[coreboot-gerrit] Patch set updated for coreboot: ab664a8 AMD Lamar: Add a new AMD FP3 socket mainboard
Bruce Griffith (Bruce.Griffith@se-eng.com)
gerrit at coreboot.org
Tue Jun 10 13:50:48 CEST 2014
Bruce Griffith (Bruce.Griffith at se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/5968
-gerrit
commit ab664a809f8d19ed54600af4a78e0ba876bcc06c
Author: Bruce Griffith <Bruce.Griffith at se-eng.com>
Date: Tue Jun 10 05:10:19 2014 -0600
AMD Lamar: Add a new AMD FP3 socket mainboard
Add a new mainboard based on AMD's Family 15 Model 30 processor.
Change-Id: I2f73c396247239d54f978846e8958950697d7464
Signed-off-by: Bruce Griffith <Bruce.Griffith at se-eng.com>
---
src/mainboard/amd/Kconfig | 5 +
src/mainboard/amd/lamar/BiosCallOuts.c | 316 ++++++++++
src/mainboard/amd/lamar/BiosCallOuts.h | 40 ++
src/mainboard/amd/lamar/Kconfig | 97 +++
src/mainboard/amd/lamar/Makefile.inc | 28 +
src/mainboard/amd/lamar/OptionsIds.h | 113 ++++
src/mainboard/amd/lamar/PlatformGnbPcie.c | 164 +++++
src/mainboard/amd/lamar/PlatformGnbPcieComplex.h | 74 +++
src/mainboard/amd/lamar/acpi/AmdImc.asl | 97 +++
src/mainboard/amd/lamar/acpi/gpe.asl | 76 +++
src/mainboard/amd/lamar/acpi/mainboard.asl | 43 ++
src/mainboard/amd/lamar/acpi/routing.asl | 244 ++++++++
src/mainboard/amd/lamar/acpi/sata.asl | 20 +
src/mainboard/amd/lamar/acpi/si.asl | 28 +
src/mainboard/amd/lamar/acpi/sleep.asl | 103 ++++
src/mainboard/amd/lamar/acpi/superio.asl | 20 +
src/mainboard/amd/lamar/acpi/thermal.asl | 20 +
src/mainboard/amd/lamar/acpi/usb_oc.asl | 31 +
src/mainboard/amd/lamar/acpi_tables.c | 347 +++++++++++
src/mainboard/amd/lamar/agesawrapper.c | 740 +++++++++++++++++++++++
src/mainboard/amd/lamar/agesawrapper.h | 96 +++
src/mainboard/amd/lamar/board_info.txt | 5 +
src/mainboard/amd/lamar/buildOpts.c | 548 +++++++++++++++++
src/mainboard/amd/lamar/buildOpts.c.bak | 530 ++++++++++++++++
src/mainboard/amd/lamar/cmos.layout | 114 ++++
src/mainboard/amd/lamar/devicetree.cb | 113 ++++
src/mainboard/amd/lamar/dsdt.asl | 92 +++
src/mainboard/amd/lamar/get_bus_conf.c | 150 +++++
src/mainboard/amd/lamar/irq_tables.c | 112 ++++
src/mainboard/amd/lamar/mainboard.c | 51 ++
src/mainboard/amd/lamar/mptable.c | 205 +++++++
src/mainboard/amd/lamar/romstage.c | 168 +++++
32 files changed, 4790 insertions(+)
diff --git a/src/mainboard/amd/Kconfig b/src/mainboard/amd/Kconfig
index 80bd2b1..64c79d8 100644
--- a/src/mainboard/amd/Kconfig
+++ b/src/mainboard/amd/Kconfig
@@ -43,6 +43,10 @@ config BOARD_AMD_THATCHER
bool "Thatcher"
config BOARD_AMD_OLIVEHILL
bool "Olive Hill"
+config BOARD_AMD_LAMAR
+ bool "Lamar"
+config BOARD_AMD_BANTRY
+ bool "Bantry"
endchoice
source "src/mainboard/amd/db800/Kconfig"
@@ -65,6 +69,7 @@ source "src/mainboard/amd/union_station/Kconfig"
source "src/mainboard/amd/parmer/Kconfig"
source "src/mainboard/amd/thatcher/Kconfig"
source "src/mainboard/amd/olivehill/Kconfig"
+source "src/mainboard/amd/lamar/Kconfig"
config MAINBOARD_VENDOR
string
diff --git a/src/mainboard/amd/lamar/BiosCallOuts.c b/src/mainboard/amd/lamar/BiosCallOuts.c
new file mode 100644
index 0000000..f35a3b5
--- /dev/null
+++ b/src/mainboard/amd/lamar/BiosCallOuts.c
@@ -0,0 +1,316 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "agesawrapper.h"
+#include "amdlib.h"
+#include "BiosCallOuts.h"
+#include "Ids.h"
+#include "OptionsIds.h"
+#include "heapManager.h"
+#include "FchPlatform.h"
+#include "cbfs.h"
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+#include "imc.h"
+#endif
+
+STATIC CONST BIOS_CALLOUT_STRUCT BiosCallouts[] =
+{
+ {AGESA_ALLOCATE_BUFFER, fam15_0x30_AllocateBuffer },
+ {AGESA_DEALLOCATE_BUFFER, fam15_0x30_DeallocateBuffer },
+ {AGESA_DO_RESET, fam15_0x30_Reset },
+ {AGESA_LOCATE_BUFFER, fam15_0x30_LocateBuffer },
+ {AGESA_READ_SPD, fam15_0x30_ReadSpd },
+ {AGESA_READ_SPD_RECOVERY, fam15_0x30_DefaultRet },
+ {AGESA_RUNFUNC_ONAP, fam15_0x30_RunFuncOnAp },
+ {AGESA_GET_IDS_INIT_DATA, fam15_0x30_GetIdsInitData },
+ {AGESA_HOOKBEFORE_DQS_TRAINING, fam15_0x30_HookBeforeDQSTraining },
+ {AGESA_HOOKBEFORE_EXIT_SELF_REF, fam15_0x30_HookBeforeExitSelfRefresh },
+ {AGESA_FCH_OEM_CALLOUT, Fch_Oem_config },
+ {AGESA_GNB_GFX_GET_VBIOS_IMAGE, fam15_0x30_HookGfxGetVbiosImage }
+};
+
+AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
+{
+ UINTN i;
+ AGESA_STATUS CalloutStatus;
+ UINTN CallOutCount = sizeof (BiosCallouts) / sizeof (BiosCallouts [0]);
+
+ for (i = 0; i < CallOutCount; i++)
+ {
+ if (BiosCallouts[i].CalloutName == Func)
+ break;
+ }
+
+ if(i >= CallOutCount)
+ return AGESA_UNSUPPORTED;
+
+ CalloutStatus = BiosCallouts[i].CalloutPtr (Func, Data, ConfigPtr);
+
+ return CalloutStatus;
+}
+
+/**
+ * ALC272 Verb Table
+ */
+const CODEC_ENTRY Alc272_VerbTbl[] = {
+ {0x11, 0x411111F0},
+ {0x12, 0x411111F0},
+ {0x13, 0x411111F0},
+ {0x14, 0x411111F0},
+ {0x15, 0x411111F0},
+ {0x16, 0x411111F0},
+ {0x17, 0x411111F0},
+ {0x18, 0x01a19840},
+ {0x19, 0x411111F0},
+ {0x1a, 0x01813030},
+ {0x1b, 0x411111F0},
+ {0x1d, 0x40130605},
+ {0x1e, 0x01441120},
+ {0x21, 0x01211010},
+ {0xff, 0xffffffff}
+};
+
+const CODEC_TBL_LIST CodecTableList[] =
+{
+ {0x10ec0272, (CODEC_ENTRY*)&Alc272_VerbTbl[0]},
+ {(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
+};
+
+#define FAN_INPUT_INTERNAL_DIODE 0
+#define FAN_INPUT_TEMP0 1
+#define FAN_INPUT_TEMP1 2
+#define FAN_INPUT_TEMP2 3
+#define FAN_INPUT_TEMP3 4
+#define FAN_INPUT_TEMP0_FILTER 5
+#define FAN_INPUT_ZERO 6
+#define FAN_INPUT_DISABLED 7
+
+#define FAN_AUTOMODE (1 << 0)
+#define FAN_LINEARMODE (1 << 1)
+#define FAN_STEPMODE ~(1 << 1)
+#define FAN_POLARITY_HIGH (1 << 2)
+#define FAN_POLARITY_LOW ~(1 << 2)
+
+/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
+#define FREQ_28KHZ 0x0
+#define FREQ_25KHZ 0x1
+#define FREQ_23KHZ 0x2
+#define FREQ_21KHZ 0x3
+#define FREQ_29KHZ 0x4
+#define FREQ_18KHZ 0x5
+#define FREQ_100HZ 0xF7
+#define FREQ_87HZ 0xF8
+#define FREQ_58HZ 0xF9
+#define FREQ_44HZ 0xFA
+#define FREQ_35HZ 0xFB
+#define FREQ_29HZ 0xFC
+#define FREQ_22HZ 0xFD
+#define FREQ_14HZ 0xFE
+#define FREQ_11HZ 0xFF
+
+/* Hardware Monitor Fan Control
+ * Hardware limitation:
+ * HWM failed to read the input temperture vi I2C,
+ * if other software switch the I2C switch by mistake or intention.
+ * We recommend to using IMC to control Fans, instead of HWM.
+ */
+static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
+{
+ FCH_HWM_FAN_CTR oem_factl[5] = {
+ /*temperatuer input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
+ /* FanOUT0 Fan header J32 */
+ {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
+ /* FanOUT1 Fan header J31*/
+ {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
+ {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
+ {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
+ {FAN_INPUT_INTERNAL_DIODE, (FAN_STEPMODE | FAN_POLARITY_HIGH), FREQ_100HZ, 40, 60, 0, 40, 65, 85, 0, 0},
+ };
+ LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
+
+ /* Enable IMC fan control. the recommand way */
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+
+ imc_reg_init();
+
+ /* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
+
+ FchParams->Imc.ImcEnable = TRUE;
+ FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
+ FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
+
+ LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
+
+ /* Thermal Zone Parameter */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; //BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00;//6 | BIT3;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2;
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0;
+
+ /* IMC Fan Policy temperature thresholds */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0;///80; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
+
+ /* IMC Fan Policy PWM Settings */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00; /* AL7 percentage */
+
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55;//BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
+
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
+ FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
+
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
+ FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
+
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
+
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0;//BIT0 | BIT2 | BIT5;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
+ FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
+
+ /* IMC Function */
+ FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;//BIT0 | BIT4 |BIT8;
+
+ /* NOTE:
+ * FchInitLateHwm will overwrite the EcStruct with EcDefaultMassege,
+ * AGESA put EcDefaultMassege as global data in ROM, so we can't overwride it.
+ * so we remove it from AGESA code. Please Seee FchInitLateHwm.
+ */
+
+#else /* HWM fan control, the way not recommand */
+ FchParams->Imc.ImcEnable = FALSE;
+ FchParams->Hwm.HwMonitorEnable = TRUE;
+ FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
+
+#endif /* CONFIG_HUDSON_IMC_FWM */
+}
+
+/**
+ * Fch Oem setting callback
+ *
+ * Configure platform specific Hudson device,
+ * such Azalia, SATA, IMC etc.
+ */
+AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr)
+{
+ FCH_RESET_DATA_BLOCK *FchParams = (FCH_RESET_DATA_BLOCK *)FchData;
+
+ if (FchParams->StdHeader->Func == AMD_INIT_RESET) {
+ FCH_RESET_DATA_BLOCK *FchParams_reset = (FCH_RESET_DATA_BLOCK *) FchData;
+ printk(BIOS_DEBUG, "Fch OEM config in INIT RESET ");
+ //FchParams_reset->EcChannel0 = TRUE; /* logical devicd 3 */
+#if CONFIG_HUDSON_LEGACY_FREE
+ FchParams_reset->LegacyFree = 1;
+#endif
+
+ } else if (FchParams->StdHeader->Func == AMD_INIT_ENV) {
+ FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData;
+ printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
+
+ /* Azalia Controller OEM Codec Table Pointer */
+ FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]);
+ /* Azalia Controller Front Panel OEM Table Pointer */
+
+ /* Fan Control */
+ oem_fan_control(FchParams_env);
+
+ /* XHCI configuration */
+#if CONFIG_HUDSON_XHCI_ENABLE
+ FchParams_env->Usb.Xhci0Enable = TRUE;
+#else
+ FchParams_env->Usb.Xhci0Enable = FALSE;
+#endif
+ FchParams_env->Usb.Xhci1Enable = FALSE;
+
+ /* sata configuration */
+ }
+ printk(BIOS_DEBUG, "Done\n");
+
+ return AGESA_SUCCESS;
+}
diff --git a/src/mainboard/amd/lamar/BiosCallOuts.h b/src/mainboard/amd/lamar/BiosCallOuts.h
new file mode 100644
index 0000000..3c99a5b
--- /dev/null
+++ b/src/mainboard/amd/lamar/BiosCallOuts.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _BIOS_CALLOUT_H_
+#define _BIOS_CALLOUT_H_
+
+#include <northbridge/amd/agesa/def_callouts.h>
+#include <northbridge/amd/agesa/family15_0x30/fam15_0x30_callouts.h>
+
+/* CALLOUT Initialization */
+AGESA_STATUS GetBiosCallout (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
+
+/* FCH OEM Config*/
+AGESA_STATUS Fch_Oem_config(UINT32 Func, UINT32 FchData, VOID *ConfigPtr);
+
+#define SB_GPIO_REG02 2
+#define SB_GPIO_REG09 9
+#define SB_GPIO_REG10 10
+#define SB_GPIO_REG15 15
+#define SB_GPIO_REG17 17
+#define SB_GPIO_REG21 21
+#define SB_GPIO_REG25 25
+#define SB_GPIO_REG28 28
+#endif //_BIOS_CALLOUT_H_
diff --git a/src/mainboard/amd/lamar/Kconfig b/src/mainboard/amd/lamar/Kconfig
new file mode 100644
index 0000000..e11614a
--- /dev/null
+++ b/src/mainboard/amd/lamar/Kconfig
@@ -0,0 +1,97 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+if BOARD_AMD_LAMAR
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select CPU_AMD_AGESA_FAMILY15_KV
+ select NORTHBRIDGE_AMD_AGESA_FAMILY15_KV
+ select SOUTHBRIDGE_AMD_AGESA_HUDSON
+ select SUPERIO_FINTEK_F81216H
+ select HAVE_OPTION_TABLE
+ select HAVE_PIRQ_TABLE
+ select HAVE_MP_TABLE
+ select HAVE_ACPI_RESUME
+ select HAVE_ACPI_TABLES
+ select BOARD_ROMSIZE_KB_8192
+ select GFXUMA
+ select UDELAY_LAPIC
+
+config MAINBOARD_DIR
+ string
+ default amd/lamar
+
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "DB-FP3"
+
+config MAINBOARD_SERIAL_NUMBER
+ string
+ default "52198A"
+
+config HW_MEM_HOLE_SIZEK
+ hex
+ default 0x200000
+
+config MAX_CPUS
+ int
+ default 4
+
+
+config HW_MEM_HOLE_SIZE_AUTO_INC
+ bool
+ default n
+
+
+config IRQ_SLOT_COUNT
+ int
+ default 11
+
+config RAMTOP
+ hex
+ default 0x1000000
+
+config HEAP_SIZE
+ hex
+ default 0xc0000
+
+
+config RAMBASE
+ hex
+ default 0x200000
+
+config ONBOARD_VGA_IS_PRIMARY
+ bool
+ default y
+
+config WARNINGS_ARE_ERRORS
+ bool
+ default n
+
+config HUDSON_LEGACY_FREE
+ bool
+ default y
+
+config HUDSON_XHCI_FWM_FILE
+ string
+ default "3rdparty/southbridge/amd/bolton/xhci.bin"
+
+endif # BOARD_AMD_LAMAR
diff --git a/src/mainboard/amd/lamar/Makefile.inc b/src/mainboard/amd/lamar/Makefile.inc
new file mode 100644
index 0000000..4a764e2
--- /dev/null
+++ b/src/mainboard/amd/lamar/Makefile.inc
@@ -0,0 +1,28 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+
+romstage-$(CONFIG_CPU_AMD_AGESA_OPENSOURCE) += buildOpts.c
+romstage-y += agesawrapper.c
+romstage-y += BiosCallOuts.c
+romstage-y += PlatformGnbPcie.c
+
+ramstage-$(CONFIG_CPU_AMD_AGESA_OPENSOURCE) += buildOpts.c
+ramstage-y += agesawrapper.c
+ramstage-y += BiosCallOuts.c
+ramstage-y += PlatformGnbPcie.c
diff --git a/src/mainboard/amd/lamar/OptionsIds.h b/src/mainboard/amd/lamar/OptionsIds.h
new file mode 100644
index 0000000..49fcdf3
--- /dev/null
+++ b/src/mainboard/amd/lamar/OptionsIds.h
@@ -0,0 +1,113 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/**
+ * @file
+ *
+ * IDS Option File
+ *
+ * This file is used to switch on/off IDS features.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Core
+ * @e \$Revision: 192403 $ @e \$Date: 2012-12-12 15:46:25 -0600 (Wed, 12 Dec 2012) $
+ */
+#ifndef _OPTION_IDS_H_
+#define _OPTION_IDS_H_
+
+/**
+ *
+ * This file generates the defaults tables for the Integrated Debug Support
+ * Module. The documented build options are imported from a user controlled
+ * file for processing. The build options for the Integrated Debug Support
+ * Module are listed below:
+ *
+ * IDSOPT_IDS_ENABLED
+ * IDSOPT_ERROR_TRAP_ENABLED
+ * IDSOPT_CONTROL_ENABLED
+ *
+ * Warning: When you enable the IDSOPT_CONTROL_NV_TO_CMOS feature.
+ * please make the cmos region defined by IDS_OPT_CMOS_REGION_START &
+ * IDS_OPT_CMOS_REGION_END can be touched between IDS HOOK point
+ * IDS_CPU_Early_Override and IDS_BEFORE_AP_EARLY_HALT of BSP
+ *
+ * IDSOPT_CONTROL_NV_TO_CMOS
+ * IDS_OPT_CMOS_INDEX_PORT
+ * IDS_OPT_CMOS_DATA_PORT
+ * IDS_OPT_CMOS_REGION_START
+ * IDS_OPT_CMOS_REGION_END
+ *
+ * IDSOPT_TRACING_ENABLED
+ * IDSOPT_TRACING_CONSOLE_HDTOUT
+ * IDSOPT_TRACING_CONSOLE_SERIALPORT
+ * IDSOPT_SERIAL_PORT (default 0x3F8)
+ * IDSOPT_TRACING_CONSOLE_REDIRECT_IO
+ * IDSOPT_DEBUG_PRINT_IO_PORT (default 0x80)
+ * IDSOPT_TRACING_CONSOLE_RAM
+ * IDSOPT_DPRAM_BASE
+ * IDSOPT_DPRAM_SIZE
+ * IDSOPT_DPRAM_STOP_LOGGING_WHEN_BUFFER_FULL (default FALSE)
+ * IDSOPT_CUSTOMIZE_TRACING_SERVICE
+ * IDSOPT_CUSTOMIZE_TRACING_SERVICE_INIT
+ * IDSOPT_CUSTOMIZE_TRACING_SERVICE_EXIT
+ *
+ * IDSOPT_TRACE_BLD_CFG
+ * IDSOPT_PERF_ANALYSIS
+ * IDSOPT_ASSERT_ENABLED
+ * IDS_DEBUG_PORT
+ * IDSOPT_CAR_CORRUPTION_CHECK_ENABLED
+ * IDSOPT_DEBUG_CODE_ENABLED
+ * IDSOPT_IDT_EXCEPTION_TRAP
+ * IDSOPT_C_OPTIMIZATION_DISABLED
+ *
+ **/
+
+#define IDSOPT_IDS_ENABLED FALSE
+//#define IDSOPT_ERROR_TRAP_ENABLED FALSE
+//#define IDSOPT_CONTROL_ENABLED FALSE
+#define IDSOPT_TRACING_ENABLED FALSE
+#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE
+#ifdef IDS_DEBUG_PRINT_MASK
+#undef IDS_DEBUG_PRINT_MASK
+#endif
+#define IDS_DEBUG_PRINT_MASK (GNB_TRACE_DEFAULT | CPU_TRACE_ALL | MEM_STATUS | MEM_FLOW | TOPO_TRACE_ALL | FCH_TRACE_ALL | MAIN_FLOW | IDS_TRACE_DEFAULT | TEST_POINT)
+#define IDSOPT_SERIAL_PORT 0x3F8
+#define IDSOPT_HEAP_CHECKING TRUE
+#define IDSOPT_TRACE_BLD_CFG TRUE
+#define IDSOPT_CAR_CORRUPTION_CHECK_ENABLED TRUE
+#define IDSOPT_DEBUG_CODE_ENABLED TRUE
+#define IDSOPT_C_OPTIMIZATION_DISABLED TRUE
+
+#if IS_ENABLED(CONFIG_CPU_AMD_AGESA_BINARY_PI)
+static
+__attribute__((optimize("Os")))
+__inline__ __attribute__((always_inline))
+BOOLEAN
+IdsErrorStop (
+ IN UINT32 filecode
+ )
+{
+ IDS_DEADLOOP();
+ return FALSE;
+}
+#endif
+
+#endif
diff --git a/src/mainboard/amd/lamar/PlatformGnbPcie.c b/src/mainboard/amd/lamar/PlatformGnbPcie.c
new file mode 100644
index 0000000..f86b3ed
--- /dev/null
+++ b/src/mainboard/amd/lamar/PlatformGnbPcie.c
@@ -0,0 +1,164 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include "AGESA.h"
+#include "amdlib.h"
+#include "Ids.h"
+#include "heapManager.h"
+#include "PlatformGnbPcieComplex.h"
+#include "Filecode.h"
+
+#define FILECODE PROC_GNB_PCIE_FAMILY_0X15_F15PCIECOMPLEXCONFIG_FILECODE
+
+PCIe_PORT_DESCRIPTOR PortList [] = {
+
+ /*
+ * Lanes to pins to PCI device mapping can be found in section 2.12 of the
+ * BIOS and Kernel Developer's Guide for AMD Family 15h Models 30h-3Fh
+ */
+
+ { /* PCIe x16 Connector J119, DP4/5/6, GFX[15:0], Lanes [31:16], PCI 00:02.1 */
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 16, 31),
+ PCIE_PORT_DATA_INITIALIZER_V2 (
+ PortEnabled,
+ ChannelTypeExt6db, 0, 0,
+ HotplugDisabled,
+ PcieGenMaxSupported, PcieGenMaxSupported,
+ AspmDisabled,
+ 175,
+ 0
+ )
+ },
+
+ { /* PCIe x4 Connector J118, GPP[3:0], Lanes [11:8] */
+ #if !PCIE_DP4_MUX
+ DESCRIPTOR_TERMINATE_LIST,
+ #else
+ 0,
+ #endif
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 8, 11),
+ PCIE_PORT_DATA_INITIALIZER_V2 (
+ PortEnabled,
+ ChannelTypeExt6db, 0, 0,
+ HotplugDisabled,
+ PcieGenMaxSupported, PcieGenMaxSupported,
+ AspmDisabled,
+ 176,
+ 0
+ )
+ },
+
+ #if PCIE_DP4_MUX
+ { /* PCIe x4 Connector J120, GPP[7:4], Lanes [15:12] */
+ DESCRIPTOR_TERMINATE_LIST,
+ PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 12, 15),
+ PCIE_PORT_DATA_INITIALIZER_V2 (
+ PortEnabled,
+ ChannelTypeExt6db, 0, 0,
+ HotplugDisabled,
+ PcieGenMaxSupported, PcieGenMaxSupported,
+ AspmDisabled,
+ 177,
+ 0
+ )
+ },
+ #endif
+
+ /*
+ * ALLOW UMI LINK TO DEFAULT, DO NOT SPECIFY EXPLICITLY
+ */
+// { /* UMI Link to Bolton, Device ID 0x1424, PCI 00:04.1 */
+// DESCRIPTOR_TERMINATE_LIST,
+// PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 0, 3),
+// PCIE_PORT_DATA_INITIALIZER_V2 (
+// PortEnabled,
+// ChannelTypeExt6db, 0, 0,
+// HotplugDisabled,
+// PcieGen2, PcieGen2,
+// AspmDisabled,
+// 1,
+// 1
+// )
+// },
+
+};
+
+PCIe_DDI_DESCRIPTOR DdiList [] = {
+ #if 1
+ { /* DP0 */
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 4, 7),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1)
+ },
+ #endif
+ #if !PCIE_DP4_MUX
+ { /* DP3 */
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux4, Hdp4)
+ },
+ #endif
+ #if 1
+ { /* DP1 */
+ 0,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 32, 35),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2)
+ },
+ #endif
+ #if 1
+ { /* DP2 */
+ DESCRIPTOR_TERMINATE_LIST,
+ PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 36, 39),
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux3, Hdp3),
+ },
+ #endif
+};
+
+PCIe_COMPLEX_DESCRIPTOR PcieComplex = {
+ .Flags = DESCRIPTOR_TERMINATE_LIST,
+ .SocketId = 0,
+ .PciePortList = PortList,
+ .DdiLinkList = DdiList
+};
+
+/*---------------------------------------------------------------------------------------*/
+/**
+ * OemCustomizeInitEarly
+ *
+ * Description:
+ * This stub function will call the host environment through the binary block
+ * interface (call-out port) to provide a user hook opportunity
+ *
+ * Parameters:
+ * @param[in] **PeiServices
+ * @param[in] *InitEarly
+ *
+ * @retval VOID
+ *
+ **/
+/*---------------------------------------------------------------------------------------*/
+VOID
+OemCustomizeInitEarly (
+ IN OUT AMD_EARLY_PARAMS *InitEarly
+ )
+{
+ InitEarly->GnbConfig.PcieComplexList = &PcieComplex;
+}
diff --git a/src/mainboard/amd/lamar/PlatformGnbPcieComplex.h b/src/mainboard/amd/lamar/PlatformGnbPcieComplex.h
new file mode 100644
index 0000000..6944f90
--- /dev/null
+++ b/src/mainboard/amd/lamar/PlatformGnbPcieComplex.h
@@ -0,0 +1,74 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _PLATFORM_GNB_PCIE_COMPLEX_H
+#define _PLATFORM_GNB_PCIE_COMPLEX_H
+
+#include "Porting.h"
+#include "AGESA.h"
+#include "amdlib.h"
+
+//GNB GPP Port4
+#define GNB_GPP_PORT4_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT4_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT4_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT4_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT4_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+//GNB GPP Port5
+#define GNB_GPP_PORT5_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT5_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT5_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT5_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT5_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+//GNB GPP Port6
+#define GNB_GPP_PORT6_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT6_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT6_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT6_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT6_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+//GNB GPP Port7
+#define GNB_GPP_PORT7_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT7_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT7_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT7_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT7_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+//GNB GPP Port8
+#define GNB_GPP_PORT8_PORT_PRESENT 1 //0:Disable 1:Enable
+#define GNB_GPP_PORT8_SPEED_MODE 2 //0:Auto 1:GEN1 2:GEN2
+#define GNB_GPP_PORT8_LINK_ASPM 3 //0:Disable 1:L0s 2:L1 3:L0s+L1
+#define GNB_GPP_PORT8_CHANNEL_TYPE 4 //0:LowLoss(-3.5db) 1:HighLoss(-6db) 2:Half-swing(0db)
+ //3:Half-swing(-3.5db) 4:extended length (-6db) 5:extended length(-8db)
+#define GNB_GPP_PORT8_HOTPLUG_SUPPORT 0 //0:Disable 1:Basic 3:Enhanced
+
+VOID
+OemCustomizeInitEarly (
+ IN OUT AMD_EARLY_PARAMS *InitEarly
+ );
+
+#define PCIE_DP4_MUX 0 /* 1:pcie 0: dp4*/
+
+#endif //_PLATFORM_GNB_PCIE_COMPLEX_H
diff --git a/src/mainboard/amd/lamar/acpi/AmdImc.asl b/src/mainboard/amd/lamar/acpi/AmdImc.asl
new file mode 100644
index 0000000..f55a12a
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/AmdImc.asl
@@ -0,0 +1,97 @@
+//BTDC Due to IMC Fan, ACPI control codes
+OperationRegion(IMIO, SystemIO, 0x3E, 0x02)
+Field(IMIO , ByteAcc, NoLock, Preserve) {
+ IMCX,8,
+ IMCA,8
+}
+
+IndexField(IMCX, IMCA, ByteAcc, NoLock, Preserve) {
+ Offset(0x80),
+ MSTI, 8,
+ MITS, 8,
+ MRG0, 8,
+ MRG1, 8,
+ MRG2, 8,
+ MRG3, 8,
+}
+
+Method(WACK, 0)
+{
+ Store(0, Local0)
+ Store(50, Local1)
+ While (LAnd (LNotEqual(Local0, 0xFA), LGreater(Local1,0))) {
+ Store(MRG0, Local0)
+ Sleep(10)
+ Decrement(Local1)
+ }
+}
+
+//Init
+Method (ITZE, 0)
+{
+ Store(0, MRG0)
+ Store(0xB5, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(0, MRG2)
+ Store(0x80, MSTI)
+ WACK()
+
+ Or(MRG2, 0x01, Local0)
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(Local0, MRG2)
+ Store(0x81, MSTI)
+ WACK()
+}
+
+//Sleep
+Method (IMSP, 0)
+{
+ Store(0, MRG0)
+ Store(0xB5, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(1, MRG1)
+ Store(0, MRG2)
+ Store(0x98, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(0xB4, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+}
+
+//Wake
+Method (IMWK, 0)
+{
+ Store(0, MRG0)
+ Store(0xB5, MRG1)
+ Store(0, MRG2)
+ Store(0x96, MSTI)
+ WACK()
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(0, MRG2)
+ Store(0x80, MSTI)
+ WACK()
+
+ Or(MRG2, 0x01, Local0)
+
+ Store(0, MRG0)
+ Store(0, MRG1)
+ Store(Local0, MRG2)
+ Store(0x81, MSTI)
+ WACK()
+}
diff --git a/src/mainboard/amd/lamar/acpi/gpe.asl b/src/mainboard/amd/lamar/acpi/gpe.asl
new file mode 100644
index 0000000..cb222f4
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/gpe.asl
@@ -0,0 +1,76 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+Scope(\_GPE) { /* Start Scope GPE */
+
+ /* General event 3 */
+ Method(_L03) {
+ /* DBGO("\\_GPE\\_L00\n") */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* Legacy PM event */
+ Method(_L08) {
+ /* DBGO("\\_GPE\\_L08\n") */
+ }
+
+ /* Temp warning (TWarn) event */
+ Method(_L09) {
+ /* DBGO("\\_GPE\\_L09\n") */
+ /* Notify (\_TZ.TZ00, 0x80) */
+ }
+
+ /* USB controller PME# */
+ Method(_L0B) {
+ /* DBGO("\\_GPE\\_L0B\n") */
+ Notify(\_SB.PCI0.UOH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH2, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH3, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH5, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UOH6, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PCI0.UEH1, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* ExtEvent0 SCI event */
+ Method(_L10) {
+ /* DBGO("\\_GPE\\_L10\n") */
+ }
+
+
+ /* ExtEvent1 SCI event */
+ Method(_L11) {
+ /* DBGO("\\_GPE\\_L11\n") */
+ }
+
+ /* GPIO0 or GEvent8 event */
+ Method(_L18) {
+ /* DBGO("\\_GPE\\_L18\n") */
+ Notify(\_SB.PCI0.PBR4, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+
+ /* Azalia SCI event */
+ Method(_L1B) {
+ /* DBGO("\\_GPE\\_L1B\n") */
+ Notify(\_SB.PCI0.AZHD, 0x02) /* NOTIFY_DEVICE_WAKE */
+ Notify(\_SB.PWRB, 0x02) /* NOTIFY_DEVICE_WAKE */
+ }
+} /* End Scope GPE */
diff --git a/src/mainboard/amd/lamar/acpi/mainboard.asl b/src/mainboard/amd/lamar/acpi/mainboard.asl
new file mode 100644
index 0000000..c85a6e4
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/mainboard.asl
@@ -0,0 +1,43 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+ /* Data to be patched by the BIOS during POST */
+ /* FIXME the patching is not done yet! */
+ /* Memory related values */
+ Name(LOMH, 0x0) /* Start of unused memory in C0000-E0000 range */
+ Name(PBAD, 0x0) /* Address of BIOS area (If TOM2 != 0, Addr >> 16) */
+ Name(PBLN, 0x0) /* Length of BIOS area */
+
+ Name(PCBA, CONFIG_MMCONF_BASE_ADDRESS) /* Base address of PCIe config space */
+ Name(PCLN, Multiply(0x100000, CONFIG_MMCONF_BUS_NUMBER)) /* Length of PCIe config space, 1MB each bus */
+ Name(HPBA, 0xFED00000) /* Base address of HPET table */
+
+ Name(SSFG, 0x0D) /* S1 support: bit 0, S2 Support: bit 1, etc. S0 & S5 assumed */
+
+ /* Some global data */
+ Name(OSTP, 3) /* Assume nothing. WinXp = 1, Vista = 2, Linux = 3, WinCE = 4 */
+ Name(OSV, Ones) /* Assume nothing */
+ Name(PMOD, One) /* Assume APIC */
+
+ /* AcpiGpe0Blk */
+ OperationRegion(GP0B, SystemMemory, 0xfed80814, 0x04)
+ Field(GP0B, ByteAcc, NoLock, Preserve) {
+ , 11,
+ USBS, 1,
+ }
diff --git a/src/mainboard/amd/lamar/acpi/routing.asl b/src/mainboard/amd/lamar/acpi/routing.asl
new file mode 100644
index 0000000..1994a57
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/routing.asl
@@ -0,0 +1,244 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+ /* Routing is in System Bus scope */
+ Name(PR0, Package(){
+ /* NB devices */
+ /* Bus 0, Dev 0 - F15 Host Controller */
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+ Package(){0x0001FFFF, 0, INTB, 0 },
+ Package(){0x0001FFFF, 1, INTC, 0 },
+
+ /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
+ Package(){0x0002FFFF, 0, INTC, 0 },
+ Package(){0x0002FFFF, 1, INTD, 0 },
+ Package(){0x0002FFFF, 2, INTA, 0 },
+ Package(){0x0002FFFF, 3, INTB, 0 },
+
+ /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+ Package(){0x0003FFFF, 0, INTD, 0 },
+ Package(){0x0003FFFF, 1, INTA, 0 },
+ Package(){0x0003FFFF, 2, INTB, 0 },
+ Package(){0x0003FFFF, 3, INTC, 0 },
+
+ /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+ Package(){0x0004FFFF, 0, INTA, 0 },
+ Package(){0x0004FFFF, 1, INTB, 0 },
+ Package(){0x0004FFFF, 2, INTC, 0 },
+ Package(){0x0004FFFF, 3, INTD, 0 },
+
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */
+ Package(){0x0014FFFF, 0, INTA, 0 },
+ Package(){0x0014FFFF, 1, INTB, 0 },
+ Package(){0x0014FFFF, 2, INTC, 0 },
+ Package(){0x0014FFFF, 3, INTD, 0 },
+
+ /* SB devices */
+ /* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0
+ * EHCI @ func 2 */
+ Package(){0x0012FFFF, 0, INTC, 0 },
+ Package(){0x0012FFFF, 1, INTB, 0 },
+
+ Package(){0x0013FFFF, 0, INTC, 0 },
+ Package(){0x0013FFFF, 1, INTB, 0 },
+
+ Package(){0x0016FFFF, 0, INTC, 0 },
+ Package(){0x0016FFFF, 1, INTB, 0 },
+
+ /* Bus 0, Dev 16 - USB: XHCI func 0, 1 */
+ Package(){0x0010FFFF, 0, INTC, 0 },
+ Package(){0x0010FFFF, 1, INTB, 0 },
+
+ /* Bus 0, Dev 17 - SATA controller */
+ Package(){0x0011FFFF, 0, INTD, 0 },
+
+ /* Bus 0, Dev 21 Pcie Bridge */
+ Package(){0x0015FFFF, 0, INTA, 0 },
+ Package(){0x0015FFFF, 1, INTB, 0 },
+ Package(){0x0015FFFF, 2, INTC, 0 },
+ Package(){0x0015FFFF, 3, INTD, 0 },
+ })
+
+ Name(APR0, Package(){
+ /* NB devices in APIC mode */
+ /* Bus 0, Dev 0 - F15 Host Controller */
+
+ /* Bus 0, Dev 1 - PCI Bridge for Internal Graphics(IGP) */
+ Package(){0x0001FFFF, 0, 0, 17 },
+ Package(){0x0001FFFF, 1, 0, 18 },
+
+ /* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
+ Package(){0x0002FFFF, 0, 0, 18 },
+ Package(){0x0002FFFF, 1, 0, 19 },
+ Package(){0x0002FFFF, 2, 0, 16 },
+ Package(){0x0002FFFF, 3, 0, 17 },
+
+ /* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
+ Package(){0x0003FFFF, 0, 0, 19 },
+ Package(){0x0003FFFF, 1, 0, 16 },
+ Package(){0x0003FFFF, 2, 0, 17 },
+ Package(){0x0003FFFF, 3, 0, 18 },
+
+ /* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
+ Package(){0x0004FFFF, 0, 0, 16 },
+ Package(){0x0004FFFF, 1, 0, 17 },
+ Package(){0x0004FFFF, 2, 0, 18 },
+ Package(){0x0004FFFF, 3, 0, 19 },
+
+ /* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
+ /* Bus 0, Dev 6 - General purpose PCIe bridge 6 */
+ /* Bus 0, Dev 7 - PCIe Bridge for network card */
+ /* Bus 0, Dev 8 - Southbridge port (normally hidden) */
+
+ /* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
+ Package(){0x0014FFFF, 0, 0, 16 },
+ Package(){0x0014FFFF, 1, 0, 17 },
+ Package(){0x0014FFFF, 2, 0, 18 },
+ Package(){0x0014FFFF, 3, 0, 19 },
+
+ /* SB devices in APIC mode */
+ /* Bus 0, Dev 18,19,22 - USB: OHCI @ func 0
+ * EHCI @ func 2 */
+ Package(){0x0012FFFF, 0, 0, 18 },
+ Package(){0x0012FFFF, 1, 0, 17 },
+
+ Package(){0x0013FFFF, 0, 0, 18 },
+ Package(){0x0013FFFF, 1, 0, 17 },
+
+ Package(){0x0016FFFF, 0, 0, 18 },
+ Package(){0x0016FFFF, 1, 0, 17 },
+
+ /* Bus 0, Dev 16 - USB: XHCI func 0, 1 */
+ Package(){0x0010FFFF, 0, 0, 0x12},
+ Package(){0x0010FFFF, 1, 0, 0x11},
+
+ /* Bus 0, Dev 17 - SATA controller */
+ Package(){0x0011FFFF, 0, 0, 19 },
+
+ /* Bus0, Dev 21 PCIE Bridge */
+ Package(){0x0015FFFF, 0, 0, 16 },
+ Package(){0x0015FFFF, 1, 0, 17 },
+ Package(){0x0015FFFF, 2, 0, 18 },
+ Package(){0x0015FFFF, 3, 0, 19 },
+ })
+
+ Name(PS2, Package(){
+ /* The external GFX - Hooked to PCIe slot 2 */
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+ })
+ Name(APS2, Package(){
+ /* The external GFX - Hooked to PCIe slot 2 */
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PS4, Package(){
+ /* PCIe slot - Hooked to PCIe slot 4 */
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+ })
+ Name(APS4, Package(){
+ /* PCIe slot - Hooked to PCIe slot 4 */
+ Package(){0x0000FFFF, 0, 0, 16 },
+ Package(){0x0000FFFF, 1, 0, 17 },
+ Package(){0x0000FFFF, 2, 0, 18 },
+ Package(){0x0000FFFF, 3, 0, 19 },
+ })
+
+ Name(PE0, Package(){
+ /* PCIe slot - Hooked to PCIe Bridge 0*/
+ Package(){0x0000FFFF, 0, INTA, 0 },
+ Package(){0x0000FFFF, 1, INTB, 0 },
+ Package(){0x0000FFFF, 2, INTC, 0 },
+ Package(){0x0000FFFF, 3, INTD, 0 },
+ })
+ Name(APE0, Package(){
+ /* PCIe slot - Hooked to PCIe Bridge 0*/
+ Package(){0x0000FFFF, 0, 0, 16 },
+ Package(){0x0000FFFF, 1, 0, 17 },
+ Package(){0x0000FFFF, 2, 0, 18 },
+ Package(){0x0000FFFF, 3, 0, 19 },
+ })
+
+ Name(PE1, Package(){
+ /* PCIe slot - Hooked to PCIe Bridge 1*/
+ Package(){0x0000FFFF, 0, INTB, 0 },
+ Package(){0x0000FFFF, 1, INTC, 0 },
+ Package(){0x0000FFFF, 2, INTD, 0 },
+ Package(){0x0000FFFF, 3, INTA, 0 },
+ })
+ Name(APE1, Package(){
+ /* PCIe slot - Hooked to PCIe Bridge 1*/
+ Package(){0x0000FFFF, 0, 0, 17 },
+ Package(){0x0000FFFF, 1, 0, 18 },
+ Package(){0x0000FFFF, 2, 0, 19 },
+ Package(){0x0000FFFF, 3, 0, 16 },
+ })
+
+ Name(PE2, Package(){
+ /* PCIe slot - Hooked to PCIe Bridge 2*/
+ Package(){0x0000FFFF, 0, INTC, 0 },
+ Package(){0x0000FFFF, 1, INTD, 0 },
+ Package(){0x0000FFFF, 2, INTA, 0 },
+ Package(){0x0000FFFF, 3, INTB, 0 },
+ })
+ Name(APE2, Package(){
+ /* PCIe slot - Hooked to PCIe Bridge 2*/
+ Package(){0x0000FFFF, 0, 0, 18 },
+ Package(){0x0000FFFF, 1, 0, 19 },
+ Package(){0x0000FFFF, 2, 0, 16 },
+ Package(){0x0000FFFF, 3, 0, 17 },
+ })
+
+ Name(PE3, Package(){
+ /* PCIe slot - Hooked to PCIe Bridge 3 */
+ Package(){0x0000FFFF, 0, INTD, 0 },
+ Package(){0x0000FFFF, 1, INTA, 0 },
+ Package(){0x0000FFFF, 2, INTB, 0 },
+ Package(){0x0000FFFF, 3, INTC, 0 },
+ })
+ Name(APE3, Package(){
+ /* PCIe slot - Hooked to PCIe Bridge 3*/
+ Package(){0x0000FFFF, 0, 0, 19 },
+ Package(){0x0000FFFF, 1, 0, 16 },
+ Package(){0x0000FFFF, 2, 0, 17 },
+ Package(){0x0000FFFF, 3, 0, 18 },
+ })
+
+ /* SB PCI Bridge J21, J22 */
+ Name(PCIB, Package(){
+ /* PCI slots: slot 0, slot 1, slot 2 behind Dev14, Fun4. */
+ Package(){0x0005FFFF, 0, 0, 0x14 },
+ Package(){0x0005FFFF, 1, 0, 0x15 },
+ Package(){0x0005FFFF, 2, 0, 0x16 },
+ Package(){0x0005FFFF, 3, 0, 0x17 },
+
+ Package(){0x0006FFFF, 0, 0, 0x15 },
+ Package(){0x0006FFFF, 1, 0, 0x16 },
+ Package(){0x0006FFFF, 2, 0, 0x17 },
+ Package(){0x0006FFFF, 3, 0, 0x14 },
+ })
diff --git a/src/mainboard/amd/lamar/acpi/sata.asl b/src/mainboard/amd/lamar/acpi/sata.asl
new file mode 100644
index 0000000..542093e
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/sata.asl
@@ -0,0 +1,20 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* No SATA functionality */
diff --git a/src/mainboard/amd/lamar/acpi/si.asl b/src/mainboard/amd/lamar/acpi/si.asl
new file mode 100644
index 0000000..aa49616
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/si.asl
@@ -0,0 +1,28 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+ Scope(\_SI) {
+ Method(_SST, 1) {
+ /* DBGO("\\_SI\\_SST\n") */
+ /* DBGO(" New Indicator state: ") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+ }
+ } /* End Scope SI */
+
+
diff --git a/src/mainboard/amd/lamar/acpi/sleep.asl b/src/mainboard/amd/lamar/acpi/sleep.asl
new file mode 100644
index 0000000..fcce35e
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/sleep.asl
@@ -0,0 +1,103 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* Wake status package */
+Name(WKST,Package(){Zero, Zero})
+
+/*
+* \_PTS - Prepare to Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2, etc
+*
+* Exit:
+* -none-
+*
+* The _PTS control method is executed at the beginning of the sleep process
+* for S1-S5. The sleeping value is passed to the _PTS control method. This
+* control method may be executed a relatively long time before entering the
+* sleep state and the OS may abort the operation without notification to
+* the ACPI driver. This method cannot modify the configuration or power
+* state of any device in the system.
+*/
+Method(\_PTS, 1) {
+ /* DBGO("\\_PTS\n") */
+ /* DBGO("From S0 to S") */
+ /* DBGO(Arg0) */
+ /* DBGO("\n") */
+
+ /* Clear sleep SMI status flag and enable sleep SMI trap. */
+ /*Store(One, CSSM)
+ Store(One, SSEN)*/
+
+ /* On older chips, clear PciExpWakeDisEn */
+ /*if (LLessEqual(\_SB.SBRI, 0x13)) {
+ * Store(0,\_SB.PWDE)
+ *}
+ */
+
+ /* Clear wake status structure. */
+ Store(0, Index(WKST,0))
+ Store(0, Index(WKST,1))
+
+ Store (0x07, UPWS)
+} /* End Method(\_PTS) */
+
+/*
+* \_BFS OEM Back From Sleep method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* -none-
+*/
+Method(\_BFS, 1) {
+ /* DBGO("\\_BFS\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+}
+
+/*
+* \_WAK System Wake method
+*
+* Entry:
+* Arg0=The value of the sleeping state S1=1, S2=2
+*
+* Exit:
+* Return package of 2 DWords
+* Dword 1 - Status
+* 0x00000000 wake succeeded
+* 0x00000001 Wake was signaled but failed due to lack of power
+* 0x00000002 Wake was signaled but failed due to thermal condition
+* Dword 2 - Power Supply state
+* if non-zero the effective S-state the power supply entered
+*/
+Method(\_WAK, 1) {
+ /* DBGO("\\_WAK\n") */
+ /* DBGO("From S") */
+ /* DBGO(Arg0) */
+ /* DBGO(" to S0\n") */
+
+ /* Re-enable HPET */
+ Store(1,USBS)
+
+ Return(WKST)
+} /* End Method(\_WAK) */
diff --git a/src/mainboard/amd/lamar/acpi/superio.asl b/src/mainboard/amd/lamar/acpi/superio.asl
new file mode 100644
index 0000000..43cbc0e
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/superio.asl
@@ -0,0 +1,20 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* No Super I/O device or functionality yet */
diff --git a/src/mainboard/amd/lamar/acpi/thermal.asl b/src/mainboard/amd/lamar/acpi/thermal.asl
new file mode 100644
index 0000000..21dc584
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/thermal.asl
@@ -0,0 +1,20 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* No thermal zone functionality */
diff --git a/src/mainboard/amd/lamar/acpi/usb_oc.asl b/src/mainboard/amd/lamar/acpi/usb_oc.asl
new file mode 100644
index 0000000..394f201
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi/usb_oc.asl
@@ -0,0 +1,31 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* USB overcurrent mapping pins. */
+Name(UOM0, 0)
+Name(UOM1, 2)
+Name(UOM2, 0)
+Name(UOM3, 7)
+Name(UOM4, 2)
+Name(UOM5, 2)
+Name(UOM6, 6)
+Name(UOM7, 2)
+Name(UOM8, 6)
+Name(UOM9, 6)
diff --git a/src/mainboard/amd/lamar/acpi_tables.c b/src/mainboard/amd/lamar/acpi_tables.c
new file mode 100644
index 0000000..b5d4317
--- /dev/null
+++ b/src/mainboard/amd/lamar/acpi_tables.c
@@ -0,0 +1,347 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/acpigen.h>
+#include <arch/ioapic.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <cpu/x86/msr.h>
+#include "agesawrapper.h"
+#include <cpu/amd/mtrr.h>
+#include <cpu/amd/amdfam15.h>
+
+#include "agesawrapper.h"
+
+#define DUMP_ACPI_TABLES 0
+
+#if DUMP_ACPI_TABLES == 1
+
+static void dump_mem(u32 start, u32 end)
+{
+ u32 i;
+ print_debug("dump_mem:");
+ for (i = start; i < end; i++) {
+ if ((i & 0xf) == 0) {
+ printk(BIOS_DEBUG, "\n%08x:", i);
+ }
+ printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i));
+ }
+ print_debug("\n");
+}
+#endif
+
+extern const unsigned char AmlCode[];
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+ /* Just a dummy */
+ return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write southbridge IOAPIC, only one */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS,
+ IO_APIC_ADDR, 0);
+
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, CONFIG_MAX_CPUS+1,
+ 0xFEC20000, 24);
+
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0);
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, 0xF);
+ /* 0: mean bus 0--->ISA */
+ /* 0: PIC 0 */
+ /* 2: APIC 2 */
+ /* 5 mean: 0101 --> Edige-triggered, Active high */
+
+ /* create all subtables for processors */
+ current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1);
+ /* 1: LINT1 connect to NMI */
+
+ return current;
+}
+
+unsigned long acpi_fill_hest(acpi_hest_t *hest)
+{
+ void *addr, *current;
+
+ /* Skip the HEST header. */
+ current = (void *)(hest + 1);
+
+ addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE);
+ if (addr != NULL)
+ current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(UINT16 *)addr - 2);
+
+ addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC);
+ if (addr != NULL)
+ current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(UINT16 *)addr - 2);
+
+ return (unsigned long)current;
+}
+
+unsigned long acpi_fill_slit(unsigned long current)
+{
+ /* Not implemented */
+ return current;
+}
+
+unsigned long acpi_fill_srat(unsigned long current)
+{
+ /* No NUMA, no SRAT */
+ return current;
+}
+
+unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id)
+{
+ int lens;
+ msr_t msr;
+ char pscope[] = "\\_SB.PCI0";
+
+ lens = acpigen_write_scope(pscope);
+ msr = rdmsr(TOP_MEM);
+ lens += acpigen_write_name_dword("TOM1", msr.lo);
+ msr = rdmsr(TOP_MEM2);
+ /*
+ * Since XP only implements parts of ACPI 2.0, we can't use a qword
+ * here.
+ * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt
+ * slide 22ff.
+ * Shift value right by 20 bit to make it fit into 32bit,
+ * giving us 1MB granularity and a limit of almost 4Exabyte of memory.
+ */
+ lens += acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20);
+ acpigen_patch_len(lens - 1);
+ return (unsigned long) (acpigen_get_current());
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ acpi_rsdp_t *rsdp;
+ acpi_rsdt_t *rsdt;
+ acpi_hpet_t *hpet;
+ acpi_madt_t *madt;
+ acpi_srat_t *srat;
+ acpi_slit_t *slit;
+ acpi_fadt_t *fadt;
+ acpi_facs_t *facs;
+ acpi_header_t *dsdt;
+ acpi_header_t *ssdt;
+ acpi_header_t *alib;
+ acpi_header_t *ivrs;
+ acpi_header_t *crat;
+ acpi_hest_t *hest;
+
+ get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */
+
+ /* Align ACPI tables to 16 bytes */
+ start = ALIGN(start, 16);
+ current = start;
+
+ printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
+
+ /* We need at least an RSDP and an RSDT Table */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+
+ /* clear all table memory */
+ memset((void *)start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt, NULL);
+ acpi_write_rsdt(rsdt);
+
+ /* DSDT */
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * DSDT at %lx\n", current);
+ dsdt = (acpi_header_t *)current; /* it will used by fadt */
+ memcpy(dsdt, &AmlCode, sizeof(acpi_header_t));
+ current += dsdt->length;
+ memcpy(dsdt, &AmlCode, dsdt->length);
+ printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n",dsdt,dsdt->length);
+
+ /* FACS */ /* it needs 64 bit alignment */
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * FACS at %lx\n", current);
+ facs = (acpi_facs_t *) current; /* it will be used by fadt */
+ current += sizeof(acpi_facs_t);
+ acpi_create_facs(facs);
+
+ /* FADT */
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * FADT at %lx\n", current);
+ fadt = (acpi_fadt_t *) current;
+ current += sizeof(acpi_fadt_t);
+
+ acpi_create_fadt(fadt, facs, dsdt);
+ acpi_add_table(rsdp, fadt);
+
+ /*
+ * We explicitly add these tables later on:
+ */
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * HPET at %lx\n", current);
+ hpet = (acpi_hpet_t *) current;
+ current += sizeof(acpi_hpet_t);
+ acpi_create_hpet(hpet);
+ acpi_add_table(rsdp, hpet);
+
+ /* If we want to use HPET Timers Linux wants an MADT */
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * MADT at %lx\n",current);
+ madt = (acpi_madt_t *) current;
+ acpi_create_madt(madt);
+ current += madt->header.length;
+ acpi_add_table(rsdp, madt);
+
+ /* HEST */
+ current = ALIGN(current, 8);
+ hest = (acpi_hest_t *)current;
+ acpi_write_hest((void *)current);
+ acpi_add_table(rsdp, (void *)current);
+ current += ((acpi_header_t *)current)->length;
+
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * IVRS at %lx\n", current);
+ ivrs = agesawrapper_getlateinitptr(PICK_IVRS);
+ if (ivrs != NULL) {
+ memcpy((void *)current, ivrs, ivrs->length);
+ ivrs = (acpi_header_t *) current;
+ current += ivrs->length;
+ acpi_add_table(rsdp, ivrs);
+ } else {
+ printk(BIOS_DEBUG, " AGESA IVRS table NULL. Skipping.\n");
+ }
+
+ /* SRAT */
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current);
+ srat = (acpi_srat_t *) agesawrapper_getlateinitptr (PICK_SRAT);
+ if (srat != NULL) {
+ memcpy((void *)current, srat, srat->header.length);
+ srat = (acpi_srat_t *) current;
+ current += srat->header.length;
+ acpi_add_table(rsdp, srat);
+ } else {
+ printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n");
+ }
+
+ /* SLIT */
+ current = ALIGN(current, 8);
+ printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current);
+ slit = (acpi_slit_t *) agesawrapper_getlateinitptr (PICK_SLIT);
+ if (slit != NULL) {
+ memcpy((void *)current, slit, slit->header.length);
+ slit = (acpi_slit_t *) current;
+ current += slit->header.length;
+ acpi_add_table(rsdp, slit);
+ } else {
+ printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n");
+ }
+
+ /* ALIB */
+ current = ALIGN(current, 16);
+ printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current);
+ alib = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_ALIB);
+ if (alib != NULL) {
+ memcpy((void *)current, alib, alib->length);
+ alib = (acpi_header_t *) current;
+ current += alib->length;
+ acpi_add_table(rsdp, (void *)alib);
+ }
+ else {
+ printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL. Skipping.\n");
+ }
+
+ /* CRAT */
+ current = ALIGN(current, 16);
+ printk(BIOS_DEBUG, "ACPI: * AGESA CRAT SSDT at %lx\n", current);
+ crat = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_CRAT);
+ if (crat != NULL) {
+ memcpy((void *)current, crat, crat->length);
+ crat = (acpi_header_t *) current;
+ current += crat->length;
+ acpi_add_table(rsdp, (void *)crat);
+ }
+ else {
+ printk(BIOS_DEBUG, " AGESA CRAT SSDT table NULL. Skipping.\n");
+ }
+
+ /* this pstate ssdt may cause Blue Screen: Fixed: Keep this comment for a while. */
+ /* SSDT */
+ current = ALIGN(current, 16);
+ printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current);
+ ssdt = (acpi_header_t *)agesawrapper_getlateinitptr (PICK_PSTATE);
+ if (ssdt != NULL) {
+ memcpy((void *)current, ssdt, ssdt->length);
+ ssdt = (acpi_header_t *) current;
+ current += ssdt->length;
+ }
+ else {
+ printk(BIOS_DEBUG, " AGESA PState table NULL. Skipping.\n");
+ }
+ acpi_add_table(rsdp,ssdt);
+
+ printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current);
+
+ printk(BIOS_DEBUG, "ACPI: * SSDT\n");
+ ssdt = (acpi_header_t *)current;
+
+ acpi_create_ssdt_generator(ssdt, ACPI_TABLE_CREATOR);
+ current += ssdt->length;
+ acpi_add_table(rsdp, ssdt);
+
+#if DUMP_ACPI_TABLES == 1
+ printk(BIOS_DEBUG, "rsdp\n");
+ dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
+
+ printk(BIOS_DEBUG, "rsdt\n");
+ dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
+
+ printk(BIOS_DEBUG, "madt\n");
+ dump_mem(madt, ((void *)madt) + madt->header.length);
+
+ printk(BIOS_DEBUG, "srat\n");
+ dump_mem(srat, ((void *)srat) + srat->header.length);
+
+ printk(BIOS_DEBUG, "slit\n");
+ dump_mem(slit, ((void *)slit) + slit->header.length);
+
+ printk(BIOS_DEBUG, "ssdt\n");
+ dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
+
+ printk(BIOS_DEBUG, "fadt\n");
+ dump_mem(fadt, ((void *)fadt) + fadt->header.length);
+
+ printk(BIOS_DEBUG, "hest\n");
+ dump_mem(hest, ((void *)hest) + hest->header.length);
+#endif
+
+ printk(BIOS_INFO, "ACPI: done.\n");
+ return current;
+}
diff --git a/src/mainboard/amd/lamar/agesawrapper.c b/src/mainboard/amd/lamar/agesawrapper.c
new file mode 100644
index 0000000..0b88c93
--- /dev/null
+++ b/src/mainboard/amd/lamar/agesawrapper.c
@@ -0,0 +1,740 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <cpu/x86/mtrr.h>
+#include "agesawrapper.h"
+#include "BiosCallOuts.h"
+#include "cpuRegisters.h"
+#include "cpuCacheInit.h"
+#include "cpuApicUtilities.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "Dispatcher.h"
+#include "cpuCacheInit.h"
+#include "amdlib.h"
+#include "PlatformGnbPcieComplex.h"
+#include "Filecode.h"
+#include "heapManager.h"
+#include "FchPlatform.h"
+#include "Fch.h"
+#include <cpu/amd/agesa/s3_resume.h>
+#include <cbmem.h>
+#include <arch/acpi.h>
+#include <arch/io.h>
+#include <device/device.h>
+#include <hudson.h>
+
+VOID FchInitS3LateRestore (IN FCH_DATA_BLOCK *FchDataPtr);
+VOID FchInitS3EarlyRestore (IN FCH_DATA_BLOCK *FchDataPtr);
+
+#define FILECODE UNASSIGNED_FILE_FILECODE
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+
+/* ACPI table pointers returned by AmdInitLate */
+VOID *DmiTable = NULL;
+VOID *AcpiPstate = NULL;
+VOID *AcpiSrat = NULL;
+VOID *AcpiSlit = NULL;
+
+VOID *AcpiWheaMce = NULL;
+VOID *AcpiWheaCmc = NULL;
+VOID *AcpiAlib = NULL;
+VOID *AcpiIvrs = NULL;
+VOID *AcpiCrat = NULL;
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+UINT32
+agesawrapper_amdinitcpuio (
+ VOID
+ )
+{
+ AGESA_STATUS Status;
+ UINT64 MsrReg;
+ UINT32 PciData;
+ PCI_ADDR PciAddress;
+ AMD_CONFIG_PARAMS StdHeader;
+
+ /* Enable legacy video routing: D18F1xF4 VGA Enable */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xF4);
+ PciData = 1;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+ /* The platform BIOS needs to ensure the memory ranges of SB800 legacy
+ * devices (TPM, HPET, BIOS RAM, Watchdog Timer, I/O APIC and ACPI) are
+ * set to non-posted regions.
+ */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x84);
+ PciData = 0x00FEDF00; /* last address before processor local APIC at FEE00000 */
+ PciData |= 1 << 7; /* set NP (non-posted) bit */
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x80);
+ PciData = (0xFED00000 >> 8) | 3; /* lowest NP address is HPET at FED00000 */
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+ /* Map the remaining PCI hole as posted MMIO */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x8C);
+ PciData = 0x00FECF00; /* last address before non-posted range */
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ LibAmdMsrRead (0xC001001A, &MsrReg, &StdHeader);
+ MsrReg = (MsrReg >> 8) | 3;
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0x88);
+ PciData = (UINT32)MsrReg;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+ /* Send all IO (0000-FFFF) to southbridge. */
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC4);
+ PciData = 0x0000F000;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x18, 1, 0xC0);
+ PciData = 0x00000003;
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+ Status = AGESA_SUCCESS;
+ return (UINT32)Status;
+}
+
+UINT32
+agesawrapper_amdinitmmio (
+ VOID
+ )
+{
+ AGESA_STATUS Status;
+ UINT64 MsrReg;
+ UINT32 PciData;
+ PCI_ADDR PciAddress;
+ AMD_CONFIG_PARAMS StdHeader;
+
+ /*
+ Set the MMIO Configuration Base Address and Bus Range onto MMIO configuration base
+ Address MSR register.
+ */
+ MsrReg = CONFIG_MMCONF_BASE_ADDRESS | (LibAmdBitScanReverse (CONFIG_MMCONF_BUS_NUMBER) << 2) | 1;
+ LibAmdMsrWrite (0xC0010058, &MsrReg, &StdHeader);
+
+ /*
+ Set the NB_CFG MSR register. Enable CF8 extended configuration cycles.
+ */
+ LibAmdMsrRead (0xC001001F, &MsrReg, &StdHeader);
+ MsrReg = MsrReg | 0x0000400000000000;
+ LibAmdMsrWrite (0xC001001F, &MsrReg, &StdHeader);
+
+ /* For serial port */
+ PciData = 0xFF03FFD5;
+ PciAddress.AddressValue = MAKE_SBDFO (0, 0, 0x14, 0x3, 0x44);
+ LibAmdPciWrite(AccessWidth32, PciAddress, &PciData, &StdHeader);
+
+ /* Set ROM cache onto WP to decrease post time */
+ MsrReg = (0x0100000000ull - CACHE_ROM_SIZE) | 5ull;
+ LibAmdMsrWrite (0x20C, &MsrReg, &StdHeader);
+ MsrReg = ((1ULL << CONFIG_CPU_ADDR_BITS) - CACHE_ROM_SIZE) | 0x800ull;
+ LibAmdMsrWrite (0x20D, &MsrReg, &StdHeader);
+
+ Status = AGESA_SUCCESS;
+ return (UINT32)Status;
+}
+
+UINT32
+agesawrapper_amdinitreset (
+ VOID
+ )
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_RESET_PARAMS AmdResetParams;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ LibAmdMemFill (&AmdResetParams,
+ 0,
+ sizeof (AMD_RESET_PARAMS),
+ &(AmdResetParams.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_RESET;
+ AmdParamStruct.AllocationMethod = ByHost;
+ AmdParamStruct.NewStructSize = sizeof(AMD_RESET_PARAMS);
+ AmdParamStruct.NewStructPtr = &AmdResetParams;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+ AmdCreateStruct (&AmdParamStruct);
+ //AmdResetParams.HtConfig.Depth = 0;
+#if !CONFIG_HUDSON_XHCI_ENABLE
+ AmdResetParams.FchInterface.Xhci0Enable = FALSE;
+#endif
+ AmdResetParams.FchInterface.Xhci1Enable = FALSE;
+
+ status = AmdInitReset ((AMD_RESET_PARAMS *)AmdParamStruct.NewStructPtr);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+ AmdReleaseStruct (&AmdParamStruct);
+ return (UINT32)status;
+}
+
+UINT32
+agesawrapper_amdinitearly (
+ VOID
+ )
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_EARLY_PARAMS *AmdEarlyParamsPtr;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_EARLY;
+ AmdParamStruct.AllocationMethod = PreMemHeap;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+ AmdCreateStruct (&AmdParamStruct);
+
+ AmdEarlyParamsPtr = (AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr;
+ OemCustomizeInitEarly (AmdEarlyParamsPtr);
+
+ status = AmdInitEarly ((AMD_EARLY_PARAMS *)AmdParamStruct.NewStructPtr);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+ AmdReleaseStruct (&AmdParamStruct);
+
+ return (UINT32)status;
+}
+
+//UINT32 GetHeapBase(
+// AMD_CONFIG_PARAMS *StdHeader
+// )
+//{
+// UINT32 heap;
+//
+//#if CONFIG_HAVE_ACPI_RESUME
+// /* Both romstage and ramstage has this S3 detect. */
+// if (acpi_get_sleep_type() == 3)
+// heap = (UINT32)cbmem_find(CBMEM_ID_RESUME_SCRATCH) + (CONFIG_HIGH_SCRATCH_MEMORY_SIZE - BIOS_HEAP_SIZE); /* base + high_stack_size */
+// else
+//#endif
+// heap = BIOS_HEAP_START_ADDRESS; /* Low mem */
+//
+// return heap;
+//}
+
+UINT32
+agesawrapper_amdinitpost (
+ VOID
+ )
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_POST_PARAMS *PostParams;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_POST;
+ AmdParamStruct.AllocationMethod = PreMemHeap;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+ AmdCreateStruct (&AmdParamStruct);
+ PostParams = (AMD_POST_PARAMS *)AmdParamStruct.NewStructPtr;
+ status = AmdInitPost (PostParams);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(PostParams->StdHeader.HeapStatus);
+ AmdReleaseStruct (&AmdParamStruct);
+ /* Initialize heap space */
+ EmptyHeap();
+
+
+ return (UINT32)status;
+}
+
+UINT32
+agesawrapper_amdinitenv (
+ VOID
+ )
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_ENV_PARAMS *EnvParam;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_ENV;
+ AmdParamStruct.AllocationMethod = PostMemDram;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+ status = AmdCreateStruct (&AmdParamStruct);
+ EnvParam = (AMD_ENV_PARAMS *)AmdParamStruct.NewStructPtr;
+
+ status = AmdInitEnv (EnvParam);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(EnvParam->StdHeader.HeapStatus);
+ /* Initialize Subordinate Bus Number and Secondary Bus Number
+ * In platform BIOS this address is allocated by PCI enumeration code
+ Modify D1F0x18
+ */
+
+ return (UINT32)status;
+}
+
+VOID *
+agesawrapper_getlateinitptr (
+ int pick
+ )
+{
+ switch (pick) {
+ case PICK_DMI:
+ return DmiTable;
+ case PICK_PSTATE:
+ return AcpiPstate;
+ case PICK_SRAT:
+ return AcpiSrat;
+ case PICK_SLIT:
+ return AcpiSlit;
+ case PICK_WHEA_MCE:
+ return AcpiWheaMce;
+ case PICK_WHEA_CMC:
+ return AcpiWheaCmc;
+ case PICK_ALIB:
+ return AcpiAlib;
+ case PICK_IVRS:
+ return AcpiIvrs;
+ case PICK_CRAT:
+ return AcpiCrat;
+ default:
+ return NULL;
+ }
+}
+
+UINT32
+agesawrapper_amdinitmid (
+ VOID
+ )
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+
+ /* Enable MMIO on AMD CPU Address Map Controller */
+ agesawrapper_amdinitcpuio ();
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_MID;
+ AmdParamStruct.AllocationMethod = PostMemDram;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+ AmdCreateStruct (&AmdParamStruct);
+
+ ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr)->GnbMidConfiguration.iGpuVgaMode = 0;/* 0 iGpuVgaAdapter, 1 iGpuVgaNonAdapter; */
+ status = AmdInitMid ((AMD_MID_PARAMS *)AmdParamStruct.NewStructPtr);
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+ AmdReleaseStruct (&AmdParamStruct);
+
+ return (UINT32)status;
+}
+
+UINT32
+agesawrapper_amdinitlate (
+ VOID
+ )
+{
+ AGESA_STATUS Status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_LATE_PARAMS *AmdLateParams;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_LATE;
+ AmdParamStruct.AllocationMethod = PostMemDram;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+
+ /* NOTE: if not call amdcreatestruct, the initializer(AmdInitLateInitializer) would not be called */
+ AmdCreateStruct(&AmdParamStruct);
+ AmdLateParams = (AMD_LATE_PARAMS *)AmdParamStruct.NewStructPtr;
+ Status = AmdInitLate(AmdLateParams);
+ /* CDIT table is not created. */
+ if (Status != AGESA_SUCCESS) {
+ agesawrapper_amdreadeventlog(AmdLateParams->StdHeader.HeapStatus);
+ ASSERT(Status == AGESA_SUCCESS);
+ }
+
+ DmiTable = AmdLateParams->DmiTable;
+ AcpiPstate = AmdLateParams->AcpiPState;
+ AcpiSrat = AmdLateParams->AcpiSrat;
+ AcpiSlit = AmdLateParams->AcpiSlit;
+
+ AcpiWheaMce = AmdLateParams->AcpiWheaMce;
+ AcpiWheaCmc = AmdLateParams->AcpiWheaCmc;
+ AcpiAlib = AmdLateParams->AcpiAlib;
+ AcpiIvrs = AmdLateParams->AcpiIvrs;
+ AcpiCrat = AmdLateParams->AcpiCrat;
+
+ printk(BIOS_DEBUG, "DmiTable:%x, AcpiPstatein: %x, AcpiSrat:%x,"
+ "AcpiSlit:%x, Mce:%x, Cmc:%x,"
+ "Alib:%x, AcpiIvrs:%x in %s\n",
+ (unsigned int)DmiTable, (unsigned int)AcpiPstate, (unsigned int)AcpiSrat,
+ (unsigned int)AcpiSlit, (unsigned int)AcpiWheaMce, (unsigned int)AcpiWheaCmc,
+ (unsigned int)AcpiAlib, (unsigned int)AcpiIvrs, __func__);
+
+ /* AmdReleaseStruct (&AmdParamStruct); */
+ return (UINT32)Status;
+}
+
+UINT32
+agesawrapper_amdlaterunaptask (
+ UINT32 Func,
+ UINT32 Data,
+ VOID *ConfigPtr
+ )
+{
+ AGESA_STATUS Status;
+ AP_EXE_PARAMS ApExeParams;
+
+ LibAmdMemFill (&ApExeParams,
+ 0,
+ sizeof (AP_EXE_PARAMS),
+ &(ApExeParams.StdHeader));
+
+ ApExeParams.StdHeader.AltImageBasePtr = 0;
+ ApExeParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ ApExeParams.StdHeader.Func = 0;
+ ApExeParams.StdHeader.ImageBasePtr = 0;
+ ApExeParams.FunctionNumber = Func;
+ ApExeParams.RelatedDataBlock = ConfigPtr;
+
+ Status = AmdLateRunApTask (&ApExeParams);
+ if (Status != AGESA_SUCCESS) {
+ /* agesawrapper_amdreadeventlog(); */
+ ASSERT(Status == AGESA_SUCCESS);
+ }
+
+ return (UINT32)Status;
+}
+
+#if CONFIG_HAVE_ACPI_RESUME
+
+UINT32 agesawrapper_amdinitresume(VOID)
+{
+ AGESA_STATUS status;
+ AMD_INTERFACE_PARAMS AmdParamStruct;
+ AMD_RESUME_PARAMS *AmdResumeParamsPtr;
+ S3_DATA_TYPE S3DataType;
+
+ LibAmdMemFill (&AmdParamStruct,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdParamStruct.StdHeader));
+
+ AmdParamStruct.AgesaFunctionName = AMD_INIT_RESUME;
+ AmdParamStruct.AllocationMethod = PreMemHeap;
+ AmdParamStruct.StdHeader.AltImageBasePtr = 0;
+ AmdParamStruct.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdParamStruct.StdHeader.Func = 0;
+ AmdParamStruct.StdHeader.ImageBasePtr = 0;
+ AmdCreateStruct (&AmdParamStruct);
+
+ AmdResumeParamsPtr = (AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr;
+
+ AmdResumeParamsPtr->S3DataBlock.NvStorageSize = 0;
+ AmdResumeParamsPtr->S3DataBlock.VolatileStorageSize = 0;
+ S3DataType = S3DataTypeNonVolatile;
+ OemAgesaGetS3Info (S3DataType,
+ (u32 *) &AmdResumeParamsPtr->S3DataBlock.NvStorageSize,
+ (void **) &AmdResumeParamsPtr->S3DataBlock.NvStorage);
+
+ status = AmdInitResume ((AMD_RESUME_PARAMS *)AmdParamStruct.NewStructPtr);
+
+ if (status != AGESA_SUCCESS) agesawrapper_amdreadeventlog(AmdParamStruct.StdHeader.HeapStatus);
+ AmdReleaseStruct (&AmdParamStruct);
+
+ return (UINT32)status;
+}
+
+#ifndef __PRE_RAM__
+UINT32 agesawrapper_fchs3earlyrestore (VOID)
+{
+ AGESA_STATUS status = AGESA_SUCCESS;
+
+ FCH_DATA_BLOCK FchParams;
+ AMD_CONFIG_PARAMS StdHeader;
+
+ StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+ StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10;
+ StdHeader.AltImageBasePtr = 0;
+ StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ StdHeader.Func = 0;
+ StdHeader.ImageBasePtr = 0;
+
+ LibAmdMemFill (&FchParams,
+ 0,
+ sizeof (FchParams),
+ &StdHeader);
+
+ FchParams.StdHeader = &StdHeader;
+
+ // TODO Incorporate initialization from struct UserOptions into processing
+ s3_resume_init_data(&FchParams);
+
+ FchInitS3EarlyRestore(&FchParams);
+
+ return status;
+}
+#endif
+
+UINT32 agesawrapper_amds3laterestore (VOID)
+{
+ AGESA_STATUS Status;
+ AMD_INTERFACE_PARAMS AmdInterfaceParams;
+ AMD_S3LATE_PARAMS AmdS3LateParams;
+ AMD_S3LATE_PARAMS *AmdS3LateParamsPtr;
+ S3_DATA_TYPE S3DataType;
+
+ agesawrapper_amdinitcpuio();
+ LibAmdMemFill (&AmdS3LateParams,
+ 0,
+ sizeof (AMD_S3LATE_PARAMS),
+ &(AmdS3LateParams.StdHeader));
+ AmdInterfaceParams.StdHeader.ImageBasePtr = 0;
+ AmdInterfaceParams.AllocationMethod = ByHost;
+ AmdInterfaceParams.AgesaFunctionName = AMD_S3LATE_RESTORE;
+ AmdInterfaceParams.NewStructPtr = &AmdS3LateParams;
+ AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdS3LateParamsPtr = &AmdS3LateParams;
+ AmdInterfaceParams.NewStructSize = sizeof (AMD_S3LATE_PARAMS);
+
+ AmdCreateStruct (&AmdInterfaceParams);
+
+ AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize = 0;
+ S3DataType = S3DataTypeVolatile;
+
+ OemAgesaGetS3Info (S3DataType,
+ (u32 *) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorageSize,
+ (void **) &AmdS3LateParamsPtr->S3DataBlock.VolatileStorage);
+
+ Status = AmdS3LateRestore (AmdS3LateParamsPtr);
+ if (Status != AGESA_SUCCESS) {
+ agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus);
+ ASSERT(Status == AGESA_SUCCESS);
+ }
+
+ return (UINT32)Status;
+}
+
+#ifndef __PRE_RAM__
+
+UINT32 agesawrapper_fchs3laterestore (VOID)
+{
+ AGESA_STATUS status = AGESA_SUCCESS;
+
+ AMD_CONFIG_PARAMS StdHeader;
+ FCH_DATA_BLOCK FchParams;
+
+ StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+ StdHeader.HeapBasePtr = GetHeapBase(&StdHeader) + 0x10;
+ StdHeader.AltImageBasePtr = 0;
+ StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ StdHeader.Func = 0;
+ StdHeader.ImageBasePtr = 0;
+
+ LibAmdMemFill (&FchParams,
+ 0,
+ sizeof (FchParams),
+ &StdHeader);
+
+ FchParams.StdHeader = &StdHeader;
+
+ // TODO Incorporate initialization from struct UserOptions into processing
+ s3_resume_init_data(&FchParams);
+
+ FchInitS3LateRestore(&FchParams);
+
+ #if IS_ENABLED(CONFIG_GENERATE_MP_TABLE)
+
+ /* PIC IRQ routine */
+ {
+ extern UINT8 picr_data[0x54];
+ UINT8 byte;
+
+ for (byte = 0x0; byte < sizeof(picr_data); byte ++) {
+ outb(byte, 0xC00);
+ outb(picr_data[byte], 0xC01);
+ }
+ }
+
+ /* APIC IRQ routine */
+ {
+ extern UINT8 intr_data[0x54];
+ UINT8 byte;
+
+ for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
+ outb(byte | 0x80, 0xC00);
+ outb(intr_data[byte], 0xC01);
+ }
+ }
+
+ #endif
+
+ return status;
+}
+#endif
+
+#ifndef __PRE_RAM__
+
+UINT32 agesawrapper_amdS3Save(VOID)
+{
+ AGESA_STATUS Status;
+ AMD_S3SAVE_PARAMS *AmdS3SaveParamsPtr;
+ AMD_INTERFACE_PARAMS AmdInterfaceParams;
+ S3_DATA_TYPE S3DataType;
+
+ LibAmdMemFill (&AmdInterfaceParams,
+ 0,
+ sizeof (AMD_INTERFACE_PARAMS),
+ &(AmdInterfaceParams.StdHeader));
+
+ AmdInterfaceParams.StdHeader.ImageBasePtr = 0;
+ AmdInterfaceParams.StdHeader.HeapStatus = HEAP_SYSTEM_MEM;
+ AmdInterfaceParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdInterfaceParams.AllocationMethod = PostMemDram;
+ AmdInterfaceParams.AgesaFunctionName = AMD_S3_SAVE;
+ AmdInterfaceParams.StdHeader.AltImageBasePtr = 0;
+ AmdInterfaceParams.StdHeader.Func = 0;
+
+ AmdCreateStruct(&AmdInterfaceParams);
+ AmdS3SaveParamsPtr = (AMD_S3SAVE_PARAMS *)AmdInterfaceParams.NewStructPtr;
+ AmdS3SaveParamsPtr->StdHeader = AmdInterfaceParams.StdHeader;
+
+ Status = AmdS3Save(AmdS3SaveParamsPtr);
+ if (Status != AGESA_SUCCESS) {
+ agesawrapper_amdreadeventlog(AmdInterfaceParams.StdHeader.HeapStatus);
+ ASSERT(Status == AGESA_SUCCESS);
+ }
+
+ S3DataType = S3DataTypeNonVolatile;
+ printk(BIOS_DEBUG, "NvStorageSize=%x, NvStorage=%x\n",
+ (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize,
+ (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.NvStorage);
+
+ Status = OemAgesaSaveS3Info (
+ S3DataType,
+ AmdS3SaveParamsPtr->S3DataBlock.NvStorageSize,
+ AmdS3SaveParamsPtr->S3DataBlock.NvStorage);
+
+ printk(BIOS_DEBUG, "VolatileStorageSize=%x, VolatileStorage=%x\n",
+ (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize,
+ (unsigned int)AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage);
+
+ if (AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize != 0) {
+ S3DataType = S3DataTypeVolatile;
+
+ Status = OemAgesaSaveS3Info (
+ S3DataType,
+ AmdS3SaveParamsPtr->S3DataBlock.VolatileStorageSize,
+ AmdS3SaveParamsPtr->S3DataBlock.VolatileStorage);
+ }
+ OemAgesaSaveMtrr();
+
+ AmdReleaseStruct (&AmdInterfaceParams);
+
+ return (UINT32)Status;
+}
+
+#endif /* #ifndef __PRE_RAM__ */
+#endif /* CONFIG_HAVE_ACPI_RESUME */
+
+UINT32
+agesawrapper_amdreadeventlog (
+ UINT8 HeapStatus
+ )
+{
+ AGESA_STATUS Status;
+ EVENT_PARAMS AmdEventParams;
+
+ LibAmdMemFill (&AmdEventParams,
+ 0,
+ sizeof (EVENT_PARAMS),
+ &(AmdEventParams.StdHeader));
+
+ AmdEventParams.StdHeader.AltImageBasePtr = 0;
+ AmdEventParams.StdHeader.CalloutPtr = (CALLOUT_ENTRY) &GetBiosCallout;
+ AmdEventParams.StdHeader.Func = 0;
+ AmdEventParams.StdHeader.ImageBasePtr = 0;
+ AmdEventParams.StdHeader.HeapStatus = HeapStatus;
+ Status = AmdReadEventLog (&AmdEventParams);
+ while (AmdEventParams.EventClass != 0) {
+ printk(BIOS_DEBUG,"\nEventLog: EventClass = %x, EventInfo = %x.\n", (unsigned int)AmdEventParams.EventClass,(unsigned int)AmdEventParams.EventInfo);
+ printk(BIOS_DEBUG," Param1 = %x, Param2 = %x.\n",(unsigned int)AmdEventParams.DataParam1, (unsigned int)AmdEventParams.DataParam2);
+ printk(BIOS_DEBUG," Param3 = %x, Param4 = %x.\n",(unsigned int)AmdEventParams.DataParam3, (unsigned int)AmdEventParams.DataParam4);
+ Status = AmdReadEventLog (&AmdEventParams);
+ }
+
+ return (UINT32)Status;
+}
diff --git a/src/mainboard/amd/lamar/agesawrapper.h b/src/mainboard/amd/lamar/agesawrapper.h
new file mode 100644
index 0000000..6e2215c
--- /dev/null
+++ b/src/mainboard/amd/lamar/agesawrapper.h
@@ -0,0 +1,96 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/*----------------------------------------------------------------------------------------
+ * M O D U L E S U S E D
+ *----------------------------------------------------------------------------------------
+ */
+
+#ifndef _AGESAWRAPPER_H_
+#define _AGESAWRAPPER_H_
+
+#include <stdint.h>
+#include "Porting.h"
+#include "AGESA.h"
+
+/*----------------------------------------------------------------------------------------
+ * D E F I N I T I O N S A N D M A C R O S
+ *----------------------------------------------------------------------------------------
+ */
+/* Define AMD Ontario APPU SSID/SVID */
+#define AMD_APU_SVID 0x1022
+#define AMD_APU_SSID 0x1234
+#define PCIE_BASE_ADDRESS CONFIG_MMCONF_BASE_ADDRESS
+
+enum {
+ PICK_DMI, /* DMI Interface */
+ PICK_PSTATE, /* Acpi Pstate SSDT Table */
+ PICK_SRAT, /* SRAT Table */
+ PICK_SLIT, /* SLIT Table */
+ PICK_WHEA_MCE, /* WHEA MCE table */
+ PICK_WHEA_CMC, /* WHEA CMV table */
+ PICK_ALIB, /* SACPI SSDT table with ALIB implementation */
+ PICK_IVRS, /* IOMMU ACPI IVRS(I/O Virtualization Reporting Structure) table */
+ PICK_CRAT
+};
+
+/*----------------------------------------------------------------------------------------
+ * T Y P E D E F S A N D S T R U C T U R E S
+ *----------------------------------------------------------------------------------------
+ */
+
+typedef struct {
+ UINT32 CalloutName;
+ AGESA_STATUS (*CalloutPtr) (UINT32 Func, UINT32 Data, VOID* ConfigPtr);
+} BIOS_CALLOUT_STRUCT;
+
+/*----------------------------------------------------------------------------------------
+ * P R O T O T Y P E S O F L O C A L F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*----------------------------------------------------------------------------------------
+ * E X P O R T E D F U N C T I O N S
+ *----------------------------------------------------------------------------------------
+ */
+
+/*---------------------------------------------------------------------------------------
+ * L O C A L F U N C T I O N S
+ *---------------------------------------------------------------------------------------
+ */
+
+UINT32 agesawrapper_amdinitreset (void);
+UINT32 agesawrapper_amdinitearly (void);
+UINT32 agesawrapper_amdinitenv (void);
+UINT32 agesawrapper_amdinitlate (void);
+UINT32 agesawrapper_amdinitpost (void);
+UINT32 agesawrapper_amdinitmid (void);
+UINT32 agesawrapper_amdreadeventlog (UINT8 HeapStatus);
+UINT32 agesawrapper_amdinitmmio (void);
+UINT32 agesawrapper_amdinitcpuio (void);
+void *agesawrapper_getlateinitptr (int pick);
+UINT32 agesawrapper_amdlaterunaptask (UINT32 Func, UINT32 Data, void *ConfigPtr);
+UINT32 agesawrapper_amdS3Save(VOID);
+UINT32 agesawrapper_amdinitresume(VOID);
+UINT32 agesawrapper_amds3laterestore (VOID);
+
+UINT32 agesawrapper_fchs3earlyrestore (VOID);
+UINT32 agesawrapper_fchs3laterestore (VOID);
+
+#endif
diff --git a/src/mainboard/amd/lamar/board_info.txt b/src/mainboard/amd/lamar/board_info.txt
new file mode 100644
index 0000000..8bce92e
--- /dev/null
+++ b/src/mainboard/amd/lamar/board_info.txt
@@ -0,0 +1,5 @@
+Board name: DB-FP3 (Lamar)
+Category: eval
+ROM package: SOIC-8
+ROM protocol: SPI
+ROM socketed: n
diff --git a/src/mainboard/amd/lamar/buildOpts.c b/src/mainboard/amd/lamar/buildOpts.c
new file mode 100644
index 0000000..547628a
--- /dev/null
+++ b/src/mainboard/amd/lamar/buildOpts.c
@@ -0,0 +1,548 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/**
+ * AMD User options selection for a Family 15 Model 30 platform solution system
+ *
+ * This file is placed in the user's platform directory and contains the
+ * build option selections desired for that platform.
+ *
+ * For Information about this file, see @ref platforminstall.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Core
+ * @e \$Revision: 23714 $ @e \$Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $
+ */
+
+#include "AGESA.h"
+//#include "CommonReturns.h"
+#include "Filecode.h"
+#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE
+
+/* Select the cpu family. */
+#define INSTALL_FAMILY_10_SUPPORT FALSE
+#define INSTALL_FAMILY_12_SUPPORT FALSE
+#define INSTALL_FAMILY_14_SUPPORT FALSE
+
+
+/* Select the cpu socket type. */
+#define INSTALL_G34_SOCKET_SUPPORT FALSE
+#define INSTALL_C32_SOCKET_SUPPORT FALSE
+#define INSTALL_S1G3_SOCKET_SUPPORT FALSE
+#define INSTALL_S1G4_SOCKET_SUPPORT FALSE
+#define INSTALL_ASB2_SOCKET_SUPPORT FALSE
+#define INSTALL_FS1_SOCKET_SUPPORT FALSE
+#define INSTALL_FM1_SOCKET_SUPPORT FALSE
+#define INSTALL_FP2_SOCKET_SUPPORT FALSE
+#define INSTALL_FT1_SOCKET_SUPPORT FALSE
+#define INSTALL_AM3_SOCKET_SUPPORT FALSE
+//INSTALL_FS1_SOCKET_SUPPORT
+//INSTALL_FS1_SOCKET_SUPPORT
+#define INSTALL_FM2_SOCKET_SUPPORT FALSE
+#define INSTALL_FM2r2_SOCKET_SUPPORT FALSE
+#define INSTALL_FP3_SOCKET_SUPPORT TRUE
+
+#define INSTALL_FAMILY_15_MODEL_1x_SUPPORT FALSE
+#define INSTALL_FAMILY_15_MODEL_3x_SUPPORT TRUE
+
+#ifdef BLDOPT_REMOVE_FAMILY_15_MODEL_1x_SUPPORT
+ #if BLDOPT_REMOVE_FAMILY_15_MODEL_1x_SUPPORT == TRUE
+ #undef INSTALL_FAMILY_15_MODEL_1x_SUPPORT
+ #define INSTALL_FAMILY_15_MODEL_1x_SUPPORT FALSE
+ #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_FAMILY_15_MODEL_3x_SUPPORT
+ #if BLDOPT_REMOVE_FAMILY_15_MODEL_3x_SUPPORT == TRUE
+ #undef INSTALL_FAMILY_15_MODEL_3x_SUPPORT
+ #define INSTALL_FAMILY_15_MODEL_3x_SUPPORT FALSE
+ #endif
+#endif
+
+#define IDSOPT_IDS_ENABLED TRUE
+#define IDSOPT_TRACING_ENABLED TRUE
+#define IDSOPT_TRACING_CONSOLE_SERIALPORT TRUE
+#define IDSOPT_SERIAL_PORT 3F8
+
+//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE
+#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE
+#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE
+//#define BLDOPT_REMOVE_ECC_SUPPORT FALSE
+//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE
+//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE
+#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE
+#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE
+#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE
+//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE
+#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE
+//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE
+#define BLDOPT_REMOVE_SRAT TRUE
+#define BLDOPT_REMOVE_SLIT TRUE
+#define BLDOPT_REMOVE_WHEA TRUE
+//#define BLDOPT_REMOVE_CRAT TRUE
+//#define BLDOPT_REMOVE_DMI FALSE //TRUE
+#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE
+
+//This element selects whether P-States should be forced to be independent,
+// as reported by the ACPI _PSD object. For single-link processors,
+// setting TRUE for OS to support this feature.
+
+//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE
+
+#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER
+/* Build configuration values here.
+ */
+#define BLDCFG_VRM_CURRENT_LIMIT 0xd6d8 //0x15f90 //55000
+#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 //0x4e20
+#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 0x13880 // 0x1d4c0 // 80000
+#define BLDCFG_VRM_SVI_OCP_LEVEL 0 //0x23280
+#define BLDCFG_VRM_SLEW_RATE 0x1388 //0x2710
+#define BLDCFG_VRM_ADDITIONAL_DELAY 0
+#define BLDCFG_PLAT_NUM_IO_APICS 3
+#define BLDCFG_GNB_IOAPIC_ADDRESS 0xFEC20000
+#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST
+#define BLDCFG_MEM_INIT_PSTATE 0
+
+#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE
+
+#define BLDCFG_DIMM_TYPE_USED_IN_MIXED_CONFIG DDR3_TECHNOLOGY
+#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR2133_FREQUENCY
+#define BLDCFG_MEMORY_MODE_UNGANGED TRUE
+#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE
+#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE
+#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE
+#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE
+#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE
+#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE
+#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE
+#define BLDCFG_MEMORY_POWER_DOWN TRUE
+#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT
+#define BLDCFG_ONLINE_SPARE FALSE
+#define BLDCFG_BANK_SWIZZLE TRUE
+#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO
+#define BLDCFG_MEMORY_CLOCK_SELECT DDR800_FREQUENCY
+#define BLDCFG_DQS_TRAINING_CONTROL TRUE
+#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE
+#define BLDCFG_USE_BURST_MODE FALSE
+#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE
+#define BLDCFG_ENABLE_ECC_FEATURE TRUE
+#define BLDCFG_ECC_REDIRECTION TRUE
+#define BLDCFG_SCRUB_DRAM_RATE 0
+#define BLDCFG_SCRUB_L2_RATE 0
+#define BLDCFG_SCRUB_L3_RATE 0
+#define BLDCFG_SCRUB_IC_RATE 0
+#define BLDCFG_SCRUB_DC_RATE 0
+#define BLDCFG_ECC_SYMBOL_SIZE 4
+#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000ul
+#define BLDCFG_ECC_SYNC_FLOOD FALSE
+#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE
+#define BLDCFG_1GB_ALIGN FALSE
+#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE
+#define BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM 375 // PCIE Spread Spectrum default value -0.375%
+#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770
+#define BLDCFG_PMU_TRAINING_MODE PMU_TRAIN_1D
+
+#define BLDOPT_REMOVE_ALIB FALSE
+#define BLDCFG_PLATFORM_CPB_MODE CpbModeDisabled
+#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P'
+#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0'
+#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6
+
+#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 200
+#define BLDCFG_CFG_ABM_SUPPORT 0
+
+//#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770
+
+// Specify the default values for the VRM controlling the VDDNB plane.
+// If not specified, the values used for the core VRM will be applied
+#define BLDCFG_VRM_NB_CURRENT_LIMIT 0xc350 //0xa028 // Not currently used on Trinity
+#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 0 //0x4e20 // Zero - disable NBPSI_L, Non-zero - enable NBPSI_L
+#define BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT 0xfde8 //0xea60
+#define BLDCFG_VRM_NB_SVI_OCP_LEVEL 0x17700
+#define BLDCFG_VRM_NB_SLEW_RATE 0x1388 //0x2710 // 5000 // Used in calculating the VSRampSlamTime
+#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 // Not currently used on Trinity
+//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE 0 // Not currently used on Trinity
+//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 // Not currently used on Trinity
+
+//#define BLDCFG_VRM_NB_CURRENT_LIMIT 60000
+
+//#define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 3
+//#define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 3
+
+#if CONFIG_GFXUMA
+#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED
+#define BLDCFG_UMA_ALLOCATION_MODE UMA_AUTO
+//#define BLDCFG_UMA_ALLOCATION_SIZE 0x1000 //0x1800//0x1000 /* (1000 << 16) = 256M*/
+//#define BLDCFG_UMA_ALLOCATION_SIZE 0x0400 //64M
+#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE
+#endif
+
+#define BLDCFG_IOMMU_SUPPORT TRUE
+
+#define BLDCFG_CFG_GNB_HD_AUDIO TRUE
+//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID
+//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID
+//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID
+
+/* Process the options...
+ * This file include MUST occur AFTER the user option selection settings
+ */
+#define AGESA_ENTRY_INIT_RESET TRUE
+#define AGESA_ENTRY_INIT_RECOVERY FALSE
+#define AGESA_ENTRY_INIT_EARLY TRUE
+#define AGESA_ENTRY_INIT_POST TRUE
+#define AGESA_ENTRY_INIT_ENV TRUE
+#define AGESA_ENTRY_INIT_MID TRUE
+#define AGESA_ENTRY_INIT_LATE TRUE
+#define AGESA_ENTRY_INIT_S3SAVE TRUE
+#define AGESA_ENTRY_INIT_RESUME TRUE //TRUE
+#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE
+#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE
+/*
+ * Customized OEM build configurations for FCH component
+ */
+// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00
+// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20
+// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00
+// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400
+// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404
+// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408
+// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410
+// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420
+// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000
+// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000
+// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000
+// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0
+// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00
+// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000
+// #define BLDCFG_AZALIA_SSID 0x780D1022
+// #define BLDCFG_SMBUS_SSID 0x780B1022
+// #define BLDCFG_IDE_SSID 0x780C1022
+// #define BLDCFG_SATA_AHCI_SSID 0x78011022
+// #define BLDCFG_SATA_IDE_SSID 0x78001022
+// #define BLDCFG_SATA_RAID5_SSID 0x78031022
+// #define BLDCFG_SATA_RAID_SSID 0x78021022
+// #define BLDCFG_EHCI_SSID 0x78081022
+// #define BLDCFG_OHCI_SSID 0x78071022
+// #define BLDCFG_LPC_SSID 0x780E1022
+// #define BLDCFG_SD_SSID 0x78061022
+// #define BLDCFG_XHCI_SSID 0x78121022
+// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE
+// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE
+// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4
+// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE
+// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE
+// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE
+// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE
+
+CONST AP_MTRR_SETTINGS ROMDATA ApMtrrSettingsList[] =
+{
+ { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E },
+ { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E },
+ { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 },
+ { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 },
+ { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 },
+ { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 },
+ { CPU_LIST_TERMINAL }
+};
+
+#define BLDCFG_AP_MTRR_SETTINGS_LIST &ApMtrrSettingsList
+
+/* MEMORY_BUS_SPEED */
+#define DDR400_FREQUENCY 200 ///< DDR 400
+#define DDR533_FREQUENCY 266 ///< DDR 533
+#define DDR667_FREQUENCY 333 ///< DDR 667
+#define DDR800_FREQUENCY 400 ///< DDR 800
+#define DDR1066_FREQUENCY 533 ///< DDR 1066
+#define DDR1333_FREQUENCY 667 ///< DDR 1333
+#define DDR1600_FREQUENCY 800 ///< DDR 1600
+#define DDR1866_FREQUENCY 933 ///< DDR 1866
+#define DDR2100_FREQUENCY 1050 ///< DDR 2100
+#define DDR2133_FREQUENCY 1066 ///< DDR 2133
+#define DDR2400_FREQUENCY 1200 ///< DDR 2400
+#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency
+
+/* QUANDRANK_TYPE*/
+#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM
+#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM
+
+/* USER_MEMORY_TIMING_MODE */
+#define TIMING_MODE_AUTO 0 ///< Use best rate possible
+#define TIMING_MODE_LIMITED 1 ///< Set user top limit
+#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed
+
+/* POWER_DOWN_MODE */
+#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode
+#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode
+
+/*
+ * Agesa optional capabilities selection.
+ * Uncomment and mark FALSE those features you wish to include in the build.
+ * Comment out or mark TRUE those features you want to REMOVE from the build.
+ */
+
+#define DFLT_SMBUS0_BASE_ADDRESS 0xB00
+#define DFLT_SMBUS1_BASE_ADDRESS 0xB20
+#define DFLT_SIO_PME_BASE_ADDRESS 0xE00
+#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800
+#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804
+#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808
+#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810
+#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820
+#define DFLT_SPI_BASE_ADDRESS 0xFEC10000
+#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0
+#define DFLT_HPET_BASE_ADDRESS 0xFED00000
+#define DFLT_SMI_CMD_PORT 0xB0
+#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00
+#define DFLT_GEC_BASE_ADDRESS 0xFED61000
+#define DFLT_AZALIA_SSID 0x780D1022
+#define DFLT_SMBUS_SSID 0x780B1022
+#define DFLT_IDE_SSID 0x780C1022
+#define DFLT_SATA_AHCI_SSID 0x78011022
+#define DFLT_SATA_IDE_SSID 0x78001022
+#define DFLT_SATA_RAID5_SSID 0x78031022
+#define DFLT_SATA_RAID_SSID 0x78021022
+#define DFLT_EHCI_SSID 0x78081022
+#define DFLT_OHCI_SSID 0x78071022
+#define DFLT_LPC_SSID 0x780E1022
+#define DFLT_SD_SSID 0x78061022
+#define DFLT_XHCI_SSID 0x78121022
+#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE
+#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE
+#define DFLT_FCH_GPP_LINK_CONFIG PortA1B1C1D1
+#define DFLT_FCH_GPP_PORT0_PRESENT FALSE //TRUE
+#define DFLT_FCH_GPP_PORT1_PRESENT TRUE
+#define DFLT_FCH_GPP_PORT2_PRESENT TRUE
+#define DFLT_FCH_GPP_PORT3_PRESENT TRUE
+#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE
+//#define BLDCFG_IR_PIN_CONTROL 0x33
+
+#include "PlatformGnbPcieComplex.h"
+GPIO_CONTROL gpio[] = {
+ #if !PCIE_DP4_MUX
+ {50, Function0, 0x08},
+ #endif
+ {166, Function0, 0x18}, /* TODO: pull up. */
+ {-1}
+};
+#define BLDCFG_FCH_GPIO_CONTROL_LIST (gpio)
+
+// The following definitions specify the default values for various parameters in which there are
+// no clearly defined defaults to be used in the common file. The values below are based on product
+// and BKDG content, please consult the AGESA Memory team for consultation.
+#define DFLT_SCRUB_DRAM_RATE (0)
+#define DFLT_SCRUB_L2_RATE (0)
+#define DFLT_SCRUB_L3_RATE (0)
+#define DFLT_SCRUB_IC_RATE (0)
+#define DFLT_SCRUB_DC_RATE (0)
+#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define DFLT_VRM_SLEW_RATE (5000)
+
+#if IS_ENABLED(INSTALL_FM2r2_SOCKET_SUPPORT) || IS_ENABLED(INSTALL_FM2_SOCKET_SUPPORT)
+#include "KaveriFm2r2Install.h"
+#else
+#include "KaveriFp3Install.h"
+#endif
+
+//#include "PlatformInstall.h"
+
+/*----------------------------------------------------------------------------------------
+ * CUSTOMER OVERIDES MEMORY TABLE
+ *----------------------------------------------------------------------------------------
+ */
+
+BOOLEAN
+IdsErrorStop (
+ IN UINT32 filecode
+ )
+{
+ IDS_DEADLOOP();
+ return FALSE;
+}
+
+/*
+ * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
+ * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
+ * is populated, AGESA will base its settings on the data from the table. Otherwise, it will
+ * use its default conservative settings.
+ */
+CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
+ //
+ // The following macros are supported (use comma to separate macros):
+ //
+ // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap)
+ // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap.
+ // AGESA will base on this value to disable unused MemClk to save power.
+ // Example:
+ // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below:
+ // Bit AM3/S1g3 pin name
+ // 0 M[B,A]_CLK_H/L[0]
+ // 1 M[B,A]_CLK_H/L[1]
+ // 2 M[B,A]_CLK_H/L[2]
+ // 3 M[B,A]_CLK_H/L[3]
+ // 4 M[B,A]_CLK_H/L[4]
+ // 5 M[B,A]_CLK_H/L[5]
+ // 6 M[B,A]_CLK_H/L[6]
+ // 7 M[B,A]_CLK_H/L[7]
+ // And platform has the following routing:
+ // CS0 M[B,A]_CLK_H/L[4]
+ // CS1 M[B,A]_CLK_H/L[2]
+ // CS2 M[B,A]_CLK_H/L[3]
+ // CS3 M[B,A]_CLK_H/L[5]
+ // Then platform can specify the following macro:
+ // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00)
+ //
+ // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap)
+ // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap.
+ // AGESA will base on this value to tristate unused CKE to save power.
+ //
+ // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap)
+ // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap.
+ // AGESA will base on this value to tristate unused ODT pins to save power.
+ //
+ // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap)
+ // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap.
+ // AGESA will base on this value to tristate unused Chip select to save power.
+ //
+ // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel)
+ // Specifies the number of DIMM slots per channel.
+ //
+ // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel)
+ // Specifies the number of Chip selects per channel.
+ //
+ // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket)
+ // Specifies the number of channels per socket.
+ //
+ // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED)
+ // Specifies DDR bus speed of channel ChannelID on socket SocketID.
+ //
+ // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE)
+ // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...)
+ //
+ // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+ // Byte6Seed, Byte7Seed, ByteEccSeed)
+ // Specifies the write leveling seed for a channel of a socket.
+ //
+ // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+ // Byte6Seed, Byte7Seed, ByteEccSeed)
+ // Speicifes the HW RXEN training seed for a channel of a socket
+ //
+// NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 1),
+// NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2),
+//
+// // Signal routing for AMD reference board
+// MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
+// CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A, 0xFF, 0xFF),
+// ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08),
+// CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00),
+//
+// // CPUID TN
+// CPU_FAMILY_TO_OVERRIDE (0x00610F00ul),
+// NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
+// NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2),
+// MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x04, 0x01, 0x02, 0x08, 0x00, 0x00, 0x00, 0x00),
+//
+// // CPUID RL
+// CPU_FAMILY_TO_OVERRIDE (0x00610F01ul),
+// NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
+// NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2),
+// MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x04, 0x01, 0x02, 0x08, 0x00, 0x00, 0x00, 0x00),
+//
+// // CPUID KV
+// CPU_FAMILY_TO_OVERRIDE (0x00630F00ul),
+ NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
+ NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2),
+ MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x04, 0x01, 0x02, 0x08, 0x00, 0x00, 0x00, 0x00),
+ // CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A, 0xFF, 0xFF),
+ // ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08),
+ // CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x04, 0x08, 0x00, 0x00, 0x00, 0x00),
+
+ PSO_END
+};
+
+/*
+ * These tables are optional and may be used to adjust memory timing settings
+ */
+#include "mm.h"
+#include "mn.h"
+
+// Customer table
+UINT8 AGESA_MEM_TABLE_KV[][sizeof (MEM_TABLE_ALIAS)] =
+{
+ // Hardcoded Memory Training Values
+
+ // The following macro should be used to override training values for your platform
+ //
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
+ //
+ // NOTE:
+ // The following training hardcode values are example values that were taken from a tilapia motherboard
+ // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in
+ // the table and replace the byte lane values with your own.
+ //
+ // ------------------ BYTE LANES ----------------------
+ // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC
+ // Write Data Timing
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
+
+ // DQS Receiver Enable
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
+
+ // Write DQS Delays
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
+
+ // Read DQS Delays
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
+ //--------------------------------------------------------------------------------------------------------------------------------------------------
+ // TABLE END
+ NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table
+};
+UINT8 SizeOfTableKV = sizeof (AGESA_MEM_TABLE_KV) / sizeof (AGESA_MEM_TABLE_KV[0]);
diff --git a/src/mainboard/amd/lamar/buildOpts.c.bak b/src/mainboard/amd/lamar/buildOpts.c.bak
new file mode 100644
index 0000000..d6ea4f0
--- /dev/null
+++ b/src/mainboard/amd/lamar/buildOpts.c.bak
@@ -0,0 +1,530 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/**
+ * @file
+ *
+ * AMD User options selection for a Brazos platform solution system
+ *
+ * This file is placed in the user's platform directory and contains the
+ * build option selections desired for that platform.
+ *
+ * For Information about this file, see @ref platforminstall.
+ *
+ * @xrefitem bom "File Content Label" "Release Content"
+ * @e project: AGESA
+ * @e sub-project: Core
+ * @e \$Revision: 23714 $ @e \$Date: 2009-12-09 17:28:37 -0600 (Wed, 09 Dec 2009) $
+ */
+
+#include "AGESA.h"
+//#include "CommonReturns.h"
+#include "Filecode.h"
+#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE
+
+/* Select the cpu family. */
+#define INSTALL_FAMILY_10_SUPPORT FALSE
+#define INSTALL_FAMILY_12_SUPPORT FALSE
+#define INSTALL_FAMILY_14_SUPPORT FALSE
+
+
+/* Select the cpu socket type. */
+#define INSTALL_G34_SOCKET_SUPPORT FALSE
+#define INSTALL_C32_SOCKET_SUPPORT FALSE
+#define INSTALL_S1G3_SOCKET_SUPPORT FALSE
+#define INSTALL_S1G4_SOCKET_SUPPORT FALSE
+#define INSTALL_ASB2_SOCKET_SUPPORT FALSE
+#define INSTALL_FS1_SOCKET_SUPPORT FALSE
+#define INSTALL_FM1_SOCKET_SUPPORT FALSE
+#define INSTALL_FP2_SOCKET_SUPPORT FALSE
+#define INSTALL_FT1_SOCKET_SUPPORT FALSE
+#define INSTALL_AM3_SOCKET_SUPPORT FALSE
+//INSTALL_FS1_SOCKET_SUPPORT
+//INSTALL_FS1_SOCKET_SUPPORT
+#define INSTALL_FM2_SOCKET_SUPPORT FALSE
+#define INSTALL_FP3_SOCKET_SUPPORT TRUE
+
+#define INSTALL_FAMILY_15_MODEL_1x_SUPPORT FALSE
+#define INSTALL_FAMILY_15_MODEL_3x_SUPPORT TRUE
+
+#ifdef BLDOPT_REMOVE_FAMILY_15_MODEL_1x_SUPPORT
+ #if BLDOPT_REMOVE_FAMILY_15_MODEL_1x_SUPPORT == TRUE
+ #undef INSTALL_FAMILY_15_MODEL_1x_SUPPORT
+ #define INSTALL_FAMILY_15_MODEL_1x_SUPPORT FALSE
+ #endif
+#endif
+
+#ifdef BLDOPT_REMOVE_FAMILY_15_MODEL_3x_SUPPORT
+ #if BLDOPT_REMOVE_FAMILY_15_MODEL_3x_SUPPORT == TRUE
+ #undef INSTALL_FAMILY_15_MODEL_3x_SUPPORT
+ #define INSTALL_FAMILY_15_MODEL_3x_SUPPORT FALSE
+ #endif
+#endif
+
+//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE
+#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE
+#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE
+//#define BLDOPT_REMOVE_ECC_SUPPORT FALSE
+//#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE
+//#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE
+#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE
+#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE
+#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE
+//#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE
+#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE
+//#define BLDOPT_REMOVE_ACPI_PSTATES FALSE
+#define BLDOPT_REMOVE_SRAT TRUE
+#define BLDOPT_REMOVE_SLIT TRUE
+#define BLDOPT_REMOVE_WHEA TRUE
+//#define BLDOPT_REMOVE_CRAT TRUE
+//#define BLDOPT_REMOVE_DMI FALSE //TRUE
+#define BLDOPT_REMOVE_EARLY_SAMPLES FALSE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE
+//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE
+
+//This element selects whether P-States should be forced to be independent,
+// as reported by the ACPI _PSD object. For single-link processors,
+// setting TRUE for OS to support this feature.
+
+//#define BLDCFG_FORCE_INDEPENDENT_PSD_OBJECT TRUE
+
+#define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS
+#define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER
+/* Build configuration values here.
+ */
+#define BLDCFG_VRM_CURRENT_LIMIT 0xd6d8 //0x15f90 //55000
+#define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 //0x4e20
+#define BLDCFG_VRM_MAXIMUM_CURRENT_LIMIT 0x13880 // 0x1d4c0 // 80000
+#define BLDCFG_VRM_SVI_OCP_LEVEL 0 //0x23280
+#define BLDCFG_VRM_SLEW_RATE 0x1388 //0x2710
+#define BLDCFG_VRM_ADDITIONAL_DELAY 0
+#define BLDCFG_PLAT_NUM_IO_APICS 3
+#define BLDCFG_GNB_IOAPIC_ADDRESS 0xFEC20000
+#define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST
+#define BLDCFG_MEM_INIT_PSTATE 0
+
+#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE
+
+#define BLDCFG_DIMM_TYPE_USED_IN_MIXED_CONFIG DDR3_TECHNOLOGY
+#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR2133_FREQUENCY
+#define BLDCFG_MEMORY_MODE_UNGANGED TRUE
+#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE
+#define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE
+#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE
+#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE
+#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING TRUE
+#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE
+#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE
+#define BLDCFG_MEMORY_POWER_DOWN TRUE
+#define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHIP_SELECT
+#define BLDCFG_ONLINE_SPARE FALSE
+#define BLDCFG_BANK_SWIZZLE TRUE
+#define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO
+#define BLDCFG_MEMORY_CLOCK_SELECT DDR800_FREQUENCY
+#define BLDCFG_DQS_TRAINING_CONTROL TRUE
+#define BLDCFG_IGNORE_SPD_CHECKSUM FALSE
+#define BLDCFG_USE_BURST_MODE FALSE
+#define BLDCFG_MEMORY_ALL_CLOCKS_ON FALSE
+#define BLDCFG_ENABLE_ECC_FEATURE TRUE
+#define BLDCFG_ECC_REDIRECTION TRUE
+#define BLDCFG_SCRUB_DRAM_RATE 0
+#define BLDCFG_SCRUB_L2_RATE 0
+#define BLDCFG_SCRUB_L3_RATE 0
+#define BLDCFG_SCRUB_IC_RATE 0
+#define BLDCFG_SCRUB_DC_RATE 0
+#define BLDCFG_ECC_SYMBOL_SIZE 4
+#define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000
+#define BLDCFG_ECC_SYNC_FLOOD FALSE
+#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE
+#define BLDCFG_1GB_ALIGN FALSE
+#define BLDCFG_VRM_HIGH_SPEED_ENABLE TRUE
+#define BLDCFG_PCIE_REFCLK_SPREAD_SPECTRUM 375 // PCIE Spread Spectrum default value -0.375%
+#define BLDCFG_PLATFORM_CSTATE_IO_BASE_ADDRESS 0x1770
+#define BLDCFG_PMU_TRAINING_MODE PMU_TRAIN_1D
+
+#define BLDOPT_REMOVE_ALIB FALSE
+#define BLDCFG_PLATFORM_CPB_MODE CpbModeDisabled
+#define BLDCFG_PROCESSOR_SCOPE_NAME0 'P'
+#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0'
+#define BLDCFG_PLATFORM_CSTATE_MODE CStateModeC6
+
+#define BLDCFG_CFG_LCD_BACK_LIGHT_CONTROL 200
+#define BLDCFG_CFG_ABM_SUPPORT 0
+
+//#define BLDCFG_PLATFORM_CSTATE_OPDATA 0x1770
+
+// Specify the default values for the VRM controlling the VDDNB plane.
+// If not specified, the values used for the core VRM will be applied
+#define BLDCFG_VRM_NB_CURRENT_LIMIT 0xc350 //0xa028 // Not currently used on Trinity
+#define BLDCFG_VRM_NB_LOW_POWER_THRESHOLD 0 //0x4e20 // Zero - disable NBPSI_L, Non-zero - enable NBPSI_L
+#define BLDCFG_VRM_NB_MAXIMUM_CURRENT_LIMIT 0xfde8 //0xea60
+#define BLDCFG_VRM_NB_SVI_OCP_LEVEL 0x17700
+#define BLDCFG_VRM_NB_SLEW_RATE 0x1388 //0x2710 // 5000 // Used in calculating the VSRampSlamTime
+#define BLDCFG_VRM_NB_ADDITIONAL_DELAY 0 // Not currently used on Trinity
+//#define BLDCFG_VRM_NB_HIGH_SPEED_ENABLE 0 // Not currently used on Trinity
+//#define BLDCFG_VRM_NB_INRUSH_CURRENT_LIMIT 0 // Not currently used on Trinity
+
+//#define BLDCFG_VRM_NB_CURRENT_LIMIT 60000
+
+//#define BLDCFG_LVDS_POWER_ON_SEQ_VARY_BL_TO_BLON 3
+//#define BLDCFG_LVDS_POWER_ON_SEQ_BLON_TO_VARY_BL 3
+
+#if CONFIG_GFXUMA
+#define BLDCFG_UMA_ALIGNMENT UMA_4MB_ALIGNED
+#define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED
+//#define BLDCFG_UMA_ALLOCATION_SIZE 0x1000//0x1800//0x1000 /* (1000 << 16) = 256M*/
+#define BLDCFG_UMA_ALLOCATION_SIZE 0x2000//512M
+#define BLDCFG_UMA_ABOVE4G_SUPPORT FALSE
+#endif
+
+#define BLDCFG_IOMMU_SUPPORT TRUE
+
+#define BLDCFG_CFG_GNB_HD_AUDIO FALSE
+//#define BLDCFG_IGPU_SUBSYSTEM_ID OEM_IGPU_SSID
+//#define BLDCFG_IGPU_HD_AUDIO_SUBSYSTEM_ID OEM_IGPU_HD_AUDIO_SSID
+//#define BLFCFG_APU_PCIE_PORTS_SUBSYSTEM_ID OEM_APU_PCIE_PORTS_SSID
+
+/* Process the options...
+ * This file include MUST occur AFTER the user option selection settings
+ */
+#define AGESA_ENTRY_INIT_RESET TRUE
+#define AGESA_ENTRY_INIT_RECOVERY FALSE
+#define AGESA_ENTRY_INIT_EARLY TRUE
+#define AGESA_ENTRY_INIT_POST TRUE
+#define AGESA_ENTRY_INIT_ENV TRUE
+#define AGESA_ENTRY_INIT_MID TRUE
+#define AGESA_ENTRY_INIT_LATE TRUE
+#define AGESA_ENTRY_INIT_S3SAVE TRUE
+#define AGESA_ENTRY_INIT_RESUME TRUE //TRUE
+#define AGESA_ENTRY_INIT_LATE_RESTORE TRUE
+#define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE
+/*
+ * Customized OEM build configurations for FCH component
+ */
+// #define BLDCFG_SMBUS0_BASE_ADDRESS 0xB00
+// #define BLDCFG_SMBUS1_BASE_ADDRESS 0xB20
+// #define BLDCFG_SIO_PME_BASE_ADDRESS 0xE00
+// #define BLDCFG_ACPI_PM1_EVT_BLOCK_ADDRESS 0x400
+// #define BLDCFG_ACPI_PM1_CNT_BLOCK_ADDRESS 0x404
+// #define BLDCFG_ACPI_PM_TMR_BLOCK_ADDRESS 0x408
+// #define BLDCFG_ACPI_CPU_CNT_BLOCK_ADDRESS 0x410
+// #define BLDCFG_ACPI_GPE0_BLOCK_ADDRESS 0x420
+// #define BLDCFG_SPI_BASE_ADDRESS 0xFEC10000
+// #define BLDCFG_WATCHDOG_TIMER_BASE 0xFEC00000
+// #define BLDCFG_HPET_BASE_ADDRESS 0xFED00000
+// #define BLDCFG_SMI_CMD_PORT_ADDRESS 0xB0
+// #define BLDCFG_ACPI_PMA_BLK_ADDRESS 0xFE00
+// #define BLDCFG_ROM_BASE_ADDRESS 0xFED61000
+// #define BLDCFG_AZALIA_SSID 0x780D1022
+// #define BLDCFG_SMBUS_SSID 0x780B1022
+// #define BLDCFG_IDE_SSID 0x780C1022
+// #define BLDCFG_SATA_AHCI_SSID 0x78011022
+// #define BLDCFG_SATA_IDE_SSID 0x78001022
+// #define BLDCFG_SATA_RAID5_SSID 0x78031022
+// #define BLDCFG_SATA_RAID_SSID 0x78021022
+// #define BLDCFG_EHCI_SSID 0x78081022
+// #define BLDCFG_OHCI_SSID 0x78071022
+// #define BLDCFG_LPC_SSID 0x780E1022
+// #define BLDCFG_SD_SSID 0x78061022
+// #define BLDCFG_XHCI_SSID 0x78121022
+// #define BLDCFG_FCH_PORT80_BEHIND_PCIB FALSE
+// #define BLDCFG_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE
+// #define BLDCFG_FCH_GPP_LINK_CONFIG PortA4
+// #define BLDCFG_FCH_GPP_PORT0_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT1_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT2_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT3_PRESENT FALSE
+// #define BLDCFG_FCH_GPP_PORT0_HOTPLUG FALSE
+// #define BLDCFG_FCH_GPP_PORT1_HOTPLUG FALSE
+// #define BLDCFG_FCH_GPP_PORT2_HOTPLUG FALSE
+// #define BLDCFG_FCH_GPP_PORT3_HOTPLUG FALSE
+
+CONST AP_MTRR_SETTINGS ROMDATA LamarApMtrrSettingsList[] =
+{
+ { AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E },
+ { AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E },
+ { AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000 },
+ { AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818 },
+ { AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818 },
+ { AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818 },
+ { AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818 },
+ { CPU_LIST_TERMINAL }
+};
+
+#define BLDCFG_AP_MTRR_SETTINGS_LIST &LamarApMtrrSettingsList
+
+//#include "VirgoInstall.h"
+
+/* Include the files that instantiate the configuration definitions. */
+#include "cpuRegisters.h"
+#include "cpuFamRegisters.h"
+#include "cpuFamilyTranslation.h"
+#include "AdvancedApi.h"
+#include "heapManager.h"
+#include "CreateStruct.h"
+#include "cpuFeatures.h"
+#include "Table.h"
+#include "CommonReturns.h"
+#include "cpuEarlyInit.h"
+#include "cpuLateInit.h"
+#include "GnbInterface.h"
+
+ // This is the delivery package title, "BrazosPI"
+ // This string MUST be exactly 8 characters long
+#define AGESA_PACKAGE_STRING {'c', 'b', '_', 'A', 'g', 'e', 's', 'a'}
+
+ // This is the release version number of the AGESA component
+ // This string MUST be exactly 12 characters long
+#define AGESA_VERSION_STRING {'V', '0', '.', '0', '.', '0', '.', '1', ' ', ' ', ' ', ' '}
+
+/* MEMORY_BUS_SPEED */
+#define DDR400_FREQUENCY 200 ///< DDR 400
+#define DDR533_FREQUENCY 266 ///< DDR 533
+#define DDR667_FREQUENCY 333 ///< DDR 667
+#define DDR800_FREQUENCY 400 ///< DDR 800
+#define DDR1066_FREQUENCY 533 ///< DDR 1066
+#define DDR1333_FREQUENCY 667 ///< DDR 1333
+#define DDR1600_FREQUENCY 800 ///< DDR 1600
+#define DDR1866_FREQUENCY 933 ///< DDR 1866
+#define DDR2100_FREQUENCY 1050 ///< DDR 2100
+#define DDR2133_FREQUENCY 1066 ///< DDR 2133
+#define DDR2400_FREQUENCY 1200 ///< DDR 2400
+#define UNSUPPORTED_DDR_FREQUENCY 1201 ///< Highest limit of DDR frequency
+
+/* QUANDRANK_TYPE*/
+#define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM
+#define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM
+
+/* USER_MEMORY_TIMING_MODE */
+#define TIMING_MODE_AUTO 0 ///< Use best rate possible
+#define TIMING_MODE_LIMITED 1 ///< Set user top limit
+#define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed
+
+/* POWER_DOWN_MODE */
+#define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode
+#define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode
+
+/*
+ * Agesa optional capabilities selection.
+ * Uncomment and mark FALSE those features you wish to include in the build.
+ * Comment out or mark TRUE those features you want to REMOVE from the build.
+ */
+
+#define DFLT_SMBUS0_BASE_ADDRESS 0xB00
+#define DFLT_SMBUS1_BASE_ADDRESS 0xB20
+#define DFLT_SIO_PME_BASE_ADDRESS 0xE00
+#define DFLT_ACPI_PM1_EVT_BLOCK_ADDRESS 0x800
+#define DFLT_ACPI_PM1_CNT_BLOCK_ADDRESS 0x804
+#define DFLT_ACPI_PM_TMR_BLOCK_ADDRESS 0x808
+#define DFLT_ACPI_CPU_CNT_BLOCK_ADDRESS 0x810
+#define DFLT_ACPI_GPE0_BLOCK_ADDRESS 0x820
+#define DFLT_SPI_BASE_ADDRESS 0xFEC10000
+#define DFLT_WATCHDOG_TIMER_BASE_ADDRESS 0xFEC000F0
+#define DFLT_HPET_BASE_ADDRESS 0xFED00000
+#define DFLT_SMI_CMD_PORT 0xB0
+#define DFLT_ACPI_PMA_CNT_BLK_ADDRESS 0xFE00
+#define DFLT_GEC_BASE_ADDRESS 0xFED61000
+#define DFLT_AZALIA_SSID 0x780D1022
+#define DFLT_SMBUS_SSID 0x780B1022
+#define DFLT_IDE_SSID 0x780C1022
+#define DFLT_SATA_AHCI_SSID 0x78011022
+#define DFLT_SATA_IDE_SSID 0x78001022
+#define DFLT_SATA_RAID5_SSID 0x78031022
+#define DFLT_SATA_RAID_SSID 0x78021022
+#define DFLT_EHCI_SSID 0x78081022
+#define DFLT_OHCI_SSID 0x78071022
+#define DFLT_LPC_SSID 0x780E1022
+#define DFLT_SD_SSID 0x78061022
+#define DFLT_XHCI_SSID 0x78121022
+#define DFLT_FCH_PORT80_BEHIND_PCIB FALSE
+#define DFLT_FCH_ENABLE_ACPI_SLEEP_TRAP TRUE
+#define DFLT_FCH_GPP_LINK_CONFIG PortA1B1C1D1
+#define DFLT_FCH_GPP_PORT0_PRESENT FALSE //TRUE
+#define DFLT_FCH_GPP_PORT1_PRESENT TRUE
+#define DFLT_FCH_GPP_PORT2_PRESENT TRUE
+#define DFLT_FCH_GPP_PORT3_PRESENT TRUE
+#define DFLT_FCH_GPP_PORT0_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT1_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT2_HOTPLUG FALSE
+#define DFLT_FCH_GPP_PORT3_HOTPLUG FALSE
+//#define BLDCFG_IR_PIN_CONTROL 0x33
+
+#include "PlatformGnbPcieComplex.h"
+GPIO_CONTROL lamar_gpio[] = {
+ #if !PCIE_DP4_MUX
+ {50, Function0, 0x08},
+ #endif
+ {166, Function0, 0x18}, /* TODO: pull up. */
+ {-1}
+};
+#define BLDCFG_FCH_GPIO_CONTROL_LIST (&lamar_gpio[0])
+
+// The following definitions specify the default values for various parameters in which there are
+// no clearly defined defaults to be used in the common file. The values below are based on product
+// and BKDG content, please consult the AGESA Memory team for consultation.
+#define DFLT_SCRUB_DRAM_RATE (0)
+#define DFLT_SCRUB_L2_RATE (0)
+#define DFLT_SCRUB_L3_RATE (0)
+#define DFLT_SCRUB_IC_RATE (0)
+#define DFLT_SCRUB_DC_RATE (0)
+#define DFLT_MEMORY_QUADRANK_TYPE QUADRANK_UNBUFFERED
+#define DFLT_VRM_SLEW_RATE (5000)
+
+#include "PlatformInstall.h"
+
+/*----------------------------------------------------------------------------------------
+ * CUSTOMER OVERIDES MEMORY TABLE
+ *----------------------------------------------------------------------------------------
+ */
+
+/*
+ * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
+ * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
+ * is populated, AGESA will base its settings on the data from the table. Otherwise, it will
+ * use its default conservative settings.
+ */
+CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
+ //
+ // The following macros are supported (use comma to separate macros):
+ //
+ // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap)
+ // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap.
+ // AGESA will base on this value to disable unused MemClk to save power.
+ // Example:
+ // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below:
+ // Bit AM3/S1g3 pin name
+ // 0 M[B,A]_CLK_H/L[0]
+ // 1 M[B,A]_CLK_H/L[1]
+ // 2 M[B,A]_CLK_H/L[2]
+ // 3 M[B,A]_CLK_H/L[3]
+ // 4 M[B,A]_CLK_H/L[4]
+ // 5 M[B,A]_CLK_H/L[5]
+ // 6 M[B,A]_CLK_H/L[6]
+ // 7 M[B,A]_CLK_H/L[7]
+ // And platform has the following routing:
+ // CS0 M[B,A]_CLK_H/L[4]
+ // CS1 M[B,A]_CLK_H/L[2]
+ // CS2 M[B,A]_CLK_H/L[3]
+ // CS3 M[B,A]_CLK_H/L[5]
+ // Then platform can specify the following macro:
+ // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00)
+ //
+ // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap)
+ // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap.
+ // AGESA will base on this value to tristate unused CKE to save power.
+ //
+ // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap)
+ // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap.
+ // AGESA will base on this value to tristate unused ODT pins to save power.
+ //
+ // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap)
+ // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap.
+ // AGESA will base on this value to tristate unused Chip select to save power.
+ //
+ // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel)
+ // Specifies the number of DIMM slots per channel.
+ //
+ // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel)
+ // Specifies the number of Chip selects per channel.
+ //
+ // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket)
+ // Specifies the number of channels per socket.
+ //
+ // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED)
+ // Specifies DDR bus speed of channel ChannelID on socket SocketID.
+ //
+ // DRAM_TECHNOLOGY(SocketID, TECHNOLOGY_TYPE)
+ // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...)
+ //
+ // WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+ // Byte6Seed, Byte7Seed, ByteEccSeed)
+ // Specifies the write leveling seed for a channel of a socket.
+ //
+ // HW_RXEN_SEED(SocketID, ChannelID, DimmID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
+ // Byte6Seed, Byte7Seed, ByteEccSeed)
+ // Speicifes the HW RXEN training seed for a channel of a socket
+ //
+ NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2),
+ NUMBER_OF_CHANNELS_SUPPORTED (ANY_SOCKET, 2),
+ MEMCLK_DIS_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
+ CKE_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x05, 0x0A, 0xFF, 0xFF),
+ ODT_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00),
+ CS_TRI_MAP (ANY_SOCKET, ANY_CHANNEL, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),
+
+ PSO_END
+};
+
+/*
+ * These tables are optional and may be used to adjust memory timing settings
+ */
+#include "mm.h"
+#include "mn.h"
+
+// Customer table
+UINT8 AGESA_MEM_TABLE_KV[][sizeof (MEM_TABLE_ALIAS)] =
+{
+ // Hardcoded Memory Training Values
+
+ // The following macro should be used to override training values for your platform
+ //
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
+ //
+ // NOTE:
+ // The following training hardcode values are example values that were taken from a tilapia motherboard
+ // with a particular DIMM configuration. To hardcode your own values, uncomment the appropriate line in
+ // the table and replace the byte lane values with your own.
+ //
+ // ------------------ BYTE LANES ----------------------
+ // BL0 BL1 BL2 BL3 BL4 BL5 BL6 Bl7 ECC
+ // Write Data Timing
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
+ // DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1
+
+ // DQS Receiver Enable
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x7C, 0x7D, 0x7E, 0x81, 0x88, 0x8F, 0x96, 0x9F, 0x84),// DCT0, DIMM1
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
+ // DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x1C, 0x1D, 0x1E, 0x01, 0x08, 0x0F, 0x16, 0x1F, 0x04),// DCT1, DIMM1
+
+ // Write DQS Delays
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1
+
+ // Read DQS Delays
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
+ // DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
+ //--------------------------------------------------------------------------------------------------------------------------------------------------
+ // TABLE END
+ NBACCESS (MTEnd, 0, 0, 0, 0, 0), // End of Table
+};
+UINT8 SizeOfTablekv = sizeof (AGESA_MEM_TABLE_KV) / sizeof (AGESA_MEM_TABLE_KV[0]);
diff --git a/src/mainboard/amd/lamar/cmos.layout b/src/mainboard/amd/lamar/cmos.layout
new file mode 100644
index 0000000..5520564
--- /dev/null
+++ b/src/mainboard/amd/lamar/cmos.layout
@@ -0,0 +1,114 @@
+#*****************************************************************************
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#*****************************************************************************
+
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 multi_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 amd_reserved
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+8 0 400Mhz
+8 1 333Mhz
+8 2 266Mhz
+8 3 200Mhz
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
diff --git a/src/mainboard/amd/lamar/devicetree.cb b/src/mainboard/amd/lamar/devicetree.cb
new file mode 100644
index 0000000..ff05048
--- /dev/null
+++ b/src/mainboard/amd/lamar/devicetree.cb
@@ -0,0 +1,113 @@
+#
+# This file is part of the coreboot project.
+#
+# Copyright (C) 2012 Advanced Micro Devices, Inc.
+# 2013 - 2014 Sage Electronic Engineering, LLC
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+chip northbridge/amd/agesa/family15_0x30/root_complex
+
+ device cpu_cluster 0 on
+ chip cpu/amd/agesa/family15_0x30
+ device lapic 10 on end
+ end
+ end
+
+ device domain 0 on
+ subsystemid 0x1022 0x1410 inherit
+ chip northbridge/amd/agesa/family15_0x30 # CPU side of HT root complex
+
+ chip northbridge/amd/agesa/family15_0x30 # PCI side of HT root complex
+ device pci 0.0 on end # 0x1422 Root Complex
+ device pci 0.2 on end # 0x1423 IOMMU
+ device pci 1.0 on end # 0x13XX Internal Graphics
+ device pci 1.1 on end # 0x1308 DisplayPort/HDMI Audio
+ device pci 2.0 on end # 0x1424 GFX PCIe Host Bridge
+ device pci 2.1 on end # 0x1425 P2P Bridge for GFX PCIe Port 0
+ device pci 2.2 on end # 0x1425 P2P Bridge for GFX PCIe Port 1
+ device pci 3.0 on end # 0x1424 GPP PCIe Host Bridge
+ device pci 3.1 on end # 0x1426 P2P Bridge for GPP PCIe Port 0
+ device pci 3.2 on end # 0x1426 P2P Bridge for GPP PCIe Port 1
+ device pci 3.3 on end # 0x1426 P2P Bridge for GPP PCIe Port 2
+ device pci 3.4 on end # 0x1426 P2P Bridge for GPP PCIe Port 3
+ device pci 3.5 on end # 0x1426 P2P Bridge for GPP PCIe Port 4
+ device pci 4.0 on end # 0x1424 UMI PCIe Host Bridge
+ device pci 4.1 on end # 0x1426 P2P bridge for UMI link
+ device pci 7.0 on end # LAN
+ device pci 8.0 off end # NB/SB Link P2P bridge
+ end
+
+ chip southbridge/amd/agesa/hudson
+ device pci 10.0 on end # 0x7814 XHCI HC0
+ device pci 10.1 on end # 0x7814 XHCI HC1
+ device pci 11.0 on end # 0x7800-0x7805 SATA (device ID depends on mode)
+ device pci 12.0 on end # 0x7807 USB OHCI
+ device pci 12.2 on end # 0x7808 USB EHCI
+ device pci 13.0 on end # 0x7807 USB OHCI
+ device pci 13.2 on end # 0x7808 USB EHCI
+ device pci 14.0 on # 0x780B SMBus
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+ end # SM
+ device pci 14.1 on end # 0x780C IDE
+ device pci 14.2 on end # 0x780D HDA
+ device pci 14.3 on # 0x780E LPC
+ chip superio/fintek/f81216h
+ device pnp 4e.0 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 3
+ end
+ device pnp 4e.1 off # COM2
+ io 0x60 = 0x2f8
+ irq 0x70 = 4
+ end
+ end # f81865f
+ end #LPC
+ device pci 14.4 on end # 0x780F PCI :: PCI-b conflict with GPIO.
+ device pci 14.5 on end # 0x7809 USB OHCI
+ device pci 14.7 on end # 0x7806 SD Flash Controller
+ device pci 15.0 off end # 0x43A0 SB GPP Port 0
+ device pci 15.1 off end # 0x43A1 SB GPP Port 1
+ device pci 15.2 off end # 0x43A2 SB GPP Port 2
+ device pci 15.3 off end # 0x43A3 SB GPP Port 3
+ register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
+ register "gpp_configuration" = "4"
+ end #southbridge/amd/hudson
+
+ device pci 18.0 on end # 0x141A HT Configuration
+ device pci 18.1 on end # 0x141B Address Maps
+ device pci 18.2 on end # 0x141C DRAM Configuration
+ device pci 18.3 on end # 0x141D Miscellaneous
+ device pci 18.4 on end # 0x141E Power Management
+ device pci 18.5 on end # 0x141F Northbridge
+
+ register "spdAddrLookup" = "
+ {
+ { {0xA0, 0xA4}, {0xA2, 0xA6}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
+ }"
+
+ end #chip northbridge/amd/agesa/family15_0x30 # CPU side of HT root complex
+ end #pci_domain
+end #northbridge/amd/agesa/family15_0x30/root_complex
diff --git a/src/mainboard/amd/lamar/dsdt.asl b/src/mainboard/amd/lamar/dsdt.asl
new file mode 100644
index 0000000..055017c
--- /dev/null
+++ b/src/mainboard/amd/lamar/dsdt.asl
@@ -0,0 +1,92 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2013 - 2014 Sage Electronic Engineering, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+/* DefinitionBlock Statement */
+DefinitionBlock (
+ "DSDT.AML", /* Output filename */
+ "DSDT", /* Signature */
+ 0x02, /* DSDT Revision, needs to be 2 for 64bit */
+ "AMD ", /* OEMID */
+ "COREBOOT", /* TABLE ID */
+ 0x00010001 /* OEM Revision */
+ )
+{ /* Start of ASL file */
+ /* #include <arch/x86/acpi/debug.asl> */ /* Include global debug methods if needed */
+
+ /* Globals for the platform */
+ #include "acpi/mainboard.asl"
+
+ /* Describe the USB Overcurrent pins */
+ #include "acpi/usb_oc.asl"
+
+ /* PCI IRQ mapping for the Southbridge */
+ #include <southbridge/amd/agesa/hudson/acpi/pcie.asl>
+
+ /* Describe the processor tree (\_PR) */
+ #include <cpu/amd/agesa/family15tn/acpi/cpu.asl>
+
+ /* Describe the supported Sleep States for this Southbridge */
+ #include <southbridge/amd/agesa/hudson/acpi/sleepstates.asl>
+
+ /* Describe the Sleep Methods (WAK, PTS, GTS, etc.) for this platform */
+ #include "acpi/sleep.asl"
+
+ Scope(\_SB) {
+ /* global utility methods expected within the \_SB scope */
+ #include <arch/x86/acpi/globutil.asl>
+
+ /* Describe IRQ Routing mapping for this platform (within the \_SB scope) */
+ #include "acpi/routing.asl"
+
+ Device(PWRB) {
+ Name(_HID, EISAID("PNP0C0C"))
+ Name(_UID, 0xAA)
+ Name(_PRW, Package () {3, 0x04})
+ Name(_STA, 0x0B)
+ }
+
+ Device(PCI0) {
+ /* Describe the AMD Northbridge */
+ #include <northbridge/amd/agesa/family15_0x30/acpi/northbridge.asl>
+
+ /* Describe the AMD Fusion Controller Hub Southbridge */
+ #include <southbridge/amd/agesa/hudson/acpi/fch.asl>
+
+ }
+
+ /* Describe PCI INT[A-H] for the Southbridge */
+ #include <southbridge/amd/agesa/hudson/acpi/pci_int.asl>
+
+ } /* End Scope(_SB) */
+
+ /* Describe SMBUS for the Southbridge */
+ #include <southbridge/amd/agesa/hudson/acpi/smbus.asl>
+
+ /* Define the General Purpose Events for the platform */
+ #include "acpi/gpe.asl"
+
+ /* Define the Thermal zones and methods for the platform */
+ #include "acpi/thermal.asl"
+
+ /* Define the System Indicators for the platform */
+ #include "acpi/si.asl"
+
+}
+/* End of ASL file */
diff --git a/src/mainboard/amd/lamar/get_bus_conf.c b/src/mainboard/amd/lamar/get_bus_conf.c
new file mode 100644
index 0000000..efade66
--- /dev/null
+++ b/src/mainboard/amd/lamar/get_bus_conf.c
@@ -0,0 +1,150 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <string.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <cpu/amd/amdfam14.h>
+#include "agesawrapper.h"
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+#include "imc.h"
+#endif
+
+/* Global variables for MB layouts and these will be shared by irqtable mptable
+ * and acpi_tables busnum is default.
+ */
+u8 bus_isa;
+u8 bus_sb[16];
+u32 apicid_sb;
+
+/*
+ * Here you only need to set value in pci1234 for HT-IO that could be installed or not
+ * You may need to preset pci1234 for HTIO board,
+ * please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
+ */
+u32 pci1234x[] = {
+ 0x0000ff0,
+};
+
+u32 bus_type[256];
+u32 sbdn_sb;
+
+static u32 get_bus_conf_done = 0;
+
+#if CONFIG_HAVE_ACPI_RESUME
+extern u8 acpi_slp_type;
+#endif
+void get_bus_conf(void)
+{
+ u32 apicid_base;
+ u32 status;
+
+ device_t dev;
+ int i, j;
+
+ if (get_bus_conf_done == 1)
+ return; /* do it only once */
+
+ get_bus_conf_done = 1;
+
+ /*
+ * This is the call to AmdInitLate. It is really in the wrong place, conceptually,
+ * but functionally within the coreboot model, this is the best place to make the
+ * call. The logically correct place to call AmdInitLate is after PCI scan is done,
+ * after the decision about S3 resume is made, and before the system tables are
+ * written into RAM. The routine that is responsible for writing the tables is
+ * "write_tables", called near the end of "hardwaremain". There is no platform
+ * specific entry point between the S3 resume decision point and the call to
+ * "write_tables", and the next platform specific entry points are the calls to
+ * the ACPI table write functions. The first of ose would seem to be the right
+ * place, but other table write functions, e.g. the PIRQ table write function, are
+ * called before the ACPI tables are written. This routine is called at the beginning
+ * of each of the write functions called prior to the ACPI write functions, so this
+ * becomes the best place for this call.
+ */
+#if CONFIG_HAVE_ACPI_RESUME
+ if (acpi_slp_type != 3) {
+ status = agesawrapper_amdinitlate();
+ if(status) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
+ }
+ status = agesawrapper_amdS3Save();
+ if (status) {
+ printk(BIOS_DEBUG, "agesawrapper_amds3save failed: %x \n", status);
+ }
+ }
+#else
+ status = agesawrapper_amdinitlate();
+ if (status)
+ printk(BIOS_DEBUG, "agesawrapper_amdinitlate failed: %x \n", status);
+#endif
+
+// setup_ioapic(0xFEC20000, 5);
+// dev = dev_find_slot(0, PCI_DEVFN(0, 0)); /* clear IoapicSbFeatureEn */
+// pci_write_config32(dev, 0xF8, 0);
+// pci_write_config32(dev, 0xFC, 5); /* TODO: move it to dsdt.asl */
+
+ sbdn_sb = 0;
+
+ memset(bus_sb, 0, sizeof(bus_sb));
+
+ for (i = 0; i < 256; i++) {
+ bus_type[i] = 0; /* default ISA bus. */
+ }
+
+ bus_type[0] = 1; /* pci */
+
+ bus_sb[0] = (pci1234x[0] >> 16) & 0xff;
+
+ /* Hudson */
+ dev = dev_find_slot(bus_sb[0], PCI_DEVFN(sbdn_sb + 0x14, 4));
+
+ if (dev) {
+ bus_sb[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ for (j = bus_sb[1]; j < bus_isa; j++)
+ bus_type[j] = 1;
+ }
+
+ for (i = 0; i < 4; i++) {
+ dev = dev_find_slot(bus_sb[0], PCI_DEVFN(sbdn_sb + 0x14, i));
+ if (dev) {
+ bus_sb[2 + i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
+ bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
+ bus_isa++;
+ }
+ }
+ for (j = bus_sb[2]; j < bus_isa; j++)
+ bus_type[j] = 1;
+
+ /* I/O APICs: APIC ID Version State Address */
+ bus_isa = 10;
+ apicid_base = CONFIG_MAX_CPUS;
+ apicid_sb = apicid_base;
+
+#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
+ /* AMD AGESA does not enable thermal zone, so we enable it here. */
+ enable_imc_thermal_zone();
+#endif
+}
diff --git a/src/mainboard/amd/lamar/irq_tables.c b/src/mainboard/amd/lamar/irq_tables.c
new file mode 100644
index 0000000..1be96e5
--- /dev/null
+++ b/src/mainboard/amd/lamar/irq_tables.c
@@ -0,0 +1,112 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/pci.h>
+#include <string.h>
+#include <stdint.h>
+#include <arch/pirq_routing.h>
+#include <cpu/amd/amdfam15.h>
+
+static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
+ u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
+ u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
+ u8 slot, u8 rfu)
+{
+ pirq_info->bus = bus;
+ pirq_info->devfn = devfn;
+ pirq_info->irq[0].link = link0;
+ pirq_info->irq[0].bitmap = bitmap0;
+ pirq_info->irq[1].link = link1;
+ pirq_info->irq[1].bitmap = bitmap1;
+ pirq_info->irq[2].link = link2;
+ pirq_info->irq[2].bitmap = bitmap2;
+ pirq_info->irq[3].link = link3;
+ pirq_info->irq[3].bitmap = bitmap3;
+ pirq_info->slot = slot;
+ pirq_info->rfu = rfu;
+}
+
+extern u8 bus_isa;
+extern u8 bus_sb[2];
+extern unsigned long sbdn_sb;
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+ struct irq_routing_table *pirq;
+ struct irq_info *pirq_info;
+ u32 slot_num;
+ u8 *v;
+
+ u8 sum = 0;
+ int i;
+
+ get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */
+
+ /* Align the table to be 16 byte aligned. */
+ addr += 15;
+ addr &= ~15;
+
+ /* This table must be betweeen 0xf0000 & 0x100000 */
+ printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
+
+ pirq = (void *)(addr);
+ v = (u8 *) (addr);
+
+ pirq->signature = PIRQ_SIGNATURE;
+ pirq->version = PIRQ_VERSION;
+
+ pirq->rtr_bus = bus_sb[0];
+ pirq->rtr_devfn = ((sbdn_sb + 0x14) << 3) | 4;
+
+ pirq->exclusive_irqs = 0;
+
+ pirq->rtr_vendor = 0x1002;
+ pirq->rtr_device = 0x4384;
+
+ pirq->miniport_data = 0;
+
+ memset(pirq->rfu, 0, sizeof(pirq->rfu));
+
+ pirq_info = (void *)(&pirq->checksum + 1);
+ slot_num = 0;
+
+ /* pci bridge */
+ write_pirq_info(pirq_info, bus_sb[0], ((sbdn_sb + 0x14) << 3) | 4,
+ 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
+ 0);
+ pirq_info++;
+
+ slot_num++;
+
+ pirq->size = 32 + 16 * slot_num;
+
+ for (i = 0; i < pirq->size; i++)
+ sum += v[i];
+
+ sum = pirq->checksum - sum;
+
+ if (sum != pirq->checksum) {
+ pirq->checksum = sum;
+ }
+
+ printk(BIOS_INFO, "write_pirq_routing_table done.\n");
+
+ return (unsigned long)pirq_info;
+}
diff --git a/src/mainboard/amd/lamar/mainboard.c b/src/mainboard/amd/lamar/mainboard.c
new file mode 100644
index 0000000..0440be7
--- /dev/null
+++ b/src/mainboard/amd/lamar/mainboard.c
@@ -0,0 +1,51 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <cpu/x86/msr.h>
+#include "BiosCallOuts.h"
+#include <cpu/amd/mtrr.h>
+#include <device/pci_def.h>
+#include <arch/acpi.h>
+#include <cpu/amd/agesa/s3_resume.h>
+#include "agesawrapper.h"
+
+/*************************************************
+ * enable the dedicated function in lamar board.
+ *************************************************/
+static void mainboard_enable(device_t dev)
+{
+ printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
+ /*
+ * The mainboard is the first place that we get control in ramstage. Check
+ * for S3 resume and call the approriate AGESA/CIMx resume functions.
+ */
+#if CONFIG_HAVE_ACPI_RESUME
+ acpi_slp_type = acpi_get_sleep_type();
+ if (acpi_slp_type == 3)
+ agesawrapper_fchs3earlyrestore();
+#endif
+}
+
+struct chip_operations mainboard_ops = {
+ .enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/amd/lamar/mptable.c b/src/mainboard/amd/lamar/mptable.c
new file mode 100644
index 0000000..9be535e
--- /dev/null
+++ b/src/mainboard/amd/lamar/mptable.c
@@ -0,0 +1,205 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <arch/smp/mpspec.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <string.h>
+#include <stdint.h>
+#include <cpu/amd/amdfam15.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include "southbridge/amd/agesa/hudson/hudson.h" /* pm_ioread() */
+//-#define IO_APIC_ID CONFIG_MAX_PHYSICAL_CPUS + 1
+#define IO_APIC_ID CONFIG_MAX_CPUS
+extern u8 bus_sb[16];
+
+extern u32 bus_type[256];
+extern u32 sbdn_sb;
+extern u32 apicid_sb;
+
+u8 picr_data[0x54] = {
+ 0x1F,0x1f,0x1f,0x1F,0x1F,0x1F,0x1F,0x1F,0x0A,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ 0x09,0x1F,0x1F,0x0B,0x1F,0x0B,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x1F,0x1F,0x1F,0x1F
+};
+u8 intr_data[0x54] = {
+ 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
+ 0x09,0x1F,0x1F,0x10,0x1F,0x10,0x1F,0x10,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x05,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x12,0x11,0x12,0x11,0x12,0x11,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x11,0x13,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x10,0x11,0x12,0x13
+};
+
+static void smp_add_mpc_entry(struct mp_config_table *mc, unsigned length)
+{
+ mc->mpc_length += length;
+ mc->mpc_entry_count++;
+}
+
+static void my_smp_write_bus(struct mp_config_table *mc,
+ unsigned char id, const char *bustype)
+{
+ struct mpc_config_bus *mpc;
+ mpc = smp_next_mpc_entry(mc);
+ memset(mpc, '\0', sizeof(*mpc));
+ mpc->mpc_type = MP_BUS;
+ mpc->mpc_busid = id;
+ memcpy(mpc->mpc_bustype, bustype, sizeof(mpc->mpc_bustype));
+ smp_add_mpc_entry(mc, sizeof(*mpc));
+}
+
+static void *smp_write_config_table(void *v)
+{
+ struct mp_config_table *mc;
+ int bus_isa;
+ u32 dword;
+ u8 byte;
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+
+ mptable_init(mc, LOCAL_APIC_ADDR);
+ memcpy(mc->mpc_oem, "AMD ", 8);
+
+ smp_write_processors(mc);
+
+ get_bus_conf();
+
+ //mptable_write_buses(mc, NULL, &bus_isa);
+ my_smp_write_bus(mc, 0, "PCI ");
+ my_smp_write_bus(mc, 1, "PCI ");
+ bus_isa = 0x02;
+ my_smp_write_bus(mc, bus_isa, "ISA ");
+
+ /* I/O APICs: APIC ID Version State Address */
+
+ dword = 0;
+ dword = pm_read8(0x34) & 0xF0;
+ dword |= (pm_read8(0x35) & 0xFF) << 8;
+ dword |= (pm_read8(0x36) & 0xFF) << 16;
+ dword |= (pm_read8(0x37) & 0xFF) << 24;
+ /* Set IO APIC ID onto IO_APIC_ID */
+ write32 (dword, 0x00);
+ write32 (dword + 0x10, IO_APIC_ID << 24);
+ apicid_sb = IO_APIC_ID;
+ smp_write_ioapic(mc, apicid_sb, 0x21, dword);
+ smp_write_ioapic(mc, apicid_sb+1, 0x21, 0xFEC20000);
+ /* PIC IRQ routine */
+ for (byte = 0x0; byte < sizeof(picr_data); byte ++) {
+ outb(byte, 0xC00);
+ outb(picr_data[byte], 0xC01);
+ }
+
+ /* APIC IRQ routine */
+ for (byte = 0x0; byte < sizeof(intr_data); byte ++) {
+ outb(byte | 0x80, 0xC00);
+ outb(intr_data[byte], 0xC01);
+ }
+
+ /* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+#define IO_LOCAL_INT(type, intr, apicid, pin) \
+ smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
+ mptable_add_isa_interrupts(mc, bus_isa, apicid_sb, 0);
+
+ /* PCI interrupts are level triggered, and are
+ * associated with a specific bus/device/function tuple.
+ */
+#define PCI_INT(bus, dev, int_sign, pin) \
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(int_sign)), apicid_sb, (pin))
+
+ /* Internal VGA */
+ PCI_INT(0x0, 0x01, 0x0, intr_data[0x02]);
+ PCI_INT(0x0, 0x01, 0x1, intr_data[0x03]);
+
+ /* SMBUS */
+ PCI_INT(0x0, 0x14, 0x0, 0x10);
+
+ /* HD Audio */
+ PCI_INT(0x0, 0x14, 0x0, intr_data[0x13]);
+
+ /* USB */
+ PCI_INT(0x0, 0x12, 0x0, intr_data[0x30]);
+ PCI_INT(0x0, 0x12, 0x1, intr_data[0x31]);
+ PCI_INT(0x0, 0x13, 0x0, intr_data[0x32]);
+ PCI_INT(0x0, 0x13, 0x1, intr_data[0x33]);
+ PCI_INT(0x0, 0x16, 0x0, intr_data[0x34]);
+ PCI_INT(0x0, 0x16, 0x1, intr_data[0x35]);
+ PCI_INT(0x0, 0x14, 0x2, intr_data[0x36]);
+
+ /* sata */
+ PCI_INT(0x0, 0x11, 0x0, intr_data[0x40]);
+ PCI_INT(0x0, 0x11, 0x0, intr_data[0x41]);
+
+ /* on board NIC & Slot PCIE. */
+
+ /* PCI slots */
+ /* PCI_SLOT 0. */
+ PCI_INT(bus_sb[1], 0x5, 0x0, 0x14);
+ PCI_INT(bus_sb[1], 0x5, 0x1, 0x15);
+ PCI_INT(bus_sb[1], 0x5, 0x2, 0x16);
+ PCI_INT(bus_sb[1], 0x5, 0x3, 0x17);
+
+ /* PCI_SLOT 1. */
+ PCI_INT(bus_sb[1], 0x6, 0x0, 0x15);
+ PCI_INT(bus_sb[1], 0x6, 0x1, 0x16);
+ PCI_INT(bus_sb[1], 0x6, 0x2, 0x17);
+ PCI_INT(bus_sb[1], 0x6, 0x3, 0x14);
+
+ /* PCI_SLOT 2. */
+ PCI_INT(bus_sb[1], 0x7, 0x0, 0x16);
+ PCI_INT(bus_sb[1], 0x7, 0x1, 0x17);
+ PCI_INT(bus_sb[1], 0x7, 0x2, 0x14);
+ PCI_INT(bus_sb[1], 0x7, 0x3, 0x15);
+
+ PCI_INT(bus_sb[2], 0x0, 0x0, 0x12);
+ PCI_INT(bus_sb[2], 0x0, 0x1, 0x13);
+ PCI_INT(bus_sb[2], 0x0, 0x2, 0x14);
+
+ /* PCIe Lan*/
+ PCI_INT(0x0, 0x06, 0x0, 0x13);
+
+ /* FCH PCIe PortA */
+ PCI_INT(0x0, 0x15, 0x0, 0x10);
+ /* FCH PCIe PortB */
+ PCI_INT(0x0, 0x15, 0x1, 0x11);
+ /* FCH PCIe PortC */
+ PCI_INT(0x0, 0x15, 0x2, 0x12);
+ /* FCH PCIe PortD */
+ PCI_INT(0x0, 0x15, 0x3, 0x13);
+
+ /*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
+ IO_LOCAL_INT(mp_ExtINT, 0, MP_APIC_ALL, 0x0);
+ IO_LOCAL_INT(mp_NMI, 0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ return mptable_finalize(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr, 0);
+ return (unsigned long)smp_write_config_table(v);
+}
diff --git a/src/mainboard/amd/lamar/romstage.c b/src/mainboard/amd/lamar/romstage.c
new file mode 100644
index 0000000..e7fb51c
--- /dev/null
+++ b/src/mainboard/amd/lamar/romstage.c
@@ -0,0 +1,168 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 - 2014 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <string.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <arch/stages.h>
+#include <device/pnp_def.h>
+#include <arch/cpu.h>
+#include <cpu/x86/lapic.h>
+#include <console/console.h>
+#include <console/loglevel.h>
+#include "cpu/amd/car.h"
+#include "agesawrapper.h"
+#include "cpu/x86/bist.h"
+#include "cpu/x86/lapic.h"
+#include "southbridge/amd/agesa/hudson/hudson.h"
+#include "cpu/amd/agesa/s3_resume.h"
+#include "src/drivers/pc80/i8254.c"
+#include "src/drivers/pc80/i8259.c"
+#include "cbmem.h"
+
+#include "superio/fintek/common/fintek.h"
+#include "superio/fintek/f81216h/f81216h.h"
+#define SERIAL_DEV PNP_DEV(0x4e, F81216H_SP1)
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ u32 val;
+#if CONFIG_HAVE_ACPI_RESUME
+ void *resume_backup_memory;
+#endif
+ val = agesawrapper_amdinitmmio();
+
+ outb(0xD2, 0xcd6);
+ outb(0x00, 0xcd7);
+ outb(0x24, 0xCD6);
+ outb(0x01, 0xcd7);
+ *(volatile u32 *) (0xFED80000 + 0xE00 + 0x28) |= 1 << 18; /* 24Mhz */
+ *(volatile u32 *) (0xFED80000 + 0xE00 + 0x40) &= ~(1 << 2); /* 24Mhz */
+
+ hudson_lpc_port80();
+
+ if (!cpu_init_detectedx && boot_cpu()) {
+ post_code(0x30);
+ fintek_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+ post_code(0x31);
+ console_init();
+ }
+
+ /* Halt if there was a built in self test failure */
+ post_code(0x34);
+ report_bist_failure(bist);
+
+ /* Load MPB */
+ val = cpuid_eax(1);
+ printk(BIOS_DEBUG, "BSP Family_Model: %08x \n", val);
+ printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx \n", cpu_init_detectedx);
+
+ post_code(0x37);
+ val = agesawrapper_amdinitreset();
+ if(val) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitreset failed: %x \n", val);
+ }
+
+ post_code(0x38);
+ printk(BIOS_DEBUG, "Got past hudson_early_setup\n");
+
+ post_code(0x39);
+
+ val = agesawrapper_amdinitearly ();
+ if(val) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitearly failed: %x \n", val);
+ }
+ printk(BIOS_DEBUG, "Got past agesawrapper_amdinitearly\n");
+
+#if CONFIG_HAVE_ACPI_RESUME
+ if (!acpi_is_wakeup_early()) { /* Check for S3 resume */
+#endif
+ post_code(0x40);
+ val = agesawrapper_amdinitpost ();
+ if(val) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitpost failed: %x \n", val);
+ }
+ printk(BIOS_DEBUG, "Got past agesawrapper_amdinitpost\n");
+
+ post_code(0x41);
+ val = agesawrapper_amdinitenv ();
+ if(val) {
+ printk(BIOS_DEBUG, "agesawrapper_amdinitenv failed: %x \n", val);
+ }
+ printk(BIOS_DEBUG, "Got past agesawrapper_amdinitenv\n");
+ disable_cache_as_ram();
+#if CONFIG_HAVE_ACPI_RESUME
+ } else { /* S3 detect */
+ printk(BIOS_INFO, "S3 detected\n");
+
+ post_code(0x60);
+ printk(BIOS_DEBUG, "agesawrapper_amdinitresume ");
+ val = agesawrapper_amdinitresume();
+ if (val)
+ printk(BIOS_DEBUG, "error level: %x \n", val);
+ else
+ printk(BIOS_DEBUG, "passed.\n");
+
+ printk(BIOS_DEBUG, "agesawrapper_amds3laterestore ");
+ val = agesawrapper_amds3laterestore ();
+ if (val)
+ printk(BIOS_DEBUG, "error level: %x \n", val);
+ else
+ printk(BIOS_DEBUG, "passed.\n");
+
+ post_code(0x61);
+ printk(BIOS_DEBUG, "Find resume memory location\n");
+ resume_backup_memory = (void *)backup_resume();
+
+ post_code(0x62);
+ printk(BIOS_DEBUG, "Move CAR stack.\n");
+ move_stack_high_mem();
+ printk(BIOS_DEBUG, "stack moved to: 0x%x\n", (u32) (resume_backup_memory + HIGH_MEMORY_SAVE));
+
+ post_code(0x63);
+ disable_cache_as_ram();
+ printk(BIOS_DEBUG, "CAR disabled.\n");
+ set_resume_cache();
+
+ /*
+ * Copy the system memory that is in the ramstage area to the
+ * reserved area.
+ */
+ if (resume_backup_memory)
+ memcpy(resume_backup_memory, (void *)(CONFIG_RAMBASE), HIGH_MEMORY_SAVE);
+
+ printk(BIOS_DEBUG, "System memory saved. OK to load ramstage.\n");
+ }
+#endif
+
+ /* Initialize i8259 pic */
+ post_code(0x41);
+ setup_i8259 ();
+
+ /* Initialize i8254 timers */
+ post_code(0x42);
+ setup_i8254 ();
+
+ post_code(0x50);
+ copy_and_run();
+
+ post_code(0x54); /* Should never see this post code. */
+}
More information about the coreboot-gerrit
mailing list