table defines the index into the picr/intr_data
+ * tables for each device.  Any enabled device and slot
+ * that uses hardware interrupts should have an entry
+ * in this table to define its index into the FCH
+ * PCI_INTR register 0xC00/0xC01.  This index will define
+ * the interrupt that it should use.  Putting PIRQ_A into
+ * the PIN A index for a device will tell that device to
+ * use PIC IRQ 10 if it uses PIN A for its hardware INT.
+ */
+static const struct pirq_struct mainboard_pirq_data[] = {
+	/* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */
+	{GFX_DEVFN,           {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}},      /* VGA:     01.0 */
+	{NB_PCIE_PORT2_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}},        /* NIC:     02.2 */
+	{NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}},        /* NIC:     02.3 */
+	{NB_PCIE_PORT4_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}},        /* NIC:     02.4 */
+	{NB_PCIE_PORT5_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}},        /* NIC:     02.5 */
+	{SATA_DEVFN,          {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}},  /* SATA:    11.0 */
+	{OHCI1_DEVFN,         {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1:   12.0 */
+	{EHCI1_DEVFN,         {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1:   12.2 */
+	{OHCI2_DEVFN,         {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2:   13.0 */
+	{EHCI2_DEVFN,         {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2:   13.2 */
+	{SMBUS_DEVFN,         {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS:   14.0 */
+	{HDA_DEVFN,           {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}},   /* HDA:     14.2 */
+	{SB_PCI_PORT_DEVFN,   {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}},        /* PCIB:    14.4 */
+	{SD_DEVFN,            {PIRQ_SD, PIRQ_NC, PIRQ_NC, PIRQ_NC}},    /* SD:      14.7 */
+	{OHCI3_DEVFN,         {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3:   16.0 */
+	{EHCI3_DEVFN,         {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3:   16.2 */
+};
+
+/* PIRQ Setup */
+static void pirq_setup(void)
+{
+	pirq_data_ptr = mainboard_pirq_data;
+	pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct);
+	intr_data_ptr = mainboard_intr_data;
+	picr_data_ptr = mainboard_picr_data;
+}
+
+/* TODO: mainboard specific SB AGESA callback */
+void set_pcie_reset(void)
+{
+}
+
+/* TODO: mainboard specific SB AGESA callback */
+void set_pcie_dereset(void)
+{
+}
+
+/**********************************************
+ * Enable the dedicated functions of the board.
+ **********************************************/
+static void mainboard_enable(device_t dev)
+{
+	printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+	/*
+	 * The mainboard is the first place that we get control in ramstage. Check
+	 * for S3 resume and call the appropriate AGESA/CIMx resume functions.
+	 */
+#if CONFIG_HAVE_ACPI_RESUME
+	acpi_slp_type = acpi_get_sleep_type();
+	if (acpi_slp_type == 3)
+		agesawrapper_fchs3earlyrestore();
+#endif
+
+	/* Initialize the PIRQ data structures for consumption */
+	pirq_setup();
+}
+
+struct chip_operations mainboard_ops = {
+	.enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/hp/abm/mptable.c b/src/mainboard/hp/abm/mptable.c
new file mode 100644
index 0000000..7ca71fa
--- /dev/null
+++ b/src/mainboard/hp/abm/mptable.c
@@ -0,0 +1,246 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <string.h>
+#include <stdint.h>
+#include <cpu/amd/amdfam15.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include "southbridge/amd/agesa/hudson/hudson.h" /* pm_ioread() */
+
+//-#define IO_APIC_ID    CONFIG_MAX_PHYSICAL_CPUS + 1
+#define IO_APIC_ID    CONFIG_MAX_CPUS
+extern u8 bus_yangtze[6];
+
+extern u32 bus_type[256];
+extern u32 sbdn_yangtze;
+extern u32 apicid_yangtze;
+
+u8 picr_data[0x54] = {
+	0x03,0x04,0x05,0x07,0x0B,0x0A,0x1F,0x1F,0xFA,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+	0x1F,0x1F,0x1F,0x03,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x05,0x04,0x05,0x04,0x04,0x05,0x04,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x04,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x03,0x04,0x05,0x07
+};
+u8 intr_data[0x54] = {
+	0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+	0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+	0x10,0x11,0x12,0x13
+};
+
+static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length)
+{
+	mc->mpc_length += length;
+	mc->mpc_entry_count++;
+}
+
+static void my_smp_write_bus(struct mp_config_table *mc,
+			     unsigned char id, const char *bustype)
+{
+	struct mpc_config_bus *mpc;
+	mpc = smp_next_mpc_entry(mc);
+	memset(mpc, '\0', sizeof(*mpc));
+	mpc->mpc_type = MP_BUS;
+	mpc->mpc_busid = id;
+	memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype));
+	smp_add_mpc_entry(mc, sizeof(*mpc));
+}
+
+static void *smp_write_config_table(void *v)
+{
+	struct mp_config_table *mc;
+	int bus_isa;
+	u32 dword;
+	u8 byte;
+
+	mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+
+	mptable_init(mc, LOCAL_APIC_ADDR);
+	memcpy(mc->mpc_oem, "AMD     ", 8);
+
+	smp_write_processors(mc);
+
+	get_bus_conf();
+
+	//mptable_write_buses(mc, NULL, &bus_isa);
+	my_smp_write_bus(mc, 0, "PCI   ");
+	my_smp_write_bus(mc, 1, "PCI   ");
+	bus_isa = 0x02;
+	my_smp_write_bus(mc, bus_isa, "ISA   ");
+
+	/* I/O APICs:   APIC ID Version State   Address */
+
+	dword = 0;
+	dword = pm_read8(0x34) & 0xF0;
+	dword |= (pm_read8(0x35) & 0xFF) << 8;
+	dword |= (pm_read8(0x36) & 0xFF) << 16;
+	dword |= (pm_read8(0x37) & 0xFF) << 24;
+	/* Set IO APIC ID onto IO_APIC_ID */
+	write32 (dword, 0x00);
+	write32 (dword + 0x10, IO_APIC_ID << 24);
+	apicid_yangtze = IO_APIC_ID;
+	smp_write_ioapic(mc, apicid_yangtze, 0x21, dword);
+
+	smp_write_ioapic(mc, apicid_yangtze+1, 0x21, 0xFEC20000);
+	/* PIC IRQ routine */
+	for (byte = 0x0; byte < sizeof(picr_data); byte ++) {
+		outb(byte, 0xC00);
+		outb(picr_data[byte], 0xC01);
+	}
+
+	/* APIC IRQ routine */
+	for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
+		outb(byte | 0x80, 0xC00);
+		outb(intr_data[byte], 0xC01);
+	}
+#if 0
+	outb(0x0B, 0xCD6);
+	outb(0x02, 0xCD7);
+
+	outb(0x50, 0xCD6);
+	outb(0x1F, 0xCD7);
+
+	outb(0x48, 0xCD6);
+	outb(0xF2, 0xCD7);
+
+	//outb(0xBE, 0xCD6);
+	//outb(0x52, 0xCD7);
+
+	outb(0xED, 0xCD6);
+	outb(0x17, 0xCD7);
+
+	*(volatile u8 *) (0xFED80D00 + 0x31) = 2;
+	*(volatile u8 *) (0xFED80D00 + 0x32) = 2;
+	*(volatile u8 *) (0xFED80D00 + 0x33) = 2;
+	*(volatile u8 *) (0xFED80D00 + 0x34) = 2;
+
+	*(volatile u8 *) (0xFED80100 + 0x31) = 0xc8;
+	*(volatile u8 *) (0xFED80100 + 0x32) = 0xc8;
+	*(volatile u8 *) (0xFED80100 + 0x33) = 0xc8;
+	*(volatile u8 *) (0xFED80100 + 0x34) = 0xa0;
+
+	*(volatile u8 *) (0xFED80D00 + 0x6c) = 1;
+	*(volatile u8 *) (0xFED80D00 + 0x6E) = 2;
+	*(volatile u8 *) (0xFED80D00 + 0x6f) = 2;
+
+	*(volatile u8 *) (0xFED80100 + 0x6c) = 0xa0;
+	*(volatile u8 *) (0xFED80100 + 0x6E) = 0xa8;
+	*(volatile u8 *) (0xFED80100 + 0x6f) = 0xa0;
+
+	*(volatile u8 *) (0xFED80D00 + 0xA6) = 2;
+	*(volatile u8 *) (0xFED80100 + 0xA6) = 0;
+
+	*(volatile u8 *) (0xFED80100 + 0x40) = 0xC8;
+#endif
+	/* I/O Ints:    Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin)				\
+	smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+	mptable_add_isa_interrupts(mc, bus_isa, apicid_yangtze, 0);
+
+	/* PCI interrupts are level triggered, and are
+	 * associated with a specific bus/device/function tuple.
+	 */
+#define PCI_INT(bus, dev, int_sign, pin)				\
+        smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), apicid_yangtze, (pin))
+
+	/* Internal VGA */
+	PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]);
+	PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]);
+
+	/* SMBUS */
+	PCI_INT(0x0, 0x14, 0x0, 0x10);
+
+	/* HD Audio */
+	PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]);
+
+	/* USB */
+	PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]);
+	PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
+	PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
+	PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
+	PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
+	PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
+	PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]);
+
+	/* sata */
+	PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]);
+	PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
+
+	/* on board NIC & Slot PCIE.  */
+
+	/* PCI slots */
+	/* PCI_SLOT 0. */
+	PCI_INT(bus_yangtze[1], 0x5, 0x0, 0x14);
+	PCI_INT(bus_yangtze[1], 0x5, 0x1, 0x15);
+	PCI_INT(bus_yangtze[1], 0x5, 0x2, 0x16);
+	PCI_INT(bus_yangtze[1], 0x5, 0x3, 0x17);
+
+	/* PCI_SLOT 1. */
+	PCI_INT(bus_yangtze[1], 0x6, 0x0, 0x15);
+	PCI_INT(bus_yangtze[1], 0x6, 0x1, 0x16);
+	PCI_INT(bus_yangtze[1], 0x6, 0x2, 0x17);
+	PCI_INT(bus_yangtze[1], 0x6, 0x3, 0x14);
+
+	/* PCI_SLOT 2. */
+	PCI_INT(bus_yangtze[1], 0x7, 0x0, 0x16);
+	PCI_INT(bus_yangtze[1], 0x7, 0x1, 0x17);
+	PCI_INT(bus_yangtze[1], 0x7, 0x2, 0x14);
+	PCI_INT(bus_yangtze[1], 0x7, 0x3, 0x15);
+
+	PCI_INT(bus_yangtze[2], 0x0, 0x0, 0x12);
+	PCI_INT(bus_yangtze[2], 0x0, 0x1, 0x13);
+	PCI_INT(bus_yangtze[2], 0x0, 0x2, 0x14);
+
+	/* PCIe Lan*/
+	PCI_INT(0x0, 0x06, 0x0, 0x13);
+
+	/* FCH PCIe PortA */
+	PCI_INT(0x0, 0x15, 0x0, 0x10);
+	/* FCH PCIe PortB */
+	PCI_INT(0x0, 0x15, 0x1, 0x11);
+	/* FCH PCIe PortC */
+	PCI_INT(0x0, 0x15, 0x2, 0x12);
+	/* FCH PCIe PortD */
+	PCI_INT(0x0, 0x15, 0x3, 0x13);
+
+	/*Local Ints:   Type    Polarity    Trigger     Bus ID   IRQ    APIC ID PIN# */
+	IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0);
+	IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1);
+	/* There is no extension information... */
+
+	/* Compute the checksums */
+	return mptable_finalize(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+	void *v;
+	v = smp_write_floating_table(addr, 0);
+	return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/hp/abm/romstage.c b/src/mainboard/hp/abm/romstage.c
new file mode 100644
index 0000000..34d2012
--- /dev/null
+++ b/src/mainboard/hp/abm/romstage.c
@@ -0,0 +1,186 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <arch/stages.h>
+#include <device/pnp_def.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <console/console.h>
+#include <console/loglevel.h>
+#include <cpu/amd/car.h>
+#include "agesawrapper.h"
+#include <cpu/x86/bist.h>
+#include <cpu/x86/lapic.h>
+#include <southbridge/amd/agesa/hudson/hudson.h>
+#include <cpu/amd/agesa/s3_resume.h>
+#include <cbmem.h>
+#include <superio/nuvoton/common/nuvoton.h>
+#include <superio/nuvoton/nct5104d/nct5104d.h>
+
+#define SIO_PORT  0x4E
+#define SERIAL_DEV PNP_DEV(SIO_PORT, NCT5104D_SP4)
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+	u32 val, t32;
+	u32 *addr32;
+#if CONFIG_HAVE_ACPI_RESUME
+	void *resume_backup_memory;
+#endif
+
+	/* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for
+	 *  LpcClk[1:0]".  To be consistent with Parmer, setting to 4mA
+	 *  even though the register is not documented in the Kabini BKDG.
+	 *  Otherwise the serial output is bad code.
+	 */
+	//pm_iowrite( 0xD2, 0x00 );
+
+	val = agesawrapper_amdinitmmio();
+
+	hudson_lpc_port80();
+
+	/* Enable the AcpiMmio space */
+	outb(0x24, 0xcd6);
+	outb(0x01, 0xcd7);
+
+	/* Set auxiliary output clock frequency on OSCOUT1 pin to be 25MHz */
+	/* Set auxiliary output clock frequency on OSCOUT2 pin to be 48MHz */
+	addr32 = (u32 *)0xfed80e28;
+	t32 = *addr32;
+	t32 &= 0xffc0ffff; // Clr bits [21:19] & [18:16]
+	t32 |= 0x00010000; // Set bit 16 for 25MHz
+	*addr32 = t32;
+
+	/* Enable Auxiliary OSCOUT1/OSCOUT2 */
+	addr32 = (u32 *)0xfed80e40;
+	t32 = *addr32;
+	t32 &= 0xffffff7b; // clear 2, 7
+	*addr32 = t32;
+
+	if (!cpu_init_detectedx && boot_cpu()) {
+		post_code(0x30);
+		post_code(0x31);
+
+		nuvoton_enable_uartd(SERIAL_DEV);
+		nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+		console_init();
+	}
+
+	/* Halt if there was a built in self test failure */
+	post_code(0x34);
+	report_bist_failure(bist);
+
+	/* Load MPB */
+	val = cpuid_eax(1);
+	printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
+	printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
+
+	post_code(0x37);
+	val = agesawrapper_amdinitreset();
+	if(val) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitreset failed: %x \n", val);
+	}
+
+	post_code(0x38);
+	printk(BIOS_DEBUG, "Got past yangtze_early_setup\n");
+
+	post_code(0x39);
+
+	val = agesawrapper_amdinitearly ();
+	if(val) {
+		printk(BIOS_DEBUG, "agesawrapper_amdinitearly failed: %x \n", val);
+	}
+	printk(BIOS_DEBUG, "Got past agesawrapper_amdinitearly\n");
+
+#if CONFIG_HAVE_ACPI_RESUME
+	if (!acpi_is_wakeup_early()) { /* Check for S3 resume */
+#endif
+		post_code(0x40);
+		val = agesawrapper_amdinitpost ();
+		if(val) {
+			printk(BIOS_DEBUG, "agesawrapper_amdinitpost failed: %x \n", val);
+		}
+		printk(BIOS_DEBUG, "Got past agesawrapper_amdinitpost\n");
+
+		post_code(0x41);
+		val = agesawrapper_amdinitenv ();
+		if(val) {
+			printk(BIOS_DEBUG, "agesawrapper_amdinitenv failed: %x \n", val);
+		}
+		printk(BIOS_DEBUG, "Got past agesawrapper_amdinitenv\n");
+		/* TODO: Disable cache is not ok. */
+		disable_cache_as_ram();
+#if CONFIG_HAVE_ACPI_RESUME
+	} else { /* S3 detect */
+		printk(BIOS_INFO, "S3 detected\n");
+
+		post_code(0x60);
+		printk(BIOS_DEBUG, "agesawrapper_amdinitresume ");
+		val = agesawrapper_amdinitresume();
+		if (val)
+			printk(BIOS_DEBUG, "error level: %x \n", val);
+		else
+			printk(BIOS_DEBUG, "passed.\n");
+
+		printk(BIOS_DEBUG, "agesawrapper_amds3laterestore ");
+		val = agesawrapper_amds3laterestore ();
+		if (val)
+			printk(BIOS_DEBUG, "error level: %x \n", val);
+		else
+			printk(BIOS_DEBUG, "passed.\n");
+
+		post_code(0x61);
+		printk(BIOS_DEBUG, "Find resume memory location\n");
+		resume_backup_memory = (void *)backup_resume();
+
+		post_code(0x62);
+		printk(BIOS_DEBUG, "Move CAR stack.\n");
+		move_stack_high_mem();
+		printk(BIOS_DEBUG, "stack moved to: 0x%x\n", (u32) (resume_backup_memory + HIGH_MEMORY_SAVE));
+
+		post_code(0x63);
+		disable_cache_as_ram();
+		printk(BIOS_DEBUG, "CAR disabled.\n");
+		set_resume_cache();
+
+		/*
+		 * Copy the system memory that is in the ramstage area to the
+		 * reserved area.
+		 */
+		if (resume_backup_memory)
+			memcpy(resume_backup_memory, (void *)(CONFIG_RAMBASE), HIGH_MEMORY_SAVE);
+
+		printk(BIOS_DEBUG, "System memory saved. OK to load ramstage.\n");
+	}
+#endif
+
+	outb(0xEA, 0xCD6);
+	outb(0x1, 0xcd7);
+
+	post_code(0x50);
+	copy_and_run();
+
+	post_code(0x54);  /* Should never see this post code. */
+}



More information about the coreboot-gerrit mailing list